Changes in 5.10.52
certs: add 'x509_revocation_list' to gitignore
cifs: handle reconnect of tcon when there is no cached dfs referral
KVM: mmio: Fix use-after-free Read in kvm_vm_ioctl_unregister_coalesced_mmio
KVM: x86: Use guest MAXPHYADDR from CPUID.0x8000_0008 iff TDP is enabled
KVM: x86/mmu: Do not apply HPA (memory encryption) mask to GPAs
KVM: nSVM: Check the value written to MSR_VM_HSAVE_PA
KVM: X86: Disable hardware breakpoints unconditionally before kvm_x86->run()
scsi: core: Fix bad pointer dereference when ehandler kthread is invalid
scsi: zfcp: Report port fc_security as unknown early during remote cable pull
tracing: Do not reference char * as a string in histograms
drm/i915/gtt: drop the page table optimisation
drm/i915/gt: Fix -EDEADLK handling regression
cgroup: verify that source is a string
fbmem: Do not delete the mode that is still in use
drm/dp_mst: Do not set proposed vcpi directly
drm/dp_mst: Avoid to mess up payload table by ports in stale topology
drm/dp_mst: Add missing drm parameters to recently added call to drm_dbg_kms()
drm/ingenic: Fix non-OSD mode
drm/ingenic: Switch IPU plane to type OVERLAY
Revert "drm/ast: Remove reference to struct drm_device.pdev"
net: bridge: multicast: fix PIM hello router port marking race
net: bridge: multicast: fix MRD advertisement router port marking race
leds: tlc591xx: fix return value check in tlc591xx_probe()
ASoC: Intel: sof_sdw: add mutual exclusion between PCH DMIC and RT715
dmaengine: fsl-qdma: check dma_set_mask return value
scsi: arcmsr: Fix the wrong CDB payload report to IOP
srcu: Fix broken node geometry after early ssp init
rcu: Reject RCU_LOCKDEP_WARN() false positives
tty: serial: fsl_lpuart: fix the potential risk of division or modulo by zero
serial: fsl_lpuart: disable DMA for console and fix sysrq
misc/libmasm/module: Fix two use after free in ibmasm_init_one
misc: alcor_pci: fix null-ptr-deref when there is no PCI bridge
ASoC: intel/boards: add missing MODULE_DEVICE_TABLE
partitions: msdos: fix one-byte get_unaligned()
iio: gyro: fxa21002c: Balance runtime pm + use pm_runtime_resume_and_get().
iio: magn: bmc150: Balance runtime pm + use pm_runtime_resume_and_get()
ALSA: usx2y: Avoid camelCase
ALSA: usx2y: Don't call free_pages_exact() with NULL address
Revert "ALSA: bebob/oxfw: fix Kconfig entry for Mackie d.2 Pro"
usb: common: usb-conn-gpio: fix NULL pointer dereference of charger
w1: ds2438: fixing bug that would always get page0
scsi: arcmsr: Fix doorbell status being updated late on ARC-1886
scsi: hisi_sas: Propagate errors in interrupt_init_v1_hw()
scsi: lpfc: Fix "Unexpected timeout" error in direct attach topology
scsi: lpfc: Fix crash when lpfc_sli4_hba_setup() fails to initialize the SGLs
scsi: core: Cap scsi_host cmd_per_lun at can_queue
ALSA: ac97: fix PM reference leak in ac97_bus_remove()
tty: serial: 8250: serial_cs: Fix a memory leak in error handling path
scsi: mpt3sas: Fix deadlock while cancelling the running firmware event
scsi: core: Fixup calling convention for scsi_mode_sense()
scsi: scsi_dh_alua: Check for negative result value
fs/jfs: Fix missing error code in lmLogInit()
