PD#SWPL-12300
Problem:
gc2145 mipi camera take picture will stuck when recording
Solution:
add the right size to picture array
Verify:
verify on S905D3
Change-Id: Iee797d59053050d41448fda601a3bd7226cf9f37
Signed-off-by: Guosong Zhou <guosong.zhou@amlogic.com>
PD#IPTV-3732
Problem:
TMDOUTA is gated by earc clk gate.
There is a bug in sm1 clk gating.
Solution:
Fix the wrong map of clk mapping.
Verify:
SM1.
Change-Id: Ia395d3307c249ef0cd64b715bb936dea3e2925ac
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#SWPL-11390
Problem:
No 227/228/229/230 fail
Solution:
1.Set video priotiry, to prevent num_ext_blocks is set to 0
2.Turn off osd, to make gmax=gmin=0
3.Update md_tool.exe to version 0.4.1
4.Add padding data 0 to 512 bytes for metadata
By the way, fix some coverity check error
Verify:
sm1
Change-Id: I316e33bac3d84bb3bd7763031c28b33cfe7762ac
Signed-off-by: yao liu <yao.liu@amlogic.com>
PD#SWPL-10382
Problem:
not into pulldown 22 timely
Solution:
The judgment condition is wider for pulldown 22
Verify:
sm1
Change-Id: Id99c0c997b0954dee0a06b7e6dfd60feded73b30
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
PD#SWPL-10831
Problem:
sawtooth in the lower patr of AV video
Solution:
adjust motion num condition
Verify:
marconi
Change-Id: Id42f1cb2d3f702e04cd640dbc99c4f7a97447faf
Signed-off-by: Wenfeng Guo <wenfeng.guo@amlogic.com>
PD#SWPL-11550
Problem:
force_prog only for progressive.
Solution:
add condition for force_prog
Verify:
TL1
Change-Id: I44e165c779eefcefcc18a286e66a598ffef1294f
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#SWPL-11884
Problem:
camera preview would cause garbage.
Solution:
modify the previous change:38e45fb998269d36f41a7b004be51ba9f1e7bef9
not to remove vdin0_cma_reserved.
Verify:
test passed on sm1
Change-Id: Ie20de9b3562f7c83fa73bd88acab7770ca8c3b0a
Signed-off-by: changqing.gao <changqing.gao@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#SWPL-10719
Problem:
hs400 200M not stable on sm1
Solution:
run hs400 166M busmod
Verify:
passed on sm1_ac200
Change-Id: I5e5f4db821e8360fdd3ccd6ce24df83446073cf2
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
emmc: run hs400 166M busmode on sm1 [1/1]
PD#SWPL-10719
Problem:
right now the sm1 is run hs200 200M
Solution:
modify dts
Verify:
passed on sm1_ac200
Change-Id: I01c36c04293698b36cec116302cb104b22500d99
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#SWPL-10095
Problem:
command delay may too close to the command edge
Solution:
rescan cmd delay windows and find cmd delay value
after data alignment
Verify:
passed on g12b
Change-Id: I258e93aa87e35c843c45f62c58af3609bebe0901
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
PD#TV-7920
Problem:
Audio drive caused kernel panic.
BUG_ON timer_pending.
Solution:
Add timer will panic calling add_timer.
If timer is pending we need use mod_timer
to deal with this case.
Verify:
T962
Change-Id: Ib4143de384af40803609c3513ad07eeb3fe59bbf
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#SWPL-10391
Problem:
g12b revA and revB need one code for two parameter
Solution:
if autocali in uboot, use autocali result
if no autocali,use the dts para
Verify:
verify on g12b w400 board,revA and revB
Change-Id: I4b48c67fba25eba4cb286470557ff0777009ec9f
Signed-off-by: qi duan <qi.duan@amlogic.com>
PD#SWPL-11559
Problem:
it will hangup when reboot
Solution:
fix cpub clock parent name error
Verify:
test passed on g12b
Change-Id: I7c2732420d6040d8cb778c104f71f4397a1bb03a
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
PD#SWPL-8255
Problem:
Multi-screen support.
Solution:
Display is abnormal with flower screen.
