commit 3360d41f4ac490282fddc3ccc0b58679aa5c065d upstream.
On a few platforms such as TI's AM69 device, disable_irq() fails to keep
track of the interrupts that happen between disable_irq() and
enable_irq() and those interrupts are missed. Use the ->irq_unmask() and
->irq_mask() methods instead of ->irq_enable() and ->irq_disable() to
correctly keep track of edges when disable_irq is called.
This solves the issue of disable_irq() not working as expected on such
platforms.
Fixes: 23265442b0 ("ARM: davinci: irq_data conversion.")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Parth Pancholi <parth.pancholi@toradex.com>
Acked-by: Keerthy <j-keerthy@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240828133207.493961-1-parth105105@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fa630df665aa9ddce3a96ce7b54e10a38e4d2a2b upstream.
During an incremental send we may end up sending an invalid clone
operation, for the last extent of a file which ends at an unaligned offset
that matches the final i_size of the file in the send snapshot, in case
the file had its initial size (the size in the parent snapshot) decreased
in the send snapshot. In this case the destination will fail to apply the
clone operation because its end offset is not sector size aligned and it
ends before the current size of the file.
Sending the truncate operation always happens when we finish processing an
inode, after we process all its extents (and xattrs, names, etc). So fix
this by ensuring the file has a valid size before we send a clone
operation for an unaligned extent that ends at the final i_size of the
file. The size we truncate to matches the start offset of the clone range
but it could be any value between that start offset and the final size of
the file since the clone operation will expand the i_size if the current
size is smaller than the end offset. The start offset of the range was
chosen because it's always sector size aligned and avoids a truncation
into the middle of a page, which results in dirtying the page due to
filling part of it with zeroes and then making the clone operation at the
receiver trigger IO.
The following test reproduces the issue:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f $DEV
mount $DEV $MNT
# Create a file with a size of 256K + 5 bytes, having two extents, one
# with a size of 128K and another one with a size of 128K + 5 bytes.
last_ext_size=$((128 * 1024 + 5))
xfs_io -f -d -c "pwrite -S 0xab -b 128K 0 128K" \
-c "pwrite -S 0xcd -b $last_ext_size 128K $last_ext_size" \
$MNT/foo
# Another file which we will later clone foo into, but initially with
# a larger size than foo.
xfs_io -f -c "pwrite -S 0xef 0 1M" $MNT/bar
btrfs subvolume snapshot -r $MNT/ $MNT/snap1
# Now resize bar and clone foo into it.
xfs_io -c "truncate 0" \
-c "reflink $MNT/foo" $MNT/bar
btrfs subvolume snapshot -r $MNT/ $MNT/snap2
rm -f /tmp/send-full /tmp/send-inc
btrfs send -f /tmp/send-full $MNT/snap1
btrfs send -p $MNT/snap1 -f /tmp/send-inc $MNT/snap2
umount $MNT
mkfs.btrfs -f $DEV
mount $DEV $MNT
btrfs receive -f /tmp/send-full $MNT
btrfs receive -f /tmp/send-inc $MNT
umount $MNT
Running it before this patch:
$ ./test.sh
(...)
At subvol snap1
At snapshot snap2
ERROR: failed to clone extents to bar: Invalid argument
A test case for fstests will be sent soon.
Reported-by: Ben Millwood <thebenmachine@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAJhrHS2z+WViO2h=ojYvBPDLsATwLbg+7JaNCyYomv0fUxEpQQ@mail.gmail.com/
Fixes: 46a6e10a1ab1 ("btrfs: send: allow cloning non-aligned extent if it ends at i_size")
CC: stable@vger.kernel.org # 6.11
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c3b47f49e83197e8dffd023ec568403bcdbb774b upstream.
[BUG]
Syzbot reported a NULL pointer dereference with the following crash:
FAULT_INJECTION: forcing a failure.
start_transaction+0x830/0x1670 fs/btrfs/transaction.c:676
prepare_to_relocate+0x31f/0x4c0 fs/btrfs/relocation.c:3642
relocate_block_group+0x169/0xd20 fs/btrfs/relocation.c:3678
...
BTRFS info (device loop0): balance: ended with status: -12
Oops: general protection fault, probably for non-canonical address 0xdffffc00000000cc: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000660-0x0000000000000667]
RIP: 0010:btrfs_update_reloc_root+0x362/0xa80 fs/btrfs/relocation.c:926
Call Trace:
<TASK>
commit_fs_roots+0x2ee/0x720 fs/btrfs/transaction.c:1496
btrfs_commit_transaction+0xfaf/0x3740 fs/btrfs/transaction.c:2430
del_balance_item fs/btrfs/volumes.c:3678 [inline]
reset_balance_state+0x25e/0x3c0 fs/btrfs/volumes.c:3742
btrfs_balance+0xead/0x10c0 fs/btrfs/volumes.c:4574
btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3673
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[CAUSE]
The allocation failure happens at the start_transaction() inside
prepare_to_relocate(), and during the error handling we call
unset_reloc_control(), which makes fs_info->balance_ctl to be NULL.
