[ Upstream commit 523dffccbadea0cfd65f1ff04944b864c558c4a8 ]
total_bytes in msg_loop_rx should also take push into account, otherwise
total_bytes will be a smaller value, which makes the msg_loop_rx end early.
Besides, total_bytes has already taken pop into account, so we don't need
to subtract some bytes from iov_buf in sendmsg_test. The additional
subtraction may make total_bytes a negative number, and msg_loop_rx will
just end without checking anything.
Fixes: 18d4e900a4 ("bpf: Selftests, improve test_sockmap total bytes counter")
Fixes: d69672147f ("selftests, bpf: Add one test for sockmap with strparser")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-4-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4095031463d4e99b534d2cd82035a417295764ae ]
In the SENDPAGE test, "opt->iov_length * cnt" size of data will be sent
cnt times by sendfile.
1. In push/pop tests, they will be invoked cnt times, for the simplicity of
msg_verify_data, change chunk_sz to iov_length
2. Change iov_length in test_send_large from 1024 to 8192. We have pop test
where txmsg_start_pop is 4096. 4096 > 1024, an error will be returned.
Fixes: 328aa08a08 ("bpf: Selftests, break down test_sockmap into subtests")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-3-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84bfbfbbd32aee136afea4b6bf82581dce79c305 ]
This commit fix a typographical error in netlink nlmsg_type constants definition in the include/uapi/linux/rtnetlink.h at line 177. The definition is RTM_NEWNVLAN RTM_NEWVLAN instead of RTM_NEWVLAN RTM_NEWVLAN.
Signed-off-by: Maurice Lambert <mauricelambert434@gmail.com>
Fixes: 8dcea18708 ("net: bridge: vlan: add rtm definitions and dump support")
Link: https://patch.msgid.link/20241103223950.230300-1-mauricelambert434@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cddc04275f95ca3b18da5c0fb111705ac173af89 ]
Update of stateful object triggers:
WARNING: suspicious RCU usage
net/netfilter/nf_tables_api.c:7759 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by nft/3060:
#0: ffff88810f0578c8 (&nft_net->commit_mutex){+.+.}-{4:4}, [..]
... but this list is not protected by the transaction mutex but the
nfnl nftables subsystem mutex.
Switch to nft_obj_type_get which will acquire rcu read lock,
bump refcount, and returns the result.
v3: Dan Carpenter points out nft_obj_type_get returns error pointer, not
NULL, on error.
Fixes: dad3bdeef4 ("netfilter: nf_tables: fix memory leak during stateful obj update").
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84b1a0c0140a9a92ea108576c0002210f224ce59 ]
Turn update into noop as a follow up for:
9fedd894b4 ("netfilter: nf_tables: fix unexpected EOPNOTSUPP error")
instead of adding a transaction object which is simply discarded at a
later stage of the commit protocol.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: cddc04275f95 ("netfilter: nf_tables: must hold rcu read lock while iterating object type list")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20c7b42d9dbd048019bfe0af39229e3014007a98 ]
There may be a potential integer overflow issue in
_dpu_core_perf_calc_clk(). crtc_clk is defined as u64, while
mode->vtotal, mode->hdisplay, and drm_mode_vrefresh(mode) are defined as
a smaller data type. The result of the calculation will be limited to
"int" in this case without correct casting. In screen with high
resolution and high refresh rate, integer overflow may happen.
So, we recommend adding an extra cast to prevent potential
integer overflow.
Fixes: c33b7c0389 ("drm/msm/dpu: add support for clk and bw scaling for display")
Signed-off-by: Zichen Xie <zichenxie0106@gmail.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/622206/
Link: https://lore.kernel.org/r/20241029194209.23684-1-zichenxie0106@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37dc4737447a7667f8e9ec790dac251da057eb27 ]
The perfmon sampling mutates shared GPU state (e.g. VIVS_HI_CLOCK_CONTROL
to select the pipe for the perf counter reads). To avoid clashing with
other functions mutating the same state (e.g. etnaviv_gpu_update_clock)
the perfmon sampling needs to hold the GPU lock.
