[ Upstream commit 6fb5ff63b35b7e849cc8510957f25753f87f63d2 ]
According to the 1588 standard, it is possible to use both unicast and
multicast frames to send the PTP information. It was noticed that if the
frames were unicast they were not processed by the analyzer meaning that
they were not timestamped. Therefore fix this to match also these
unicast frames.
Fixes: ab2bf93393 ("net: phy: mscc: 1588 block initialization")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250726140307.3039694-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2da4def0f487f24bbb0cece3bb2bcdcb918a0b72 ]
Paolo spotted hangs in NIPA running driver tests against virtio.
The tests hang in virtnet_close() -> virtnet_napi_tx_disable().
The problem is only reproducible if running multiple of our tests
in sequence (I used TEST_PROGS="xdp.py ping.py netcons_basic.sh \
netpoll_basic.py stats.py"). Initial suspicion was that this is
a simple case of double-disable of NAPI, but instrumenting the
code reveals:
Deadlocked on NAPI ffff888007cd82c0 (virtnet_poll_tx):
state: 0x37, disabled: false, owner: 0, listed: false, weight: 64
The NAPI was not in fact disabled, owner is 0 (rather than -1),
so the NAPI "thinks" it's scheduled for CPU 0 but it's not listed
(!list_empty(&n->poll_list) => false). It seems odd that normal NAPI
processing would wedge itself like this.
Better suspicion is that netpoll gets enabled while NAPI is polling,
and also grabs the NAPI instance. This confuses napi_complete_done():
[netpoll] [normal NAPI]
napi_poll()
have = netpoll_poll_lock()
rcu_access_pointer(dev->npinfo)
return NULL # no netpoll
__napi_poll()
->poll(->weight)
poll_napi()
cmpxchg(->poll_owner, -1, cpu)
poll_one_napi()
set_bit(NAPI_STATE_NPSVC, ->state)
napi_complete_done()
if (NAPIF_STATE_NPSVC)
return false
# exit without clearing SCHED
This feels very unlikely, but perhaps virtio has some interactions
with the hypervisor in the NAPI ->poll that makes the race window
larger?
Best I could to to prove the theory was to add and trigger this
warning in napi_poll (just before netpoll_poll_unlock()):
WARN_ONCE(!have && rcu_access_pointer(n->dev->npinfo) &&
napi_is_scheduled(n) && list_empty(&n->poll_list),
"NAPI race with netpoll %px", n);
If this warning hits the next virtio_close() will hang.
This patch survived 30 test iterations without a hang (without it
the longest clean run was around 10). Credit for triggering this
goes to Breno's recent netconsole tests.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/c5a93ed1-9abe-4880-a3bb-8d1678018b1d@redhat.com
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20250726010846.1105875-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 948b1fe12005d39e2b49087b50e5ee55c9a8f76f ]
Commit a1fd37f97808 ("md: Don't wait for MD_RECOVERY_NEEDED for
HOT_REMOVE_DISK ioctl") introduced a regression in the md_cluster
module. (Failed cases 02r1_Manage_re-add & 02r10_Manage_re-add)
Consider a 2-node cluster:
- node1 set faulty & remove command on a disk.
- node2 must correctly update the array metadata.
Before a1fd37f97808, on node1, the delay between msg:METADATA_UPDATED
(triggered by faulty) and msg:REMOVE was sufficient for node2 to
reload the disk info (written by node1).
After a1fd37f97808, node1 no longer waits between faulty and remove,
causing it to send msg:REMOVE while node2 is still reloading disk info.
This often results in node2 failing to remove the faulty disk.
== how to trigger ==
set up a 2-node cluster (node1 & node2) with disks vdc & vdd.
on node1:
mdadm -CR /dev/md0 -l1 -b clustered -n2 /dev/vdc /dev/vdd --assume-clean
ssh node2-ip mdadm -A /dev/md0 /dev/vdc /dev/vdd
mdadm --manage /dev/md0 --fail /dev/vdc --remove /dev/vdc
check array status on both nodes with "mdadm -D /dev/md0".
