In __cvdso_clock_getres_time32(), when clock_getres_fallback()
fails, it's not required to update the struct timespec res.
Signed-off-by: Chiawei Wang <chiaweiwang@google.com>
Reviewed-by: Mark Salyzyn <salyzyn@google.com>
Bug: 159086668
Bug: 154668398
Test: run cts -m CtsBionicTestCases -t time#clock_getres_unknown
Change-Id: Ibb7279d4520658d5c8be76e721249d3c62267d9f
This reverts commit 98261f39e9
because it was only needed for sdcardfs, which has now been removed.
Bug: 157700134
Bug: 142275883
Change-Id: Iaf22521ef47d48ce9c9c0604a8b2412e3b8c1faa
Signed-off-by: Eric Biggers <ebiggers@google.com>
The abi.report didn't have any changes.
Signed-off-by: Will McVicker <willmcvicker@google.com>
Bug: 160113355
Change-Id: I245133bef124fd6d2223da9ad9094e9b30e532a6
This reverts commit 171b4c309c as sdcardfs
is no longer part of the kernel tree.
Bug: 157700134
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ia049e7149bf31d3fbc73bfdc1549dab780288963
This reverts commit efd3d77bf9 as sdcardfs
is no longer in the tree.
Bug: 157700134
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I2148285290cd52b28b9282fc50c9acf015aa5a29
This reverts commit c1d30dd04e as sdcardfs
is no longer in the tree.
Bug: 157700134
Cc: Alistair Strachan <astrachan@google.com>
Cc: Yongqin Liu <yongqin.liu@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I88da5b222c6dcda0900da12ccb54122a723d3f6c
It's no longer needed on Android devices, so remove sdcardfs core code,
and a bunch of exports that were only added so that it could be built as
a module.
Bug: 157700134
Cc: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ic75a8cb6ed7ca7249baea4309579273e57be28ed
This reverts commit 2d50acd7db which is
commit f0bd62b640 upstream as it changes
the in-kernel ABI in a way we are not ready to handle just yet.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I0f128103f8d1219ece75ed14106cbd079d3bd2f4
Changes in 4.19.130
power: supply: bq24257_charger: Replace depends on REGMAP_I2C with select
clk: sunxi: Fix incorrect usage of round_down()
ASoC: tegra: tegra_wm8903: Support nvidia, headset property
i2c: piix4: Detect secondary SMBus controller on AMD AM4 chipsets
iio: pressure: bmp280: Tolerate IRQ before registering
remoteproc: Fix IDR initialisation in rproc_alloc()
clk: qcom: msm8916: Fix the address location of pll->config_reg
backlight: lp855x: Ensure regulators are disabled on probe failure
ASoC: davinci-mcasp: Fix dma_chan refcnt leak when getting dma type
ARM: integrator: Add some Kconfig selections
scsi: qedi: Check for buffer overflow in qedi_set_path()
ALSA: hda/realtek - Introduce polarity for micmute LED GPIO
ALSA: isa/wavefront: prevent out of bounds write in ioctl
PCI: Allow pci_resize_resource() for devices on root bus
scsi: qla2xxx: Fix issue with adapter's stopping state
iio: bmp280: fix compensation of humidity
f2fs: report delalloc reserve as non-free in statfs for project quota
i2c: pxa: clear all master action bits in i2c_pxa_stop_message()
clk: samsung: Mark top ISP and CAM clocks on Exynos542x as critical
usblp: poison URBs upon disconnect
serial: 8250: Fix max baud limit in generic 8250 port
dm mpath: switch paths in dm_blk_ioctl() code path
PCI: aardvark: Don't blindly enable ASPM L0s and don't write to read-only register
ps3disk: use the default segment boundary
vfio/pci: fix memory leaks in alloc_perm_bits()
RDMA/mlx5: Add init2init as a modify command
m68k/PCI: Fix a memory leak in an error handling path
gpio: dwapb: Call acpi_gpiochip_free_interrupts() on GPIO chip de-registration
mfd: wm8994: Fix driver operation if loaded as modules
scsi: lpfc: Fix lpfc_nodelist leak when processing unsolicited event
clk: clk-flexgen: fix clock-critical handling
powerpc/perf/hv-24x7: Fix inconsistent output values incase multiple hv-24x7 events run
nfsd: Fix svc_xprt refcnt leak when setup callback client failed
PCI: vmd: Filter resource type bits from shadow register
powerpc/crashkernel: Take "mem=" option into account
pwm: img: Call pm_runtime_put() in pm_runtime_get_sync() failed case