scsi: megaraid_sas: Fix resource leak in case of probe failure
scsi: megaraid_sas: Early detection of VD deletion through RaidMap update
scsi: megaraid_sas: Handle missing interrupts while re-enabling IRQs
scsi: iscsi: Add iscsi_cls_conn refcount helpers
scsi: iscsi: Fix conn use after free during resets
scsi: iscsi: Fix shost->max_id use
scsi: qedi: Fix null ref during abort handling
scsi: qedi: Fix race during abort timeouts
scsi: qedi: Fix TMF session block/unblock use
scsi: qedi: Fix cleanup session block/unblock use
mfd: da9052/stmpe: Add and modify MODULE_DEVICE_TABLE
mfd: cpcap: Fix cpcap dmamask not set warnings
ASoC: img: Fix PM reference leak in img_i2s_in_probe()
fsi: Add missing MODULE_DEVICE_TABLE
serial: tty: uartlite: fix console setup
s390/sclp_vt220: fix console name to match device
s390: disable SSP when needed
selftests: timers: rtcpie: skip test if default RTC device does not exist
ALSA: sb: Fix potential double-free of CSP mixer elements
powerpc/ps3: Add dma_mask to ps3_dma_region
iommu/arm-smmu: Fix arm_smmu_device refcount leak when arm_smmu_rpm_get fails
iommu/arm-smmu: Fix arm_smmu_device refcount leak in address translation
ASoC: soc-pcm: fix the return value in dpcm_apply_symmetry()
gpio: zynq: Check return value of pm_runtime_get_sync
gpio: zynq: Check return value of irq_get_irq_data
scsi: storvsc: Correctly handle multiple flags in srb_status
ALSA: ppc: fix error return code in snd_pmac_probe()
selftests/powerpc: Fix "no_handler" EBB selftest
gpio: pca953x: Add support for the On Semi pca9655
powerpc/mm/book3s64: Fix possible build error
ASoC: soc-core: Fix the error return code in snd_soc_of_parse_audio_routing()
habanalabs/gaudi: set the correct cpu_id on MME2_QM failure
habanalabs: remove node from list before freeing the node
s390/processor: always inline stap() and __load_psw_mask()
s390/ipl_parm: fix program check new psw handling
s390/mem_detect: fix diag260() program check new psw handling
s390/mem_detect: fix tprot() program check new psw handling
Input: hideep - fix the uninitialized use in hideep_nvm_unlock()
ALSA: bebob: add support for ToneWeal FW66
ALSA: usb-audio: scarlett2: Fix 18i8 Gen 2 PCM Input count
ALSA: usb-audio: scarlett2: Fix data_mutex lock
ALSA: usb-audio: scarlett2: Fix scarlett2_*_ctl_put() return values
usb: gadget: f_hid: fix endianness issue with descriptors
usb: gadget: hid: fix error return code in hid_bind()
powerpc/boot: Fixup device-tree on little endian
ASoC: Intel: kbl_da7219_max98357a: shrink platform_id below 20 characters
backlight: lm3630a: Fix return code of .update_status() callback
ALSA: hda: Add IRQ check for platform_get_irq()
ALSA: usb-audio: scarlett2: Fix 6i6 Gen 2 line out descriptions
ALSA: firewire-motu: fix detection for S/PDIF source on optical interface in v2 protocol
leds: turris-omnia: add missing MODULE_DEVICE_TABLE
staging: rtl8723bs: fix macro value for 2.4Ghz only device
intel_th: Wait until port is in reset before programming it
i2c: core: Disable client irq on reboot/shutdown
phy: intel: Fix for warnings due to EMMC clock 175Mhz change in FIP
lib/decompress_unlz4.c: correctly handle zero-padding around initrds.
