[ Upstream commit 03dba9cea72f977e873e4e60e220fa596959dd8f ]
Depending on the security set the response to L2CAP_LE_CONN_REQ shall be
just L2CAP_CR_LE_ENCRYPTION if only encryption when BT_SECURITY_MEDIUM
is selected since that means security mode 2 which doesn't require
authentication which is something that is covered in the qualification
test L2CAP/LE/CFC/BV-25-C.
Link: https://github.com/bluez/bluez/issues/1270
Fixes: 27e2d4c8d2 ("Bluetooth: Add basic LE L2CAP connect request receiving support")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27eab4c644236a9324084a70fe79e511cbd07393 ]
When running these commands on DUT (and similar at the other end)
ip link set dev eth0 up
ip link add link eth0 name eth0.10 type vlan id 10
ip addr add 10.0.0.1/24 dev eth0.10
ip link set dev eth0.10 up
ping 10.0.0.2
The ping will fail.
The reason why is failing is because, the network interfaces for lan966x
have a flag saying that the HW can insert the vlan tags into the
frames(NETIF_F_HW_VLAN_CTAG_TX). Meaning that the frames that are
transmitted don't have the vlan tag inside the skb data, but they have
it inside the skb. We already get that vlan tag and put it in the IFH
but the problem is that we don't configure the HW to rewrite the frame
when the interface is in host mode.
The fix consists in actually configuring the HW to insert the vlan tag
if it is different than 0.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Fixes: 6d2c186afa ("net: lan966x: Add vlan support.")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://patch.msgid.link/20250528093619.3738998-1-horatiu.vultur@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54d34165b4f786d7fea8412a18fb4a54c1eab623 ]
The "freq" variable is in terms of MHz and "max_val_cycles" is in terms
of Hz. The fact that "max_val_cycles" is a u64 suggests that support
for high frequency is intended but the "freq_khz * 1000" would overflow
the u32 type if we went above 4GHz. Use unsigned long long type for the
mutliplication to prevent that.
Fixes: 31c128b66e ("net/mlx4_en: Choose time-stamping shift value according to HW frequency")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/aDbFHe19juIJKjsb@stanley.mountain
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba99c627aac85bc746fb4a6e2d79edb3ad100326 ]
Identify the cause of the suspend/resume hang: netif_carrier_off()
is called during link state changes and becomes stuck while
executing linkwatch_work().
To resolve this issue, call netif_device_detach() during the Ethernet
suspend process to temporarily detach the network device from the
kernel and prevent the suspend/resume hang.
Fixes: 8c7bd5a454 ("net: ethernet: mtk-star-emac: new driver")
Signed-off-by: Yanqing Wang <ot_yanqing.wang@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Link: https://patch.msgid.link/20250528075351.593068-1-macpaul.lin@mediatek.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f41a94aade120dc60322865f363cee7865f2df01 ]
Previously, the RX_BUFFERS_POSTED stat incorrectly reported the
fill_cnt from RX queue 0 for all queues, resulting in inaccurate
per-queue statistics.
Fix this by correctly indexing priv->rx[idx].fill_cnt for each RX queue.
Fixes: 24aeb56f2d ("gve: Add Gvnic stats AQ command and ethtool show/set-priv-flags.")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20250527130830.1812903-1-alok.a.tiwari@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb7fd7aa35bfcc1e1fda4ecc42ccfcb526cdc780 ]
bus_id is currently derived from the ethernetX alias. If one is missing
for the device, 0 is used. If ethernet0 points to another stmmac device
or if there are 2+ stmmac devices without an ethernet alias, then bus_id
will be 0 for all of those.
This is an issue because the bus_id is used to generate the mdio bus id
(new_bus->id in drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
stmmac_mdio_register) and this needs to be unique.
This allows to avoid needing to define ethernet aliases for devices with
multiple stmmac controllers (such as the Rockchip RK3588) for multiple
stmmac devices to probe properly.