Then we continue the error path cleanup in btrfs_balance() by calling
reset_balance_state() which will call del_balance_item() to fully delete
the balance item in the root tree.
However during the small window between set_reloc_contrl() and
unset_reloc_control(), we can have a subvolume tree update and created a
reloc_root for that subvolume.
Then we go into the final btrfs_commit_transaction() of
del_balance_item(), and into btrfs_update_reloc_root() inside
commit_fs_roots().
That function checks if fs_info->reloc_ctl is in the merge_reloc_tree
stage, but since fs_info->reloc_ctl is NULL, it results a NULL pointer
dereference.
[FIX]
Just add extra check on fs_info->reloc_ctl inside
btrfs_update_reloc_root(), before checking
fs_info->reloc_ctl->merge_reloc_tree.
That DEAD_RELOC_TREE handling is to prevent further modification to the
reloc tree during merge stage, but since there is no reloc_ctl at all,
we do not need to bother that.
Reported-by: syzbot+283673dbc38527ef9f3d@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/66f6bfa7.050a0220.38ace9.0019.GAE@google.com/
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da6ef2dffe6056aad3435e6cf7c6471c2a62187c upstream.
A dentry leak may be caused when a lookup cookie and a cull are concurrent:
P1 | P2
-----------------------------------------------------------
cachefiles_lookup_cookie
cachefiles_look_up_object
lookup_one_positive_unlocked
// get dentry
cachefiles_cull
inode->i_flags |= S_KERNEL_FILE;
cachefiles_open_file
cachefiles_mark_inode_in_use
__cachefiles_mark_inode_in_use
can_use = false
if (!(inode->i_flags & S_KERNEL_FILE))
can_use = true
return false
return false
// Returns an error but doesn't put dentry
After that the following WARNING will be triggered when the backend folder
is umounted:
==================================================================
BUG: Dentry 000000008ad87947{i=7a,n=Dx_1_1.img} still in use (1) [unmount of ext4 sda]
WARNING: CPU: 4 PID: 359261 at fs/dcache.c:1767 umount_check+0x5d/0x70
CPU: 4 PID: 359261 Comm: umount Not tainted 6.6.0-dirty #25
RIP: 0010:umount_check+0x5d/0x70
Call Trace:
<TASK>
d_walk+0xda/0x2b0
do_one_tree+0x20/0x40
shrink_dcache_for_umount+0x2c/0x90
generic_shutdown_super+0x20/0x160
kill_block_super+0x1a/0x40
ext4_kill_sb+0x22/0x40
deactivate_locked_super+0x35/0x80
cleanup_mnt+0x104/0x160
==================================================================
Whether cachefiles_open_file() returns true or false, the reference count
obtained by lookup_positive_unlocked() in cachefiles_look_up_object()
should be released.
Therefore release that reference count in cachefiles_look_up_object() to
fix the above issue and simplify the code.
Fixes: 1f08c925e7 ("cachefiles: Implement backing file wrangling")
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240829083409.3788142-1-libaokun@huaweicloud.com
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb5cc65f973661241e4a2b7390b429aa7b330c69 upstream.
We register a devm action to call adp5589_clear_config() and then pass
the i2c client as argument so that we can call i2c_get_clientdata() in
order to get our device object. However, i2c_set_clientdata() is only
being set at the end of the probe function which means that we'll get a
NULL pointer dereference in case the probe function fails early.
Fixes: 30df385e35 ("Input: adp5589-keys - use devm_add_action_or_reset() for register clear")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20241001-b4-dev-adp5589-fw-conversion-v1-1-fca0149dfc47@analog.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 675faf5a14c14a2be0b870db30a70764df81e2df upstream.
The commit b8c43360f6e4 ("net: stmmac: No need to calculate speed divider
when offload is disabled") allows the "port_transmit_rate_kbps" to be
set to a value of 0, which is then passed to the "div_s64" function when
tc-cbs is disabled. This leads to a zero-division error.
When tc-cbs is disabled, the idleslope, sendslope, and credit values the
credit values are not required to be configured. Therefore, adding a return
statement after setting the txQ mode to DCB when tc-cbs is disabled would
prevent a zero-division error.
