[ Upstream commit 3fd7c36973a250e17a4ee305a31545a9426021f4 ]
If a perf trace event selector specifies a maximum number of events to output
(i.e., "/nr=N/" syntax), the event printing handler, trace__event_handler,
disables the event selector after the maximum number events are
printed.
Furthermore, trace__event_handler checked if the event selector was
disabled before doing any work. This avoided exceeding the maximum
number of events to print if more events were in the buffer before the
selector was disabled.
However, the event selector can be disabled for reasons other than
exceeding the maximum number of events. In particular, when the traced
subprocess exits, the main loop disables all event selectors. This meant
the last events of a traced subprocess might be lost to the printing
handler's short-circuiting logic.
This nondeterministic problem could be seen by running the following many times:
$ perf trace -e syscalls:sys_enter_exit_group true
trace__event_handler should simply check for exceeding the maximum number of
events to print rather than the state of the event selector.
Fixes: a9c5e6c1e9 ("perf trace: Introduce per-event maximum number of events property")
Signed-off-by: Benjamin Peterson <benjamin@engflow.com>
Tested-by: Howard Chu <howardchu95@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241107232128.108981-1-benjamin@engflow.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63a24cf8cc330e5a68ebd2e20ae200096974c475 ]
When CONFIG_FEC is set (due to COMPILE_TEST) along with
CONFIG_M54xx, coldfire/device.c has compile errors due to
missing MCFEC_* and MCF_IRQ_FEC_* symbols.
Make the whole FEC blocks dependent on having the HW macros
defined, rather than on CONFIG_FEC itself.
This fix is very similar to commit e6e1e7b19f ("m68k: coldfire/device.c: only build for MCF_EDMA when h/w macros are defined")
Fixes: b7ce7f0d0e ("m68knommu: merge common ColdFire FEC platform setup code")
To: Greg Ungerer <gerg@linux-m68k.org>
To: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Antonio Quartulli <antonio@mandelbit.com>
Signed-off-by: Greg Ungerer <gerg@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f212140962c93cd5da43283a18e31681540fc23d ]
Fix a typo in the CONFIG_M5441x preprocessor condition, where the GPIO
register offset was incorrectly set to 8 instead of 0. This prevented
proper GPIO configuration for m5441x targets.
Fixes: bea8bcb12d ("m68knommu: Add support for the Coldfire m5441x.")
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@yoseli.org>
Signed-off-by: Greg Ungerer <gerg@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5fb8e56542a3cf469fdf25d77f50e21cbff3ae7e ]
trace__fprintf_tp_fields may not print any tracepoint arguments. E.g., if the
argument values are all zero. Previously, this would result in a totally
uninitialized buffer being passed to fprintf, which could lead to garbage on the
console. Fix the problem by passing the number of initialized bytes fprintf.
Fixes: f11b2803bb ("perf trace: Allow choosing how to augment the tracepoint arguments")
Signed-off-by: Benjamin Peterson <benjamin@engflow.com>
Tested-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20241103204816.7834-1-benjamin@engflow.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26e6f59d0bbaac76fa3413462d780bd2b5f9f653 ]
Jinsu Lee reported a performance regression issue, after commit
5c8764f8679e ("f2fs: fix to force buffered IO on inline_data
inode"), we forced direct write to use buffered IO on inline_data
inode, it will cause performace regression due to memory copy
and data flush.
It's fine to not force direct write to use buffered IO, as it
can convert inline inode before committing direct write IO.
Fixes: 5c8764f8679e ("f2fs: fix to force buffered IO on inline_data inode")
Reported-by: Jinsu Lee <jinsu1.lee@samsung.com>
Closes: https://lore.kernel.org/linux-f2fs-devel/af03dd2c-e361-4f80-b2fd-39440766cf6e@kernel.org
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43563069e1c1df417d2eed6eca8a22fc6b04691d ]
In the __f2fs_init_atgc_curseg->get_atssr_segment calling,
curseg->segno is NULL_SEGNO, indicating that there is no summary
block that needs to be written.