Obviously, the bus_id isn't guaranteed to be stable across reboots if no
alias is set for the device but that is easily fixed by simply adding an
alias if this is desired.
Fixes: 25c83b5c2e ("dt:net:stmmac: Add support to dwmac version 3.610 and 3.710")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250527-stmmac-mdio-bus_id-v2-1-a5ca78454e3c@cherry.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 408c97c4a5e0b634dcd15bf8b8808b382e888164 ]
While enable active config via cscfg_csdev_enable_active_config(),
active config could be deactivated via configfs' sysfs interface.
This could make UAF issue in below scenario:
CPU0 CPU1
(sysfs enable) load module
cscfg_load_config_sets()
activate config. // sysfs
(sys_active_cnt == 1)
...
cscfg_csdev_enable_active_config()
lock(csdev->cscfg_csdev_lock)
// here load config activate by CPU1
unlock(csdev->cscfg_csdev_lock)
deactivate config // sysfs
(sys_activec_cnt == 0)
cscfg_unload_config_sets()
unload module
// access to config_desc which freed
// while unloading module.
cscfg_csdev_enable_config
To address this, use cscfg_config_desc's active_cnt as a reference count
which will be holded when
- activate the config.
- enable the activated config.
and put the module reference when config_active_cnt == 0.
Fixes: f8cce2ff3c ("coresight: syscfg: Add API to activate and enable configurations")
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250514161951.3427590-4-yeoreum.yun@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ebf1982038af12f3588417e4fd0417d2551da28 ]
fpga_mgr_test_img_load_sgt() allocates memory for sgt using
kunit_kzalloc() however it does not check if the allocation failed.
It then passes sgt to sg_alloc_table(), which passes it to
__sg_alloc_table(). This function calls memset() on sgt in an attempt to
zero it out. If the allocation fails then sgt will be NULL and the
memset will trigger a NULL pointer dereference.
Fix this by checking the allocation with KUNIT_ASSERT_NOT_ERR_OR_NULL().
Reviewed-by: Marco Pagani <marco.pagani@linux.dev>
Fixes: ccbc1c3021 ("fpga: add an initial KUnit suite for the FPGA Manager")
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20250422153737.5264-1-qasdev00@gmail.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7351312632e831e51383f48957d47712fae791ef ]
Enable/disable seems to be racy on SMP, consider the following scenario:
CPU0 CPU1
interrupt_cnt_enable_write(true)
{
if (priv->enabled == enable)
return 0;
if (enable) {
priv->enabled = true;
interrupt_cnt_enable_write(false)
{
if (priv->enabled == enable)
return 0;
if (enable) {
priv->enabled = true;
enable_irq(priv->irq);
} else {
disable_irq(priv->irq)
priv->enabled = false;
}
enable_irq(priv->irq);
} else {
disable_irq(priv->irq);
priv->enabled = false;
}
The above would result in priv->enabled == false, but IRQ left enabled.
Protect both write (above race) and read (to propagate the value on SMP)
callbacks with a mutex.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Fixes: a55ebd47f2 ("counter: add IRQ or GPIO based counter")
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20250331163642.2382651-1-alexander.sverdlin@siemens.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9016776f1301627de78a633bda7c898425a56572 ]
This patch allows writing u64 values to the ADMV8818's high and low-pass
filter frequencies. It includes the following changes:
- Rejects negative frequencies in admv8818_write_raw.
- Adds a write_raw_get_fmt function to admv8818's iio_info, returning
IIO_VAL_INT_64 for the high and low-pass filter 3dB frequency channels.
Fixes: f34fe888ad ("iio:filter:admv8818: add support for ADMV8818")
Signed-off-by: Brian Pellegrino <bpellegrino@arka.org>
Signed-off-by: Sam Winchenbach <swinchenbach@arka.org>
Link: https://patch.msgid.link/20250328174831.227202-7-sam.winchenbach@framepointer.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a760d10ded372d113a0410c42be246315bbc2ff ]
commit a5cfc9d658 ("thunderbolt: Add wake on connect/disconnect
on USB4 ports") introduced a sysfs file to control wake up policy
for a given USB4 port that defaulted to disabled.
