SPI NOR core changes:
- move vendor specific code out of the core into vendor drivers.
- unify all function and object names in the vendor modules.
- make setup() callback optional to improve readability.
- skip erase logic when the SPI_NOR_NO_ERASE flag is set at flash
declaration.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Avoid random build errors with architectures which do not select
HAS_IOMEM by depending on it in Kconfig.
This fixes the following warning:
/home/mraynal/0day/gcc-11.2.0-nolibc/s390-linux/bin/s390-linux-ld:
drivers/mtd/nand/ecc-mxic.o: in function `mxic_ecc_probe':
ecc-mxic.c:(.text+0x2244): undefined reference to `devm_platform_ioremap_resource'
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220314152336.75447-1-miquel.raynal@bootlin.com
While calculating speed during mtd_speedtest, the time interval
(i.e., start - finish) is rounded off to the nearest milliseconds by
ignoring the fractional part. This leads to miscalculation of speed.
The miscalculation is more visible while running speed test on small
partition sizes(i.e., when partition size is equal to eraseblock size or
twice the eraseblock size) at higher spi frequencies.
For e.g., while calculating eraseblock read speed for a mtd partition with
size equal to the eraseblock size(i.e., 64KiB) the eraseblock read time
interval comes out to be 966490 nanosecond. This is then converted to
millisecond(i.e., 0.966 msec.). The integer part (i.e., 0 msec) of the
value is considered and the fractional part (i.e., 0.966) is ignored,for
calculating the eraseblock read speed. So the reported eraseblock read
speed is 0 KiB/s, which is incorrect.
There are two approaches to fix this issue.
First approach will be to keep the time interval in millisecond. and round
up the integer value, with this approach the 0.966msec time interval in the
above example will be rounded up to 1msec and this value is used for
calculating the speed. Downside of this approach is that the reported speed
is still not accurate.
Second approach will be to convert the time interval to microseconds
instead of milliseconds, with this approach the 966490 nanosecond time
interval in the above example will be converted t0 966.490usec and this
value is used for calculating the speed. As compared to the current
implementation and the suggested First approach, this approach will report
a more accurate speed. Downside of this approach is that, in future if the
mtd size is too large then the u64 variable, that holds the number of
bytes, might overflow.
In this patch we have gone with the second approach as this reports a more
accurate speed. With this approach the eraseblock read speed in the above
example comes out to be 132505 KiB/s when the spi clock is configured at
150Mhz.
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220208103905.13354-1-amit.kumar-mahapatra@xilinx.com
Even if SPI_NOR_NO_ERASE was set, one could still send erase opcodes
to the flash. It is not recommended to send unsupported opcodes to
flashes. Fix the logic and do not set mtd->_erase when SPI_NOR_NO_ERASE
is specified. With this users will not be able to issue erase opcodes to
flashes and instead they will recive an -ENOTSUPP error.
Fixes: b199489d37 ("mtd: spi-nor: add the framework for SPI NOR")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220228163334.277730-1-tudor.ambarus@microchip.com
Don't return early when the flash is smaller than or equal to 16MiB. We
need to be able to register hooks for all sizes of flashes. This also has
the benefit that it increases the readability of the code because the
action, i.e. registering the fixups, is connected to the condition, i.e.
flashes larger than 16MiB.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Tested-by: Pratyush Yadav <p.yadav@ti.com> # on mt35xu512aba, s28hs512t
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220223134358.1914798-28-michael@walle.cc
The flag status register is only available on micron flashes. Move all
the functions around that into the micron module.
This is almost a mechanical move except for the spi_nor_fsr_ready()
which now also checks the normal status register. Previously, this was
done in spi_nor_ready().
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Tested-by: Pratyush Yadav <p.yadav@ti.com> # on mt35xu512aba, s28hs512t
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220223134358.1914798-25-michael@walle.cc
Pull locking fix from Borislav Petkov:
"Fix a NULL ptr dereference when dumping lockdep chains through
/proc/lockdep_chains"
* tag 'locking_urgent_for_v5.17_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep: Correct lock_classes index mapping
Pull x86 fixes from Borislav Petkov:
- Fix the ptrace regset xfpregs_set() callback to behave according to
the ABI
- Handle poisoned pages properly in the SGX reclaimer code
* tag 'x86_urgent_for_v5.17_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ptrace: Fix xfpregs_set()'s incorrect xmm clearing
x86/sgx: Fix missing poison handling in reclaimer
Pull scheduler fix from Borislav Petkov:
"Fix task exposure order when forking tasks"
* tag 'sched_urgent_for_v5.17_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix yet more sched_fork() races
Pull EDAC fix from Borislav Petkov:
"Fix a long-standing struct alignment bug in the EDAC struct allocation
code"
* tag 'edac_urgent_for_v5.17_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC: Fix calculation of returned address and next offset in edac_align_ptr()
Pull SCSI fixes from James Bottomley:
"Three fixes, all in drivers.
The ufs and qedi fixes are minor; the lpfc one is a bit bigger because
it involves adding a heuristic to detect and deal with common but not
standards compliant behaviour"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Fix divide by zero in ufshcd_map_queues()
scsi: lpfc: Fix pt2pt NVMe PRLI reject LOGO loop
scsi: qedi: Fix ABBA deadlock in qedi_process_tmf_resp() and qedi_process_cmd_cleanup_resp()
Pull dmaengine fixes from Vinod Koul:
"A bunch of driver fixes for:
- ptdma error handling in init
- lock fix in at_hdmac
- error path and error num fix for sh dma
- pm balance fix for stm32"
* tag 'dmaengine-fix-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: shdma: Fix runtime PM imbalance on error
dmaengine: sh: rcar-dmac: Check for error num after dma_set_max_seg_size
dmaengine: stm32-dmamux: Fix PM disable depth imbalance in stm32_dmamux_probe
dmaengine: sh: rcar-dmac: Check for error num after setting mask
dmaengine: at_xdmac: Fix missing unlock in at_xdmac_tasklet()
dmaengine: ptdma: Fix the error handling path in pt_core_init()
Pull i2c fixes from Wolfram Sang:
"Some driver updates, a MAINTAINERS fix, and additions to COMPILE_TEST
(so we won't miss build problems again)"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: remove duplicate entry for i2c-qcom-geni
i2c: brcmstb: fix support for DSL and CM variants
i2c: qup: allow COMPILE_TEST
i2c: imx: allow COMPILE_TEST
i2c: cadence: allow COMPILE_TEST
i2c: qcom-cci: don't put a device tree node before i2c_add_adapter()
i2c: qcom-cci: don't delete an unregistered adapter
i2c: bcm2835: Avoid clock stretching timeouts
Pull input fixes from Dmitry Torokhov:
- a fix for Synaptics touchpads in RMI4 mode failing to suspend/resume
properly because I2C client devices are now being suspended and
resumed asynchronously which changed the ordering
- a change to make sure we do not set right and middle buttons
capabilities on touchpads that are "buttonpads" (i.e. do not have
separate physical buttons)
- a change to zinitix touchscreen driver adding more compatible
strings/IDs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: psmouse - set up dependency between PS/2 and SMBus companions
Input: zinitix - add new compatible strings
Input: clear BTN_RIGHT/MIDDLE on buttonpads
Pull power supply fixes from Sebastian Reichel:
"Three regression fixes for the 5.17 cycle:
- build warning fix for power-supply documentation
- pointer size fix in cw2015 battery driver
- OOM handling in bq256xx charger driver"
* tag 'for-v5.17-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: bq256xx: Handle OOM correctly
power: supply: core: fix application of sizeof to pointer
power: supply: fix table problem in sysfs-class-power
