[ Upstream commit ed6cbe6e5563452f305e89c15846820f2874e431 ]
The patchset introducing kernel_sec_start/end variables to separate the
kernel/lowmem memory mappings, broke the mapping of the kernel memory
for xipkernels.
kernel_sec_start/end variables are in RO area before the MMU is switched
on for xipkernels.
So these cannot be set early in boot in head.S. Fix this by setting these
after MMU is switched on.
xipkernels need two different mappings for kernel text (starting at
CONFIG_XIP_PHYS_ADDR) and data (starting at CONFIG_PHYS_OFFSET).
Also, move the kernel code mapping from devicemaps_init() to map_kernel().
Fixes: a91da54570 ("ARM: 9089/1: Define kernel physical section start and end")
Signed-off-by: Harith George <harith.g@alifsemi.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8eb36164d1a6769a20ed43033510067ff3dab9ee ]
Commit 4598380f9c ("bonding: fix ns validation on backup slaves")
tried to resolve the issue where backup slaves couldn't be brought up when
receiving IPv6 Neighbor Solicitation (NS) messages. However, this fix only
worked for drivers that receive all multicast messages, such as the veth
interface.
For standard drivers, the NS multicast message is silently dropped because
the slave device is not a member of the NS target multicast group.
To address this, we need to make the slave device join the NS target
multicast group, ensuring it can receive these IPv6 NS messages to validate
the slave’s status properly.
There are three policies before joining the multicast group:
1. All settings must be under active-backup mode (alb and tlb do not support
arp_validate), with backup slaves and slaves supporting multicast.
2. We can add or remove multicast groups when arp_validate changes.
3. Other operations, such as enslaving, releasing, or setting NS targets,
need to be guarded by arp_validate.
Fixes: 4e24be018e ("bonding: add new parameter ns_targets")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc065076ee7768377d7c16af7d1b0767782d8c98 ]
The first PPS latch time needs to be calculated by the driver
(in rounded off seconds) and configured as the start time
offset for the cycle. After synchronizing two PTP clocks
running as master/slave, missing this would cause master
and slave to start immediately with some milliseconds
drift which causes the PPS signal to never synchronize with
the PTP master.
Fixes: 186734c158 ("net: ti: icssg-prueth: add packet timestamping and ptp support")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20241111095842.478833-1-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b366eae71937ae7412365340b431064625f9617 ]
If the clock dwmac->tx_clk was not enabled in intel_eth_plat_probe,
it should not be disabled in any path.
Conversely, if it was enabled in intel_eth_plat_probe, it must be disabled
in all error paths to ensure proper cleanup.
Found by Linux Verification Center (linuxtesting.org) with Klever.
Fixes: 9efc9b2b04 ("net: stmmac: Add dwmac-intel-plat for GBE driver")
Signed-off-by: Vitalii Mordan <mordan@ispras.ru>
Link: https://patch.msgid.link/20241108173334.2973603-1-mordan@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c9fc838067b02cb3e6057fef5cd7cf1c04a95aa ]
Now, all users of the old stmmac_pltfr_remove() are converted to the
devres helper, it's time to rename stmmac_pltfr_remove_no_dt() back to
stmmac_pltfr_remove() and remove the old stmmac_pltfr_remove().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 5b366eae7193 ("stmmac: dwmac-intel-plat: fix call balance of tx_clk handling routines")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d336a117b593e96559c309bb250f06b4fc22998f ]
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The calling of stmmac_pltfr_remove() now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 5b366eae7193 ("stmmac: dwmac-intel-plat: fix call balance of tx_clk handling routines")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abea8fd5e801a679312479b2bf00d7b4285eca78 ]
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The calling of stmmac_pltfr_remove() now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 5b366eae7193 ("stmmac: dwmac-intel-plat: fix call balance of tx_clk handling routines")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb94b7bb10109a14a5431a67e5d8e31cfa06b395 ]
copy_safe_from_sockptr()
return copy_from_sockptr()
return copy_from_sockptr_offset()
return copy_from_user()
copy_from_user() does not return an error on fault. Instead, it returns a
number of bytes that were not copied. Have it handled.
Patch has a side effect: it un-breaks garbage input handling of
nfc_llcp_setsockopt() and mISDN's data_sock_setsockopt().
