Currently, if a torture scenario requires more CPUs than are present
on the build system, kvm.sh and friends limit the CPUs available to
that scenario. This makes total sense when the build system and the
system running the scenarios are one and the same, but not so much when
remote systems might well have more CPUs.
This commit therefore introduces a --remote flag to kvm.sh that suppresses
this CPU-limiting behavior, and causes kvm-remote.sh to use this flag.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In a long-duration kvm-remote.sh run, almost all of the remote accesses will
be simple file-existence checks. These are thus the most likely to be caught
out by network failures, which do happen from time to time.
This commit therefore takes a first step towards tolerating temporary
network outages by making the file-existence checks repeat in the face of
such an outage. They also print a message every minute during a outage,
allowing the user to take appropriate action.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
It will frequently be the case that rcu_torture_boost() will get a
->start_gp_poll() cookie that needs almost all of the current grace period
plus an additional grace period to elapse before ->poll_gp_state() will
return true. It is quite possible that the current grace period will have
(say) two seconds of stall by a CPU failing to pass through a quiescent
state, followed by 300 milliseconds of delay due to a preempted reader.
The next grace period might suffer only one second of stall by a CPU,
followed by another 300 milliseconds of delay due to a preempted reader.
This is an example of RCU priority boosting doing its job, but the full
elapsed time of 3.6 seconds exceeds the 3.5-second limit. In addition,
there is no CPU stall in force at the 3.5-second mark, so this would
nevertheless currently be counted as an RCU priority boosting failure.
This commit therefore avoids this sort of false positive by resetting
the gp_state_time timestamp any time that the current grace period is
being blocked by a CPU. This results in extremely frequent calls to
the ->check_boost_failed() function, so this commit provides a lockless
fastpath that is selected by supplying a NULL CPU-number pointer.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, rcu_torture_boost() runs CPU-bound at real-time priority
to force RCU priority inversions. It then checks that grace periods
progress during this CPU-bound time. If grace periods fail to progress,
it reports and RCU priority boosting failure.
However, it is possible (and sometimes does happen) that the grace period
fails to progress due to a CPU failing to pass through a quiescent state
for an extended time period (3.5 seconds by default). This can happen
due to vCPU preemption, long-running interrupts, and much else besides.
There is nothing that RCU priority boosting can do about these situations,
and so they should not be counted as RCU priority boosting failures.
This commit therefore checks for CPUs (as opposed to preempted tasks)
holding up a grace period, and flags the resulting RCU priority boosting
failures, but does not splat nor count them as errors. It does rate-limit
them to avoid flooding the console log.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds the BUSTED-BOOST rcutorture scenario, which can be
used to test rcutorture's ability to test RCU priority boosting.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
It is possible that a delayed grace period that rcu_torture_boost()
was polling for ended while rcu_torture_boost_failed() was printing the
failure splat. It would be good to know when this happens. This commit
therefore has rcu_torture_boost_failed() recheck the grace period after
printing the splat, and printing a message indicating whether or not
the grace period has ended.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit consolidates two loops in rcu_torture_boost(), one of which
counts the number of boost-test episodes and the other of which computes
the start time of the next episode, into one loop that does both with but
a single acquisition of boost_mutex. This means that the count of the
number of boost-test episodes is incremented after an episode completes
rather than before it starts, but it also avoids the over-counting that
was possible previously.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
If an rcu_torture_boost() kthread determines that its grace period
has not yet ended, it invokes rcu_torture_boost_failed() which checks
whether enough time has elapsed for this to be considered a failure of
RCU priority boosting, and, if so, flags the error.
Unfortunately, that kthread might be preempted for some seconds between
the time that it checks the grace period and the time that it checks the
time. This delay can result in a false positive, featuring a complaint
that a particular grace period has not ended, followed by a diagnostic
dump featuring a much later grace period.
