[ Upstream commit ee63291aa8287cb7ded767d340155fe8681fc075 ]
struct pt_regs is hard to read because the member or section related
comments are not aligned with the members.
The 'cs' and 'ss' members of pt_regs are type of 'unsigned long' while
in reality they are only 16-bit wide. This works so far as the
remaining space is unused, but FRED will use the remaining bits for
other purposes.
To prepare for FRED:
- Cleanup the formatting
- Convert 'cs' and 'ss' to u16 and embed them into an union
with a u64
- Fixup the related printk() format strings
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Originally-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-14-xin3.li@intel.com
Stable-dep-of: dc81e556f2a0 ("x86/fred: Clear WFE in missing-ENDBRANCH #CPs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3b78b470f28bb2a3a40e88bdf5c6de6a35a9b76 ]
HiSilicon HIP10/11 platforms using the same SMMU PMCG with HIP09
and thus suffers the same erratum. List them in the PMCG platform
information list without introducing a new SMMU PMCG Model.
Update the silicon-errata.rst as well.
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240731092658.11012-1-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Stable-dep-of: c2b46ae02270 ("ACPI/IORT: Add PMCG platform information for HiSilicon HIP09A")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e29e504e7890b9ee438ca6370d0180d607c473f9 ]
Since the legacy rawmidi has no proper way to know the inactive group,
indicate it in the rawmidi substream names with "[Inactive]" suffix
when the corresponding UMP group is inactive.
Link: https://patch.msgid.link/20241129094546.32119-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3978d53df7236f0a517c2abeb43ddf6ac162cdd8 ]
When a UMP Group is inactive, we shouldn't allow users to access it
via the legacy MIDI access. Add the group active flag check and
return -ENODEV if it's inactive.
Link: https://patch.msgid.link/20241129094546.32119-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 631896f7eaaf8cf8c639b065d3c9fbaa66da5d32 ]
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-2-tiwai@suse.de
Stable-dep-of: 3978d53df723 ("ALSA: ump: Don't open legacy substream for an inactive group")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6756af923e06aa33ad8894aaecbf9060953ba00f ]
During rename, we are updating link counts of various inodes either when
rename deletes target or when moving directory across directories.
Verify involved link counts are sane so that we don't trip warnings in
VFS.
Reported-by: syzbot+3ff7365dc04a6bcafa66@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d35cebb794bb7be93db76c3383979c7deacfef9 ]
We can't really afford locking the source on same-directory rename;
currently vfs_rename() tries to do that, but it will have to be
changed. The logics in udf_rename() is lazy and goes looking for
".." in source even in same-directory case. It's not hard to get
rid of that, leaving that behaviour only for cross-directory case;
that VFS can get locks safely (and will keep doing that after the
coming changes).
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Stable-dep-of: 6756af923e06 ("udf: Verify inode link counts before performing rename")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bad201b2ac4e238c6d4b6966a220240e3861640c ]
On RZ/G3S the watchdog can be part of a software-controlled PM domain. In
this case, the watchdog device need to be powered on in
struct watchdog_ops::restart API. This can be done though
pm_runtime_resume_and_get() API if the watchdog PM domain and watchdog
device are marked as IRQ safe. We mark the watchdog PM domain as IRQ safe
with GENPD_FLAG_IRQ_SAFE when the watchdog PM domain is registered and the
watchdog device though pm_runtime_irq_safe().
Before commit e4cf89596c ("watchdog: rzg2l_wdt: Fix 'BUG: Invalid wait
context'") pm_runtime_get_sync() was used in watchdog restart handler
(which is similar to pm_runtime_resume_and_get() except the later one
handles the runtime resume errors).
Commit e4cf89596c ("watchdog: rzg2l_wdt: Fix 'BUG: Invalid wait
context'") dropped the pm_runtime_get_sync() and replaced it with
clk_prepare_enable() to avoid invalid wait context due to genpd_lock()
in genpd_runtime_resume() being called from atomic context. But
clk_prepare_enable() doesn't fit for this either (as reported by
Ulf Hansson) as clk_prepare() can also sleep (it just not throw invalid
wait context warning as it is not written for this).
