[ Upstream commit 27728ba80f ]
All tcp_remove_empty_skb() callers now use tcp_write_queue_tail()
for the skb argument, we can therefore factorize code.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 72377ab2d6 ("mptcp: more conservative check for zero probes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ded97bc41 ]
TCP sendmsg() no longer puts payload in skb head, we can remove
dead code.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 72377ab2d6 ("mptcp: more conservative check for zero probes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8befdc411 ]
The Qualcomm LPASS LPI pin controller driver uses one lock for guarding
Read-Modify-Write code for slew rate registers. However the pin
configuration and muxing registers have exactly the same RMW code but
are not protected.
Pin controller framework does not provide locking here, thus it is
possible to trigger simultaneous change of pin configuration registers
resulting in non-atomic changes.
Protect from concurrent access by re-using the same lock used to cover
the slew rate register. Using the same lock instead of adding second
one will make more sense, once we add support for newer Qualcomm SoC,
where slew rate is configured in the same register as pin
configuration/muxing.
Fixes: 6e261d1090 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver")
Cc: stable@vger.kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231013145705.219954-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc9b364bb1 ]
There are race conditions that may lead to inet6_dev refcount underflow
in xfrm6_dst_destroy() and rt6_uncached_list_flush_dev().
One of the refcount underflow bugs is shown below:
(cpu 1) | (cpu 2)
xfrm6_dst_destroy() |
... |
in6_dev_put() |
| rt6_uncached_list_flush_dev()
... | ...
| in6_dev_put()
rt6_uncached_list_del() | ...
... |
xfrm6_dst_destroy() calls rt6_uncached_list_del() after in6_dev_put(),
so rt6_uncached_list_flush_dev() has a chance to call in6_dev_put()
again for the same inet6_dev.
Fix it by moving in6_dev_put() after rt6_uncached_list_del() in
xfrm6_dst_destroy().
Fixes: 510c321b55 ("xfrm: reuse uncached_list to track xdsts")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3b384cc74b ]
Looks like the driver sleep pins configuration is unusable. Adding the
sleep pins causes the usb phy to not respond. We need to use the default
pins in probe, and only set sleep pins at phy_mdm6600_device_power_off().
As the modem can also be booted to a serial port mode for firmware
flashing, let's make the pin changes limited to probe and remove. For
probe, we get the default pins automatically. We only need to set the
sleep pins in phy_mdm6600_device_power_off() to prevent the modem from
waking up because the gpio line glitches.
If it turns out that we need a separate state for phy_mdm6600_power_on()
and phy_mdm6600_power_off(), we can use the pinctrl idle state.
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Fixes: 2ad2af0816 ("phy: mapphone-mdm6600: Improve phy related runtime PM calls")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230913060433.48373-3-tony@atomide.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit fc363413ef upstream.
We found a glitch when configuring the pad as output high. To avoid this
glitch, move the data value setting before direction config in the
function vf610_gpio_direction_output().
Fixes: 659d8a6231 ("gpio: vf610: add imx7ulp support")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
[Bartosz: tweak the commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f37cc2fc27 upstream.
Older Asus laptops change the backlight level themselves and then send
WMI events with different codes for different backlight levels.
The asus-wmi.c code maps the entire range of codes reported on
brightness down keypresses to an internal ASUS_WMI_BRN_DOWN code:
define NOTIFY_BRNUP_MIN 0x11
define NOTIFY_BRNUP_MAX 0x1f
define NOTIFY_BRNDOWN_MIN 0x20
define NOTIFY_BRNDOWN_MAX 0x2e
if (code >= NOTIFY_BRNUP_MIN && code <= NOTIFY_BRNUP_MAX)
code = ASUS_WMI_BRN_UP;
else if (code >= NOTIFY_BRNDOWN_MIN && code <= NOTIFY_BRNDOWN_MAX)
code = ASUS_WMI_BRN_DOWN;
Before this commit all the NOTIFY_BRNDOWN_MIN - NOTIFY_BRNDOWN_MAX
aka 0x20 - 0x2e events were mapped to 0x20.
This mapping is causing issues on new laptop models which actually
send 0x2b events for printscreen presses and 0x2c events for
capslock presses, which get translated into spurious brightness-down
presses.
