commit d51e1d3f6b upstream.
Even when we are outside the nested guest, some vmcs02 fields
may not be in sync vs vmcs12. This is intentional, even across
nested VM-exit, because the sync can be delayed until the nested
hypervisor performs a VMCLEAR or a VMREAD/VMWRITE that affects those
rarely accessed fields.
However, during KVM_GET_NESTED_STATE, the vmcs12 has to be up to date to
be able to restore it. To fix that, call copy_vmcs02_to_vmcs12_rare()
before the vmcs12 contents are copied to userspace.
Fixes: 7952d769c2 ("KVM: nVMX: Sync rarely accessed guest fields only when needed")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210114205449.8715-2-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a78e15802 upstream.
VMX also uses KVM_REQ_GET_NESTED_STATE_PAGES for the Hyper-V eVMCS,
which may need to be loaded outside guest mode. Therefore we cannot
WARN in that case.
However, that part of nested_get_vmcs12_pages is _not_ needed at
vmentry time. Split it out of KVM_REQ_GET_NESTED_STATE_PAGES handling,
so that both vmentry and migration (and in the latter case, independent
of is_guest_mode) do the parts that are needed.
Cc: <stable@vger.kernel.org> # 5.10.x: f2c7ef3ba: KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f2c7ef3ba9 upstream.
It is possible to exit the nested guest mode, entered by
svm_set_nested_state prior to first vm entry to it (e.g due to pending event)
if the nested run was not pending during the migration.
In this case we must not switch to the nested msr permission bitmap.
Also add a warning to catch similar cases in the future.
Fixes: a7d5c7ce41 ("KVM: nSVM: delay MSR permission processing to first nested VM run")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210107093854.882483-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e61ab2a320 upstream.
Since we know vPMU will not work properly when (1) the guest bit_width(s)
of the [gp|fixed] counters are greater than the host ones, or (2) guest
requested architectural events exceeds the range supported by the host, so
we can setup a smaller left shift value and refresh the guest cpuid entry,
thus fixing the following UBSAN shift-out-of-bounds warning:
shift exponent 197 is too large for 64-bit type 'long long unsigned int'
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x107/0x163 lib/dump_stack.c:120
ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
__ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:395
intel_pmu_refresh.cold+0x75/0x99 arch/x86/kvm/vmx/pmu_intel.c:348
kvm_vcpu_after_set_cpuid+0x65a/0xf80 arch/x86/kvm/cpuid.c:177
kvm_vcpu_ioctl_set_cpuid2+0x160/0x440 arch/x86/kvm/cpuid.c:308
kvm_arch_vcpu_ioctl+0x11b6/0x2d70 arch/x86/kvm/x86.c:4709
kvm_vcpu_ioctl+0x7b9/0xdb0 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3386
vfs_ioctl fs/ioctl.c:48 [inline]
__do_sys_ioctl fs/ioctl.c:753 [inline]
__se_sys_ioctl fs/ioctl.c:739 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reported-by: syzbot+ae488dc136a4cc6ba32b@syzkaller.appspotmail.com
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20210118025800.34620-1-like.xu@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2f96e40212 upstream.
While running btrfs/011 in a loop I would often ASSERT() while trying to
add a new free space entry that already existed, or get an EEXIST while
adding a new block to the extent tree, which is another indication of
double allocation.
This occurs because when we do the free space tree population, we create
the new root and then populate the tree and commit the transaction.
The problem is when you create a new root, the root node and commit root
node are the same. During this initial transaction commit we will run
all of the delayed refs that were paused during the free space tree
generation, and thus begin to cache block groups. While caching block
groups the caching thread will be reading from the main root for the
free space tree, so as we make allocations we'll be changing the free
space tree, which can cause us to add the same range twice which results
in either the ASSERT(ret != -EEXIST); in __btrfs_add_free_space, or in a
variety of different errors when running delayed refs because of a
double allocation.
Fix this by marking the fs_info as unsafe to load the free space tree,
and fall back on the old slow method. We could be smarter than this,
for example caching the block group while we're populating the free
space tree, but since this is a serious problem I've opted for the
simplest solution.
CC: stable@vger.kernel.org # 4.9+
Fixes: a5ed918285 ("Btrfs: implement the free space B-tree")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c41ec4529d upstream.