This commit avoids these false positives by rechecking for the end of
the grace period after the time check.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Some of the code invoked directly and indirectly from kvm.sh parses
the output of commands. This parsing assumes English, which can cause
failures if the user has set some other language. In a few cases,
there are language-independent commands available, but this is not
always the case. Therefore, as an alternative to polyglot parsing,
this commit sets the LANG environment variable to en_US.UTF-8.
Reported-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Grepping for "CPU" on lscpu output isn't always successful, depending
on the local language setting. As a result, the build can be aborted
early with:
"make: the '-j' option requires a positive integer argument"
This commit therefore uses the human-language-independent approach
available via the getconf command, both in kvm-build.sh and in
kvm-remote.sh.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, rcutorture's testing of RCU priority boosting insists not
only that grace periods complete, but also that callbacks be invoked.
Although this is in fact what the user would want, ensuring that there
is sufficient CPU bandwidth devoted to callback execution is in fact
the user's responsibility. One could argue that rcutorture can take on
that responsibility, which is true in theory. But in practice, ensuring
sufficient CPU bandwidth to ksoftirqd, any rcuc kthreads, and any rcuo
kthreads is not particularly consistent with rcutorture's main job,
that of stress-testing RCU. In addition, if the system administrator
(say) makes very poor choices when pinning rcuo kthreads and then runs
rcutorture, there really isn't much rcutorture can do.
Besides, RCU priority boosting only boosts lagging readers, not all the
machinery required to invoke callbacks in a timely fashion.
This commit therefore switches rcutorture's evaluation of RCU priority
boosting from callback execution to grace-period completion by using
the new start_poll_synchronize_rcu() and poll_state_synchronize_rcu()
functions. When rcutorture is built in (as in when there is no innocent
workload to inconvenience), the ksoftirqd ktheads are boosted to real-time
priority 2 in order to allow timeouts to work properly in the face of
rcutorture's testing of RCU priority boosting.
Indeed, it is not as easy as it looks to create a reliable test of RCU
priority boosting without destroying the rest of the kernel!
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, kvm-find-errors.sh assumes that if "--buildonly" appears in
the log file, then the run did builds but ran no kernels. This breaks
with kvm-remote.sh, which uses kvm.sh to do a build, then kvm-again.sh
to run the kernels built on remote systems. This commit therefore adds
a check for a kvm-remote.sh run.
While in the area, this commit checks for "--build-only" as well as
"--build-only".
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Given remote rcutorture runs, it is quite possible that the build system
will have fewer CPUs than the system(s) running the actual test scenarios.
In such cases, using the number of CPUs on the test systems can overload
the build system, slowing down the build or, worse, OOMing the build
system. This commit therefore uses the build system's CPU count to set
N in "make -jN", and by tradition sets "N" to double the CPU count.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit reduces duplicate code by making kvm.sh use the new
kvm-end-run-stats.sh script rather than taking its historical approach
of open-coding it.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit abstractst the end-of-run summary from kvm-again.sh, and,
while in the area, brings its format into line with that of kvm.sh.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The kvm-again.sh script relies on shell comments added to the qemu-cmd
file, but this means that code extracting values from the QEMU command in
this file must grep out those commment. Which kvm-recheck-rcu.sh failed
to do, which destroyed its grace-period-per-second calculation. This
commit therefore adds the needed "grep -v '^#'" to kvm-recheck-rcu.sh.
Fixes: 315957cad4 ("torture: Prepare for splitting qemu execution from kvm-test-1-run.sh")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a (*readlock_held)() function pointer to the
rcu_torture_ops structure in order to make the rcu_torture_one_read()
function's rcu_dereference_check() lockdep expression more appropriate
for a given run.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds scale_type of acqrel, lock, and lock-irq to
test acquisition and release. Note that the refscale.nreaders=1
module parameter is required if you wish to test uncontended locking.
In contrast, acqrel uses a per-CPU variable, so should be just fine with
large values of the refscale.nreaders=1 module parameter.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a kvm-remote.sh script that prepares a tarball that
is then downloaded to the remote system(s) and executed. The user is
responsible for having set up the remote systems to run qemu, but all the
kernel builds are done on the system running the kvm-remote.sh script.
