[ Upstream commit 23f1d8b47d125dcd8c1ec62a91164e6bc5d691d0 ]
The Z830 has some buttons that will only work properly as "quickstart"
buttons. To enable them in that mode, a value between 1 and 7 must be
used for HCI_HOTKEY_EVENT. Windows uses 0x5 on this laptop so use that for
maximum predictability and compatibility.
As there is not yet a known way of auto detection, this patch uses a DMI
quirk table. A module parameter is exposed to allow setting this on other
models for testing.
Signed-off-by: Arvid Norlander <lkml@vorpal.se>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240131111641.4418-3-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f30a3bea92bdab398531129d187629fb1d28f598 ]
[WHY]
PSP can access DCN registers during command submission and we need
to ensure that DCN is not in PG before doing so.
[HOW]
Add a callback to DM to lock and notify DC for idle optimization exit.
It can't be DC directly because of a potential race condition with the
link protection thread and the rest of DM operation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59d2f5b7392e988a391e6924e177c1a68d50223d ]
Adjusts the report descriptor for N-Key devices to
make the output count 0x01 which completely avoids
the need for a block of filtering.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd2c345a94cfa3873cc20db87387ee509c345c1b ]
This device sometimes doesn't send touch release signals when moving
from >=4 fingers to <4 fingers. Using MT_QUIRK_NOT_SEEN_MEANS_UP instead
of MT_QUIRK_ALWAYS_VALID makes sure that no touches become stuck.
MT_QUIRK_FORCE_MULTI_INPUT is not necessary for this device, but does no
harm.
Signed-off-by: Sean O'Brien <seobrien@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ecf0b2b8a37c8464186620bef37812a117ff6366 ]
During chip recovery (e.g. chip reset), there is a possible situation that
kernel worker reset_work is holding the lock and waiting for kernel thread
stat_worker to be parked, while stat_worker is waiting for the release of
the same lock.
It causes a deadlock resulting in the dumping of hung tasks messages and
possible rebooting of the device.
This patch prevents the execution of stat_worker during the chip recovery.
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Ming Yen Hsieh <MingYen.Hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2e6a872bde9912f1a7579639c5ca3adf1003916 ]
KCSAN detected a race condition in netpoll:
BUG: KCSAN: data-race in net_rx_action / netpoll_send_skb
write (marked) to 0xffff8881164168b0 of 4 bytes by interrupt on cpu 10:
net_rx_action (./include/linux/netpoll.h:90 net/core/dev.c:6712 net/core/dev.c:6822)
<snip>
read to 0xffff8881164168b0 of 4 bytes by task 1 on cpu 2:
netpoll_send_skb (net/core/netpoll.c:319 net/core/netpoll.c:345 net/core/netpoll.c:393)
netpoll_send_udp (net/core/netpoll.c:?)
<snip>
value changed: 0x0000000a -> 0xffffffff
This happens because netpoll_owner_active() needs to check if the
current CPU is the owner of the lock, touching napi->poll_owner
non atomically. The ->poll_owner field contains the current CPU holding
the lock.
Use an atomic read to check if the poll owner is the current CPU.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240429100437.3487432-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5edc6585aafefa3d44fb8a84adf241d90227f7a3 ]
This switch family supports four LEDs for each of its six ports. Each
LED group is composed of one of these four LEDs from all six ports. LED
groups can be configured to display hardware information, such as link
activity, or manually controlled through a bitmap in registers
RTL8366RB_LED_0_1_CTRL_REG and RTL8366RB_LED_2_3_CTRL_REG.
After a reset, the default LED group configuration for groups 0 to 3
indicates, respectively, link activity, link at 1000M, 100M, and 10M, or
RTL8366RB_LED_CTRL_REG as 0x5432. These configurations are commonly used
for LED indications. However, the driver was replacing that
configuration to use manually controlled LEDs (RTL8366RB_LED_FORCE)
without providing a way for the OS to control them. The default
configuration is deemed more useful than fixed, uncontrollable turned-on
LEDs.
The driver was enabling/disabling LEDs during port_enable/disable.
However, these events occur when the port is administratively controlled
(up or down) and are not related to link presence. Additionally, when a
port N was disabled, the driver was turning off all LEDs for group N,
not only the corresponding LED for port N in any of those 4 groups. In
such cases, if port 0 was brought down, the LEDs for all ports in LED
group 0 would be turned off. As another side effect, the driver was
wrongly warning that port 5 didn't have an LED ("no LED for port 5").