node1 output:
Number Major Minor RaidDevice State
- 0 0 0 removed
1 254 48 1 active sync /dev/vdd
node2 output:
Number Major Minor RaidDevice State
- 0 0 0 removed
1 254 48 1 active sync /dev/vdd
0 254 32 - faulty /dev/vdc
Fixes: a1fd37f97808 ("md: Don't wait for MD_RECOVERY_NEEDED for HOT_REMOVE_DISK ioctl")
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Reviewed-by: Su Yue <glass.su@suse.com>
Link: https://lore.kernel.org/linux-raid/20250728042145.9989-1-heming.zhao@suse.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99765233ab42bf7a4950377ad7894dce8a5c0e60 ]
If the NFS client is doing writeback from a workqueue context, avoid using
__GFP_NORETRY for allocations if the task has set PF_MEMALLOC_NOIO or
PF_MEMALLOC_NOFS. The combination of these flags makes memory allocation
failures much more likely.
We've seen those allocation failures show up when the loopback driver is
doing writeback from a workqueue to a file on NFS, where memory allocation
failure results in errors or corruption within the loopback device's
filesystem.
Suggested-by: Trond Myklebust <trondmy@kernel.org>
Fixes: 0bae835b63 ("NFS: Avoid writeback threads getting stuck in mempool_alloc()")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/f83ac1155a4bc670f2663959a7a068571e06afd9.1752111622.git.bcodding@redhat.com
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9acb237deff7667b0f6b10fe6b1b70c4429ea049 ]
Currently, when the server supports NFS4.1 security labels then
security.selinux label in included twice. Instead, only add it
when the server doesn't possess security label support.
Fixes: 243fea134633 ("NFSv4.2: fix listxattr to return selinux security label")
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Link: https://lore.kernel.org/r/20250722205641.79394-1-okorniev@redhat.com
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef93a685e01a281b5e2a25ce4e3428cf9371a205 ]
The function needs to check the minimal filehandle length before it can
access the embedded filehandle.
Reported-by: zhangjian <zhangjian496@huawei.com>
Fixes: 20fa190272 ("nfs: add export operations")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52d633def56c10fe3e82a2c5d88c3ecb3f4e4852 ]
There are common patterns in the kernel of using test_and_clear_bit()
before wake_up_bit(), and atomic_dec_and_test() before wake_up_var().
These combinations don't need extra barriers but sometimes include them
unnecessarily.
To help avoid the unnecessary barriers and to help discourage the
general use of wake_up_bit/var (which is a fragile interface) introduce
two combined functions which implement these patterns.
Also add store_release_wake_up() which supports the task of simply
setting a non-atomic variable and sending a wakeup. This pattern
requires barriers which are often omitted.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240925053405.3960701-5-neilb@suse.de
Stable-dep-of: 1db3a48e83bb ("NFS: Fix wakeup of __nfs_lookup_revalidate() in unblock_revalidate()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f06bedfa62d57f7b67d44aacd6badad2e13a803f ]
When an applications get killed (SIGTERM/SIGINT) while pNFS client performs a connection
to DS, client ends in an infinite loop of connect-disconnect. This
source of the issue, it that flexfilelayoutdev#nfs4_ff_layout_prepare_ds gets an error
on nfs4_pnfs_ds_connect with status ERESTARTSYS, which is set by rpc_signal_task, but
the error is treated as transient, thus retried.
The issue is reproducible with Ctrl+C the following script(there should be ~1000 files in
a directory, client should must not have any connections to DSes):
```
echo 3 > /proc/sys/vm/drop_caches
for i in *
do
head -1 $i
done
```
The change aims to propagate the nfs4_ff_layout_prepare_ds error state
to the caller that can decide whatever this is a retryable error or not.
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Link: https://lore.kernel.org/r/20250627071751.189663-1-tigran.mkrtchyan@desy.de
Fixes: 260f32adb8 ("pNFS/flexfiles: Check the result of nfs4_pnfs_ds_connect")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2a2a6fc2469524caa713036297c542746d148dc ]
The existing PowerNV hotplug code did not handle surprise plug events
correctly, leading to a complete failure of the hotplug system after device
removal and a required reboot to detect new devices.
This comes down to two issues:
1) When a device is surprise removed, often the bridge upstream
port will cause a PE freeze on the PHB. If this freeze is not
cleared, the MSI interrupts from the bridge hotplug notification
logic will not be received by the kernel, stalling all plug events
on all slots associated with the PE.
2) When a device is removed from a slot, regardless of surprise or
programmatic removal, the associated PHB/PE ls left frozen.