Fixes: 093749e296 ("f2fs: support age threshold based garbage collection")
Signed-off-by: Yongpeng Yang <yangyongpeng1@oppo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8442d94b8a ]
allocate_segment_by_default has just two callers, which use very
different code pathes inside it based on the force paramter. Just
open code the logic in the two callers using a new helper to decided
if a new segment should be allocated.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: 43563069e1c1 ("f2fs: check curseg->inited before write_sum_page in change_curseg")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c8a8ec0a0 ]
There is only single instance of these ops, so remove the indirection
and call allocate_segment_by_default directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: 43563069e1c1 ("f2fs: check curseg->inited before write_sum_page in change_curseg")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3af1f13476ec23fd99c98d060a89be28c1e8871 ]
This f2fs_bug_on was introduced by commit 2c1905042c ("f2fs: check
segment type in __f2fs_replace_block") when there were only 6 curseg types.
After commit d0b9e42ab6 ("f2fs: introduce inmem curseg") was introduced,
the condition should be changed to checking curseg->seg_type.
Fixes: d0b9e42ab6 ("f2fs: introduce inmem curseg")
Signed-off-by: LongPing Wei <weilongping@oppo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2226dbc4a4919d9c8bd9293299b532090bdf020 ]
Code in and related to PCI_RefinedAccessConfig() has three types of return
type confusion:
- PCI_RefinedAccessConfig() tests pci_bus_read_config_dword() return value
against -1.
- PCI_RefinedAccessConfig() returns both -1 and PCIBIOS_* return codes.
- Callers of PCI_RefinedAccessConfig() only test for -1.
Make PCI_RefinedAccessConfig() return PCIBIOS_* codes consistently and
adapt callers accordingly.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/r/20241022091140.3504-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87d5403378cccc557af9e02a8a2c8587ad8b7e9a ]
Use PCI_POSSIBLE_ERROR() to check the response we get when we read data
from hardware. This unifies PCI error response checking and makes error
checks consistent and easier to find.
Link: https://lore.kernel.org/r/20240806065050.28725-1-412574090@163.com
Signed-off-by: weiyufeng <weiyufeng@kylinos.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Stable-dep-of: e2226dbc4a49 ("PCI: cpqphp: Fix PCIBIOS_* return value confusion")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 314909f13cc12d47c468602c37dace512d225eeb ]
An issue can be observed when probe C++ demangled symbol with steps:
# nm test_cpp_mangle | grep print_data
0000000000000c94 t _GLOBAL__sub_I__Z10print_datai
0000000000000afc T _Z10print_datai
0000000000000b38 T _Z10print_dataR5Point
# perf probe -x /home/niayan01/test_cpp_mangle -F --demangle
...
print_data(Point&)
print_data(int)
...
# perf --debug verbose=3 probe -x test_cpp_mangle --add "test=print_data(int)"
probe-definition(0): test=print_data(int)
symbol:print_data(int) file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Open Debuginfo file: /home/niayan01/test_cpp_mangle
Try to find probe point from debuginfo.
Symbol print_data(int) address found : afc
Matched function: print_data [2ccf]
Probe point found: print_data+0
Found 1 probe_trace_events.
Opening /sys/kernel/tracing//uprobe_events write=1
Opening /sys/kernel/tracing//README write=0
Writing event: p:probe_test_cpp_mangle/test /home/niayan01/test_cpp_mangle:0xb38
...
When tried to probe symbol "print_data(int)", the log shows:
Symbol print_data(int) address found : afc
The found address is 0xafc - which is right with verifying the output
result from nm. Afterwards when write event, the command uses offset
0xb38 in the last log, which is a wrong address.