Since showing the administrative state of ports is not an orthodox way
to use LEDs, it was not worth it to fix it and all this code was
dropped.
The code to disable LEDs was simplified only changing each LED group to
the RTL8366RB_LED_OFF state. Registers RTL8366RB_LED_0_1_CTRL_REG and
RTL8366RB_LED_2_3_CTRL_REG are only used when the corresponding LED
group is configured with RTL8366RB_LED_FORCE and they don't need to be
cleaned. The code still references an LED controlled by
RTL8366RB_INTERRUPT_CONTROL_REG, but as of now, no test device has
actually used it. Also, some magic numbers were replaced by macros.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af0cb3fa3f9ed258d14abab0152e28a0f9593084 ]
Xiumei and Christoph reported the following lockdep splat, complaining of
the qdisc root lock being taken twice:
============================================
WARNING: possible recursive locking detected
6.7.0-rc3+ #598 Not tainted
--------------------------------------------
swapper/2/0 is trying to acquire lock:
ffff888177190110 (&sch->q.lock){+.-.}-{2:2}, at: __dev_queue_xmit+0x1560/0x2e70
but task is already holding lock:
ffff88811995a110 (&sch->q.lock){+.-.}-{2:2}, at: __dev_queue_xmit+0x1560/0x2e70
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&sch->q.lock);
lock(&sch->q.lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
5 locks held by swapper/2/0:
#0: ffff888135a09d98 ((&in_dev->mr_ifc_timer)){+.-.}-{0:0}, at: call_timer_fn+0x11a/0x510
#1: ffffffffaaee5260 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x2c0/0x1ed0
#2: ffffffffaaee5200 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x209/0x2e70
#3: ffff88811995a110 (&sch->q.lock){+.-.}-{2:2}, at: __dev_queue_xmit+0x1560/0x2e70
#4: ffffffffaaee5200 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x209/0x2e70
stack backtrace:
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 6.7.0-rc3+ #598
Hardware name: Red Hat KVM, BIOS 1.13.0-2.module+el8.3.0+7353+9de0a3cc 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0x4a/0x80
__lock_acquire+0xfdd/0x3150
lock_acquire+0x1ca/0x540
_raw_spin_lock+0x34/0x80
__dev_queue_xmit+0x1560/0x2e70
tcf_mirred_act+0x82e/0x1260 [act_mirred]
tcf_action_exec+0x161/0x480
tcf_classify+0x689/0x1170
prio_enqueue+0x316/0x660 [sch_prio]
dev_qdisc_enqueue+0x46/0x220
__dev_queue_xmit+0x1615/0x2e70
ip_finish_output2+0x1218/0x1ed0
__ip_finish_output+0x8b3/0x1350
ip_output+0x163/0x4e0
igmp_ifc_timer_expire+0x44b/0x930
call_timer_fn+0x1a2/0x510
run_timer_softirq+0x54d/0x11a0
__do_softirq+0x1b3/0x88f
irq_exit_rcu+0x18f/0x1e0
sysvec_apic_timer_interrupt+0x6f/0x90
</IRQ>
This happens when TC does a mirred egress redirect from the root qdisc of
device A to the root qdisc of device B. As long as these two locks aren't
protecting the same qdisc, they can be acquired in chain: add a per-qdisc
lockdep key to silence false warnings.
This dynamic key should safely replace the static key we have in sch_htb:
it was added to allow enqueueing to the device "direct qdisc" while still
holding the qdisc root lock.
