[ Upstream commit f66af9f222 ]
In emulation of writing to cr8, one of the lowest four bits in TPR[3:0]
is kept.
According to Intel SDM 10.8.6.1(baremetal scenario):
"APIC.TPR[bits 7:4] = CR8[bits 3:0], APIC.TPR[bits 3:0] = 0";
and SDM 28.3(use TPR shadow):
"MOV to CR8. The instruction stores bits 3:0 of its source operand into
bits 7:4 of VTPR; the remainder of VTPR (bits 3:0 and bits 31:8) are
cleared.";
and AMD's APM 16.6.4:
"Task Priority Sub-class (TPS)-Bits 3 : 0. The TPS field indicates the
current sub-priority to be used when arbitrating lowest-priority messages.
This field is written with zero when TPR is written using the architectural
CR8 register.";
so in KVM emulated scenario, clear TPR[3:0] to make a consistent behavior
as in other scenarios.
This doesn't impact evaluation and delivery of pending virtual interrupts
because processor does not use the processor-priority sub-class to
determine which interrupts to delivery and which to inhibit.
Sub-class is used by hardware to arbitrate lowest priority interrupts,
but KVM just does a round-robin style delivery.
Fixes: b93463aa59 ("KVM: Accelerated apic support")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220210094506.20181-1-zhenzhong.duan@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2863dd2db2 ]
When CONFIG_GENERIC_CPU=y (true for all our defconfigs) we pass
-mcpu=powerpc64 to the compiler, even when we're building a 32-bit
kernel.
This happens because we have an ifdef CONFIG_PPC_BOOK3S_64/else block in
the Makefile that was written before 32-bit supported GENERIC_CPU. Prior
to that the else block only applied to 64-bit Book3E.
The GCC man page says -mcpu=powerpc64 "[specifies] a pure ... 64-bit big
endian PowerPC ... architecture machine [type], with an appropriate,
generic processor model assumed for scheduling purposes."
It's unclear how that interacts with -m32, which we are also passing,
although obviously -m32 is taking precedence in some sense, as the
32-bit kernel only contains 32-bit instructions.
This was noticed by inspection, not via any bug reports, but it does
affect code generation. Comparing before/after code generation, there
are some changes to instruction scheduling, and the after case (with
-mcpu=powerpc64 removed) the compiler seems more keen to use r8.
Fix it by making the else case only apply to Book3E 64, which excludes
32-bit.
Fixes: 0e00a8c9fd ("powerpc: Allow CPU selection also on PPC32")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220215112858.304779-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 749ed4a206 ]
Executing node_set_online() when nid = NUMA_NO_NODE results in an
undefined behavior. node_set_online() will call node_set_state(), into
__node_set(), into set_bit(), and since NUMA_NO_NODE is -1 we'll end up
doing a negative shift operation inside
arch/powerpc/include/asm/bitops.h. This potential UB was detected
running a kernel with CONFIG_UBSAN.
The behavior was introduced by commit 10f78fd0da ("powerpc/numa: Fix a
regression on memoryless node 0"), where the check for nid > 0 was
removed to fix a problem that was happening with nid = 0, but the result
is that now we're trying to online NUMA_NO_NODE nids as well.
Checking for nid >= 0 will allow node 0 to be onlined while avoiding
this UB with NUMA_NO_NODE.
Fixes: 10f78fd0da ("powerpc/numa: Fix a regression on memoryless node 0")
Reported-by: Ping Fang <pifang@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220224182312.1012527-1-danielhb413@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4226961b00 ]
Currently if a declaration appears in the BTF before the definition, the
definition is dumped as a conflicting name, e.g.:
$ bpftool btf dump file vmlinux format raw | grep "'unix_sock'"
[81287] FWD 'unix_sock' fwd_kind=struct
[89336] STRUCT 'unix_sock' size=1024 vlen=14
$ bpftool btf dump file vmlinux format c | grep "struct unix_sock"
struct unix_sock;
struct unix_sock___2 { <--- conflict, the "___2" is unexpected
struct unix_sock___2 *unix_sk;
This causes a compilation error if the dump output is used as a header file.
Fix it by skipping declaration when counting duplicated type names.
