The functionality described in Commit 61bef9e68d ("ASoC: SOF: Intel: hda: enforce exclusion between HDaudio and SoundWire")
does not seem to be properly implemented with two issues that need to
be corrected.
a) The test used is incorrect when DisplayAudio codecs are not supported.
b) Conversely when only Display Audio codecs can be found, we do want
to start the SoundWire links, if any. That will help add the relevant
topologies and machine descriptors, and identify cases where the
SoundWire information in ACPI needs to be modified with a quirk.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230606222529.57156-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
An unusually large set of patches to deal with new SoundWire-based
platforms.
The bulk of the patches addresses support for MTL using RT712, RT713,
MAX98363, CS42L42 jack codec and amplifiers. The sof_sdw machine
driver had to be updated to remove limitations on number of codecs per
links, dai types, dai naming, etc. We also moved parts of the Realtek
and Maxim support in common code to avoid duplication.
Community users also reported two Dell SKUs which were not supported
in the mainline due to hardware permutations.
Merge series from Trevor Wu <trevor.wu@mediatek.com>:
In the series, we extend the capability of mt8188-mt6359 driver.
The following changes are included.
1. Divide ADDA BE dai into two dais for SOF.
2. Register hdmi/dp jack pins.
3. dai_fmt can be configured from device tree.
4. Add some I2S codecs support.
In addition, new compatible string "mediatek,mt8188-nau8825" is
included for a new board support.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This patchset adds the changes required for the hda-dai extension to
deal with SSSP/DMIC/SoundWire starting with LunarLake, as well as the
new TLV IPC to provide the DMA stream_tag to the DSP firmware.
LunarLake support for SSP/DMIC is ready but is gated by the patch
"ASoC: SOF: Intel: shim: add enum for ACE 2.0 IP used in LunarLake"
currently only present in the SoundWire tree.
make KCFLAGS='-fanalyzer' sound/soc/sof/intel/ reports several NULL
pointer dereference paths.
Example log:
ops = hda_dai_get_ops(substream, cpu_dai);
| | ^~~~~
| | |
| | (14) return of NULL to ‘non_hda_dai_hw_params’ from ‘hda_dai_get_ops’
| 353 | sdev = widget_to_sdev(w);
| 354 | hext_stream = ops->get_hext_stream(sdev, cpu_dai, substream);
| | ~~~~~~~~~~~~~~~~~~~~
| | |
| | (15) dereference of NULL ‘ops’
The function hda_dai_get_ops() can return NULL, but the return value
is not checked across the board. It's not a problem today, since we do
check in the first use of the function, but static analysis tools are
not aware of the different ALSA stages. Rather than argue forever,
let's just add the error checks consistently and make sure this tool
can be added to the CI checks.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To support multiple codecs per SoundWire link, we have to assign multiple
CPU DAIs to different DAI links sharing the same physical link. This is
not possible with the existing code since we assume that only 'Pin2' is
used for playback and 'Pin3' used for capture - additional DAIs cannot
be handled.
This patch enables more CPU DAIs to be used, e.g. "SDW0 Pin2",
"SDW0 Pin3", and "SDW0 Pin4" for SDW0-Playback-SimpleJack,
SDW0-Capture-SimpleJack, and SDW0-Playback-SmartAmp DAI links on physical
link #0.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We append codec type to dailink name to distinguish different dailink
on the same sdw link and direction. But we could create multi dailinks
for a codec and the dailink name will be duplicated if we append codec
type to the dailink name.
Appending dai type instead of codec type can solve the issue.
For example, if a codec supports JACK on dai 0 and AMP on dai 1, the
existing code will create dailinks
SDW0-Playback-SimpleJack or SDW0-Playback-SmartAmp for both dailinks,
and it will be SDW0-Playback-SimpleJack for dailink 0 and
SDW0-Playback-SmartAmp for dailink 1 after this change.
Then codec type is not used any more and can be removed.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code create a dailink for a codec. However, we may need
multi dailinks for a codec. This commit adds a new struct in
sof_sdw_codec_info{} to store the dai info of a codec.
The initial assumption if that we will create at most 3 dailink types
for a codec, since this is the max known with upcoming SDCA devices. We
may need to increase this number as new SDCA 'functions' become available.
One strong assumption is that all dailinks exposed are independent, as per
SDCA directions.
This commit just moves some items into the new sof_sdw_dai_info struct.
There is no function changed. Multi dais supported will be added in the
follow up commits.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The vangogh driver just gained a link time dependency that now causes
randconfig builds to fail:
x86_64-linux-ld: sound/soc/amd/vangogh/pci-acp5x.o: in function `snd_acp5x_probe':
pci-acp5x.c:(.text+0xbb): undefined reference to `snd_amd_acp_find_config'
Fixes: e89f45edb7 ("ASoC: amd: vangogh: Add check for acp config flags in vangogh platform")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230605085839.2157268-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The vangogh driver just gained a link time dependency that now causes
randconfig builds to fail:
x86_64-linux-ld: sound/soc/amd/vangogh/pci-acp5x.o: in function `snd_acp5x_probe':
pci-acp5x.c:(.text+0xbb): undefined reference to `snd_amd_acp_find_config'
Fixes: e89f45edb7 ("ASoC: amd: vangogh: Add check for acp config flags in vangogh platform")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230602124447.863476-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add compatible string "mediatek,mt8188-nau8825" to support new board
with nau8825 codec.
Introduce two properties "dai-format" and "mediatek,clk-provider" under
dai-link subnode to configure dai-link parameters via dts.
"codec" property is removed from required property of dai-link subnode.
For co-clock case, it's possible two dai-links should be configured to
the same dai format, but only one cpu dai is bound with codec.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20230526093150.22923-8-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When a widget is added to dapm via snd_soc_dapm_new_widgets,
dapm_debugfs_add_widget is also called to create a corresponding debugfs
file. However, when a widget is freed by snd_soc_dapm_free_widget, the
corresponding debugfs is not cleared. As a result, the freed widget is
still seen in the dapm directory.
This patch adds dapm_debugfs_free_widget to free the debugfs of a
specified widget, and it's called at snd_soc_dapm_free_widget to clean
up the debugfs for freed widget.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230526093150.22923-6-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are two changes included in the patch.
First, add set_dailink_daifmt() function, so dai_fmt can be updated by
the configuration in dai-link sub node.
Second, remove codec phandle from required property in dai-link sub node.
For example, user possibly needs to update dai-format for all etdm
co-clock dai-links, but codec doesn't need to be specified in capture
dai-link for a speaker amp.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230526093150.22923-5-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
