commit 0686a818d77a431fc3ba2fab4b46bbb04e8c9380 upstream.
A client driver may use mhi_unprepare_from_transfer() to quiesce
incoming data during the client driver's tear down. The client driver
might also be processing data at the same time, resulting in a call to
mhi_queue_buf() which will invoke mhi_gen_tre(). If mhi_gen_tre() runs
after mhi_unprepare_from_transfer() has torn down the channel, a panic
will occur due to an invalid dereference leading to a page fault.
This occurs because mhi_gen_tre() does not verify the channel state
after locking it. Fix this by having mhi_gen_tre() confirm the channel
state is valid, or return error to avoid accessing deinitialized data.
Cc: stable@vger.kernel.org # 6.8
Fixes: b89b6a863dd5 ("bus: mhi: host: Add spinlock to protect WP access when queueing TREs")
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Reviewed-by: Youssef Samir <quic_yabdulra@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Troy Hanson <quic_thanson@quicinc.com>
Link: https://lore.kernel.org/r/20250306172913.856982-1-jeff.hugo@oss.qualcomm.com
[mani: added stable tag]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7eccc86e90f04a0d758d16c08627a620ac59604d upstream.
In case of attempts to compress playback something, for instance,
when audio routing is not set up correctly, the audio DSP is left in
inconsistent state because we are not doing the correct things in
the error path of q6asm_dai_compr_set_params().
So, when routing is not set up and compress playback is attempted
the following errors are present (simplified log):
q6routing routing: Routing not setup for MultiMedia-1 Session
q6asm-dai dais: Stream reg failed ret:-22
q6asm-dai dais: ASoC error (-22): at snd_soc_component_compr_set_params()
on 17300000.remoteproc:glink-edge:apr:service@7:dais
After setting the correct routing the compress playback will always fail:
q6asm-dai dais: cmd = 0x10db3 returned error = 0x9
q6asm-dai dais: DSP returned error[9]
q6asm-dai dais: q6asm_open_write failed
q6asm-dai dais: ASoC error (-22): at snd_soc_component_compr_set_params()
on 17300000.remoteproc:glink-edge:apr:service@7:dais
0x9 here means "Operation is already processed". The CMD_OPEN here was
sent the second time hence DSP responds that it was already done.
Turns out the CMD_CLOSE should be sent after the q6asm_open_write()
succeeded but something failed after that, for instance, routing
setup.
Fix this by slightly reworking the error path in
q6asm_dai_compr_set_params().
Tested on QRB5165 RB5 and SDM845 RB3 boards.
Cc: stable@vger.kernel.org
Fixes: 5b39363e54 ("ASoC: q6asm-dai: prepare set params to accept profile change")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://patch.msgid.link/20250327154650.337404-1-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3107019501842c27334554ba9d6583b1f200f61f upstream.
DSP expects the periods to be aligned to fragment sizes, currently
setting up to hw constriants on periods bytes is not going to work
correctly as we can endup with periods sizes aligned to 32 bytes however
not aligned to fragment size.
Update the constriants to use fragment size, and also set at step of
10ms for period size to accommodate DSP requirements of 10ms latency.
Fixes: 9b4fe0f1cd ("ASoC: qdsp6: audioreach: add q6apm-dai support")
Cc: stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://patch.msgid.link/20250314174800.10142-5-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1ebc8e1ef906db9c08e9abe9776d85ddec837725 upstream.
Implement the workaround for erratum
3.3 RGMII timing may be out of spec when transmit delay is enabled
for the 6320 family, which says:
When transmit delay is enabled via Port register 1 bit 14 = 1, duty
cycle may be out of spec. Under very rare conditions this may cause
the attached device receive CRC errors.
Signed-off-by: Marek Behún <kabel@kernel.org>
Cc: <stable@vger.kernel.org> # 5.4.x
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250317173250.28780-8-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8c39633759885b6ff85f6d96cf445560e74df5e8 upstream.
When adding a socket option support in MPTCP, both the get and set parts
are supposed to be implemented.
