When commit fa78e9b606a472495ef5b6b3d8b45c37f7727f9d upstream was
backported to LTS branches linux-6.12.y and linux-6.6.y, the SPI regmap
config fix got applied to the I2C regmap config. Most likely due to a new
RTC get/set parm feature introduced in 6.14 causing regmap config sections
in the buttom of the driver to move. LTS branch linux-6.1.y and earlier
does not have PCF2131 device support.
Issue can be seen in buttom of this diff in stable/linux.git tree:
git diff master..linux-6.12.y -- drivers/rtc/rtc-pcf2127.c
Fixes: ee61aec8529e ("rtc: pcf2127: fix SPI command byte for PCF2131")
Fixes: 5cdd1f7340 ("rtc: pcf2127: fix SPI command byte for PCF2131")
Cc: stable@vger.kernel.org
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Elena Popa <elena.popa@nxp.com>
Cc: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1e56310b40fd2e7e0b9493da9ff488af145bdd0c ]
The AMD IOMMU host page table implementation supports dynamic page table levels
(up to 6 levels), starting with a 3-level configuration that expands based on
IOVA address. The kernel maintains a root pointer and current page table level
to enable proper page table walks in alloc_pte()/fetch_pte() operations.
The IOMMU IOVA allocator initially starts with 32-bit address and onces its
exhuasted it switches to 64-bit address (max address is determined based
on IOMMU and device DMA capability). To support larger IOVA, AMD IOMMU
driver increases page table level.
But in unmap path (iommu_v1_unmap_pages()), fetch_pte() reads
pgtable->[root/mode] without lock. So its possible that in exteme corner case,
when increase_address_space() is updating pgtable->[root/mode], fetch_pte()
reads wrong page table level (pgtable->mode). It does compare the value with
level encoded in page table and returns NULL. This will result is
iommu_unmap ops to fail and upper layer may retry/log WARN_ON.
CPU 0 CPU 1
------ ------
map pages unmap pages
alloc_pte() -> increase_address_space() iommu_v1_unmap_pages() -> fetch_pte()
pgtable->root = pte (new root value)
READ pgtable->[mode/root]
Reads new root, old mode
Updates mode (pgtable->mode += 1)
Since Page table level updates are infrequent and already synchronized with a
spinlock, implement seqcount to enable lock-free read operations on the read path.
Fixes: 754265bcab ("iommu/amd: Fix race in increase_address_space()")
Reported-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Cc: stable@vger.kernel.org
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
[ Adapted pgtable->mode and pgtable->root to use domain->iop.mode and domain->iop.root ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a5c98e8b1398534ae1feb6e95e2d3ee5215538ed ]
Pending requests will be flushed on disconnect, and the corresponding
TRBs will be turned into No-op TRBs, which are ignored by the xHC
controller once it starts processing the ring.
If the USB debug cable repeatedly disconnects before ring is started
then the ring will eventually be filled with No-op TRBs.
No new transfers can be queued when the ring is full, and driver will
print the following error message:
"xhci_hcd 0000:00:14.0: failed to queue trbs"
This is a normal case for 'in' transfers where TRBs are always enqueued
in advance, ready to take on incoming data. If no data arrives, and
device is disconnected, then ring dequeue will remain at beginning of
the ring while enqueue points to first free TRB after last cancelled
No-op TRB.
s
Solve this by reinitializing the rings when the debug cable disconnects
and DbC is leaving the configured state.
Clear the whole ring buffer and set enqueue and dequeue to the beginning
of ring, and set cycle bit to its initial state.
Cc: stable@vger.kernel.org
Fixes: dfba2174dc ("usb: xhci: Add DbC support in xHCI driver")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250902105306.877476-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 220a0ffde02f962c13bc752b01aa570b8c65a37b ]
Decouple allocation of endpoint ring buffer from initialization
of the buffer, and initialization of endpoint context parts from
from the rest of the contexts.
It allows driver to clear up and reinitialize endpoint rings
after disconnect without reallocating everything.
This is a prerequisite for the next patch that prevents the transfer
ring from filling up with cancelled (no-op) TRBs if a debug cable is
reconnected several times without transferring anything.
Cc: stable@vger.kernel.org
Fixes: dfba2174dc ("usb: xhci: Add DbC support in xHCI driver")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250902105306.877476-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 21bf6fc47a1e45031ba8a7084343b7cfd09ed1d3 ]
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20231009172923.2457844-15-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 64961557efa1 ("phy: ti: omap-usb2: fix device leak at unbind")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 24733e193a0d68f20d220e86da0362460c9aa812 upstream.