v2: don't use static keys anymore in HTB direct qdiscs (thanks Eric Dumazet)
CC: Maxim Mikityanskiy <maxim@isovalent.com>
CC: Xiumei Mu <xmu@redhat.com>
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/451
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/7dc06d6158f72053cf877a82e2a7a5bd23692faa.1713448007.git.dcaratti@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1e197a665c2148ebc25fe09c53689e60afea195 ]
trace_drop_common() is called with preemption disabled, and it acquires
a spin_lock. This is problematic for RT kernels because spin_locks are
sleeping locks in this configuration, which causes the following splat:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 449, name: rcuc/47
preempt_count: 1, expected: 0
RCU nest depth: 2, expected: 2
5 locks held by rcuc/47/449:
#0: ff1100086ec30a60 ((softirq_ctrl.lock)){+.+.}-{2:2}, at: __local_bh_disable_ip+0x105/0x210
#1: ffffffffb394a280 (rcu_read_lock){....}-{1:2}, at: rt_spin_lock+0xbf/0x130
#2: ffffffffb394a280 (rcu_read_lock){....}-{1:2}, at: __local_bh_disable_ip+0x11c/0x210
#3: ffffffffb394a160 (rcu_callback){....}-{0:0}, at: rcu_do_batch+0x360/0xc70
#4: ff1100086ee07520 (&data->lock){+.+.}-{2:2}, at: trace_drop_common.constprop.0+0xb5/0x290
irq event stamp: 139909
hardirqs last enabled at (139908): [<ffffffffb1df2b33>] _raw_spin_unlock_irqrestore+0x63/0x80
hardirqs last disabled at (139909): [<ffffffffb19bd03d>] trace_drop_common.constprop.0+0x26d/0x290
softirqs last enabled at (139892): [<ffffffffb07a1083>] __local_bh_enable_ip+0x103/0x170
softirqs last disabled at (139898): [<ffffffffb0909b33>] rcu_cpu_kthread+0x93/0x1f0
Preemption disabled at:
[<ffffffffb1de786b>] rt_mutex_slowunlock+0xab/0x2e0
CPU: 47 PID: 449 Comm: rcuc/47 Not tainted 6.9.0-rc2-rt1+ #7
Hardware name: Dell Inc. PowerEdge R650/0Y2G81, BIOS 1.6.5 04/15/2022
Call Trace:
<TASK>
dump_stack_lvl+0x8c/0xd0
dump_stack+0x14/0x20
__might_resched+0x21e/0x2f0
rt_spin_lock+0x5e/0x130
? trace_drop_common.constprop.0+0xb5/0x290
? skb_queue_purge_reason.part.0+0x1bf/0x230
trace_drop_common.constprop.0+0xb5/0x290
? preempt_count_sub+0x1c/0xd0
? _raw_spin_unlock_irqrestore+0x4a/0x80
? __pfx_trace_drop_common.constprop.0+0x10/0x10
? rt_mutex_slowunlock+0x26a/0x2e0
? skb_queue_purge_reason.part.0+0x1bf/0x230
? __pfx_rt_mutex_slowunlock+0x10/0x10
? skb_queue_purge_reason.part.0+0x1bf/0x230
trace_kfree_skb_hit+0x15/0x20
trace_kfree_skb+0xe9/0x150
kfree_skb_reason+0x7b/0x110
skb_queue_purge_reason.part.0+0x1bf/0x230
? __pfx_skb_queue_purge_reason.part.0+0x10/0x10
? mark_lock.part.0+0x8a/0x520
...
trace_drop_common() also disables interrupts, but this is a minor issue
because we could easily replace it with a local_lock.
Replace the spin_lock with raw_spin_lock to avoid sleeping in atomic
context.
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Reported-by: Hu Chunyu <chuhu@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86d43e2bf93ccac88ef71cee36a23282ebd9e427 ]
Although the code is correct, the following line
copy_from_sockptr(&req_u.req, optval, len));
triggers this warning :
memcpy: detected field-spanning write (size 28) of single field "dst" at include/linux/sockptr.h:49 (size 16)
Refactor the code to be more explicit.
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61752ac69b69ed2e04444d090f6917c77ab36d42 ]
gcc-9 and some other older versions produce a false-positive warning
for zeroing two fields
In file included from include/linux/string.h:369,
from drivers/net/wireless/ath/ath9k/main.c:18:
In function 'fortify_memset_chk',
inlined from 'ath9k_ps_wakeup' at drivers/net/wireless/ath/ath9k/main.c:140:3:
include/linux/fortify-string.h:462:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
462 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Using a struct_group seems to reliably avoid the warning and
not make the code much uglier. The combined memset() should even
save a couple of cpu cycles.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240328135509.3755090-3-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14bb1e8c8d4ad5d9d2febb7d19c70a3cf536e1e5 ]
Recently, I frequently hit the following test failure:
[root@arch-fb-vm1 bpf]# ./test_progs -n 33/1
test_lookup_update:PASS:skel_open 0 nsec
[...]
test_lookup_update:PASS:sync_rcu 0 nsec
test_lookup_update:FAIL:map1_leak inner_map1 leaked!
