[ Upstream commit 1e5c647c3f ]
Add READ_ONCE()/WRITE_ONCE() on accesses to sk->sk_rxhash.
This also prevents a (smart ?) compiler to remove the condition in:
if (sk->sk_rxhash != newval)
sk->sk_rxhash = newval;
We need the condition to avoid dirtying a shared cache line.
Fixes: fec5e652e5 ("rfs: Receive Flow Steering")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 82a01ab35b ]
We missed that tcp_gso_segment() was assuming skb->len was smaller than 65535 :
oldlen = (u16)~skb->len;
This part came with commit 0718bcc09b ("[NET]: Fix CHECKSUM_HW GSO problems.")
This leads to wrong TCP checksum.
Adapt the code to accept arbitrary packet length.
v2:
- use two csum_add() instead of csum_fold() (Alexander Duyck)
- Change delta type to __wsum to reduce casts (Alexander Duyck)
Fixes: 09f3d1a3a5 ("ipv6/gso: remove temporary HBH/jumbo header")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230605161647.3624428-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2f4c143d7 ]
A remote DoS vulnerability of RPL Source Routing is assigned CVE-2023-2156.
The Source Routing Header (SRH) has the following format:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Next Header | Hdr Ext Len | Routing Type | Segments Left |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| CmprI | CmprE | Pad | Reserved |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| |
. .
. Addresses[1..n] .
. .
| |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The originator of an SRH places the first hop's IPv6 address in the IPv6
header's IPv6 Destination Address and the second hop's IPv6 address as
the first address in Addresses[1..n].
The CmprI and CmprE fields indicate the number of prefix octets that are
shared with the IPv6 Destination Address. When CmprI or CmprE is not 0,
Addresses[1..n] are compressed as follows:
1..n-1 : (16 - CmprI) bytes
n : (16 - CmprE) bytes
Segments Left indicates the number of route segments remaining. When the
value is not zero, the SRH is forwarded to the next hop. Its address
is extracted from Addresses[n - Segment Left + 1] and swapped with IPv6
Destination Address.
When Segment Left is greater than or equal to 2, the size of SRH is not
changed because Addresses[1..n-1] are decompressed and recompressed with
CmprI.
OTOH, when Segment Left changes from 1 to 0, the new SRH could have a
different size because Addresses[1..n-1] are decompressed with CmprI and
recompressed with CmprE.
Let's say CmprI is 15 and CmprE is 0. When we receive SRH with Segment
Left >= 2, Addresses[1..n-1] have 1 byte for each, and Addresses[n] has
16 bytes. When Segment Left is 1, Addresses[1..n-1] is decompressed to
16 bytes and not recompressed. Finally, the new SRH will need more room
in the header, and the size is (16 - 1) * (n - 1) bytes.
Here the max value of n is 255 as Segment Left is u8, so in the worst case,
we have to allocate 3825 bytes in the skb headroom. However, now we only
allocate a small fixed buffer that is IPV6_RPL_SRH_WORST_SWAP_SIZE (16 + 7
bytes). If the decompressed size overflows the room, skb_push() hits BUG()
below [0].
Instead of allocating the fixed buffer for every packet, let's allocate
enough headroom only when we receive SRH with Segment Left 1.