yam: fix possible memory leak in yam_init_driver
NTB: ntb_pingpong: Choose doorbells based on port number
NTB: Fix the default port and peer numbers for legacy drivers
mksysmap: Fix the mismatch of '.L' symbols in System.map
apparmor: fix introspection of of task mode for unconfined tasks
apparmor: check/put label on apparmor_sk_clone_security()
ASoC: meson: add missing free_irq() in error path
scsi: sr: Fix sr_probe() missing deallocate of device minor
scsi: ibmvscsi: Don't send host info in adapter info MAD after LPM
apparmor: fix nnp subset test for unconfined
x86/purgatory: Disable various profiling and sanitizing options
staging: greybus: fix a missing-check bug in gb_lights_light_config()
arm64: dts: mt8173: fix unit name warnings
scsi: qedi: Do not flush offload work if ARP not resolved
ARM: dts: sun8i-h2-plus-bananapi-m2-zero: Fix led polarity
gpio: dwapb: Append MODULE_ALIAS for platform driver
scsi: qedf: Fix crash when MFW calls for protocol stats while function is still probing
pinctrl: rza1: Fix wrong array assignment of rza1l_swio_entries
firmware: qcom_scm: fix bogous abuse of dma-direct internals
staging: gasket: Fix mapping refcnt leak when put attribute fails
staging: gasket: Fix mapping refcnt leak when register/store fails
ALSA: usb-audio: Improve frames size computation
ALSA: usb-audio: Fix racy list management in output queue
s390/qdio: put thinint indicator after early error
tty: hvc: Fix data abort due to race in hvc_open
slimbus: ngd: get drvdata from correct device
thermal/drivers/ti-soc-thermal: Avoid dereferencing ERR_PTR
usb: dwc3: gadget: Properly handle failed kick_transfer
staging: sm750fb: add missing case while setting FB_VISUAL
PCI: v3-semi: Fix a memory leak in v3_pci_probe() error handling paths
i2c: pxa: fix i2c_pxa_scream_blue_murder() debug output
serial: amba-pl011: Make sure we initialize the port.lock spinlock
drivers: base: Fix NULL pointer exception in __platform_driver_probe() if a driver developer is foolish
PCI: rcar: Fix incorrect programming of OB windows
PCI/ASPM: Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges
scsi: qla2xxx: Fix warning after FC target reset
power: supply: lp8788: Fix an error handling path in 'lp8788_charger_probe()'
power: supply: smb347-charger: IRQSTAT_D is volatile
scsi: mpt3sas: Fix double free warnings
pinctrl: rockchip: fix memleak in rockchip_dt_node_to_map
dlm: remove BUG() before panic()
clk: ti: composite: fix memory leak
PCI: Fix pci_register_host_bridge() device_register() error handling
powerpc/64: Don't initialise init_task->thread.regs
tty: n_gsm: Fix SOF skipping
tty: n_gsm: Fix waking up upper tty layer when room available
HID: Add quirks for Trust Panora Graphic Tablet
ipmi: use vzalloc instead of kmalloc for user creation
powerpc/pseries/ras: Fix FWNMI_VALID off by one
powerpc/ps3: Fix kexec shutdown hang
vfio-pci: Mask cap zero
usb/ohci-platform: Fix a warning when hibernating
drm/msm/mdp5: Fix mdp5_init error path for failed mdp5_kms allocation
ASoC: Intel: bytcr_rt5640: Add quirk for Toshiba Encore WT8-A tablet
USB: host: ehci-mxc: Add error handling in ehci_mxc_drv_probe()
tty: n_gsm: Fix bogus i++ in gsm_data_kick
fpga: dfl: afu: Corrected error handling levels
clk: samsung: exynos5433: Add IGNORE_UNUSED flag to sclk_i2s1
scsi: target: tcmu: Userspace must not complete queued commands
arm64: tegra: Fix ethernet phy-mode for Jetson Xavier
powerpc/64s/pgtable: fix an undefined behaviour
dm zoned: return NULL if dmz_get_zone_for_reclaim() fails to find a zone
PCI/PTM: Inherit Switch Downstream Port PTM settings from Upstream Port
PCI: dwc: Fix inner MSI IRQ domain registration
IB/cma: Fix ports memory leak in cma_configfs
watchdog: da9062: No need to ping manually before setting timeout
usb: dwc2: gadget: move gadget resume after the core is in L0 state
USB: gadget: udc: s3c2410_udc: Remove pointless NULL check in s3c2410_udc_nuke
usb: gadget: lpc32xx_udc: don't dereference ep pointer before null check
usb: gadget: fix potential double-free in m66592_probe.