The previous commit adds the MPTCP_PM_EV_FLAG_DENY_JOIN_ID0 flag. Make
sure it is correctly announced by the other peer when it has been
received.
pm_nl_ctl will now display 'deny_join_id0:1' when monitoring the events,
and when this flag was set by the other peer.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 702c2f646d ("mptcp: netlink: allow userspace-driven subflow establishment")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-pm-uspace-deny_join_id0-v1-3-40171884ade8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflict in userspace_pm.sh, because of a difference in the context,
introduced by commit c66fb480a330 ("selftests: userspace pm: avoid
relaunching pm events"), which is not in this version. The same lines
can still be added at the same place. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2293c57484ae64c9a3c847c8807db8c26a3a4d41 upstream.
During the connection establishment, a peer can tell the other one that
it cannot establish new subflows to the initial IP address and port by
setting the 'C' flag [1]. Doing so makes sense when the sender is behind
a strict NAT, operating behind a legacy Layer 4 load balancer, or using
anycast IP address for example.
When this 'C' flag is set, the path-managers must then not try to
establish new subflows to the other peer's initial IP address and port.
The in-kernel PM has access to this info, but the userspace PM didn't.
The RFC8684 [1] is strict about that:
(...) therefore the receiver MUST NOT try to open any additional
subflows toward this address and port.
So it is important to tell the userspace about that as it is responsible
for the respect of this flag.
When a new connection is created and established, the Netlink events
now contain the existing but not currently used 'flags' attribute. When
MPTCP_PM_EV_FLAG_DENY_JOIN_ID0 is set, it means no other subflows
to the initial IP address and port -- info that are also part of the
event -- can be established.
Link: https://datatracker.ietf.org/doc/html/rfc8684#section-3.1-20.6 [1]
Fixes: 702c2f646d ("mptcp: netlink: allow userspace-driven subflow establishment")
Reported-by: Marek Majkowski <marek@cloudflare.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/532
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-pm-uspace-deny_join_id0-v1-2-40171884ade8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflicts in mptcp_pm.yaml, and mptcp_pm.h, because these files have
been added later by commit bc8aeb2045e2 ("Documentation: netlink: add
a YAML spec for mptcp"), and commit 9d1ed17f93ce ("uapi: mptcp: use
header file generated from YAML spec"), which are not in this version.
Applying the same modifications, but only in mptcp.h.
Conflict in pm_netlink.c, because of a difference in the context,
introduced by commit b9f4554356f6 ("mptcp: annotate lockless access
for token"), which is not in this version. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0dd765fae295832934bf28e45dd5a355e0891ed4 upstream.
vmxnet3 does not unregister xdp rxq info in the
vmxnet3_reset_work() code path as vmxnet3_rq_destroy()
is not invoked in this code path. So, we get below message with a
backtrace.
Missing unregister, handled but fix driver
WARNING: CPU:48 PID: 500 at net/core/xdp.c:182
__xdp_rxq_info_reg+0x93/0xf0
This patch fixes the problem by moving the unregister
code of XDP from vmxnet3_rq_destroy() to vmxnet3_rq_cleanup().
Fixes: 54f00cce11 ("vmxnet3: Add XDP support.")
Signed-off-by: Sankararaman Jayaraman <sankararaman.jayaraman@broadcom.com>
Signed-off-by: Ronak Doshi <ronak.doshi@broadcom.com>
Link: https://patch.msgid.link/20250320045522.57892-1-sankararaman.jayaraman@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Ajay: Modified to apply on v6.6, v6.12 ]
Signed-off-by: Ajay Kaher <ajay.kaher@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9574b2330dbd2b5459b74d3b5e9619d39299fc6f ]
If an error causes af_alg_sendmsg to abort, ctx->merge may contain
a garbage value from the previous loop. This may then trigger a
crash on the next entry into af_alg_sendmsg when it attempts to do
a merge that can't be done.
Fix this by setting ctx->merge to zero near the start of the loop.
Fixes: 8ff590903d ("crypto: algif_skcipher - User-space interface for skcipher operations")
Reported-by: Muhammad Alifa Ramdhan <ramdhan@starlabs.sg>
Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 3539b1467e94336d5854ebf976d9627bfb65d6c3 upstream.
When running task_work for an exiting task, rather than perform the
issue retry attempt, the task_work is canceled. However, this isn't
done for a ring that has been closed. This can lead to requests being
successfully completed post the ring being closed, which is somewhat
confusing and surprising to an application.
Rather than just check the task exit state, also include the ring
ref state in deciding whether or not to terminate a given request when
run from task_work.
Cc: stable@vger.kernel.org # 6.1+
Link: https://github.com/axboe/liburing/discussions/1459
Reported-by: Benedek Thaler <thaler@thaler.hu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Parts of commit b6f58a3f4aa8dba424356c7a69388a81f4459300 upstream.