Verify:
1. Primary screen display with HDMI.
2. Extend screen display with panel.
3. Primary and extend screen can display the same UI or difference.
Change-Id: Icec55f65147823bb7f06641b5c296ea02c7838c7
Signed-off-by: kaishuang <kaishuang.zhang@amlogic.com>
dts: Set cvbs clk path to 2 with dual display. [4/5]
Problem:
Multi-screen support.
Solution:
Display is blank when panel use the same clk with cvbs.
Verify:
1. Primary screen display with HDMI.
2. Extend screen display with panel.
3. Primary and extend screen can display the same UI or difference.
Change-Id: I9430b9389bd3c0945774ff60dc123a22281db0e9
Signed-off-by: kaishuang <kaishuang.zhang@amlogic.com>
PD#SWPL-11208
Problem:
system would auto reboot because of low free memory(Unmovable type)
Solution:
reduce the CMA reserved memory.
1.reduce ion_cma_reserved from 128MB to 48MB.(DDR size == 1G)
2.remove vdin0_cma_reserved which is not used for sm1.
Verify:
test passed on sm1
Change-Id: Ifdb31bd3451ad984305c5f08ba3b1be478c02cf4
Signed-off-by: changqing.gao <changqing.gao@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#SWPL-10149
Problem:
random crash when stress test
Solution:
1. delete recycle keep buff when bypass;
2. adjusting judgment timing about pre_de_buf_config;
Verify:
TL1
Change-Id: I7b0716ce35234d2342cdc13fcf0d51211f579d13
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#SWPL-10033
Problem:
it will hangup when play video
Solution:
using the origin clk-mux ops to register cpu clock
Verify:
test passed on sm1
Change-Id: I1a21eb28d8af3d68a70c89c37fff857fb416c9a8
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
PD#SWPL-11212
Problem:
The physical keys are not working
Solution:
add gpio keypad in u202
Verify:
Verify by Android P u202
Change-Id: I0c97d2ffd7f8712b4584c81b1b9007f45755ec7c
Signed-off-by: GongWei Chen <gongwei.chen@amlogic.com>
PD#SWPL-7932
Problem:
sm1 play hdr video, color abnormal
Solution:
cgain coef1 set according to bitdepth
Verify:
verify on sm1
Change-Id: Ibef6e127dde57d47f9b9ec7a4233ee10fe8539d5
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
PD#SWPL-10487
Problem:
1.tb39 new case 5008, dm version is 3,
core3 raw_metadata overflow
2.core3 raw_metadata 207 overwrite core3 clkgate_ctrl
and core3 swap_ctrl0 andsawp_ctrl1 reg.
Solution:
1.Increase raw_metadata size to 512
2.Force dv_mode to DOLBY_VISION_OUTPUT_MODE_IPT, output
ipt444 12bit for 5008.
3.Dont set core3 metadata reg when scramble disabled or
metedata size > 204
Verify:
verified on sm1
Change-Id: I459736eb42eb14fe3fe0dc054eb6693c88967741
Signed-off-by: yao liu <yao.liu@amlogic.com>
PD#SWPL-11051
Problem:
Abnormal display of red subtitles
Solution:
process prog 420 as 422
Verify:
tl1
Change-Id: I46e0af178d6d87fc3a815f70c5a84d0f80772b6c
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#TV-7161
Problem:
dead lock between flush work and ipa
Solution:
fix dead lock between flush work and ipa
Verify:
TL1
Change-Id: I479869601c0816bbaeaa693a26bf606b6a168da0
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
PD#SWPL-10934
Problem:
viu2 not support for sm1
Solution:
add viu2 support for sm1 and tm2
Verify:
verified on sm1
Change-Id: I3988a84b64b952a76b1b262227e11682f28c7cdd
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
PD#SWPL-10876
Problem:
add del 2ns function
Solution:
add del 2ns function
Verify:
verify on u200 board
Change-Id: I949a1d85e41d0b0e03708243f9559f8de63b0e54
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>
PD#SWPL-7864
Problem:
the red and blue areas of the fourth frequency band
are missing color serious
Solution:
debug by VLSI(yanling), add cue init setting;
Verify:
S905X3
Change-Id: Idc8e5e811e0f2a8195cc70ebb8df0af8f080b174
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#SWPL-6033
Problem:
afbc mode, when di bypass mode switch di path,
will cause flashing
Solution:
when mode change, request hw afbc from vpp, when idle
di use afbc, vpp need switch to none afbc mode, vf add
VIDTYPE_PRE_DI_AFBC flag for vpp use.