usb: gadget: Fix issue with config_ep_by_speed function
RDMA/iw_cxgb4: cleanup device debugfs entries on ULD remove
x86/apic: Make TSC deadline timer detection message visible
ASoC: fix incomplete error-handling in img_i2s_in_probe.
scsi: target: tcmu: Fix a use after free in tcmu_check_expired_queue_cmd()
clk: bcm2835: Fix return type of bcm2835_register_gate
scsi: ufs-qcom: Fix scheduling while atomic issue
KVM: PPC: Book3S HV: Ignore kmemleak false positives
clk: sprd: return correct type of value for _sprd_pll_recalc_rate
net: sunrpc: Fix off-by-one issues in 'rpc_ntop6'
NFSv4.1 fix rpc_call_done assignment for BIND_CONN_TO_SESSION
of: Fix a refcounting bug in __of_attach_node_sysfs()
powerpc/4xx: Don't unmap NULL mbase
extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()'
ASoC: fsl_asrc_dma: Fix dma_chan leak when config DMA channel failed
vfio/mdev: Fix reference count leak in add_mdev_supported_type
rxrpc: Adjust /proc/net/rxrpc/calls to display call->debug_id not user_ID
openrisc: Fix issue with argument clobbering for clone/fork
gfs2: Allow lock_nolock mount to specify jid=X
scsi: iscsi: Fix reference count leak in iscsi_boot_create_kobj
scsi: ufs: Don't update urgent bkops level when toggling auto bkops
pinctrl: imxl: Fix an error handling path in 'imx1_pinctrl_core_probe()'
pinctrl: freescale: imx: Fix an error handling path in 'imx_pinctrl_probe()'
crypto: omap-sham - add proper load balancing support for multicore
geneve: change from tx_error to tx_dropped on missing metadata
lib/zlib: remove outdated and incorrect pre-increment optimization
include/linux/bitops.h: avoid clang shift-count-overflow warnings
elfnote: mark all .note sections SHF_ALLOC
selftests/vm/pkeys: fix alloc_random_pkey() to make it really random
blktrace: use errno instead of bi_status
blktrace: fix endianness in get_pdu_int()
blktrace: fix endianness for blk_log_remap()
gfs2: fix use-after-free on transaction ail lists
ntb_perf: pass correct struct device to dma_alloc_coherent
ntb_tool: pass correct struct device to dma_alloc_coherent
NTB: ntb_tool: reading the link file should not end in a NULL byte
NTB: Revert the change to use the NTB device dev for DMA allocations
NTB: perf: Don't require one more memory window than number of peers
NTB: perf: Fix support for hardware that doesn't have port numbers
NTB: perf: Fix race condition when run with ntb_test
NTB: ntb_test: Fix bug when counting remote files
drivers/perf: hisi: Fix wrong value for all counters enable
selftests/net: in timestamping, strncpy needs to preserve null byte
afs: Fix memory leak in afs_put_sysnames()
ASoC: core: only convert non DPCM link to DPCM link
ASoC: Intel: bytcr_rt5640: Add quirk for Toshiba Encore WT10-A tablet
ASoC: rt5645: Add platform-data for Asus T101HA
drm/sun4i: hdmi ddc clk: Fix size of m divider
scsi: acornscsi: Fix an error handling path in acornscsi_probe()
x86/idt: Keep spurious entries unset in system_vectors
net/filter: Permit reading NET in load_bytes_relative when MAC not set
xdp: Fix xsk_generic_xmit errno
usb/xhci-plat: Set PM runtime as active on resume
usb: host: ehci-platform: add a quirk to avoid stuck
usb/ehci-platform: Set PM runtime as active on resume
perf report: Fix NULL pointer dereference in hists__fprintf_nr_sample_events()
ext4: stop overwrite the errcode in ext4_setup_super
bcache: fix potential deadlock problem in btree_gc_coalesce
afs: Fix non-setting of mtime when writing into mmap