If this freeze is not cleared via a fundamental reset, skiboot
is unable to clear the freeze and cannot retrain / rescan the
slot. This also requires a reboot to clear the freeze and redetect
the device in the slot.
Issue the appropriate unfreeze and rescan commands on hotplug events,
and don't oops on hotplug if pci_bus_to_OF_node() returns NULL.
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
[bhelgaas: tidy comments]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/171044224.1359864.1752615546988.JavaMail.zimbra@raptorengineeringinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1010b4c012b0d78dfb9d3132b49aa2ef024a07a7 ]
Multiple race conditions existed between the PCIe hotplug driver and the
EEH driver, leading to a variety of kernel oopses of the same general
nature:
<pcie device unplug>
<eeh driver trigger>
<hotplug removal trigger>
<pcie tree reconfiguration>
<eeh recovery next step>
<oops in EEH driver bus iteration loop>
A second class of oops is also seen when the underlying bus disappears
during device recovery.
Refactor the EEH module to be PCI rescan and remove safe. Also clean
up a few minor formatting / readability issues.
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/1334208367.1359861.1752615503144.JavaMail.zimbra@raptorengineeringinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80f9fc2362797538ebd4fd70a1dfa838cc2c2cdb ]
The Microsemi Switchtec PM8533 PFX 48xG3 [11f8:8533] PCIe switch system
was observed to incorrectly assert the Presence Detect Set bit in its
capabilities when tested on a Raptor Computing Systems Blackbird system,
resulting in the hot insert path never attempting a rescan of the bus
and any downstream devices not being re-detected.
Work around this by additionally checking whether the PCIe data link is
active or not when performing presence detection on downstream switches'
ports, similar to the pciehp_hpc.c driver.
Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/505981576.1359853.1752615415117.JavaMail.zimbra@raptorengineeringinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4668619092554e1b95c9a5ac2941ca47ba6d548a ]
When the root of a nested PCIe bridge configuration is unplugged, the
pnv_php driver leaked the allocated IRQ resources for the child bridges'
hotplug event notifications, resulting in a panic.
Fix this by walking all child buses and deallocating all its IRQ resources
before calling pci_hp_remove_devices().
Also modify the lifetime of the workqueue at struct pnv_php_slot::wq so
that it is only destroyed in pnv_php_free_slot(), instead of
pnv_php_disable_irq(). This is required since pnv_php_disable_irq() will
now be called by workers triggered by hot unplug interrupts, so the
workqueue needs to stay allocated.
The abridged kernel panic that occurs without this patch is as follows:
WARNING: CPU: 0 PID: 687 at kernel/irq/msi.c:292 msi_device_data_release+0x6c/0x9c
CPU: 0 UID: 0 PID: 687 Comm: bash Not tainted 6.14.0-rc5+ #2
Call Trace:
msi_device_data_release+0x34/0x9c (unreliable)
release_nodes+0x64/0x13c
devres_release_all+0xc0/0x140
device_del+0x2d4/0x46c
pci_destroy_dev+0x5c/0x194
pci_hp_remove_devices+0x90/0x128
pci_hp_remove_devices+0x44/0x128
pnv_php_disable_slot+0x54/0xd4
power_write_file+0xf8/0x18c
pci_slot_attr_store+0x40/0x5c
sysfs_kf_write+0x64/0x78
kernfs_fop_write_iter+0x1b0/0x290
vfs_write+0x3bc/0x50c
ksys_write+0x84/0x140
system_call_exception+0x124/0x230
system_call_vectored_common+0x15c/0x2ec
Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
[bhelgaas: tidy comments]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/2013845045.1359852.1752615367790.JavaMail.zimbra@raptorengineeringinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99b773d720aeea1ef2170dce5fcfa80649e26b78 ]
With the seqcount moved out of the group into a global psi_seq,
re-initializing the seqcount on group creation is causing seqcount
corruption.