This effectively reverts commit d5c8238849 ("btrfs: convert
data_seqcount to seqcount_mutex_t").
While running fstests on 32 bits test box, many tests failed because of
warnings in dmesg. One of those warnings (btrfs/003):
[66.441317] WARNING: CPU: 6 PID: 9251 at include/linux/seqlock.h:279 btrfs_remove_chunk+0x58b/0x7b0 [btrfs]
[66.441446] CPU: 6 PID: 9251 Comm: btrfs Tainted: G O 5.11.0-rc4-custom+ #5
[66.441449] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.14.0-1 04/01/2014
[66.441451] EIP: btrfs_remove_chunk+0x58b/0x7b0 [btrfs]
[66.441472] EAX: 00000000 EBX: 00000001 ECX: c576070c EDX: c6b15803
[66.441475] ESI: 10000000 EDI: 00000000 EBP: c56fbcfc ESP: c56fbc70
[66.441477] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010246
[66.441481] CR0: 80050033 CR2: 05c8da20 CR3: 04b20000 CR4: 00350ed0
[66.441485] Call Trace:
[66.441510] btrfs_relocate_chunk+0xb1/0x100 [btrfs]
[66.441529] ? btrfs_lookup_block_group+0x17/0x20 [btrfs]
[66.441562] btrfs_balance+0x8ed/0x13b0 [btrfs]
[66.441586] ? btrfs_ioctl_balance+0x333/0x3c0 [btrfs]
[66.441619] ? __this_cpu_preempt_check+0xf/0x11
[66.441643] btrfs_ioctl_balance+0x333/0x3c0 [btrfs]
[66.441664] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs]
[66.441683] btrfs_ioctl+0x414/0x2ae0 [btrfs]
[66.441700] ? __lock_acquire+0x35f/0x2650
[66.441717] ? lockdep_hardirqs_on+0x87/0x120
[66.441720] ? lockdep_hardirqs_on_prepare+0xd0/0x1e0
[66.441724] ? call_rcu+0x2d3/0x530
[66.441731] ? __might_fault+0x41/0x90
[66.441736] ? kvm_sched_clock_read+0x15/0x50
[66.441740] ? sched_clock+0x8/0x10
[66.441745] ? sched_clock_cpu+0x13/0x180
[66.441750] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs]
[66.441750] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs]
[66.441768] __ia32_sys_ioctl+0x165/0x8a0
[66.441773] ? __this_cpu_preempt_check+0xf/0x11
[66.441785] ? __might_fault+0x89/0x90
[66.441791] __do_fast_syscall_32+0x54/0x80
[66.441796] do_fast_syscall_32+0x32/0x70
[66.441801] do_SYSENTER_32+0x15/0x20
[66.441805] entry_SYSENTER_32+0x9f/0xf2
[66.441808] EIP: 0xab7b5549
[66.441814] EAX: ffffffda EBX: 00000003 ECX: c4009420 EDX: bfa91f5c
[66.441816] ESI: 00000003 EDI: 00000001 EBP: 00000000 ESP: bfa91e98
[66.441818] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000292
[66.441833] irq event stamp: 42579
[66.441835] hardirqs last enabled at (42585): [<c60eb065>] console_unlock+0x495/0x590
[66.441838] hardirqs last disabled at (42590): [<c60eafd5>] console_unlock+0x405/0x590
[66.441840] softirqs last enabled at (41698): [<c601b76c>] call_on_stack+0x1c/0x60
[66.441843] softirqs last disabled at (41681): [<c601b76c>] call_on_stack+0x1c/0x60
========================================================================
btrfs_remove_chunk+0x58b/0x7b0:
__seqprop_mutex_assert at linux/./include/linux/seqlock.h:279
(inlined by) btrfs_device_set_bytes_used at linux/fs/btrfs/volumes.h:212
(inlined by) btrfs_remove_chunk at linux/fs/btrfs/volumes.c:2994
========================================================================
The warning is produced by lockdep_assert_held() in
__seqprop_mutex_assert() if CONFIG_LOCKDEP is enabled.
And "olumes.c:2994 is btrfs_device_set_bytes_used() with mutex lock
fs_info->chunk_mutex held already.