The dwarf_diename() gets a common function name, in above case, it
returns string "print_data". As a result, the tool parses the offset
based on the common name. This leads to probe at the wrong symbol
"print_data(Point&)".
To fix the issue, use the die_get_linkage_name() function to retrieve
the distinct linkage name - this is the mangled name for the C++ case.
Based on this unique name, the tool can get a correct offset for
probing. Based on DWARF doc, it is possible the linkage name is missed
in the DIE, it rolls back to use dwarf_diename().
After:
# perf --debug verbose=3 probe -x test_cpp_mangle --add "test=print_data(int)"
probe-definition(0): test=print_data(int)
symbol:print_data(int) file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Open Debuginfo file: /home/niayan01/test_cpp_mangle
Try to find probe point from debuginfo.
Symbol print_data(int) address found : afc
Matched function: print_data [2d06]
Probe point found: print_data+0
Found 1 probe_trace_events.
Opening /sys/kernel/tracing//uprobe_events write=1
Opening /sys/kernel/tracing//README write=0
Writing event: p:probe_test_cpp_mangle/test /home/niayan01/test_cpp_mangle:0xafc
Added new event:
probe_test_cpp_mangle:test (on print_data(int) in /home/niayan01/test_cpp_mangle)
You can now use it in all perf tools, such as:
perf record -e probe_test_cpp_mangle:test -aR sleep 1
# perf --debug verbose=3 probe -x test_cpp_mangle --add "test2=print_data(Point&)"
probe-definition(0): test2=print_data(Point&)
symbol:print_data(Point&) file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Open Debuginfo file: /home/niayan01/test_cpp_mangle
Try to find probe point from debuginfo.
Symbol print_data(Point&) address found : b38
Matched function: print_data [2ccf]
Probe point found: print_data+0
Found 1 probe_trace_events.
Opening /sys/kernel/tracing//uprobe_events write=1
Parsing probe_events: p:probe_test_cpp_mangle/test /home/niayan01/test_cpp_mangle:0x0000000000000afc
Group:probe_test_cpp_mangle Event:test probe:p
Opening /sys/kernel/tracing//README write=0
Writing event: p:probe_test_cpp_mangle/test2 /home/niayan01/test_cpp_mangle:0xb38
Added new event:
probe_test_cpp_mangle:test2 (on print_data(Point&) in /home/niayan01/test_cpp_mangle)
You can now use it in all perf tools, such as:
perf record -e probe_test_cpp_mangle:test2 -aR sleep 1
Fixes: fb1587d869 ("perf probe: List probes with line number and file name")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20241012141432.877894-1-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1acd73edbbfef2c3c5b43cba4006a7797eca7050 ]
It will trigger system panic w/ testcase in [1]:
------------[ cut here ]------------
kernel BUG at fs/f2fs/segment.c:2752!
RIP: 0010:new_curseg+0xc81/0x2110
Call Trace:
f2fs_allocate_data_block+0x1c91/0x4540
do_write_page+0x163/0xdf0
f2fs_outplace_write_data+0x1aa/0x340
f2fs_do_write_data_page+0x797/0x2280
f2fs_write_single_data_page+0x16cd/0x2190
f2fs_write_cache_pages+0x994/0x1c80
f2fs_write_data_pages+0x9cc/0xea0
do_writepages+0x194/0x7a0
filemap_fdatawrite_wbc+0x12b/0x1a0
__filemap_fdatawrite_range+0xbb/0xf0
file_write_and_wait_range+0xa1/0x110
f2fs_do_sync_file+0x26f/0x1c50
f2fs_sync_file+0x12b/0x1d0
vfs_fsync_range+0xfa/0x230
do_fsync+0x3d/0x80
__x64_sys_fsync+0x37/0x50
x64_sys_call+0x1e88/0x20d0
do_syscall_64+0x4b/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The root cause is if checkpoint_disabling and lfs_mode are both on,
it will trigger OPU for all overwritten data, it may cost more free
segment than expected, so f2fs must account those data correctly to
calculate cosumed free segments later, and return ENOSPC earlier to
avoid run out of free segment during block allocation.