kcov: add __no_sanitize_coverage to fix noinstr for all architectures
power: supply: sc27xx: Add missing MODULE_DEVICE_TABLE
power: supply: sc2731_charger: Add missing MODULE_DEVICE_TABLE
pwm: spear: Don't modify HW state in .remove callback
PCI: ftpci100: Rename macro name collision
power: supply: ab8500: Avoid NULL pointers
PCI: hv: Fix a race condition when removing the device
power: supply: max17042: Do not enforce (incorrect) interrupt trigger type
power: reset: gpio-poweroff: add missing MODULE_DEVICE_TABLE
ARM: 9087/1: kprobes: test-thumb: fix for LLVM_IAS=1
PCI/P2PDMA: Avoid pci_get_slot(), which may sleep
NFSv4: Fix delegation return in cases where we have to retry
PCI: pciehp: Ignore Link Down/Up caused by DPC
watchdog: Fix possible use-after-free in wdt_startup()
watchdog: sc520_wdt: Fix possible use-after-free in wdt_turnoff()
watchdog: Fix possible use-after-free by calling del_timer_sync()
watchdog: imx_sc_wdt: fix pretimeout
watchdog: iTCO_wdt: Account for rebooting on second timeout
x86/fpu: Return proper error codes from user access functions
remoteproc: core: Fix cdev remove and rproc del
PCI: tegra: Add missing MODULE_DEVICE_TABLE
orangefs: fix orangefs df output.
ceph: remove bogus checks and WARN_ONs from ceph_set_page_dirty
drm/gma500: Add the missed drm_gem_object_put() in psb_user_framebuffer_create()
NFS: nfs_find_open_context() may only select open files
power: supply: charger-manager: add missing MODULE_DEVICE_TABLE
power: supply: ab8500: add missing MODULE_DEVICE_TABLE
drm/amdkfd: fix sysfs kobj leak
pwm: img: Fix PM reference leak in img_pwm_enable()
pwm: tegra: Don't modify HW state in .remove callback
ACPI: AMBA: Fix resource name in /proc/iomem
ACPI: video: Add quirk for the Dell Vostro 3350
PCI: rockchip: Register IRQ handlers after device and data are ready
virtio-blk: Fix memory leak among suspend/resume procedure
virtio_net: Fix error handling in virtnet_restore()
virtio_console: Assure used length from device is limited
f2fs: atgc: fix to set default age threshold
NFSD: Fix TP_printk() format specifier in nfsd_clid_class
x86/signal: Detect and prevent an alternate signal stack overflow
f2fs: add MODULE_SOFTDEP to ensure crc32 is included in the initramfs
f2fs: compress: fix to disallow temp extension
remoteproc: k3-r5: Fix an error message
PCI/sysfs: Fix dsm_label_utf16s_to_utf8s() buffer overrun
power: supply: rt5033_battery: Fix device tree enumeration
NFSv4: Initialise connection to the server in nfs4_alloc_client()
NFSv4: Fix an Oops in pnfs_mark_request_commit() when doing O_DIRECT
misc: alcor_pci: fix inverted branch condition
um: fix error return code in slip_open()
um: fix error return code in winch_tramp()
ubifs: Fix off-by-one error
ubifs: journal: Fix error return code in ubifs_jnl_write_inode()
watchdog: aspeed: fix hardware timeout calculation
watchdog: jz4740: Fix return value check in jz4740_wdt_probe()
SUNRPC: prevent port reuse on transports which don't request it.
nfs: fix acl memory leak of posix_acl_create()
ubifs: Set/Clear I_LINKABLE under i_lock for whiteout inode
PCI: iproc: Fix multi-MSI base vector number allocation
PCI: iproc: Support multi-MSI only on uniprocessor kernel
f2fs: fix to avoid adding tab before doc section
x86/fpu: Fix copy_xstate_to_kernel() gap handling
x86/fpu: Limit xstate copy size in xstateregs_set()
PCI: intel-gw: Fix INTx enable
pwm: imx1: Don't disable clocks at device remove time
PCI: tegra194: Fix tegra_pcie_ep_raise_msi_irq() ill-defined shift
vdpa/mlx5: Fix umem sizes assignments on VQ create
vdpa/mlx5: Fix possible failure in umem size calculation
virtio_net: move tx vq operation under tx queue lock
nvme-tcp: can't set sk_user_data without write_lock
nfsd: Reduce contention for the nfsd_file nf_rwsem
ALSA: isa: Fix error return code in snd_cmi8330_probe()