After adding some debug prints, the cause was found that many
__alloc_device() are called with NULL @fs_info (during scanning ioctl).
Inside the function, btrfs_device_data_ordered_init() is expanded to
seqcount_mutex_init(). In this scenario, its second
parameter info->chunk_mutex is &NULL->chunk_mutex which equals
to offsetof(struct btrfs_fs_info, chunk_mutex) unexpectedly. Thus,
seqcount_mutex_init() is called in wrong way. And later
btrfs_device_get/set helpers trigger lockdep warnings.
The device and filesystem object lifetimes are different and we'd have
to synchronize initialization of the btrfs_device::data_seqcount with
the fs_info, possibly using some additional synchronization. It would
still not prevent concurrent access to the seqcount lock when it's used
for read and initialization.
Commit d5c8238849 ("btrfs: convert data_seqcount to seqcount_mutex_t")
does not mention a particular problem being fixed so revert should not
cause any harm and we'll get the lockdep warning fixed.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=210139
Reported-by: Erhard F <erhard_f@mailbox.org>
Fixes: d5c8238849 ("btrfs: convert data_seqcount to seqcount_mutex_t")
CC: stable@vger.kernel.org # 5.10
CC: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Su Yue <l@damenly.su>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6808965568 upstream.
of_match_node() calls __of_match_node() which loops though the entries of
matches array. It stops when condition:
(matches->name[0] || matches->type[0] || matches->compatible[0]) is
false. Thus, add a null entry at the end of at91_soc_allowed_list[]
array.
Fixes: caab13b496 ("drivers: soc: atmel: Avoid calling at91_soc_init on non AT91 SoCs")
Cc: stable@vger.kernel.org #4.12+
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f6543f28b upstream.
The patch that added src_dma/dst_dma to struct mv_cesa_tdma_desc
is broken on 64-bit systems as the size of the descriptor has been
changed. This patch fixes it by using u32 instead of dma_addr_t.
Fixes: e62291c1d9 ("crypto: marvell/cesa - Fix sparse warnings")
Cc: <stable@vger.kernel.org>
Reported-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 355845b738 upstream.
Since commit 4466bf8282 ("efi/apple-properties: use
PROPERTY_ENTRY_U8_ARRAY_LEN"), my MacBook Pro issues a -ENODATA error
when trying to assign EFI properties to the discrete GPU:
pci 0000:01:00.0: assigning 56 device properties
pci 0000:01:00.0: error -61 assigning properties
That's because some of the properties have no value. They're booleans
whose presence can be checked by drivers, e.g. "use-backlight-blanking".
Commit 6e98503dba ("efi/apple-properties: Remove redundant attribute
initialization from unmarshal_key_value_pairs()") employed a trick to
store such booleans as u8 arrays (which is the data type used for all
other EFI properties on Macs): It cleared the property_entry's
"is_array" flag, thereby denoting that the value is stored inline in the
property_entry.
Commit 4466bf8282 erroneously removed that trick. It was probably a
little fragile to begin with.
Reinstate support for boolean properties by explicitly invoking the
PROPERTY_ENTRY_BOOL() initializer for properties with zero-length value.
Fixes: 4466bf8282 ("efi/apple-properties: use PROPERTY_ENTRY_U8_ARRAY_LEN")
Cc: <stable@vger.kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/be958bda75331a011d53c696d1deec8dccd06fd2.1609388549.git.lukas@wunner.de
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5e6dca82bc upstream.
Arnd found a randconfig that produces the warning:
arch/x86/entry/thunk_64.o: warning: objtool: missing symbol for insn at
offset 0x3e
when building with LLVM_IAS=1 (Clang's integrated assembler). Josh
notes:
With the LLVM assembler not generating section symbols, objtool has no
way to reference this code when it generates ORC unwinder entries,
because this code is outside of any ELF function.
The limitation now being imposed by objtool is that all code must be
contained in an ELF symbol. And .L symbols don't create such symbols.
So basically, you can use an .L symbol *inside* a function or a code
segment, you just can't use the .L symbol to contain the code using a
SYM_*_START/END annotation pair.
Fangrui notes that this optimization is helpful for reducing image size
when compiling with -ffunction-sections and -fdata-sections. I have
observed on the order of tens of thousands of symbols for the kernel
images built with those flags.
A patch has been authored against GNU binutils to match this behavior
of not generating unused section symbols ([1]), so this will
also become a problem for users of GNU binutils once they upgrade to 2.36.