Fixes: 570c8efd5eb7 ("sched/psi: Optimize psi_group_change() cpu_clock() usage")
Reported-by: Chris Mason <clm@meta.com>
Suggested-by: Beata Michalska <beata.michalska@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e48727c26c4d839ff9b4b73d1cae486bea7fe19 ]
Commit aa3998dbeb ("ata: libata-scsi: Disable scsi device
manage_system_start_stop") enabled libata EH to manage device power mode
trasitions for system suspend/resume and removed the flag from
ata_scsi_dev_config. However, since the sd_shutdown() function still
relies on the manage_system_start_stop flag, a spin-down command is not
issued to the disk with command "echo 1 > /sys/block/sdb/device/delete"
sd_shutdown() can be called for both system/runtime start stop
operations, so utilize the manage_run_time_start_stop flag set in the
ata_scsi_dev_config and issue a spin-down command during disk removal
when the system is running. This is in addition to when the system is
powering off and manage_shutdown flag is set. The
manage_system_start_stop flag will still be used for drivers that still
set the flag.
Fixes: aa3998dbeb ("ata: libata-scsi: Disable scsi device manage_system_start_stop")
Signed-off-by: Salomon Dushimirimana <salomondush@google.com>
Link: https://lore.kernel.org/r/20250724214520.112927-1-salomondush@google.com
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35dabf4503b94a697bababe94678a8bc989c3223 ]
If the h8 exit fails during runtime resume process, the runtime thread
enters runtime suspend immediately and the error handler operates at the
same time. It becomes stuck and cannot be recovered through the error
handler. To fix this, use link recovery instead of the error handler.
Fixes: 4db7a23605 ("scsi: ufs: Fix concurrency of error handler and other error recovery paths")
Signed-off-by: Seunghui Lee <sh043.lee@samsung.com>
Link: https://lore.kernel.org/r/20250717081213.6811-1-sh043.lee@samsung.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Acked-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7bdc68921481c19cd8c85ddf805a834211c19e61 ]
This reverts commit c577ab7ba5.
The invocation of iscsi_put_conn() in iscsi_iter_destory_conn_fn() is
used to free the initial reference counter of iscsi_cls_conn. For
non-qla4xxx cases, the ->destroy_conn() callback (e.g.,
iscsi_conn_teardown) will call iscsi_remove_conn() and iscsi_put_conn()
to remove the connection from the children list of session and free the
connection at last. However for qla4xxx, it is not the case. The
->destroy_conn() callback of qla4xxx will keep the connection in the
session conn_list and doesn't use iscsi_put_conn() to free the initial
reference counter. Therefore, it seems necessary to keep the
iscsi_put_conn() in the iscsi_iter_destroy_conn_fn(), otherwise, there
will be memory leak problem.
Link: https://lore.kernel.org/all/88334658-072b-4b90-a949-9c74ef93cfd1@huawei.com/
Fixes: c577ab7ba5 ("scsi: iscsi: Fix HW conn removal use after free")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Link: https://lore.kernel.org/r/20250715073926.3529456-1-lilingfeng3@huawei.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e908f58b6beb337cbe4481d52c3f5c78167b1aab ]
In the below noted Fixes commit we introduced a reflck mutex to allow
better scaling between devices for open and close. The reflck was
based on the hot reset granularity, device level for root bus devices
which cannot support hot reset or bus/slot reset otherwise. Overlooked
in this were SR-IOV VFs, where there's also no bus reset option, but
the default for a non-root-bus, non-slot-based device is bus level
reflck granularity.
The reflck mutex has since become the dev_set mutex (via commit
2cd8b14aaa ("vfio/pci: Move to the device set infrastructure")) and
is our defacto serialization for various operations and ioctls. It
still seems to be the case though that sets of vfio-pci devices really
only need serialization relative to hot resets affecting the entire
set, which is not relevant to SR-IOV VFs. As described in the Closes
link below, this serialization contributes to startup latency when
multiple VFs sharing the same "bus" are opened concurrently.
Mark the device itself as the basis of the dev_set for SR-IOV VFs.
Reported-by: Aaron Lewis <aaronlewis@google.com>
Closes: https://lore.kernel.org/all/20250626180424.632628-1-aaronlewis@google.com
Tested-by: Aaron Lewis <aaronlewis@google.com>
Fixes: e309df5b0c ("vfio/pci: Parallelize device open and release")
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20250626225623.1180952-1-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe24d5bc635e103a517ec201c3cb571eeab8be2f ]
When CONFIG_IOMMUFD is enabled and a device is bound to the pds_vfio_pci
driver, the following WARN_ON() trace is seen and probe fails:
WARNING: CPU: 0 PID: 5040 at drivers/vfio/vfio_main.c:317 __vfio_register_dev+0x130/0x140 [vfio]
<...>
pds_vfio_pci 0000:08:00.1: probe with driver pds_vfio_pci failed with error -22
This is because the driver's vfio_device_ops.detach_ioas isn't set.