The plan is disable the 0x11-0x2e special mapping on laptops
where asus-wmi does not register a backlight-device to avoid
the spurious brightness-down keypresses. New laptops always send
0x2e for brightness-down presses, change the special internal
ASUS_WMI_BRN_DOWN value from 0x20 to 0x2e to match this in
preparation for fixing the spurious brightness-down presses.
This change does not have any functional impact since all
of 0x20 - 0x2e is mapped to ASUS_WMI_BRN_DOWN first and only
then checked against the keymap code and the new 0x2e
value is still in the 0x20 - 0x2e range.
Reported-by: James John <me@donjajo.com>
Closes: https://lore.kernel.org/platform-driver-x86/a2c441fe-457e-44cf-a146-0ecd86b037cf@donjajo.com/
Closes: https://bbs.archlinux.org/viewtopic.php?pid=2123716
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231017090725.38163-2-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c1ae1c59c8 upstream.
Since the fixed commits both zdev->iommu_bitmap and zdev->lazy_bitmap
are allocated as vzalloc(zdev->iommu_pages / 8). The problem is that
zdev->iommu_bitmap is a pointer to unsigned long but the above only
yields an allocation that is a multiple of sizeof(unsigned long) which
is 8 on s390x if the number of IOMMU pages is a multiple of 64.
This in turn is the case only if the effective IOMMU aperture is
a multiple of 64 * 4K = 256K. This is usually the case and so didn't
cause visible issues since both the virt_to_phys(high_memory) reduced
limit and hardware limits use nice numbers.
Under KVM, and in particular with QEMU limiting the IOMMU aperture to
the vfio DMA limit (default 65535), it is possible for the reported
aperture not to be a multiple of 256K however. In this case we end up
with an iommu_bitmap whose allocation is not a multiple of
8 causing bitmap operations to access it out of bounds.
Sadly we can't just fix this in the obvious way and use bitmap_zalloc()
because for large RAM systems (tested on 8 TiB) the zdev->iommu_bitmap
grows too large for kmalloc(). So add our own bitmap_vzalloc() wrapper.
This might be a candidate for common code, but this area of code will
be replaced by the upcoming conversion to use the common code DMA API on
s390 so just add a local routine.
Fixes: 2245932155 ("s390/pci: use virtual memory for iommu bitmap")
Fixes: 13954fd691 ("s390/pci_dma: improve lazy flush for unmap")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 32671e3799 upstream.
Because group consistency is non-atomic between parent (filedesc) and children
(inherited) events, it is possible for PERF_FORMAT_GROUP read() to try and sum
non-matching counter groups -- with non-sensical results.
Add group_generation to distinguish the case where a parent group removes and
adds an event and thus has the same number, but a different configuration of
events as inherited groups.
This became a problem when commit fa8c269353 ("perf/core: Invert
perf_read_group() loops") flipped the order of child_list and sibling_list.
Previously it would iterate the group (sibling_list) first, and for each
sibling traverse the child_list. In this order, only the group composition of
the parent is relevant. By flipping the order the group composition of the
child (inherited) events becomes an issue and the mis-match in group
composition becomes evident.
That said; even prior to this commit, while reading of a group that is not
equally inherited was not broken, it still made no sense.
(Ab)use ECHILD as error return to indicate issues with child process group
composition.
Fixes: fa8c269353 ("perf/core: Invert perf_read_group() loops")
Reported-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231018115654.GK33217@noisy.programming.kicks-ass.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3820c4fdc2 upstream.
Trying to stop a queue which hasn't been allocated will result
in a warning due to calling mutex_lock() against an uninitialized mutex.
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 4 PID: 104150 at kernel/locking/mutex.c:579
Call trace:
RIP: 0010:__mutex_lock+0x1173/0x14a0
nvme_rdma_stop_queue+0x1b/0xa0 [nvme_rdma]
nvme_rdma_teardown_io_queues.part.0+0xb0/0x1d0 [nvme_rdma]
nvme_rdma_delete_ctrl+0x50/0x100 [nvme_rdma]
nvme_do_delete_ctrl+0x149/0x158 [nvme_core]
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0c21a18d5d upstream.
acpi_register_gsi() should return a negative value in case of failure.