Omit the .L prefix on a label so that the assembler will emit an entry
into the symbol table for the label, with STB_LOCAL binding. This
enables objtool to generate proper unwind info here with LLVM_IAS=1 or
GNU binutils 2.36+.
[ bp: Massage commit message. ]
Reported-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Suggested-by: Borislav Petkov <bp@alien8.de>
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20210112194625.4181814-1-ndesaulniers@google.com
Link: https://github.com/ClangBuiltLinux/linux/issues/1209
Link: https://reviews.llvm.org/D93783
Link: https://sourceware.org/binutils/docs/as/Symbol-Names.html
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d1bcae833b32f1408485ce69f844dcd7ded093a8 [1]
Cc: Chris Clayton <chris2553@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c12a6384e upstream.
The queues assigned to a matrix mediated device are currently reset when:
* The VFIO_DEVICE_RESET ioctl is invoked
* The mdev fd is closed by userspace (QEMU)
* The mdev is removed from sysfs.
Immediately after the reset of a queue, a call is made to disable
interrupts for the queue. This is entirely unnecessary because the reset of
a queue disables interrupts, so this will be removed.
Furthermore, vfio_ap_irq_disable() does an unconditional PQAP/AQIC which
can result in a specification exception (when the corresponding facility
is not available), so this is actually a bugfix.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
[pasic@linux.ibm.com: minor rework before merging]
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: ec89b55e3b ("s390: ap: implement PAPQ AQIC interception in kernel")
Cc: <stable@vger.kernel.org>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e82080e1f4 upstream.
The number reported by the query is N-1 and I think people reading the
sysfs file would expect N instead. For users creating VMs there's no
actual difference because KVM's limit is currently below the UV's
limit.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Fixes: a0f60f8431 ("s390/protvirt: Add sysfs firmware interface for Ultravisor information")
Cc: stable@vger.kernel.org
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0df28cad06 upstream.
For super block version < BCACHE_SB_VERSION_CDEV_WITH_FEATURES, it
doesn't make sense to check the feature sets. This patch checks
super block version in bch_has_feature_* routines, if the version
doesn't have feature sets yet, returns 0 (false) to the caller.
Fixes: 5342fd4255 ("bcache: set bcache device into read-only mode for BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET")
Fixes: ffa4703275 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket")
Cc: stable@vger.kernel.org # 5.9+
Reported-and-tested-by: Bockholdt Arne <a.bockholdt@precitec-optronik.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ba839b7598 upstream.
While we do handle the additional cursor sizes introduced in NVE4, it looks
like we accidentally broke this when converting over to use Nvidia's
display headers. Since we now use NVVAL in dispnv50/head907d.c in order to
format the value for the cursor layout and NVD9 only had one byte reserved
vs. the 2 bytes reserved in later generations, we end up accidentally
stripping the second bit in the cursor layout format parameter - causing us
to set the wrong cursor size.
This fixes that by adding our own curs_set hook for 917d which uses the
NV917D headers.
Cc: Martin Peres <martin.peres@free.fr>
Cc: Jeremy Cline <jcline@redhat.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: <stable@vger.kernel.org> # v5.9+
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: ed0b86a90b ("drm/nouveau/kms/nv50-: use NVIDIA's headers for core head_curs_set()")
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8a996b2d8a upstream.
The Ux500 platforms have some memory carveouts set aside for
communicating with the modem and for the initial secure software
(ISSW). These areas are protected by the memory controller
and will result in an external abort if accessed like common
read/write memory.
On the legacy boot loaders, these were set aside by using
cmdline arguments such as this:
mem=96M@0 mem_mtrace=15M@96M mem_mshared=1M@111M
mem_modem=16M@112M mali.mali_mem=32M@128M mem=96M@160M
hwmem=127M@256M mem_issw=1M@383M mem_ram_console=1M@384M
mem=638M@385M
Reserve the relevant areas in the device tree instead. The
"mali", "hwmem", "mem_ram_console" and the trailing 1MB at the
end of the memory reservations in the list are not relevant for
the upstream kernel as these are nowadays replaced with
upstream technologies such as CMA. The modem and ISSW
reservations are necessary.