[0]:
skbuff: skb_under_panic: text:ffffffff81c9f6e2 len:576 put:576 head:ffff8880070b5180 data:ffff8880070b4fb0 tail:0x70 end:0x140 dev:lo
kernel BUG at net/core/skbuff.c:200!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 154 Comm: python3 Not tainted 6.4.0-rc4-00190-gc308e9ec0047 #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:skb_panic (net/core/skbuff.c:200)
Code: 4f 70 50 8b 87 bc 00 00 00 50 8b 87 b8 00 00 00 50 ff b7 c8 00 00 00 4c 8b 8f c0 00 00 00 48 c7 c7 80 6e 77 82 e8 ad 8b 60 ff <0f> 0b 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffc90000003da0 EFLAGS: 00000246
RAX: 0000000000000085 RBX: ffff8880058a6600 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff88807dc1c540 RDI: ffff88807dc1c540
RBP: ffffc90000003e48 R08: ffffffff82b392c8 R09: 00000000ffffdfff
R10: ffffffff82a592e0 R11: ffffffff82b092e0 R12: ffff888005b1c800
R13: ffff8880070b51b8 R14: ffff888005b1ca18 R15: ffff8880070b5190
FS: 00007f4539f0b740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055670baf3000 CR3: 0000000005b0e000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
<IRQ>
skb_push (net/core/skbuff.c:210)
ipv6_rthdr_rcv (./include/linux/skbuff.h:2880 net/ipv6/exthdrs.c:634 net/ipv6/exthdrs.c:718)
ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:437 (discriminator 5))
ip6_input_finish (./include/linux/rcupdate.h:805 net/ipv6/ip6_input.c:483)
__netif_receive_skb_one_core (net/core/dev.c:5494)
process_backlog (./include/linux/rcupdate.h:805 net/core/dev.c:5934)
__napi_poll (net/core/dev.c:6496)
net_rx_action (net/core/dev.c:6565 net/core/dev.c:6696)
__do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:572)
do_softirq (kernel/softirq.c:472 kernel/softirq.c:459)
</IRQ>
<TASK>
__local_bh_enable_ip (kernel/softirq.c:396)
__dev_queue_xmit (net/core/dev.c:4272)
ip6_finish_output2 (./include/net/neighbour.h:544 net/ipv6/ip6_output.c:134)
rawv6_sendmsg (./include/net/dst.h:458 ./include/linux/netfilter.h:303 net/ipv6/raw.c:656 net/ipv6/raw.c:914)
sock_sendmsg (net/socket.c:724 net/socket.c:747)
__sys_sendto (net/socket.c:2144)
__x64_sys_sendto (net/socket.c:2156 net/socket.c:2152 net/socket.c:2152)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
RIP: 0033:0x7f453a138aea
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
RSP: 002b:00007ffcc212a1c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007ffcc212a288 RCX: 00007f453a138aea
RDX: 0000000000000060 RSI: 00007f4539084c20 RDI: 0000000000000003
RBP: 00007f4538308e80 R08: 00007ffcc212a300 R09: 000000000000001c
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: ffffffffc4653600 R14: 0000000000000001 R15: 00007f4539712d1b
</TASK>
Modules linked in:
Fixes: 8610c7c6e3 ("net: ipv6: add support for rpl sr exthdr")
Reported-by: Max VA
Closes: https://www.interruptlabs.co.uk/articles/linux-ipv6-route-of-death
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230605180617.67284-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24e227896b ]
syzkaller found a repro that causes Hung Task [0] with ipset. The repro
first creates an ipset and then tries to delete a large number of IPs
from the ipset concurrently:
IPSET_ATTR_IPADDR_IPV4 : 172.20.20.187
IPSET_ATTR_CIDR : 2
The first deleting thread hogs a CPU with nfnl_lock(NFNL_SUBSYS_IPSET)
held, and other threads wait for it to be released.
Previously, the same issue existed in set->variant->uadt() that could run
so long under ip_set_lock(set). Commit 5e29dc36bd ("netfilter: ipset:
Rework long task execution when adding/deleting entries") tried to fix it,
but the issue still exists in the caller with another mutex.
While adding/deleting many IPs, we should release the CPU periodically to
prevent someone from abusing ipset to hang the system.
Note we need to increment the ipset's refcnt to prevent the ipset from
being destroyed while rescheduling.
[0]:
INFO: task syz-executor174:268 blocked for more than 143 seconds.
