commit 0af462f19e upstream.
The recent fix to ensure atomicity of lookup and allocation inadvertently
broke the pool refill mechanism.
Prior to that change debug_objects_activate() and debug_objecs_assert_init()
invoked debug_objecs_init() to set up the tracking object for statically
initialized objects. That's not longer the case and debug_objecs_init() is
now the only place which does pool refills.
Depending on the number of statically initialized objects this can be
enough to actually deplete the pool, which was observed by Ido via a
debugobjects OOM warning.
Restore the old behaviour by adding explicit refill opportunities to
debug_objects_activate() and debug_objecs_assert_init().
Fixes: 63a759694e ("debugobject: Prevent init race with static objects")
Reported-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/871qk05a9d.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 38d11da522 upstream.
Commit fa247089de ("dm: requeue IO if mapping table not yet available")
added a detection of whether the mapping table is available in the IO
submission process. If the mapping table is unavailable, it returns
BLK_STS_RESOURCE and requeues the IO.
This can lead to the following deadlock problem:
dm create mount
ioctl(DM_DEV_CREATE_CMD)
ioctl(DM_TABLE_LOAD_CMD)
do_mount
vfs_get_tree
ext4_get_tree
get_tree_bdev
sget_fc
alloc_super
// got &s->s_umount
down_write_nested(&s->s_umount, ...);
ext4_fill_super
ext4_load_super
ext4_read_bh
submit_bio
// submit and wait io end
ioctl(DM_DEV_SUSPEND_CMD)
dev_suspend
do_resume
dm_suspend
__dm_suspend
lock_fs
freeze_bdev
get_active_super
grab_super
// wait for &s->s_umount
down_write(&s->s_umount);
dm_swap_table
__bind
// set md->map(can't get here)
IO will be continuously requeued while holding the lock since mapping
table is NULL. At the same time, mapping table won't be set since the
lock is not available.
Like request-based DM, bio-based DM also has the same problem.
It's not proper to just abort IO if the mapping table not available.
So clear DM_SKIP_LOCKFS_FLAG when the mapping table is NULL, this
allows the DM table to be loaded and the IO submitted upon resume.
Fixes: fa247089de ("dm: requeue IO if mapping table not yet available")
Cc: stable@vger.kernel.org
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3d32aaa7e6 upstream.
syzkaller found the following problematic rwsem locking (with write
lock already held):
down_read+0x9d/0x450 kernel/locking/rwsem.c:1509
dm_get_inactive_table+0x2b/0xc0 drivers/md/dm-ioctl.c:773
__dev_status+0x4fd/0x7c0 drivers/md/dm-ioctl.c:844
table_clear+0x197/0x280 drivers/md/dm-ioctl.c:1537
In table_clear, it first acquires a write lock
https://elixir.bootlin.com/linux/v6.2/source/drivers/md/dm-ioctl.c#L1520
down_write(&_hash_lock);
Then before the lock is released at L1539, there is a path shown above:
table_clear -> __dev_status -> dm_get_inactive_table -> down_read
https://elixir.bootlin.com/linux/v6.2/source/drivers/md/dm-ioctl.c#L773
down_read(&_hash_lock);
It tries to acquire the same read lock again, resulting in the deadlock
problem.
Fix this by moving table_clear()'s __dev_status() call to after its
up_write(&_hash_lock);
Cc: stable@vger.kernel.org
Reported-by: Zheng Zhang <zheng.zhang@email.ucr.edu>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e8c5d45f82 upstream.
In verity_end_io(), if bi_status is not BLK_STS_OK, it can be return
directly. But if FEC configured, it is desired to correct the data page
through verity_verify_io. And the return value will be converted to
blk_status and passed to verity_finish_io().
BTW, when a bit is set in v->validated_blocks, verity_verify_io() skips
verification regardless of I/O error for the corresponding bio. In this
case, the I/O error could not be returned properly, and as a result,
there is a problem that abnormal data could be read for the
corresponding block.