The user is also responsible for setting up the remote systems so that
ssh can be run non-interactively, given that ssh is used to poll the
remote systems in order to detect completion of each batch.
See the script's header comment for usage information.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
It is no longer possible to disable CPU hotplug in many configurations,
which means that the CONFIG_HOTPLUG_CPU=n lines in rcuscale's Kconfig
options are just a source of useless diagnostics. In addition, rcuscale
doesn't do CPU-hotplug operations in any case. This commit therefore
changes these lines to read CONFIG_HOTPLUG_CPU=y.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
It is no longer possible to disable CPU hotplug in many configurations,
which means that the CONFIG_HOTPLUG_CPU=n lines in refscale's Kconfig
options are just a source of useless diagnostics. In addition, refscale
doesn't do CPU-hotplug operations in any case. This commit therefore
changes these lines to read CONFIG_HOTPLUG_CPU=y.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit saves a few lines of code by making kvm-again.sh use the
"scenarios" file rather than the "batches" file, both of which are
generated by kvm.sh.
This results in a break point because new versions of kvm-again.sh cannot
handle "res" directories produced by old versions of kvm.sh, which lack
the "scenarios" file. In the unlikely event that this becomes a problem,
a trivial script suffices to convert the "batches" file to a "scenarios"
file, and this script may be easily extracted from kvm.sh.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds "--dryrun scenarios" to kvm.sh, which prints something
like this:
1. TREE03
2. TREE07
3. SRCU-P SRCU-N
4. TREE01 TRACE01
5. TREE02 TRACE02
6. TREE04 RUDE01 TASKS01
7. TREE05 TASKS03 SRCU-T SRCU-U
8. TASKS02 TINY01 TINY02 TREE09
This format is more convenient for scripts that run batches of scenarios.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Although "eval" was removed from torture.sh, that commit failed to
update the KCSAN instance of $* to "$@". This results in failures when
(for example) --bootargs is given more than one argument. This commit
therefore makes this change.
There is one remaining instance of $* in torture.sh, but this
is used only in the "echo" command, where quoting doesn't matter
so much.
Fixes: 197220d4a3 ("torture: Remove use of "eval" in torture.sh")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Commit b9d79e4ca4 ("fbmem: Mark proc_fb_seq_ops as __maybe_unused")
places the '__maybe_unused' in an entirely incorrect location between
the "struct" keyword and the structure name.
It's a wonder that gcc accepts that silently, but clang quite reasonably
warns about it:
drivers/video/fbdev/core/fbmem.c:736:21: warning: attribute declaration must precede definition [-Wignored-attributes]
static const struct __maybe_unused seq_operations proc_fb_seq_ops = {
^
Fix it.
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull drm fixes from Dave Airlie:
"Bit later than usual, I queued them all up on Friday then promptly
forgot to write the pull request email. This is mainly amdgpu fixes,
with some radeon/msm/fbdev and one i915 gvt fix thrown in.
amdgpu:
- MPO hang workaround
- Fix for concurrent VM flushes on vega/navi
- dcefclk is not adjustable on navi1x and newer
- MST HPD debugfs fix
- Suspend/resumes fixes
- Register VGA clients late in case driver fails to load
- Fix GEM leak in user framebuffer create
- Add support for polaris12 with 32 bit memory interface
- Fix duplicate cursor issue when using overlay
- Fix corruption with tiled surfaces on VCN3
- Add BO size and stride check to fix BO size verification
radeon:
- Fix off-by-one in power state parsing
- Fix possible memory leak in power state parsing
msm:
- NULL ptr dereference fix
fbdev:
- procfs disabled warning fix
i915:
- gvt: Fix a possible division by zero in vgpu display rate
calculation"
* tag 'drm-next-2021-05-10' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: Use device specific BO size & stride check.
drm/amdgpu: Init GFX10_ADDR_CONFIG for VCN v3 in DPG mode.