Because the watchdog device is marked now as IRQ safe (though this patch)
the irq_safe_dev_in_sleep_domain() call from genpd_runtime_resume() returns
1 for devices not registering an IRQ safe PM domain for watchdog (as the
watchdog device is IRQ safe, PM domain is not and watchdog PM domain is
always-on), this being the case for RZ/G3S with old device trees and
the rest of the SoCs that use this driver, we can now drop also the
clk_prepare_enable() calls in restart handler and rely on
pm_runtime_resume_and_get().
Thus, drop clk_prepare_enable() and use pm_runtime_resume_and_get() in
watchdog restart handler.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241015164732.4085249-5-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8997ed79ed7c7c32b2ae571e0d99a58bbfd01fe ]
The reset driver has been adapted in commit da235d2fac21
("clk: renesas: rzg2l: Check reset monitor registers") to check the reset
monitor bits before declaring reset asserts/de-asserts as
successful/failure operations. With that, there is no need to keep the
reset workaround for RZ/V2M in place in the watchdog driver.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240531065723.1085423-8-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Stable-dep-of: bad201b2ac4e ("watchdog: rzg2l_wdt: Power on the watchdog domain in the restart handler")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 064319c3fac88e04f53f3460cd24ae90de2d9fb6 ]
There is no need to de-assert the reset signal on probe as the watchdog
is not used prior executing start. Also, the clocks are not enabled in
probe (pm_runtime_enable() doesn't do that), thus this is another indicator
that the watchdog wasn't used previously like this. Instead, keep the
watchdog hardware in its previous state at probe (by default it is in
reset state), enable it when it is started and move it to reset state
when it is stopped. This saves some extra power when the watchdog is
unused.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240531065723.1085423-6-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Stable-dep-of: bad201b2ac4e ("watchdog: rzg2l_wdt: Power on the watchdog domain in the restart handler")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f05e20b989ac33c9c0f8c2028ec0a566493548f ]
A missing or empty dma-ranges in a DT node implies a 1:1 mapping for dma
translations. In this specific case, the current behaviour is to zero out
the entire specifier so that the translation could be carried on as an
offset from zero. This includes address specifier that has flags (e.g.
PCI ranges).
Once the flags portion has been zeroed, the translation chain is broken
since the mapping functions will check the upcoming address specifier
against mismatching flags, always failing the 1:1 mapping and its entire
purpose of always succeeding.
Set to zero only the address portion while passing the flags through.
Fixes: dbbdee9473 ("of/address: Merge all of the bus translation code")
Cc: stable@vger.kernel.org
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Tested-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/e51ae57874e58a9b349c35e2e877425ebc075d7a.1732441813.git.andrea.porta@suse.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88696db08b7efa3b6bb722014ea7429e78f6be32 ]
It is more useful to know how many flags cells a bus has rather than
whether a bus has flags or not as ultimately the number of cells is the
information used. Replace 'has_flags' boolean with 'flag_cells' count.
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20231026135358.3564307-2-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Stable-dep-of: 7f05e20b989a ("of: address: Preserve the flags portion on 1:1 dma-ranges mapping")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3eb030c60835668997d5763b1a0c7938faf169f6 ]
The recently added of_bus_default_flags_translate() performs the exact
same operation as of_bus_pci_translate() and of_bus_isa_translate().
Avoid duplicated code replacing both of_bus_pci_translate() and
of_bus_isa_translate() with of_bus_default_flags_translate().
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20231017110221.189299-3-herve.codina@bootlin.com
Signed-off-by: Rob Herring <robh@kernel.org>
Stable-dep-of: 7f05e20b989a ("of: address: Preserve the flags portion on 1:1 dma-ranges mapping")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bcc80dec91ee745b3d66f3e48f0ec2efdea97149 ]
read_hv_sched_clock_tsc() assumes that the Hyper-V clock counter is
bigger than the variable hv_sched_clock_offset, which is cached during
early boot, but depending on the timing this assumption may be false
when a hibernated VM starts again (the clock counter starts from 0
again) and is resuming back (Note: hv_init_tsc_clocksource() is not
called during hibernation/resume); consequently,
read_hv_sched_clock_tsc() may return a negative integer (which is
interpreted as a huge positive integer since the return type is u64)
and new kernel messages are prefixed with huge timestamps before
read_hv_sched_clock_tsc() grows big enough (which typically takes
several seconds).