Fixes: b8c43360f6e4 ("net: stmmac: No need to calculate speed divider when offload is disabled")
Cc: <stable@vger.kernel.org>
Co-developed-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: KhaiWenTan <khai.wen.tan@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240918061422.1589662-1-khai.wen.tan@linux.intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ada1986d07976d60bed5017aa38b7f7cf27883f7 upstream.
Alfred Agrell found that TOMOYO cannot handle execveat(AT_EMPTY_PATH)
inside chroot environment where /dev and /proc are not mounted, for
commit 51f39a1f0c ("syscalls: implement execveat() system call") missed
that TOMOYO tries to canonicalize argv[0] when the filename fed to the
executed program as argv[0] is supplied using potentially nonexistent
pathname.
Since "/dev/fd/<fd>" already lost symlink information used for obtaining
that <fd>, it is too late to reconstruct symlink's pathname. Although
<filename> part of "/dev/fd/<fd>/<filename>" might not be canonicalized,
TOMOYO cannot use tomoyo_realpath_nofollow() when /dev or /proc is not
mounted. Therefore, fallback to tomoyo_realpath_from_path() when
tomoyo_realpath_nofollow() failed.
Reported-by: Alfred Agrell <blubban@gmail.com>
Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1082001
Fixes: 51f39a1f0c ("syscalls: implement execveat() system call")
Cc: stable@vger.kernel.org # v3.19+
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a1e40ac5b5e9077fe1f7ae0eb88034db0f9ae1ab upstream.
Detect gso fraglist skbs with corrupted geometry (see below) and
pass these to skb_segment instead of skb_segment_list, as the first
can segment them correctly.
Valid SKB_GSO_FRAGLIST skbs
- consist of two or more segments
- the head_skb holds the protocol headers plus first gso_size
- one or more frag_list skbs hold exactly one segment
- all but the last must be gso_size
Optional datapath hooks such as NAT and BPF (bpf_skb_pull_data) can
modify these skbs, breaking these invariants.
In extreme cases they pull all data into skb linear. For UDP, this
causes a NULL ptr deref in __udpv4_gso_segment_list_csum at
udp_hdr(seg->next)->dest.
Detect invalid geometry due to pull, by checking head_skb size.
Don't just drop, as this may blackhole a destination. Convert to be
able to pass to regular skb_segment.
Link: https://lore.kernel.org/netdev/20240428142913.18666-1-shiming.cheng@mediatek.com/
Fixes: 9fd1ff5d2a ("udp: Support UDP fraglist GRO/GSO.")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20241001171752.107580-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a421e3fe0e6abe27395078f4f0cec5daf466caea upstream.
Due to server permission control, the client does not have access to
the shared root directory, but can access subdirectories normally, so
users usually mount the shared subdirectories directly. In this case,
queryfs should use the actual path instead of the root directory to
avoid the call returning an error (EACCES).
Signed-off-by: wangrong <wangrong@uniontech.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fff617979f97c773aaa9432c31cf62444b3bdbd4 upstream.
In LUCID EVO PLL CAL_L_VAL and L_VAL bitfields are part of single
PLL_L_VAL register. Update for L_VAL bitfield values in PLL_L_VAL
register using regmap_write() API in __alpha_pll_trion_set_rate
callback will override LUCID EVO PLL initial configuration related
to PLL_CAL_L_VAL bit fields in PLL_L_VAL register.
Observed random PLL lock failures during PLL enable due to such
override in PLL calibration value. Use regmap_update_bits() with
L_VAL bitfield mask instead of regmap_write() API to update only
PLL_L_VAL bitfields in __alpha_pll_trion_set_rate callback.
Fixes: 260e36606a ("clk: qcom: clk-alpha-pll: add Lucid EVO PLL configuration interfaces")
Cc: stable@vger.kernel.org
Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20240611133752.2192401-2-quic_ajipan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a151766bd3688f6803e706c6433a7c8d3c6a6a94 upstream.
pm_runtime_enable() should happen prior to vfe_get() since vfe_get() calls
pm_runtime_resume_and_get().
This is a basic race condition that doesn't show up for most users so is
not widely reported. If you blacklist qcom-camss in modules.d and then
subsequently modprobe the module post-boot it is possible to reliably show
this error up.
The kernel log for this error looks like this:
qcom-camss ac5a000.camss: Failed to power up pipeline: -13
Fixes: 02afa816db ("media: camss: Add basic runtime PM support")
Reported-by: Johan Hovold <johan+linaro@kernel.org>
Closes: https://lore.kernel.org/lkml/ZoVNHOTI0PKMNt4_@hovoldconsulting.com/
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ade508b545c969c72cd68479f275a5dd640fd8b9 upstream.