vdpa/mlx5: Clear vq ready indication upon device reset
NFSv4/pnfs: Fix the layout barrier update
NFSv4/pnfs: Fix layoutget behaviour after invalidation
NFSv4/pNFS: Don't call _nfs4_pnfs_v3_ds_connect multiple times
hexagon: handle {,SOFT}IRQENTRY_TEXT in linker script
hexagon: use common DISCARDS macro
ARM: dts: gemini-rut1xx: remove duplicate ethernet node
reset: RESET_BRCMSTB_RESCAL should depend on ARCH_BRCMSTB
reset: RESET_INTEL_GW should depend on X86
reset: a10sr: add missing of_match_table reference
ARM: exynos: add missing of_node_put for loop iteration
ARM: dts: exynos: fix PWM LED max brightness on Odroid XU/XU3
ARM: dts: exynos: fix PWM LED max brightness on Odroid HC1
ARM: dts: exynos: fix PWM LED max brightness on Odroid XU4
memory: stm32-fmc2-ebi: add missing of_node_put for loop iteration
memory: atmel-ebi: add missing of_node_put for loop iteration
reset: brcmstb: Add missing MODULE_DEVICE_TABLE
memory: pl353: Fix error return code in pl353_smc_probe()
ARM: dts: sun8i: h3: orangepi-plus: Fix ethernet phy-mode
rtc: fix snprintf() checking in is_rtc_hctosys()
arm64: dts: renesas: v3msk: Fix memory size
ARM: dts: r8a7779, marzen: Fix DU clock names
arm64: dts: ti: j7200-main: Enable USB2 PHY RX sensitivity workaround
arm64: dts: renesas: Add missing opp-suspend properties
arm64: dts: renesas: r8a7796[01]: Fix OPP table entry voltages
ARM: dts: stm32: Connect PHY IRQ line on DH STM32MP1 SoM
ARM: dts: stm32: Rework LAN8710Ai PHY reset on DHCOM SoM
arm64: dts: qcom: trogdor: Add no-hpd to DSI bridge node
firmware: tegra: Fix error return code in tegra210_bpmp_init()
firmware: arm_scmi: Reset Rx buffer to max size during async commands
dt-bindings: i2c: at91: fix example for scl-gpios
ARM: dts: BCM5301X: Fixup SPI binding
reset: bail if try_module_get() fails
arm64: dts: renesas: r8a779a0: Drop power-domains property from GIC node
arm64: dts: ti: k3-j721e-main: Fix external refclk input to SERDES
memory: fsl_ifc: fix leak of IO mapping on probe failure
memory: fsl_ifc: fix leak of private memory on probe failure
arm64: dts: allwinner: a64-sopine-baseboard: change RGMII mode to TXID
ARM: dts: dra7: Fix duplicate USB4 target module node
ARM: dts: am335x: align ti,pindir-d0-out-d1-in property with dt-shema
ARM: dts: am437x: align ti,pindir-d0-out-d1-in property with dt-shema
thermal/drivers/sprd: Add missing MODULE_DEVICE_TABLE
ARM: dts: imx6q-dhcom: Fix ethernet reset time properties
ARM: dts: imx6q-dhcom: Fix ethernet plugin detection problems
ARM: dts: imx6q-dhcom: Add gpios pinctrl for i2c bus recovery
thermal/drivers/rcar_gen3_thermal: Fix coefficient calculations
firmware: turris-mox-rwtm: fix reply status decoding function
firmware: turris-mox-rwtm: report failures better
firmware: turris-mox-rwtm: fail probing when firmware does not support hwrng
firmware: turris-mox-rwtm: show message about HWRNG registration
arm64: dts: rockchip: Re-add regulator-boot-on, regulator-always-on for vdd_gpu on rk3399-roc-pc
arm64: dts: rockchip: Re-add regulator-always-on for vcc_sdio for rk3399-roc-pc
scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe()
sched/uclamp: Ignore max aggregation if rq is idle
jump_label: Fix jump_label_text_reserved() vs __init
static_call: Fix static_call_text_reserved() vs __init
mips: always link byteswap helpers into decompressor
mips: disable branch profiling in boot/decompress.o
MIPS: vdso: Invalid GIC access through VDSO
scsi: scsi_dh_alua: Fix signedness bug in alua_rtpg()
seq_file: disallow extremely large seq buffer allocations
Linux 5.10.52
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Id1e8fbe38b5665cbd078775fc81784f022978575
If building on Android infrastructure, the BUILD_NUMBER variable will be
set to indicate a unique build ID for this build. Add it to the kernel
version, which is used by UTS_RELEASE and various other build steps.