Fix this by using the generic vfio_iommufd_physical_detach_ioas
function.
Fixes: 38fe3975b4 ("vfio/pds: Initial support for pds VFIO driver")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20250702163744.69767-1-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 982ddd59ed97dc7e63efd97ed50273ffb817bd41 ]
When vfio_df_close() is called with open_count=0, it triggers a warning in
vfio_assert_device_open() but still decrements open_count to -1. This allows
a subsequent open to incorrectly pass the open_count == 0 check, leading to
unintended behavior, such as setting df->access_granted = true.
For example, running an IOMMUFD compat no-IOMMU device with VFIO tests
(https://github.com/awilliam/tests/blob/master/vfio-noiommu-pci-device-open.c)
results in a warning and a failed VFIO_GROUP_GET_DEVICE_FD ioctl on the first
run, but the second run succeeds incorrectly.
Add checks to avoid decrementing open_count below zero.
Fixes: 05f37e1c03 ("vfio: Pass struct vfio_device_file * to vfio_device_open/close()")
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jacob Pan <jacob.pan@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250618234618.1910456-2-jacob.pan@linux.microsoft.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b25e271b377999191b12f0afbe1861edcf57e3fe ]
For devices with no-iommu enabled in IOMMUFD VFIO compat mode, the group open
path skips vfio_df_open(), leaving open_count at 0. This causes a warning in
vfio_assert_device_open(device) when vfio_df_close() is called during group
close.
The correct behavior is to skip only the IOMMUFD bind in the device open path
for no-iommu devices. Commit 6086efe734 omitted vfio_df_open(), which was
too broad. This patch restores the previous behavior, ensuring
the vfio_df_open is called in the group open path.
Fixes: 6086efe734 ("vfio-iommufd: Move noiommu compat validation out of vfio_iommufd_bind()")
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jacob Pan <jacob.pan@linux.microsoft.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20250618234618.1910456-1-jacob.pan@linux.microsoft.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1005a3ca28e90c7a64fa43023f866b960a60f791 ]
w/ "mode=lfs" mount option, generic/299 will cause system panic as below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/segment.c:2835!
Call Trace:
<TASK>
f2fs_allocate_data_block+0x6f4/0xc50
f2fs_map_blocks+0x970/0x1550
f2fs_iomap_begin+0xb2/0x1e0
iomap_iter+0x1d6/0x430
__iomap_dio_rw+0x208/0x9a0
f2fs_file_write_iter+0x6b3/0xfa0
aio_write+0x15d/0x2e0
io_submit_one+0x55e/0xab0
__x64_sys_io_submit+0xa5/0x230
do_syscall_64+0x84/0x2f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0010:new_curseg+0x70f/0x720
The root cause of we run out-of-space is: in f2fs_map_blocks(), f2fs may
trigger foreground gc only if it allocates any physical block, it will be
a little bit later when there is multiple threads writing data w/
aio/dio/bufio method in parallel, since we always use OPU in lfs mode, so
f2fs_map_blocks() does block allocations aggressively.
In order to fix this issue, let's give a chance to trigger foreground
gc in prior to block allocation in f2fs_map_blocks().
Fixes: 36abef4e79 ("f2fs: introduce mode=lfs mount option")
Cc: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e194e140ab7de2ce2782e64b9e086a43ca6ff4f2 ]
In lfs mode, dirty data needs OPU, we'd better calculate lower_p and
upper_p w/ them during has_not_enough_free_secs(), otherwise we may
encounter out-of-space issue due to we missed to reclaim enough
free section w/ foreground gc.
