[ Upstream commit f1ee5483e40881d8ad5a63aa148b753b5c6a839b ]
In the function yas537_measure() there is a clamp_val() with limits of
-BIT(13) and BIT(13) - 1. The input clamp value h[] is of type s32. The
BIT() is of type unsigned long integer due to its define in
include/vdso/bits.h. The lower limit -BIT(13) is recognized as -8192 but
expressed as an unsigned long integer. The size of an unsigned long
integer differs between 32-bit and 64-bit architectures. Converting this
to type s32 may lead to undesired behavior.
Additionally, in the calculation lines h[0], h[1] and h[2] the unsigned
long integer divisor BIT(13) causes an unsigned division, shifting the
left-hand side of the equation back and forth, possibly ending up in large
positive values instead of negative values on 32-bit architectures.
To solve those two issues, declare a signed integer with a value of
BIT(13).
There is another omission in the clamp line: clamp_val() returns a value
and it's going nowhere here. Self-assign it to h[i] to make use of the
clamp macro.
Finally, replace clamp_val() macro by clamp() because after changing the
limits from type unsigned long integer to signed integer it's fine that
way.
Link: https://lkml.kernel.org/r/11609b2243c295d65ab4d47e78c239d61ad6be75.1732914810.git.jahau@rocketmail.com
Fixes: 65f79b5010 ("iio: magnetometer: yas530: Add YAS537 variant")
Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411230458.dhZwh3TT-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202411282222.oF0B4110-lkp@intel.com/
Reviewed-by: David Laight <david.laight@aculab.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d89c8ec0546184267cb211b579514ebaf8916100 ]
Fix a kernel-doc warning by making the kernel-doc function description
match the function name:
include/linux/scatterlist.h:323: warning: expecting prototype for sg_unmark_bus_address(). Prototype was for sg_dma_unmark_bus_address() instead
Link: https://lkml.kernel.org/r/20241130022406.537973-1-rdunlap@infradead.org
Fixes: 4239930120 ("lib/scatterlist: add flag for indicating P2PDMA segments in an SGL")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c98b10496b2f3c4f576af3482c71aadcfcbf765e ]
On the Raspberry Pi 5, performance counters are not being cleared
when `v3d_perfmon_start()` is called, even though we write to the
CLR register. As a result, their values accumulate until they
overflow.
The expected behavior is for performance counters to reset to zero
at the start of a job. When the job finishes and the perfmon is
stopped, the counters should accurately reflect the values for that
specific job.
To ensure this behavior, the performance counters are now enabled
before being cleared. This allows the CLR register to function as
intended, zeroing the counter values when the job begins.
Fixes: 26a4dc29b7 ("drm/v3d: Expose performance counters to userspace")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241204122831.17015-1-mcanal@igalia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6918141d815acef056a0d10e966a027d869a922d ]
Since commit 771f712ba5 ("scsi: scsi_debug: Fix cmd duration
calculation"), ns_from_boot value is only evaluated in schedule_resp()
for polled requests.
However, ns_from_boot is also required for hrtimer support for when
ndelay is less than INCLUSIVE_TIMING_MAX_NS, so fix up the logic to
decide when to evaluate ns_from_boot.
Fixes: 771f712ba5 ("scsi: scsi_debug: Fix cmd duration calculation")
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241202130045.2335194-1-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 537a2525eaf76ea9b0dca62b994500d8670b39d5 ]
There are a number of tools (bpftool, selftests), that require a
"bootstrap" build. Here, a bootstrap build is a build host variant of
a target. E.g., assume that you're performing a bpftool cross-build on
x86 to riscv, a bootstrap build would then be an x86 variant of
bpftool. The typical way to perform the host build variant, is to pass
"ARCH=" in a sub-make. However, if a variable has been set with a
command argument, then ordinary assignments in the makefile are
ignored.
This side-effect results in that ARCH, and variables depending on ARCH
are not set. Workaround by overriding ARCH to the host arch, if ARCH
is empty.
Fixes: 8859b0da5a ("tools/bpftool: Fix cross-build")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Quentin Monnet <qmo@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/bpf/20241127101748.165693-1-bjorn@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f9d674377d090e38d93360bd4df21b67534d622 ]
The low-latency mode of USB-audio driver uses a similar approach like
the implicit feedback mode but it has an explicit queuing at the
trigger start time. The difference is, however, that no packet will
be handled any longer after all queued packets are handled but no
enough data is fed. In the case of implicit feedback mode, the
capture-side packet handling triggers the re-queuing, and this checks
the XRUN. OTOH, in the low-latency mode, it just stops without XRUN
notification unless any new action is taken from user-space via ack
callback. For example, when you stop the stream in aplay, no XRUN is
reported.