[1] https://lore.kernel.org/fstests/20241015025106.3203676-1-chao@kernel.org/
Fixes: 4354994f09 ("f2fs: checkpoint disabling")
Cc: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26413ce18e85de3dda2cd3d72c3c3e8ab8f4f996 ]
After release a file and subsequently reserve it, the FSCK flag is set
when the file is deleted, as shown in the following backtrace:
F2FS-fs (dm-48): Inconsistent i_blocks, ino:401231, iblocks:1448, sectors:1472
fs_rec_info_write_type+0x58/0x274
f2fs_rec_info_write+0x1c/0x2c
set_sbi_flag+0x74/0x98
dec_valid_block_count+0x150/0x190
f2fs_truncate_data_blocks_range+0x2d4/0x3cc
f2fs_do_truncate_blocks+0x2fc/0x5f0
f2fs_truncate_blocks+0x68/0x100
f2fs_truncate+0x80/0x128
f2fs_evict_inode+0x1a4/0x794
evict+0xd4/0x280
iput+0x238/0x284
do_unlinkat+0x1ac/0x298
__arm64_sys_unlinkat+0x48/0x68
invoke_syscall+0x58/0x11c
For clusters of the following type, i_blocks are decremented by 1 and
i_compr_blocks are incremented by 7 in release_compress_blocks, while
updates to i_blocks and i_compr_blocks are skipped in reserve_compress_blocks.
raw node:
D D D D D D D D
after compress:
C D D D D D D D
after reserve:
C D D D D D D D
Let's update i_blocks and i_compr_blocks properly in reserve_compress_blocks.
Fixes: eb8fbaa53374 ("f2fs: compress: fix to check unreleased compressed cluster")
Signed-off-by: Qi Han <hanqi@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e880a70f8046df0dd9089fa60dcb866a2cc69194 ]
When create_perf_stat_counter() failed, it doesn't close workload.cork_fd
open in evlist__prepare_workload(). This could make too many open file
error while __run_perf_stat() repeats.
Introduce evlist__cancel_workload to close workload.cork_fd and
wait workload.child_pid until exit to clear child process
when create_perf_stat_counter() is failed.
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: nd@arm.com
Cc: howardchu95@gmail.com
Link: https://lore.kernel.org/r/20240925132022.2650180-2-yeoreum.yun@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Stable-dep-of: 7f6ccb70e465 ("perf stat: Fix affinity memory leaks on error path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2985b1844f3f3447f2d938eff1ef6762592065a5 ]
In reset_method_store(), a string is allocated via kstrndup() and assigned
to the local "options". options is then used in with strsep() to find
spaces:
while ((name = strsep(&options, " ")) != NULL) {
If there are no remaining spaces, then options is set to NULL by strsep(),
so the subsequent kfree(options) doesn't free the memory allocated via
kstrndup().
Fix by using a separate tmp_options to iterate with strsep() so options is
preserved.
Link: https://lore.kernel.org/r/20241001231147.3583649-1-tkjos@google.com
Fixes: d88f521da3 ("PCI: Allow userspace to query and set device reset mechanism")
Signed-off-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5afd032961e8465808c4bc385c06e7676fbe1951 ]
cs_etm__flush(), like cs_etm__sample() is an operation that generates a
sample and then swaps the current with the previous packet. Calling
flush after processing the queues results in two swaps which corrupts
the next sample. Therefore it wasn't appropriate to call flush here so
remove it.
Flushing is still done on a discontinuity to explicitly clear the last
branch buffer, but when the packet_queue fills up before reaching a
timestamp, that's not a discontinuity and the call to
cs_etm__process_traceid_queue() already generated samples and drained
the buffers correctly.