Fixes: 6309863b31dd ("net: add copy_safe_from_sockptr() helper")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20241111-sockptr-copy-ret-fix-v1-1-a520083a93fb@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73af53d82076bbe184d9ece9e14b0dc8599e6055 ]
To generate hnode handles (in gen_new_htid()), u32 uses IDR and
encodes the returned small integer into a structured 32-bit
word. Unfortunately, at disposal time, the needed decoding
is not done. As a result, idr_remove() fails, and the IDR
fills up. Since its size is 2048, the following script ends up
with "Filter already exists":
tc filter add dev myve $FILTER1
tc filter add dev myve $FILTER2
for i in {1..2048}
do
echo $i
tc filter del dev myve $FILTER2
tc filter add dev myve $FILTER2
done
This patch adds the missing decoding logic for handles that
deserve it.
Fixes: e7614370d6 ("net_sched: use idr to allocate u32 filter handles")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Alexandre Ferrieux <alexandre.ferrieux@orange.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20241110172836.331319-1-alexandre.ferrieux@orange.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b78debe1c07e6aa3c91ca0b1384bf3cb8217c50 ]
Proper refcounts will always warn splat when something goes wrong,
be it underflow, saturation or object resurrection. As these are always
a source of bugs, use it in cls_u32 as a safeguard to prevent/catch issues.
Another benefit is that the refcount API self documents the code, making
clear when transitions to dead are expected.
For such an update we had to make minor adaptations on u32 to fit the refcount
API. First we set explicitly to '1' when objects are created, then the
objects are alive until a 1 -> 0 happens, which is then released appropriately.
The above made clear some redundant operations in the u32 code
around the root_ht handling that were removed. The root_ht is created
with a refcnt set to 1. Then when it's associated with tcf_proto it increments the refcnt to 2.
Throughout the entire code the root_ht is an exceptional case and can never be referenced,
therefore the refcnt never incremented/decremented.
Its lifetime is always bound to tcf_proto, meaning if you delete tcf_proto
the root_ht is deleted as well. The code made up for the fact that root_ht refcnt is 2 and did
a double decrement to free it, which is not a fit for the refcount API.
Even though refcount_t is implemented using atomics, we should observe
a negligible control plane impact.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20231114141856.974326-2-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 73af53d82076 ("net: sched: cls_u32: Fix u32's systematic failure to free IDR entries for hnodes.")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5359a7f583ab9b7706915213b54deac065bcb81 ]
Have exception event part of HCI traces which helps for debug.
snoop traces:
> HCI Event: Vendor (0xff) plen 79
Vendor Prefix (0x8780)
Intel Extended Telemetry (0x03)
Unknown extended telemetry event type (0xde)
01 01 de
Unknown extended subevent 0x07
01 01 de 07 01 de 06 1c ef be ad de ef be ad de
ef be ad de ef be ad de ef be ad de ef be ad de
ef be ad de 05 14 ef be ad de ef be ad de ef be
ad de ef be ad de ef be ad de 43 10 ef be ad de
ef be ad de ef be ad de ef be ad de
Fixes: af395330ab ("Bluetooth: btintel: Add Intel devcoredump support")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7b0ff5a866724c3ad21f2628c22a63336deec3f ]
As the final stages of socket destruction may be delayed, it is possible
that virtio_transport_recv_listen() will be called after the accept_queue
has been flushed, but before the SOCK_DONE flag has been set. As a result,
sockets enqueued after the flush would remain unremoved, leading to a
memory leak.
vsock_release
__vsock_release
lock
virtio_transport_release
virtio_transport_close
schedule_delayed_work(close_work)
sk_shutdown = SHUTDOWN_MASK
(!) flush accept_queue
release
virtio_transport_recv_pkt
vsock_find_bound_socket
lock
if flag(SOCK_DONE) return
virtio_transport_recv_listen
child = vsock_create_connected
(!) vsock_enqueue_accept(child)
release
close_work
lock
virtio_transport_do_close
set_flag(SOCK_DONE)
virtio_transport_remove_sock
vsock_remove_sock
vsock_remove_bound
release
Introduce a sk_shutdown check to disallow vsock_enqueue_accept() during
socket destruction.
unreferenced object 0xffff888109e3f800 (size 2040):
comm "kworker/5:2", pid 371, jiffies 4294940105
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
28 00 0b 40 00 00 00 00 00 00 00 00 00 00 00 00 (..@............