Verify:
tl1
Change-Id: I4aaf96044249d5b79bdc627018f0c0714c85f941
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
PD#TV-7043
Problem:
too much kernel log cause system hang up
Solution:
protect the log by debug flag
Verify:
verify by marconi
Change-Id: I7cb2cdf5e3bee92e136d948a974d9a1240609867
Signed-off-by: Lei Qian <lei.qian@amlogic.com>
PD#TV-3042
Problem:
3D function did not support afbc format before
Solution:
Add the support case which format is afbc.
Verify:
x301
Change-Id: I38189bfa78eec6ac811fb81631514d7d7b8b3d62
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
b8d9145 vpp: add interface to force non-afbc path [1/1]
c807fc4 vpp: tm2: add vd2 function for tm2 [2/2]
eea348a vpp: tm2: add vpp and sr support [1/2]
f08c28c video: Some interlace stream will stuck when pts rebound [1/1]
53b2624 amlvideo: reset video_inuse when amlvideo stop [1/1]
17cdaf3 amvideo: set black_threshold_height default 48 [1/1]
1cd025d vpp: set default aspect when the ratecontrol is zero [1/1]
58a2e8f vpp: Modify vframe epoll event [1/1]
94b0dc8 vpp: Modify vframe epoll event [1/1]
e98d6d3 video: enable pts calculation when hold video state changes [1/1]
43d30c4 vpp: add histgram test interface for vpp slt test [1/1]
2677784 amvecm: optimize amvecm update in vsync [1/1]
af78b0f vpp: increase the afbc burst len as 4 for txlx [1/1]
1ace6fc vpp: hold the vpp setting when meet the non-dw afbc frame [1/1]
e8a3758 vpp: 3d: disable crop when 3d playback or hdmi in [1/1]
4e6774d vpp: add black_threshold to disable video when window is too small[1/1]
3ae164f vpp: including crop info when AFBC switch to normal frame [1/1]
c67657f vpp: add the pic_mode backup to check difference [1/1]
33b1aee video: timming gets error when switching channels [1/1]
233779e vpp: add log switch in vpp_set_filters [1/1]
b00582b vpp: config the vd1 canvas1 correctly when 3D enabled [1/1]
607bc19 vpp: support 3D with afbc format [1/1]
vpp: config the vd1 canvas1 correctly when 3D enabled [1/1]
PD#TV-3086
Problem:
3D display abnormal. The vd1 canvas1 was incorrect.
Solution:
When enabled 3D function, config vd1 canvas1 correctly
Verify:
x301
Change-Id: I201cda2f33badf1af54ab4f177a17f761c7cea8d
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
vpp: add log switch in vpp_set_filters [1/1]
PD#SWPL-5942
Problem:
Too many log when DI process called the vpp_set_filters with AFBC.
Solution:
Add log switch to disable it.
Verify:
verified on X301
Change-Id: I34c8573bed78e49d27ec386279e929e617bf76d5
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
video: timming gets error when switching channels [1/1]
PD#TV-3062
Problem:
When switching channels, Hisense platform needs hold video,
and the timming obtained at this time is wrong
Solution:
because we have add hold video function, so get width and
height interface give the last video frame width and height,
and so on change the video
Verify:
X301
Change-Id: I331a4589dcb5f5785dce7eea6d8cd03c92d733d2
Signed-off-by: Xiaoming Sui <xiaoming.sui@amlogic.com>
vpp: add the pic_mode backup to check difference [1/1]
PD#TV-2929
Problem:
The pic_mode in cur_dispbuf was changed but not be detected.
Solution:
Add global pic_mode variable to check if the pic_mode in cur_dispbuf
is changed. If so, force vpp_set_filters.
Verify:
verified on x301
Change-Id: I5b95f512ad0823b031989f05526f114694887f2b
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
vpp: including crop info when AFBC switch to normal frame [1/1]
PD#SWPL-6347
Problem:
When AFBC switch to normal frame, excluding the crop information, the pps
parameters are calculated with wrong input size.
Solution:
1.Add the crop information, when afbc swicth to normal frame.