Bug: 137521202
Bug: 159842160
Bug: 194209519
Signed-off-by: Alistair Delva <adelva@google.com>
Change-Id: I44ab12ad16439c7e518b878af03153822447a4b2
This reverts commit fc31d47a63.
This change was broken because UTS_RELEASE is used at runtime to find
files which are installed using KERNELRELEASE, so they need to match.
Bug: 137521202
Bug: 159842160
Bug: 194209519
Signed-off-by: Alistair Delva <adelva@google.com>
Change-Id: I668128a394919a59dd142a612ca2edbad51391d3
[ Upstream commit 47ce8527fb ]
Accessing raw timers (currently only CLOCK_MONOTONIC_RAW) through VDSO
doesn't return the correct time when using the GIC as clock source.
The address of the GIC mapped page is in this case not calculated
correctly. The GIC mapped page is calculated from the VDSO data by
subtracting PAGE_SIZE:
void *get_gic(const struct vdso_data *data) {
return (void __iomem *)data - PAGE_SIZE;
}
However, the data pointer is not page aligned for raw clock sources.
This is because the VDSO data for raw clock sources (CS_RAW = 1) is
stored after the VDSO data for coarse clock sources (CS_HRES_COARSE = 0).
Therefore, only the VDSO data for CS_HRES_COARSE is page aligned:
+--------------------+
| |
| vd[CS_RAW] | ---+
| vd[CS_HRES_COARSE] | |
+--------------------+ | -PAGE_SIZE
| | |
| GIC mapped page | <--+
| |
+--------------------+
When __arch_get_hw_counter() is called with &vd[CS_RAW], get_gic returns
the wrong address (somewhere inside the GIC mapped page). The GIC counter
values are not returned which results in an invalid time.
Fixes: a7f4df4e21 ("MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime()")
Signed-off-by: Martin Fäcknitz <faecknitz@hotsplots.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97e488073c ]
Use DISABLE_BRANCH_PROFILING for arch/mips/boot/compressed/decompress.o
to prevent linkage errors.
mips64-linux-ld: arch/mips/boot/compressed/decompress.o: in function `LZ4_decompress_fast_extDict':
decompress.c:(.text+0x8c): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0xf4): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0x200): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0x230): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0x320): undefined reference to `ftrace_likely_update'
mips64-linux-ld: arch/mips/boot/compressed/decompress.o:decompress.c:(.text+0x3f4): more undefined references to `ftrace_likely_update' follow
Fixes: e76e1fdfa8 ("lib: add support for LZ4-compressed kernel")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: Kyungsik Lee <kyungsik.lee@lge.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cddc40f561 ]
My series to clean up the unaligned access implementation
across architectures caused some mips randconfig builds to
fail with:
mips64-linux-ld: arch/mips/boot/compressed/decompress.o: in function `decompress_kernel':
decompress.c:(.text.decompress_kernel+0x54): undefined reference to `__bswapsi2'
It turns out that this problem has already been fixed for the XZ
decompressor but now it also shows up in (at least) LZO and LZ4. From my
analysis I concluded that the compiler could always have emitted those
calls, but the different implementation allowed it to make otherwise
better decisions about not inlining the byteswap, which results in the
link error when the out-of-line code is missing.
While it could be addressed by adding it to the two decompressor
implementations that are known to be affected, but as this only adds
112 bytes to the kernel, the safer choice is to always add them.