afs: afs_write_end() should change i_size under the right lock
block: Fix use-after-free in blkdev_get()
arm64: hw_breakpoint: Don't invoke overflow handler on uaccess watchpoints
libata: Use per port sync for detach
drm: encoder_slave: fix refcouting error for modules
drm/dp_mst: Reformat drm_dp_check_act_status() a bit
drm/qxl: Use correct notify port address when creating cursor ring
drm/amdgpu: Replace invalid device ID with a valid device ID
selinux: fix double free
ext4: fix partial cluster initialization when splitting extent
ext4: avoid race conditions when remounting with options that change dax
drm/dp_mst: Increase ACT retry timeout to 3s
x86/boot/compressed: Relax sed symbol type regex for LLVM ld.lld
block: nr_sects_write(): Disable preemption on seqcount write
mtd: rawnand: Pass a nand_chip object to nand_scan()
mtd: rawnand: Pass a nand_chip object to nand_release()
mtd: rawnand: diskonchip: Fix the probe error path
mtd: rawnand: sharpsl: Fix the probe error path
mtd: rawnand: xway: Fix the probe error path
mtd: rawnand: orion: Fix the probe error path
mtd: rawnand: oxnas: Add of_node_put()
mtd: rawnand: oxnas: Fix the probe error path
mtd: rawnand: socrates: Fix the probe error path
mtd: rawnand: plat_nand: Fix the probe error path
mtd: rawnand: mtk: Fix the probe error path
mtd: rawnand: tmio: Fix the probe error path
s390: fix syscall_get_error for compat processes
drm/i915: Whitelist context-local timestamp in the gen9 cmdparser
drm/i915/icl+: Fix hotplug interrupt disabling after storm detection
crypto: algif_skcipher - Cap recv SG list at ctx->used
crypto: algboss - don't wait during notifier callback
kprobes: Fix to protect kick_kprobe_optimizer() by kprobe_mutex
e1000e: Do not wake up the system via WOL if device wakeup is disabled
net: octeon: mgmt: Repair filling of RX ring
kretprobe: Prevent triggering kretprobe from within kprobe_flush_task
sched/rt, net: Use CONFIG_PREEMPTION.patch
net: core: device_rename: Use rwsem instead of a seqcount
Revert "dpaa_eth: fix usage as DSA master, try 3"
md: add feature flag MD_FEATURE_RAID0_LAYOUT
kvm: x86: Move kvm_set_mmio_spte_mask() from x86.c to mmu.c
kvm: x86: Fix reserved bits related calculation errors caused by MKTME
KVM: x86/mmu: Set mmio_value to '0' if reserved #PF can't be generated
Linux 4.19.130
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I8fff23470852b747c3d75461b45f9d77460062d3
In current implementation the Linux version string that is attached to
the kernel linux image as well as the all kernel modules includes the
sha1 of the main git project for the kernel.
This Commit adds the BUILD_NUMBER env variable with an 'ab' prefix to
the Linux version string. This maps to both the Linux Image and all
kernel modules version strings.
Bug: 159842160
Bug: 137521202
Test: Build the kernel and test the version string
Change-Id: I4795955f36f477b257ca86495726e24d6b196d05
Signed-off-by: Alex Hong <rurumihong@google.com>
(cherry picked from commit e60f995403c9799dd0dc14d62d77d6698a8a7126)
[willmcvicker: fix uts_len check to include -ab$(BUILD_NUMBER)]
Signed-off-by: Will McVicker <willmcvicker@google.com>
This has fallen out of sync with other whitelists wrt incfs and other
features, breaking boot on arm64.
Bug: 159343293
Signed-off-by: Alistair Delva <adelva@google.com>
Change-Id: I5ee581934e17f9ca1cfeb4fb046ff3c342ccb0c6
Fixes I23ce9e34fa25ae596298b4c03a7b36dd71adba68, which disabled incfs
only for arm64. Disable it for x86 too.