This is visible by looking for a branch that has the same target as the
previous branch and the following source is before the address of the
last target, which is impossible as execution would have had to have
gone backwards:
ffff800080849d40 _find_next_and_bit+0x78 => ffff80008011cadc update_sg_lb_stats+0x94
(packet_queue fills here before a timestamp, resulting in a flush and
branch target ffff80008011cadc is duplicated.)
ffff80008011cb1c update_sg_lb_stats+0xd4 => ffff80008011cadc update_sg_lb_stats+0x94
ffff8000801117c4 cpu_util+0x24 => ffff8000801117d4 cpu_util+0x34
After removing the flush the correct branch target is used for the
second sample, and ffff8000801117c4 is no longer before the previous
address:
ffff800080849d40 _find_next_and_bit+0x78 => ffff80008011cadc update_sg_lb_stats+0x94
ffff80008011cb1c update_sg_lb_stats+0xd4 => ffff8000801117a0 cpu_util+0x0
ffff8000801117c4 cpu_util+0x24 => ffff8000801117d4 cpu_util+0x34
Make sure that a final branch stack is output at the end of the trace
by calling cs_etm__end_block(). This is already done for both the
timeless decode paths.
Fixes: 21fe8dc119 ("perf cs-etm: Add support for CPU-wide trace scenarios")
Reported-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Closes: https://lore.kernel.org/all/20240719092619.274730-1-gankulkarni@os.amperecomputing.com/
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ruidong Tian <tianruidong@linux.alibaba.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Cc: John Garry <john.g.garry@oracle.com>
Cc: scclevenger@os.amperecomputing.com
Link: https://lore.kernel.org/r/20240916135743.1490403-2-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 192a16a3430ca459c4e986f3d10758c4d6b1aa29 ]
Both the inner and outer loops in this code use the "i" iterator.
The inner loop should really use a different iterator.
It doesn't affect things in practice because the data comes from the
device tree. The "protocol" and "windows" variables are going to be
zero. That means we're always going to hit the "return &chans[channel];"
statement and we're not going to want to iterate through the outer
loop again.
Still it's worth fixing this for future use cases.
Fixes: 5a6338cce9 ("mailbox: arm_mhuv2: Add driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 128630e1dbec8074c7707aad107299169047e68f ]
Update this log message since cached fids may represent things other
than the root of a mount.
Fixes: e4029e0726 ("cifs: find and use the dentry for cached non-root directories also")
Signed-off-by: Paul Aurich <paul@darkrain42.org>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c64ef7e4851d1a9abbb7f7833e4936973ac5ba79 ]
In order to access the registers of the HW, we need to make sure that
the AXI bus clock is enabled. Hence let's increase the number of clocks
by one.
In order to keep backward compatibility and make sure old DTs still work
we check if clock-names is available or not. If it is, then we can
disambiguate between really having the AXI clock or a parent clock and
so we can enable the bus clock. If not, we fallback to what was done
before and don't explicitly enable the AXI bus clock.
Note that if clock-names is given, the axi clock must be the last one in
the phandle array (also enforced in the DT bindings) so that we can reuse
as much code as possible.