Fixes: c50ec67875 ("MIPS: zboot: Fix the build with XZ compression on older GCC versions")
Fixes: 0652035a57 ("asm-generic: unaligned: remove byteshift helpers")
Link: https://lore.kernel.org/linux-mm/202106301304.gz2wVY9w-lkp@intel.com/
Link: https://lore.kernel.org/linux-mm/202106260659.TyMe8mjr-lkp@intel.com/
Link: https://lore.kernel.org/linux-mm/202106172016.onWT6Tza-lkp@intel.com/
Link: https://lore.kernel.org/linux-mm/202105231743.JJcALnhS-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e667624c2 ]
It turns out that jump_label_text_reserved() was reporting __init text
as being reserved past the time when the __init text was freed and
re-used.
For a long time, this resulted in, at worst, not being able to kprobe
text that happened to land at the re-used address. However a recent
commit e7bf1ba97a ("jump_label, x86: Emit short JMP") made it a
fatal mistake because it now needs to read the instruction in order to
determine the conflict -- an instruction that's no longer there.
Fixes: 4c3ef6d793 ("jump label: Add jump_label_text_reserved() to reserve jump points")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20210628113045.045141693@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e1493f463 ]
When a task wakes up on an idle rq, uclamp_rq_util_with() would max
aggregate with rq value. But since there is no task enqueued yet, the
values are stale based on the last task that was running. When the new
task actually wakes up and enqueued, then the rq uclamp values should
reflect that of the newly woken up task effective uclamp values.
This is a problem particularly for uclamp_max because it default to
1024. If a task p with uclamp_max = 512 wakes up, then max aggregation
would ignore the capping that should apply when this task is enqueued,
which is wrong.
Fix that by ignoring max aggregation if the rq is idle since in that
case the effective uclamp value of the rq will be the ones of the task
that will wake up.
Fixes: 9d20ad7dfc ("sched/uclamp: Add uclamp_util_with()")
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
[qias: Changelog]
Reviewed-by: Qais Yousef <qais.yousef@arm.com>
Link: https://lore.kernel.org/r/20210630141204.8197-1-xuewen.yan94@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb607cd495 ]
Re-add the regulator-always-on property for vcc_sdio which supplies sdmmc,
since it gets disabled during reboot now and the bootrom expects it to be
enabled when booting from SD card. This makes rebooting impossible in that
case and requires a hard reset to boot again.
Fixes: 04a0077fdb ("arm64: dts: rockchip: Remove always-on properties from regulator nodes on rk3399-roc-pc.")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20210619121306.7740-1-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06b2818678 ]
This might be a limitation of either the current panfrost driver
devfreq implementation or how the gpu is implemented in RK3399 SoC.
The gpu regulator must never get disabled or the registers get
(randomly?) inaccessable by the driver. (see all other RK3399 boards)
Fixes: ec7d731d81 ("arm64: dts: rockchip: Add node for gpu on rk3399-roc-pc")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20210619121446.7802-1-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fae2016099 ]
Currently it is hard to determinate if on Armada 3720 device is HWRNG
by running kernel accessible or not. So print information message into
dmesg when HWRNG is available and registration was successful.
Fixes: 389711b374 ("firmware: Add Turris Mox rWTM firmware driver")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2eab59cf0d ]
When Marvell's rWTM firmware, which does not support the GET_RANDOM
command, is used, kernel prints an error message
hwrng: no data available
every 10 seconds.
Fail probing of this driver if the rWTM firmware does not support the
GET_RANDOM command.
Fixes: 389711b374 ("firmware: Add Turris Mox rWTM firmware driver")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72f9988894 ]
Report a notice level message if a command is not supported by the rWTM
firmware.
This should not be an error, merely a notice, because the firmware can
be used on boards that do not have manufacturing information burned.
Fixes: 389711b374 ("firmware: Add Turris Mox rWTM firmware driver")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e34e60253d ]
The status decoding function mox_get_status() currently contains an
incorrect check: if the error status is not MBOX_STS_SUCCESS, it always
returns -EIO, so the comparison to MBOX_STS_FAIL is never executed and
we don't get the actual error code sent by the firmware.
Fix this.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 389711b374 ("firmware: Add Turris Mox rWTM firmware driver")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b11fec734 ]
ti,pindir-d0-out-d1-in property is expected to be of type boolean.