IPV6_V6ONLY support for the setsockopt part has been added a while ago,
but it looks like the get part got forgotten. It should have been
present as a way to verify a setting has been set as expected, and not
to act differently from TCP or any other socket types.
Not supporting this getsockopt(IPV6_V6ONLY) blocks some apps which want
to check the default value, before doing extra actions. On Linux, the
default value is 0, but this can be changed with the net.ipv6.bindv6only
sysctl knob. On Windows, it is set to 1 by default. So supporting the
get part, like for all other socket options, is important.
Everything was in place to expose it, just the last step was missing.
Only new code is added to cover this specific getsockopt(), that seems
safe.
Fixes: c9b95a1359 ("mptcp: support IPV6_V6ONLY setsockopt")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/550
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314-net-mptcp-fix-data-stream-corr-sockopt-v1-2-122dbb249db3@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9edaaa8e3e15aab1ca413ab50556de1975bcb329 upstream.
words_count denotes the number of words in total payload, while data
points to payload of various property within it. When words_count
reaches last word, data can access memory beyond the total payload. This
can lead to OOB access. With this patch, the utility api for handling
individual properties now returns the size of data consumed. Accordingly
remaining bytes are calculated before parsing the payload, thereby
eliminates the OOB access possibilities.
Cc: stable@vger.kernel.org
Fixes: 1a73374a04 ("media: venus: hfi_parser: add common capability parser")
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 172bf5a9ef70a399bb227809db78442dc01d9e48 upstream.
There is a possibility that init_codecs is invoked multiple times during
manipulated payload from video firmware. In such case, if codecs_count
can get incremented to value more than MAX_CODEC_NUM, there can be OOB
access. Reset the count so that it always starts from beginning.
Cc: stable@vger.kernel.org
Fixes: 1a73374a04 ("media: venus: hfi_parser: add common capability parser")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 80704d14f1bd3628f578510e0a88b66824990ef6 upstream.
Set the device's runtime PM status to suspended in probe error paths where
it was previously set to active.
Fixes: 9447082ae6 ("[media] smiapp: Implement power-on and power-off sequences without runtime PM")
Cc: stable@vger.kernel.org # for >= v5.15
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e04604583095faf455b3490b004254a225fd60d4 upstream.
Set the device's runtime PM status to suspended in device removal only if
it wasn't suspended already.
Fixes: 9447082ae6 ("[media] smiapp: Implement power-on and power-off sequences without runtime PM")
Cc: stable@vger.kernel.org # for >= v5.15
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3edd1fc48d2c045e8259561797c89fe78f01717e upstream.
In v4l2_detect_gtf(), it seems safer to cast the 32-bit image_width
variable to the 64-bit type u64 before multiplying to avoid
a possible overflow. The resulting object code even seems to
look better, at least on x86_64.
Found by Linux Verification Center (linuxtesting.org) with Svace.
[Sergey: rewrote the patch subject/descripition]
Fixes: c9bc9f5075 ("[media] v4l2-dv-timings: fix overflow in gtf timings calculation")
Cc: stable@vger.kernel.org
Signed-off-by: Karina Yankevich <k.yankevich@omp.ru>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 549f6d348167fb2f7800ed7c8d4bce9630c74498 upstream.
If streamzap_callback() receives an urb with any non-critical error
status, i.e. any error code other than -ECONNRESET, -ENOENT or -ESHUTDOWN,
it will try to process IR data, ignoring a possible transfer failure.
Make streamzap_callback() process IR data only when urb->status is 0.
Move processing logic to a separate function to make code cleaner and
more similar to the URB completion handlers in other RC drivers.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 19770693c3 ("V4L/DVB: staging/lirc: add lirc_streamzap driver")
Cc: stable@vger.kernel.org
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7146dffa875cd00e7a7f918e1fce79c7593ac1fa upstream.
The change to only use interrupts to handle supported status changes
introduced an issue when it is necessary to poll for the status. Rather
than checking for the status after sleeping the code now sleeps after
the check. This means a correct, but slower, status change on the part
of the TPM can be missed, resulting in a spurious timeout error,
especially on a more loaded system. Switch back to sleeping *then*
checking. An up front check of the status has been done at the start of
the function, so this does not cause an additional delay when the status
is already what we're looking for.