Bug: 156527199
Change-Id: I1926fab17a8ba6bfab299a683138390cad133611
Signed-off-by: Alistair Delva <adelva@google.com>
When frequency limits changed faster than sugov_up_down_rate_limit
permits, the frequency change will be ignored. When a demanding workload
runs with thermal governor which adjusts limits frequently and frequency
relax action missed, the thermal governor will happy to settle (no
further update on limit as thermal condition is maintained). So there
won't be any new limits change. As workload continues to occupy the CPU,
the votes from scheduler is all not updated. All these leads to a
situation where the workload stuck at a low frequency until quits.
If a frequency change is dropped due to rate limit, we should drop the
cache. Besides the above mentioned limits changed case, there are also
other cases when frequency update could be dropped.
Bug: 159936782
Bug: 158863204
Signed-off-by: Wei Wang <wvw@google.com>
Change-Id: I9db69cd3e03f949cfe9a9a416fd33eea3907deec
[ Upstream commit 6129ed877d ]
Set the mmio_value to '0' instead of simply clearing the present bit to
squash a benign warning in kvm_mmu_set_mmio_spte_mask() that complains
about the mmio_value overlapping the lower GFN mask on systems with 52
bits of PA space.
Opportunistically clean up the code and comments.
Cc: stable@vger.kernel.org
Fixes: d43e2675e9 ("KVM: x86: only do L1TF workaround on affected processors")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200527084909.23492-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3ecb59dd4 ]
Intel MKTME repurposes several high bits of physical address as 'keyID'
for memory encryption thus effectively reduces platform's maximum
physical address bits. Exactly how many bits are reduced is configured
by BIOS. To honor such HW behavior, the repurposed bits are reduced from
cpuinfo_x86->x86_phys_bits when MKTME is detected in CPU detection.
Similarly, AMD SME/SEV also reduces physical address bits for memory
encryption, and cpuinfo->x86_phys_bits is reduced too when SME/SEV is
detected, so for both MKTME and SME/SEV, boot_cpu_data.x86_phys_bits
doesn't hold physical address bits reported by CPUID anymore.
Currently KVM treats bits from boot_cpu_data.x86_phys_bits to 51 as
reserved bits, but it's not true anymore for MKTME, since MKTME treats
those reduced bits as 'keyID', but not reserved bits. Therefore
boot_cpu_data.x86_phys_bits cannot be used to calculate reserved bits
anymore, although we can still use it for AMD SME/SEV since SME/SEV
treats the reduced bits differently -- they are treated as reserved
bits, the same as other reserved bits in page table entity [1].
Fix by introducing a new 'shadow_phys_bits' variable in KVM x86 MMU code
to store the effective physical bits w/o reserved bits -- for MKTME,
it equals to physical address reported by CPUID, and for SME/SEV, it is
boot_cpu_data.x86_phys_bits.
Note that for the physical address bits reported to guest should remain
unchanged -- KVM should report physical address reported by CPUID to
guest, but not boot_cpu_data.x86_phys_bits. Because for Intel MKTME,
there's no harm if guest sets up 'keyID' bits in guest page table (since
MKTME only works at physical address level), and KVM doesn't even expose
MKTME to guest. Arguably, for AMD SME/SEV, guest is aware of SEV thus it
should adjust boot_cpu_data.x86_phys_bits when it detects SEV, therefore
KVM should still reports physcial address reported by CPUID to guest.
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Kai Huang <kai.huang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b6f8a06e4 ]
As a prerequisite to fix several SPTE reserved bits related calculation
errors caused by MKTME, which requires kvm_set_mmio_spte_mask() to use
local static variable defined in mmu.c.
Also move call site of kvm_set_mmio_spte_mask() from kvm_arch_init() to
kvm_mmu_module_init() so that kvm_set_mmio_spte_mask() can be static.
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Kai Huang <kai.huang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33f2c35a54 ]
Due to a bug introduced in Linux 3.14 we cannot determine the
correctly layout for a multi-zone RAID0 array - there are two
possibilities.
It is possible to tell the kernel which to chose using a module
parameter, but this can be clumsy to use. It would be best if
the choice were recorded in the metadata.
So add a feature flag for this purpose.
If it is set, then the 'layout' field of the superblock is used
to determine which layout to use.