Backport io_should_terminate_tw() helper to judge whether task_work
should be run or terminated.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d33c3471047fc54966621d19329e6a23ebc8ec50 upstream.
This laptop uses the ALC236 codec with COEF 0x7 and idx 1 to
control the mute LED. Enable the existing quirk for this device.
Signed-off-by: Praful Adiga <praful.adiga@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8708c5d8b3fb3f6d5d3b9e6bfe01a505819f519a upstream.
The disconnect test-case, with 'plain' TCP sockets generates spurious
errors, e.g.
07 ns1 TCP -> ns1 (dead:beef:1::1:10006) MPTCP
read: Connection reset by peer
read: Connection reset by peer
(duration 155ms) [FAIL] client exit code 3, server 3
netns ns1-FloSdv (listener) socket stat for 10006:
TcpActiveOpens 2 0.0
TcpPassiveOpens 2 0.0
TcpEstabResets 2 0.0
TcpInSegs 274 0.0
TcpOutSegs 276 0.0
TcpOutRsts 3 0.0
TcpExtPruneCalled 2 0.0
TcpExtRcvPruned 1 0.0
TcpExtTCPPureAcks 104 0.0
TcpExtTCPRcvCollapsed 2 0.0
TcpExtTCPBacklogCoalesce 42 0.0
TcpExtTCPRcvCoalesce 43 0.0
TcpExtTCPChallengeACK 1 0.0
TcpExtTCPFromZeroWindowAdv 42 0.0
TcpExtTCPToZeroWindowAdv 41 0.0
TcpExtTCPWantZeroWindowAdv 13 0.0
TcpExtTCPOrigDataSent 164 0.0
TcpExtTCPDelivered 165 0.0
TcpExtTCPRcvQDrop 1 0.0
In the failing scenarios (TCP -> MPTCP), the involved sockets are
actually plain TCP ones, as fallbacks for passive sockets at 2WHS time
cause the MPTCP listeners to actually create 'plain' TCP sockets.
Similar to commit 218cc166321f ("selftests: mptcp: avoid spurious errors
on disconnect"), the root cause is in the user-space bits: the test
program tries to disconnect as soon as all the pending data has been
spooled, generating an RST. If such option reaches the peer before the
connection has reached the closed status, the TCP socket will report an
error to the user-space, as per protocol specification, causing the
above failure. Note that it looks like this issue got more visible since
the "tcp: receiver changes" series from commit 06baf9bfa6ca ("Merge
branch 'tcp-receiver-changes'").
Address the issue by explicitly waiting for the TCP sockets (-t) to
reach a closed status before performing the disconnect. More precisely,
the test program now waits for plain TCP sockets or TCP subflows in
addition to the MPTCP sockets that were already monitored.
While at it, use 'ss' with '-n' to avoid resolving service names, which
is not needed here.
Fixes: 218cc166321f ("selftests: mptcp: avoid spurious errors on disconnect")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-3-d40e77cbbf02@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 14e22b43df25dbd4301351b882486ea38892ae4f upstream.
IO errors were correctly printed to stderr, and propagated up to the
main loop for the server side, but the returned value was ignored. As a
consequence, the program for the listener side was no longer exiting
with an error code in case of IO issues.
Because of that, some issues might not have been seen. But very likely,
most issues either had an effect on the client side, or the file
transfer was not the expected one, e.g. the connection got reset before
the end. Still, it is better to fix this.
The main consequence of this issue is the error that was reported by the
selftests: the received and sent files were different, and the MIB
counters were not printed. Also, when such errors happened during the
'disconnect' tests, the program tried to continue until the timeout.
Now when an IO error is detected, the program exits directly with an
error.
Fixes: 05be5e273c ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-2-d40e77cbbf02@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4351ca3fcb3ffecf12631b4996bf085a2dad0db6 upstream.
We need to increment i_fastreg_wrs before we bail out from
rds_ib_post_reg_frmr().
We have a fixed budget of how many FRWR operations that can be
outstanding using the dedicated QP used for memory registrations and
de-registrations. This budget is enforced by the atomic_t
i_fastreg_wrs. If we bail out early in rds_ib_post_reg_frmr(), we will
"leak" the possibility of posting an FRWR operation, and if that
accumulates, no FRWR operation can be carried out.
Fixes: 1659185fb4 ("RDS: IB: Support Fastreg MR (FRMR) memory registration mode")
Fixes: 3a2886cca7 ("net/rds: Keep track of and wait for FRWR segments in use upon shutdown")
Cc: stable@vger.kernel.org
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20250911133336.451212-1-haakon.bugge@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b6f56a44e4c1014b08859dcf04ed246500e310e5 upstream.
Since commit 7d5e9737ef ("net: rfkill: gpio: get the name and type from
device property") rfkill_find_type() gets called with the possibly
uninitialized "const char *type_name;" local variable.
