[ Upstream commit 24b7ba2f88 ]
When opts->pnp_string is changed with configfs, new memory is allocated for
the string. It does not, however, update dev->pnp_string, even though the
memory is freed. When rquesting the string, the host then gets old or
corrupted data rather than the new string. The ieee 1284 id string should
be allowed to change while the device is connected.
The bug was introduced in commit fdc01cc286 ("usb: gadget: printer:
Remove pnp_string static buffer"), which changed opts->pnp_string from a
char[] to a char*.
This patch changes dev->pnp_string from a char* to a char** pointing to
opts->pnp_string.
Fixes: fdc01cc286 ("usb: gadget: printer: Remove pnp_string static buffer")
Signed-off-by: Albert Briscoe <albertsbriscoe@gmail.com>
Link: https://lore.kernel.org/r/20220911223753.20417-1-albertsbriscoe@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2eed85bc7 ]
When doing degrade/recover tests using the journal a kernel BUG
is hit at drivers/md/raid5.c:4381 in handle_parity_checks5():
BUG_ON(!test_bit(R5_UPTODATE, &dev->flags));
This was found to occur because handle_stripe_fill() was skipped
for stripes in the journal due to a condition in that function.
Thus blocks were not fetched and R5_UPTODATE was not set when
the code reached handle_parity_checks5().
To fix this, don't skip handle_stripe_fill() unless the stripe is
for read.
Fixes: 07e8336484 ("md/r5cache: shift complex rmw from read path to write path")
Link: https://lore.kernel.org/linux-raid/e05c4239-41a9-d2f7-3cfa-4aa9d2cea8c1@deltatee.com/
Suggested-by: Song Liu <song@kernel.org>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 630624cb1b ]
ACS-5 section
7.13.6.36 Word 78: Serial ATA features supported
states that:
If word 76 is not 0000h or FFFFh, word 78 reports the features supported
by the device. If this word is not supported, the word shall be cleared
to zero.
(This text also exists in really old ACS standards, e.g. ACS-3.)
The problem with ata_id_has_dipm() is that the while it performs a
check against 0 and 0xffff, it performs the check against
ATA_ID_FEATURE_SUPP (word 78), the same word where the feature bit
is stored.
Fix this by performing the check against ATA_ID_SATA_CAPABILITY
(word 76), like required by the spec. The feature bit check itself
is of course still performed against ATA_ID_FEATURE_SUPP (word 78).
Additionally, move the macro to the other ATA_ID_FEATURE_SUPP macros
(which already have this check), thus making it more likely that the
next ATA_ID_FEATURE_SUPP macro that is added will include this check.
Fixes: ca77329fb7 ("[libata] Link power management infrastructure")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5fb6bf853 ]
ACS-5 section
7.13.6.36 Word 78: Serial ATA features supported
states that:
If word 76 is not 0000h or FFFFh, word 78 reports the features supported
by the device. If this word is not supported, the word shall be cleared
to zero.
(This text also exists in really old ACS standards, e.g. ACS-3.)
Additionally, move the macro to the other ATA_ID_FEATURE_SUPP macros
(which already have this check), thus making it more likely that the
next ATA_ID_FEATURE_SUPP macro that is added will include this check.
Fixes: 5b01e4b9ef ("libata: Implement NCQ autosense")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c6e09a434 ]
ACS-5 section
7.13.6.36 Word 78: Serial ATA features supported
states that:
If word 76 is not 0000h or FFFFh, word 78 reports the features supported
by the device. If this word is not supported, the word shall be cleared
to zero.
(This text also exists in really old ACS standards, e.g. ACS-3.)
Additionally, move the macro to the other ATA_ID_FEATURE_SUPP macros
(which already have this check), thus making it more likely that the
next ATA_ID_FEATURE_SUPP macro that is added will include this check.
Fixes: 65fe1f0f66 ("ahci: implement aggressive SATA device sleep support")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 690aa8c3ae ]
ACS-5 section
7.13.6.41 Words 85..87, 120: Commands and feature sets supported or enabled
states that:
If bit 15 of word 86 is set to one, bit 14 of word 119 is set to one,
and bit 15 of word 119 is cleared to zero, then word 119 is valid.