Fixes: 68dc0b295d ("drm/etnaviv: use 'sync points' for performance monitor requests")
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61a6920bb6 ]
Older GC300 revisions have their power registers at an offset of 0x200
rather than 0x100. Add new gpu_read_power and gpu_write_power functions
to encapsulate accesses to the power addresses and fix the addresses.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Stable-dep-of: 37dc4737447a ("drm/etnaviv: hold GPU lock across perfmon sampling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13c96ac9a3f0f1c7ba1ff0656ea508e7fa065e7e ]
Remove __GFP_HIGHMEM when requesting a page from DMA32 zone,
and since all vivante GPUs in the system will share the same
DMA constraints, move the check of whether to get a page from
DMA32 to etnaviv_bind().
Fixes: b72af445cd ("drm/etnaviv: request pages from DMA32 zone when needed")
Suggested-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f32ddd87e499ba6d2dc74ce30b6932baf1e1fc3 ]
There is a need to check the returned value of the registration function.
In case of returned error, print that and stop the init process.
Fixes: 7c0ffcd40b ("drm/msm/gpu: Respect PM QoS constraints")
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Patchwork: https://patchwork.freedesktop.org/patch/620336/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fadcc3ab13 ]
Change idle freq clamping back to the direct method, bypassing PM QoS
requests. The problem with using PM QoS requests is they call
(indirectly) the governors ->get_target_freq() which goes thru a
get_dev_status() cycle. The problem comes when the GPU becomes active
again and we remove the idle-clamp request, we go through another
get_dev_status() cycle for the period that the GPU has been idle, which
triggers the governor to lower the target freq excessively.
This partially reverts commit 7c0ffcd40b ("drm/msm/gpu: Respect PM QoS
constraints"), but preserves the use of boost QoS request, so that it
will continue to play nicely with other QoS requests such as a cooling
device. This also mostly undoes commit 78f815c1cf ("drm/msm: return the
average load over the polling period")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/517785/
Link: https://lore.kernel.org/r/20230110231447.1939101-3-robdclark@gmail.com
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Stable-dep-of: 8f32ddd87e49 ("drm/msm/gpu: Check the status of registration to PM QoS")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87cb58aebdf7005661a07e9fd5a900f924d48c75 ]
The callsite layout for arm64 fentry is:
mov x9, lr
nop
When a bpf prog is attached, the nop instruction is patched to a call
to bpf trampoline:
mov x9, lr
bl <bpf trampoline>
So two return addresses are passed to bpf trampoline: the return address
for the traced function/prog, stored in x9, and the return address for
the bpf trampoline itself, stored in lr. To obtain a full and accurate
call stack, the bpf trampoline constructs two fake function frames using
x9 and lr.
However, struct_ops progs are invoked directly as function callbacks,
meaning that x9 is not set as it is in the fentry callsite. In this case,
the frame constructed using x9 is garbage. The following stack trace for
struct_ops, captured by perf sampling, illustrates this issue, where
tcp_ack+0x404 is a garbage frame:
ffffffc0801a04b4 bpf_prog_50992e55a0f655a9_bpf_cubic_cong_avoid+0x98 (bpf_prog_50992e55a0f655a9_bpf_cubic_cong_avoid)
ffffffc0801a228c [unknown] ([kernel.kallsyms]) // bpf trampoline
ffffffd08d362590 tcp_ack+0x798 ([kernel.kallsyms]) // caller for bpf trampoline
ffffffd08d3621fc tcp_ack+0x404 ([kernel.kallsyms]) // garbage frame
ffffffd08d36452c tcp_rcv_established+0x4ac ([kernel.kallsyms])
ffffffd08d375c58 tcp_v4_do_rcv+0x1f0 ([kernel.kallsyms])
ffffffd08d378630 tcp_v4_rcv+0xeb8 ([kernel.kallsyms])
To fix it, construct only one frame using lr for struct_ops.
The above stack trace also indicates that there is no kernel symbol for
struct_ops bpf trampoline. This will be addressed in a follow-up patch.