drm/amd/pm: initialize variable
drm/radeon: Avoid power table parsing memory leaks
drm/radeon: Fix off-by-one power_state index heap overwrite
drm/amd/display: Fix two cursor duplication when using overlay
drm/amdgpu: add new MC firmware for Polaris12 32bit ASIC
fbmem: Mark proc_fb_seq_ops as __maybe_unused
drm/msm/dpu: Delete bonkers code
drm/i915/gvt: Prevent divided by zero when calculating refresh rate
amdgpu: fix GEM obj leak in amdgpu_display_user_framebuffer_create
drm/amdgpu: Register VGA clients after init can no longer fail
drm/amdgpu: Handling of amdgpu_device_resume return value for graceful teardown
drm/amdgpu: fix r initial values
drm/amd/display: fix wrong statement in mst hpd debugfs
amdgpu/pm: set pp_dpm_dcefclk to readonly on NAVI10 and newer gpus
amdgpu/pm: Prevent force of DCEFCLK on NAVI10 and SIENNA_CICHLID
drm/amdgpu: fix concurrent VM flushes on Vega/Navi v2
drm/amd/display: Reject non-zero src_y and src_x for video planes
Pull block fix from Jens Axboe:
"Turns out the bio max size change still has issues, so let's get it
reverted for 5.13-rc1. We'll shake out the issues there and defer it
to 5.14 instead"
* tag 'block-5.13-2021-05-09' of git://git.kernel.dk/linux-block:
Revert "bio: limit bio max size"
Pull cifs fixes from Steve French:
"Three small SMB3 chmultichannel related changesets (also for stable)
from the SMB3 test event this week.
The other fixes are still in review/testing"
* tag '5.13-rc-smb3-part3' of git://git.samba.org/sfrench/cifs-2.6:
smb3: if max_channels set to more than one channel request multichannel
smb3: do not attempt multichannel to server which does not support it
smb3: when mounting with multichannel include it in requested capabilities
Pull scheduler fixes from Thomas Gleixner:
"A set of scheduler updates:
- Prevent PSI state corruption when schedule() races with cgroup
move.
A recent commit combined two PSI callbacks to reduce the number of
cgroup tree updates, but missed that schedule() can drop rq::lock
for load balancing, which opens the race window for
cgroup_move_task() which then observes half updated state.
The fix is to solely use task::ps_flags instead of looking at the
potentially mismatching scheduler state
- Prevent an out-of-bounds access in uclamp caused bu a rounding
division which can lead to an off-by-one error exceeding the
buckets array size.
- Prevent unfairness caused by missing load decay when a task is
attached to a cfs runqueue.
The old load of the task was attached to the runqueue and never
removed. Fix it by enforcing the load update through the hierarchy
for unthrottled run queue instances.
- A documentation fix fot the 'sched_verbose' command line option"
* tag 'sched-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix unfairness caused by missing load decay
sched: Fix out-of-bound access in uclamp
psi: Fix psi state corruption when schedule() races with cgroup move
sched,doc: sched_debug_verbose cmdline should be sched_verbose
Pull locking fixes from Thomas Gleixner:
"A set of locking related fixes and updates:
- Two fixes for the futex syscall related to the timeout handling.
FUTEX_LOCK_PI does not support the FUTEX_CLOCK_REALTIME bit and
because it's not set the time namespace adjustment for clock
MONOTONIC is applied wrongly.
FUTEX_WAIT cannot support the FUTEX_CLOCK_REALTIME bit because its
always a relative timeout.
- Cleanups in the futex syscall entry points which became obvious
when the two timeout handling bugs were fixed.