If bit 15 of word 86 is set to one, bit 14 of word 120 is set to one,
and bit 15 of word 120 is cleared to zero, then word 120 is valid.
(This text also exists in really old ACS standards, e.g. ACS-3.)
Currently, ata_id_sense_reporting_enabled() and
ata_id_has_sense_reporting() both check bit 15 of word 86,
but neither of them check that bit 14 of word 119 is set to one,
or that bit 15 of word 119 is cleared to zero.
Additionally, make ata_id_sense_reporting_enabled() return false
if !ata_id_has_sense_reporting(), similar to how e.g.
ata_id_flush_ext_enabled() returns false if !ata_id_has_flush_ext().
Fixes: e87fd28cf9 ("libata: Implement support for sense data reporting")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 754209850d ]
For header and trailer/padding processing, siw did not consume new
skb data until minimum amount present to fill current header or trailer
structure, including potential payload padding. Not consuming any
data during upcall may cause a receive stall, since tcp_read_sock()
is not upcalling again if no new data arrive.
A NFSoRDMA client got stuck at RDMA Write reception of unaligned
payload, if the current skb did contain only the expected 3 padding
bytes, but not the 4 bytes CRC trailer. Expecting 4 more bytes already
arrived in another skb, and not consuming those 3 bytes in the current
upcall left the Write incomplete, waiting for the CRC forever.
Fixes: 8b6a361b8c ("rdma/siw: receive path")
Reported-by: Olga Kornievskaia <kolga@netapp.com>
Tested-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20220920081202.223629-1-bmt@zurich.ibm.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 049e43b9fd ]
Commit f6424c22aa ("mtd: rawnand: fsl_elbc: Make SW ECC work") added
support for specifying ECC mode via DTS and skipping autodetection.
But it broke explicit specification of HW ECC mode in DTS as correct
settings for HW ECC mode are applied only when NONE mode or nothing was
specified in DTS file.
Also it started aliasing NONE mode to be same as when ECC mode was not
specified and disallowed usage of ON_DIE mode.
Fix all these issues. Use autodetection of ECC mode only in case when mode
was really not specified in DTS file by checking that ecc value is invalid.
Set HW ECC settings either when HW ECC was specified in DTS or it was
autodetected. And do not fail when ON_DIE mode is set.
Fixes: f6424c22aa ("mtd: rawnand: fsl_elbc: Make SW ECC work")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220707184328.3845-1-pali@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e75ef56f74 ]
dyndbg's control-parser: ddebug_parse_query(), requires that search
terms: module, func, file, lineno, are used only once in a query; a
thing cannot be named both foo and bar.
The cited commit added an overriding module modname, taken from the
module loader, which is authoritative. So it set query.module 1st,
which disallowed its use in the query-string.
But now, its useful to allow a module-load to enable classes across a
whole (or part of) a subsystem at once.
# enable (dynamic-debug in) drm only
modprobe drm dyndbg="class DRM_UT_CORE +p"
# get drm_helper too
modprobe drm dyndbg="class DRM_UT_CORE module drm* +p"
# get everything that knows DRM_UT_CORE
modprobe drm dyndbg="class DRM_UT_CORE module * +p"
# also for boot-args:
drm.dyndbg="class DRM_UT_CORE module * +p"
So convert the override into a default, by filling it only when/after
the query-string omitted the module.
NB: the query class FOO handling is forthcoming.
Fixes: 8e59b5cfb9 dynamic_debug: add modname arg to exec_query callchain
Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-8-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85d6b66d31 ]
For CONFIG_DYNAMIC_DEBUG=N, the ddebug_dyndbg_module_param_cb()
stub-fn is too permissive:
bash-5.1# modprobe drm JUNKdyndbg
bash-5.1# modprobe drm dyndbgJUNK
[ 42.933220] dyndbg param is supported only in CONFIG_DYNAMIC_DEBUG builds
[ 42.937484] ACPI: bus type drm_connector registered
This caused no ill effects, because unknown parameters are either
ignored by default with an "unknown parameter" warning, or ignored
because dyndbg allows its no-effect use on non-dyndbg builds.
But since the code has an explicit feedback message, it should be
issued accurately. Fix with strcmp for exact param-name match.