backtrace (crc 9e5f4e84):
[<ffffffff81418ff1>] kmem_cache_alloc_noprof+0x2c1/0x360
[<ffffffff81d27aa0>] sk_prot_alloc+0x30/0x120
[<ffffffff81d2b54c>] sk_alloc+0x2c/0x4b0
[<ffffffff81fe049a>] __vsock_create.constprop.0+0x2a/0x310
[<ffffffff81fe6d6c>] virtio_transport_recv_pkt+0x4dc/0x9a0
[<ffffffff81fe745d>] vsock_loopback_work+0xfd/0x140
[<ffffffff810fc6ac>] process_one_work+0x20c/0x570
[<ffffffff810fce3f>] worker_thread+0x1bf/0x3a0
[<ffffffff811070dd>] kthread+0xdd/0x110
[<ffffffff81044fdd>] ret_from_fork+0x2d/0x50
[<ffffffff8100785a>] ret_from_fork_asm+0x1a/0x30
Fixes: 3fe356d58e ("vsock/virtio: discard packets only when socket is really closed")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c079389878debf767dc4e52fe877b9117258dfe2 ]
Non-uplink representor port does not support XDP. The patch clears
the xdp feature by checking the net_device_ops.ndo_bpf is set or not.
Verify using the netlink tool:
$ tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml --dump dev-get
Representor netdev before the patch:
{'ifindex': 8,
'xdp-features': {'basic',
'ndo-xmit',
'ndo-xmit-sg',
'redirect',
'rx-sg',
'xsk-zerocopy'},
'xdp-rx-metadata-features': set(),
'xdp-zc-max-segs': 1,
'xsk-features': set()},
With the patch:
{'ifindex': 8,
'xdp-features': set(),
'xdp-rx-metadata-features': set(),
'xsk-features': set()},
Fixes: 4d5ab0ad96 ("net/mlx5e: take into account device reconfiguration for xdp_features flag")
Signed-off-by: William Tu <witu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241107183527.676877-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd6e972cc5890d91d6749bb48e3912721c4e4b25 ]
The kTLS tx handling code is using a mix of get_page() and
page_ref_inc() APIs to increment the page reference. But on the release
path (mlx5e_ktls_tx_handle_resync_dump_comp()), only put_page() is used.
This is an issue when using pages from large folios: the get_page()
references are stored on the folio page while the page_ref_inc()
references are stored directly in the given page. On release the folio
page will be dereferenced too many times.
This was found while doing kTLS testing with sendfile() + ZC when the
served file was read from NFS on a kernel with NFS large folios support
(commit 49b29a573da8 ("nfs: add support for large folios")).
Fixes: 84d1bb2b13 ("net/mlx5e: kTLS, Limit DUMP wqe size")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241107183527.676877-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce7356ae35943cc6494cc692e62d51a734062b7d ]
Additional active subflows - i.e. created by the in kernel path
manager - are included into the subflow list before starting the
3whs.
A racing recvmsg() spooling data received on an already established
subflow would unconditionally call tcp_cleanup_rbuf() on all the
current subflows, potentially hitting a divide by zero error on
the newly created ones.
Explicitly check that the subflow is in a suitable state before
invoking tcp_cleanup_rbuf().
Fixes: c76c695656 ("mptcp: call tcp_cleanup_rbuf on subflows")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/02374660836e1b52afc91966b7535c8c5f7bafb0.1731060874.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab1c793f457f740ab7108cc0b1340a402dbf484d ]
The 'state' can't be NULL, we should check crtc_state.
Fix warning:
drivers/gpu/drm/rockchip/rockchip_drm_vop.c:1096
vop_plane_atomic_async_check() warn: variable dereferenced before check
'state' (see line 1077)
Fixes: 5ddb0bd4dd ("drm/atomic: Pass the full state to planes async atomic check and update")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241021072818.61621-1-andyshrk@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e68da664d379f352d41d7955712c44e0a738e4ab ]
The tx_bytes should consider the actual size of the Ethernet frames
without the SPI encapsulation. But we still need to take care of
Ethernet padding.
Fixes: 2f207cbf0d ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20241108114343.6174-3-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1904fb9ebf911441f90a68e96b22aa73e4410505 ]
Netlink supports iterative dumping of data. It provides the families
the following ops:
- start - (optional) kicks off the dumping process
- dump - actual dump helper, keeps getting called until it returns 0
- done - (optional) pairs with .start, can be used for cleanup
The whole process is asynchronous and the repeated calls to .dump
don't actually happen in a tight loop, but rather are triggered
in response to recvmsg() on the socket.