- Cleanup of queued_write_lock_slowpath() as suggested by Linus
- Fixup of the smp_call_function_single_async() prototype"
* tag 'locking-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Make syscall entry points less convoluted
futex: Get rid of the val2 conditional dance
futex: Do not apply time namespace adjustment on FUTEX_LOCK_PI
Revert 337f13046f ("futex: Allow FUTEX_CLOCK_REALTIME with FUTEX_WAIT op")
locking/qrwlock: Cleanup queued_write_lock_slowpath()
smp: Fix smp_call_function_single_async prototype
Pull x86 perf fix from Borislav Petkov:
"Handle power-gating of AMD IOMMU perf counters properly when they are
used"
* tag 'perf_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/events/amd/iommu: Fix invalid Perf result due to IOMMU PMC power-gating
Pull x86 fixes from Borislav Petkov:
"A bunch of things accumulated for x86 in the last two weeks:
- Fix guest vtime accounting so that ticks happening while the guest
is running can also be accounted to it. Along with a consolidation
to the guest-specific context tracking helpers.
- Provide for the host NMI handler running after a VMX VMEXIT to be
able to run on the kernel stack correctly.
- Initialize MSR_TSC_AUX when RDPID is supported and not RDTSCP (virt
relevant - real hw supports both)
- A code generation improvement to TASK_SIZE_MAX through the use of
alternatives
- The usual misc and related cleanups and improvements"
* tag 'x86_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
KVM: x86: Consolidate guest enter/exit logic to common helpers
context_tracking: KVM: Move guest enter/exit wrappers to KVM's domain
context_tracking: Consolidate guest enter/exit wrappers
sched/vtime: Move guest enter/exit vtime accounting to vtime.h
sched/vtime: Move vtime accounting external declarations above inlines
KVM: x86: Defer vtime accounting 'til after IRQ handling
context_tracking: Move guest exit vtime accounting to separate helpers
context_tracking: Move guest exit context tracking to separate helpers
KVM/VMX: Invoke NMI non-IST entry instead of IST entry
x86/cpu: Remove write_tsc() and write_rdtscp_aux() wrappers
x86/cpu: Initialize MSR_TSC_AUX if RDTSCP *or* RDPID is supported
x86/resctrl: Fix init const confusion
x86: Delete UD0, UD1 traces
x86/smpboot: Remove duplicate includes
x86/cpu: Use alternative to generate the TASK_SIZE_MAX constant
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to avoid over-allocating the kernel's mapping on !MMU systems,
which could lead to up to 2MiB of lost memory
- The SiFive address extension errata only manifest on rv64, they are
now disabled on rv32 where they are unnecessary
- A pair of late-landing cleanups
* tag 'riscv-for-linus-5.13-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: remove unused handle_exception symbol
riscv: Consistify protect_kernel_linear_mapping_text_rodata() use
riscv: enable SiFive errata CIP-453 and CIP-1200 Kconfig only if CONFIG_64BIT=y
riscv: Only extend kernel reservation if mapped read-only
intel_dp_check_mst_status() uses a 14-byte array to read the DPRX Event
Status Indicator data, but then passes that buffer at offset 10 off as
an argument to drm_dp_channel_eq_ok().
End result: there are only 4 bytes remaining of the buffer, yet
drm_dp_channel_eq_ok() wants a 6-byte buffer. gcc-11 correctly warns
about this case:
drivers/gpu/drm/i915/display/intel_dp.c: In function ‘intel_dp_check_mst_status’:
drivers/gpu/drm/i915/display/intel_dp.c:3491:22: warning: ‘drm_dp_channel_eq_ok’ reading 6 bytes from a region of size 4 [-Wstringop-overread]
3491 | !drm_dp_channel_eq_ok(&esi[10], intel_dp->lane_count)) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/display/intel_dp.c:3491:22: note: referencing argument 1 of type ‘const u8 *’ {aka ‘const unsigned char *’}
In file included from drivers/gpu/drm/i915/display/intel_dp.c:38:
include/drm/drm_dp_helper.h:1466:6: note: in a call to function ‘drm_dp_channel_eq_ok’
1466 | bool drm_dp_channel_eq_ok(const u8 link_status[DP_LINK_STATUS_SIZE],
| ^~~~~~~~~~~~~~~~~~~~
6:14 elapsed
This commit just extends the original array by 2 zero-initialized bytes,
avoiding the warning.
