Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200713104453.33414-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200713164024.35988-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
One-element arrays are being deprecated[1]. Replace the one-element
arrays with a simple value type u8 reserved, once this is just a
placeholder for alignment.
Also, while there, use the preferred form for passing a size of a struct.
The alternative form where struct name is spelled out hurts readability
and introduces an opportunity for a bug when the variable type is changed
but the corresponding sizeof that is passed as argument is not.
[1] https://github.com/KSPP/linux/issues/79
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200714214516.GA1040@embeddedor
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200717185925.84102-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use “flexible array members”[1] for these
cases. The older style of one-element or zero-length arrays should
no longer be used[2].
Also, make use of the array_size() helper instead of the open-coded
version in memcpy(). These sorts of multiplication factors need to
be wrapped in array_size().
And while there, use the preferred form for passing a size of a struct.
The alternative form where struct name is spelled out hurts readability
and introduces an opportunity for a bug when the pointer variable type is
changed but the corresponding sizeof that is passed as argument is not.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/79
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200722181534.GA31357@embeddedor
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Moritz writes:
FPGA Manager changes for 5.9-rc1
Here is the (slightly larger than usual) patch set for the 5.9-rc1 merge
window.
DFL:
- Xu's changes add support for AFU interrupt handling and puts them to
use for error handling.
- Xu's other change also adds another device-id for the Intel FPGA PAC N3000.
- John's change converts from using get_user_pages() to
pin_user_pages().
- Gustavo's patch cleans up some of the allocation by using
struct_size().
Xilinx:
- Luca's changes clean up the xilinx-spi and xilinx-slave-serial drivers
and updates the comments and dt-bindings to reflect the fact it also
supports 7 series devices.
Core:
- Tom cleaned up the fpga-bridge / fpga-mgr core by removing some
dead-stores.
All patches have been reviewed on the mailing list, and have been in the
last few linux-next releases (as part of my for-next branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
* tag 'fpga-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
fpga: dfl: pci: add device id for Intel FPGA PAC N3000
Documentation: fpga: dfl: add descriptions for interrupt related interfaces.
fpga: dfl: afu: add AFU interrupt support
fpga: dfl: fme: add interrupt support for global error reporting
fpga: dfl: afu: add interrupt support for port error reporting
fpga: dfl: introduce interrupt trigger setting API
fpga: dfl: pci: add irq info for feature devices enumeration
fpga: dfl: parse interrupt info for feature devices on enumeration
fpga manager: xilinx-spi: check INIT_B pin during write_init
dt-bindings: fpga: xilinx-slave-serial: add optional INIT_B GPIO
fpga: Fix dead store in fpga-bridge.c
fpga: Fix dead store fpga-mgr.c
fpga: dfl: Use struct_size() in kzalloc()
fpga manager: xilinx-spi: remove unneeded, mistyped variables
fpga manager: xilinx-spi: valid for the 7 Series too
dt-bindings: fpga: xilinx-slave-serial: valid for the 7 Series too
fpga: dfl: afu: convert get_user_pages() --> pin_user_pages()
Vinod writes:
soundwire updates for 5.9-rc1
This contains few core changes and bunch of Intel driver updates:
- Adds definitions for 1.2 spec
- Sanyog left as a MAINTAINER and Bard took his place while Sanyog
is a reviewer now.
- Intel: Lots of updates to stream/dai handling, wake support and link
synchronization.
* tag 'soundwire-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (31 commits)
Soundwire: intel_init: save Slave(s) _ADR info in sdw_intel_ctx
soundwire: intel: add wake interrupt support
soundwire: intel/cadence: merge Soundwire interrupt handlers/threads
soundwire: intel_init: use EXPORT_SYMBOL_NS
soundwire: intel_init: add implementation of sdw_intel_enable_irq()
soundwire: intel: introduce helper for link synchronization
soundwire: intel: introduce a helper to arm link synchronization
soundwire: intel: revisit SHIM programming sequences.
soundwire: intel: reuse code for wait loops to set/clear bits
soundwire: fix the kernel-doc comment
soundwire: sdw.h: fix indentation
soundwire: sdw.h: fix PRBS/Static_1 swapped definitions
soundwire: intel: don't free dma_data in DAI shutdown
soundwire: cadence: allocate/free dma_data in set_sdw_stream
soundwire: intel: remove stream allocation/free
soundwire: stream: add helper to startup/shutdown streams
soundwire: intel: implement get_sdw_stream() operations
MAINTAINERS: change SoundWire maintainer
soundwire: bus: initialize bus clock base and scale registers
soundwire: extend SDW_SLAVE_ENTRY
...