On x86 systems when rfkill-gpio binds to a "BCM4752" or "LNV4752"
acpi_device, the rfkill->type is set based on the ACPI acpi_device_id:
rfkill->type = (unsigned)id->driver_data;
and there is no "type" property so device_property_read_string() will fail
and leave type_name uninitialized, leading to a potential crash.
rfkill_find_type() does accept a NULL pointer, fix the potential crash
by initializing type_name to NULL.
Note likely sofar this has not been caught because:
1. Not many x86 machines actually have a "BCM4752"/"LNV4752" acpi_device
2. The stack happened to contain NULL where type_name is stored
Fixes: 7d5e9737ef ("net: rfkill: gpio: get the name and type from device property")
Cc: stable@vger.kernel.org
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20250913113515.21698-1-hansg@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d02e48830e3fce9701265f6c5a58d9bdaf906a76 upstream.
Commit 3bbf3565f4 ("svm: Do not intercept CR8 when enable AVIC")
inhibited pre-VMRUN sync of TPR from LAPIC into VMCB::V_TPR in
sync_lapic_to_cr8() when AVIC is active.
AVIC does automatically sync between these two fields, however it does
so only on explicit guest writes to one of these fields, not on a bare
VMRUN.
This meant that when AVIC is enabled host changes to TPR in the LAPIC
state might not get automatically copied into the V_TPR field of VMCB.
This is especially true when it is the userspace setting LAPIC state via
KVM_SET_LAPIC ioctl() since userspace does not have access to the guest
VMCB.
Practice shows that it is the V_TPR that is actually used by the AVIC to
decide whether to issue pending interrupts to the CPU (not TPR in TASKPRI),
so any leftover value in V_TPR will cause serious interrupt delivery issues
in the guest when AVIC is enabled.
Fix this issue by doing pre-VMRUN TPR sync from LAPIC into VMCB::V_TPR
even when AVIC is enabled.
Fixes: 3bbf3565f4 ("svm: Do not intercept CR8 when enable AVIC")
Cc: stable@vger.kernel.org
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Naveen N Rao (AMD) <naveen@kernel.org>
Link: https://lore.kernel.org/r/c231be64280b1461e854e1ce3595d70cde3a2e9d.1756139678.git.maciej.szmigiero@oracle.com
[sean: tag for stable@]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 68f27f7c7708183e7873c585ded2f1b057ac5b97 upstream.
If earlier opening of source graph fails (e.g. ADSP rejects due to
incorrect audioreach topology), the graph is closed and
"dai_data->graph[dai->id]" is assigned NULL. Preparing the DAI for sink
graph continues though and next call to q6apm_lpass_dai_prepare()
receives dai_data->graph[dai->id]=NULL leading to NULL pointer
exception:
qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001002 cmd
qcom-apm gprsvc:service:2:1: DSP returned error[1001002] 1
q6apm-lpass-dais 30000000.remoteproc:glink-edge:gpr:service@1:bedais: fail to start APM port 78
q6apm-lpass-dais 30000000.remoteproc:glink-edge:gpr:service@1:bedais: ASoC: error at snd_soc_pcm_dai_prepare on TX_CODEC_DMA_TX_3: -22
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a8
...
Call trace:
q6apm_graph_media_format_pcm+0x48/0x120 (P)
q6apm_lpass_dai_prepare+0x110/0x1b4
snd_soc_pcm_dai_prepare+0x74/0x108
__soc_pcm_prepare+0x44/0x160
dpcm_be_dai_prepare+0x124/0x1c0
Fixes: 30ad723b93 ("ASoC: qdsp6: audioreach: add q6apm lpass dai support")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Message-ID: <20250904101849.121503-2-krzysztof.kozlowski@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 96fa515e70f3e4b98685ef8cac9d737fc62f10e1 upstream.
[BUG]
Inside check_inode_ref(), we need to make sure every structure,
including the btrfs_inode_extref header, is covered by the item. But
our code is incorrectly using "sizeof(iref)", where @iref is just a
pointer.
This means "sizeof(iref)" will always be "sizeof(void *)", which is much
smaller than "sizeof(struct btrfs_inode_extref)".
This will allow some bad inode extrefs to sneak in, defeating tree-checker.
[FIX]
Fix the typo by calling "sizeof(*iref)", which is the same as
"sizeof(struct btrfs_inode_extref)", and will be the correct behavior we
want.
Fixes: 71bf92a9b8 ("btrfs: tree-checker: Add check for INODE_REF")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dce043c07ca1ac19cfbe2844a6dc71e35c322353 upstream.
switch_to_super_page() assumes the memory range it's working on is aligned
to the target large page level. Unfortunately, __domain_mapping() doesn't
take this into account when using it, and will pass unaligned ranges
ultimately freeing a PTE range larger than expected.