There may be some underlying bug in here that caused this confusion, but
this is at least no worse than the existing situation that could use
random data off the stack.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull more SCSI updates from James Bottomley:
"This is a set of minor fixes in various drivers (qla2xxx, ufs,
scsi_debug, lpfc) one doc fix and a fairly large update to the fnic
driver to remove the open coded iteration functions in favour of the
scsi provided ones"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: fnic: Use scsi_host_busy_iter() to traverse commands
scsi: fnic: Kill 'exclude_id' argument to fnic_cleanup_io()
scsi: scsi_debug: Fix cmd_per_lun, set to max_queue
scsi: ufs: core: Narrow down fast path in system suspend path
scsi: ufs: core: Cancel rpm_dev_flush_recheck_work during system suspend
scsi: ufs: core: Do not put UFS power into LPM if link is broken
scsi: qla2xxx: Prevent PRLI in target mode
scsi: qla2xxx: Add marginal path handling support
scsi: target: tcmu: Return from tcmu_handle_completions() if cmd_id not found
scsi: ufs: core: Fix a typo in ufs-sysfs.c
scsi: lpfc: Fix bad memory access during VPD DUMP mailbox command
scsi: lpfc: Fix DMA virtual address ptr assignment in bsg
scsi: lpfc: Fix illegal memory access on Abort IOCBs
scsi: blk-mq: Fix build warning when making htmldocs
Pull more Kbuild updates from Masahiro Yamada:
- Convert sh and sparc to use generic shell scripts to generate the
syscall headers
- refactor .gitignore files
- Update kernel/config_data.gz only when the content of the .config
is really changed, which avoids the unneeded re-link of vmlinux
- move "remove stale files" workarounds to scripts/remove-stale-files
- suppress unused-but-set-variable warnings by default for Clang
as well
- fix locale setting LANG=C to LC_ALL=C
- improve 'make distclean'
- always keep intermediate objects from scripts/link-vmlinux.sh
- move IF_ENABLED out of <linux/kconfig.h> to make it self-contained
- misc cleanups
* tag 'kbuild-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
linux/kconfig.h: replace IF_ENABLED() with PTR_IF() in <linux/kernel.h>
kbuild: Don't remove link-vmlinux temporary files on exit/signal
kbuild: remove the unneeded comments for external module builds
kbuild: make distclean remove tag files in sub-directories
kbuild: make distclean work against $(objtree) instead of $(srctree)
kbuild: refactor modname-multi by using suffix-search
kbuild: refactor fdtoverlay rule
kbuild: parameterize the .o part of suffix-search
arch: use cross_compiling to check whether it is a cross build or not
kbuild: remove ARCH=sh64 support from top Makefile
.gitignore: prefix local generated files with a slash
kbuild: replace LANG=C with LC_ALL=C
Makefile: Move -Wno-unused-but-set-variable out of GCC only block
kbuild: add a script to remove stale generated files
kbuild: update config_data.gz only when the content of .config is changed
.gitignore: ignore only top-level modules.builtin
.gitignore: move tags and TAGS close to other tag files
kernel/.gitgnore: remove stale timeconst.h and hz.bc
usr/include: refactor .gitignore
genksyms: fix stale comment
...
Mounting with "multichannel" is obviously implied if user requested
more than one channel on mount (ie mount parm max_channels>1).
Currently both have to be specified. Fix that so that if max_channels
is greater than 1 on mount, enable multichannel rather than silently
falling back to non-multichannel.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-By: Tom Talpey <tom@talpey.com>
Cc: <stable@vger.kernel.org> # v5.11+
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
We were ignoring CAP_MULTI_CHANNEL in the server response - if the
server doesn't support multichannel we should not be attempting it.
See MS-SMB2 section 3.2.5.2
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-By: Tom Talpey <tom@talpey.com>
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull powerpc updates and fixes from Michael Ellerman:
"A bit of a mixture of things, tying up some loose ends.
There's the removal of the nvlink code, which dependend on a commit in
the vfio tree. Then the enablement of huge vmalloc which was in next
for a few weeks but got dropped due to conflicts. And there's also a
few fixes.