Fixes: 351131b51c ("libbpf: add btf_dump API for BTF-to-C conversion")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220301053250.1464204-2-xukuohai@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b200189626 ]
Using PCI_FUNC macro in a VM, when the device is in passthrough mode does
not provide the real function instance. This means that currently, devices
will not probe unless the instance in the VM matches the instance in the
host.
Fix this by getting the pf_id from the LAN during the probe.
Fixes: 8498a30e1b ("RDMA/irdma: Register auxiliary driver and implement private channel OPs")
Link: https://lore.kernel.org/r/20220225163211.127-3-shiraz.saleem@intel.com
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18b1ab7aa7 ]
Fix a race in the xsk socket teardown code that can lead to a NULL pointer
dereference splat. The current xsk unbind code in xsk_unbind_dev() starts by
setting xs->state to XSK_UNBOUND, sets xs->dev to NULL and then waits for any
NAPI processing to terminate using synchronize_net(). After that, the release
code starts to tear down the socket state and free allocated memory.
BUG: kernel NULL pointer dereference, address: 00000000000000c0
PGD 8000000932469067 P4D 8000000932469067 PUD 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 25 PID: 69132 Comm: grpcpp_sync_ser Tainted: G I 5.16.0+ #2
Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.2.10 03/09/2015
RIP: 0010:__xsk_sendmsg+0x2c/0x690
[...]
RSP: 0018:ffffa2348bd13d50 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000040 RCX: ffff8d5fc632d258
RDX: 0000000000400000 RSI: ffffa2348bd13e10 RDI: ffff8d5fc5489800
RBP: ffffa2348bd13db0 R08: 0000000000000000 R09: 00007ffffffff000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8d5fc5489800
R13: ffff8d5fcb0f5140 R14: ffff8d5fcb0f5140 R15: 0000000000000000
FS: 00007f991cff9400(0000) GS:ffff8d6f1f700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000c0 CR3: 0000000114888005 CR4: 00000000001706e0
Call Trace:
<TASK>
? aa_sk_perm+0x43/0x1b0
xsk_sendmsg+0xf0/0x110
sock_sendmsg+0x65/0x70
__sys_sendto+0x113/0x190
? debug_smp_processor_id+0x17/0x20
? fpregs_assert_state_consistent+0x23/0x50
? exit_to_user_mode_prepare+0xa5/0x1d0
__x64_sys_sendto+0x29/0x30
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
There are two problems with the current code. First, setting xs->dev to NULL
before waiting for all users to stop using the socket is not correct. The
entry to the data plane functions xsk_poll(), xsk_sendmsg(), and xsk_recvmsg()
are all guarded by a test that xs->state is in the state XSK_BOUND and if not,
it returns right away. But one process might have passed this test but still
have not gotten to the point in which it uses xs->dev in the code. In this
interim, a second process executing xsk_unbind_dev() might have set xs->dev to
NULL which will lead to a crash for the first process. The solution here is
just to get rid of this NULL assignment since it is not used anymore. Before
commit 42fddcc7c6 ("xsk: use state member for socket synchronization"),
xs->dev was the gatekeeper to admit processes into the data plane functions,
but it was replaced with the state variable xs->state in the aforementioned
commit.
The second problem is that synchronize_net() does not wait for any process in
xsk_poll(), xsk_sendmsg(), or xsk_recvmsg() to complete, which means that the
state they rely on might be cleaned up prematurely. This can happen when the
notifier gets called (at driver unload for example) as it uses xsk_unbind_dev().
Solve this by extending the RCU critical region from just the ndo_xsk_wakeup
to the whole functions mentioned above, so that both the test of xs->state ==
XSK_BOUND and the last use of any member of xs is covered by the RCU critical
section. This will guarantee that when synchronize_net() completes, there will
be no processes left executing xsk_poll(), xsk_sendmsg(), or xsk_recvmsg() and
state can be cleaned up safely. Note that we need to drop the RCU lock for the
skb xmit path as it uses functions that might sleep. Due to this, we have to
retest the xs->state after we grab the mutex that protects the skb xmit code
from, among a number of things, an xsk_unbind_dev() being executed from the
notifier at the same time.