Take for example a mapping with the following iov_pfn range [0x3fe400,
0x4c0600), which should be backed by the following mappings:
iov_pfn [0x3fe400, 0x3fffff] covered by 2MiB pages
iov_pfn [0x400000, 0x4bffff] covered by 1GiB pages
iov_pfn [0x4c0000, 0x4c05ff] covered by 2MiB pages
Under this circumstance, __domain_mapping() will pass [0x400000, 0x4c05ff]
to switch_to_super_page() at a 1 GiB granularity, which will in turn
free PTEs all the way to iov_pfn 0x4fffff.
Mitigate this by rounding down the iov_pfn range passed to
switch_to_super_page() in __domain_mapping()
to the target large page level.
Additionally add range alignment checks to switch_to_super_page.
Fixes: 9906b9352a ("iommu/vt-d: Avoid duplicate removing in __domain_mapping()")
Signed-off-by: Eugene Koira <eugkoira@amazon.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicolas Saenz Julienne <nsaenz@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20250826143816.38686-1-eugkoira@amazon.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 51adb03e6b865c0c6790f29659ff52d56742de2e upstream.
Add a check for the return value of kobject_create_and_add(), to ensure
that the kobj allocation succeeds for later use.
Cc: stable@vger.kernel.org
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9d13433fe17be0e867e51e71a1acd2731fbef8d upstream.
ARCH_STRICT_ALIGN is used for hardware without UAL, now it only control
the -mstrict-align flag. However, ACPI structures are packed by default
so will cause unaligned accesses.
To avoid this, define ACPI_MISALIGNMENT_NOT_SUPPORTED in asm/acenv.h to
align ACPI structures if ARCH_STRICT_ALIGN enabled.
Cc: stable@vger.kernel.org
Reported-by: Binbin Zhou <zhoubinbin@loongson.cn>
Suggested-by: Xi Ruoyao <xry111@xry111.site>
Suggested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5003098e2f337d8e8a87dc636250e3fa978d9ad upstream.
Loongson-3A6000 and 3C6000 CPUs also support unaligned memory access, so
the current description is out of date to some extent.
Actually, all of Loongson-3 series processors based on LoongArch support
unaligned memory access, this hardware capability is indicated by the bit
20 (UAL) of CPUCFG1 register, update the help info to reflect the reality.
Cc: stable@vger.kernel.org
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1e451977e1703b6db072719b37cd1b8e250b9cc9 upstream.
There are fuel gauges in the bq27xxx series (e.g. bq27z561) which may in some
cases report 0xff as the value of BQ27XXX_REG_FLAGS that should not be
interpreted as "no battery" like for a disconnected battery with some built
in bq27000 chip.
So restrict the no-battery detection originally introduced by
commit 3dd843e1c2 ("bq27000: report missing device better.")
to the bq27000.
There is no need to backport further because this was hidden before
commit f16d9fb6cf03 ("power: supply: bq27xxx: Retrieve again when busy")
Fixes: f16d9fb6cf03 ("power: supply: bq27xxx: Retrieve again when busy")
Suggested-by: Jerry Lv <Jerry.Lv@axis.com>
Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/dd979fa6855fd051ee5117016c58daaa05966e24.1755945297.git.hns@goldelico.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2c334d038466ac509468fbe06905a32d202117db upstream.
Since commit
commit f16d9fb6cf03 ("power: supply: bq27xxx: Retrieve again when busy")
the console log of some devices with hdq enabled but no bq27000 battery
(like e.g. the Pandaboard) is flooded with messages like:
[ 34.247833] power_supply bq27000-battery: driver failed to report 'status' property: -1
as soon as user-space is finding a /sys entry and trying to read the
"status" property.
It turns out that the offending commit changes the logic to now return the
value of cache.flags if it is <0. This is likely under the assumption that
it is an error number. In normal errors from bq27xxx_read() this is indeed
the case.
But there is special code to detect if no bq27000 is installed or accessible
through hdq/1wire and wants to report this. In that case, the cache.flags
are set historically by
commit 3dd843e1c2 ("bq27000: report missing device better.")
to constant -1 which did make reading properties return -ENODEV. So everything
appeared to be fine before the return value was passed upwards.
Now the -1 is returned as -EPERM instead of -ENODEV, triggering the error
condition in power_supply_format_property() which then floods the console log.
So we change the detection of missing bq27000 battery to simply set
cache.flags = -ENODEV
instead of -1.
Fixes: f16d9fb6cf03 ("power: supply: bq27xxx: Retrieve again when busy")
Cc: Jerry Lv <Jerry.Lv@axis.com>
Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/692f79eb6fd541adb397038ea6e750d4de2deddf.1755945297.git.hns@goldelico.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b34cbbf4f011a121ef7b2d7d6e6920a036d5285 upstream.