Not tainted 6.4.0-rc1-00145-gba79e9a73284 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor174 state:D stack:0 pid:268 ppid:260 flags:0x0000000d
Call trace:
__switch_to+0x308/0x714 arch/arm64/kernel/process.c:556
context_switch kernel/sched/core.c:5343 [inline]
__schedule+0xd84/0x1648 kernel/sched/core.c:6669
schedule+0xf0/0x214 kernel/sched/core.c:6745
schedule_preempt_disabled+0x58/0xf0 kernel/sched/core.c:6804
__mutex_lock_common kernel/locking/mutex.c:679 [inline]
__mutex_lock+0x6fc/0xdb0 kernel/locking/mutex.c:747
__mutex_lock_slowpath+0x14/0x20 kernel/locking/mutex.c:1035
mutex_lock+0x98/0xf0 kernel/locking/mutex.c:286
nfnl_lock net/netfilter/nfnetlink.c:98 [inline]
nfnetlink_rcv_msg+0x480/0x70c net/netfilter/nfnetlink.c:295
netlink_rcv_skb+0x1c0/0x350 net/netlink/af_netlink.c:2546
nfnetlink_rcv+0x18c/0x199c net/netfilter/nfnetlink.c:658
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x664/0x8cc net/netlink/af_netlink.c:1365
netlink_sendmsg+0x6d0/0xa4c net/netlink/af_netlink.c:1913
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0x4b8/0x810 net/socket.c:2503
___sys_sendmsg net/socket.c:2557 [inline]
__sys_sendmsg+0x1f8/0x2a4 net/socket.c:2586
__do_sys_sendmsg net/socket.c:2595 [inline]
__se_sys_sendmsg net/socket.c:2593 [inline]
__arm64_sys_sendmsg+0x80/0x94 net/socket.c:2593
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall+0x84/0x270 arch/arm64/kernel/syscall.c:52
el0_svc_common+0x134/0x24c arch/arm64/kernel/syscall.c:142
do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:193
el0_svc+0x2c/0x7c arch/arm64/kernel/entry-common.c:637
el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:655
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591
Reported-by: syzkaller <syzkaller@googlegroups.com>
Fixes: a7b4f989a6 ("netfilter: ipset: IP set core support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1f543dc66 ]
An nf_conntrack_helper from nf_conn_help may become NULL after DNAT.
Observed when TCP port 1720 (Q931_PORT), associated with h323 conntrack
helper, is DNAT'ed to another destination port (e.g. 1730), while
nfqueue is being used for final acceptance (e.g. snort).
This happenned after transition from kernel 4.14 to 5.10.161.
Workarounds:
* keep the same port (1720) in DNAT
* disable nfqueue
* disable/unload h323 NAT helper
$ linux-5.10/scripts/decode_stacktrace.sh vmlinux < /tmp/kernel.log
BUG: kernel NULL pointer dereference, address: 0000000000000084
[..]
RIP: 0010:nf_conntrack_update (net/netfilter/nf_conntrack_core.c:2080 net/netfilter/nf_conntrack_core.c:2134) nf_conntrack
[..]
nfqnl_reinject (net/netfilter/nfnetlink_queue.c:237) nfnetlink_queue
nfqnl_recv_verdict (net/netfilter/nfnetlink_queue.c:1230) nfnetlink_queue
nfnetlink_rcv_msg (net/netfilter/nfnetlink.c:241) nfnetlink
[..]
Fixes: ee04805ff5 ("netfilter: conntrack: make conntrack userspace helpers work again")
Signed-off-by: Tijs Van Buggenhout <tijs.van.buggenhout@axsguard.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14e8b29390 ]
At the end of `nft_bitwise_reduce`, there is a loop which is intended to
update the bitwise expression associated with each tracked destination
register. However, currently, it just updates the first register
repeatedly. Fix it.
Fixes: 34cc9e5288 ("netfilter: nf_tables: cancel tracking for clobbered destination registers")
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e54ed8247 ]
This should use wiphy_lock() now instead of acquiring the
RTNL, since cfg80211_stop_sched_scan_req() now needs that.
Fixes: a05829a722 ("cfg80211: avoid holding the RTNL when calling the driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68c228557d ]
There were two bugs when creating the non-inheritence
element:
1) 'at_extension' needs to be declared outside the loop,
otherwise the value resets every iteration and we
can never really switch properly
2) 'added' never got set to true, so we always cut off
the extension element again at the end of the function
This shows another issue that we might add a list but no
extension list, but we need to make the extension list a
zero-length one in that case.