Fixes: 0e646c52cf ("clk: Add axi-clkgen driver")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20241029-axi-clkgen-fix-axiclk-v2-2-bc5e0733ad76@analog.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8404e56f4b ]
Pass the hardware device to the DMA helpers dma_alloc_coherent() and
dma_free_coherent(). The fbdev device that is currently being used is
a software device and does not provide DMA memory. Also update the
related dev_*() output statements similarly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-28-tzimmermann@suse.de
Stable-dep-of: f89d17ae2ac4 ("fbdev: sh7760fb: Fix a possible memory leak in sh7760fb_alloc_mem()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26686db69917399fa30e3b3135360771e90f83ec ]
Commit 6398326b9b ("KVM: PPC: Book3S HV P9: Stop using vc->dpdes")
dropped the use of vcore->dpdes for msgsndp / SMT emulation. Prior to that
commit, the below code at L1 level (see [1] for terminology) was
responsible for setting vc->dpdes for the respective L2 vCPU:
if (!nested) {
kvmppc_core_prepare_to_enter(vcpu);
if (vcpu->arch.doorbell_request) {
vc->dpdes = 1;
smp_wmb();
vcpu->arch.doorbell_request = 0;
}
L1 then sent vc->dpdes to L0 via kvmhv_save_hv_regs(), and while
servicing H_ENTER_NESTED at L0, the below condition at L0 level made sure
to abort and go back to L1 if vcpu->arch.doorbell_request = 1 so that L1
sets vc->dpdes as per above if condition:
} else if (vcpu->arch.pending_exceptions ||
vcpu->arch.doorbell_request ||
xive_interrupt_pending(vcpu)) {
vcpu->arch.ret = RESUME_HOST;
goto out;
}
This worked fine since vcpu->arch.doorbell_request was used more like a
flag and vc->dpdes was used to pass around the doorbell state. But after
Commit 6398326b9b ("KVM: PPC: Book3S HV P9: Stop using vc->dpdes"),
vcpu->arch.doorbell_request is the only variable used to pass around
doorbell state.
With the plumbing for handling doorbells for nested guests updated to use
vcpu->arch.doorbell_request over vc->dpdes, the above "else if" stops
doorbells from working correctly as L0 aborts execution of L2 and
instead goes back to L1.
Remove vcpu->arch.doorbell_request from the above "else if" condition as
it is no longer needed for L0 to correctly handle the doorbell status
while running L2.
[1] Terminology
1. L0 : PowerNV linux running with HV privileges
2. L1 : Pseries KVM guest running on top of L0
2. L2 : Nested KVM guest running on top of L1
Fixes: 6398326b9b ("KVM: PPC: Book3S HV P9: Stop using vc->dpdes")
Signed-off-by: Gautam Menghani <gautam@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241109063301.105289-4-gautam@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d3c6b28896f9889c8864dab469e0343a0ad1c0c ]
commit 6398326b9b ("KVM: PPC: Book3S HV P9: Stop using vc->dpdes")
introduced an optimization to use only vcpu->doorbell_request for SMT
emulation for Power9 and above guests, but the code for nested guests
still relies on the old way of handling doorbells, due to which an L2
guest (see [1]) cannot be booted with XICS with SMT>1. The command to
repro this issue is:
// To be run in L1
qemu-system-ppc64 \
-drive file=rhel.qcow2,format=qcow2 \
-m 20G \
-smp 8,cores=1,threads=8 \
-cpu host \
-nographic \
-machine pseries,ic-mode=xics -accel kvm
Fix the plumbing to utilize vcpu->doorbell_request instead of vcore->dpdes
for nested KVM guests on P9 and above.
[1] Terminology
1. L0 : PowerNV linux running with HV privileges
2. L1 : Pseries KVM guest running on top of L0
2. L2 : Nested KVM guest running on top of L1
Fixes: 6398326b9b ("KVM: PPC: Book3S HV P9: Stop using vc->dpdes")
Signed-off-by: Gautam Menghani <gautam@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241109063301.105289-3-gautam@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit adc77b19f62d7e80f98400b2fca9d700d2afdd6f ]
Syzbot has reported the following KMSAN splat:
BUG: KMSAN: uninit-value in ocfs2_file_read_iter+0x9a4/0xf80
ocfs2_file_read_iter+0x9a4/0xf80
__io_read+0x8d4/0x20f0
io_read+0x3e/0xf0
io_issue_sqe+0x42b/0x22c0
io_wq_submit_work+0xaf9/0xdc0
io_worker_handle_work+0xd13/0x2110
io_wq_worker+0x447/0x1410
ret_from_fork+0x6f/0x90
ret_from_fork_asm+0x1a/0x30
Uninit was created at:
__alloc_pages_noprof+0x9a7/0xe00
alloc_pages_mpol_noprof+0x299/0x990
alloc_pages_noprof+0x1bf/0x1e0
allocate_slab+0x33a/0x1250
___slab_alloc+0x12ef/0x35e0
kmem_cache_alloc_bulk_noprof+0x486/0x1330
__io_alloc_req_refill+0x84/0x560
io_submit_sqes+0x172f/0x2f30
__se_sys_io_uring_enter+0x406/0x41c0
__x64_sys_io_uring_enter+0x11f/0x1a0
x64_sys_call+0x2b54/0x3ba0
do_syscall_64+0xcd/0x1e0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Since an instance of 'struct kiocb' may be passed from the block layer
with 'private' field uninitialized, introduce 'ocfs2_iocb_init_rw_locked()'
and use it from where 'ocfs2_dio_end_io()' might take care, i.e. in
'ocfs2_file_read_iter()' and 'ocfs2_file_write_iter()'.