This patch adds the XRUN check at the packet complete callback in the
case all pending URBs are exhausted. Strictly speaking, this state
doesn't match really with XRUN; in theory the application may queue
immediately after this happens. But such behavior is only for
1-period configuration, which the USB-audio driver doesn't support.
So we may conclude that this situation leads certainly to XRUN.
A caveat is that the XRUN should be triggered only for the PCM RUNNING
state, and not during DRAINING. This additional state check is put in
notify_xrun(), too.
Fixes: d5f871f89e ("ALSA: usb-audio: Improved lowlatency playback support")
Reported-by: Leonard Crestez <cdleonard@gmail.com>
Link: https://lore.kernel.org/25d5b0d8-4efd-4630-9d33-7a9e3fa9dc2b@gmail.com
Link: https://patch.msgid.link/20241128080446.1181-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca70b8baf2bd125b2a4d96e76db79375c07d7ff2 ]
The current sk memory accounting logic in __SK_REDIRECT is pre-uncharging
tosend bytes, which is either msg->sg.size or a smaller value apply_bytes.
Potential problems with this strategy are as follows:
- If the actual sent bytes are smaller than tosend, we need to charge some
bytes back, as in line 487, which is okay but seems not clean.
- When tosend is set to apply_bytes, as in line 417, and (ret < 0), we may
miss uncharging (msg->sg.size - apply_bytes) bytes.
[...]
415 tosend = msg->sg.size;
416 if (psock->apply_bytes && psock->apply_bytes < tosend)
417 tosend = psock->apply_bytes;
[...]
443 sk_msg_return(sk, msg, tosend);
444 release_sock(sk);
446 origsize = msg->sg.size;
447 ret = tcp_bpf_sendmsg_redir(sk_redir, redir_ingress,
448 msg, tosend, flags);
449 sent = origsize - msg->sg.size;
[...]
454 lock_sock(sk);
455 if (unlikely(ret < 0)) {
456 int free = sk_msg_free_nocharge(sk, msg);
458 if (!cork)
459 *copied -= free;
460 }
[...]
487 if (eval == __SK_REDIRECT)
488 sk_mem_charge(sk, tosend - sent);
[...]
When running the selftest test_txmsg_redir_wait_sndmem with txmsg_apply,
the following warning will be reported:
------------[ cut here ]------------
WARNING: CPU: 6 PID: 57 at net/ipv4/af_inet.c:156 inet_sock_destruct+0x190/0x1a0
Modules linked in:
CPU: 6 UID: 0 PID: 57 Comm: kworker/6:0 Not tainted 6.12.0-rc1.bm.1-amd64+ #43
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Workqueue: events sk_psock_destroy
RIP: 0010:inet_sock_destruct+0x190/0x1a0
RSP: 0018:ffffad0a8021fe08 EFLAGS: 00010206
RAX: 0000000000000011 RBX: ffff9aab4475b900 RCX: ffff9aab481a0800
RDX: 0000000000000303 RSI: 0000000000000011 RDI: ffff9aab4475b900
RBP: ffff9aab4475b990 R08: 0000000000000000 R09: ffff9aab40050ec0
R10: 0000000000000000 R11: ffff9aae6fdb1d01 R12: ffff9aab49c60400
R13: ffff9aab49c60598 R14: ffff9aab49c60598 R15: dead000000000100
FS: 0000000000000000(0000) GS:ffff9aae6fd80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffec7e47bd8 CR3: 00000001a1a1c004 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __warn+0x89/0x130
? inet_sock_destruct+0x190/0x1a0
? report_bug+0xfc/0x1e0
? handle_bug+0x5c/0xa0
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? inet_sock_destruct+0x190/0x1a0
__sk_destruct+0x25/0x220
sk_psock_destroy+0x2b2/0x310
process_scheduled_works+0xa3/0x3e0
worker_thread+0x117/0x240
? __pfx_worker_thread+0x10/0x10
kthread+0xcf/0x100
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x40
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
---[ end trace 0000000000000000 ]---
In __SK_REDIRECT, a more concise way is delaying the uncharging after sent
bytes are finalized, and uncharge this value. When (ret < 0), we shall
invoke sk_msg_free.