Fixes: 42fddcc7c6 ("xsk: use state member for socket synchronization")
Reported-by: Elza Mathew <elza.mathew@intel.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20220228094552.10134-1-magnus.karlsson@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dda7596c10 ]
insn_to_jit_off passed to bpf_prog_fill_jited_linfo() is calculated in
instruction granularity instead of bytes granularity, but BPF line info
requires byte offset.
bpf_prog_fill_jited_linfo() will be the last user of ctx.offset before
it is freed, so convert the offset into byte-offset before calling into
bpf_prog_fill_jited_linfo() in order to fix the line info dump on arm64.
Fixes: 37ab566c17 ("bpf: arm64: Enable arm64 jit to provide bpf_line_info")
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220226121906.5709-3-houtao1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f7731754fd ]
The datasheet says that the BQ24190_REG_POC_CHG_CONFIG bits can
have a value of either 10(0x2) or 11(0x3) for OTG (5V boost regulator)
mode.
Sofar bq24190_vbus_is_enabled() was only checking for 10 but some BIOS-es
uses 11 when enabling the regulator at boot.
Make bq24190_vbus_is_enabled() also check for 11 so that it does not
wrongly returns false when the bits are set to 11.
Fixes: 66b6bef2c4 ("power: supply: bq24190_charger: Export 5V boost converter as regulator")
Cc: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 221e3638fe ]
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore. Add put_device() call to fix this.
Fixes: e94236cde4 ("drm/tegra: dsi: Add ganged mode support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50b3a81899 ]
We need to calculate the max file size accurately if the total blocks
that can address by block tree exceed the upper_limit. But this check is
not correct now, it only compute the total data blocks but missing
metadata blocks are needed. So in the case of "data blocks < upper_limit
&& total blocks > upper_limit", we will get wrong result. Fortunately,
this case could not happen in reality, but it's confused and better to
correct the computing.
bits data blocks metadatablocks upper_limit
10 16843020 66051 2147483647
11 134480396 263171 1073741823
12 1074791436 1050627 536870911 (*)
13 8594130956 4198403 268435455 (*)
14 68736258060 16785411 134217727 (*)
15 549822930956 67125251 67108863 (*)
16 4398314962956 268468227 33554431 (*)
[*] Need to calculate in depth.
Fixes: 1c2d14212b ("ext2: Fix underflow in ext2_max_size()")
Link: https://lore.kernel.org/r/20220212050532.179055-1-yi.zhang@huawei.com
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de85193cff ]
This driver can use an interrupt or polling in order get the charger's
status.
When using polling, a delayed work is used.
However, the remove() function unconditionally call
cancel_delayed_work_sync(), even if the delayed work is not used and is not
initialized.
In order to fix it, use devm_delayed_work_autocancel() and remove the now
useless remove() function.
Fixes: feb583e37f ("power: supply: add sbs-charger driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39844b7e30 ]
__setup() handlers should return 1 if the parameter is handled.
Returning 0 causes the entire string to be added to init's
environment strings (limited to 32 strings), unnecessarily polluting it.
Using the documented strings "TOMOYO_loader=string1" and
"TOMOYO_trigger=string2" causes an Unknown parameter message:
Unknown kernel command line parameters
"BOOT_IMAGE=/boot/bzImage-517rc5 TOMOYO_loader=string1 \
TOMOYO_trigger=string2", will be passed to user space.
and these strings are added to init's environment string space:
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc5
TOMOYO_loader=string1
TOMOYO_trigger=string2
With this change, these __setup handlers act as expected,
and init's environment is not polluted with these strings.
Fixes: 0e4ae0e0de ("TOMOYO: Make several options configurable.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: https://lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Cc: James Morris <jmorris@namei.org>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: tomoyo-dev-en@lists.osdn.me
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d6736c3e1 ]
NCQ NON DATA is an NCQ command with the DMA_NONE DMA direction and so a
register-device-to-host-FIS response is expected for it.
However, for an IO_SUCCESS case, mpi_sata_completion() expects a
set-device-bits-FIS for any ata task with an use_ncq field true, which
includes NCQ NON DATA commands.