With PWRSTS_OFF_ON, PCIe GDSCs are turned off during gdsc_disable(). This
can happen during scenarios such as system suspend and breaks the resume
of PCIe controllers from suspend.
So use PWRSTS_RET_ON to indicate the GDSC driver to not turn off the GDSCs
during gdsc_disable() and allow the hardware to transition the GDSCs to
retention when the parent domain enters low power state during system
suspend.
Cc: stable@vger.kernel.org # 5.7
Fixes: 3e5770921a ("clk: qcom: gcc: Add global clock controller driver for SM8250")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240719134238.312191-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c5a85ed88e043474161bbfe54002c89c1cb50ee2 upstream.
in venus_probe, core->work is bound with venus_sys_error_handler, which is
used to handle error. The code use core->sys_err_done to make sync work.
The core->work is started in venus_event_notify.
If we call venus_remove, there might be an unfished work. The possible
sequence is as follows:
CPU0 CPU1
|venus_sys_error_handler
venus_remove |
hfi_destroy |
venus_hfi_destroy |
kfree(hdev); |
|hfi_reinit
|venus_hfi_queues_reinit
|//use hdev
Fix it by canceling the work in venus_remove.
Cc: stable@vger.kernel.org
Fixes: af2c3834c8 ("[media] media: venus: adding core part and helper functions")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 599f6899051cb70c4e0aa9fd591b9ee220cb6f14 upstream.
The cec_msg_set_reply_to() helper function never zeroed the
struct cec_msg flags field, this can cause unexpected behavior
if flags was uninitialized to begin with.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 0dbacebede ("[media] cec: move the CEC framework out of staging and to media")
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 889e1332310656961855c0dcedbb4dbe78e39d22 upstream.
With PWRSTS_OFF_ON, PCIe GDSCs are turned off during gdsc_disable(). This
can happen during scenarios such as system suspend and breaks the resume
of PCIe controllers from suspend.
So use PWRSTS_RET_ON to indicate the GDSC driver to not turn off the GDSCs
during gdsc_disable() and allow the hardware to transition the GDSCs to
retention when the parent domain enters low power state during system
suspend.
Cc: stable@vger.kernel.org # 5.17
Fixes: db0c944ee9 ("clk: qcom: Add clock driver for SM8450")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240722105733.13040-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9ab27eb5866ccbf57715cfdba4b03d57776092fb upstream.
By simply bailing out, the driver was violating its rule and internal
assumptions that either both or no rproc should be initialized. E.g.,
this could cause the first core to be available but not the second one,
leading to crashes on its shutdown later on while trying to dereference
that second instance.
Fixes: 61f6f68447ab ("remoteproc: k3-r5: Wait for core0 power-up before powering up core1")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Beleswar Padhi <b-padhi@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/9f481156-f220-4adf-b3d9-670871351e26@siemens.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6d6e54fc71ad1ab0a87047fd9c211e75d86084a3 upstream.
For fixing CVE-2023-6270, f98364e92662 ("aoe: fix the potential
use-after-free problem in aoecmd_cfg_pkts") makes tx() calling dev_put()
instead of doing in aoecmd_cfg_pkts(). It avoids that the tx() runs
into use-after-free.
Then Nicolai Stange found more places in aoe have potential use-after-free
problem with tx(). e.g. revalidate(), aoecmd_ata_rw(), resend(), probe()
and aoecmd_cfg_rsp(). Those functions also use aoenet_xmit() to push
packet to tx queue. So they should also use dev_hold() to increase the
refcnt of skb->dev.
On the other hand, moving dev_put() to tx() causes that the refcnt of
skb->dev be reduced to a negative value, because corresponding
dev_hold() are not called in revalidate(), aoecmd_ata_rw(), resend(),
probe(), and aoecmd_cfg_rsp(). This patch fixed this issue.
Cc: stable@vger.kernel.org
Link: https://nvd.nist.gov/vuln/detail/CVE-2023-6270
Fixes: f98364e92662 ("aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts")
Reported-by: Nicolai Stange <nstange@suse.com>
Signed-off-by: Chun-Yi Lee <jlee@suse.com>
Link: https://lore.kernel.org/stable/20240624064418.27043-1-jlee%40suse.com
Link: https://lore.kernel.org/r/20241002035458.24401-1-jlee@suse.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 202f39039a11402dcbcd5fece8d9fa6be83f49ae upstream.
According to RFC 8881, all minor versions of NFSv4 support PUTPUBFH.