Same thing happens in case __SK_DROP, when tosend is set to apply_bytes,
we may miss uncharging (msg->sg.size - apply_bytes) bytes. The same
warning will be reported in selftest.
[...]
468 case __SK_DROP:
469 default:
470 sk_msg_free_partial(sk, msg, tosend);
471 sk_msg_apply_bytes(psock, tosend);
472 *copied -= (tosend + delta);
473 return -EACCES;
[...]
So instead of sk_msg_free_partial we can do sk_msg_free here.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Fixes: 8ec95b9471 ("bpf, sockmap: Fix the sk->sk_forward_alloc warning of sk_stream_kill_queues")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241016234838.3167769-3-zijianzhang@bytedance.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 55b4de58d0 ]
The JIT disassembler in bpftool is the only components (with the JSON
writer) using asserts to check the return values of functions. But it
does not do so in a consistent way, and diasm_print_insn() returns no
value, although sometimes the operation failed.
Remove the asserts, and instead check the return values, print messages
on errors, and propagate the error to the caller from prog.c.
Remove the inclusion of assert.h from jit_disasm.c, and also from map.c
where it is unused.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Tested-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20221025150329.97371-3-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: ef3ba8c258ee ("bpftool: fix potential NULL pointer dereferencing in prog_dump()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac9a48a6f1610b094072b815e884e1668aea4401 ]
When the umem is shared, the DMA mapping is also shared between the xsk
pools, therefore it should stay valid as long as at least 1 user remains.
However, the pool also keeps the copies of DMA-related information that are
initialized in the same way in xp_init_dma_info(), but cleared by
xp_dma_unmap() only for the last remaining pool, this causes the problems
below.
The first one is that the commit adbf5a42341f ("ice: remove af_xdp_zc_qps
bitmap") relies on pool->dev to determine the presence of a ZC pool on a
given queue, avoiding internal bookkeeping. This works perfectly fine if
the UMEM is not shared, but reliably fails otherwise as stated in the
linked report.
The second one is pool->dma_pages which is dynamically allocated and
only freed in xp_dma_unmap(), this leads to a small memory leak. kmemleak
does not catch it, but by printing the allocation results after terminating
the userspace program it is possible to see that all addresses except the
one belonging to the last detached pool are still accessible through the
kmemleak dump functionality.
Always clear the DMA mapping information from the pool and free
pool->dma_pages when unmapping the pool, so that the only difference
between results of the last remaining user's call and the ones before would
be the destruction of the DMA mapping.
Fixes: adbf5a42341f ("ice: remove af_xdp_zc_qps bitmap")
Fixes: 921b68692a ("xsk: Enable sharing of dma mappings")
Reported-by: Alasdair McWilliam <alasdair.mcwilliam@outlook.com>
Closes: https://lore.kernel.org/PA4P194MB10056F208AF221D043F57A3D86512@PA4P194MB1005.EURP194.PROD.OUTLOOK.COM
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://lore.kernel.org/r/20241122112912.89881-1-larysa.zaremba@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5f3f21728b069412e8072b8b1d0a3d9d3ab0265 ]
The IT6505 bridge chip has a active low reset line. Since it is a
"reset" and not an "enable" line, the GPIO should be asserted to
put it in reset and deasserted to bring it out of reset during
the power on sequence.
The polarity was inverted when the driver was first introduced, likely
because the device family that was targeted had an inverting level
shifter on the reset line.
The MT8186 Corsola devices already have the IT6505 in their device tree,
but the whole display pipeline is actually disabled and won't be enabled
until some remaining issues are sorted out. The other known user is
the MT8183 Kukui / Jacuzzi family; their device trees currently do not
have the IT6505 included.
Fix the polarity in the driver while there are no actual users.
Fixes: b5c84a9edc ("drm/bridge: add it6505 driver")
Cc: stable@vger.kernel.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029095411.657616-1-wenst@chromium.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73b03b27736e440e3009fe1319cbc82d2cd1290c ]
The device_for_each_child_node() macro requires explicit calls to
fwnode_handle_put() upon early exits to avoid memory leaks, and in
this case the error paths are handled after jumping to
'out_flash_realease', which misses that required call to
to decrement the refcount of the child node.
A more elegant and robust solution is using the scoped variant of the
loop, which automatically handles such early exits.
Fix the child node refcounting in the error paths by using
device_for_each_child_node_scoped().
