[ Upstream commit b94335f899 ]
bigben_probe() does not validate that the output report has the
needed report values in the first field.
A malicious device registering a report with one field and a single
value causes an head OOB write in bigben_worker() when
accessing report_field->value[1] to report_field->value[7].
Use hid_validate_values() which takes care of all the needed checks.
Fixes: 256a90ed9e ("HID: hid-bigbenff: driver for BigBen Interactive PS3OFMINIPAD gamepad")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Link: https://lore.kernel.org/r/20230211-bigben-oob-v1-1-d2849688594c@diag.uniroma1.it
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 350bd245fc ]
The mute key, is broken. All the consumer keys on the keyboard USB
interface work normally, except for mute which only sends press events
and never sends release events.
The touchpad key sends the otherwise unused input report with a report-id
of 5 on the touchpad interface. It too only sends press events. This also
requires extra special handling since the multi-touch touchpad events and
the KEY_F21 events for the touchpad toggle must not be send from the same
input_dev (userspace cannot handle this).
This commit adds special handlig for both, fixing these keys not working.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Stable-dep-of: 4ab3a086d1 ("HID: asus: use spinlock to safely schedule workers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e271f6c2df ]
The multi-touch touchpad found on the Medion Akoya E1239T's keyboard-dock,
uses the same custom multi-touch protocol as the Asus keyboard-docks
(same chipset vendor, Integrated Technology Express / ITE).
Add support for this using the existing multi-touch touchpad support in
the hid-asus driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Stable-dep-of: 4ab3a086d1 ("HID: asus: use spinlock to safely schedule workers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a61f9e428b ]
Add the report_size to struct asus_touchpad_info instead of calculating it.
This is a preparation patch for adding support for the multi-touch touchpad
found on the Medion Akoya E1239T's keyboard-dock, which uses the same
custom multi-touch protocol as the Asus keyboard-docks (same chipset
vendor, Integrated Technology Express / ITE).
The only difference in that the Akoya E1239T keyboard-dock's input-reports
have a 5 byte footer instead of a 1 byte footer, which requires the
report_size to be configurable per touchpad-model.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Stable-dep-of: 4ab3a086d1 ("HID: asus: use spinlock to safely schedule workers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e4c60f826 ]
Make asus_input_mapping() only set EV_REP if we are adding a mapping.
The T100CHI bluetooth keyboard dock has a few input reports for which
we do not create any mappings (these input-reports are present in the
descriptors but never send).
The hid-asus code relies on the HID core not creating input devices for
input-reports without any mappings. But the present of the EV_REP but
counts as a mapping causing 6 /dev/input/event# nodes to be created for
the T100CHI bluetooth keyboard dock. This change brings the amount of
created /dev/input/event# nodes / input-devices down to 4.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Stable-dep-of: 4ab3a086d1 ("HID: asus: use spinlock to safely schedule workers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27d2a2fd84 ]
bigben_worker() checks report_field to be non-NULL.
The check has been added in commit
918aa1ef10 ("HID: bigbenff: prevent null pointer dereference")
to prevent a NULL pointer crash.
However, the true root cause was a missing check for output
reports, patched in commit
c7bf714f87 ("HID: check empty report_list in bigben_probe()"),
where the type-confused report list_entry was overlapping with
a NULL pointer, which was then causing the crash.
Fixes: 918aa1ef10 ("HID: bigbenff: prevent null pointer dereference")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Link: https://lore.kernel.org/r/20230125-hid-unregister-leds-v4-2-7860c5763c38@diag.uniroma1.it
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d62ef4280 ]
To fix compilation warnings:
- struct 'snd_soc_pcm_runtime' declared inside parameter list will not
be visible outside of this definition or declaration
- struct 'soc_enum' declared inside parameter list will not be visible
outside of this definition or declaration
Declares the missing structure prototypes.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200625153543.85039-3-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: fdff966bfd ("ASoC: soc-dapm.h: fixup warning struct snd_pcm_substream not declared")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b22ff5360 ]
Commit acfe0ad74d ("dm: allocate a special workqueue for deferred
device removal") switched from using system workqueue to a single
workqueue local to DM. But it didn't eliminate the call to
flush_scheduled_work() that was introduced purely for the benefit of
deferred device removal with commit 2c140a246d ("dm: allow remove to
be deferred").