Replace the XDR decoder for PUTPUBFH with a "noop" since we no
longer want the minorversion check, and PUTPUBFH has no arguments to
decode. (Ideally nfsd4_decode_noop should really be called
nfsd4_decode_void).
PUTPUBFH should now behave just like PUTROOTFH.
Reported-by: Cedric Blancher <cedric.blancher@gmail.com>
Fixes: e1a90ebd8b ("NFSD: Combine decode operations for v4 and v4.1")
Cc: Dan Shelton <dan.f.shelton@gmail.com>
Cc: Roland Mainz <roland.mainz@nrubsig.org>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45bb63ed20e02ae146336412889fe5450316a84f upstream.
The pair of bloom filtered used by delegation_blocked() was intended to
block delegations on given filehandles for between 30 and 60 seconds. A
new filehandle would be recorded in the "new" bit set. That would then
be switch to the "old" bit set between 0 and 30 seconds later, and it
would remain as the "old" bit set for 30 seconds.
Unfortunately the code intended to clear the old bit set once it reached
30 seconds old, preparing it to be the next new bit set, instead cleared
the *new* bit set before switching it to be the old bit set. This means
that the "old" bit set is always empty and delegations are blocked
between 0 and 30 seconds.
This patch updates bd->new before clearing the set with that index,
instead of afterwards.
Reported-by: Olga Kornievskaia <okorniev@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 6282cd5655 ("NFSD: Don't hand out delegations for 30 seconds after recalling them.")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ac01c8c4246546fd8340a232f3ada1921dc0ee48 upstream.
AddressSanitizer found a use-after-free bug in the symbol code which
manifested as 'perf top' segfaulting.
==1238389==ERROR: AddressSanitizer: heap-use-after-free on address 0x60b00c48844b at pc 0x5650d8035961 bp 0x7f751aaecc90 sp 0x7f751aaecc80
READ of size 1 at 0x60b00c48844b thread T193
#0 0x5650d8035960 in _sort__sym_cmp util/sort.c:310
#1 0x5650d8043744 in hist_entry__cmp util/hist.c:1286
#2 0x5650d8043951 in hists__findnew_entry util/hist.c:614
#3 0x5650d804568f in __hists__add_entry util/hist.c:754
#4 0x5650d8045bf9 in hists__add_entry util/hist.c:772
#5 0x5650d8045df1 in iter_add_single_normal_entry util/hist.c:997
#6 0x5650d8043326 in hist_entry_iter__add util/hist.c:1242
#7 0x5650d7ceeefe in perf_event__process_sample /home/matt/src/linux/tools/perf/builtin-top.c:845
#8 0x5650d7ceeefe in deliver_event /home/matt/src/linux/tools/perf/builtin-top.c:1208
#9 0x5650d7fdb51b in do_flush util/ordered-events.c:245
#10 0x5650d7fdb51b in __ordered_events__flush util/ordered-events.c:324
#11 0x5650d7ced743 in process_thread /home/matt/src/linux/tools/perf/builtin-top.c:1120
#12 0x7f757ef1f133 in start_thread nptl/pthread_create.c:442
#13 0x7f757ef9f7db in clone3 ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81
When updating hist maps it's also necessary to update the hist symbol
reference because the old one gets freed in map__put().
While this bug was probably introduced with 5c24b67aae ("perf
tools: Replace map->referenced & maps->removed_maps with map->refcnt"),
the symbol objects were leaked until c087e9480c ("perf machine:
Fix refcount usage when processing PERF_RECORD_KSYMBOL") was merged so
the bug was masked.
Fixes: c087e9480c ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL")
Reported-by: Yunzhao Li <yunzhao@cloudflare.com>
Signed-off-by: Matt Fleming (Cloudflare) <matt@readmodwrite.com>
Cc: Ian Rogers <irogers@google.com>
Cc: kernel-team@cloudflare.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: stable@vger.kernel.org # v5.13+
Link: https://lore.kernel.org/r/20240815142212.3834625-1-matt@readmodwrite.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d2b537b3e533f28e0d97293fe9293161fe8cd137 upstream.
If the first directory entry in the root directory is not a bitmap
directory entry, 'bh' will not be released and reassigned, which
will cause a memory leak.
Fixes: 1e49a94cf7 ("exfat: add bitmap operations")
Cc: stable@vger.kernel.org
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ca60b86f57a4d9648f68418a725b3a7de2816b0 upstream.
One of our customers reported a crash and a corrupted ocfs2 filesystem.