Fix all these issues. While at it, add a comment explaining
the trim.
Fixes: 81151ce462 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230604120651.3addaa5c4782.If3a78f9305997ad7ef4ba7ffc17a8234c956f613@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75767213f3 ]
When receiving a connect response we should make sure that the DCID is
within the valid range and that we don't already have another channel
allocated for the same DCID.
Missing checks may violate the specification (BLUETOOTH CORE SPECIFICATION
Version 5.4 | Vol 3, Part A, Page 1046).
Fixes: 40624183c2 ("Bluetooth: L2CAP: Add missing checks for invalid LE DCID")
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c242c64a0 ]
Consider existing BOUND & CONNECT state CIS to block CIG removal.
Otherwise, under suitable timing conditions we may attempt to remove CIG
while Create CIS is pending, which fails.
Fixes: 26afbd826e ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02c5ea5246 ]
L2CAP assumes that the locks conn->chan_lock and chan->lock are
acquired in the order conn->chan_lock, chan->lock to avoid
potential deadlock.
For example, l2sock_shutdown acquires these locks in the order:
mutex_lock(&conn->chan_lock)
l2cap_chan_lock(chan)
However, l2cap_disconnect_req acquires chan->lock in
l2cap_get_chan_by_scid first and then acquires conn->chan_lock
before calling l2cap_chan_del. This means that these locks are
acquired in unexpected order, which leads to potential deadlock:
l2cap_chan_lock(c)
mutex_lock(&conn->chan_lock)
This patch releases chan->lock before acquiring the conn_chan_lock
to avoid the potential deadlock.
Fixes: a2a9339e1c ("Bluetooth: L2CAP: Fix use-after-free in l2cap_disconnect_{req,rsp}")
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1857c19941 ]
When the HCI_UNREGISTER flag is set, no jobs should be scheduled. Fix
potential race when HCI_UNREGISTER is set after the flag is tested in
hci_cmd_sync_queue.
Fixes: 0b94f2651f ("Bluetooth: hci_sync: Fix queuing commands when HCI_UNREGISTER is set")
Signed-off-by: Zhengping Jiang <jiangzp@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fdebd850cc ]
The rx_bytes statistics of XDP are always zero, because rx_byte_cnt
is not updated after it is initialized to 0. So fix it.
Fixes: d1b15102dd ("net: enetc: add support for XDP_DROP and XDP_PASS")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7190d0ff0e ]
The rx_bytes of struct net_device_stats should count the length of
ethernet frames excluding the FCS. However, there are two problems
with the rx_bytes statistics of the current enetc driver. one is
that the length of VLAN header is not counted if the VLAN extraction
feature is enabled. The other is that the length of L2 header is not
counted, because eth_type_trans() is invoked before updating rx_bytes
which will subtract the length of L2 header from skb->len.
BTW, the rx_bytes statistics of XDP path also have similar problem,
I will fix it in another patch.
Fixes: a800abd3ec ("net: enetc: move skb creation into enetc_build_skb")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c308e9ec00 ]
SMCRv1 has a similar issue to SMCRv2 (see link below) that may access
invalid MRs of RMBs when construct LLC ADD LINK CONT messages.
BUG: kernel NULL pointer dereference, address: 0000000000000014
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 5 PID: 48 Comm: kworker/5:0 Kdump: loaded Tainted: G W E 6.4.0-rc3+ #49
Workqueue: events smc_llc_add_link_work [smc]
RIP: 0010:smc_llc_add_link_cont+0x160/0x270 [smc]
RSP: 0018:ffffa737801d3d50 EFLAGS: 00010286
RAX: ffff964f82144000 RBX: ffffa737801d3dd8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff964f81370c30
RBP: ffffa737801d3dd4 R08: ffff964f81370000 R09: ffffa737801d3db0
R10: 0000000000000001 R11: 0000000000000060 R12: ffff964f82e70000
R13: ffff964f81370c38 R14: ffffa737801d3dd3 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff9652bfd40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000014 CR3: 000000008fa20004 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
smc_llc_srv_rkey_exchange+0xa7/0x190 [smc]
smc_llc_srv_add_link+0x3ae/0x5a0 [smc]
smc_llc_add_link_work+0xb8/0x140 [smc]
process_one_work+0x1e5/0x3f0
worker_thread+0x4d/0x2f0
? __pfx_worker_thread+0x10/0x10
kthread+0xe5/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
</TASK>
When an alernate RNIC is available in system, SMC will try to add a new
link based on the RNIC for resilience. All the RMBs in use will be mapped
to the new link. Then the RMBs' MRs corresponding to the new link will
be filled into LLC messages. For SMCRv1, they are ADD LINK CONT messages.