Cc: stable@vger.kernel.org # v6.4+
Fixes: e87fcf0dc2 ("tpm, tpm_tis: Only handle supported interrupts")
Signed-off-by: Jonathan McDowell <noodles@meta.com>
Reviewed-by: Michal Suchánek <msuchanek@suse.de>
Reviewed-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b8665a1b49f5498edb7b21d730030c06b7348a3c upstream.
In 2020, there's been an unnoticed change which rightfully attempted to
report probe deferrals upon DMA absence by checking the return value of
dma_request_chan_by_mask(). By doing so, it also reported errors which
were simply ignored otherwise, likely on purpose.
This change actually turned a void return into an error code. Hence, not
only the -EPROBE_DEFER error codes but all error codes got reported to
the callers, now failing to probe in the absence of Rx DMA channel,
despite the fact that DMA seems to not be supported natively by many
implementations.
Looking at the history, this change probably led to:
ad2775dc3f ("spi: cadence-quadspi: Disable the DAC for Intel LGM SoC")
f724c296f2 ("spi: cadence-quadspi: fix Direct Access Mode disable for SoCFPGA")
In my case, the AM62A LP SK core octo-SPI node from TI does not
advertise any DMA channel, hinting that there is likely no support for
it, but yet when the support for the am654 compatible was added, DMA
seemed to be used, so just discarding its use with the
CQSPI_DISABLE_DAC_MODE quirk for this compatible does not seem the
correct approach.
Let's get change the return condition back to:
- return a probe deferral error if we get one
- ignore the return value otherwise
The "error" log level was however likely too high for something that is
expected to fail, so let's lower it arbitrarily to the info level.
Fixes: 935da5e510 ("mtd: spi-nor: cadence-quadspi: Handle probe deferral while requesting DMA channel")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20250305200933.2512925-2-miquel.raynal@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 250f25367b58d8c65a1b060a2dda037eea09a672 upstream.
If kvm_arch_vcpu_create() fails to share the vCPU page with the
hypervisor, we propagate the error back to the ioctl but leave the
vGIC vCPU data initialised. Note only does this leak the corresponding
memory when the vCPU is destroyed but it can also lead to use-after-free
if the redistributor device handling tries to walk into the vCPU.
Add the missing cleanup to kvm_arch_vcpu_create(), ensuring that the
vGIC vCPU structures are destroyed on error.
Cc: <stable@vger.kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Quentin Perret <qperret@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250314133409.9123-1-will@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e403e8538359d8580cbee1976ff71813e947101e upstream.
The code for detecting CPUs that are vulnerable to Spectre BHB was
based on a hardcoded list of CPU IDs that were known to be affected.
Unfortunately, the list mostly only contained the IDs of standard ARM
cores. The IDs for many cores that are minor variants of the standard
ARM cores (like many Qualcomm Kyro CPUs) weren't listed. This led the
code to assume that those variants were not affected.
Flip the code on its head and instead assume that a core is vulnerable
if it doesn't have CSV2_3 but is unrecognized as being safe. This
involves creating a "Spectre BHB safe" list.
As of right now, the only CPU IDs added to the "Spectre BHB safe" list
are ARM Cortex A35, A53, A55, A510, and A520. This list was created by
looking for cores that weren't listed in ARM's list [1] as per review
feedback on v2 of this patch [2]. Additionally Brahma A53 is added as
per mailing list feedback [3].
NOTE: this patch will not actually _mitigate_ anyone, it will simply
cause them to report themselves as vulnerable. If any cores in the
system are reported as vulnerable but not mitigated then the whole
system will be reported as vulnerable though the system will attempt
to mitigate with the information it has about the known cores.