Fix this to correctly treat NCQ NON DATA commands as non-data by also
testing for the DMA_NONE DMA direction.
Link: https://lore.kernel.org/r/20220220031810.738362-16-damien.lemoal@opensource.wdc.com
Fixes: dbf9bfe615 ("[SCSI] pm8001: add SAS/SATA HBA driver")
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa028141ab ]
In the pm8001_chip_sata_req() and pm80xx_chip_sata_req() functions, all
tasks with a DMA direction of DMA_NONE (no data transfer) are initialized
using the ATAP value 0x04. However, NCQ NON DATA commands, while being
DMA_NONE commands are NCQ commands and need to be initialized using the
value 0x07 for ATAP, similarly to other NCQ commands.
Make sure that NCQ NON DATA command tasks are initialized similarly to
other NCQ commands by also testing the task "use_ncq" field in addition to
the DMA direction. While at it, reorganize the code into a chain of if -
else if - else to avoid useless affectations and debug messages.
Link: https://lore.kernel.org/r/20220220031810.738362-15-damien.lemoal@opensource.wdc.com
Fixes: dbf9bfe615 ("[SCSI] pm8001: add SAS/SATA HBA driver")
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd6d0e3762 ]
Make sure that the __le32 fields of struct sata_cmd are manipulated after
applying the correct endian conversion. That is, use cpu_to_le32() for
assigning values and le32_to_cpu() for consulting a field value. In
particular, make sure that the calculations for the 4G boundary check are
done using CPU endianness and *not* little endian values. With these fixes,
many sparse warnings are removed.
While at it, fix some code identation and add blank lines after variable
declarations and in some other places to make this code more readable.
Link: https://lore.kernel.org/r/20220220031810.738362-12-damien.lemoal@opensource.wdc.com
Fixes: 0ecdf00ba6 ("[SCSI] pm80xx: 4G boundary fix.")
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 970404cc57 ]
Make sure that the __le32 fields of struct ssp_ini_io_start_req are
manipulated after applying the correct endian conversion. That is, use
cpu_to_le32() for assigning values and le32_to_cpu() for consulting a field
value. In particular, make sure that the calculations for the 4G boundary
check are done using CPU endianness and *not* little endian values. With
these fixes, many sparse warnings are removed.
While at it, add blank lines after variable declarations and in some other
places to make this code more readable.
Link: https://lore.kernel.org/r/20220220031810.738362-11-damien.lemoal@opensource.wdc.com
Fixes: 0ecdf00ba6 ("[SCSI] pm80xx: 4G boundary fix.")
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca374f5d92 ]
All fields of the SASProtocolTimerConfig structure have the __le32 type.
As such, use cpu_to_le32() to initialize them. This change suppresses many
sparse warnings:
warning: incorrect type in assignment (different base types)
expected restricted __le32 [addressable] [usertype] pageCode
got int
Note that the check to limit the value of the STP_IDLE_TMO field is removed
as this field is initialized using the fixed (and small) value defined by
the STP_IDLE_TIME macro.
The pm8001_dbg() calls printing the values of the SASProtocolTimerConfig
structure fileds are changed to use le32_to_cpu() to present the values in
human readable form.
Link: https://lore.kernel.org/r/20220220031810.738362-9-damien.lemoal@opensource.wdc.com
Fixes: a6cb3d012b ("[SCSI] pm80xx: thermal, sas controller config and error handling update")
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26a17b12d7 ]
If 'vfio_pci_core_device::needs_pm_restore' is set (PCI device does
not have No_Soft_Reset bit set in its PMCSR config register), then the
current PCI state will be saved locally in
'vfio_pci_core_device::pm_save' during D0->D3hot transition and same
will be restored back during D3hot->D0 transition. For reset-related
functionalities, vfio driver uses PCI reset API's. These
API's internally change the PCI power state back to D0 first if
the device power state is non-D0. This state change to D0 will happen
without the involvement of vfio driver.
Let's consider the following example:
1. The device is in D3hot.
2. User invokes VFIO_DEVICE_RESET ioctl.
3. pci_try_reset_function() will be called which internally
invokes pci_dev_save_and_disable().
4. pci_set_power_state(dev, PCI_D0) will be called first.