Fixes: 36abef4e79 ("f2fs: introduce mode=lfs mount option")
Cc: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5661998536af52848cc4d52a377e90368196edea ]
- touch /mnt/f2fs/012345678901234567890123456789012345678901234567890123
- truncate -s $((1024*1024*1024)) \
/mnt/f2fs/012345678901234567890123456789012345678901234567890123
- touch /mnt/f2fs/file
- truncate -s $((1024*1024*1024)) /mnt/f2fs/file
- mkfs.f2fs /mnt/f2fs/012345678901234567890123456789012345678901234567890123 \
-c /mnt/f2fs/file
- mount /mnt/f2fs/012345678901234567890123456789012345678901234567890123 \
/mnt/f2fs/loop
[16937.192225] F2FS-fs (loop0): Mount Device [ 0]: /mnt/f2fs/012345678901234567890123456789012345678901234567890123\xff\x01, 511, 0 - 3ffff
[16937.192268] F2FS-fs (loop0): Failed to find devices
If device path length equals to MAX_PATH_LEN, sbi->devs.path[] may
not end up w/ null character due to path array is fully filled, So
accidently, fields locate after path[] may be treated as part of
device path, result in parsing wrong device path.
struct f2fs_dev_info {
...
char path[MAX_PATH_LEN];
...
};
Let's add one byte space for sbi->devs.path[] to store null
character of device path string.
Fixes: 3c62be17d4 ("f2fs: support multiple devices")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81b6ecca2f15922e8d653dc037df5871e754be6e ]
We should use "{usr,grp,prj}jquota=" to disable journaled quota,
rather than using off{usr,grp,prj}jquota.
Fixes: 4b2414d04e ("f2fs: support journalled quota")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 154467f4ad033473e5c903a03e7b9bca7df9a0fa ]
KMSAN reported a use of uninitialized value in `__is_extent_mergeable()`
and `__is_back_mergeable()` via the read extent tree path.
The root cause is that `get_read_extent_info()` only initializes three
fields (`fofs`, `blk`, `len`) of `struct extent_info`, leaving the
remaining fields uninitialized. This leads to undefined behavior
when those fields are accessed later, especially during
extent merging.
Fix it by zero-initializing the `extent_info` struct before population.
Reported-by: syzbot+b8c1d60e95df65e827d4@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b8c1d60e95df65e827d4
Fixes: 94afd6d6e5 ("f2fs: extent cache: support unaligned extent")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Abinash Singh <abinashsinghlalotra@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b574acb3cf7591d2513a9f29f8c2021ad55fb881 ]
When rv3028_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Fixes: f583c341a5 ("rtc: rv3028: add clkout support")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-6-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 906726a5efeefe0ef0103ccff5312a09080c04ae ]
When pcf8563_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Fixes: a39a6405d5 ("rtc: pcf8563: add CLKOUT to common clock framework")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-5-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 186ae1869880e58bb3f142d222abdb35ecb4df0f ]
When pcf85063_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Fixes: 8c229ab604 ("rtc: pcf85063: Add pcf85063 clkout control to common clock framework")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-4-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 437c59e4b222cd697b4cf95995d933e7d583c5f1 ]
When nct3018y_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Fixes: 5adbaed16c ("rtc: Add NCT3018Y real time clock driver")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-3-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0a518eb0a692a2ab8357e844970660c5ea37720 ]
When hym8563_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Fixes: dcaf038493 ("rtc: add hym8563 rtc-driver")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-2-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf6eb547a24af7ad7bbd2abe9c5327f956bbeae8 ]
When ds3231_clk_sqw_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Fixes: 6c6ff145b3 ("rtc: ds1307: add clock provider support for DS3231")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-1-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8cd9193b62e92ad25def5370ca8ea2bc7585381 ]
The type of u argument of atomic_long_inc_below() should be long to avoid
unwanted truncation to int.
The patch fixes the wrong argument type of an internal function to
prevent unwanted argument truncation. It fixes an internal locking
primitive; it should not have any direct effect on userspace.
Mark said
: AFAICT there's no problem in practice because atomic_long_inc_below()
: is only used by inc_ucount(), and it looks like the value is
: constrained between 0 and INT_MAX.
:
: In inc_ucount() the limit value is taken from
: user_namespace::ucount_max[], and AFAICT that's only written by
: sysctls, to the table setup by setup_userns_sysctls(), where
: UCOUNT_ENTRY() limits the value between 0 and INT_MAX.
:
: This is certainly a cleanup, but there might be no functional issue in
: practice as above.
Link: https://lkml.kernel.org/r/20250721174610.28361-1-ubizjak@gmail.com
Fixes: f9c82a4ea8 ("Increase size of ucounts to atomic_long_t")
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Alexey Gladkov <legion@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: MengEn Sun <mengensun@tencent.com>
Cc: "Thomas Weißschuh" <linux@weissschuh.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bdc877ba6b7ff1b6d2ebeff11e63da4a50a54854 ]
The moduleparam code allows modules to provide their own definition of
MODULE_PARAM_PREFIX, instead of using the default KBUILD_MODNAME ".".