To fix this problem, when an I/O error occurs, do not skip verification
even if the bit related is set in v->validated_blocks.
Fixes: 843f38d382 ("dm verity: add 'check_at_most_once' option to only validate hashes once")
Cc: stable@vger.kernel.org
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Yeongjin Gil <youngjin.gil@samsung.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 604e6681e1 upstream.
Since the introduction of scrub interface, the only flag that we support
is BTRFS_SCRUB_READONLY. Thus there is no sanity checks, if there are
some undefined flags passed in, we just ignore them.
This is problematic if we want to introduce new scrub flags, as we have
no way to determine if such flags are supported.
Address the problem by introducing a check for the flags, and if
unsupported flags are set, return -EOPNOTSUPP to inform the user space.
This check should be backported for all supported kernels before any new
scrub flags are introduced.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d46e04ccd4 upstream.
Always run the entire init sequence (rtl8xxxu_init_device()) for
RTL8192EU. It's what the vendor driver does too.
This fixes a bug where the device is unable to connect after
rebooting:
wlp3s0f3u2: send auth to ... (try 1/3)
wlp3s0f3u2: send auth to ... (try 2/3)
wlp3s0f3u2: send auth to ... (try 3/3)
wlp3s0f3u2: authentication with ... timed out
Rebooting leaves the device powered on (partially? at least the
firmware is still running), but not really in a working state.
Cc: stable@vger.kernel.org
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Jes Sorensen <jes@trained-monkey.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/4eb111a9-d4c4-37d0-b376-4e202de7153c@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e0489f6e22 upstream.
If mtd_otp_nvmem_add() fails, the partitions won't be removed
because there is simply no call to del_mtd_partitions().
Unfortunately, add_mtd_partitions() will print all partitions to
the kernel console. If mtd_otp_nvmem_add() returns -EPROBE_DEFER
this would print the partitions multiple times to the kernel
console. Instead move mtd_otp_nvmem_add() to the beginning of the
function.
Fixes: 4b361cfa86 ("mtd: core: add OTP nvmem provider support")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230308082021.870459-3-michael@walle.cc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1cd9ceaa52 upstream.
Commit c048b60d39 ("mtd: core: provide unique name for nvmem device")
tries to give the nvmem device a unique name, but fails badly if the mtd
device doesn't have a "struct device" associated with it, i.e. if
CONFIG_MTD_PARTITIONED_MASTER is not set. This will result in the name
"(null)-user-otp", which is not unique. It seems the best we can do is
to use the compatible name together with a unique identifier added by
the nvmem subsystem by using NVMEM_DEVID_AUTO.
Fixes: c048b60d39 ("mtd: core: provide unique name for nvmem device")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230308082021.870459-1-michael@walle.cc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a405c6f022 upstream.
init_resync() inits mempool and sets conf->have_replacemnt at the beginning
of sync, close_sync() frees the mempool when sync is completed.
After [1] recovery might be skipped and init_resync() is called but
close_sync() is not. null-ptr-deref occurs with r10bio->dev[i].repl_bio.
The following is one way to reproduce the issue.
1) create a array, wait for resync to complete, mddev->recovery_cp is set
to MaxSector.
2) recovery is woken and it is skipped. conf->have_replacement is set to
0 in init_resync(). close_sync() not called.
3) some io errors and rdev A is set to WantReplacement.
4) a new device is added and set to A's replacement.
5) recovery is woken, A have replacement, but conf->have_replacemnt is
0. r10bio->dev[i].repl_bio will not be alloced and null-ptr-deref
occurs.
Fix it by not calling init_resync() if recovery skipped.
[1] commit 7e83ccbecd ("md/raid10: Allow skipping recovery when clean arrays are assembled")
Fixes: 7e83ccbecd ("md/raid10: Allow skipping recovery when clean arrays are assembled")
Cc: stable@vger.kernel.org
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230222041000.3341651-3-linan666@huaweicloud.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 28a65b49eb upstream.