Cc: stable@vger.kernel.org
Fixes: 679f865206 ("leds: Add mt6360 driver")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-1-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 365130fd47af6d4317aa16a407874b699ab8d8cb ]
Similar to recently propose for_each_child_of_node_scoped() this
new version of the loop macro instantiates a new local
struct fwnode_handle * that uses the __free(fwnode_handle) auto
cleanup handling so that if a reference to a node is held on early
exit from the loop the reference will be released. If the loop
runs to completion, the child pointer will be NULL and no action will
be taken.
The reason this is useful is that it removes the need for
fwnode_handle_put() on early loop exits. If there is a need
to retain the reference, then return_ptr(child) or no_free_ptr(child)
may be used to safely disable the auto cleanup.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20240217164249.921878-5-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 73b03b27736e ("leds: flash: mt6360: Fix device_for_each_child_node() refcounting in error paths")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 688d2eb4c6fcfdcdaed0592f9df9196573ff5ce2 ]
In addition to a primary endpoint controller, an endpoint function may be
associated with a secondary endpoint controller, epf->sec_epc, to provide
NTB (non-transparent bridge) functionality.
Previously, pci_epc_remove_epf() incorrectly cleared epf->epc instead of
epf->sec_epc when removing from the secondary endpoint controller.
Extend the epc->list_lock coverage and clear either epf->epc or
epf->sec_epc as indicated.
Link: https://lore.kernel.org/r/20241107-epc_rfc-v2-2-da5b6a99a66f@quicinc.com
Fixes: 63840ff532 ("PCI: endpoint: Add support to associate secondary EPC with EPF")
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[mani: reworded subject and description]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d6dd5bafaa ]
The EPC controller maintains a list of EPF drivers added to it. For
protecting this list against the concurrent accesses, the epc->lock
(used for protecting epc_ops) has been used so far. Since there were
no users trying to use epc_ops and modify the pci_epf list simultaneously,
this was not an issue.
But with the addition of callback mechanism for passing the events, this
will be a problem. Because the pci_epf list needs to be iterated first
for getting hold of the EPF driver and then the relevant event specific
callback needs to be called for the driver.
If the same epc->lock is used, then it will result in a deadlock scenario.
For instance,
...
mutex_lock(&epc->lock);
list_for_each_entry(epf, &epc->pci_epf, list) {
epf->event_ops->core_init(epf);
|
|-> pci_epc_set_bar();
|
|-> mutex_lock(&epc->lock) # DEADLOCK
...
So to fix this issue, use a separate lock called "list_lock" for
protecting the pci_epf list against the concurrent accesses. This lock
will also be used by the callback mechanism.
Link: https://lore.kernel.org/linux-pci/20230124071158.5503-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Stable-dep-of: 688d2eb4c6fc ("PCI: endpoint: Clear secondary (not primary) EPC in pci_epc_remove_epf()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 851bd21cdb55e727ab29280bc9f6b678164f802a ]
If the DTS contains 'assigned-address', a dynamic address leak occurs
during hotjoin events.
Assume a device have assigned-address 0xb.
- Device issue Hotjoin
- Call i3c_master_do_daa()
- Call driver xxx_do_daa()
- Call i3c_master_get_free_addr() to get dynamic address 0x9
- i3c_master_add_i3c_dev_locked(0x9)
- expected_dyn_addr = newdev->boardinfo->init_dyn_addr (0xb);
- i3c_master_reattach_i3c_dev(newdev(0xb), old_dyn_addr(0x9));
- if (dev->info.dyn_addr != old_dyn_addr &&
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 0xb != 0x9 -> TRUE
(!dev->boardinfo ||
^^^^^^^^^^^^^^^ -> FALSE
dev->info.dyn_addr != dev->boardinfo->init_dyn_addr)) {
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
0xb != 0xb -> FALSE
...
i3c_bus_set_addr_slot_status(&master->bus, old_dyn_addr,
I3C_ADDR_SLOT_FREE);
^^^
This will be skipped. So old_dyn_addr never free
}
- i3c_master_get_free_addr() will return increased sequence number.
Remove dev->info.dyn_addr != dev->boardinfo->init_dyn_addr condition check.
dev->info.dyn_addr should be checked before calling this function because
i3c_master_setnewda_locked() has already been called and the target device
has already accepted dyn_addr. It is too late to check if dyn_addr is free
in i3c_master_reattach_i3c_dev().
Add check to ensure expected_dyn_addr is free before
i3c_master_setnewda_locked().