This gives the user full control over the dump, but also means that
the user can close the socket without getting to the end of the dump.
To make sure .start is always paired with .done we check if there
is an ongoing dump before freeing the socket, and if so call .done.
The complication is that sockets can get freed from BH and .done
is allowed to sleep. So we use a workqueue to defer the call, when
needed.
Unfortunately this does not work correctly. What we defer is not
the cleanup but rather releasing a reference on the socket.
We have no guarantee that we own the last reference, if someone
else holds the socket they may release it in BH and we're back
to square one.
The whole dance, however, appears to be unnecessary. Only the user
can interact with dumps, so we can clean up when socket is closed.
And close always happens in process context. Some async code may
still access the socket after close, queue notification skbs to it etc.
but no dumps can start, end or otherwise make progress.
Delete the workqueue and flush the dump state directly from the release
handler. Note that further cleanup is possible in -next, for instance
we now always call .done before releasing the main module reference,
so dump doesn't have to take a reference of its own.
Reported-by: syzkaller <syzkaller@googlegroups.com>
Fixes: ed5d7788a9 ("netlink: Do not schedule work from sk_destruct")
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241106015235.2458807-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a360f311f57a36e96d88fa8086b749159714dcd2 upstream.
This was attempted by using the dev_name in the slab cache name, but as
Omar Sandoval pointed out, that can be an arbitrary string, eg something
like "/dev/root". Which in turn trips verify_dirent_name(), which fails
if a filename contains a slash.
So just make it use a sequence counter, and make it an atomic_t to avoid
any possible races or locking issues.
Reported-and-tested-by: Omar Sandoval <osandov@fb.com>
Link: https://lore.kernel.org/all/ZxafcO8KWMlXaeWE@telecaster.dhcp.thefacebook.com/
Fixes: 79efebae4afc ("9p: Avoid creating multiple slab caches with the same name")
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f8f931bba0f92052cf842b7e30917b1afcc77d5a upstream.
Recent changes are putting more pressure on THP deferred split queues:
under load revealing long-standing races, causing list_del corruptions,
"Bad page state"s and worse (I keep BUGs in both of those, so usually
don't get to see how badly they end up without). The relevant recent
changes being 6.8's mTHP, 6.10's mTHP swapout, and 6.12's mTHP swapin,
improved swap allocation, and underused THP splitting.
Before fixing locking: rename misleading folio_undo_large_rmappable(),
which does not undo large_rmappable, to folio_unqueue_deferred_split(),
which is what it does. But that and its out-of-line __callee are mm
internals of very limited usability: add comment and WARN_ON_ONCEs to
check usage; and return a bool to say if a deferred split was unqueued,
which can then be used in WARN_ON_ONCEs around safety checks (sparing
callers the arcane conditionals in __folio_unqueue_deferred_split()).
Just omit the folio_unqueue_deferred_split() from free_unref_folios(), all
of whose callers now call it beforehand (and if any forget then bad_page()
will tell) - except for its caller put_pages_list(), which itself no
longer has any callers (and will be deleted separately).
Swapout: mem_cgroup_swapout() has been resetting folio->memcg_data 0
without checking and unqueueing a THP folio from deferred split list;
which is unfortunate, since the split_queue_lock depends on the memcg
(when memcg is enabled); so swapout has been unqueueing such THPs later,
when freeing the folio, using the pgdat's lock instead: potentially
corrupting the memcg's list. __remove_mapping() has frozen refcount to 0
here, so no problem with calling folio_unqueue_deferred_split() before
resetting memcg_data.
That goes back to 5.4 commit 87eaceb3fa ("mm: thp: make deferred split
shrinker memcg aware"): which included a check on swapcache before adding
to deferred queue, but no check on deferred queue before adding THP to
swapcache. That worked fine with the usual sequence of events in reclaim
(though there were a couple of rare ways in which a THP on deferred queue
could have been swapped out), but 6.12 commit dafff3f4c850 ("mm: split
underused THPs") avoids splitting underused THPs in reclaim, which makes
swapcache THPs on deferred queue commonplace.
Keep the check on swapcache before adding to deferred queue? Yes: it is
no longer essential, but preserves the existing behaviour, and is likely
to be a worthwhile optimization (vmstat showed much more traffic on the
queue under swapping load if the check was removed); update its comment.