However when testing commit 4bfeea6ec1c02 ("thunderbolt: Use wake
on connect and disconnect over suspend") I found that it was working
even without making changes to the power/wakeup file (which defaults
to disabled). This is because of a logic error doing a bitwise or
of the wake-on-connect flag with device_may_wakeup() which should
have been a logical AND.
Adjust the logic so that policy is only applied when wakeup is
actually enabled.
Fixes: a5cfc9d658 ("thunderbolt: Add wake on connect/disconnect on USB4 ports")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5af9f1fa576874b24627d4c05e3a84672204c200 ]
When an application sets and enables an alarm on Loongson RTC devices,
the alarm notification fails to propagate to userspace because the
ACPI event handler omits calling rtc_update_irq().
As a result, processes waiting via select() or poll() on RTC device
files fail to receive alarm notifications.
The ACPI interrupt is also triggered multiple times. In loongson_rtc_handler,
we need to clear TOY_MATCH0_REG to resolve this issue.
Fixes: 09471d8f5b39 ("rtc: loongson: clear TOY_MATCH0_REG in loongson_rtc_isr()")
Fixes: 1b733a9ebc ("rtc: Add rtc driver for the Loongson family chips")
Signed-off-by: Liu Dalin <liudalin@kylinsec.com.cn>
Reviewed-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://lore.kernel.org/r/20250509084416.7979-1-liudalin@kylinsec.com.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d14402a38c2d868cacb1facaf9be908ca6558e59 ]
The qmp_usb_iomap() helper function currently returns the raw result of
devm_ioremap() for non-exclusive mappings. Since devm_ioremap() may return
a NULL pointer and the caller only checks error pointers with IS_ERR(),
NULL could bypass the check and lead to an invalid dereference.
Fix the issue by checking if devm_ioremap() returns NULL. When it does,
qmp_usb_iomap() now returns an error pointer via IOMEM_ERR_PTR(-ENOMEM),
ensuring safe and consistent error handling.
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Fixes: a5d6b1ac56 ("phy: qcom-qmp-usb: fix memleak on probe deferral")
CC: Johan Hovold <johan@kernel.org>
CC: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250414125050.2118619-1-chenyuan0y@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8805f32a96d3b97cef07999fa6f52112678f7e65 ]
If the call to pci_host_probe() in cdns_pcie_host_setup() fails, PM
runtime count is decremented in the error path using pm_runtime_put_sync().
But the runtime count is not incremented by this driver, but only by the
callers (cdns_plat_pcie_probe/j721e_pcie_probe). And the callers also
decrement the runtime PM count in their error path. So this leads to the
below warning from the PM core:
"runtime PM usage count underflow!"
So fix it by getting rid of pm_runtime_put_sync() in the error path and
directly return the errno.
Fixes: 49e427e6bd ("Merge branch 'pci/host-probe-refactor'")
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250419133058.162048-1-18255117159@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f2efdbc303fe7baa83843d3290dd6ea5ba3276c ]
The DT bindings for this driver define the interrupts in the order as
they are numbered in the interrupt controller. The old platform_data,
however, listed them in a different order. So, for DT based platforms,
they are mixed up. Assign them specifically for DT, so we can keep the
bindings stable. After the fix, 'rtctest' passes again on the Renesas
Genmai board (RZ-A1 / R7S72100).
Fixes: dab5aec64b ("rtc: sh: add support for rza series")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250227134256.9167-11-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56e84c64fc257a95728ee73165456b025c48d408 ]
Validate the SMB1 query reparse point response per [MS-CIFS] section
2.2.7.2 NT_TRANSACT_IOCTL.
NT_TRANSACT_IOCTL response contains one word long setup data after which is
ByteCount member. So check that SetupCount is 1 before trying to read and
use ByteCount member.
