PD#151924: clear emmc pimux fail on m8b,
because BOOT gpio pin number error.
Change-Id: Ic67dff49d28c99e208929f7b142849ecd44d53cc
Signed-off-by: Nan Li <nan.li@amlogic.com>
PD#150879: if continuous-clock is configed, the audio clock don't
gate off when there is audio stream. Also, this commit could simply
set the same MPLL source to make PDM-in and TDM-out work synchronously.
Change-Id: Iac488b4d4813f758f0bc1ebd8bb5f35f9a8dfff1
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#151361: Oops when doing OTA upgrading
in single_release file->private_data will be dereferenced,
which is assigned a value by single_open. So if signle_open
is not called before single_release, an "unable to handle
kernel NULL pointer..." issue will appear.
But in this case, since single_open and seq_read is not
called, there is no need calling single_release to release
mem allocated by single_open and seq_read. Simpley remove
calling single_release is the best choise
Change-Id: I21882da33cc2509c1b5b42daabbd7c6f3fdc4542
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
PD#148982: add freeze op to distinguish freeze mode vs mem mode
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Change-Id: I3bec4d687a933603a29aeb7a44422aa81e47cea7
PD#150578: enable sysrq
CONFIG_MAGIC_SYSRQ is selected by CONFIG_KGDB_SERIAL_CONSOLE in Kconfig,
so CONFIG_MAGIC_SYSRQ should by enabled to enable syrq after KGDB is
disabled
Change-Id: I09207781dba9369b6f0a505492f8840526474acf
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
PD#151126: emmc: modify the RPMB mark
1. modify the RPMB mark in AMLSD.c file
2. add debug debugging methods
Change-Id: Iae4f87612c8976520c8283188d331e9e94e72784
Signed-off-by: Long Yu <long.yu@amlogic.com>
PD#149771: disable CONFIG_DEVPORT on arm64 systems
CONFIG_DEVPORT should not be used on arm64 systems.
It cannot really be used.
Change-Id: I2ed538e3c9dc7596be55789dbc23480ed92b13f9
Signed-off-by: Ao Xu <ao.xu@amlogic.com>
PD#151167: del interrupts = < 0 68 4> to fix irq: type mismatch issue
test on p212 board
Change-Id: I003175f59f77fd7711297a2472e1986fea8f3609
Signed-off-by: Rongjun Chen <rongjun.chen@amlogic.com>
PD#150981: synchronous lcd driver linux3.14 to linux4.9
1.add bl_level bootargs parameter
2.repair unifykey bl_level error
3.update the mechanism of 50/60hz switch
4.add pwm & enable sequence reverse support
5.add vbyone special control adjust support
Change-Id: I63136af6b96d793691eed23c064e7515e1d50aff
Signed-off-by: Weiming Liu <weiming.liu@amlogic.com>
PD#149178: memleek when single_open/seq_readwithout single_release
single_open/seq_read will apply for one page and two small
slab memory. If we do not release them in single_release,
the system will crash for memory leeking
Change-Id: I2b74a0c6faec415e96164d0c20ba0676836e55eb
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
PD#150914: mm: optimize for cma allocation/free time
1. NOT use __GFP_COLD during cma is under allcating to
avoid page lock long time;
2. Mark __GFP_BDEV for alloc_migrate_target to avoid
migrate allocate cma page again in cma allocate;
3. use SMP to allocate cma;
4. try to free large order of pages for cma.
Change-Id: I2213444a089ce27ee6486c84dea03e0584086cd3
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
PD#150868: create logo_reserved node in dts in Android O
Change-Id: I4057aef2e40504920a9d3b086d31d96aa23bb52f
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
PD#150739: merged code from c502feca7 on the amlogic-3.14-dev
1.codec_mm: fixed tvp first wait long time bug
2.pcrmaster: fix some avsync issue in pcrmaster mode
3.vfm: fix vf provider crash issue
Change-Id: I64202a38a3ed0c50ba665fb477caea26c67ddcb0
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
PD#150865: add p241 dts.
1. system partition size is 0x80000000.
2. max gpu clk is 650M.
3. uart_A status is disable, uart_C is okay.
4. vpu clk level is 200M.
Change-Id: I03cc3119e3d5be8ccedc2f6f3304189fd89ef33b
Signed-off-by: Lianghu Su <lianghu.su@amlogic.com>
PD#150522: compile hci_uart as module
meson64_smarthome_defconfig:
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_QCA=y
1. realtek bt has its own hci_uart driver
so we need compile both hci_uart driver
as module
2. add hciuart_qca support, for we need qualcomm
bt for bluez later
Change-Id: Icffbb66623a5e28803a4f26bb3523f79cae91bc3
Signed-off-by: Weiguang Ruan <Weiguang.ruan@amlogic.com>