Fixes: cc3a392d69 ("i3c: master: fix for SETDASA and DAA process")
Cc: stable@kernel.org
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241021-i3c_dts_assign-v8-3-4098b8bde01e@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f552fa280590e61bd3dbe66a7b54b99caa642a4 ]
Extend the address status bit to 4 and introduce the
I3C_ADDR_SLOT_EXT_DESIRED macro to indicate that a device prefers a
specific address. This is generally set by the 'assigned-address' in the
device tree source (dts) file.
┌────┬─────────────┬───┬─────────┬───┐
│S/Sr│ 7'h7E RnW=0 │ACK│ ENTDAA │ T ├────┐
└────┴─────────────┴───┴─────────┴───┘ │
┌─────────────────────────────────────────┘
│ ┌──┬─────────────┬───┬─────────────────┬────────────────┬───┬─────────┐
└─►│Sr│7'h7E RnW=1 │ACK│48bit UID BCR DCR│Assign 7bit Addr│PAR│ ACK/NACK│
└──┴─────────────┴───┴─────────────────┴────────────────┴───┴─────────┘
Some master controllers (such as HCI) need to prepare the entire above
transaction before sending it out to the I3C bus. This means that a 7-bit
dynamic address needs to be allocated before knowing the target device's
UID information.
However, some I3C targets may request specific addresses (called as
"init_dyn_addr"), which is typically specified by the DT-'s
assigned-address property. Lower addresses having higher IBI priority. If
it is available, i3c_bus_get_free_addr() preferably return a free address
that is not in the list of desired addresses (called as "init_dyn_addr").
This allows the device with the "init_dyn_addr" to switch to its
"init_dyn_addr" when it hot-joins the I3C bus. Otherwise, if the
"init_dyn_addr" is already in use by another I3C device, the target device
will not be able to switch to its desired address.
If the previous step fails, fallback returning one of the remaining
unassigned address, regardless of its state in the desired list.
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241021-i3c_dts_assign-v8-2-4098b8bde01e@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 851bd21cdb55 ("i3c: master: Fix dynamic address leak when 'assigned-address' is present")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20ade67bb1645f5ce8f37fa79ddfebbc5b5b24ef ]
I3C controller should support adjusting open drain timing for the first
broadcast address to make I3C device working as a i2c device can see slow
broadcast address to close its Spike Filter to change working at i3c mode.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Frank Li <frank.li@nxp.com>
Link: https://lore.kernel.org/r/20240910051626.4052552-2-carlos.song@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 25bc99be5fe5 ("i3c: master: svc: Modify enabled_events bit 7:0 to act as IBI enable counter")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aef79e189ba2b32f78bd35daf2c0b41f3868a321 ]
According to I3C spec 6.2 Timing Specification, the Open Drain High Period
of SCL Clock timing for first broadcast address should be adjusted to 200ns
at least. I3C device working as i2c device will see the broadcast to close
its Spike Filter then change to work at I3C mode. After that I3C open drain
SCL high level should be adjusted back.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240910051626.4052552-1-carlos.song@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 25bc99be5fe5 ("i3c: master: svc: Modify enabled_events bit 7:0 to act as IBI enable counter")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34d946b723b53488ab39d8ac540ddf9db255317a ]
Fix warning found by
'scripts/kernel-doc -v -none include/linux/i3c/master.h'
include/linux/i3c/master.h:457: warning: Function parameter or member 'enable_hotjoin' not described in 'i3c_master_controller_ops'
include/linux/i3c/master.h:457: warning: Function parameter or member 'disable_hotjoin' not described in 'i3c_master_controller_ops'
include/linux/i3c/master.h:499: warning: Function parameter or member 'hotjoin' not described in 'i3c_master_controller'
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20240109052548.2128133-1-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 25bc99be5fe5 ("i3c: master: svc: Modify enabled_events bit 7:0 to act as IBI enable counter")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05b26c31a4859af9e75b7de77458e99358364fe1 ]
Add hot join support for svc master controller. Disable hot join by
default.
User can use sysfs entry to enable hot join.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231201222532.2431484-3-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 25bc99be5fe5 ("i3c: master: svc: Modify enabled_events bit 7:0 to act as IBI enable counter")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 317bacf960a4879af22d12175f47d284930b3273 ]
Add hotjoin entry in sys file system allow user enable/disable hotjoin
feature.
Add (*enable(disable)_hotjoin)() to i3c_master_controller_ops.
Add api i3c_master_enable(disable)_hotjoin();
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231201222532.2431484-2-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 25bc99be5fe5 ("i3c: master: svc: Modify enabled_events bit 7:0 to act as IBI enable counter")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bac3b10b78e54b7da3cede397258f75a2180609b ]
In attempting to optimize fw_devlink runtime, I introduced numerous cycle
detection bugs by foregoing cycle detection logic under specific
conditions. Each fix has further narrowed the conditions for optimization.