Output setup data contains ReturnedDataLen member which is the output
length of executed IOCTL command by remote system. So check that output was
not truncated before transferring over network.
Change MaxSetupCount of NT_TRANSACT_IOCTL request from 4 to 1 as io_rsp
structure already expects one word long output setup data. This should
prevent server sending incompatible structure (in case it would be extended
in future, which is unlikely).
Change MaxParameterCount of NT_TRANSACT_IOCTL request from 2 to 0 as
NT IOCTL does not have any documented output parameters and this function
does not parse any output parameters at all.
Fixes: ed3e0a149b58 ("smb: client: implement ->query_reparse_point() for SMB1")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80c4de6ab44c14e910117a02f2f8241ffc6ec54a ]
In some scenarios, when mounting NFS, more than one superblock may be
created. The final superblock used is the last one created, but only the
first superblock carries the ro flag passed from user space. If a ro flag
is added to the superblock via remount, it will trigger the issue
described in Link[1].
Link[2] attempted to address this by marking the superblock as ro during
the initial mount. However, this introduced a new problem in scenarios
where multiple mount points share the same superblock:
[root@a ~]# mount /dev/sdb /mnt/sdb
[root@a ~]# echo "/mnt/sdb *(rw,no_root_squash)" > /etc/exports
[root@a ~]# echo "/mnt/sdb/test_dir2 *(ro,no_root_squash)" >> /etc/exports
[root@a ~]# systemctl restart nfs-server
[root@a ~]# mount -t nfs -o rw 127.0.0.1:/mnt/sdb/test_dir1 /mnt/test_mp1
[root@a ~]# mount | grep nfs4
127.0.0.1:/mnt/sdb/test_dir1 on /mnt/test_mp1 type nfs4 (rw,relatime,...
[root@a ~]# mount -t nfs -o ro 127.0.0.1:/mnt/sdb/test_dir2 /mnt/test_mp2
[root@a ~]# mount | grep nfs4
127.0.0.1:/mnt/sdb/test_dir1 on /mnt/test_mp1 type nfs4 (ro,relatime,...
127.0.0.1:/mnt/sdb/test_dir2 on /mnt/test_mp2 type nfs4 (ro,relatime,...
[root@a ~]#
When mounting the second NFS, the shared superblock is marked as ro,
causing the previous NFS mount to become read-only.
To resolve both issues, the ro flag is no longer applied to the superblock
during remount. Instead, the ro flag on the mount is used to control
whether the mount point is read-only.
Fixes: 281cad46b3 ("NFS: Create a submount rpc_op")
Link[1]: https://lore.kernel.org/all/20240604112636.236517-3-lilingfeng@huaweicloud.com/
Link[2]: https://lore.kernel.org/all/20241130035818.1459775-1-lilingfeng3@huawei.com/
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8cd9b785943c57a136536250da80ba1eb6f8eb18 ]
As described in the link, commit 52cb7f8f1778 ("nfs: ignore SB_RDONLY when
mounting nfs") removed the check for the ro flag when determining whether
to share the superblock, which caused issues when mounting different
subdirectories under the same export directory via NFSv3. However, this
change did not affect NFSv4.
For NFSv3:
1) A single superblock is created for the initial mount.
2) When mounted read-only, this superblock carries the SB_RDONLY flag.
3) Before commit 52cb7f8f1778 ("nfs: ignore SB_RDONLY when mounting nfs"):
Subsequent rw mounts would not share the existing ro superblock due to
flag mismatch, creating a new superblock without SB_RDONLY.
After the commit:
The SB_RDONLY flag is ignored during superblock comparison, and this leads
to sharing the existing superblock even for rw mounts.
Ultimately results in write operations being rejected at the VFS layer.
For NFSv4:
1) Multiple superblocks are created and the last one will be kept.
2) The actually used superblock for ro mounts doesn't carry SB_RDONLY flag.
Therefore, commit 52cb7f8f1778 doesn't affect NFSv4 mounts.