According to syzbot's report, mark_buffer_dirty() called from
nilfs_segctor_do_construct() outputs a warning with some patterns after
nilfs2 detects metadata corruption and degrades to read-only mode.
After such read-only degeneration, page cache data may be cleared through
nilfs_clear_dirty_page() which may also clear the uptodate flag for their
buffer heads. However, even after the degeneration, log writes are still
performed by unmount processing etc., which causes mark_buffer_dirty() to
be called for buffer heads without the "uptodate" flag and causes the
warning.
Since any writes should not be done to a read-only file system in the
first place, this fixes the warning in mark_buffer_dirty() by letting
nilfs_segctor_do_construct() abort early if in read-only mode.
This also changes the retry check of nilfs_segctor_write_out() to avoid
unnecessary log write retries if it detects -EROFS that
nilfs_segctor_do_construct() returned.
Link: https://lkml.kernel.org/r/20230427011526.13457-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+2af3bc9585be7f23f290@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=2af3bc9585be7f23f290
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6e3220ba33 upstream.
Fix the argument pointer (ap) to point to real-mode memory
instead of virtual memory.
It's interesting that this issue hasn't shown up earlier, as this could
have happened with any 64-bit PDC ROM code.
I just noticed it because I suddenly faced a HPMC while trying to execute
the 64-bit STI ROM code of an Visualize-FXe graphics card for the STI
text console.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d7f74e9a91 ]
If the data version returned from the server is larger than expected,
the local data is invalidated, but we may still want to note the remote
file size.
Since we're setting change_size, we have to also set data_changed
for the i_size to get updated.
Fixes: 3f4aa98181 ("afs: Fix EOF corruption")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f376c47966 ]
It seems that this driver was developed based on preliminary documentation.
Report the correct names for all TQMxE39x variants, as they are used by
the released hardware revisions:
- Fix names for TQMxE39C1/C2 board IDs
- Distinguish TQMxE39M and TQMxE39S, which use the same board ID
The TQMxE39M/S are distinguished using the SAUC (Sanctioned Alternate
Uses Configuration) register of the GPIO controller. This also prepares
for the correct handling of the differences between the GPIO controllers
of our COMe and SMARC modules.
Fixes: 2f17dd34ff ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/aca9a7cb42a85181bcb456c437554d2728e708ec.1676892223.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1be1b23696 ]
The I2C_DETECT register is at IO port 0x1a7, which is outside the range
passed to devm_ioport_map() for io_base, and was only working because
there aren't actually any bounds checks for IO port accesses.
Extending the range does not seem like a good solution here, as it would
then conflict with the IO resource assigned to the I2C controller. As
this is just a one-off access during probe, use a simple inb() instead.
While we're at it, drop the unused define TQMX86_REG_I2C_INT_EN.
Fixes: 2f17dd34ff ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/e8300a30f0791afb67d79db8089fb6004855f378.1676892223.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b63e5cb94a ]
The transfer descriptors were wrongly moved to the free descriptors list
before calling the tx desc callback. As the DMA engine drivers drop any
locks before calling the callback function, txd could be taken again,
resulting in its callback called prematurely. Fix the race for the tx desc
callback by moving the xfer desc into the free desc list after the
callback is invoked.
Fixes: e1f7c9eee7 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-6-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a251994a44 ]
The dw-edma driver stops after processing a DMA request even if a request
remains in the issued queue, which is not the expected behavior. The DMA
engine API requires continuous processing.
Add a trigger to start after one processing finished if there are requests
remain.
Fixes: e63d79d1ff ("dmaengine: Add Synopsys eDMA IP core driver")
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Link: https://lore.kernel.org/r/20230411101758.438472-1-mie@igel.co.jp
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b16c310115 ]
The DISP_PWM controller's default behavior is to always use register
double buffering: all reads/writes are then performed on shadow
registers instead of working registers and this becomes an issue
in case our chosen configuration in Linux is different from the
default (or from the one that was pre-applied by the bootloader).