Fixes: b48420c1d3 dynamic_debug: make dynamic-debug work for module initialization
Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-3-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee879be38b ]
In https://lore.kernel.org/lkml/20211209150910.GA23668@axis.com/
Vincent's patch commented on, and worked around, a bug toggling
static_branch's, when a 2nd PRINTK-ish flag was added. The bug
results in a premature static_branch_disable when the 1st of 2 flags
was disabled.
The cited commit computed newflags, but then in the JUMP_LABEL block,
failed to use that result, instead using just one of the terms in it.
Using newflags instead made the code work properly.
This is Vincents test-case, reduced. It needs the 2nd flag to
demonstrate the bug, but it's explanatory here.
pt_test() {
echo 5 > /sys/module/dynamic_debug/verbose
site="module tcp" # just one callsite
echo " $site =_ " > /proc/dynamic_debug/control # clear it
# A B ~A ~B
for flg in +T +p "-T #broke here" -p; do
echo " $site $flg " > /proc/dynamic_debug/control
done;
# A B ~B ~A
for flg in +T +p "-p #broke here" -T; do
echo " $site $flg " > /proc/dynamic_debug/control
done
}
pt_test
Fixes: 84da83a6ff dyndbg: combine flags & mask into a struct, simplify with it
CC: vincent.whitchurch@axis.com
Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-2-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2cbb95883c ]
When we get a DMA channel and try to use it in multiple threads it
will cause oops and hanging the system.
% echo 100 > /sys/module/dmatest/parameters/threads_per_chan
% echo 100 > /sys/module/dmatest/parameters/iterations
% echo 1 > /sys/module/dmatest/parameters/run
[383493.327077] Unable to handle kernel paging request at virtual
address dead000000000108
[383493.335103] Mem abort info:
[383493.335103] ESR = 0x96000044
[383493.335105] EC = 0x25: DABT (current EL), IL = 32 bits
[383493.335107] SET = 0, FnV = 0
[383493.335108] EA = 0, S1PTW = 0
[383493.335109] FSC = 0x04: level 0 translation fault
[383493.335110] Data abort info:
[383493.335111] ISV = 0, ISS = 0x00000044
[383493.364739] CM = 0, WnR = 1
[383493.367793] [dead000000000108] address between user and kernel
address ranges
[383493.375021] Internal error: Oops: 96000044 [#1] PREEMPT SMP
[383493.437574] CPU: 63 PID: 27895 Comm: dma0chan0-copy2 Kdump:
loaded Tainted: GO 5.17.0-rc4+ #2
[383493.457851] pstate: 204000c9 (nzCv daIF +PAN -UAO -TCO -DIT
-SSBS BTYPE=--)
[383493.465331] pc : vchan_tx_submit+0x64/0xa0
[383493.469957] lr : vchan_tx_submit+0x34/0xa0
This occurs because the transmission timed out, and that's due
to data race. Each thread rewrite channels's descriptor as soon as
device_issue_pending is called. It leads to the situation that
the driver thinks that it uses the right descriptor in interrupt
handler while channels's descriptor has been changed by other
thread. The descriptor which in fact reported interrupt will not
be handled any more, as well as its tx->callback.
That's why timeout reports.
With current fixes channels' descriptor changes it's value only
when it has been used. A new descriptor is acquired from
vc->desc_issued queue that is already filled with descriptors
that are ready to be sent. Threads have no direct access to DMA
channel descriptor. In case of channel's descriptor is busy, try
to submit to HW again when a descriptor is completed. In this case,
vc->desc_issued may be empty when hisi_dma_start_transfer is called,
so delete error reporting on this. Now it is just possible to queue
a descriptor for further processing.
Fixes: e9f08b6525 ("dmaengine: hisilicon: Add Kunpeng DMA engine support")
Signed-off-by: Jie Hai <haijie1@huawei.com>
Acked-by: Zhou Wang <wangzhou1@hisilicon.com>
Link: https://lore.kernel.org/r/20220830062251.52993-4-haijie1@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94477a79cf ]
After completion of data transfer of one or multiple descriptors,
the completion status and the current head pointer to submission
queue are written into the CQ and interrupt can be generated to
inform the software. In interrupt process CQ is read and cq_head
is updated.
hisi_dma_irq updates cq_head only when the completion status is
success. When an abnormal interrupt reports, cq_head will not update
which will cause subsequent interrupt processes read the error CQ
and never report the correct status.