Clear SB_RDONLY before getting superblock when NFS_MOUNT_UNSHARED is not
set to fix it.
Fixes: 52cb7f8f1778 ("nfs: ignore SB_RDONLY when mounting nfs")
Closes: https://lore.kernel.org/all/12d7ea53-1202-4e21-a7ef-431c94758ce5@app.fastmail.com/T/
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7a48ea9b919e2fa0e4a1d9938fdb03e9afe276c ]
The syscalls that were consistently observed were set_robust_list and
rseq. This is because perf cannot find their child process.
This change ensures that the return value is always printed.
Before:
0.256 ( 0.001 ms): set_robust_list(head: 0x7f09c77dba20, len: 24) =
0.259 ( 0.001 ms): rseq(rseq: 0x7f09c77dc0e0, rseq_len: 32, sig: 1392848979) =
After:
0.270 ( 0.002 ms): set_robust_list(head: 0x7f0bb14a6a20, len: 24) = 0
0.273 ( 0.002 ms): rseq(rseq: 0x7f0bb14a70e0, rseq_len: 32, sig: 1392848979) = 0
Committer notes:
As discussed in the thread in the Link: tag below, these two don't
return a pid, but for syscalls returning one, we need to print the
result and if we manage to find the children in 'perf trace' data
structures, then print its name as well.
Fixes: 11c8e39f51 ("perf trace: Infrastructure to show COMM strings for syscalls returning PIDs")
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Anubhav Shelat <ashelat@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250403160411.159238-2-ashelat@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 628e124404b3db5e10e17228e680a2999018ab33 ]
The test might fail on the Arm64 platform with the error:
# perf test -vvv "Track with sched_switch"
Missing sched_switch events
#
The issue is caused by incorrect handling of timestamp comparisons. The
comparison result, a signed 64-bit value, was being directly cast to an
int, leading to incorrect sorting for sched events.
The case does not fail everytime, usually I can trigger the failure
after run 20 ~ 30 times:
# while true; do perf test "Track with sched_switch"; done
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : FAILED!
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : FAILED!
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
I used cross compiler to build Perf tool on my host machine and tested on
Debian / Juno board. Generally, I think this issue is not very specific
to GCC versions. As both internal CI and my local env can reproduce the
issue.
My Host Build compiler:
# aarch64-linux-gnu-gcc --version
aarch64-linux-gnu-gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0
Juno Board:
# lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux 12 (bookworm)
Release: 12
Codename: bookworm
Fix this by explicitly returning 0, 1, or -1 based on whether the result
is zero, positive, or negative.
Fixes: d44bc55829 ("perf tests: Add a test for tracking with sched_switch")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250331172759.115604-1-leo.yan@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9995dbfc2235efabdb3759606d522e1a7ec3bdcb ]
Commit f3f11cfe8907 ("remoteproc: k3-r5: Acquire mailbox handle during
probe routine") introduced a check in the "k3_r5_rproc_mbox_callback()"
and "k3_r5_rproc_kick()" callbacks, causing them to exit if the remote
core's state is "RPROC_DETACHED". However, the "__rproc_attach()"
function that is responsible for attaching to a remote core, updates
the state of the remote core to "RPROC_ATTACHED" only after invoking
"rproc_start_subdevices()".
The "rproc_start_subdevices()" function triggers the probe of the Virtio
RPMsg devices associated with the remote core, which require that the
"k3_r5_rproc_kick()" and "k3_r5_rproc_mbox_callback()" callbacks are
functional. Hence, drop the check in the callbacks.
Fixes: f3f11cfe8907 ("remoteproc: k3-r5: Acquire mailbox handle during probe routine")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-2-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e00eac6b5b6d956f38d8880c44bf7fd9954063c3 ]
The Fixes commit did not add support for decoding PEBS-via-PT data_src.
Fix by adding support.
PEBS-via-PT is a feature of some E-core processors, starting with
processors based on Tremont microarchitecture. Because the kernel only
supports Intel PT features that are on all processors, there is no support
for PEBS-via-PT on hybrids.