If this flag is not set, then mddev->layout gets set to -1,
which causes the module parameter to be required.
Acked-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit b145710b69 which is
commit 5d14c304bf upstream.
The patch is not wrong, but the Fixes: tag is. It should have been:
Fixes: 060ad66f97 ("dpaa_eth: change DMA device")
which means that it's fixing a commit which was introduced in:
git describe --tags 060ad66f97
v5.4-rc3-783-g060ad66f9795
which then means it should have not been backported to linux-4.19.y,
where things _were_ working and now they're not.
Reported-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 11d6011c2c ]
Sequence counters write paths are critical sections that must never be
preempted, and blocking, even for CONFIG_PREEMPTION=n, is not allowed.
Commit 5dbe7c178d ("net: fix kernel deadlock with interface rename and
netdev name retrieval.") handled a deadlock, observed with
CONFIG_PREEMPTION=n, where the devnet_rename seqcount read side was
infinitely spinning: it got scheduled after the seqcount write side
blocked inside its own critical section.
To fix that deadlock, among other issues, the commit added a
cond_resched() inside the read side section. While this will get the
non-preemptible kernel eventually unstuck, the seqcount reader is fully
exhausting its slice just spinning -- until TIF_NEED_RESCHED is set.
The fix is also still broken: if the seqcount reader belongs to a
real-time scheduling policy, it can spin forever and the kernel will
livelock.
Disabling preemption over the seqcount write side critical section will
not work: inside it are a number of GFP_KERNEL allocations and mutex
locking through the drivers/base/ :: device_rename() call chain.
>From all the above, replace the seqcount with a rwsem.
Fixes: 5dbe7c178d (net: fix kernel deadlock with interface rename and netdev name retrieval.)
Fixes: 30e6c9fa93 (net: devnet_rename_seq should be a seqcount)
Fixes: c91f6df2db (sockopt: Change getsockopt() of SO_BINDTODEVICE to return an interface name)
Cc: <stable@vger.kernel.org>
Reported-by: kbuild test robot <lkp@intel.com> [ v1 missing up_read() on error exit ]
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> [ v1 missing up_read() on error exit ]
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b38cc704e ]
Ziqian reported lockup when adding retprobe on _raw_spin_lock_irqsave.
My test was also able to trigger lockdep output:
============================================
WARNING: possible recursive locking detected
5.6.0-rc6+ #6 Not tainted
--------------------------------------------
sched-messaging/2767 is trying to acquire lock:
ffffffff9a492798 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_hash_lock+0x52/0xa0
but task is already holding lock:
ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(kretprobe_table_locks[i].lock));
lock(&(kretprobe_table_locks[i].lock));
*** DEADLOCK ***
May be due to missing lock nesting notation
1 lock held by sched-messaging/2767:
#0: ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50
stack backtrace:
CPU: 3 PID: 2767 Comm: sched-messaging Not tainted 5.6.0-rc6+ #6
Call Trace:
dump_stack+0x96/0xe0
__lock_acquire.cold.57+0x173/0x2b7
? native_queued_spin_lock_slowpath+0x42b/0x9e0
? lockdep_hardirqs_on+0x590/0x590
? __lock_acquire+0xf63/0x4030
lock_acquire+0x15a/0x3d0
? kretprobe_hash_lock+0x52/0xa0
_raw_spin_lock_irqsave+0x36/0x70
? kretprobe_hash_lock+0x52/0xa0
kretprobe_hash_lock+0x52/0xa0
trampoline_handler+0xf8/0x940
? kprobe_fault_handler+0x380/0x380
? find_held_lock+0x3a/0x1c0
kretprobe_trampoline+0x25/0x50
? lock_acquired+0x392/0xbc0
? _raw_spin_lock_irqsave+0x50/0x70
? __get_valid_kprobe+0x1f0/0x1f0
? _raw_spin_unlock_irqrestore+0x3b/0x40
? finish_task_switch+0x4b9/0x6d0
? __switch_to_asm+0x34/0x70
? __switch_to_asm+0x40/0x70
The code within the kretprobe handler checks for probe reentrancy,
so we won't trigger any _raw_spin_lock_irqsave probe in there.