2.check ratio of compress_width/width, sync to crop value
Verify:
verified on x301
Change-Id: Ib943f8a11263ce577952e589bc172d8b7bafd954
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
vpp: add black_threshold to disable video when window is too small [1/1]
PD#TV-3641
Problem:
Add new interface to disable video when window is too small
Solution:
Add the black_threshold interface to control the threshold size.
And set the default value is width=20, height=30.
Verify:
verified by x301
Change-Id: Ifeb376c2e2edbb5706b2cdc2d08421bd0086b01e
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
vpp: 3d: disable crop when 3d playback or hdmi in [1/1]
PD#TV-3962
Problem:
3D mode does not support crop function
Solution:
Remove crop when 3D display.
Verify:
Verified on x301
Change-Id: Id35dd662886be24e3ec78d070e3a70f513f89b16
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
vpp: hold the vpp setting when meet the non-dw afbc frame [1/1]
PD#SWPL-7513
Problem:
When meet the non-dw afbc frame, vpp can not display with
scaling down as expected.
Solution:
Hold the current vpp setting and wait provider to switch
non-afbc.
Verify:
x301
Change-Id: I3c0e678d2da42376f3a77e334b8c5ce48460273b
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
vpp: increase the afbc burst len as 4 for txlx [1/1]
PD#TV-3132
Problem:
When playing 4K afbc and scaling down to small window,
the vskip is 1 and DDR freq is also lower, the display will
flicker caused by DDR bandwidth issue.
Solution:
Increase the afbc mif burst len from 2 to 4. And enable
the dmc adjustment in that case.
Verify:
r311, verify pass
Change-Id: Ia431a93f6083fd584b7e2eb14f777c5a5e7c20e7
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
amvecm: optimize amvecm update in vsync [1/1]
PD#SWPL-6475
Problem:
hdmi input signal, video flicker
Solution:
optimize amvecm update in vsync
Verify:
verify on TL1
Change-Id: I3379333053fc52b8a33747ca83b1d6d68ea874ab
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
vpp: add histgram test interface for vpp slt test [1/1]
PD#GH-31
Problem:
Need pattern to filter the error vpp modules in SLT test
Solution:
Using clipping and histgram function to create the test pattern
and get the histgram data.
Verify:
verified on w400
Change-Id: I52680c96f568980f71ac8c27c4b66352fea96651
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
video: enable pts calculation when hold video state changes [1/1]
PD#TV-3999
Problem:
dtmb individual channel switching speed is slow,
it takes about 16s
Solution:
enable pts calculation when hold video
state changes.
Verify:
X301
Change-Id: I4c8eda3af3df894d8116461abf63c3dda45c8ce3
Signed-off-by: Rui Wang <rui.wang@amlogic.com>
vpp: Modify vframe epoll event [1/1]
PD#SWPL-8850
Problem:
too many print when channel change.
Solution:
Modify vframe epoll event flow to avoid same event.
Verify:
verify on marconi.
Change-Id: Id709439f24d3cad82df6082c477cacce1a9b9cc7
Signed-off-by: qiyao.zhou <qiyao.zhou@amlogic.com>
vpp: Modify vframe epoll event [1/1]
PD#SWPL-8850
Problem:
too many print when channel change.
Solution:
Modify vframe epoll event flow to avoid same event.
Verify:
verify on marconi.
Change-Id: Iefbd190c0280276bf941c48bf99706a0f2573df1
Signed-off-by: qiyao.zhou <qiyao.zhou@amlogic.com>
vpp: set default aspect when the ratecontrol is zero [1/1]
PD#TV-5266
Problem:
Vpp used the wrong aspect ratio in 3D, screen mode = normal
and aspect ratio is 0 in ratecontrol variable.