Fix the issue by saving the Hyper-V clock counter just before the
suspend, and using it to correct the hv_sched_clock_offset in
resume. This makes hv tsc page based sched_clock continuous and ensures
that post resume, it starts from where it left off during suspend.
Override x86_platform.save_sched_clock_state and
x86_platform.restore_sched_clock_state routines to correct this as soon
as possible.
Note: if Invariant TSC is available, the issue doesn't happen because
1) we don't register read_hv_sched_clock_tsc() for sched clock:
See commit e5313f1c54 ("clocksource/drivers/hyper-v: Rework
clocksource and sched clock setup");
2) the common x86 code adjusts TSC similarly: see
__restore_processor_state() -> tsc_verify_tsc_adjust(true) and
x86_platform.restore_sched_clock_state().
Cc: stable@vger.kernel.org
Fixes: 1349401ff1 ("clocksource/drivers/hyper-v: Suspend/resume Hyper-V clocksource for hibernation")
Co-developed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20240917053917.76787-1-namjain@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240917053917.76787-1-namjain@linux.microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8644b48714dca8bf2f42a4ff8311de8efc9bd8c3 ]
Intel Panther Lake-M/P has the same integrated Thunderbolt/USB4
controller as Lunar Lake. Add these PCI IDs to the driver list of
supported devices.
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2cd3da4e37453019e21a486d9de3144f46b4fdf7 ]
Intel Lunar Lake has similar integrated Thunderbolt/USB4 controller as
Intel Meteor Lake with some small differences in the host router (it has
3 DP IN adapters for instance). Add the Intel Lunar Lake PCI IDs to the
driver list of supported devices.
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Stable-dep-of: 8644b48714dc ("thunderbolt: Add support for Intel Panther Lake-M/P")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e21ebe51af688eb98fd6269240212a3c7300deea ]
xHC hosts from several vendors have the same issue where endpoints start
so slowly that a later queued 'Stop Endpoint' command may complete before
endpoint is up and running.
The 'Stop Endpoint' command fails with context state error as the endpoint
still appears as stopped.
See commit 42b758137601 ("usb: xhci: Limit Stop Endpoint retries") for
details
CC: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20241217102122.2316814-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42b7581376015c1bbcbe5831f043cd0ac119d028 ]
Some host controllers fail to atomically transition an endpoint to the
Running state on a doorbell ring and enter a hidden "Restarting" state,
which looks very much like Stopped, with the important difference that
it will spontaneously transition to Running anytime soon.
A Stop Endpoint command queued in the Restarting state typically fails
with Context State Error and the completion handler sees the Endpoint
Context State as either still Stopped or already Running. Even a case
of Halted was observed, when an error occurred right after the restart.
The Halted state is already recovered from by resetting the endpoint.
The Running state is handled by retrying Stop Endpoint.
The Stopped state was recognized as a problem on NEC controllers and
worked around also by retrying, because the endpoint soon restarts and
then stops for good. But there is a risk: the command may fail if the
endpoint is "stopped for good" already, and retries will fail forever.
The possibility of this was not realized at the time, but a number of
cases were discovered later and reproduced. Some proved difficult to
deal with, and it is outright impossible to predict if an endpoint may
fail to ever start at all due to a hardware bug. One such bug (albeit
on ASM3142, not on NEC) was found to be reliably triggered simply by
toggling an AX88179 NIC up/down in a tight loop for a few seconds.
An endless retries storm is quite nasty. Besides putting needless load
on the xHC and CPU, it causes URBs never to be given back, paralyzing
the device and connection/disconnection logic for the whole bus if the
device is unplugged. User processes waiting for URBs become unkillable,
drivers and kworker threads lock up and xhci_hcd cannot be reloaded.