An example of broken behavior is when the controller is configured
to use shadow registers, but this driver wants to configure it
otherwise: what happens is that the .get_state() callback is called
right after registering the pwmchip and checks whether the PWM is
enabled by reading the DISP_PWM_EN register;
At this point, if shadow registers are enabled but their content
was not committed before booting Linux, we are *not* reading the
current PWM enablement status, leading to the kernel knowing that
the hardware is actually enabled when, in reality, it's not.
The aforementioned issue emerged since this driver was fixed with
commit 0b5ef3429d ("pwm: mtk-disp: Fix the parameters calculated
by the enabled flag of disp_pwm") making it to read the enablement
status from the right register.
Configure the controller in the .get_state() callback to avoid
this desync issue and get the backlight properly working again.
Fixes: 3f2b167349 ("pwm: mtk-disp: Implement atomic API .get_state()")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Tested-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1087c29e9 ]
Commit 96f524105b ("leds: tca6507: use fwnode API instead of OF")
changed to fwnode API but did not take into account that a missing property
"linux,default-trigger" now seems to return an error and as a side effect
sets value to -1. This seems to be different from of_get_property() which
always returned NULL in any case of error.
Neglecting this side-effect leads to
[ 11.201965] Unable to handle kernel paging request at virtual address ffffffff when read
in the strcmp() of led_trigger_set_default() if there is no led-trigger
defined in the DTS.
I don't know if this was recently introduced somewhere in the fwnode lib
or if the effect was missed in initial testing. Anyways it seems to be a
bug to ignore the error return value of an optional value here in the
driver.
Fixes: 96f524105b ("leds: tca6507: use fwnode API instead of OF")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/cbae7617db83113de726fcc423a805ebaa1bfca6.1680433978.git.hns@goldelico.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a61079efc8 ]
REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.
Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.
Therefore, change the use of "depends on REGMAP" to "select REGMAP".
Fixes: 3fce8e1eb9 ("leds: TI LMU: Add common code for TI LMU devices")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230226053953.4681-5-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 835659598c ]
Syzbot found the following issue:
loop0: detected capacity change from 0 to 2048
EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 without journal. Quota mode: none.
==================================================================
BUG: KASAN: use-after-free in ext4_ext_binsearch_idx fs/ext4/extents.c:768 [inline]
BUG: KASAN: use-after-free in ext4_find_extent+0x76e/0xd90 fs/ext4/extents.c:931
Read of size 4 at addr ffff888073644750 by task syz-executor420/5067
CPU: 0 PID: 5067 Comm: syz-executor420 Not tainted 6.2.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1b1/0x290 lib/dump_stack.c:106
print_address_description+0x74/0x340 mm/kasan/report.c:306
print_report+0x107/0x1f0 mm/kasan/report.c:417
kasan_report+0xcd/0x100 mm/kasan/report.c:517
ext4_ext_binsearch_idx fs/ext4/extents.c:768 [inline]
ext4_find_extent+0x76e/0xd90 fs/ext4/extents.c:931
ext4_clu_mapped+0x117/0x970 fs/ext4/extents.c:5809
ext4_insert_delayed_block fs/ext4/inode.c:1696 [inline]
ext4_da_map_blocks fs/ext4/inode.c:1806 [inline]
ext4_da_get_block_prep+0x9e8/0x13c0 fs/ext4/inode.c:1870
ext4_block_write_begin+0x6a8/0x2290 fs/ext4/inode.c:1098
ext4_da_write_begin+0x539/0x760 fs/ext4/inode.c:3082
generic_perform_write+0x2e4/0x5e0 mm/filemap.c:3772
ext4_buffered_write_iter+0x122/0x3a0 fs/ext4/file.c:285
ext4_file_write_iter+0x1d0/0x18f0
call_write_iter include/linux/fs.h:2186 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x7dc/0xc50 fs/read_write.c:584
ksys_write+0x177/0x2a0 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f4b7a9737b9
RSP: 002b:00007ffc5cac3668 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f4b7a9737b9
RDX: 00000000175d9003 RSI: 0000000020000200 RDI: 0000000000000004
RBP: 00007f4b7a933050 R08: 0000000000000000 R09: 0000000000000000
R10: 000000000000079f R11: 0000000000000246 R12: 00007f4b7a9330e0
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Above issue is happens when enable bigalloc and inline data feature. As
commit 131294c35e fixed delayed allocation bug in ext4_clu_mapped for
bigalloc + inline. But it only resolved issue when has inline data, if
inline data has been converted to extent(ext4_da_convert_inline_data_to_extent)
before writepages, there is no EXT4_STATE_MAY_INLINE_DATA flag. However
i_data is still store inline data in this scene. Then will trigger UAF
when find extent.