Memcg-v1 move (deprecated): mem_cgroup_move_account() has been changing
folio->memcg_data without checking and unqueueing a THP folio from the
deferred list, sometimes corrupting "from" memcg's list, like swapout.
Refcount is non-zero here, so folio_unqueue_deferred_split() can only be
used in a WARN_ON_ONCE to validate the fix, which must be done earlier:
mem_cgroup_move_charge_pte_range() first try to split the THP (splitting
of course unqueues), or skip it if that fails. Not ideal, but moving
charge has been requested, and khugepaged should repair the THP later:
nobody wants new custom unqueueing code just for this deprecated case.
The 87eaceb3fa commit did have the code to move from one deferred list
to another (but was not conscious of its unsafety while refcount non-0);
but that was removed by 5.6 commit fac0516b55 ("mm: thp: don't need care
deferred split queue in memcg charge move path"), which argued that the
existence of a PMD mapping guarantees that the THP cannot be on a deferred
list. As above, false in rare cases, and now commonly false.
Backport to 6.11 should be straightforward. Earlier backports must take
care that other _deferred_list fixes and dependencies are included. There
is not a strong case for backports, but they can fix cornercases.
Link: https://lkml.kernel.org/r/8dc111ae-f6db-2da7-b25c-7a20b1effe3b@google.com
Fixes: 87eaceb3fa ("mm: thp: make deferred split shrinker memcg aware")
Fixes: dafff3f4c850 ("mm: split underused THPs")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Upstream commit itself does not apply cleanly, because there
are fewer calls to folio_undo_large_rmappable() in this tree
(in particular, folio migration does not migrate memcg charge),
and mm/memcontrol-v1.c has not been split out of mm/memcontrol.c. ]
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b7b098cf00a2b65d5654a86dc8edf82f125289c1 upstream.
Patch series "Various significant MM patches".
These patches all interact in annoying ways which make it tricky to send
them out in any way other than a big batch, even though there's not really
an overarching theme to connect them.
The big effects of this patch series are:
- folio_test_hugetlb() becomes reliable, even when called without a
page reference
- We free up PG_slab, and we could always use more page flags
- We no longer need to check PageSlab before calling page_mapcount()
This patch (of 9):
For compound pages which are at least order-2 (and hence have a
deferred_list), initialise it and then we can check at free that the page
is not part of a deferred list. We recently found this useful to rule out
a source of corruption.
[peterx@redhat.com: always initialise folio->_deferred_list]
Link: https://lkml.kernel.org/r/20240417211836.2742593-2-peterx@redhat.com
Link: https://lkml.kernel.org/r/20240321142448.1645400-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20240321142448.1645400-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Include three small changes from the upstream commit, for backport safety:
replace list_del() by list_del_init() in split_huge_page_to_list(),
like c010d47f107f ("mm: thp: split huge page to any lower order pages");
replace list_del() by list_del_init() in folio_undo_large_rmappable(), like
9bcef5973e31 ("mm: memcg: fix split queue list crash when large folio migration");
keep __free_pages() instead of folio_put() in __update_and_free_hugetlb_folio(). ]
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ec056cef76a525706601b32048f174f9bea72c7c upstream.
The THP machinery does not support order-1 folios because it requires meta
data spanning the first 3 `struct page`s. So order-2 is the smallest
large folio that we can safely create.
There was a theoretical bug whereby if ra->size was 2 or 3 pages (due to
the device-specific bdi->ra_pages being set that way), we could end up
with order = 1. Fix this by unconditionally checking if the preferred
order is 1 and if so, set it to 0. Previously this was done in a few
specific places, but with this refactoring it is done just once,
unconditionally, at the end of the calculation.
This is a theoretical bug found during review of the code; I have no
evidence to suggest this manifests in the real world (I expect all
device-specific ra_pages values are much bigger than 3).
Link: https://lkml.kernel.org/r/20231201161045.3962614-1-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 704573851b51808b45dae2d62059d1d8189138a2 upstream.
This patch addresses an issue introduced by commit 1a83a716ec233 ("mm:
krealloc: consider spare memory for __GFP_ZERO") which causes MTE
(Memory Tagging Extension) to falsely report a slab-out-of-bounds error.
The problem occurs when zeroing out spare memory in __do_krealloc. The
original code only considered software-based KASAN and did not account
for MTE. It does not reset the KASAN tag before calling memset, leading
to a mismatch between the pointer tag and the memory tag, resulting
in a false positive.