It's time to give up on these optimization attempts and just run the cycle
detection logic every time fw_devlink tries to create a device link.
The specific bug report that triggered this fix involved a supplier fwnode
that never gets a device created for it. Instead, the supplier fwnode is
represented by the device that corresponds to an ancestor fwnode.
In this case, fw_devlink didn't do any cycle detection because the cycle
detection logic is only run when a device link is created between the
devices that correspond to the actual consumer and supplier fwnodes.
With this change, fw_devlink will run cycle detection logic even when
creating SYNC_STATE_ONLY proxy device links from a device that is an
ancestor of a consumer fwnode.
Reported-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Closes: https://lore.kernel.org/all/1a1ab663-d068-40fb-8c94-f0715403d276@ideasonboard.com/
Fixes: 6442d79d880c ("driver core: fw_devlink: Improve detection of overlapping cycles")
Cc: stable <stable@kernel.org>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20241030171009.1853340-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7e1241d8f77ed64404a5e4450f43a319310fc91 ]
A fwnode link between specific supplier-consumer fwnodes can be added
multiple times for multiple reasons. If that dependency doesn't exist,
deleting the fwnode link once doesn't guarantee that it won't get created
again.
So, add FWLINK_FLAG_IGNORE flag to mark a fwnode link as one that needs to
be completely ignored. Since a fwnode link's flags is an OR of all the
flags passed to all the fwnode_link_add() calls to create that specific
fwnode link, the FWLINK_FLAG_IGNORE flag is preserved and can be used to
mark a fwnode link as on that need to be completely ignored until it is
deleted.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240305050458.1400667-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: bac3b10b78e5 ("driver core: fw_devlink: Stop trying to optimize cycle detection logic")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e7ad1aebb4fc9fed0217dd50ef6e58a53f17d81 ]
The links in a cycle are not all logged in a consistent manner or not
logged at all. Make them consistent by adding a "cycle:" string and log all
the link in the cycles (even the child ==> parent dependency) so that it's
easier to debug cycle detection code. Also, mark the start and end of a
cycle so it's easy to tell when multiple cycles are logged back to back.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240202095636.868578-4-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: bac3b10b78e5 ("driver core: fw_devlink: Stop trying to optimize cycle detection logic")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f5807b0606da7ac7c1b74a386b22134ec7702d05 upstream.
Due to an unsigned cast, adjtimex() returns the wrong offest when using
ADJ_MICRO and the offset is negative. In this case a small negative offset
returns approximately 4.29 seconds (~ 2^32/1000 milliseconds) due to the
unsigned cast of the negative offset.
This cast was added when the kernel internal struct timex was changed to
use type long long for the time offset value to address the problem of a
64bit/32bit division on 32bit systems.
The correct cast would have been (s32), which is correct as time_offset can
only be in the range of [INT_MIN..INT_MAX] because the shift constant used
for calculating it is 32. But that's non-obvious.
Remove the cast and use div_s64() to cure the issue.
[ tglx: Fix white space damage, use div_s64() and amend the change log ]
Fixes: ead25417f8 ("timex: use __kernel_timex internally")
Signed-off-by: Marcelo Dalmas <marcelo.dalmas@ge.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/SJ0P101MB03687BF7D5A10FD3C49C51E5F42E2@SJ0P101MB0368.NAMP101.PROD.OUTLOOK.COM
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d677ce521334d8f1f327cafc8b1b7854b0833158 ]
Under certain conditions, the 64-bit '-mstack-protector-guard' flags may
end up in the 32-bit vDSO flags, resulting in build failures due to the
structure of clang's argument parsing of the stack protector options,
which validates the arguments of the stack protector guard flags
unconditionally in the frontend, choking on the 64-bit values when
targeting 32-bit:
clang: error: invalid value 'r13' in 'mstack-protector-guard-reg=', expected one of: r2
clang: error: invalid value 'r13' in 'mstack-protector-guard-reg=', expected one of: r2
make[3]: *** [arch/powerpc/kernel/vdso/Makefile:85: arch/powerpc/kernel/vdso/vgettimeofday-32.o] Error 1
make[3]: *** [arch/powerpc/kernel/vdso/Makefile:87: arch/powerpc/kernel/vdso/vgetrandom-32.o] Error 1
Remove these flags by adding them to the CC32FLAGSREMOVE variable, which
already handles situations similar to this. Additionally, reformat and
align a comment better for the expanding CONFIG_CC_IS_CLANG block.