However smc_llc_add_link_cont() may mistakenly access to unused RMBs which
haven't been mapped to the new link and have no valid MRs, thus causing a
crash. So this patch fixes it.
Fixes: 87f88cda21 ("net/smc: rkey processing for a new link as SMC client")
Link: https://lore.kernel.org/r/1685101741-74826-3-git-send-email-guwen@linux.alibaba.com
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit edf2e1d201 ]
skip_notify_on_dev_down ctl table expects this field
to be an int (4 bytes), not a bool (1 byte).
Because proc_dou8vec_minmax() was added in 5.13,
this patch converts skip_notify_on_dev_down to an int.
Following patch then converts the field to u8 and use proc_dou8vec_minmax().
Fixes: 7c6bb7d2fa ("net/ipv6: Add knob to skip DELROUTE message on device down")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cba41bb78d ]
Commit d937bc3449 ("bpf: make uniform use of array->elem_size
everywhere in arraymap.c") changed array_map_gen_lookup to use
array->elem_size instead of round_up(map->value_size, 8) as the element
size when generating code to access a value in an array map.
array->elem_size, however, is not set by bpf_map_meta_alloc when
initializing an BPF_MAP_TYPE_ARRAY_OF_MAPS or BPF_MAP_TYPE_HASH_OF_MAPS.
This results in array_map_gen_lookup incorrectly outputting code that
always accesses index 0 in the array (as the index will be calculated
via a multiplication with the element size, which is incorrectly set to
0).
Set elem_size on the bpf_array object when allocating an array or hash
of maps to fix this.
Fixes: d937bc3449 ("bpf: make uniform use of array->elem_size everywhere in arraymap.c")
Signed-off-by: Rhys Rustad-Elliott <me@rhysre.net>
Link: https://lore.kernel.org/r/20230602190110.47068-2-me@rhysre.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0fd1852bc ]
When task local storage was generalized for tracing programs, the
bpf_task_local_storage callback was moved from a BPF LSM hook
callback for security_task_free LSM hook to it's own callback. But a
failure case in bad_fork_cleanup_security was missed which, when
triggered, led to a dangling task owner pointer and a subsequent
use-after-free. Move the bpf_task_storage_free to the very end of
free_task to handle all failure cases.
This issue was noticed when a BPF LSM program was attached to the
task_alloc hook on a kernel with KASAN enabled. The program used
bpf_task_storage_get to copy the task local storage from the current
task to the new task being created.
Fixes: a10787e6d5 ("bpf: Enable task local storage for tracing programs")
Reported-by: Kuba Piecuch <jpiecuch@google.com>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230602002612.1117381-1-kpsingh@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e209fee411 ]
With this commit, all the GIDs ("0 4294967294") can be written to the
"net.ipv4.ping_group_range" sysctl.
Note that 4294967295 (0xffffffff) is an invalid GID (see gid_valid() in
include/linux/uidgid.h), and an attempt to register this number will cause
-EINVAL.
Prior to this commit, only up to GID 2147483647 could be covered.
Documentation/networking/ip-sysctl.rst had "0 4294967295" as an example
value, but this example was wrong and causing -EINVAL.