[1] https://developer.arm.com/Arm%20Security%20Center/Spectre-BHB
[2] https://lore.kernel.org/r/20241219175128.GA25477@willie-the-truck
[3] https://lore.kernel.org/r/18dbd7d1-a46c-4112-a425-320c99f67a8d@broadcom.com
Fixes: 558c303c97 ("arm64: Mitigate spectre style branch history side channels")
Cc: stable@vger.kernel.org
Reviewed-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250107120555.v4.2.I2040fa004dafe196243f67ebcc647cbedbb516e6@changeid
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c4e79e29a9fe4ea132118ac40c2bc97cfe23077 upstream.
The interface specifies the symnum field as an input and output; the
hypervisor sets it to the next sequential symbol's index. xensyms_next()
incrementing the position explicitly (and xensyms_next_sym()
decrementing it to "rewind") is only correct as long as the sequence of
symbol indexes is non-sparse. Use the hypervisor-supplied value instead
to update the position in xensyms_next(), and use the saved incoming
index in xensyms_next_sym().
Cc: stable@kernel.org
Fixes: a11f4f0a4e ("xen: xensyms support")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <15d5e7fa-ec5d-422f-9319-d28bed916349@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 734ac57e47b3bdd140a1119e2c4e8e6f8ef8b33d upstream.
The smsdvb_module_init() returns without checking the retval from
smscore_register_hotplug().
If the smscore_register_hotplug() failed, the module failed to install,
leaving the smsdvb_debugfs not unregistered.
Fixes: 3f6b87cff6 ("[media] siano: allow showing the complete statistics via debugfs")
Cc: stable@vger.kernel.org
Signed-off-by: Yuan Can <yuancan@huawei.com>
Acked-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 143d75583f2427f3a97dba62413c4f0604867ebf upstream.
Move the v4l2_info() call displaying the video device name after the
device is actually registered.
This fixes a bug where the driver was always displaying "/dev/video0"
since it was reading from the vfd before it was registered.
Fixes: cf7f34777a ("media: vim2m: Register video device after setting up internals")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Majewski <mattwmajewski@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 69baf245b23e20efda0079238b27fc63ecf13de1 upstream.
qsize represents size of shared queued between driver and video
firmware. Firmware can modify this value to an invalid large value. In
such situation, empty_space will be bigger than the space actually
available. Since new_wr_idx is not checked, so the following code will
result in an OOB write.
...
qsize = qhdr->q_size
if (wr_idx >= rd_idx)
empty_space = qsize - (wr_idx - rd_idx)
....
if (new_wr_idx < qsize) {
memcpy(wr_ptr, packet, dwords << 2) --> OOB write
Add check to ensure qsize is within the allocated size while
reading and writing packets into the queue.
Cc: stable@vger.kernel.org
Fixes: d96d3f30c0 ("[media] media: venus: hfi: add Venus HFI files")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4b211714bcc70effa60c34d9fa613d182e3ef1e upstream.
sfr->buf_size is in shared memory and can be modified by malicious user.
OOB write is possible when the size is made higher than actual sfr data
buffer. Cap the size to allocated size for such cases.
Cc: stable@vger.kernel.org
Fixes: d96d3f30c0 ("[media] media: venus: hfi: add Venus HFI files")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9e38acacb9d809b97a0bdc5c76e725355a47158a upstream.
The mask to select the test-pattern in register ADV748X_SDP_FRP is
incorrect, it's the lower 3 bits which controls the pattern. The
GENMASK() macro is used incorrectly and the generated mask is 0x0e
instead of 0x07.
The result is that not all test patterns are selectable, and that in
some cases the wrong test pattern is activated. Fix this by correcting
the GENMASK().
Fixes: 3e89586a64 ("media: i2c: adv748x: add adv748x driver")
Cc: stable@vger.kernel.org
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: fixed tiny typo in commit log: my -> by]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 642335f3ea2b3fd6dba03e57e01fa9587843a497 ]
A file handle that userspace provides to open_by_handle_at() can
legitimately contain an outdated inode number that has since been reused
for another purpose - that's why the file handle also contains a generation
number.
But if the inode number has been reused for an ea_inode, check_igot_inode()
will notice, __ext4_iget() will go through ext4_error_inode(), and if the
inode was newly created, it will also be marked as bad by iget_failed().