Therefore, fix the property accordingly.
Fixes: b0b0395154 ("ARM: dts: am43x-epos-evm: set data pin directions for spi0 and spi1")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 414bfe1d26 ]
ti,pindir-d0-out-d1-in property is expected to be of type boolean.
Therefore, fix the property accordingly.
Fixes: 444d66fafa ("ARM: dts: add spi wifi support to cm-t335")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78b4b16528 ]
With [1] USB4 target-module node got defined in dra74x.dtsi file.
However, the earlier definition in [2] was not removed, and this
duplication of the target module is causing boot failure on dra74
variant boards - dra7-evm, dra76-evm.
USB4 is only present in DRA74x variants, so keeping the entry in
dra74x.dtsi and removing it from the top level interconnect hierarchy
dra7-l4.dtsi file. This change makes the USB4 target module no longer
visible to AM5718, DRA71x and DRA72x so removing references to it in
their respective dts files.
[1]: commit c7b72abca6 ("ARM: OMAP2+: Drop legacy platform data for
dra7 dwc3")
[2]: commit 549fce068a ("ARM: dts: dra7: Add l4 interconnect
hierarchy and ti-sysc data")
Fixes: c7b72abca6 ("ARM: OMAP2+: Drop legacy platform data for dra7 dwc3")
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd5431b2f9 ]
Although the schematics of Pine A64-LTS and SoPine Baseboard shows both
the RX and TX internal delay are enabled, they're using the same broken
RTL8211E chip batch with Pine A64+, so they should use TXID instead, not
ID.
In addition, by checking the real components soldered on both a SoPine
Baseboard and a Pine A64-LTS, RX delay is not enabled (GR69 soldered and
GR70 NC) despite the schematics says it's enabled. It's a common
situation for Pine64 boards that the NC information on schematics is not
the same with the board.
So the RGMII delay mode should be TXID on these boards.
Fixes: c2b111e59a ("arm64: dts: allwinner: A64 Sopine: phy-mode rgmii-id")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210609083843.463750-1-icenowy@aosc.io
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c6d0b55b4 ]
Rename the external refclk inputs to the SERDES from
dummy_cmn_refclk/dummy_cmn_refclk1 to cmn_refclk/cmn_refclk1
respectively. Also move the external refclk DT nodes outside the
cbass_main DT node. Since in j721e common processor board, only the
cmn_refclk1 is connected to 100MHz clock, fix the clock frequency.
Fixes: afd094ebe6 ("arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210603143427.28735-2-kishon@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1771a33b34 ]
"make dtbs_check":
arm64/boot/dts/renesas/r8a779a0-falcon.dt.yaml: interrupt-controller@f1000000: 'power-domains' does not match any of the regexes: '^(msi-controller|gic-its|interrupt-controller)@[0-9a-f]+$', '^gic-its@', '^interrupt-controller@[0-9a-f]+$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
Remove the "power-domains" property, as the GIC on R-Car V3U is
always-on, and not part of a clock domain.
Fixes: 834c310f54 ("arm64: dts: renesas: Add Renesas R8A779A0 SoC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/a9ae5cbc7c586bf2c6b18ddc665ad7051bd1d206.1622560236.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5aede3e6d ]
1. Reorder interrupts
2. Fix typo: s/spi_lr_overhead/spi_lr_overread/
3. Rename node: s/spi-nor@0/flash@0/
This fixes:
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: spi@18029200: interrupt-names: 'oneOf' conditional failed, one must be fixed:
['spi_lr_fullness_reached', 'spi_lr_session_aborted', 'spi_lr_impatient', 'spi_lr_session_done', 'spi_lr_overhead', 'mspi_done', 'mspi_halted'] is too long
Additional items are not allowed ('spi_lr_session_aborted', 'spi_lr_impatient', 'spi_lr_session_done', 'spi_lr_overhead', 'mspi_done', 'mspi_halted' were unexpected)
'mspi_done' was expected
'spi_l1_intr' was expected
'mspi_halted' was expected
'spi_lr_fullness_reached' was expected
'spi_lr_session_aborted' was expected
'spi_lr_impatient' was expected
'spi_lr_session_done' was expected
'spi_lr_overread' was expected
From schema: Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: spi-nor@0: $nodename:0: 'spi-nor@0' does not match '^flash(@.*)?$'
From schema: Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92e669017f ]
The SCL gpio pin used by I2C bus for recovery needs to be configured as
open drain, so fix the binding example accordingly.