This was manifested in a bug that surfaced in response to
commit 7fef431be9 ("mm/page_alloc: place pages to tail in __free_pages_core()")
which changes the behaviour of memory allocations
in such a way that the platform will sooner run into these
dangerous areas, with "Unhandled fault: imprecise external
abort (0xc06) at 0xb6fd83dc" or similar: the real reason
turns out to be that the PTE is pointing right into one of
the reserved memory areas. We were just lucky until now.
We need to augment the DB8500 and DB8520 SoCs similarly
and also create a new include for the DB9500 used in the
Snowball since this does not have a modem and thus does
not need the modem memory reservation, albeit it needs
the ISSW reservation.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Cc: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201213225517.3838501-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd25c88366 upstream.
to be consistent with kernel versions up to v5.9 (mmc aliases not used here).
usdhc1 is not wired up on this board and therefore cannot be used.
Start mmc aliases with usdhc2.
Signed-off-by: Soeren Moch <smoch@web.de>
Cc: stable@vger.kernel.org # 5.10.x
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e1def45b52 upstream.
Commit 528222d853 ("media: rc: harmonize infrared durations to
microseconds") missed to switch the min_timeout calculation from ns
to us. This resulted in a minimum timeout of 1.2 seconds instead of 1.2ms,
leading to large delays and long key repeats.
Fix this by applying proper ns->us conversion.
Cc: stable@vger.kernel.org
Fixes: 528222d853 ("media: rc: harmonize infrared durations to microseconds")
Signed-off-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 06b831588b upstream.
Commit 528222d853 ("media: rc: harmonize infrared durations to
microseconds") missed to switch some timeout calculations from
nanoseconds to microseconds. This resulted in spurious key_up+key_down
events at the last scancode if the rc device uses a long timeout
(eg 100ms on nuvoton-cir) as the device timeout wasn't properly
accounted for in the keyup timeout calculation.
Fix this by applying the proper conversion functions.
Cc: stable@vger.kernel.org
Fixes: 528222d853 ("media: rc: harmonize infrared durations to microseconds")
Signed-off-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 73bc0b0c2a upstream.
During H264 API overhaul subtle bug was introduced Cedrus driver.
Progressive references have both, top and bottom reference flags set.
Cedrus reference list expects only bottom reference flag and only when
interlaced frames are decoded. However, due to a bug in Cedrus check,
exclusivity is not tested and that flag is set also for progressive
references. That causes "jumpy" background with many videos.
Fix that by checking that only bottom reference flag is set in control
and nothing else.
Tested-by: Andre Heider <a.heider@gmail.com>
Fixes: cfc8c3ed53 ("media: cedrus: h264: Properly configure reference field")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 00e35f2b0e upstream.
When building a kernel without module support, the CONFIG_MLONGCALL option
needs to be enabled in order to reach symbols which are outside of a 22-bit
branch.
This patch changes the autodetection in the Kconfig script to always enable
CONFIG_MLONGCALL when modules are disabled and uses a far call to
preempt_schedule_irq() in intr_do_preempt() to reach the symbol in all cases.
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: kernel test robot <lkp@intel.com>
Cc: stable@vger.kernel.org # v5.6+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 56c91a1843 upstream.
Function kernel_kexec() is called with lock system_transition_mutex
held in reboot system call. While inside kernel_kexec(), it will
acquire system_transition_mutex agin. This will lead to dead lock.
The dead lock should be easily triggered, it hasn't caused any
failure report just because the feature 'kexec jump' is almost not
used by anyone as far as I know. An inquiry can be made about who
is using 'kexec jump' and where it's used. Before that, let's simply
remove the lock operation inside CONFIG_KEXEC_JUMP ifdeffery scope.
Fixes: 55f2503c3b ("PM / reboot: Eliminate race between reboot and suspend")
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Pingfan Liu <kernelfans@gmail.com>
Cc: 4.19+ <stable@vger.kernel.org> # 4.19+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 81b704d3e4 upstream.
Calling acpi_thermal_check() from acpi_thermal_notify() directly
is problematic if _TMP triggers Notify () on the thermal zone for
which it has been evaluated (which happens on some systems), because
it causes a new acpi_thermal_notify() invocation to be queued up
every time and if that takes place too often, an indefinite number of
pending work items may accumulate in kacpi_notify_wq over time.