Fixes: c319b4d76b ("net: ipv4: add IPPROTO_ICMP socket kind")
Co-developed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed779fe4c9 ]
After the blamed commit, the member key is longer 4-byte aligned. On
platforms that do not support unaligned access, e.g., MIPS32R2 with
unaligned_action set to 1, this will trigger a crash when accessing
an IPv6 pneigh_entry, as the key is cast to an in6_addr pointer.
Change the type of the key to u32 to make it aligned.
Fixes: 62dd93181a ("[IPV6] NDISC: Set per-entry is_router flag in Proxy NA.")
Signed-off-by: Qingfang DENG <qingfang.deng@siflower.com.cn>
Link: https://lore.kernel.org/r/20230601015432.159066-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a27648c742 ]
kafs incorrectly passes a zero mtime (ie. 1st Jan 1970) to the server when
creating a file, dir or symlink because the mtime recorded in the
afs_operation struct gets passed to the server by the marshalling routines,
but the afs_mkdir(), afs_create() and afs_symlink() functions don't set it.
This gets masked if a file or directory is subsequently modified.
Fix this by filling in op->mtime before calling the create op.
Fixes: e49c7b2f6d ("afs: Build an abstraction around an "operation" concept")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c331fd1dc ]
It is usually better to request all necessary resources (clocks,
regulators, ...) before starting to make use of them. That way they do
not change state in case one of the resources is not available yet and
probe deferral (-EPROBE_DEFER) is necessary. This is particularly
important for DMA channels and IOMMUs which are not enforced by
fw_devlink yet (unless you use fw_devlink.strict=1).
spi-qup does this in the wrong order, the clocks are enabled and
disabled again when the DMA channels are not available yet.
This causes issues in some cases: On most SoCs one of the SPI QUP
clocks is shared with the UART controller. When using earlycon UART is
actively used during boot but might not have probed yet, usually for
the same reason (waiting for the DMA controller). In this case, the
brief enable/disable cycle ends up gating the clock and further UART
console output will halt the system completely.
Avoid this by requesting the DMA channels before changing the clock
state.
Fixes: 612762e82a ("spi: qup: Add DMA capabilities")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230518-spi-qup-clk-defer-v1-1-f49fc9ca4e02@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9bed667033 ]
Devices with a type-cover have an additional "book" mode, deactivating
type-cover input and turning off its backlight. This is currently
unsupported, leading to the warning
surface_aggregator_tablet_mode_switch 01:0e:01:00:01: unknown KIP cover state: 6
Therefore, add support for this state and map it to enable tablet-mode.
Fixes: 9f794056db ("platform/surface: Add KIP/POS tablet-mode switch driver")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230525213218.2797480-2-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 539e0a7f91 ]
Currently, event completion work-items are restricted to be run strictly
in non-parallel fashion by the respective workqueue. However, this has
lead to some problems:
In some instances, the event notifier function called inside this
completion workqueue takes a non-negligible amount of time to execute.
One such example is the battery event handling code (surface_battery.c),
which can result in a full battery information refresh, involving
further synchronous communication with the EC inside the event handler.
This is made worse if the communication fails spuriously, generally
incurring a multi-second timeout.
Since the event completions are run strictly non-parallel, this blocks
other events from being propagated to the respective subsystems. This
becomes especially noticeable for keyboard and touchpad input, which
also funnel their events through this system. Here, users have reported
occasional multi-second "freezes".
Note, however, that the event handling system was never intended to run
purely sequentially. Instead, we have one work struct per EC/SAM
subsystem, processing the event queue for that subsystem. These work
structs were intended to run in parallel, allowing sequential processing
of work items for each subsystem but parallel processing of work items
across subsystems.
The only restriction to this is the way the workqueue is created.
Therefore, replace create_workqueue() with alloc_workqueue() and do not
restrict the maximum number of parallel work items to be executed on
that queue, resolving any cross-subsystem blockage.
Fixes: c167b9c7e3 ("platform/surface: Add Surface Aggregator subsystem")
Link: https://github.com/linux-surface/linux-surface/issues/1026
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230525210110.2785470-1-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 04361b8bb8 upstream.