Issuing two writes to the same af_alg socket is bogus as the
data will be interleaved in an unpredictable fashion. Furthermore,
concurrent writes may create inconsistencies in the internal
socket state.
Disallow this by adding a new ctx->write field that indiciates
exclusive ownership for writing.
Fixes: 8ff590903d ("crypto: algif_skcipher - User-space interface for skcipher operations")
Reported-by: Muhammad Alifa Ramdhan <ramdhan@starlabs.sg>
Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 025e87f8ea2ae3a28bf1fe2b052bfa412c27ed4a upstream.
When accessing one of the files under /sys/fs/nilfs2/features when
CONFIG_CFI_CLANG is enabled, there is a CFI violation:
CFI failure at kobj_attr_show+0x59/0x80 (target: nilfs_feature_revision_show+0x0/0x30; expected type: 0xfc392c4d)
...
Call Trace:
<TASK>
sysfs_kf_seq_show+0x2a6/0x390
? __cfi_kobj_attr_show+0x10/0x10
kernfs_seq_show+0x104/0x15b
seq_read_iter+0x580/0xe2b
...
When the kobject of the kset for /sys/fs/nilfs2 is initialized, its ktype
is set to kset_ktype, which has a ->sysfs_ops of kobj_sysfs_ops. When
nilfs_feature_attr_group is added to that kobject via
sysfs_create_group(), the kernfs_ops of each files is sysfs_file_kfops_rw,
which will call sysfs_kf_seq_show() when ->seq_show() is called.
sysfs_kf_seq_show() in turn calls kobj_attr_show() through
->sysfs_ops->show(). kobj_attr_show() casts the provided attribute out to
a 'struct kobj_attribute' via container_of() and calls ->show(), resulting
in the CFI violation since neither nilfs_feature_revision_show() nor
nilfs_feature_README_show() match the prototype of ->show() in 'struct
kobj_attribute'.
Resolve the CFI violation by adjusting the second parameter in
nilfs_feature_{revision,README}_show() from 'struct attribute' to 'struct
kobj_attribute' to match the expected prototype.
Link: https://lkml.kernel.org/r/20250906144410.22511-1-konishi.ryusuke@gmail.com
Fixes: aebe17f684 ("nilfs2: add /sys/fs/nilfs2/features group")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202509021646.bc78d9ef-lkp@intel.com/
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5282491fc49d5614ac6ddcd012e5743eecb6a67c upstream.
If data_offset and data_length of smb_direct_data_transfer struct are
invalid, out of bounds issue could happen.
This patch validate data_offset and data_length field in recv_done.
Cc: stable@vger.kernel.org
Fixes: 2ea086e35c ("ksmbd: add buffer validation for smb direct")
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Reported-by: Luigino Camastra, Aisle Research <luigino.camastra@aisle.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f8b4687151021db61841af983f1cb7be6915d4ef ]
The original code relies on cancel_delayed_work() in otx2_ptp_destroy(),
which does not ensure that the delayed work item synctstamp_work has fully
completed if it was already running. This leads to use-after-free scenarios
where otx2_ptp is deallocated by otx2_ptp_destroy(), while synctstamp_work
remains active and attempts to dereference otx2_ptp in otx2_sync_tstamp().
Furthermore, the synctstamp_work is cyclic, the likelihood of triggering
the bug is nonnegligible.
A typical race condition is illustrated below:
CPU 0 (cleanup) | CPU 1 (delayed work callback)
otx2_remove() |
otx2_ptp_destroy() | otx2_sync_tstamp()
cancel_delayed_work() |
kfree(ptp) |
| ptp = container_of(...); //UAF
| ptp-> //UAF
This is confirmed by a KASAN report:
BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0
Write of size 8 at addr ffff88800aa09a18 by task bash/136
...
Call Trace:
<IRQ>
dump_stack_lvl+0x55/0x70
print_report+0xcf/0x610
? __run_timer_base.part.0+0x7d7/0x8c0
kasan_report+0xb8/0xf0
? __run_timer_base.part.0+0x7d7/0x8c0
__run_timer_base.part.0+0x7d7/0x8c0
? __pfx___run_timer_base.part.0+0x10/0x10
? __pfx_read_tsc+0x10/0x10
? ktime_get+0x60/0x140
? lapic_next_event+0x11/0x20
? clockevents_program_event+0x1d4/0x2a0
run_timer_softirq+0xd1/0x190
handle_softirqs+0x16a/0x550
irq_exit_rcu+0xaf/0xe0
sysvec_apic_timer_interrupt+0x70/0x80
</IRQ>
...