Currently that leaves processors based on Tremont, Gracemont and Crestmont,
however there are no events on Tremont that produce data_src information,
and for Gracemont and Crestmont there are only:
mem-loads event=0xd0,umask=0x5,ldlat=3
mem-stores event=0xd0,umask=0x6
Affected processors include Alder Lake N (Gracemont), Sierra Forest
(Crestmont) and Grand Ridge (Crestmont).
Example:
# perf record -d -e intel_pt/branch=0/ -e mem-loads/aux-output/pp uname
Before:
# perf.before script --itrace=o -Fdata_src
0 |OP No|LVL N/A|SNP N/A|TLB N/A|LCK No|BLK N/A
0 |OP No|LVL N/A|SNP N/A|TLB N/A|LCK No|BLK N/A
After:
# perf script --itrace=o -Fdata_src
10268100142 |OP LOAD|LVL L1 hit|SNP None|TLB L1 or L2 hit|LCK No|BLK N/A
10450100442 |OP LOAD|LVL L2 hit|SNP None|TLB L2 miss|LCK No|BLK N/A
Fixes: 975846eddf ("perf intel-pt: Add memory information to synthesized PEBS sample")
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250512093932.79854-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13e79076c89f6e96a6cca8f6df38b40d025907b4 ]
dm-flakey corrupts the read bios in the endio function. However, the
corrupt_bio_* functions checked bio_has_data() to see if there was data
to corrupt. Since this was the endio function, there was no data left to
complete, so bio_has_data() was always false. Fix this by saving a copy
of the bio's bi_iter in flakey_map(), and using this to initialize the
iter for corrupting the read bios. This patch also skips cloning the bio
for write bios with no data.
Reported-by: Kent Overstreet <kent.overstreet@linux.dev>
Fixes: a3998799fb ("dm flakey: add corrupt_bio_byte feature")
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40ed054f39bc99eac09871c33198e501f4acdf24 ]
dm-flakey would error all IOs if num_features was 0, but if it was
absent, dm-flakey would never error any IO. Fix this so that no
num_features works the same as num_features set to 0.
Fixes: aa7d7bc99f ("dm flakey: add an "error_reads" option")
Reported-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25be318324563c63cbd9cb53186203a08d2f83a1 ]
Prevent a potential invalid memory access when the requested sensor
is not found.
find_ec_sensor_index() may return a negative value (e.g. -ENOENT),
but its result was used without checking, which could lead to
undefined behavior when passed to get_sensor_info().
Add a proper check to return -EINVAL if sensor_index is negative.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: d0ddfd241e ("hwmon: (asus-ec-sensors) add driver for ASUS EC")
Signed-off-by: Alexei Safin <a.safin@rosa.ru>
Link: https://lore.kernel.org/r/20250424202654.5902-1-a.safin@rosa.ru
[groeck: Return error code returned from find_ec_sensor_index]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d95846350aac72303036a70c4cdc69ae314aa26d ]
If ctx->steps is zero, the loop processing ECC steps is skipped,
and the variable ret remains uninitialized. It is later checked
and returned, which leads to undefined behavior and may cause
unpredictable results in user space or kernel crashes.
This scenario can be triggered in edge cases such as misconfigured
geometry, ECC engine misuse, or if ctx->steps is not validated
after initialization.
Initialize ret to zero before the loop to ensure correct and safe
behavior regardless of the ctx->steps value.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 48e6633a9f ("mtd: nand: mxic-ecc: Add Macronix external ECC engine support")
Signed-off-by: Mikhail Arkhipov <m.arhipov@rosa.ru>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8819e7f03470c5b468720630d9e4e1d5b99159e ]
With request-based dm, the mempools don't need reloading when switching
tables, but the unused table mempools are not freed until the active
table is finally freed. Free them immediately if they are not needed.
Fixes: 29dec90a0f ("dm: fix bio_set allocation")
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