Instead of hard-coding the location of the L1 PM Substates capability based
on the Device ID, search for it in the extended capabilities list. This
works for any device, as long as it implements the L1 PM Substates
capability correctly, so it doesn't require maintenance as new devices are
added. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200721212336.1159079-5-helgaas@kernel.org
[ minor addition due to differences in my tree - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtsx_pci_read_config_dword() and similar wrappers around the PCI config
accessors add very little value, and they obscure the fact that often we
are accessing standard PCI registers that should be coordinated with the
PCI core.
Remove the wrappers and use the PCI config accessors directly. No
functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200721212336.1159079-4-helgaas@kernel.org
[ fixed up some other instances as original patch was based on old tree - gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of using the driver-specific rtsx_pci_write_config_byte() to update
the PCIe Link Control Register, use pcie_capability_write_word() like the
rest of the kernel does. This makes it easier to maintain ASPM across the
PCI core and drivers.
No functional change intended. I missed this when doing 3d1e7aa80d
("misc: rtsx: Use pcie_capability_clear_and_set_word() for
PCI_EXP_LNKCTL").
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200721212336.1159079-2-helgaas@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds a method to select a suitable sink connected to a given source.
In cases where no sink is defined, the coresight_find_default_sink
routine can search from a given source, through the child connections
until a suitable sink is found.
The suitability is defined in by the sink coresight_dev_subtype on the
CoreSight device, and the distance from the source by counting
connections.
Higher value subtype is preferred - where these are equal, shorter
distance from source is used as a tie-break.
This allows for default sink to be discovered were none is specified
(e.g. perf command line)
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-15-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement a shutdown callback to ensure ETR hardware is
properly shutdown in reboot/shutdown path. This is required
for ETR which has SMMU address translation enabled like on
SC7180 SoC and few others. If the hardware is still accessing
memory after SMMU translation is disabled as part of SMMU
shutdown callback in system reboot or shutdown path, then
IOVAs(I/O virtual address) which it was using will go on the
bus as the physical addresses which might result in unknown
crashes (NoC/interconnect errors). So we make sure from this
shutdown callback that the ETR is shutdown before SMMU translation
is disabled and device_link in SMMU driver will take care of
ordering of shutdown callbacks such that SMMU shutdown callback
is not called before any of its consumer shutdown callbacks.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-13-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some Qualcomm Technologies Inc. SoCs like SC7180, there
exists a hardware errata where the APSS (Application Processor
SubSystem)/CPU watchdog counter is stopped when the trace unit
power up ETM register is set (TRCPDCR.PU = 1). Since the ETMs
share the same power domain as that of respective CPU cores,
they are powered on when the CPU core is powered on. So we can
skip powering up of trace unit after checking for this errata
via new property called "qcom,skip-power-up".
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Co-developed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-4-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When system is suspended in clock stop mode on intel platforms, both
master and slave are in clock stop mode and soundwire bus is taken
over by a glue hardware. The bus message for jack event is processed
by this glue hardware, which will trigger an interrupt to resume audio
pci device. Then audio pci driver will resume soundwire master and slave,
transfer bus ownership to master, finally slave will report jack event
to master and codec driver is triggered to check jack status.
if a slave has been attached to a bus, the slave->dev_num_sticky
should be non-zero, so we can check this value to skip the
ghost devices defined in ACPI table but not populated in hardware.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200716150947.22119-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The existing code uses one pair of interrupt handler/thread per link
but at the hardware level the interrupt is shared. This works fine for
legacy PCI interrupts, but leads to timeouts in MSI (Message-Signaled
Interrupt) mode, likely due to edges being lost.
This patch unifies interrupt handling for all links. The dedicated
handler is removed since we use a common one for all shared interrupt
sources, and the thread function takes care of dealing with interrupt
sources. This partition follows the model used for the SOF IPC on
HDaudio platforms, where similar timeout issues were noticed and doing
all the interrupt handling/clearing in the thread improved
reliability/stability.
