the fs raw bit will be cleared by vop2_isr() fs irq and lead to
vop2_wait_for_fs_by_raw_status() time out, so we use
vop2_wait_for_fs_by_done_bit_status() to wait done bit from 1 to 0 is
more reliable.
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Change-Id: Ice35fb9bfe6c2ef7a49496b15b9f58bf93e95d4e
We thought when userspace switch hdmi to hdr mode, it must
give vop a hdr plane, but We meet a case: composer give
vop only one sdr plane, but switch hdmi to hdr mode.
so we don't check the plane number for sdr2hdr_en;
Change-Id: I4804a88321af84328735d6499ac9df610bf2cb85
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
win_mask is more safe than plane_mask on crtc_state,
because crtc_state may changed by many interface.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Change-Id: I886c8e1e1c0505e46292721de05d9be7c167d956
we must make sure the port_mux configuration is take effet
before configure a window that is moved from another VP.
Change-Id: I4ca581292e08ef30cc4b6eb47aef02e678f38a66
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
port_mux register is shared by all the three(four on rk3588)
video ports, and the config done vsync is controlled by
layer_sel_regdone_sel bits.
We must make sure the previous configuration is take
effect, when change port_mux for another vp.
Change-Id: Ic4bd58f52760080f2f264f37cc6f01a9cd58939f
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
There maybe a case a new wb commit is commit when
the last wb has not completed, this may override
the fs_vsync_cnt.
So counter vsync for every wb job independently.
Change-Id: I8e8c527a49252dcc4b0b1ff591523de5a33ae5ba
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
If the layer pass through layer mix is unused, we need to disable alpha,
at this time, the layer mix only used to transfer alpha to next mix.
Change-Id: Ibd469b4fb61b41480297bc20c346e9ceefa61fc7
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
This is for mipi dsi on rk356x: there
is a hold signal from mipi dsi to
vop.
Mipi dsi may trigger the hold signal
when send dsi command or switch between
video mode and command mode.
vop may run into an unexpected situation if this hold
signal is rise when vop is running.
So when mipi dsi switch between video mode
or command mode, or send a dsi command, it
should set vop in stanby state.
Change-Id: I80e456d3416518436045ae8e0eec215c22b111a3
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
when import dma-buf we should compare dma_buf->ops with rockchip_drm_gem_prime_dmabuf_ops;
so we implement rockchip_drm_gem_prime_import to instead of drm_gem_prime_import.
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Change-Id: Iab3260b5c3efb5634d411eb1e8620fb575aa063c
Because the kernel debug fs will removed from android 11, so we move
sw_sync to misc devices, as android lib sync has done the compatibility
work, so after this commit, the hwc there is no need to update.
Signed-off-by: Huang Jiachai <hjc@rock-chips.com>
Change-Id: I799b66b1ba98c9370893b9554095664010b635df
dmesg log from bootup:
...
[ 0.988106] mali fde60000.gpu: GPU identified as 0x2 arch 7.4.0 r1p0 status 0
[ 0.988199] mali fde60000.gpu: No memory group manager is configured
[ 0.989228] mali fde60000.gpu: Probed as mali0
[root@RK356X:/]# cat ./sys/devices/platform/fde60000.gpu/gpuinfo
Mali-G52 1 cores r1p0 0x7402
[root@RK356X:/]# ls /sys/class/devfreq/fde60000.gpu/
available_frequencies governor name target_freq
available_governors load polling_interval timer
cur_freq max_freq power trans_stat
device min_freq subsystem uevent
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Change-Id: I1669385cd2609fbe8ba4507f777e904e1f6c6961
Enable bus_npu so that we can enable npu@1.0G safely when necessary.
Change-Id: I1a6ce1652aba7bafe91135bc79881cad0d5980ce
Signed-off-by: Liang Chen <cl@rock-chips.com>
Maybe some people want to use the Ethernet function of evb2,
which is turned on by default so that the Ethernet can work.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Change-Id: I314ac4e0d51804ea3463735d6cc9c90a536d173a
1. rockchip,disable-auto-freq, means when get/set/reduce freq,
return directly.
2. set assigned-clock-rates at hardware running rates, then
it not need to adjust before running.
Change-Id: I0d7864112bb5ade99e29bcce9824f84e9a58735e
Signed-off-by: Ding Wei <leo.ding@rock-chips.com>
This reverts commit fc2f74ccdd.
Use sram can reduce the memory bandwidth usage.
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
Change-Id: I5fae577671a905348239d0a40299d69e4cd8e6bb
Since the cma reserved start from 0x10000000, size 0x00800000,
so fix the eink reserved default start from 0x10800000
Signed-off-by: Zorro Liu <lyx@rock-chips.com>
Change-Id: Iff6933137e77ac678bb7dd815968a9d447476623