Fixes: efc9909fdc ("bpf, arm64: Add bpf trampoline for arm64")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Tested-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20241025085220.533949-1-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d241a139c2e9f8a479f25c75ebd5391e6a448500 ]
Replace one-element array with a flexible-array member in `struct
mwifiex_ie_types_wildcard_ssid_params` to fix the following warning
on a MT8173 Chromebook (mt8173-elm-hana):
[ 356.775250] ------------[ cut here ]------------
[ 356.784543] memcpy: detected field-spanning write (size 6) of single field "wildcard_ssid_tlv->ssid" at drivers/net/wireless/marvell/mwifiex/scan.c:904 (size 1)
[ 356.813403] WARNING: CPU: 3 PID: 742 at drivers/net/wireless/marvell/mwifiex/scan.c:904 mwifiex_scan_networks+0x4fc/0xf28 [mwifiex]
The "(size 6)" above is exactly the length of the SSID of the network
this device was connected to. The source of the warning looks like:
ssid_len = user_scan_in->ssid_list[i].ssid_len;
[...]
memcpy(wildcard_ssid_tlv->ssid,
user_scan_in->ssid_list[i].ssid, ssid_len);
There is a #define WILDCARD_SSID_TLV_MAX_SIZE that uses sizeof() on this
struct, but it already didn't account for the size of the one-element
array, so it doesn't need to be changed.
Fixes: 5e6e3a92b9 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241007222301.24154-1-alpernebiyasak@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee9b352ce4650ffc0d8ca0ac373d7c009c7e561e ]
Function msg_verify_data should have context of bytes_cnt and k instead of
assuming they are zero. Otherwise, test_sockmap with data integrity test
will report some errors. I also fix the logic related to size and index j
1/ 6 sockmap::txmsg test passthrough:FAIL
2/ 6 sockmap::txmsg test redirect:FAIL
7/12 sockmap::txmsg test apply:FAIL
10/11 sockmap::txmsg test push_data:FAIL
11/17 sockmap::txmsg test pull-data:FAIL
12/ 9 sockmap::txmsg test pop-data:FAIL
13/ 1 sockmap::txmsg test push/pop data:FAIL
...
Pass: 24 Fail: 52
After applying this patch, some of the errors are solved, but for push,
pull and pop, we may need more fixes to msg_verify_data, added a TODO
10/11 sockmap::txmsg test push_data:FAIL
11/17 sockmap::txmsg test pull-data:FAIL
12/ 9 sockmap::txmsg test pop-data:FAIL
...
Pass: 37 Fail: 15
Besides, added a custom errno EDATAINTEGRITY for msg_verify_data, we
shall not ignore the error in txmsg_cork case.
Fixes: 753fb2ee09 ("bpf: sockmap, add msg_peek tests to test_sockmap")
Fixes: 16edddfe3c ("selftests/bpf: test_sockmap, check test failure")
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Link: https://lore.kernel.org/r/20241012203731.1248619-2-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d343723c7e1f9f6d64f721f07cfdfc2993758d1 ]
When a display controller driver uses DRM_BRIDGE_ATTACH_NO_CONNECTOR,
tc358767 will behave properly and skip the creation of the connector.
However, tc_get_display_props(), which is used to find out about the DP
monitor and link, is only called from two places: .atomic_enable() and
tc_connector_get_modes(). The latter is only used when tc358767 creates
its own connector, i.e. when DRM_BRIDGE_ATTACH_NO_CONNECTOR is _not_
set.
Thus, the driver never finds out the link properties before get_edid()
is called. With num_lanes of 0 and link_rate of 0 there are not many
valid modes...
Fix this by adding tc_get_display_props() call at the beginning of
get_edid(), so that we have up to date information before looking at the
modes.