Currently, it returns the return value from irq_create_fwspec_mapping().
However, irq_create_fwspec_mapping() returns 0 for failure. Fix the
issue by returning -EINVAL if irq_create_fwspec_mapping() returns zero.
Fixes: d44fa3d460 ("ACPI: Add support for ResourceSource/IRQ domain mapping")
Cc: 4.11+ <stable@vger.kernel.org> # 4.11+
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
[ rjw: Rename a new local variable ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 379e4adfdd upstream.
This patches fixes commit 51d674a5e4 "NFSv4.1: use
EXCHGID4_FLAG_USE_PNFS_DS for DS server", purpose of that
commit was to mark EXCHANGE_ID to the DS with the appropriate
flag.
However, connection to MDS can return both EXCHGID4_FLAG_USE_PNFS_DS
and EXCHGID4_FLAG_USE_PNFS_MDS set but previous patch would only
remember the USE_PNFS_DS and for the 2nd EXCHANGE_ID send that
to the MDS.
Instead, just mark the pnfs path exclusively.
Fixes: 51d674a5e4 ("NFSv4.1: use EXCHGID4_FLAG_USE_PNFS_DS for DS server")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f63955721a upstream.
We are not allowed to call pnfs_mark_matching_lsegs_return() without
also holding a reference to the layout header, since doing so could lead
to the reference count going to zero when we call
pnfs_layout_remove_lseg(). This again can lead to a hang when we get to
nfs4_evict_inode() and are unable to clear the layout pointer.
pnfs_layout_return_unused_byserver() is guilty of this behaviour, and
has been seen to trigger the refcount warning prior to a hang.
Fixes: b6d49ecd10 ("NFSv4: Fix a pNFS layout related use-after-free race when freeing the inode")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 84ee19bffc upstream.
The OEMID is an 8-bit binary number rather than 16-bit as the current code
parses for. The OEMID occupies bits [111:104] in the CID register, see the
eMMC spec JESD84-B51 paragraph 7.2.3. It seems that the 16-bit comes from
the legacy MMC specs (v3.31 and before).
Let's fix the parsing by simply move to use 8-bit instead of 16-bit. This
means we ignore the impact on some of those old MMC cards that may be out
there, but on the other hand this shouldn't be a problem as the OEMID seems
not be an important feature for these cards.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230927071500.1791882-1-avri.altman@wdc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3a4a893dbb upstream.
The NAND core complies with the ONFI specification, which itself
mentions that after any program or erase operation, a status check
should be performed to see whether the operation was finished *and*
successful.
The NAND core offers helpers to finish a page write (sending the
"PAGE PROG" command, waiting for the NAND chip to be ready again, and
checking the operation status). But in some cases, advanced controller
drivers might want to optimize this and craft their own page write
helper to leverage additional hardware capabilities, thus not always
using the core facilities.
Some drivers, like this one, do not use the core helper to finish a page
write because the final cycles are automatically managed by the
hardware. In this case, the additional care must be taken to manually
perform the final status check.
Let's read the NAND chip status at the end of the page write helper and
return -EIO upon error.
Cc: Michal Simek <michal.simek@amd.com>
Cc: stable@vger.kernel.org
Fixes: 88ffef1b65 ("mtd: rawnand: arasan: Support the hardware BCH ECC engine")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/linux-mtd/20230717194221.229778-2-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3e01d52546 upstream.
The NAND core complies with the ONFI specification, which itself
mentions that after any program or erase operation, a status check
should be performed to see whether the operation was finished *and*
successful.
The NAND core offers helpers to finish a page write (sending the
"PAGE PROG" command, waiting for the NAND chip to be ready again, and
checking the operation status). But in some cases, advanced controller
drivers might want to optimize this and craft their own page write
helper to leverage additional hardware capabilities, thus not always
using the core facilities.
Some drivers, like this one, do not use the core helper to finish a page
write because the final cycles are automatically managed by the
hardware. In this case, the additional care must be taken to manually
perform the final status check.
Let's read the NAND chip status at the end of the page write helper and
return -EIO upon error.