In relation with fix c5a2838025 ("ARM: dts: at91: Configure I2C SCL
gpio as open drain").
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Fixes: 19e5cef058 ("dt-bindings: i2c: at91: document optional bus recovery properties")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0cb7af474e ]
During an async commands execution the Rx buffer length is at first set
to max_msg_sz when the synchronous part of the command is first sent.
However once the synchronous part completes the transport layer waits
for the delayed response which will be processed using the same xfer
descriptor initially allocated. Since synchronous response received at
the end of the xfer will shrink the Rx buffer length to the effective
payload response length, it needs to be reset again.
Raise the Rx buffer length again to max_msg_sz before fetching the
delayed response to ensure full response is read correctly from the
shared memory.
Link: https://lore.kernel.org/r/20210601102421.26581-2-cristian.marussi@arm.com
Fixes: 58ecdf03db ("firmware: arm_scmi: Add support for asynchronous commands and delayed response")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
[sudeep.holla: moved reset to scmi_handle_response as it could race with
do_xfer_with_response]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7fea67710e ]
When call irq_get_irq_data() to get the IRQ's irq_data failed, an
appropriate error code -ENOENT should be returned. However, we directly
return 'err', which records the IRQ number instead of the error code.
Fixes: 139251fc22 ("firmware: tegra: add bpmp driver for Tegra210")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1cebcf9932 ]
The Microchip LAN8710Ai PHY requires XTAL1/CLKIN external clock to be
enabled when the nRST is toggled according to datasheet Microchip
LAN8710A/LAN8710Ai DS00002164B page 35 section 3.8.5.1 Hardware Reset:
"
A Hardware reset is asserted by driving the nRST input pin low. When
driven, nRST should be held low for the minimum time detailed in
Section 5.5.3, "Power-On nRST & Configuration Strap Timing," on page
59 to ensure a proper transceiver reset. During a Hardware reset, an
external clock must be supplied to the XTAL1/CLKIN signal.
"
This is accidentally fulfilled in the current setup, where ETHCK_K is used
to supply both PHY XTAL1/CLKIN and is also fed back through eth_clk_fb to
supply ETHRX clock of the DWMAC. Hence, the DWMAC enables ETHRX clock,
that has ETHCK_K as parent, so ETHCK_K clock are also enabled, and then
the PHY reset toggles.
However, this is not always the case, e.g. in case the PHY XTAL1/CLKIN
clock are supplied by some other clock source than ETHCK_K or in case
ETHRX clock are not supplied by ETHCK_K. In the later case, ETHCK_K would
be kept disabled, while ETHRX clock would be enabled, so the PHY would
not be receiving XTAL1/CLKIN clock and the reset would fail.
Improve the DT by adding the PHY clock phandle into the PHY node, which
then also requires moving the PHY reset GPIO specifier in the same place
and that then also requires correct PHY reset GPIO timing, so add that
too.
A brief note regarding the timing, the datasheet says the reset should
stay asserted for at least 100uS and software should wait at least 200nS
after deassertion. Set both delays to 500uS which should be plenty.
Fixes: 34e0c7847d ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54b909436e ]
The scnprintf() function silently truncates the printf() and returns
the number bytes that it was able to copy (not counting the NUL
terminator). Thus, the highest value it can return here is
"NAME_SIZE - 1" and the overflow check is dead code. Fix this by
using the snprintf() function which returns the number of bytes that
would have been copied if there was enough space and changing the
condition from "> NAME_SIZE" to ">= NAME_SIZE".
Fixes: 92589c986b ("rtc-proc: permit the /proc/driver/rtc device to use other devices")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/YJov/pcGmhLi2pEl@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>