This all happens before the point where the inode generation is checked.
ext4_error_inode() is supposed to only be used on filesystem corruption; it
should not be used when userspace just got unlucky with a stale file
handle. So when this happens, let __ext4_iget() just return an error.
Fixes: b3e6bcb945 ("ext4: add EA_INODE checking to ext4_iget()")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20241129-ext4-ignore-ea-fhandle-v1-1-e532c0d1cee0@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4bac0288a2b444e468e6df9cb4ed69479ddf14a ]
Classic BPF socket filters with SKB_NET_OFF and SKB_LL_OFF fail to
read when these offsets extend into frags.
This has been observed with iwlwifi and reproduced with tun with
IFF_NAPI_FRAGS. The below straightforward socket filter on UDP port,
applied to a RAW socket, will silently miss matching packets.
const int offset_proto = offsetof(struct ip6_hdr, ip6_nxt);
const int offset_dport = sizeof(struct ip6_hdr) + offsetof(struct udphdr, dest);
struct sock_filter filter_code[] = {
BPF_STMT(BPF_LD + BPF_B + BPF_ABS, SKF_AD_OFF + SKF_AD_PKTTYPE),
BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, PACKET_HOST, 0, 4),
BPF_STMT(BPF_LD + BPF_B + BPF_ABS, SKF_NET_OFF + offset_proto),
BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, IPPROTO_UDP, 0, 2),
BPF_STMT(BPF_LD + BPF_H + BPF_ABS, SKF_NET_OFF + offset_dport),
This is unexpected behavior. Socket filter programs should be
consistent regardless of environment. Silent misses are
particularly concerning as hard to detect.
Use skb_copy_bits for offsets outside linear, same as done for
non-SKF_(LL|NET) offsets.
Offset is always positive after subtracting the reference threshold
SKB_(LL|NET)_OFF, so is always >= skb_(mac|network)_offset. The sum of
the two is an offset against skb->data, and may be negative, but it
cannot point before skb->head, as skb_(mac|network)_offset would too.
This appears to go back to when frag support was introduced to
sk_run_filter in linux-2.4.4, before the introduction of git.
The amount of code change and 8/16/32 bit duplication are unfortunate.
But any attempt I made to be smarter saved very few LoC while
complicating the code.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/netdev/20250122200402.3461154-1-maze@google.com/
Link: https://elixir.bootlin.com/linux/2.4.4/source/net/core/filter.c#L244
Reported-by: Matt Moeller <moeller.matt@gmail.com>
Co-developed-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20250408132833.195491-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e7327c193014a4d8666e9c1cda09cf2c060518e8 ]
There were several issues in the function rcar_pwm_set_counter():
- The u64 values period_ns and duty_ns were cast to int on function
call which might loose bits on 32 bit architectures.
Fix: Make parameters to rcar_pwm_set_counter() u64
- The algorithm divided by the result of a division which looses
precision.
Fix: Make use of mul_u64_u64_div_u64()
- The calculated values were just masked to fit the respective register
fields which again might loose bits.
Fix: Explicitly check for overlow
Implement the respective fixes.
A side effect of fixing the 2nd issue is that there is no division by 0
if clk_get_rate() returns 0.
Fixes: ed6c1476bf ("pwm: Add support for R-Car PWM Timer")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/ab3dac794b2216cc1cc56d65c93dd164f8bd461b.1743501688.git.u.kleine-koenig@baylibre.com
[ukleinek: Added an explicit #include <linux/bitfield.h> to please the
0day build bot]
Link: https://lore.kernel.org/oe-kbuild-all/202504031354.VJtxScP5-lkp@intel.com/
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de9e33df7762abbfc2a1568291f2c3a3154c6a9d ]
Some Infineon devices have a issue where the status register will get
stuck with a quick REQUEST_USE / COMMAND_READY sequence. This is not
simply a matter of requiring a longer timeout; the work around is to
retry the command submission. Add appropriate logic to do this in the
send path.