The crash was due to the detection of corruption. Upon troubleshooting,
the fsck -fn output showed the below corruption
[EXTENT_LIST_FREE] Extent list in owner 33080590 claims 230 as the next free chain record,
but fsck believes the largest valid value is 227. Clamp the next record value? n
The stat output from the debugfs.ocfs2 showed the following corruption
where the "Next Free Rec:" had overshot the "Count:" in the root metadata
block.
Inode: 33080590 Mode: 0640 Generation: 2619713622 (0x9c25a856)
FS Generation: 904309833 (0x35e6ac49)
CRC32: 00000000 ECC: 0000
Type: Regular Attr: 0x0 Flags: Valid
Dynamic Features: (0x16) HasXattr InlineXattr Refcounted
Extended Attributes Block: 0 Extended Attributes Inline Size: 256
User: 0 (root) Group: 0 (root) Size: 281320357888
Links: 1 Clusters: 141738
ctime: 0x66911b56 0x316edcb8 -- Fri Jul 12 06:02:30.829349048 2024
atime: 0x66911d6b 0x7f7a28d -- Fri Jul 12 06:11:23.133669517 2024
mtime: 0x66911b56 0x12ed75d7 -- Fri Jul 12 06:02:30.317552087 2024
dtime: 0x0 -- Wed Dec 31 17:00:00 1969
Refcount Block: 2777346
Last Extblk: 2886943 Orphan Slot: 0
Sub Alloc Slot: 0 Sub Alloc Bit: 14
Tree Depth: 1 Count: 227 Next Free Rec: 230
## Offset Clusters Block#
0 0 2310 2776351
1 2310 2139 2777375
2 4449 1221 2778399
3 5670 731 2779423
4 6401 566 2780447
....... .... .......
....... .... .......
The issue was in the reflink workfow while reserving space for inline
xattr. The problematic function is ocfs2_reflink_xattr_inline(). By the
time this function is called the reflink tree is already recreated at the
destination inode from the source inode. At this point, this function
reserves space for inline xattrs at the destination inode without even
checking if there is space at the root metadata block. It simply reduces
the l_count from 243 to 227 thereby making space of 256 bytes for inline
xattr whereas the inode already has extents beyond this index (in this
case up to 230), thereby causing corruption.
The fix for this is to reserve space for inline metadata at the destination
inode before the reflink tree gets recreated. The customer has verified the
fix.
Link: https://lkml.kernel.org/r/20240918063844.1830332-1-gautham.ananthakrishna@oracle.com
Fixes: ef962df057 ("ocfs2: xattr: fix inlined xattr reflink")
Signed-off-by: Gautham Ananthakrishna <gautham.ananthakrishna@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2af148ef8549a12f8025286b8825c2833ee6bcb8 upstream.
syzbot reported an uninit-value BUG:
BUG: KMSAN: uninit-value in ocfs2_get_block+0xed2/0x2710 fs/ocfs2/aops.c:159
ocfs2_get_block+0xed2/0x2710 fs/ocfs2/aops.c:159
do_mpage_readpage+0xc45/0x2780 fs/mpage.c:225
mpage_readahead+0x43f/0x840 fs/mpage.c:374
ocfs2_readahead+0x269/0x320 fs/ocfs2/aops.c:381
read_pages+0x193/0x1110 mm/readahead.c:160
page_cache_ra_unbounded+0x901/0x9f0 mm/readahead.c:273
do_page_cache_ra mm/readahead.c:303 [inline]
force_page_cache_ra+0x3b1/0x4b0 mm/readahead.c:332
force_page_cache_readahead mm/internal.h:347 [inline]
generic_fadvise+0x6b0/0xa90 mm/fadvise.c:106
vfs_fadvise mm/fadvise.c:185 [inline]
ksys_fadvise64_64 mm/fadvise.c:199 [inline]
__do_sys_fadvise64 mm/fadvise.c:214 [inline]
__se_sys_fadvise64 mm/fadvise.c:212 [inline]
__x64_sys_fadvise64+0x1fb/0x3a0 mm/fadvise.c:212
x64_sys_call+0xe11/0x3ba0
arch/x86/include/generated/asm/syscalls_64.h:222
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
This is because when ocfs2_extent_map_get_blocks() fails, p_blkno is
uninitialized. So the error log will trigger the above uninit-value
access.
The error log is out-of-date since get_blocks() was removed long time ago.
And the error code will be logged in ocfs2_extent_map_get_blocks() once
ocfs2_get_cluster() fails, so fix this by only logging inode and block.