Since DM core uses its own workqueue (and queue_work) there is no need
to call flush_scheduled_work() from local_exit(). local_exit()'s
destroy_workqueue(deferred_remove_workqueue) handles flushing work
started with queue_work().
Fixes: acfe0ad74d ("dm: allocate a special workqueue for deferred device removal")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1ffd3c462 ]
Currently for broken fan driver returns value calculated based on error
code (0xFF) in related fan speed register.
Thus, for such fan user gets fan{n}_fault to 1 and fan{n}_input with
misleading value.
Add check for fan fault prior return speed value and return zero if
fault is detected.
Fixes: 65afb4c8e7 ("hwmon: (mlxreg-fan) Add support for Mellanox FAN driver")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20230212145730.24247-1-vadimp@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 811ff802aa ]
Currently the driver always sets the controller to dual data bit mode
for both tx and rx data in the profile mode control register even for
single data bit transfer. Luckily the opcode is set correctly according
to SPI transfer data bit width so it does not actually cause issues.
This change fixes the problem by setting tx and rx data bit mode field
correctly according to the actual SPI transfer tx and rx data bit width.
Fixes: 142168eba9 ("spi: bcm63xx-hsspi: add bcm63xx HSSPI driver")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20230209200246.141520-11-william.zhang@broadcom.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 178b01eccf ]
ltc2945_val_to_reg errors were not being handled
which would have resulted in register being set to
0 (clamped) instead of being left alone.
Fixes: 6700ce035f ("hwmon: Driver for Linear Technologies LTC2945")
Signed-off-by: Jonathan Cormier <jcormier@criticallink.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb258cc1fd ]
The code to write the syncpoint channel assignment register
incorrectly skips the write if hypervisor registers are not available.
The register, however, is within the guest aperture so remove the
check and assign syncpoints properly even on virtualized systems.
Fixes: c3f52220f2 ("gpu: host1x: Enable Tegra186 syncpoint protection")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7beb691f1e ]
At the end of a commit, atomic helpers can generate a fake VBLANK event
automatically. Originally implemented for writeback connectors, the
functionality can be used by any driver and/or hardware without proper
VBLANK interrupt.
The patch updates the documentation to make this behaviour official:
settings struct drm_crtc_state.no_vblank to true enables automatic
generation of fake VBLANK events.
The new interface drm_dev_has_vblank() returns true if vblanking has
been initialized for a device, or false otherwise. Atomic helpers use
this function when initializing no_vblank in the CRTC state in
drm_atomic_helper_check_modeset(). If vblanking has been initialized
for a device, no_blank is disabled. Otherwise it's enabled. Hence,
atomic helpers will automatically send out fake VBLANK events with any
driver that did not initialize vblanking.
v5:
* more precise documentation and commit message
v4:
* replace drm_crtc_has_vblank() with drm_dev_has_vblank()
* add drm_dev_has_vblank() in this patch
* move driver changes into separate patches
v3:
* squash all related changes patches into this patch
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200129120531.6891-2-tzimmermann@suse.de
Stable-dep-of: 13fcfcb2a9 ("drm/msm/mdp5: Add check for kzalloc")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9d27c6be5 ]
The MIPI DCS specification demands that brightness values are sent in
big endian byte order. It also states that one parameter (i.e. one byte)
shall be sent/received for 8 bit wide values, and two parameters shall
be used for values that are between 9 and 16 bits wide.
Add new functions to properly handle 16-bit brightness in big endian,
since the two 8- and 16-bit cases are distinct from each other.
[richard: use separate functions instead of switch/case]
[richard: split into 16-bit component]
Fixes: 1a9d759331 ("drm/dsi: Implement DCS set/get display brightness")
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Link: 754affd62d
[richard: fix 16-bit brightness_get]
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Tested-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230116224909.23884-2-mailingradian@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ee0fe7fa3 ]
Although the "dma_chan" pointer occupies more or equal space compared
to "*dma_chan", the allocation size should use the size of variable
itself.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 01ef7dbffb ("ALSA: hda - Update CA0132 codec to load DSP firmware binary")
Signed-off-by: Alexey V. Vissarionov <gremlin@altlinux.org>
Link: https://lore.kernel.org/r/20230117111522.GA15213@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ecff954c3 ]
A problem about insmod megachips-stdpxxxx-ge-b850v3-fw.ko failed is
triggered with the following log given:
[ 4497.981497] Error: Driver 'stdp4028-ge-b850v3-fw' is already registered, aborting...
insmod: ERROR: could not insert module megachips-stdpxxxx-ge-b850v3-fw.ko: Device or resource busy
The reason is that stdpxxxx_ge_b850v3_init() returns i2c_add_driver()
directly without checking its return value, if i2c_add_driver() failed,
it returns without calling i2c_del_driver() on the previous i2c driver,
resulting the megachips-stdpxxxx-ge-b850v3-fw can never be installed
later.