Andrew reports that the SFF modules on one of the ZII platforms do not
indicate link up due to the SFP code believing that LOS indicating that
there is no signal being received from the remote end, but in fact the
LOS signal is showing that there is signal.
What makes SFF modules different from SFPs is they typically have an
inverted LOS, which uncovered this issue. When we read the hardware
state, we mask it with state_hw_mask so we ignore anything we're not
interested in. However, we don't re-read when state_hw_mask changes,
leading to sfp->state being stale.
Arrange for a software poll of the module state after we have parsed
the EEPROM in sfp_sm_mod_probe() and updated state_*_mask. This will
generate any necessary events for signal changes for the state
machine as well as updating sfp->state.
Reported-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 8475c4b70b ("net: sfp: re-implement soft state polling setup")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb1f822c76 upstream.
In commit a44be64bbe ("ext4: don't clear SB_RDONLY when remounting
r/w until quota is re-enabled") we defer clearing tyhe SB_RDONLY flag
in struct super. However, we didn't defer when we checked sb_rdonly()
to determine the lazy itable init thread should be enabled, with the
next result that the lazy inode table initialization would not be
properly started. This can cause generic/231 to fail in ext4's
nojournal mode.
Fix this by moving when we decide to start or stop the lazy itable
init thread to after we clear the SB_RDONLY flag when we are
remounting the file system read/write.
Fixes a44be64bbe ("ext4: don't clear SB_RDONLY when remounting r/w until...")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230527035729.1001605-1-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb684408f3 upstream.
Instead of using the SMBIOS type 1 record 'family' field, which is often
modified by OEMs, use the type 4 'processor ID' and 'processor version'
fields, which are set to a small set of probe-able values on all known
Ampere EFI systems in the field.
Fixes: 550b33cfd4 ("arm64: efi: Force the use of ...")
Tested-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 74836ec828 upstream.
When receive buffer is small, or the TCP rx queue looks too
complicated to bother using it directly - we allocate a new
skb and copy data into it.
We already use sk->sk_allocation... but nothing actually
sets it to GFP_ATOMIC on the ->sk_data_ready() path.
Users of HW offload are far more likely to experience problems
due to scheduling while atomic. "Copy mode" is very rarely
triggered with SW crypto.
Fixes: 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 22ed903eee upstream.
syzbot detected a crash during log recovery:
XFS (loop0): Mounting V5 Filesystem bfdc47fc-10d8-4eed-a562-11a831b3f791
XFS (loop0): Torn write (CRC failure) detected at log block 0x180. Truncating head block from 0x200.
XFS (loop0): Starting recovery (logdev: internal)
==================================================================
BUG: KASAN: slab-out-of-bounds in xfs_btree_lookup_get_block+0x15c/0x6d0 fs/xfs/libxfs/xfs_btree.c:1813
Read of size 8 at addr ffff88807e89f258 by task syz-executor132/5074
CPU: 0 PID: 5074 Comm: syz-executor132 Not tainted 6.2.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1b1/0x290 lib/dump_stack.c:106
print_address_description+0x74/0x340 mm/kasan/report.c:306
print_report+0x107/0x1f0 mm/kasan/report.c:417
kasan_report+0xcd/0x100 mm/kasan/report.c:517
xfs_btree_lookup_get_block+0x15c/0x6d0 fs/xfs/libxfs/xfs_btree.c:1813
xfs_btree_lookup+0x346/0x12c0 fs/xfs/libxfs/xfs_btree.c:1913
xfs_btree_simple_query_range+0xde/0x6a0 fs/xfs/libxfs/xfs_btree.c:4713
xfs_btree_query_range+0x2db/0x380 fs/xfs/libxfs/xfs_btree.c:4953
xfs_refcount_recover_cow_leftovers+0x2d1/0xa60 fs/xfs/libxfs/xfs_refcount.c:1946
xfs_reflink_recover_cow+0xab/0x1b0 fs/xfs/xfs_reflink.c:930
xlog_recover_finish+0x824/0x920 fs/xfs/xfs_log_recover.c:3493
xfs_log_mount_finish+0x1ec/0x3d0 fs/xfs/xfs_log.c:829