Link: https://syzkaller.appspot.com/bug?extid=9709e73bae885b05314b
Link: https://lkml.kernel.org/r/20240925090600.3643376-1-joseph.qi@linux.alibaba.com
Fixes: ccd979bdbc ("[PATCH] OCFS2: The Second Oracle Cluster Filesystem")
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reported-by: syzbot+9709e73bae885b05314b@syzkaller.appspotmail.com
Tested-by: syzbot+9709e73bae885b05314b@syzkaller.appspotmail.com
Cc: Heming Zhao <heming.zhao@suse.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a83a716ec233990e1fd5b6fbb1200ade63bf450 upstream.
As long as krealloc() is called with __GFP_ZERO consistently, starting
with the initial memory allocation, __GFP_ZERO should be fully honored.
However, if for an existing allocation krealloc() is called with a
decreased size, it is not ensured that the spare portion the allocation is
zeroed. Thus, if krealloc() is subsequently called with a larger size
again, __GFP_ZERO can't be fully honored, since we don't know the previous
size, but only the bucket size.
Example:
buf = kzalloc(64, GFP_KERNEL);
memset(buf, 0xff, 64);
buf = krealloc(buf, 48, GFP_KERNEL | __GFP_ZERO);
/* After this call the last 16 bytes are still 0xff. */
buf = krealloc(buf, 64, GFP_KERNEL | __GFP_ZERO);
Fix this, by explicitly setting spare memory to zero, when shrinking an
allocation with __GFP_ZERO flag set or init_on_alloc enabled.
Link: https://lkml.kernel.org/r/20240812223707.32049-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5cacdc6f2bb2a9bf214469dd7112b43dd2dd68a upstream.
In __jbd2_log_wait_for_space(), we might call jbd2_cleanup_journal_tail()
to recover some journal space. But if an error occurs while executing
jbd2_cleanup_journal_tail() (e.g., an EIO), we don't stop waiting for free
space right away, we try other branches, and if j_committing_transaction
is NULL (i.e., the tid is 0), we will get the following complain:
============================================
JBD2: I/O error when updating journal superblock for sdd-8.
__jbd2_log_wait_for_space: needed 256 blocks and only had 217 space available
__jbd2_log_wait_for_space: no way to get more journal space in sdd-8
------------[ cut here ]------------
WARNING: CPU: 2 PID: 139804 at fs/jbd2/checkpoint.c:109 __jbd2_log_wait_for_space+0x251/0x2e0
Modules linked in:
CPU: 2 PID: 139804 Comm: kworker/u8:3 Not tainted 6.6.0+ #1
RIP: 0010:__jbd2_log_wait_for_space+0x251/0x2e0
Call Trace:
<TASK>
add_transaction_credits+0x5d1/0x5e0
start_this_handle+0x1ef/0x6a0
jbd2__journal_start+0x18b/0x340
ext4_dirty_inode+0x5d/0xb0
__mark_inode_dirty+0xe4/0x5d0
generic_update_time+0x60/0x70
[...]
============================================
So only if jbd2_cleanup_journal_tail() returns 1, i.e., there is nothing to
clean up at the moment, continue to try to reclaim free space in other ways.
Note that this fix relies on commit 6f6a6fda29 ("jbd2: fix ocfs2 corrupt
when updating journal superblock fails") to make jbd2_cleanup_journal_tail
return the correct error code.
Fixes: 8c3f25d895 ("jbd2: don't give up looking for space so easily in __jbd2_log_wait_for_space")
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240718115336.2554501-1-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b4afe4183ec77f230851ea139d91e5cf2644c68b upstream.
On a system with CXL memory, the resource tree (/proc/iomem) related to
CXL memory may look like something as follows.
490000000-50fffffff : CXL Window 0
490000000-50fffffff : region0
490000000-50fffffff : dax0.0
490000000-50fffffff : System RAM (kmem)
Because drivers/dax/kmem.c calls add_memory_driver_managed() during
onlining CXL memory, which makes "System RAM (kmem)" a descendant of "CXL
Window X". This confuses region_intersects(), which expects all "System
RAM" resources to be at the top level of iomem_resource. This can lead to
bugs.