The problem is in outside kprobe_flush_task, where we call:
kprobe_flush_task
kretprobe_table_lock
raw_spin_lock_irqsave
_raw_spin_lock_irqsave
where _raw_spin_lock_irqsave triggers the kretprobe and installs
kretprobe_trampoline handler on _raw_spin_lock_irqsave return.
The kretprobe_trampoline handler is then executed with already
locked kretprobe_table_locks, and first thing it does is to
lock kretprobe_table_locks ;-) the whole lockup path like:
kprobe_flush_task
kretprobe_table_lock
raw_spin_lock_irqsave
_raw_spin_lock_irqsave ---> probe triggered, kretprobe_trampoline installed
---> kretprobe_table_locks locked
kretprobe_trampoline
trampoline_handler
kretprobe_hash_lock(current, &head, &flags); <--- deadlock
Adding kprobe_busy_begin/end helpers that mark code with fake
probe installed to prevent triggering of another kprobe within
this code.
Using these helpers in kprobe_flush_task, so the probe recursion
protection check is hit and the probe is never set to prevent
above lockup.
Link: http://lkml.kernel.org/r/158927059835.27680.7011202830041561604.stgit@devnote2
Fixes: ef53d9c5e4 ("kprobes: improve kretprobe scalability with hashed locking")
Cc: Ingo Molnar <mingo@kernel.org>
Cc: "Gustavo A . R . Silva" <gustavoars@kernel.org>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: "Naveen N . Rao" <naveen.n.rao@linux.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Reported-by: "Ziqian SUN (Zamir)" <zsun@redhat.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0c34bb598c upstream.
The removal of mips_swiotlb_ops exposed a problem in octeon_mgmt Ethernet
driver. mips_swiotlb_ops had an mb() after most of the operations and the
removal of the ops had broken the receive functionality of the driver.
My code inspection has shown no other places except
octeon_mgmt_rx_fill_ring() where an explicit barrier would be obviously
missing. The latter function however has to make sure that "ringing the
bell" doesn't happen before RX ring entry is really written.
The patch has been successfully tested on Octeon II.
Fixes: a999933db9 ("MIPS: remove mips_swiotlb_ops")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6bf6be1127 upstream.
Currently the system will be woken up via WOL(Wake On LAN) even if the
device wakeup ability has been disabled via sysfs:
cat /sys/devices/pci0000:00/0000:00:1f.6/power/wakeup
disabled
The system should not be woken up if the user has explicitly
disabled the wake up ability for this device.
This patch clears the WOL ability of this network device if the
user has disabled the wake up ability in sysfs.
Fixes: bc7f75fa97 ("[E1000E]: New pci-express e1000 driver")
Reported-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 77251e41f8 upstream.
When a crypto template needs to be instantiated, CRYPTO_MSG_ALG_REQUEST
is sent to crypto_chain. cryptomgr_schedule_probe() handles this by
starting a thread to instantiate the template, then waiting for this
thread to complete via crypto_larval::completion.
This can deadlock because instantiating the template may require loading
modules, and this (apparently depending on userspace) may need to wait
for the crc-t10dif module (lib/crc-t10dif.c) to be loaded. But
crc-t10dif's module_init function uses crypto_register_notifier() and
therefore takes crypto_chain.rwsem for write. That can't proceed until
the notifier callback has finished, as it holds this semaphore for read.
Fix this by removing the wait on crypto_larval::completion from within
cryptomgr_schedule_probe(). It's actually unnecessary because
crypto_alg_mod_lookup() calls crypto_larval_wait() itself after sending
CRYPTO_MSG_ALG_REQUEST.
This only actually became a problem in v4.20 due to commit b76377543b
("crc-t10dif: Pick better transform if one becomes available"), but the
unnecessary wait was much older.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207159
Reported-by: Mike Gerow <gerow@google.com>
Fixes: 398710379f ("crypto: algapi - Move larval completion into algboss")
Cc: <stable@vger.kernel.org> # v3.6+
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reported-by: Kai Lüke <kai@kinvolk.io>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b3583fca5f upstream.
If both the tracer and the tracee are compat processes, and gprs[2]
is assigned a value by __poke_user_compat, then the higher 32 bits
of gprs[2] are cleared, IS_ERR_VALUE() always returns false, and
syscall_get_error() always returns 0.
Fix the implementation by sign-extending the value for compat processes
the same way as x86 implementation does.