Validation results with 4 links active in parallel show a night-and-day
improvement with no timeouts noticed even during stress tests. Latency
and quality of service are not affected by the change - mostly because
events on a SoundWire link are throttled by the bus frame rate
(typically 8..48kHz).
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200716150947.22119-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Somehow the existing code is not aligned with the steps described in
the documentation, refactor code and make sure the register
programming sequences are correct. Also add missing power-up,
power-down and wake capabilities (the last two are used in follow-up
patches but introduced here for consistency).
Some of the SHIM registers exposed fields that are link specific, and
in addition some of the power-related registers (SPA/CPA) take time to
be updated. Uncontrolled access leads to timeouts or errors. Add a
mutex, shared by all links, so that all accesses to such registers are
serialized, and follow a pattern of read-modify-write.
This includes making sure SHIM_SYNC is programmed only once, before
the first master is powered on. We use a 'shim_mask' field, shared
between all links and protected by a mutex, to deal with power-up and
power-down sequences.
Note that the SYNCPRD value is tied only to the XTAL value and not the
current bus frequency or the frame rate.
BugLink: https://github.com/thesofproject/linux/issues/1555
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200716150947.22119-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull perf tooling fixes from Arnaldo Carvalho de Melo:
- Update hashmap.h from libbpf and kvm.h from x86's kernel UAPI.
- Set opt->set in libsubcmd's OPT_CALLBACK_SET(). This fixes
'perf record --switch-output-event event-name' usage"
* tag 'perf-tools-fixes-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
tools arch kvm: Sync kvm headers with the kernel sources
perf tools: Sync hashmap.h with libbpf's
libsubcmd: Fix OPT_CALLBACK_SET()
Pull x86 fixes from Thomas Gleixner:
"A pile of fixes for x86:
- Fix the I/O bitmap invalidation on XEN PV, which was overlooked in
the recent ioperm/iopl rework. This caused the TSS and XEN's I/O
bitmap to get out of sync.
- Use the proper vectors for HYPERV.
- Make disabling of stack protector for the entry code work with GCC
builds which enable stack protector by default. Removing the option
is not sufficient, it needs an explicit -fno-stack-protector to
shut it off.
- Mark check_user_regs() noinstr as it is called from noinstr code.
The missing annotation causes it to be placed in the text section
which makes it instrumentable.
- Add the missing interrupt disable in exc_alignment_check()
- Fixup a XEN_PV build dependency in the 32bit entry code
- A few fixes to make the Clang integrated assembler happy
- Move EFI stub build to the right place for out of tree builds
- Make prepare_exit_to_usermode() static. It's not longer called from
ASM code"
* tag 'x86-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Don't add the EFI stub to targets
x86/entry: Actually disable stack protector
x86/ioperm: Fix io bitmap invalidation on Xen PV
x86: math-emu: Fix up 'cmp' insn for clang ias
x86/entry: Fix vectors to IDTENTRY_SYSVEC for CONFIG_HYPERV
x86/entry: Add compatibility with IAS
x86/entry/common: Make prepare_exit_to_usermode() static
x86/entry: Mark check_user_regs() noinstr
x86/traps: Disable interrupts in exc_aligment_check()
x86/entry/32: Fix XEN_PV build dependency
Pull timer fixes from Thomas Gleixner:
"Two fixes for the timer wheel:
- A timer which is already expired at enqueue time can set the
base->next_expiry value backwards. As a consequence base->clk can
be set back as well. This can lead to timers expiring early. Add a
sanity check to prevent this.
- When a timer is queued with an expiry time beyond the wheel
capacity then it should be queued in the bucket of the last wheel
level which is expiring last.
The code adjusted the expiry time to the maximum wheel capacity,
which is only correct when the wheel clock is 0. Aside of that the
check whether the delta is larger than wheel capacity does not
check the delta, it checks the expiry value itself. As a result
timers can expire at random.
Fix this by checking the right variable and adjust expiry time so
it becomes base->clock plus capacity which places it into the
outmost bucket in the last wheel level"
* tag 'timers-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timer: Fix wheel index calculation on last level
timer: Prevent base->clk from moving backward
Pull scheduler fixes from Thomas Gleixner:
"A set of scheduler fixes:
- Plug a load average accounting race which was introduced with a
recent optimization casing load average to show bogus numbers.