Allocated by task 1:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x7f/0x90
otx2_ptp_init+0xb1/0x860
otx2_probe+0x4eb/0xc30
local_pci_probe+0xdc/0x190
pci_device_probe+0x2fe/0x470
really_probe+0x1ca/0x5c0
__driver_probe_device+0x248/0x310
driver_probe_device+0x44/0x120
__driver_attach+0xd2/0x310
bus_for_each_dev+0xed/0x170
bus_add_driver+0x208/0x500
driver_register+0x132/0x460
do_one_initcall+0x89/0x300
kernel_init_freeable+0x40d/0x720
kernel_init+0x1a/0x150
ret_from_fork+0x10c/0x1a0
ret_from_fork_asm+0x1a/0x30
Freed by task 136:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3a/0x60
__kasan_slab_free+0x3f/0x50
kfree+0x137/0x370
otx2_ptp_destroy+0x38/0x80
otx2_remove+0x10d/0x4c0
pci_device_remove+0xa6/0x1d0
device_release_driver_internal+0xf8/0x210
pci_stop_bus_device+0x105/0x150
pci_stop_and_remove_bus_device_locked+0x15/0x30
remove_store+0xcc/0xe0
kernfs_fop_write_iter+0x2c3/0x440
vfs_write+0x871/0xd70
ksys_write+0xee/0x1c0
do_syscall_64+0xac/0x280
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the delayed work item is properly canceled before the otx2_ptp is
deallocated.
This bug was initially identified through static analysis. To reproduce
and test it, I simulated the OcteonTX2 PCI device in QEMU and introduced
artificial delays within the otx2_sync_tstamp() function to increase the
likelihood of triggering the bug.
Fixes: 2958d17a89 ("octeontx2-pf: Add support for ptp 1-step mode on CN10K silicon")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfa7d9b1e3a8604afc84e9e51d789c29574fb216 ]
The original code uses cancel_delayed_work() in cnic_cm_stop_bnx2x_hw(),
which does not guarantee that the delayed work item 'delete_task' has
fully completed if it was already running. Additionally, the delayed work
item is cyclic, the flush_workqueue() in cnic_cm_stop_bnx2x_hw() only
blocks and waits for work items that were already queued to the
workqueue prior to its invocation. Any work items submitted after
flush_workqueue() is called are not included in the set of tasks that the
flush operation awaits. This means that after the cyclic work items have
finished executing, a delayed work item may still exist in the workqueue.
This leads to use-after-free scenarios where the cnic_dev is deallocated
by cnic_free_dev(), while delete_task remains active and attempt to
dereference cnic_dev in cnic_delete_task().
A typical race condition is illustrated below:
CPU 0 (cleanup) | CPU 1 (delayed work callback)
cnic_netdev_event() |
cnic_stop_hw() | cnic_delete_task()
cnic_cm_stop_bnx2x_hw() | ...
cancel_delayed_work() | /* the queue_delayed_work()
flush_workqueue() | executes after flush_workqueue()*/
| queue_delayed_work()
cnic_free_dev(dev)//free | cnic_delete_task() //new instance
| dev = cp->dev; //use
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the cyclic delayed work item is properly canceled and that any
ongoing execution of the work item completes before the cnic_dev is
deallocated. Furthermore, since cancel_delayed_work_sync() uses
__flush_work(work, true) to synchronously wait for any currently
executing instance of the work item to finish, the flush_workqueue()
becomes redundant and should be removed.
This bug was identified through static analysis. To reproduce the issue
and validate the fix, I simulated the cnic PCI device in QEMU and
introduced intentional delays — such as inserting calls to ssleep()
within the cnic_delete_task() function — to increase the likelihood
of triggering the bug.
Fixes: fdf24086f4 ("cnic: Defer iscsi connection cleanup")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cca7b1cfd7b8a0eff2a3510c5e0f10efe8fa3758 ]
The expression `(conf->instr_type == 64) << iq_no` can overflow because
`iq_no` may be as high as 64 (`CN23XX_MAX_RINGS_PER_PF`). Casting the
operand to `u64` ensures correct 64-bit arithmetic.
Fixes: f21fb3ed36 ("Add support of Cavium Liquidio ethernet adapters")
Signed-off-by: Alexey Nepomnyashih <sdl@nppct.ru>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3fbfe251cc9f6d391944282cdb9bcf0bd02e01f8 ]
This reverts commit d24341740fe48add8a227a753e68b6eedf4b385a.
It causes errors when trying to configure QoS, as well as
loss of L2 connectivity (on multi-host devices).
Reported-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/20250910170011.70528106@kernel.org
Fixes: d24341740fe4 ("net/mlx5e: Update and set Xon/Xoff upon port speed set")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0aeb54ac4cd5cf8f60131b4d9ec0b6dc9c27b20d ]
Normally we wait for the socket to buffer up the whole record
before we service it. If the socket has a tiny buffer, however,
we read out the data sooner, to prevent connection stalls.