xfs_mountfs+0x146a/0x1ef0 fs/xfs/xfs_mount.c:933
xfs_fs_fill_super+0xf95/0x11f0 fs/xfs/xfs_super.c:1666
get_tree_bdev+0x400/0x620 fs/super.c:1282
vfs_get_tree+0x88/0x270 fs/super.c:1489
do_new_mount+0x289/0xad0 fs/namespace.c:3145
do_mount fs/namespace.c:3488 [inline]
__do_sys_mount fs/namespace.c:3697 [inline]
__se_sys_mount+0x2d3/0x3c0 fs/namespace.c:3674
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f89fa3f4aca
Code: 83 c4 08 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fffd5fb5ef8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 00646975756f6e2c RCX: 00007f89fa3f4aca
RDX: 0000000020000100 RSI: 0000000020009640 RDI: 00007fffd5fb5f10
RBP: 00007fffd5fb5f10 R08: 00007fffd5fb5f50 R09: 000000000000970d
R10: 0000000000200800 R11: 0000000000000206 R12: 0000000000000004
R13: 0000555556c6b2c0 R14: 0000000000200800 R15: 00007fffd5fb5f50
</TASK>
The fuzzed image contains an AGF with an obviously garbage
agf_refcount_level value of 32, and a dirty log with a buffer log item
for that AGF. The ondisk AGF has a higher LSN than the recovered log
item. xlog_recover_buf_commit_pass2 reads the buffer, compares the
LSNs, and decides to skip replay because the ondisk buffer appears to be
newer.
Unfortunately, the ondisk buffer is corrupt, but recovery just read the
buffer with no buffer ops specified:
error = xfs_buf_read(mp->m_ddev_targp, buf_f->blf_blkno,
buf_f->blf_len, buf_flags, &bp, NULL);
Skipping the buffer leaves its contents in memory unverified. This sets
us up for a kernel crash because xfs_refcount_recover_cow_leftovers
reads the buffer (which is still around in XBF_DONE state, so no read
verification) and creates a refcountbt cursor of height 32. This is
impossible so we run off the end of the cursor object and crash.
Fix this by invoking the verifier on all skipped buffers and aborting
log recovery if the ondisk buffer is corrupt. It might be smarter to
force replay the log item atop the buffer and then see if it'll pass the
write verifier (like ext4 does) but for now let's go with the
conservative option where we stop immediately.
Link: https://syzkaller.appspot.com/bug?extid=7e9494b8b399902e994e
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reported-by: Danila Chernetsov <listdansp@mail.ru>
Link: https://lore.kernel.org/linux-xfs/20230601164439.15404-1-listdansp@mail.ru
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 482e6ad9ad upstream.
At drm suspend sequence, MST dc_sink is removed. When commit cached
MST stream back in drm resume sequence, the MST stream payload is not
properly created and added into the payload table. After resume, topology
change is reprobed by removing existing streams first. That leads to
no payload is found in the existing payload table as below error
"[drm] ERROR No payload for [MST PORT:] found in mst state"
1. In encoder .atomic_check routine, remove check existance of dc_sink
2. Bypass MST by checking existence of MST root port. dc_link_type cannot
differentiate MST port before topology is rediscovered.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Adjusted for variables that were renamed between 6.1 and 6.3.]
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 11c439a194 upstream.
IOMMU v2 page table supports 4 level (47 bit) or 5 level (56 bit) virtual
address space. Current code assumes it can support 64bit IOVA address
space. If IOVA allocator allocates virtual address > 47/56 bit (depending
on page table level) then it will do wrong mapping and cause invalid
translation.
Hence adjust aperture size to use max address supported by the page table.
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Fixes: aaac38f614 ("iommu/amd: Initial support for AMD IOMMU v2 page table")
Cc: <Stable@vger.kernel.org> # v6.0+
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20230518054351.9626-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
[ Modified to work with "V2 with 4 level page table" only - Vasant ]
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