For peace of mind, impose a timeout on Stop Endpoint retries in this
case. If they don't succeed in 100ms, consider the endpoint stopped
permanently for some reason and just give back the unlinked URBs. This
failure case is rare already and work is under way to make it rarer.
Start this work today by also handling one simple case of race with
Reset Endpoint, because it costs just two lines to implement.
Fixes: fd9d55d190c0 ("xhci: retry Stop Endpoint on buggy NEC controllers")
CC: stable@vger.kernel.org
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20241106101459.775897-32-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: e21ebe51af68 ("xhci: Turn NEC specific quirk for handling Stop Endpoint errors generic")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd9d55d190c0e5fefd3a9165ea361809427885a1 ]
Two NEC uPD720200 adapters have been observed to randomly misbehave:
a Stop Endpoint command fails with Context Error, the Output Context
indicates Stopped state, and the endpoint keeps running. Very often,
Set TR Dequeue Pointer is seen to fail next with Context Error too,
in addition to problems from unexpectedly completed cancelled work.
The pathology is common on fast running isoc endpoints like uvcvideo,
but has also been reproduced on a full-speed bulk endpoint of pl2303.
It seems all EPs are affected, with risk proportional to their load.
Reproduction involves receiving any kind of stream and closing it to
make the device driver cancel URBs already queued in advance.
Deal with it by retrying the command like in the Running state.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240229141438.619372-8-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: e21ebe51af68 ("xhci: Turn NEC specific quirk for handling Stop Endpoint errors generic")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5cb099902b6b6292b3a85ffa1bb844e0ba195945 ]
When sending frame split into multiple descriptors, hardware processes
descriptors one by one, including writing back DT values. The first
descriptor could be already marked as completed when processing of
next descriptors for the same frame is still in progress.
Although only the last descriptor is configured to generate interrupt,
completion of the first descriptor could be noticed by the driver when
handling interrupt for the previous frame.
Currently, driver stores skb in the entry that corresponds to the first
descriptor. This results into skb could be unmapped and freed when
hardware did not complete the send yet. This opens a window for
corrupting the data being sent.
Fix this by saving skb in the entry that corresponds to the last
descriptor used to send the frame.
Fixes: d2c96b9d5f83 ("net: rswitch: Add jumbo frames handling for TX")
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://patch.msgid.link/20241208095004.69468-2-nikita.yoush@cogentembedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6675ce20046d149e1e1ffe7e9577947dee17aad5 ]
do_softirq_post_smp_call_flush() on PREEMPT_RT kernels carries a
WARN_ON_ONCE() for any SOFTIRQ being raised from an SMP-call-function.
Since do_softirq_post_smp_call_flush() is called with preempt disabled,
raising a SOFTIRQ during flush_smp_call_function_queue() can lead to
longer preempt disabled sections.
Since commit b2a02fc43a ("smp: Optimize
send_call_function_single_ipi()") IPIs to an idle CPU in
TIF_POLLING_NRFLAG mode can be optimized out by instead setting
TIF_NEED_RESCHED bit in idle task's thread_info and relying on the
flush_smp_call_function_queue() in the idle-exit path to run the
SMP-call-function.
To trigger an idle load balancing, the scheduler queues
nohz_csd_function() responsible for triggering an idle load balancing on
a target nohz idle CPU and sends an IPI. Only now, this IPI is optimized
out and the SMP-call-function is executed from
flush_smp_call_function_queue() in do_idle() which can raise a
SCHED_SOFTIRQ to trigger the balancing.
So far, this went undetected since, the need_resched() check in
nohz_csd_function() would make it bail out of idle load balancing early
as the idle thread does not clear TIF_POLLING_NRFLAG before calling
flush_smp_call_function_queue(). The need_resched() check was added with
the intent to catch a new task wakeup, however, it has recently
discovered to be unnecessary and will be removed in the subsequent
commit after which nohz_csd_function() can raise a SCHED_SOFTIRQ from
flush_smp_call_function_queue() to trigger an idle load balance on an
idle target in TIF_POLLING_NRFLAG mode.
nohz_csd_function() bails out early if "idle_cpu()" check for the
target CPU, and does not lock the target CPU's rq until the very end,
once it has found tasks to run on the CPU and will not inhibit the
wakeup of, or running of a newly woken up higher priority task. Account
for this and prevent a WARN_ON_ONCE() when SCHED_SOFTIRQ is raised from
flush_smp_call_function_queue().