Summary:
- Remove the nvlink support now that it's only user has been removed.
- Enable huge vmalloc mappings for Radix MMU (P9).
- Fix KVM conversion to gfn-based MMU notifier callbacks.
- Fix a kexec/kdump crash with hot plugged CPUs.
- Fix boot failure on 32-bit with CONFIG_STACKPROTECTOR.
- Restore alphabetic order of the selects under CONFIG_PPC.
Thanks to: Christophe Leroy, Christoph Hellwig, Nicholas Piggin,
Sandipan Das, and Sourabh Jain"
* tag 'powerpc-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV: Fix conversion to gfn-based MMU notifier callbacks
powerpc/kconfig: Restore alphabetic order of the selects under CONFIG_PPC
powerpc/32: Fix boot failure with CONFIG_STACKPROTECTOR
powerpc/powernv/memtrace: Fix dcache flushing
powerpc/kexec_file: Use current CPU info while setting up FDT
powerpc/64s/radix: Enable huge vmalloc mappings
powerpc/powernv: remove the nvlink support
In the SMB3/SMB3.1.1 negotiate protocol request, we are supposed to
advertise CAP_MULTICHANNEL capability when establishing multiple
channels has been requested by the user doing the mount. See MS-SMB2
sections 2.2.3 and 3.2.5.2
Without setting it there is some risk that multichannel could fail
if the server interpreted the field strictly.
Reviewed-By: Tom Talpey <tom@talpey.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.13-rc1, including fixes from bpf, can and
netfilter trees. Self-contained fixes, nothing risky.
Current release - new code bugs:
- dsa: ksz: fix a few bugs found by static-checker in the new driver
- stmmac: fix frame preemption handshake not triggering after
interface restart
Previous releases - regressions:
- make nla_strcmp handle more then one trailing null character
- fix stack OOB reads while fragmenting IPv4 packets in openvswitch
and net/sched
- sctp: do asoc update earlier in sctp_sf_do_dupcook_a
- sctp: delay auto_asconf init until binding the first addr
- stmmac: clear receive all(RA) bit when promiscuous mode is off
- can: mcp251x: fix resume from sleep before interface was brought up
Previous releases - always broken:
- bpf: fix leakage of uninitialized bpf stack under speculation
- bpf: fix masking negation logic upon negative dst register
- netfilter: don't assume that skb_header_pointer() will never fail
- only allow init netns to set default tcp cong to a restricted algo
- xsk: fix xp_aligned_validate_desc() when len == chunk_size to avoid
false positive errors
- ethtool: fix missing NLM_F_MULTI flag when dumping
- can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
- sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b
- bridge: fix NULL-deref caused by a races between assigning
rx_handler_data and setting the IFF_BRIDGE_PORT bit
Latecomer:
- seg6: add counters support for SRv6 Behaviors"
* tag 'net-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
atm: firestream: Use fallthrough pseudo-keyword
net: stmmac: Do not enable RX FIFO overflow interrupts
mptcp: fix splat when closing unaccepted socket
i40e: Remove LLDP frame filters
i40e: Fix PHY type identifiers for 2.5G and 5G adapters
i40e: fix the restart auto-negotiation after FEC modified
i40e: Fix use-after-free in i40e_client_subtask()
i40e: fix broken XDP support
netfilter: nftables: avoid potential overflows on 32bit arches
netfilter: nftables: avoid overflows in nft_hash_buckets()
tcp: Specify cmsgbuf is user pointer for receive zerocopy.
mlxsw: spectrum_mr: Update egress RIF list before route's action
net: ipa: fix inter-EE IRQ register definitions
can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
can: mcp251x: fix resume from sleep before interface was brought up
can: mcp251xfd: mcp251xfd_probe(): add missing can_rx_offload_del() in error path
can: mcp251xfd: mcp251xfd_probe(): fix an error pointer dereference in probe
netfilter: nftables: Fix a memleak from userdata error path in new objects
netfilter: remove BUG_ON() after skb_header_pointer()
netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check
...