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Closes: https://lore.kernel.org/all/24282420-b4dd-45b3-bb1c-fc37fe4a8205@siemens.com/
Fixes: de5e6c027a ("drm/bridge: tc358767: add drm_panel_bridge support")
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231108-tc358767-v2-2-25c5f70a2159@ideasonboard.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2cf567f421dbfe7e53b7e5ddee9400da10efb75d ]
The current code only copies the address for the in path, leaving the out
path address set to 0. This patch corrects the issue by copying the addresses
for both the in and out paths. Before this patch:
# cat /sys/kernel/debug/netdevsim/netdevsim0/ports/0/ipsec
SA count=2 tx=20
sa[0] tx ipaddr=0.0.0.0
sa[0] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1
sa[0] key=0x3167608a ca4f1397 43565909 941fa627
sa[1] rx ipaddr=192.168.0.1
sa[1] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1
sa[1] key=0x3167608a ca4f1397 43565909 941fa627
After this patch:
= cat /sys/kernel/debug/netdevsim/netdevsim0/ports/0/ipsec
SA count=2 tx=20
sa[0] tx ipaddr=192.168.0.2
sa[0] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1
sa[0] key=0x3167608a ca4f1397 43565909 941fa627
sa[1] rx ipaddr=192.168.0.1
sa[1] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1
sa[1] key=0x3167608a ca4f1397 43565909 941fa627
Fixes: 7699353da8 ("netdevsim: add ipsec offload testing")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20241010040027.21440-3-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db089c9158c1d535a36dfc010e5db37fccea2561 ]
Libbpf pre-1.0 had a legacy logic of allowing singular non-annotated
(i.e., not having explicit SEC() annotation) function to be treated as
sole entry BPF program (unless there were other explicit entry
programs).
This behavior was dropped during libbpf 1.0 transition period (unless
LIBBPF_STRICT_SEC_NAME flag was unset in libbpf_mode). When 1.0 was
released and all the legacy behavior was removed, the bug slipped
through leaving this legacy behavior around.
Fix this for good, as it actually causes very confusing behavior if BPF
object file only has subprograms, but no entry programs.
Fixes: bd054102a8 ("libbpf: enforce strict libbpf 1.0 behaviors")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241010211731.4121837-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4073213488be542f563eb4b2457ab4cbcfc2b738 ]
sym_is_subprog() is incorrectly rejecting relocations against *weak*
global subprogs. Fix that by realizing that STB_WEAK is also a global
function.
While it seems like verifier doesn't support taking an address of
non-static subprog right now, it's still best to fix support for it on
libbpf side, otherwise users will get a very confusing error during BPF
skeleton generation or static linking due to misinterpreted relocation:
libbpf: prog 'handle_tp': bad map relo against 'foo' in section '.text'
Error: failed to open BPF object file: Relocation failed
It's clearly not a map relocation, but is treated and reported as such
without this fix.
Fixes: 53eddb5e04 ("libbpf: Support subprog address relocation")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241009011554.880168-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc9b3fb827fceec4e05564d6e668280f4470ab5b ]
Including the network_helpers.h header in tests can lead to the following
build error:
./network_helpers.h: In function ‘csum_tcpudp_magic’:
./network_helpers.h:116:14: error: implicit declaration of function \
‘htons’ [-Werror=implicit-function-declaration]
116 | s += htons(proto + len);
The error is avoided in many cases thanks to some other headers included
earlier and bringing in arpa/inet.h (ie: test_progs.h).
Make sure that test_progs build success does not depend on header ordering
by adding the missing header include in network_helpers.h
Fixes: f6642de0c3e9 ("selftests/bpf: Add csum helpers")
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241008-network_helpers_fix-v1-1-2c2ae03df7ef@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5bf1557e3d6a69113649d831276ea2f97585fc33 ]
test_progs uses glibc specific functions backtrace() and
backtrace_symbols_fd() to print backtrace in case of SIGSEGV.
Recent commit (see fixes) updated test_progs.c to define stub versions
of the same functions with attriubte "weak" in order to allow linking
test_progs against musl libc. Unfortunately this broke the backtrace
handling for glibc builds.