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241119054432.6405-2-kprateek.nayak@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84488282166de6b6760ada8030e87aaa08bce3aa ]
This reverts commit d06923670b5a5f609603d4a9fee4dec02d38de9c.
It was realized that the fix implemented to contain the race condition
among the keep alive task and the fabric shutdown code path in the commit
d06923670b5ia ("nvme: make keep-alive synchronous operation") is not
optimal. The reason being keep-alive runs under the workqueue and making
it synchronous would waste a workqueue context.
Furthermore, we later found that the above race condition is a regression
caused due to the changes implemented in commit a54a93d0e359 ("nvme: move
stopping keep-alive into nvme_uninit_ctrl()"). So we decided to revert the
commit d06923670b5a ("nvme: make keep-alive synchronous operation") and
then fix the regression.
Link: https://lore.kernel.org/all/196f4013-3bbf-43ff-98b4-9cb2a96c20c2@grimberg.me/
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 599d9f3a10eec69ef28a90161763e4bd7c9c02bf ]
We no more need acquiring ctrl->lock before accessing the
NVMe controller state and instead we can now use the helper
nvme_ctrl_state. So replace the use of ctrl->lock from
nvme_keep_alive_finish function with nvme_ctrl_state call.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Stable-dep-of: 84488282166d ("Revert "nvme: make keep-alive synchronous operation"")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76716fd5bf09725c2c6825264147f16c21e56853 ]
To simplify the platform code move Type-C orientation handling into the
connector_status callback. As it is called both during connector
registration and on connector change events, duplicated code from
pmic_glink_ucsi_register() can be dropped.
Also this moves operations that can sleep into a worker thread,
removing the only sleeping operation from pmic_glink_ucsi_notify().
Tested-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogeurs@linux.intel.com>
Link: https://lore.kernel.org/r/20240411-ucsi-orient-aware-v2-2-d4b1cb22a33f@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: de9df030ccb5 ("usb: typec: ucsi: glink: be more precise on orientation-aware ports")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24bce22d09ec8e67022aab9a888acb56fb7a996a ]
Allow UCSI glue driver to perform addtional work to update connector
status. For example, it might check the cable orientation. This call is
performed after reading new connector statatus, so the platform driver
can peek at new connection status bits.
The callback is called both when registering the port and when the
connector change event is being handled.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240411-ucsi-orient-aware-v2-1-d4b1cb22a33f@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: de9df030ccb5 ("usb: typec: ucsi: glink: be more precise on orientation-aware ports")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca8d18aa7b0f22d66a3ca9a90d8f73431b8eca89 ]
To let the device controller work properly on short packet limitations,
one usb request should only correspond to one dTD. Then every dTD will
set IOC. In theory, each dTD support up to 20KB data transfer if the
offset is 0. Due to we cannot predetermine the offset, this will limit
the usb request length to max 16KB. This should be fine since most of
the user transfer data based on this size policy.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20240923081203.2851768-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec841b8d73cff37f8960e209017efe1eb2fb21f2 ]
Currently, the imx deivice controller has below limitations:
1. can't generate short packet interrupt if IOC not set in dTD. So if one
request span more than one dTDs and only the last dTD set IOC, the usb
request will pending there if no more data comes.
2. the controller can't accurately deliver data to differtent usb requests
in some cases due to short packet. For example: one usb request span 3
dTDs, then if the controller received a short packet the next packet
will go to 2nd dTD of current request rather than the first dTD of next
request.
3. can't build a bus packet use multiple dTDs. For example: controller
needs to send one packet of 512 bytes use dTD1 (200 bytes) + dTD2
(312 bytes), actually the host side will see 200 bytes short packet.