For example, when the following command line is executed to write some
memory in CXL memory range via /dev/mem,
$ dd if=data of=/dev/mem bs=$((1 << 10)) seek=$((0x490000000 >> 10)) count=1
dd: error writing '/dev/mem': Bad address
1+0 records in
0+0 records out
0 bytes copied, 0.0283507 s, 0.0 kB/s
the command fails as expected. However, the error code is wrong. It
should be "Operation not permitted" instead of "Bad address". More
seriously, the /dev/mem permission checking in devmem_is_allowed() passes
incorrectly. Although the accessing is prevented later because ioremap()
isn't allowed to map system RAM, it is a potential security issue. During
command executing, the following warning is reported in the kernel log for
calling ioremap() on system RAM.
ioremap on RAM at 0x0000000490000000 - 0x0000000490000fff
WARNING: CPU: 2 PID: 416 at arch/x86/mm/ioremap.c:216 __ioremap_caller.constprop.0+0x131/0x35d
Call Trace:
memremap+0xcb/0x184
xlate_dev_mem_ptr+0x25/0x2f
write_mem+0x94/0xfb
vfs_write+0x128/0x26d
ksys_write+0xac/0xfe
do_syscall_64+0x9a/0xfd
entry_SYSCALL_64_after_hwframe+0x4b/0x53
The details of command execution process are as follows. In the above
resource tree, "System RAM" is a descendant of "CXL Window 0" instead of a
top level resource. So, region_intersects() will report no System RAM
resources in the CXL memory region incorrectly, because it only checks the
top level resources. Consequently, devmem_is_allowed() will return 1
(allow access via /dev/mem) for CXL memory region incorrectly.
Fortunately, ioremap() doesn't allow to map System RAM and reject the
access.
So, region_intersects() needs to be fixed to work correctly with the
resource tree with "System RAM" not at top level as above. To fix it, if
we found a unmatched resource in the top level, we will continue to search
matched resources in its descendant resources. So, we will not miss any
matched resources in resource tree anymore.
In the new implementation, an example resource tree
|------------- "CXL Window 0" ------------|
|-- "System RAM" --|
will behave similar as the following fake resource tree for
region_intersects(, IORESOURCE_SYSTEM_RAM, ),
|-- "System RAM" --||-- "CXL Window 0a" --|
Where "CXL Window 0a" is part of the original "CXL Window 0" that
isn't covered by "System RAM".
Link: https://lkml.kernel.org/r/20240906030713.204292-2-ying.huang@intel.com
Fixes: c221c0b030 ("device-dax: "Hotplug" persistent memory for use like normal RAM")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit db8e81132cf051843c9a59b46fa5a071c45baeb3 upstream.
An 'msi-parent' property with a single entry and no accompanying
'#msi-cells' property is considered the legacy definition as opposed
to its definition after being expanded with commit 126b16e2ad
("Docs: dt: add generic MSI bindings"). However, the legacy
definition is completely compatible with the current definition and,
since of_phandle_iterator_next() tolerates missing and present-but-
zero *cells properties since commit e42ee61017 ("of: Let
of_for_each_phandle fallback to non-negative cell_count"), there's no
need anymore to special case the legacy definition in
of_msi_get_domain().
Indeed, special casing has turned out to be harmful, because, as of
commit 7c025238b4 ("dt-bindings: irqchip: Describe the IMX MU block
as a MSI controller"), MSI controller DT bindings have started
specifying '#msi-cells' as a required property (even when the value
must be zero) as an effort to make the bindings more explicit. But,
since the special casing of 'msi-parent' only uses the existence of
'#msi-cells' for its heuristic, and not whether or not it's also
nonzero, the legacy path is not taken. Furthermore, the path to
support the new, broader definition isn't taken either since that
path has been restricted to the platform-msi bus.
But, neither the definition of 'msi-parent' nor the definition of
'#msi-cells' is platform-msi-specific (the platform-msi bus was just
the first bus that needed '#msi-cells'), so remove both the special
casing and the restriction. The code removal also requires changing
to of_parse_phandle_with_optional_args() in order to ensure the
legacy (but compatible) use of 'msi-parent' remains supported. This
not only simplifies the code but also resolves an issue with PCI
devices finding their MSI controllers on riscv, as the riscv,imsics
binding requires '#msi-cells=<0>'.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240817074107.31153-2-ajones@ventanamicro.com
Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b44aa559d6c7f4ea591ef9d2352a7250138d62a upstream.
The RK3066 VOP sets a dma_stop bit when it's done scanning out a frame
and needs the driver to acknowledge that by clearing the bit.
Unless we clear it "between" frames, the RGB output only shows noise
instead of the picture. atomic_flush is the place for it that least
affects other code (doing it on vblank would require converting all
other usages of the reg_lock to spin_(un)lock_irq, which would affect
performance for everyone).
This seems to be a redundant synchronization mechanism that was removed
in later iterations of the VOP hardware block.
Fixes: f4a6de855e ("drm: rockchip: vop: add rk3066 vop definitions")
Cc: stable@vger.kernel.org
Signed-off-by: Val Packett <val@packett.cool>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624204054.5524-2-val@packett.cool
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