- Fix the rseq CPU id initialization for new tasks. sched_fork() does
not update the rseq CPU id so the id is the stale id of the parent
task, which can cause user space data corruption.
- Handle a 0 return value of task_h_load() correctly in the load
balancer, which does not decrease imbalance and therefore pulls
until the maximum number of loops is reached, which might be all
tasks just created by a fork bomb"
* tag 'sched-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: handle case of task_h_load() returning 0
sched: Fix unreliable rseq cpu_id for new tasks
sched: Fix loadavg accounting race
Pull irq fixes from Thomas Gleixner:
"Two fixes for the interrupt subsystem:
- Make the handling of the firmware node consistent and do not free
the node after the domain has been created successfully. The core
code stores a pointer to it which can lead to a use after free or
double free.
This used to "work" because the pointer was not stored when the
initial code was written, but at some point later it was required
to store it. Of course nobody noticed that the existing users break
that way.
- Handle affinity setting on inactive interrupts correctly when
hierarchical irq domains are enabled.
When interrupts are inactive with the modern hierarchical irqdomain
design, the interrupt chips are not necessarily in a state where
affinity changes can be handled. The legacy irq chip design allowed
this because interrupts are immediately fully initialized at
allocation time. X86 has a hacky workaround for this, but other
implementations do not.
This cased malfunction on GIC-V3. Instead of playing whack a mole
to find all affected drivers, change the core code to store the
requested affinity setting and then establish it when the interrupt
is allocated, which makes the X86 hack go away"
* tag 'irq-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/affinity: Handle affinity setting on inactive interrupts correctly
irqdomain/treewide: Keep firmware node unconditionally allocated
Pull USB fixes from Greg KH:
"Here are a few small USB fixes, and one thunderbolt fix, for 5.8-rc6.
Nothing huge in here, just the normal collection of gadget, dwc2/3,
serial, and other minor USB driver fixes and id additions. Full
details are in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: iuu_phoenix: fix memory corruption
USB: c67x00: fix use after free in c67x00_giveback_urb
usb: gadget: function: fix missing spinlock in f_uac1_legacy
usb: gadget: udc: atmel: fix uninitialized read in debug printk
usb: gadget: udc: atmel: remove outdated comment in usba_ep_disable()
usb: dwc2: Fix shutdown callback in platform
usb: cdns3: trace: fix some endian issues
usb: cdns3: ep0: fix some endian issues
usb: gadget: udc: gr_udc: fix memleak on error handling path in gr_ep_init()
usb: gadget: fix langid kernel-doc warning in usbstring.c
usb: dwc3: pci: add support for the Intel Jasper Lake
usb: dwc3: pci: add support for the Intel Tiger Lake PCH -H variant
usb: chipidea: core: add wakeup support for extcon
USB: serial: option: add Quectel EG95 LTE modem
thunderbolt: Fix path indices used in USB3 tunnel discovery
USB: serial: ch341: add new Product ID for CH340
USB: serial: option: add GosunCn GM500 series
USB: serial: cypress_m8: enable Simply Automated UPB PIM
Pull dma-mapping fixes from Christoph Hellwig:
"Ensure we always have fully addressable memory in the dma coherent
pool (Nicolas Saenz Julienne)"
* tag 'dma-mapping-5.8-6' of git://git.infradead.org/users/hch/dma-mapping:
dma-pool: do not allocate pool memory from CMA
dma-pool: make sure atomic pool suits device
dma-pool: introduce dma_guess_pool()
dma-pool: get rid of dma_in_atomic_pool()
dma-direct: provide function to check physical memory area validity
vmlinux-objs-y is added to targets, which currently means that the EFI
stub gets added to the targets as well. It shouldn't be added since it
is built elsewhere.
This confuses Makefile.build which interprets the EFI stub as a target
$(obj)/$(objtree)/drivers/firmware/efi/libstub/lib.a
and will create drivers/firmware/efi/libstub/ underneath
arch/x86/boot/compressed, to hold this supposed target, if building
out-of-tree. [0]
Fix this by pulling the stub out of vmlinux-objs-y into efi-obj-y.
[0] See scripts/Makefile.build near the end:
# Create directories for object files if they do not exist
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lkml.kernel.org/r/20200715032631.1562882-1-nivedita@alum.mit.edu