This patch updates cq_head whenever CQ is accessed.
Fixes: e9f08b6525 ("dmaengine: hisilicon: Add Kunpeng DMA engine support")
Signed-off-by: Jie Hai <haijie1@huawei.com>
Acked-by: Zhou Wang <wangzhou1@hisilicon.com>
Link: https://lore.kernel.org/r/20220830062251.52993-3-haijie1@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c78f19c3a ]
of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: df3305156f ("[media] v4l: xilinx: Add Xilinx Video IP core")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 211f8304fa ]
In fimc_is_register_subdevs(), we need to call of_node_put() for
the reference 'i2c_bus' when breaking out of the
for_each_compatible_node() which has increased the refcount.
Fixes: 9a761e4368 ("[media] exynos4-is: Add Exynos4x12 FIMC-IS driver")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a2ea132df ]
When returning or breaking early from a
for_each_available_child_of_node() loop, we need to explicitly call
of_node_put() on the child node to possibly release the node.
Fixes: b209e047bc ("HSI: Introduce OMAP SSI driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37c381b812 ]
In berlin2_clock_setup() and berlin2q_clock_setup(), we need to
call of_node_put() for the reference returned by of_get_parent()
which has increased the refcount. We should call *_put() in fail
path or when it is not used anymore.
Fixes: 26b3b6b959 ("clk: berlin: prepare simple-mfd conversion")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220708084900.311684-1-windhl@126.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8ea4273bc ]
In legacy_init_clockgen(), we need to hold the reference returned
by of_get_parent() and use it to call of_node_put() for refcount
balance.
Beside, in create_sysclk(), we need to call of_node_put() on 'sysclk'
also for refcount balance.
Fixes: 0dfc86b317 ("clk: qoriq: Move chip-specific knowledge into driver")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220628143851.171299-1-windhl@126.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52c2d15703 ]
The USB "maximum-speed" property can now take the SSP signaling rate
generation and lane count with these new strings:
"super-speed-plus-gen2x2"
"super-speed-plus-gen2x1"
"super-speed-plus-gen1x2"
Introduce usb_get_maximum_ssp_rate() to parse for the corresponding
usb_ssp_rate enum. The original usb_get_maximum_speed() will return
USB_SPEED_SUPER_PLUS if it matches one of these new strings.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/f8ed896313d8cd8e2d2b540fc82db92b3ddf8a47.1611106162.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: b6155eaf6b ("usb: common: debug: Check non-standard control requests")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79c3e84874 ]
'of_node_put()' can potentially release the memory pointed to by
'iiospec.np' which would leave us with an invalid pointer (and we would
still pass it in 'of_xlate()'). Note that it is not guaranteed for the
of_node lifespan to be attached to the device (to which is attached)
lifespan so that there is (even though very unlikely) the possibility
for the node to be freed while the device is still around. Thus, as there
are indeed some of_xlate users which do access the node, a race is indeed
possible.
As such, we can only release the node after we are done with it.
Fixes: 17d82b47a2 ("iio: Add OF support")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220715122903.332535-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 808175e21d ]
In case triggered buffers are enabled while system is suspended they will
not work anymore after resume. For this call at91_adc_buffer_postdisable()
on suspend and at91_adc_buffer_prepare() on resume. On tests it has been
seen that at91_adc_buffer_postdisable() call is not necessary but it has
been kept because it also does the book keeping for DMA. On resume path
there is no need to call at91_adc_configure_touch() as it is embedded in
at91_adc_buffer_prepare().
Fixes: 073c662017 ("iio: adc: at91-sama5d2_adc: add support for DMA")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220803102855.2191070-5-claudiu.beznea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9780a23ed5 ]
.read_raw()/.write_raw() could be called asynchronously from user space
or other in kernel drivers. Without locking on st->lock these could be
called asynchronously while there is a conversion in progress. Read will
be harmless but changing registers while conversion is in progress may
lead to inconsistent results. Thus, to avoid this lock st->lock.
Fixes: 27e1771908 ("iio:adc:at91_adc8xx: introduce new atmel adc driver")
Fixes: 6794e23fa3 ("iio: adc: at91-sama5d2_adc: add support for oversampling resolution")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220803102855.2191070-4-claudiu.beznea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