Link: https://lkml.kernel.org/r/20241029091736.1501946-1-dmantipov@yandex.ru
Fixes: 7cdfc3a1c3 ("ocfs2: Remember rw lock level during direct io")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reported-by: syzbot+a73e253cca4f0230a5a5@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a73e253cca4f0230a5a5
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b51eb0874d8170028434fbd259e80b78ed9b8eca ]
cppc_get_cpu_power() return 0 if the policy is NULL. Then in
em_create_perf_table(), the later zero check for power is not valid
as power is uninitialized. As Quentin pointed out, kernel energy model
core check the return value of active_power() first, so if the callback
failed it should tell the core. So return -EINVAL to fix it.
Fixes: a78e72075642 ("cpufreq: CPPC: Fix possible null-ptr-deref for cpufreq_cpu_get_raw()")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Quentin Perret <qperret@google.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be392aa80f1e5b0b65ccc2a540b9304fefcfe3d8 ]
cppc_get_cpu_cost() return 0 if the policy is NULL. Then in
em_compute_costs(), the later zero check for cost is not valid
as cost is uninitialized. As Quentin pointed out, kernel energy model
core check the return value of get_cost() first, so if the callback
failed it should tell the core. Return -EINVAL to fix it.
Fixes: 1a1374bb8c59 ("cpufreq: CPPC: Fix possible null-ptr-deref for cppc_get_cpu_cost()")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/c4765377-7830-44c2-84fa-706b6e304e10@stanley.mountain/
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Quentin Perret <qperret@google.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5dbcb1c1900f45182b5651c89257c272f1f3ead7 ]
The FENCE indicator in hns WQE doesn't ensure that response data from
a previous Read/Atomic operation has been written to the requester's
memory before the subsequent Send/Write operation is processed. This
may result in the subsequent Send/Write operation accessing the original
data in memory instead of the expected response data.
Unlike FENCE, the SO (Strong Order) indicator blocks the subsequent
operation until the previous response data is written to memory and a
bresp is returned. Set the SO indicator instead of FENCE to maintain
strict order.
Fixes: 9a4435375c ("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241108075743.2652258-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 82e33f249f1126cf3c5f39a31b850d485ac33bc3 ]
Coccinelle complains about the nested reuse of the pointer `iter' with
different pointer type:
./fs/proc/kcore.c:515:26-30: ERROR: invalid reference to the index variable of the iterator on line 499
./fs/proc/kcore.c:534:23-27: ERROR: invalid reference to the index variable of the iterator on line 499
./fs/proc/kcore.c:550:40-44: ERROR: invalid reference to the index variable of the iterator on line 499
./fs/proc/kcore.c:568:27-31: ERROR: invalid reference to the index variable of the iterator on line 499
./fs/proc/kcore.c:581:28-32: ERROR: invalid reference to the index variable of the iterator on line 499
./fs/proc/kcore.c:599:27-31: ERROR: invalid reference to the index variable of the iterator on line 499
./fs/proc/kcore.c:607:38-42: ERROR: invalid reference to the index variable of the iterator on line 499
./fs/proc/kcore.c:614:26-30: ERROR: invalid reference to the index variable of the iterator on line 499
Replacing `struct kcore_list *iter' with `struct kcore_list *tmp' doesn't change the
scope and the functionality is the same and coccinelle seems happy.