As it turns out, glibc defines backtrace() and backtrace_symbols_fd()
as weak:
$ llvm-readelf --symbols /lib64/libc.so.6 \
| grep -P '( backtrace_symbols_fd| backtrace)$'
4910: 0000000000126b40 161 FUNC WEAK DEFAULT 16 backtrace
6843: 0000000000126f90 852 FUNC WEAK DEFAULT 16 backtrace_symbols_fd
So does test_progs:
$ llvm-readelf --symbols test_progs \
| grep -P '( backtrace_symbols_fd| backtrace)$'
2891: 00000000006ad190 15 FUNC WEAK DEFAULT 13 backtrace
11215: 00000000006ad1a0 41 FUNC WEAK DEFAULT 13 backtrace_symbols_fd
In such situation dynamic linker is not obliged to favour glibc
implementation over the one defined in test_progs.
Compiling with the following simple modification to test_progs.c
demonstrates the issue:
$ git diff
...
\--- a/tools/testing/selftests/bpf/test_progs.c
\+++ b/tools/testing/selftests/bpf/test_progs.c
\@@ -1817,6 +1817,7 @@ int main(int argc, char **argv)
if (err)
return err;
+ *(int *)0xdeadbeef = 42;
err = cd_flavor_subdir(argv[0]);
if (err)
return err;
$ ./test_progs
[0]: Caught signal #11!
Stack trace:
<backtrace not supported>
Segmentation fault (core dumped)
Resolve this by hiding stub definitions behind __GLIBC__ macro check
instead of using "weak" attribute.
Fixes: c9a83e76b5a9 ("selftests/bpf: Fix compile if backtrace support missing in libc")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Tony Ambardar <tony.ambardar@gmail.com>
Reviewed-by: Tony Ambardar <tony.ambardar@gmail.com>
Acked-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/bpf/20241003210307.3847907-1-eddyz87@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4236f114a3ffbbfd217436c08852e94cae372f57 ]
During the xdp_adjust_tail test, probabilistic failure occurs and SKB package
is discarded by the kernel. After checking the issues by tracking SKB package,
it is identified that they were caused by checksum errors. Refer to checksum
of the arch/arm64/include/asm/checksum.h for fixing.
v2: Based on Alexei Starovoitov's suggestions, it is necessary to keep the code
implementation consistent.
Fixes: c6ffd1ff78 (bpf: add bpf_xdp_adjust_tail sample prog)
Signed-off-by: Yuan Chen <chenyuan@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240930024115.52841-1-chenyuan_fl@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00ae002116a14c2e6a342c4c9ae080cdbb9b4b21 ]
The bridge might miss the display change events when it's powered off.
This happens when a user changes the external monitor when the system
is suspended and the embedded controller doesn't not wake AP up.
It's also observed that one DP-to-HDMI bridge doesn't work correctly
when there is no EDID read after it is powered on.
Drop the cache to force an EDID read after system resume to fix this.
Fixes: 8bdfc5dae4 ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240926092931.3870342-2-treapking@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4649cbd97fdae5069e9a71cd7669b62b90e03669 ]
Some fix and updates in the following items:
1. examples:
Update generic node name to 'audio-codec' to comply with the
coming change in 'mt6359.dtsi'. This change is necessary to fix the
dtbs_check error:
pmic: 'mt6359codec' does not match any of the regexes: 'pinctrl-[0-9]+'
2. mediatek,dmic-mode:
After inspecting the .dts and .dtsi files using 'mt6359-codec', it was
discovered that the definitions of 'two wires' and 'one wire' are
inverted compared to the DT schema.
For example, the following boards using MT6359 PMIC:
- mt8192-asurada.dtsi
- mt8195-cherry.dtsi
These boards use the same definitions of 'dmic-mode' as other boards
using MT6358 PMIC. The meaning of '0' or '1' has been noted as comments
in the device trees.
Upon examining the code in [1] and [2], it was confirmed that the
definitions of 'dmic-mode' are consistent between "MT6359 PMIC" and
"MT6358 PMIC". Therefore, the DT Schema should be correct as is.