Solution:
When the aspect ratio is 0, set the default value as
(height << 8) / width
Verify:
Verified by x301
Change-Id: I34f7cd3ce5ed1818d3090ebb4be934225038625e
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
amvideo: set black_threshold_height default 48 [1/1]
PD#OTT-1836
Problem:
disable video when window is too small
Solution:
set black_threshold_height default 48
Verify:
U212
Change-Id: I9ed7deb54baef1c44bb9cc0c1a4d699140663864
Signed-off-by: jintao xu <jintao.xu@amlogic.com>
amlvideo: reset video_inuse when amlvideo stop [1/1]
PD#TV-6189
Problem:
video_inuse always is 1 when codec server crash
Solution:
reset video_inuse when amlvideo stop
Verify:
TL1
Change-Id: I5b1b808668e3b2fb78781a4ea1ccbaefc3507d2b
Signed-off-by: Lifeng Cao <lifeng.cao@amlogic.com>
video: Some interlace stream will stuck when pts rebound [1/1]
PD#TV-6236
Problem:
Some interlace stream di has buffer count more than 16
If video pts rebound in this stream. The condition that
(abs(omx_pts_set_index - next_vf->omx_index) <= 16) is
not true. So this frame can not toggle always.
Solution:
Delete this condition that
(abs(omx_pts_set_index - next_vf->omx_index) <= 16)
Verify:
verify TL1
Change-Id: I7e8c12ec72d086b0516f7c7490b492e16e36e8fe
Signed-off-by: Lifeng Cao <lifeng.cao@amlogic.com>
vpp: tm2: add vpp and sr support [1/2]
PD#SWPL-6615
Problem:
Need vpp and sr supprt for sm2
Solution:
add support for tm2
Verify:
test pass on tm2 skt
Change-Id: I0ae2cb178fcbe047cdfec6b4e200424178993e6e
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
vpp: tm2: add vd2 function for tm2 [2/2]
PD#SWPL-6615
Problem:
Need vd2 function
Solution:
add vd2 function for tm2:
1.vd2 pps scaler
2.disable vd2 afbc
Verify:
test pass on tm2 skt
Change-Id: I7af5de741b90e443ee065218aecb823ef06d66a7
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
vpp: add interface to force non-afbc path [1/1]
PD#SWPL-7035
Problem:
When DI switched to use VD AFBC, need vpp force to non-afbc first.
Otherwise, display willl flash.
Solution:
Provide new interface to request the vpp release afbc hardware first.
Then return the current afbc status.
Verify:
verified on x301
Change-Id: Ibb2b897db7d2f2c40006433d63709988992c84f1
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#OTT-4743
Problem:
string withou null-termination
Solution:
ensure there is a null-termination in the string
Verify:
p212
Change-Id: Icfb6e39741b5d26611bbd316d6c423b8d4715105
Signed-off-by: apollo.ling <apollo.ling@amlogic.com>
PD#SWPL-5314
Problem:
1. add a dummy vframe flag VFRAME_FLAG_EMPTY_FRAME_V4L.
2. add the FRAME_BASE_PATH_V4L_* for v4l2 display
3. recycle vframes when the isr recevie the empty vframe.
Solution:
1. fixed some issues for the v4l2 decode.
2. add pause and resume for v4l2 m2m job.
Verify:
todo
Change-Id: I00b44ad4d3a75f7e2167ca347562d002c2690430
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
PD#TV-6448
Problem:
when streams replayed, the video is blocked about 6s sometimes.
Solution:
when streams replayed, if pcr clock enable, then recalculate the
pcr clock for system clock from the stream to sync the video and audio.
Verify:
X301
Change-Id: Ic414fdc102753e1e1dcedfef2a5cb76ddddf6383
Signed-off-by: Xiaoming Sui <xiaoming.sui@amlogic.com>
PD#OTT-4875
Problem:
missing return value check for kstrtoint
Solution:
add this check for kstrtoint
Verify:
verified on g12b-w400
Change-Id: I0515b4b445c78d950201df6547e83578cac32d16
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-10860
Problem:
s912 need to support adb.
Solution:
update dts
Verify:
verify by hertz
Change-Id: I085a0442d229d13d02b963c948d390920aea3dd0
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#SWPL-5522
Problem:
S912 display S912 Android P support for osd
Solution:
add memory-region for gxm logo
Verify:
verified on gxm-q201
Change-Id: If4efec47f939a944530ef1dc0f7a3b8abf245a47
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-5522
Problem:
S912 display S912 Android P support for osd
Solution:
modify VIU_MISC_CTRL1 for gxm
Verify:
verified on gxm-q201
Change-Id: I2bccfb3fe03864e55d41ab4f9ecf4db68d9dfbea
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