A simple call graph is shown as below:
stdpxxxx_ge_b850v3_init()
i2c_add_driver(&stdp4028_ge_b850v3_fw_driver)
i2c_add_driver(&stdp2690_ge_b850v3_fw_driver)
i2c_register_driver()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without delete stdp4028_ge_b850v3_fw_driver
Fix by calling i2c_del_driver() on stdp4028_ge_b850v3_fw_driver when
i2c_add_driver() returns error.
Fixes: fcfa0ddc18 ("drm/bridge: Drivers for megachips-stdpxxxx-ge-b850v3-fw (LVDS-DP++)")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Tested-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108091226.114524-1-yuancan@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6fb6c979ca ]
As of commit eae06120f1 ("drm: refuse ADDFB2 ioctl for broken
bigendian drivers"), drivers must set the
quirk_addfb_prefer_host_byte_order quirk to make the drm_mode_addfb()
compat code work correctly on big-endian machines.
While that works fine for big-endian XRGB8888 and ARGB8888, which are
mapped to the existing little-endian BGRX8888 and BGRA8888 formats, it
does not work for big-endian XRGB1555 and RGB565, as the latter are not
listed in the format database.
Fix this by adding the missing formats. Limit this to big-endian
platforms, as there is currently no need to support these formats on
little-endian platforms.
Fixes: 6960e6da9c ("drm: fix drm_mode_addfb() on big endian machines.")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/3ee1f8144feb96c28742b22384189f1f83bcfc1a.1669221671.git.geert@linux-m68k.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b60417a9f2 ]
Usage of `set -e` before executing a command causes immediate exit
on failure, without cleanup up the resources allocated at setup.
This can affect the next tests that use the same resources,
leading to a chain of failures.
A simple fix is to always call cleanup function when the script exists.
This approach is already used by other existing tests.
Fixes: 1056691b26 ("selftests: fib_tests: Make test results more verbose")
Signed-off-by: Roxana Nicolescu <roxana.nicolescu@canonical.com>
Link: https://lore.kernel.org/r/20230220110400.26737-2-roxana.nicolescu@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 436864095a ]
Data passed to user-space with a (SOL_UDP, UDP_GRO) cmsg carries an
int (see udp_cmsg_recv), not a u16 value, as strace confirms:
recvmsg(8, {msg_name=...,
msg_iov=[{iov_base="\0\0..."..., iov_len=96000}],
msg_iovlen=1,
msg_control=[{cmsg_len=20, <-- sizeof(cmsghdr) + 4
cmsg_level=SOL_UDP,
cmsg_type=0x68}], <-- UDP_GRO
msg_controllen=24,
msg_flags=0}, 0) = 11200
Interpreting the data as an u16 value won't work on big-endian platforms.
Since it is too late to back out of this API decision [1], fix the test.
[1]: https://lore.kernel.org/netdev/20230131174601.203127-1-jakub@cloudflare.com/
Fixes: 3327a9c463 ("selftests: add functionals test for UDP GRO")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13a157b38c ]
When support for the interrupt controller was added with a5042de268,
we forgot to update the flags to be set to contain IRQ_LEVEL. While the
flow handler is correct, the output from /proc/interrupts does not show
such interrupts as being level triggered when they are, correct that.
Fixes: a5042de268 ("irqchip: bcm7120-l2: Add Broadcom BCM7120-style Level 2 interrupt controller")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221216230934.2478345-3-f.fainelli@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94debe03e8 ]
When support for the level triggered interrupt controller flavor was
added with c0ca726208, we forgot to update the flags to be set to
contain IRQ_LEVEL. While the flow handler is correct, the output from
/proc/interrupts does not show such interrupts as being level triggered
when they are, correct that.
Fixes: c0ca726208 ("irqchip/brcmstb-l2: Add support for the BCM7271 L2 controller")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221216230934.2478345-2-f.fainelli@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