<linux/kconfig.h> is included from all the kernel-space source files,
including C, assembly, linker scripts. It is intended to contain a
minimal set of macros to evaluate CONFIG options.
IF_ENABLED() is an intruder here because (x ? y : z) is C code, which
should not be included from assembly files or linker scripts.
Also, <linux/kconfig.h> is no longer self-contained because NULL is
defined in <linux/stddef.h>.
Move IF_ENABLED() out to <linux/kernel.h> as PTR_IF(). PTF_IF()
takes the general boolean expression instead of a CONFIG option
so that it fits better in <linux/kernel.h>.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Merge master back into next, this allows us to resolve some conflicts in
arch/powerpc/Kconfig, and also re-sort the symbols under config PPC so
that they are in alphabetical order again.
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Add SECMARK revision 1 to fix incorrect layout that prevents
from remove rule with this target, from Phil Sutter.
2) Fix pernet exit path spat in arptables, from Florian Westphal.
3) Missing rcu_read_unlock() for unknown nfnetlink callbacks,
reported by syzbot, from Eric Dumazet.
4) Missing check for skb_header_pointer() NULL pointer in
nfnetlink_osf.
5) Remove BUG_ON() after skb_header_pointer() from packet path
in several conntrack helper and the TCP tracker.
6) Fix memleak in the new object error path of userdata.
7) Avoid overflows in nft_hash_buckets(), reported by syzbot,
also from Eric.
8) Avoid overflows in 32bit arches, from Eric.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: nftables: avoid potential overflows on 32bit arches
netfilter: nftables: avoid overflows in nft_hash_buckets()
netfilter: nftables: Fix a memleak from userdata error path in new objects
netfilter: remove BUG_ON() after skb_header_pointer()
netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check
netfilter: nfnetlink: add a missing rcu_read_unlock()
netfilter: arptables: use pernet ops struct during unregister
netfilter: xt_SECMARK: add new revision to fix structure layout
====================
Link: https://lore.kernel.org/r/20210507174739.1850-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nguyen, Anthony L says:
====================
Intel Wired LAN Driver Updates 2021-05-07
This series contains updates to i40e driver only.
Magnus fixes XDP by adding and correcting checks that were caused by a
previous commit which introduced a new variable but did not account for
it in all paths.
Yunjian Wang adds a return in an error path to prevent reading a freed
pointer.
Jaroslaw forces link reset when changing FEC so that changes take
affect.
Mateusz fixes PHY types for 2.5G and 5G as there is a differentiation on
PHY identifiers based on operation.
Arkadiusz removes filtering of LLDP frames for software DCB as this is
preventing them from being properly transmitted.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: Remove LLDP frame filters
i40e: Fix PHY type identifiers for 2.5G and 5G adapters
i40e: fix the restart auto-negotiation after FEC modified
i40e: Fix use-after-free in i40e_client_subtask()
i40e: fix broken XDP support
====================
Link: https://lore.kernel.org/r/20210507164151.2878147-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RX FIFO overflows when the system is not able to process all received
packets and they start accumulating (first in the DMA queue in memory,
then in the FIFO). An interrupt is then raised for each overflowing packet
and handled in stmmac_interrupt(). This is counter-productive, since it
brings the system (or more likely, one CPU core) to its knees to process
the FIFO overflow interrupts.
stmmac_interrupt() handles overflow interrupts by writing the rx tail ptr
into the corresponding hardware register (according to the MAC spec, this
has the effect of restarting the MAC DMA). However, without freeing any rx
descriptors, the DMA stops right away, and another overflow interrupt is
raised as the FIFO overflows again. Since the DMA is already restarted at
the end of stmmac_rx_refill() after freeing descriptors, disabling FIFO
overflow interrupts and the corresponding handling code has no side effect,
and eliminates the interrupt storm when the RX FIFO overflows.
Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com>
Link: https://lore.kernel.org/r/20210506143312.20784-1-yannick.vignon@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