Cc: stable@vger.kernel.org
Fixes: 02f26ecf8c ("mtd: nand: add reworked Marvell NAND controller driver")
Reported-by: Aviram Dali <aviramd@marvell.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Ravi Chandra Minnikanti <rminnikanti@marvell.com>
Link: https://lore.kernel.org/linux-mtd/20230717194221.229778-1-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9777cc13fd upstream.
The NAND core complies with the ONFI specification, which itself
mentions that after any program or erase operation, a status check
should be performed to see whether the operation was finished *and*
successful.
The NAND core offers helpers to finish a page write (sending the
"PAGE PROG" command, waiting for the NAND chip to be ready again, and
checking the operation status). But in some cases, advanced controller
drivers might want to optimize this and craft their own page write
helper to leverage additional hardware capabilities, thus not always
using the core facilities.
Some drivers, like this one, do not use the core helper to finish a page
write because the final cycles are automatically managed by the
hardware. In this case, the additional care must be taken to manually
perform the final status check.
Let's read the NAND chip status at the end of the page write helper and
return -EIO upon error.
Cc: Michal Simek <michal.simek@amd.com>
Cc: stable@vger.kernel.org
Fixes: 08d8c62164 ("mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controller")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/linux-mtd/20230717194221.229778-3-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 311cca4066 ]
dev_get_valid_name() overwrites the netdev's name on success.
This makes it hard to use in prepare-commit-like fashion,
where we do validation first, and "commit" to the change
later.
Factor out a helper which lets us save the new name to a buffer.
Use it to fix the problem of notification on netns move having
incorrect name:
5: eth0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default
link/ether be:4d:58:f9:d5:40 brd ff:ff:ff:ff:ff:ff
6: eth1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default
link/ether 1e:4a:34:36:e3:cd brd ff:ff:ff:ff:ff:ff
[ ~]# ip link set dev eth0 netns 1 name eth1
ip monitor inside netns:
Deleted inet eth0
Deleted inet6 eth0
Deleted 5: eth1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default
link/ether be:4d:58:f9:d5:40 brd ff:ff:ff:ff:ff:ff new-netnsid 0 new-ifindex 7
Name is reported as eth1 in old netns for ifindex 5, already renamed.
Fixes: d90310243f ("net: device name allocation cleanups")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75ea27d0d6 ]
__dev_get_by_name is currently used to either retrieve a net device
reference using its name or to check if a name is already used by a
registered net device (per ns). In the later case there is no need to
return a reference to a net device.
Introduce a new helper, netdev_name_in_use, to check if a name is
currently used by a registered net device without leaking a reference
the corresponding net device. This helper uses netdev_name_node_lookup
instead of __dev_get_by_name as we don't need the extra logic retrieving
a reference to the corresponding net device.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 311cca4066 ("net: fix ifname in netlink ntf during netns move")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b541260615 ]
memcmp is not consider safe to use with cryptographic secrets:
'Do not use memcmp() to compare security critical data, such as
cryptographic secrets, because the required CPU time depends on the
number of equal bytes.'
While usage of memcmp for ZERO_KEY may not be considered a security
critical data, it can lead to more usage of memcmp with pairing keys
which could introduce more security problems.
Fixes: 455c2ff0a5 ("Bluetooth: Fix BR/EDR out-of-band pairing with only initiator data")
Fixes: 33155c4aae ("Bluetooth: hci_event: Ignore NULL link key")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92fd396345 ]
Currently, whenever fw issues a change ownership event, the PF that owns
the fw tracer drops its ownership directly and the other PFs try to pick
up the ownership via what MTRC register suggests.
In some cases, driver releases the ownership of the tracer and reacquires
it later on. Whenever the driver releases ownership of the tracer, fw
issues a change ownership event. This event can be delayed and come after
driver has reacquired ownership of the tracer. Thus the late event will
trigger the tracer owner PF to release the ownership again and lead to a
scenario where no PF is owning the tracer.
To prevent the scenario described above, when handling a change
ownership event, do not drop ownership of the tracer directly, instead
read the fw MTRC register to retrieve the up-to-date owner of the tracer
and set it accordingly in driver level.
Fixes: f53aaa31cc ("net/mlx5: FW tracer, implement tracer logic")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