Commit 730b69d225 ("module: check kernel param length at compile time,
not runtime") added a check to ensure the prefix doesn't exceed
MODULE_NAME_LEN, as this is what param_sysfs_builtin() expects.
Later, commit 58f86cc89c ("VERIFY_OCTAL_PERMISSIONS: stricter checking
for sysfs perms.") removed this check, but there is no indication this was
intentional.
Since the check is still useful for param_sysfs_builtin() to function
properly, reintroduce it in __module_param_call(), but in a modernized form
using static_assert().
While here, clean up the __module_param_call() comments. In particular,
remove the comment "Default value instead of permissions?", which comes
from commit 9774a1f54f ("[PATCH] Compile-time check re world-writeable
module params"). This comment was related to the test variable
__param_perm_check_##name, which was removed in the previously mentioned
commit 58f86cc89c.
Fixes: 58f86cc89c ("VERIFY_OCTAL_PERMISSIONS: stricter checking for sysfs perms.")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250630143535.267745-4-petr.pavlu@suse.com
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a88db916b8c77552f49f7d9f8744095ea01a268f ]
Conflicting attachment resolution is based on the number of states
traversed to reach an accepting state in the attachment DFA, accounting
for DFA loops traversed during the matching process. However, the loop
counting logic had multiple bugs:
- The inc_wb_pos macro increments both position and length, but length
is supposed to saturate upon hitting buffer capacity, instead of
wrapping around.
- If no revisited state is found when traversing the history, is_loop
would still return true, as if there was a loop found the length of
the history buffer, instead of returning false and signalling that
no loop was found. As a result, the adjustment step of
aa_dfa_leftmatch would sometimes produce negative counts with loop-
free DFAs that traversed enough states.
- The iteration in the is_loop for loop is supposed to stop before
i = wb->len, so the conditional should be < instead of <=.
This patch fixes the above bugs as well as the following nits:
- The count and size fields in struct match_workbuf were not used,
so they can be removed.
- The history buffer in match_workbuf semantically stores aa_state_t
and not unsigned ints, even if aa_state_t is currently unsigned int.
- The local variables in is_loop are counters, and thus should be
unsigned ints instead of aa_state_t's.
Fixes: 21f6066105 ("apparmor: improve overlapping domain attachment resolution")
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Co-developed-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c055e62560b958354625604293652753d82bcae ]
WB_HISTORY_SIZE was defined to be a value not a power of 2, despite a
comment in the declaration of struct match_workbuf stating it is and a
modular arithmetic usage in the inc_wb_pos macro assuming that it is. Bump
WB_HISTORY_SIZE's value up to 32 and add a BUILD_BUG_ON_NOT_POWER_OF_2
line to ensure that any future changes to the value of WB_HISTORY_SIZE
respect this requirement.
Fixes: 136db99485 ("apparmor: increase left match history buffer size")
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69cd720a8a5e9ef0f05ce5dd8c9ea6e018245c82 ]
As part of the normal initiator side scanning the guest's scsi layer
will loop over all possible targets and send an inquiry. Since the
max number of targets for virtio-scsi is 256, this can result in 255
error messages about targets not existing if you only have a single
target. When there's more than 1 vhost-scsi device each with a single
target, then you get N * 255 log messages.
It looks like the log message was added by accident in:
commit 3f8ca2e115 ("vhost/scsi: Extract common handling code from
control queue handler")
when we added common helpers. Then in:
commit 09d7583294 ("vhost/scsi: Use common handling code in request
queue handler")
we converted the scsi command processing path to use the new
helpers so we started to see the extra log messages during scanning.
The patches were just making some code common but added the vq_err
call and I'm guessing the patch author forgot to enable the vq_err
call (vq_err is implemented by pr_debug which defaults to off). So
this patch removes the call since it's expected to hit this path
during device discovery.
Fixes: 09d7583294 ("vhost/scsi: Use common handling code in request queue handler")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20250611210113.10912-1-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b36f86dc47261828f96f826077131a35dd825fd ]
The DMA map functions can fail and should be tested for errors.
Fixes: 058e0e847d ("mtd: rawnand: rockchip: NFC driver for RK3308, RK2928 and others")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