This is fixed in later firmware revisions, but those are not always
available, and cannot generally be easily updated from outside a
firmware environment.
Testing has been performed with a simple repeated loop of doing a
TPM2_CC_GET_CAPABILITY for TPM_CAP_PROP_MANUFACTURER using the Go code
at:
https://the.earth.li/~noodles/tpm-stuff/timeout-reproducer-simple.go
It can take several hours to reproduce, and several million operations.
Signed-off-by: Jonathan McDowell <noodles@meta.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e411827f31db7f938a30a3c7a7599839401ec30 ]
Function dispc_ovl_setup is not intended to work with the value OMAP_DSS_WB
of the enum parameter plane.
The value of this parameter is initialized in dss_init_overlays and in the
current state of the code it cannot take this value so it's not a real
problem.
For the purposes of defensive coding it wouldn't be superfluous to check
the parameter value, because some functions down the call stack process
this value correctly and some not.
For example, in dispc_ovl_setup_global_alpha it may lead to buffer
overflow.
Add check for this value.
Found by Linux Verification Center (linuxtesting.org) with SVACE static
analysis tool.
Signed-off-by: Leonid Arapov <arapovl839@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d9a95099dcb05b5f4719c830d15bf4fdcad0dc2 ]
We keep the gang submission fence around in adev, make sure that it
stays alive.
v2: fix memory leak on retry
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18056a48669a040bef491e63b25896561ee14d90 ]
The access to the PCI config space via pci_ops::read and pci_ops::write is
a low-level hardware access. The functions can be accessed with disabled
interrupts even on PREEMPT_RT. The pci_lock is a raw_spinlock_t for this
purpose.
A spinlock_t becomes a sleeping lock on PREEMPT_RT, so it cannot be
acquired with disabled interrupts. The vmd_dev::cfg_lock is accessed in
the same context as the pci_lock.
Make vmd_dev::cfg_lock a raw_spinlock_t type so it can be used with
interrupts disabled.
This was reported as:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
Call Trace:
rt_spin_lock+0x4e/0x130
vmd_pci_read+0x8d/0x100 [vmd]
pci_user_read_config_byte+0x6f/0xe0
pci_read_config+0xfe/0x290
sysfs_kf_bin_read+0x68/0x90
Signed-off-by: Ryo Takakura <ryotkkr98@gmail.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Acked-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
[bigeasy: reword commit message]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Link: https://lore.kernel.org/r/20250218080830.ufw3IgyX@linutronix.de
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: add back report info from
https://lore.kernel.org/lkml/20241218115951.83062-1-ryotkkr98@gmail.com/]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 473c33f5ce651365468503c76f33158aaa1c7dd2 ]
In preparation for adding support for MT8195's HDMI reserved
DPI, add calls to clk_prepare_enable() / clk_disable_unprepare()
for the TVD clock: in this particular case, the aforementioned
clock is not (and cannot be) parented to neither pixel or engine
clocks hence it won't get enabled automatically by the clock
framework.
Please note that on all of the currently supported MediaTek
platforms, the TVD clock is always a parent of either pixel or
engine clocks, and this means that the common clock framework
is already enabling this clock before the children.
On such platforms, this commit will only increase the refcount
of the TVD clock without any functional change.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250217154836.108895-10-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7919b4cad5545ed93778f11881ceee72e4dbed66 ]
If GPU in reset, destroy_queue return -EIO, pqm_destroy_queue should
delete the queue from process_queue_list and free the resource.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0b4440cdc1807bb6ec3dce0d6de81170803569b ]
If HW scheduler hangs and mode1 reset is used to recover GPU, KFD signal
user space to abort the processes. After process abort exit, user queues
still use the GPU to access system memory before h/w is reset while KFD
cleanup worker free system memory and free VRAM.
There is use-after-free race bug that KFD allocate and reuse the freed
system memory, and user queue write to the same system memory to corrupt
the data structure and cause driver crash.
To fix this race, KFD cleanup worker terminate user queues, then flush
reset_domain wq to wait for any GPU ongoing reset complete, and then
free outstanding BOs.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