Make sure that we abort the connection when we find out late
that the record is actually invalid. Retrying the parsing is
fine in itself but since we copy some more data each time
before we parse we can overflow the allocated skb space.
Constructing a scenario in which we're under pressure without
enough data in the socket to parse the length upfront is quite
hard. syzbot figured out a way to do this by serving us the header
in small OOB sends, and then filling in the recvbuf with a large
normal send.
Make sure that tls_rx_msg_size() aborts strp, if we reach
an invalid record there's really no way to recover.
Reported-by: Lee Jones <lee@kernel.org>
Fixes: 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250917002814.1743558-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8ba87f04ca9cdec06776ce92dce1395026dc3bb ]
Unlike IPv4, IPv6 routing strictly requires the source address to be valid
on the outgoing interface. If the NS target is set to a remote VLAN interface,
and the source address is also configured on a VLAN over a bond interface,
setting the oif to the bond device will fail to retrieve the correct
destination route.
Fix this by not setting the oif to the bond device when retrieving the NS
target destination. This allows the correct destination device (the VLAN
interface) to be determined, so that bond_verify_device_path can return the
proper VLAN tags for sending NS messages.
Reported-by: David Wilder <wilder@us.ibm.com>
Closes: https://lore.kernel.org/netdev/aGOKggdfjv0cApTO@fedora/
Suggested-by: Jay Vosburgh <jv@jvosburgh.net>
Tested-by: David Wilder <wilder@us.ibm.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Fixes: 4e24be018e ("bonding: add new parameter ns_targets")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250916080127.430626-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b4be64fd9fec16418f365c2d8e47a7566e9eba5 ]
The function mlx5_uplink_netdev_get() gets the uplink netdevice
pointer from mdev->mlx5e_res.uplink_netdev. However, the netdevice can
be removed and its pointer cleared when unbound from the mlx5_core.eth
driver. This results in a NULL pointer, causing a kernel panic.
BUG: unable to handle page fault for address: 0000000000001300
at RIP: 0010:mlx5e_vport_rep_load+0x22a/0x270 [mlx5_core]
Call Trace:
<TASK>
mlx5_esw_offloads_rep_load+0x68/0xe0 [mlx5_core]
esw_offloads_enable+0x593/0x910 [mlx5_core]
mlx5_eswitch_enable_locked+0x341/0x420 [mlx5_core]
mlx5_devlink_eswitch_mode_set+0x17e/0x3a0 [mlx5_core]
devlink_nl_eswitch_set_doit+0x60/0xd0
genl_family_rcv_msg_doit+0xe0/0x130
genl_rcv_msg+0x183/0x290
netlink_rcv_skb+0x4b/0xf0
genl_rcv+0x24/0x40
netlink_unicast+0x255/0x380
netlink_sendmsg+0x1f3/0x420
__sock_sendmsg+0x38/0x60
__sys_sendto+0x119/0x180
do_syscall_64+0x53/0x1d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Ensure the pointer is valid before use by checking it for NULL. If it
is valid, immediately call netdev_hold() to take a reference, and
preventing the netdevice from being freed while it is in use.
Fixes: 7a9fb35e8c ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1757939074-617281-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d88e198dcaf700e33c2a4c796af9434652c56e7 ]
When LAG is configured, functions (PF,VF,SF) can utilize the maximum
aggregated link speed for transmission. Currently the aggregated link
speed is not considered.
Hence, improve it to use the aggregated link speed by referring to the
physical port's upper bonding device when LAG is configured.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Stable-dep-of: 6b4be64fd9fe ("net/mlx5e: Harden uplink netdev access against device unbind")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e37084a26070c546ae7961ee135bbfb15fbe13fd ]
i40e has a feature which writes to memory location last descriptor
successfully sent. Memory barrier in i40e_clean_tx_irq() was used to
avoid forward-reading descriptor fields in case DD bit was not set.
Having mentioned feature in place implies that such situation will not
happen as we know in advance how many descriptors HW has dealt with.
Besides, this barrier placement was wrong. Idea is to have this
protection *after* reading DD bit from HW descriptor, not before.
Digging through git history showed me that indeed barrier was before DD
bit check, anyways the commit introducing i40e_get_head() should have
wiped it out altogether.
Also, there was one commit doing s/read_barrier_depends/smp_rmb when get
head feature was already in place, but it was only theoretical based on
ixgbe experiences, which is different in these terms as that driver has
to read DD bit from HW descriptor.
Fixes: 1943d8ba95 ("i40e/i40evf: enable hardware feature head write back")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