The bug was exposed to user space by commit 201766a20e ("ptrace: add
PTRACE_GET_SYSCALL_INFO request") and detected by strace test suite.
This change fixes strace syscall tampering on s390.
Link: https://lkml.kernel.org/r/20200602180051.GA2427@altlinux.org
Fixes: 753c4dd6a2 ("[S390] ptrace changes")
Cc: Elvira Khabirova <lineprinter@altlinux.org>
Cc: stable@vger.kernel.org # v2.6.28+
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 75e9a330a9 ]
nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.
There is no real Fixes tag applying here as the use of nand_release()
in this driver predates by far the introduction of nand_cleanup() in
commit d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible. However, pointing this commit as the
culprit for backporting purposes makes sense even if this commit is not
introducing any bug.
Fixes: d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-57-miquel.raynal@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a82bbcade ]
nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.
There is no real Fixes tag applying here as the use of nand_release()
in this driver predates the introduction of nand_cleanup() in
commit d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible. However, pointing this commit as the
culprit for backporting purposes makes sense even if this commit is not
introducing any bug.
Fixes: d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-28-miquel.raynal@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5284024b4d ]
nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.
There is no real Fixes tag applying here as the use of nand_release()
in this driver predates by far the introduction of nand_cleanup() in
commit d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible, hence pointing it as the commit to
fix for backporting purposes, even if this commit is not introducing
any bug.
Fixes: d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-43-miquel.raynal@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c6c2e5cc7 ]
nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.
There is no real Fixes tag applying here as the use of nand_release()
in this driver predates by far the introduction of nand_cleanup() in
commit d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible. However, pointing this commit as the
culprit for backporting purposes makes sense even if this commit is not
introducing any bug.
Fixes: d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-51-miquel.raynal@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c436f68bee ]
Each iteration of for_each_child_of_node puts the previous node, but in
the case of a goto from the middle of the loop, there is no put, thus
causing a memory leak. Hence add an of_node_put under a new goto to put
the node at a loop exit.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be238fbf78 ]
nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.
There is no real Fixes tag applying here as the use of nand_release()
in this driver predates by far the introduction of nand_cleanup() in
commit d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible. However, pointing this commit as the
culprit for backporting purposes makes sense even if this commit is not
introducing any bug.
Fixes: d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-34-miquel.raynal@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34531be5e8 ]
nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.
There is no real Fixes tag applying here as the use of nand_release()
in this driver predates the introduction of nand_cleanup() in
commit d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible. However, pointing this commit as the
culprit for backporting purposes makes sense even if this commit is not
introducing any bug.
Fixes: d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-61-miquel.raynal@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f44b3275b ]
nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.
There is no Fixes tag applying here as the use of nand_release()
in this driver predates by far the introduction of nand_cleanup() in
commit d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible. However, pointing this commit as the
culprit for backporting purposes makes sense.
Fixes: d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-49-miquel.raynal@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5be12e459 ]
Not sure nand_cleanup() is the right function to call here but in any
case it is not nand_release(). Indeed, even a comment says that
calling nand_release() is a bit of a hack as there is no MTD device to
unregister. So switch to nand_cleanup() for now and drop this
comment.
There is no Fixes tag applying here as the use of nand_release()
in this driver predates by far the introduction of nand_cleanup() in
commit d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible. However, pointing this commit as the
culprit for backporting purposes makes sense even if it did not intruce
any bug.
Fixes: d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-13-miquel.raynal@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59ac276f22 ]
Let's make the raw NAND API consistent by patching all helpers to
take a nand_chip object instead of an mtd_info one.
Now is nand_release()'s turn.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00ad378f30 ]
Let's make the raw NAND API consistent by patching all helpers to take
a nand_chip object instead of an mtd_info one.
We start with nand_scan().
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15b81ce5ab ]
For optimized block readers not holding a mutex, the "number of sectors"
64-bit value is protected from tearing on 32-bit architectures by a
sequence counter.
Disable preemption before entering that sequence counter's write side
critical section. Otherwise, the read side can preempt the write side
section and spin for the entire scheduler tick. If the reader belongs to
a real-time scheduling class, it can spin forever and the kernel will
livelock.
Fixes: c83f6bf98d ("block: add partition resize function to blkpg ioctl")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