NOTE: There was an issue with using `struct kcore_list *pos' as the nested iterator.
The build did not work!
[akpm@linux-foundation.org: s/tmp/pos/]
Link: https://lkml.kernel.org/r/20241029054651.86356-2-mtodorovac69@gmail.com
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Link: https://lkml.kernel.org/r/20220331223700.902556-1-jakobkoschel@gmail.com
Fixes: 04d168c6d4 ("fs/proc/kcore.c: remove check of list iterator against head past the loop body")
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Brian Johannesmeyer" <bjohannesmeyer@gmail.com>
Cc: Cristiano Giuffrida <c.giuffrida@vu.nl>
Cc: "Bos, H.J." <h.j.bos@vu.nl>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Yan Zhen <yanzhen@vivo.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1645676f25d2c846798f0233c3a953efd62aafb ]
There are some issues in pgtable_walk():
1. Super page is dumped as non-present page
2. dma_pte_superpage() should not check against leaf page table entries
3. Pointer pte is never NULL so checking it is meaningless
4. When an entry is not present, it still makes sense to dump the entry
content.
Fix 1,2 by checking dma_pte_superpage()'s returned value after level check.
Fix 3 by removing pte check.
Fix 4 by checking present bit after printing.
By this chance, change to print "page table not present" instead of "PTE
not present" to be clearer.
Fixes: 914ff7719e ("iommu/vt-d: Dump DMAR translation structure when DMA fault occurs")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Link: https://lore.kernel.org/r/20241024092146.715063-3-zhenzhong.duan@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ceb93f952f6ca34823ce3650c902c31b8385b40 ]
There are some issues in dmar_fault_dump_ptes():
1. return value of phys_to_virt() is used for checking if an entry is
present.
2. dump is confusing, e.g., "pasid table entry is not present", confusing
by unpresent pasid table vs. unpresent pasid table entry. Current code
means the former.
3. pgtable_walk() is called without checking if page table is present.
Fix 1 by checking present bit of an entry before dump a lower level entry.
Fix 2 by removing "entry" string, e.g., "pasid table is not present".
Fix 3 by checking page table present before walk.
Take issue 3 for example, before fix:
[ 442.240357] DMAR: pasid dir entry: 0x000000012c83e001
[ 442.246661] DMAR: pasid table entry[0]: 0x0000000000000000
[ 442.253429] DMAR: pasid table entry[1]: 0x0000000000000000
[ 442.260203] DMAR: pasid table entry[2]: 0x0000000000000000
[ 442.266969] DMAR: pasid table entry[3]: 0x0000000000000000
[ 442.273733] DMAR: pasid table entry[4]: 0x0000000000000000
[ 442.280479] DMAR: pasid table entry[5]: 0x0000000000000000
[ 442.287234] DMAR: pasid table entry[6]: 0x0000000000000000
[ 442.293989] DMAR: pasid table entry[7]: 0x0000000000000000
[ 442.300742] DMAR: PTE not present at level 2
After fix:
...
[ 357.241214] DMAR: pasid table entry[6]: 0x0000000000000000
[ 357.248022] DMAR: pasid table entry[7]: 0x0000000000000000
[ 357.254824] DMAR: scalable mode page table is not present
Fixes: 914ff7719e ("iommu/vt-d: Dump DMAR translation structure when DMA fault occurs")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Link: https://lore.kernel.org/r/20241024092146.715063-2-zhenzhong.duan@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