5. pci_save_state() will happen then.
Now, for the devices which has NoSoftRst-, the pci_set_power_state()
can trigger soft reset and the original PCI config state will be lost
at step (4) and this state cannot be restored again. This original PCI
state can include any setting which is performed by SBIOS or host
linux kernel (for example LTR, ASPM L1 substates, etc.). When this
soft reset will be triggered, then all these settings will be reset,
and the device state saved at step (5) will also have this setting
cleared so it cannot be restored. Since the vfio driver only exposes
limited PCI capabilities to its user, so the vfio driver user also
won't have the option to save and restore these capabilities state
either and these original settings will be permanently lost.
For pci_reset_bus() also, we can have the above situation.
The other functions/devices can be in D3hot and the reset will change
the power state of all devices to D0 without the involvement of vfio
driver.
So, before calling any reset-related API's, we need to make sure that
the device state is D0. This is mainly to preserve the state around
soft reset.
For vfio_pci_core_disable(), we use __pci_reset_function_locked()
which internally can use pci_pm_reset() for the function reset.
pci_pm_reset() requires the device power state to be in D0, otherwise
it returns error.
This patch changes the device power state to D0 by invoking
vfio_pci_set_power_state() explicitly before calling any reset related
API's.
Fixes: 51ef3a004b ("vfio/pci: Restore device state on PM transition")
Signed-off-by: Abhishek Sahu <abhsahu@nvidia.com>
Link: https://lore.kernel.org/r/20220217122107.22434-3-abhsahu@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eadf88ecf6 ]
If 'vfio_pci_core_device::needs_pm_restore' is set (PCI device does
not have No_Soft_Reset bit set in its PMCSR config register), then
the current PCI state will be saved locally in
'vfio_pci_core_device::pm_save' during D0->D3hot transition and same
will be restored back during D3hot->D0 transition.
For saving the PCI state locally, pci_store_saved_state() is being
used and the pci_load_and_free_saved_state() will free the allocated
memory.
But for reset related IOCTLs, vfio driver calls PCI reset-related
API's which will internally change the PCI power state back to D0. So,
when the guest resumes, then it will get the current state as D0 and it
will skip the call to vfio_pci_set_power_state() for changing the
power state to D0 explicitly. In this case, the memory pointed by
'pm_save' will never be freed. In a malicious sequence, the state changing
to D3hot followed by VFIO_DEVICE_RESET/VFIO_DEVICE_PCI_HOT_RESET can be
run in a loop and it can cause an OOM situation.
This patch frees the earlier allocated memory first before overwriting
'pm_save' to prevent the mentioned memory leak.
Fixes: 51ef3a004b ("vfio/pci: Restore device state on PM transition")
Signed-off-by: Abhishek Sahu <abhsahu@nvidia.com>
Link: https://lore.kernel.org/r/20220217122107.22434-2-abhsahu@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6fc5150438 ]
Explicitly convert unsigned int in the right of the conditional
expression to int to match the left side operand and the return type,
fixing the following compiler warning:
drivers/md/dm-crypt.c:2593:43: warning: signed and unsigned
type in conditional expression [-Wsign-compare]
Fixes: c538f6ec9f ("dm crypt: add ability to use keys from the kernel key retention service")
Signed-off-by: Aashish Sharma <shraash@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a3ee71bd8 ]
All DSI PHY/PLL drivers were referencing their VCO parent clock by a
global name, most of which don't exist or have been renamed. These
clock drivers seem to function fine without that except the 14nm driver
for sdm6xx [1].
At the same time all DTs provide a "ref" clock as per the requirements
of dsi-phy-common.yaml, but the clock is never used. This patchset puts
that clock to use without relying on a global clock name, so that all
dependencies are explicitly defined in DT (the firmware) in the end.
Note that this patch intentionally breaks older firmware (DT) that
relies on the clock to be found globally instead. The only affected
platform is msm8974 [2] for whose dsi_phy_28nm a .name="xo" fallback is
left in place to accommodate a more graceful transition period. All
other platforms had the "ref" clock added to their phy node since its
inception, or in a followup patch some time after. These patches
wrongly assumed that the "ref" clock was actively used and have hence
been listed as "Fixes:" below.