Example of the error:
==================================================================
swapper/0: BUG: KASAN: slab-out-of-bounds in __memset+0x84/0x188
swapper/0: Write at addr f4ffff8005f0fdf0 by task swapper/0/1
swapper/0: Pointer tag: [f4], memory tag: [fe]
swapper/0:
swapper/0: CPU: 4 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.
swapper/0: Hardware name: MT6991(ENG) (DT)
swapper/0: Call trace:
swapper/0: dump_backtrace+0xfc/0x17c
swapper/0: show_stack+0x18/0x28
swapper/0: dump_stack_lvl+0x40/0xa0
swapper/0: print_report+0x1b8/0x71c
swapper/0: kasan_report+0xec/0x14c
swapper/0: __do_kernel_fault+0x60/0x29c
swapper/0: do_bad_area+0x30/0xdc
swapper/0: do_tag_check_fault+0x20/0x34
swapper/0: do_mem_abort+0x58/0x104
swapper/0: el1_abort+0x3c/0x5c
swapper/0: el1h_64_sync_handler+0x80/0xcc
swapper/0: el1h_64_sync+0x68/0x6c
swapper/0: __memset+0x84/0x188
swapper/0: btf_populate_kfunc_set+0x280/0x3d8
swapper/0: __register_btf_kfunc_id_set+0x43c/0x468
swapper/0: register_btf_kfunc_id_set+0x48/0x60
swapper/0: register_nf_nat_bpf+0x1c/0x40
swapper/0: nf_nat_init+0xc0/0x128
swapper/0: do_one_initcall+0x184/0x464
swapper/0: do_initcall_level+0xdc/0x1b0
swapper/0: do_initcalls+0x70/0xc0
swapper/0: do_basic_setup+0x1c/0x28
swapper/0: kernel_init_freeable+0x144/0x1b8
swapper/0: kernel_init+0x20/0x1a8
swapper/0: ret_from_fork+0x10/0x20
==================================================================
Fixes: 1a83a716ec233 ("mm: krealloc: consider spare memory for __GFP_ZERO")
Signed-off-by: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 73254a297c2dd094abec7c9efee32455ae875bdf upstream.
The io_register_iowq_max_workers() function calls io_put_sq_data(),
which acquires the sqd->lock without releasing the uring_lock.
Similar to the commit 009ad9f0c6 ("io_uring: drop ctx->uring_lock
before acquiring sqd->lock"), this can lead to a potential deadlock
situation.
To resolve this issue, the uring_lock is released before calling
io_put_sq_data(), and then it is re-acquired after the function call.
This change ensures that the locks are acquired in the correct
order, preventing the possibility of a deadlock.
Suggested-by: Maximilian Heyne <mheyne@amazon.de>
Signed-off-by: Hagar Hemdan <hagarhem@amazon.com>
Link: https://lore.kernel.org/r/20240604130527.3597-1-hagarhem@amazon.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8421d4c8762bd022cb491f2f0f7019ef51b4f0a7 ]
If a newly-added link type doesn't invoke BPF_LINK_TYPE(), accessing
bpf_link_type_strs[link->type] may result in an out-of-bounds access.
To spot such missed invocations early in the future, checking the
validity of link->type in bpf_link_show_fdinfo() and emitting a warning
when such invocations are missed.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241024013558.1135167-3-houtao@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9a8ecf81066e01e8a3de35517481bc5aa0439e5 ]
On some platforms, for example i.MX93, there is only one
audio PLL source, so some sample rate can't be supported.
If the PLL source is used for 8kHz series rates, then 11kHz
series rates can't be supported.
So add constraints according to the frequency of available
clock sources, then alsa-lib will help to convert the
unsupported rate for the driver.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/1728884313-6778-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b69269c870ece1bc7d2e3e39ca76f4602f2cb0dd ]
The information contained in the comment for LOONGARCH_CSR_ERA is even
less informative than the macro itself, which can cause confusion for
junior developers. Let's use the full English term.
Signed-off-by: Yanteng Si <siyanteng@cqsoftware.com.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ec4350d4efb5ccb6bd0e11d9cf7f2be4f47297d ]
For the external interrupt updating procedure in imsic, there was a
spinlock to protect it already. But since it should not be preempted in
any cases, we should turn to use raw_spinlock to prevent any preemption
in case PREEMPT_RT was enabled.