Based on these limits, add CI_HDRC_HAS_SHORT_PKT_LIMIT flag and use it on
imx platforms.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20240923081203.2851768-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8de60bbab994bf8165d7d10e974872852da47aa7 ]
sc7180 has a dedicated ADSP similar to the one found in sm8250.
Add it's compatible to the driver reusing the existing config so
the devices that use the adsp can probe it.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230907-sc7180-adsp-rproc-v3-2-6515c3fbe0a3@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: 009e288c989b ("remoteproc: qcom: pas: enable SAR2130P audio DSP support")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f9e19f207be0c534d517d65e01417ba968cdd34 ]
Type 4 PCC channels have an option to send back a response
to the platform when they are done processing the request.
The flag to indicate whether or not to respond is inside
the message body, and thus is not available to the pcc
mailbox.
If the flag is not set, still set command completion
bit after processing message.
In order to read the flag, this patch maps the shared
buffer to virtual memory. To avoid duplication of mapping
the shared buffer is then made available to be used by
the driver that uses the mailbox.
Signed-off-by: Adam Young <admiyo@os.amperecomputing.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 55d235ebb684b993b3247740c1c8e273f8af4a54 ]
Define the common macros to use when referring to various bitfields in
the PCC generic communications channel command and status fields.
Currently different drivers that need to use these bitfields have defined
these locally. This common macro is intended to consolidate and replace
those.
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230927-pcc_defines-v2-1-0b8ffeaef2e5@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Stable-dep-of: 7f9e19f207be ("mailbox: pcc: Check before sending MCTP PCC response ACK")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3db174e478cb0bb34888c20a531608b70aec9c1f ]
If the platform acknowledge interrupt is level triggered, then it can
be shared by multiple subspaces provided each one has a unique platform
interrupt ack preserve and ack set masks.
If it can be shared, then we can request the irq with IRQF_SHARED and
IRQF_ONESHOT flags. The first one indicating it can be shared and the
latter one to keep the interrupt disabled until the hardirq handler
finished.
Further, since there is no way to detect if the interrupt is for a given
channel as the interrupt ack preserve and ack set masks are for clearing
the interrupt and not for reading the status(in case Irq Ack register
may be write-only on some platforms), we need a way to identify if the
given channel is in use and expecting the interrupt.
PCC type0, type1 and type5 do not support shared level triggered interrupt.
The methods of determining whether a given channel for remaining types
should respond to an interrupt are as follows:
- type2: Whether the interrupt belongs to a given channel is only
determined by the status field in Generic Communications Channel
Shared Memory Region, which is done in rx_callback of PCC client.
- type3: This channel checks chan_in_use flag first and then checks the
command complete bit(value '1' indicates that the command has
been completed).
- type4: Platform ensure that the default value of the command complete
bit corresponding to the type4 channel is '1'. This command
complete bit is '0' when receive a platform notification.
The new field, 'chan_in_use' is used by the type only support the
communication from OSPM to Platform (like type3) and should be completely
ignored by other types so as to avoid too many type unnecessary checks in
IRQ handler.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/20230801063827.25336-3-lihuisong@huawei.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Stable-dep-of: 7f9e19f207be ("mailbox: pcc: Check before sending MCTP PCC response ACK")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60c40b06fa68694dd08a1a0038ea8b9de3f3b1ca ]
Currently, PCC driver doesn't support the processing of platform
notification for type 4 PCC subspaces.
According to ACPI specification, if platform sends a notification
to OSPM, it must clear the command complete bit and trigger platform
interrupt. OSPM needs to check whether the command complete bit is
cleared, clear platform interrupt, process command, and then set the
command complete and ring doorbell to the Platform.
Let us stash the value of the pcc type and use the same while processing
the interrupt of the channel. We also need to set the command complete
bit and ring doorbell in the interrupt handler for the type 4 channel to
complete the communication flow after processing the notification from
the Platform.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/20230801063827.25336-2-lihuisong@huawei.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Stable-dep-of: 7f9e19f207be ("mailbox: pcc: Check before sending MCTP PCC response ACK")
Signed-off-by: Sasha Levin <sashal@kernel.org>