To resolve above issue, there is need to add judge "ext4_has_inline_data(inode)"
in ext4_clu_mapped().
Fixes: 131294c35e ("ext4: fix delayed allocation bug in ext4_clu_mapped for bigalloc + inline")
Reported-by: syzbot+bf4bb7731ef73b83a3b4@syzkaller.appspotmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Tested-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20230406111627.1916759-1-tudor.ambarus@linaro.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1dedde6903 ]
It is possible for i_disksize can exceed i_size, triggering a warning.
generic_perform_write
copied = iov_iter_copy_from_user_atomic(len) // copied < len
ext4_da_write_end
| ext4_update_i_disksize
| new_i_size = pos + copied;
| WRITE_ONCE(EXT4_I(inode)->i_disksize, newsize) // update i_disksize
| generic_write_end
| copied = block_write_end(copied, len) // copied = 0
| if (unlikely(copied < len))
| if (!PageUptodate(page))
| copied = 0;
| if (pos + copied > inode->i_size) // return false
if (unlikely(copied == 0))
goto again;
if (unlikely(iov_iter_fault_in_readable(i, bytes))) {
status = -EFAULT;
break;
}
We get i_disksize greater than i_size here, which could trigger WARNING
check 'i_size_read(inode) < EXT4_I(inode)->i_disksize' while doing dio:
ext4_dio_write_iter
iomap_dio_rw
__iomap_dio_rw // return err, length is not aligned to 512
ext4_handle_inode_extension
WARN_ON_ONCE(i_size_read(inode) < EXT4_I(inode)->i_disksize) // Oops
WARNING: CPU: 2 PID: 2609 at fs/ext4/file.c:319
CPU: 2 PID: 2609 Comm: aa Not tainted 6.3.0-rc2
RIP: 0010:ext4_file_write_iter+0xbc7
Call Trace:
vfs_write+0x3b1
ksys_write+0x77
do_syscall_64+0x39
Fix it by updating 'copied' value before updating i_disksize just like
ext4_write_inline_data_end() does.
A reproducer can be found in the buganizer link below.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217209
Fixes: 64769240bd ("ext4: Add delayed allocation support in data=writeback mode")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230321013721.89818-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d906be3fa5 ]
We should not cache deferred file handles if we dont have
handle lease on a file. And we should immediately close all
deferred handles in case of handle lease break.
Fixes: 9e31678fb4 ("SMB3: fix lease break timeout when multiple deferred close handles for the same file.")
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab9ddc87a9 ]
cifs_del_deferred_close function has a critical section which modifies
the deferred close file list. We must acquire deferred_lock before
calling cifs_del_deferred_close function.
Fixes: ca08d0eac0 ("cifs: Fix memory leak on the deferred close")
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Acked-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 812489ac4d ]
In commit 91993c8c2e ("openrisc: use shadow registers to save regs on
exception") the unhandled exception path was changed to do an early
store of r30 instead of r31. The entry code was not updated and r31 is
not getting stored to pt_regs.
This patch updates the entry handler to store r31 instead of r30. We
also remove some misleading commented out store r30 and r31
instructrions.
I noticed this while working on adding floating point exception
handling, This issue probably would never impact anything since we kill
the process or Oops right away on unhandled exceptions.
Fixes: 91993c8c2e ("openrisc: use shadow registers to save regs on exception")
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