Cc: stable@vger.kernel.org # v6.1+
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241030-powerpc-vdso-drop-stackp-flags-clang-v1-1-d95e7376d29c@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6b67eb09963af29991625862cbb4f56b85954ed ]
In order to avoid two much duplication when we add new VDSO
functionnalities in C like getrandom, refactor common CFLAGS.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Stable-dep-of: d677ce521334 ("powerpc/vdso: Drop -mstack-protector-guard flags in 32-bit files with clang")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7e5eb53bf ]
A future change will move CLANG_FLAGS from KBUILD_{A,C}FLAGS to
KBUILD_CPPFLAGS so that '--target' is available while preprocessing.
When that occurs, the following error appears when building the compat
PowerPC vDSO:
clang: error: unsupported option '-mbig-endian' for target 'x86_64-pc-linux-gnu'
make[3]: *** [.../arch/powerpc/kernel/vdso/Makefile:76: arch/powerpc/kernel/vdso/vdso32.so.dbg] Error 1
Explicitly add CLANG_FLAGS to ldflags-y, so that '--target' will always
be present.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Stable-dep-of: d677ce521334 ("powerpc/vdso: Drop -mstack-protector-guard flags in 32-bit files with clang")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05e05bfc92 ]
When clang's -Qunused-arguments is dropped from KBUILD_CPPFLAGS, it
warns:
clang-16: error: argument unused during compilation: '-fno-stack-clash-protection' [-Werror,-Wunused-command-line-argument]
This warning happens because vgettimeofday-32.c gets its base CFLAGS
from the main kernel, which may contain flags that are only supported on
a 64-bit target but not a 32-bit one, which is the case here.
-fstack-clash-protection and its negation are only suppported by the
64-bit powerpc target but that flag is included in an invocation for a
32-bit powerpc target, so clang points out that while the flag is one
that it recognizes, it is not actually used by this compiler job.
To eliminate the warning, remove -fno-stack-clash-protection from
vgettimeofday-32.c's CFLAGS when using clang, as has been done for other
flags previously.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Stable-dep-of: d677ce521334 ("powerpc/vdso: Drop -mstack-protector-guard flags in 32-bit files with clang")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0a42fbab4 ]
When clang's -Qunused-arguments is dropped from KBUILD_CPPFLAGS, there
are several warnings in the PowerPC vDSO:
clang-16: error: -Wl,-soname=linux-vdso32.so.1: 'linker' input unused [-Werror,-Wunused-command-line-argument]
clang-16: error: -Wl,--hash-style=both: 'linker' input unused [-Werror,-Wunused-command-line-argument]
clang-16: error: argument unused during compilation: '-shared' [-Werror,-Wunused-command-line-argument]
clang-16: error: argument unused during compilation: '-nostdinc' [-Werror,-Wunused-command-line-argument]
clang-16: error: argument unused during compilation: '-Wa,-maltivec' [-Werror,-Wunused-command-line-argument]
The first group of warnings point out that linker flags were being added
to all invocations of $(CC), even though they will only be used during
the final vDSO link. Move those flags to ldflags-y.
The second group of warnings are compiler or assembler flags that will
be unused during linking. Filter them out from KBUILD_CFLAGS so that
they are not used during linking.
Additionally, '-z noexecstack' was added directly to the ld_and_check
rule in commit 1d53c0192b ("powerpc/vdso: link with -z noexecstack")
but now that there is a common ldflags variable, it can be moved there.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Stable-dep-of: d677ce521334 ("powerpc/vdso: Drop -mstack-protector-guard flags in 32-bit files with clang")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 024734d132 ]
When clang's -Qunused-arguments is dropped from KBUILD_CPPFLAGS, it
warns:
clang-16: error: argument unused during compilation: '-s' [-Werror,-Wunused-command-line-argument]
The compiler's '-s' flag is a linking option (it is passed along to the
linker directly), which means it does nothing when the linker is not
invoked by the compiler. The kernel builds all .o files with '-c', which
stops the compilation pipeline before linking, so '-s' can be safely
dropped from ASFLAGS.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Stable-dep-of: d677ce521334 ("powerpc/vdso: Drop -mstack-protector-guard flags in 32-bit files with clang")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72fca8371f205d654f95b09cd023a71fd5307041 ]
The DWC3_EP_RESOURCE_ALLOCATED flag ensures that the resource of an
endpoint is only assigned once. Unless the endpoint is reset, don't
clear this flag. Otherwise we may set endpoint resource again, which
prevents the driver from initiate transfer after handling a STALL or
endpoint halt to the control endpoint.