Furthermore apq8064 was providing the wrong 19.2MHz cxo instead of
27MHz pxo clock, which has been addressed in [3].
It is expected that both [2] and [3] are applied to the tree well in
advance of this patch such that any actual breakage is extremely
unlikely, but might still occur if kernel upgrades are performed without
the DT to match. After some time the fallback for msm8974 can be
removed again as well.
[1]: https://lore.kernel.org/linux-arm-msm/386db1a6-a1cd-3c7d-a88e-dc83f8a1be96@somainline.org/
[2]: https://lore.kernel.org/linux-arm-msm/20210830175739.143401-1-marijn.suijten@somainline.org/
[3]: https://lore.kernel.org/linux-arm-msm/20210829203027.276143-2-marijn.suijten@somainline.org/
Fixes: 79e51645a1 ("arm64: dts: qcom: msm8916: Set 'xo_board' as ref clock of the DSI PHY")
Fixes: 6969d1d9c6 ("ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY")
Fixes: 0c0e72705a ("arm64: dts: sdm845: Set 'bi_tcxo' as ref clock of the DSI PHYs")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210911131922.387964-2-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9051d629db ]
Each DP link training contains link training 1 followed by link
training 2. There is maximum of 5 retries of DP link training
before declared link training failed. It is required to stop link
training at end of link training 2 if it is failed so that next
link training 1 can start freshly. This patch fixes link compliance
test case 4.3.1.13 (Source Device Link Training EQ Fallback Test).
Changes in v10:
-- group into one series
Changes in v11:
-- drop drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read
Fixes: 2e0adc765d ("drm/msm/dp: do not end dp link training until video is ready")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1642531648-8448-5-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e602f5156 ]
DP CTS test case 4.2.2.6 has valid edid with bad checksum on purpose
and expect DP source return correct checksum. During drm edid read,
correct edid checksum is calculated and stored at
connector::real_edid_checksum.
The problem is struct dp_panel::connector never be assigned, instead the
connector is stored in struct msm_dp::connector. When we run compliance
testing test case 4.2.2.6 dp_panel_handle_sink_request() won't have a valid
edid set in struct dp_panel::edid so we'll try to use the connectors
real_edid_checksum and hit a NULL pointer dereference error because the
connector pointer is never assigned.
Changes in V2:
-- populate panel connector at msm_dp_modeset_init() instead of at dp_panel_read_sink_caps()
Changes in V3:
-- remove unhelpful kernel crash trace commit text
-- remove renaming dp_display parameter to dp
Changes in V4:
-- add more details to commit text
Changes in v10:
-- group into one series
Changes in v11:
-- drop drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read
Fixes: 7948fe12d4 ("drm/msm/dp: return correct edid checksum after corrupted edid checksum read")
Signee-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1642531648-8448-3-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30d17c12b0 ]
The recent fix for NULL sta in iwl_mvm_get_tx_rate() still has a call
of iwl_mvm_sta_from_mac80211() that may be called with NULL sta.
Although this practically only points to the address and the actual
access doesn't happen due to the conditional evaluation at a later
point, it looks a bit flaky.
This patch drops the temporary variable above and evaluates
iwm_mvm_sta_from_mac80211() directly for avoiding confusions.
Fixes: d599f714b7 ("iwlwifi: mvm: don't crash on invalid rate w/o STA")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220121114024.10454-1-tiwai@suse.de
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24720d7452 ]
This patch added the data checksum error mib counters check for the
script mptcp_connect.sh when the data checksum is enabled.
In do_transfer(), got the mib counters twice, before and after running
the mptcp_connect commands. The latter minus the former is the actual
number of the data checksum mib counter.
The output looks like this:
ns1 MPTCP -> ns2 (dead:beef:1::2:10007) MPTCP (duration 86ms) [ OK ]
ns1 MPTCP -> ns2 (10.0.2.1:10008 ) MPTCP (duration 66ms) [ FAIL ]
server got 1 data checksum error[s]
Fixes: 94d66ba1d8 ("selftests: mptcp: enable checksum in mptcp_connect.sh")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/255
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