Besides, it is not really useful to queue up a new invocation of
acpi_thermal_check() if one of them is pending already.
For these reasons, rework acpi_thermal_notify() to queue up a thermal
check instead of calling acpi_thermal_check() directly and only allow
one thermal check to be pending at a time. Moreover, only allow one
acpi_thermal_check_fn() instance at a time to run
thermal_zone_device_update() for one thermal zone and make it return
early if it sees other instances running for the same thermal zone.
While at it, fold acpi_thermal_check() into acpi_thermal_check_fn(),
as it is only called from there after the other changes made here.
[This issue appears to have been exposed by commit 6d25be5782
("sched/core, workqueues: Distangle worker accounting from rq
lock"), but it is unclear why it was not visible earlier.]
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208877
Reported-by: Stephen Berman <stephen.berman@gmx.net>
Diagnosed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Stephen Berman <stephen.berman@gmx.net>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 36af2d5c44 upstream.
Commit 8765c5ba19 ("ACPI / scan: Rework modalias creation when
"compatible" is present") may create two "MODALIAS=" in one uevent
file if specific conditions are met.
This breaks systemd-udevd, which assumes each "key" in one uevent file
to be unique. The internal implementation of systemd-udevd overwrites
the first MODALIAS with the second one, so its kmod rule doesn't load
the driver for the first MODALIAS.
So if both the ACPI modalias and the OF modalias are present, use the
latter to ensure that there will be only one MODALIAS.
Link: https://github.com/systemd/systemd/pull/18163
Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Fixes: 8765c5ba19 ("ACPI / scan: Rework modalias creation when "compatible" is present")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: 4.1+ <stable@vger.kernel.org> # 4.1+
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9cbbb80e3 upstream.
It turns out that the vfs_iocb_iter_{read,write}() functions are
entirely broken, and don't actually use the passed-in file pointer for
IO - only for the preparatory work (permission checking and for the
write_iter function lookup).
That worked fine for overlayfs, which always builds the new iocb with
the same file pointer that it passes in, but in the general case it ends
up doing nonsensical things (and could cause an iterator call that
doesn't even match the passed-in file pointer).
This subtly broke the tty conversion to write_iter in commit
9bb48c82ac ("tty: implement write_iter"), because the console
redirection didn't actually end up redirecting anything, since the
passed-in file pointer was basically ignored, and the actual write was
done with the original non-redirected console tty after all.
The main visible effect of this is that the console messages were no
longer logged to /var/log/boot.log during graphical boot.
Fix the issue by simply not using the vfs write "helper" function at
all, and just redirecting the write entirely internally to the tty
layer. Do the target writability permission checks when actually
registering the target tty with TIOCCONS instead of at write time.
Fixes: 9bb48c82ac ("tty: implement write_iter")
Reported-and-tested-by: Hans de Goede <hdegoede@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b98e762e3d upstream.
When setting up a device, we can krealloc the config->socks array to add
new sockets to the configuration. However if we happen to get a IO
request in at this point even though we aren't setup we could hit a UAF,
as we deref config->socks without any locking, assuming that the
configuration was setup already and that ->socks is safe to access it as
we have a reference on the configuration.
But there's nothing really preventing IO from occurring at this point of
the device setup, we don't want to incur the overhead of a lock to
access ->socks when it will never change while the device is running.
To fix this UAF scenario simply freeze the queue if we are adding
sockets. This will protect us from this particular case without adding
any additional overhead for the normal running case.
Cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f0e386ee0c upstream.
Before the commit 896fbe20b4 ("printk: use the lockless
ringbuffer"), msg_print_text() would only write up to size-1 bytes
into the provided buffer. Some callers expect this behavior and
append a terminator to returned string. In particular:
arch/powerpc/xmon/xmon.c:dump_log_buf()
arch/um/kernel/kmsg_dump.c:kmsg_dumper_stdout()
msg_print_text() has been replaced by record_print_text(), which
currently fills the full size of the buffer. This causes a
buffer overflow for the above callers.
Change record_print_text() so that it will only use size-1 bytes
for text data. Also, for paranoia sakes, add a terminator after
the text data.
And finally, document this behavior so that it is clear that only
size-1 bytes are used and a terminator is added.
Fixes: 896fbe20b4 ("printk: use the lockless ringbuffer")
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210114170412.4819-1-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