References:
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/sound/soc/codecs/mt6358.c#n1875
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/sound/soc/codecs/mt6359.c#L1515
Fixes: 539237d1c6 ("dt-bindings: mediatek: mt6359: add codec document")
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20240930075451.14196-1-macpaul.lin@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52db16ec5bae7bd027804265b968259d1a6c3970 ]
In supported_vht_mcs_rate_nss2, the rate for MCS9 & VHT20 is defined as
{1560, 1733}, this does not align with firmware's definition and therefore
fails the verification in ath10k_mac_get_rate_flags_vht():
invalid vht params rate 1730 100kbps nss 2 mcs 9
and:
invalid vht params rate 1920 100kbps nss 2 mcs 9
Change it to {1730, 1920} to align with firmware to fix the issue.
Since ath10k_hw_params::supports_peer_stats_info is enabled only for
QCA6174, this change does not affect other chips.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00309-QCARMSWPZ-1
Fixes: 3344b99d69 ("ath10k: add bitrate parse for peer stats info")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/lkml/fba24cd3-4a1e-4072-8585-8402272788ff@molgen.mpg.de/
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13 9360
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240711020344.98040-3-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf1becb7f996a0a23ea2c270cf6bb0911ec3ca1a ]
We must first flush the MMU cache and then, flush the TLB, not the other
way around. Currently, we can see a race condition between the MMU cache
and the TLB when running multiple rendering processes at the same time.
This is evidenced by MMU errors triggered by the IRQ.
Fix the MMU flush order by flushing the MMU cache and then the TLB.
Also, in order to address the race condition, wait for the MMU cache flush
to finish before starting the TLB flush.
Fixes: 57692c94dc ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923141348.2422499-2-mcanal@igalia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a88fee2d67d9b78c24630a987a88ccf886b2498b ]
smatch reports:
drivers/gpu/drm/omapdrm/dss/base.c:176 omapdss_device_disconnect() error: we previously assumed 'src' could be null (see line 169)
This code is mostly from a time when omapdrm had its own display device
model. I can't honestly remember the details, and I don't think it's
worth digging in deeply into that for a legacy driver.
However, it looks like we only call omapdss_device_disconnect() and
omapdss_device_connect() with NULL as the src parameter. We can thus
drop the src parameter from both functions, and fix the smatch warning.
I don't think omapdss_device_disconnect() ever gets NULL for the dst
parameter (if it did, we'd crash soon after returning from the
function), but I have kept the !dst check, just in case, but I added a
WARN_ON() there.
Also, if the dst parameter can be NULL, we can't always get the struct
dss_device pointer from dst->dss (which is only used for a debug print).
To make sure we can't hit that issue, do it similarly to the
omapdss_device_connect() function: add 'struct dss_device *dss' as the
first parameter, so that we always have it regardless of the dst.
Fixes: 79107f274b ("drm/omap: Add support for drm_bridge")
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240806-omapdrm-misc-fixes-v1-1-15d31aea0831@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8619593634cbdf5abf43f5714df49b04e4ef09ab ]
I found the following bug in my fuzzer:
UBSAN: array-index-out-of-bounds in drivers/net/wireless/ath/ath9k/htc_hst.c:26:51
index 255 is out of range for type 'htc_endpoint [22]'
CPU: 0 UID: 0 PID: 8 Comm: kworker/0:0 Not tainted 6.11.0-rc6-dirty #14
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: events request_firmware_work_func
Call Trace:
<TASK>
dump_stack_lvl+0x180/0x1b0
__ubsan_handle_out_of_bounds+0xd4/0x130
htc_issue_send.constprop.0+0x20c/0x230
? _raw_spin_unlock_irqrestore+0x3c/0x70
ath9k_wmi_cmd+0x41d/0x610
? mark_held_locks+0x9f/0xe0
...
Since this bug has been confirmed to be caused by insufficient verification
of conn_rsp_epid, I think it would be appropriate to add a range check for
conn_rsp_epid to htc_connect_service() to prevent the bug from occurring.
Fixes: fb9987d0f7 ("ath9k_htc: Support for AR9271 chipset.")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240909103855.68006-1-aha310510@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