Signed-off-by: Cyan Yang <cyan.yang@sifive.com>
Reviewed-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Message-ID: <20240919160126.44487-1-cyan.yang@sifive.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51268879eb2bfc563a91cdce69362d9dbf707e7e ]
The Thinkpad X1 Tablet Gen 3 keyboard has the same Lenovo specific quirks
as the original Thinkpad X1 Tablet keyboard.
Add the PID for the "Thinkpad X1 Tablet Gen 3 keyboard" to the hid-lenovo
driver to fix the FnLock, Mute and media buttons not working.
Suggested-by: Izhar Firdaus <izhar@fedoraproject.org>
Closes https://bugzilla.redhat.com/show_bug.cgi?id=2315395
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 526748b925185e95f1415900ee13c2469d4b64cc ]
The Logitech Casa Touchpad does not reliably send touch release signals
when communicating through the Logitech Bolt wireless-to-USB receiver.
Adjusting the device class to add MT_QUIRK_NOT_SEEN_MEANS_UP to make
sure that no touches become stuck, MT_QUIRK_FORCE_MULTI_INPUT is not
needed, but harmless.
Linux does not have information on which devices are connected to the
Bolt receiver, so we have to enable this for the entire device.
Signed-off-by: Kenneth Albanowski <kenalba@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb86c42a2a5d44e849ddfbc98b8d2f4f40d36ee3 ]
In the bpf_out_neigh_v6 function, rcu_read_lock() is used to begin an RCU
read-side critical section. However, when unlocking, one branch
incorrectly uses a different RCU unlock flavour rcu_read_unlock_bh()
instead of rcu_read_unlock(). This mismatch in RCU locking flavours can
lead to unexpected behavior and potential concurrency issues.
This possible bug was identified using a static analysis tool developed
by myself, specifically designed to detect RCU-related issues.
This patch corrects the mismatched unlock flavour by replacing the
incorrect rcu_read_unlock_bh() with the appropriate rcu_read_unlock(),
ensuring that the RCU critical section is properly exited. This change
prevents potential synchronization issues and aligns with proper RCU
usage patterns.
Fixes: 09eed1192c ("neighbour: switch to standard rcu, instead of rcu_bh")
Signed-off-by: Jiawei Ye <jiawei.ye@foxmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/tencent_CFD3D1C3D68B45EA9F52D8EC76D2C4134306@qq.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44d0469f79bd3d0b3433732877358df7dc6b17b1 ]
As the introduction of the support for vsock and unix sockets in sockmap,
tls_sw_has_ctx_tx/rx cannot presume the socket passed in must be IS_ICSK.
vsock and af_unix sockets have vsock_sock and unix_sock instead of
inet_connection_sock. For these sockets, tls_get_ctx may return an invalid
pointer and cause page fault in function tls_sw_ctx_rx.
BUG: unable to handle page fault for address: 0000000000040030
Workqueue: vsock-loopback vsock_loopback_work
RIP: 0010:sk_psock_strp_data_ready+0x23/0x60
Call Trace:
? __die+0x81/0xc3
? no_context+0x194/0x350
? do_page_fault+0x30/0x110
? async_page_fault+0x3e/0x50
? sk_psock_strp_data_ready+0x23/0x60
virtio_transport_recv_pkt+0x750/0x800
? update_load_avg+0x7e/0x620
vsock_loopback_work+0xd0/0x100
process_one_work+0x1a7/0x360
worker_thread+0x30/0x390
? create_worker+0x1a0/0x1a0
kthread+0x112/0x130
? __kthread_cancel_work+0x40/0x40
ret_from_fork+0x1f/0x40
v2:
- Add IS_ICSK check
v3:
- Update the commits in Fixes
Fixes: 634f1a7110 ("vsock: support sockmap")
Fixes: 94531cfcbe ("af_unix: Add unix_stream_proto for sockmap")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20241106003742.399240-1-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f8825b2a78ac392d3fbb3a2e65e56d9e39d75e9 ]
ifcvf_init_hw() uses pci_read_config_byte() that returns
PCIBIOS_* codes. The error handling, however, assumes the codes are
normal errnos because it checks for < 0.
Convert the error check to plain non-zero check.
Fixes: 5a2414bc45 ("virtio: Intel IFC VF driver for VDPA")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Message-Id: <20241017013812.129952-1-yuancan@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Zhu Lingshan <lingshan.zhu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