Commit f2e0eee47038 ("usb: dwc3: ep0: Don't reset resource alloc flag")
was fixing the initial issue, but did this only for physical ep1. Since
the function dwc3_ep0_stall_and_restart is resetting the flags for both
physical endpoints, this also has to be done for ep0.
Cc: stable@vger.kernel.org
Fixes: b311048c174d ("usb: dwc3: gadget: Rewrite endpoint allocation flow")
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20240814-dwc3hwep0reset-v2-1-29e1d7d923ea@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 5d2fb074dea2 ("usb: dwc3: ep0: Don't clear ep0 DWC3_EP_TRANSFER_STARTED")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b311048c174da893f47fc09439bc1f6fa2a29589 ]
The driver dwc3 deviates from the programming guide in regard to
endpoint configuration. It does this command sequence:
DEPSTARTCFG -> DEPXFERCFG -> DEPCFG
Instead of the suggested flow:
DEPSTARTCFG -> DEPCFG -> DEPXFERCFG
The reasons for this deviation were as follow, quoted:
1) The databook says to do %DWC3_DEPCMD_DEPSTARTCFG for every
%USB_REQ_SET_CONFIGURATION and %USB_REQ_SET_INTERFACE
(8.1.5). This is incorrect in the scenario of multiple
interfaces.
2) The databook does not mention doing more
%DWC3_DEPCMD_DEPXFERCFG for new endpoint on alt setting
(8.1.6).
Regarding 1), DEPSTARTCFG resets the endpoints' resource and can be a
problem if used with SET_INTERFACE request of a multiple interface
configuration. But we can still satisfy the programming guide
requirement by assigning the endpoint resource as part of
usb_ep_enable(). We will only reset endpoint resources on controller
initialization and SET_CONFIGURATION request.
Regarding 2), the later versions of the programming guide were updated
to clarify this flow (see "Alternate Initialization on SetInterface
Request" of the programming guide). As long as the platform has enough
physical endpoints, we can assign resource to a new endpoint.
The order of the command sequence will not be a problem to most
platforms for the current implementation of the dwc3 driver. However,
this order is required in different scenarios (such as initialization
during controller's hibernation restore). Let's keep the flow consistent
and follow the programming guide.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/c143583a5afb087deb8c3aa5eb227ee23515f272.1706754219.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 5d2fb074dea2 ("usb: dwc3: ep0: Don't clear ep0 DWC3_EP_TRANSFER_STARTED")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bcacc1c87acf9a8ebc17de18cb2b3cfeca547cf ]
Function pl011_throttle_rx() calls pl011_stop_rx() to disable RX, which
also disables the RX DMA by clearing the RXDMAE bit of the DMACR
register. However, to properly unthrottle RX when DMA is used, the
function pl011_unthrottle_rx() is expected to set the RXDMAE bit of
the DMACR register, which it currently lacks. This causes RX to stall
after the throttle API is called.
Set RXDMAE bit in the DMACR register while unthrottling RX if RX DMA is
used.
Fixes: 211565b100 ("serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle")
Cc: stable@vger.kernel.org
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241113092629.60226-1-kkartik@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68ca3e72d7463d79d29b6e4961d6028df2a88e25 ]
When a serial port is used for kernel console output, then all
modifications to the UART registers which are done from other contexts,
e.g. getty, termios, are interference points for the kernel console.
So far this has been ignored and the printk output is based on the
principle of hope. The rework of the console infrastructure which aims to
support threaded and atomic consoles, requires to mark sections which
modify the UART registers as unsafe. This allows the atomic write function
to make informed decisions and eventually to restore operational state. It
also allows to prevent the regular UART code from modifying UART registers
while printk output is in progress.
All modifications of UART registers are guarded by the UART port lock,
which provides an obvious synchronization point with the console
infrastructure.
To avoid adding this functionality to all UART drivers, wrap the
spin_[un]lock*() invocations for uart_port::lock into helper functions
which just contain the spin_[un]lock*() invocations for now. In a
subsequent step these helpers will gain the console synchronization
mechanisms.
Converted with coccinelle. No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20230914183831.587273-18-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 2bcacc1c87ac ("serial: amba-pl011: Fix RX stall when DMA is used")
Signed-off-by: Sasha Levin <sashal@kernel.org>