#33/1 btf_map_in_map/lookup_update:FAIL
#33 btf_map_in_map:FAIL
In the test, after map is closed and then after two rcu grace periods,
it is assumed that map_id is not available to user space.
But the above assumption cannot be guaranteed. After zero or one
or two rcu grace periods in different siturations, the actual
freeing-map-work is put into a workqueue. Later on, when the work
is dequeued, the map will be actually freed.
See bpf_map_put() in kernel/bpf/syscall.c.
By using workqueue, there is no ganrantee that map will be actually
freed after a couple of rcu grace periods. This patch removed
such map leak detection and then the test can pass consistently.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240322061353.632136-1-yonghong.song@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f803bcf9208a2540acb4c32bdc3616673169f490 ]
In some systems, the netcat server can incur in delay to start listening.
When this happens, the test can randomly fail in various points.
This is an example error message:
# ip gre none gso
# encap 192.168.1.1 to 192.168.1.2, type gre, mac none len 2000
# test basic connectivity
# Ncat: Connection refused.
The issue stems from a race condition between the netcat client and server.
The test author had addressed this problem by implementing a sleep, which
I have removed in this patch.
This patch introduces a function capable of sleeping for up to two seconds.
However, it can terminate the waiting period early if the port is reported
to be listening.
Signed-off-by: Alessandro Carminati (Red Hat) <alessandro.carminati@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240314105911.213411-1-alessandro.carminati@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4ce0ab27646f4206a9eb502d6fe45cb080e1cae ]
kmemleak complains that there's a memory leak related to connect
handling:
unreferenced object 0xffff0001093bdf00 (size 128):
comm "iou-sqp-455", pid 457, jiffies 4294894164
hex dump (first 32 bytes):
02 00 fa ea 7f 00 00 01 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 2e481b1a):
[<00000000c0a26af4>] kmemleak_alloc+0x30/0x38
[<000000009c30bb45>] kmalloc_trace+0x228/0x358
[<000000009da9d39f>] __audit_sockaddr+0xd0/0x138
[<0000000089a93e34>] move_addr_to_kernel+0x1a0/0x1f8
[<000000000b4e80e6>] io_connect_prep+0x1ec/0x2d4
[<00000000abfbcd99>] io_submit_sqes+0x588/0x1e48
[<00000000e7c25e07>] io_sq_thread+0x8a4/0x10e4
[<00000000d999b491>] ret_from_fork+0x10/0x20
which can can happen if:
1) The command type does something on the prep side that triggers an
audit call.
2) The thread hasn't done any operations before this that triggered
an audit call inside ->issue(), where we have audit_uring_entry()
and audit_uring_exit().
Work around this by issuing a blanket NOP operation before the SQPOLL
does anything.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bba4250757b4ae1680fea435a358d8093f254094 ]
The AIV is one of the SEC resources. When releasing resources,
it need to release the AIV resources at the same time.
Otherwise, memory leakage occurs.
The aiv resource release is added to the sec resource release
function.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16637fea001ab3c8df528a8995b3211906165a30 ]
The member "uzonesize" of struct alauda_info will remain 0
if alauda_init_media() fails, potentially causing divide errors
in alauda_read_data() and alauda_write_lba().
- Add a member "media_initialized" to struct alauda_info.
- Change a condition in alauda_check_media() to ensure the
first initialization.
- Add an error check for the return value of alauda_init_media().
Fixes: e80b0fade0 ("[PATCH] USB Storage: add alauda support")
Reported-by: xingwei lee <xrivendell7@gmail.com>
Reported-by: yue sun <samsun1006219@gmail.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Shichao Lai <shichaorai@gmail.com>
Link: https://lore.kernel.org/r/20240526012745.2852061-1-shichaorai@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79d713baf63c8f23cc58b304c40be33d64a12aaf ]
In some APIs we would like to assign the special value to iotype
and compare against it in another places. Introduce UPIO_UNKNOWN
for this purpose.
Note, we can't use 0, because it's a valid value for IO port access.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240304123035.758700-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 87d80bfbd577 ("serial: 8250_dw: Don't use struct dw8250_data outside of 8250_dw")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22130dae05 ]
When there's no irq(this can be due to various reasons, for example,
no irq from HW support, or we just want to use poll solution, and so
on), falling back to poll is still better than no support at all.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20230806092056.2467-3-jszhang@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 87d80bfbd577 ("serial: 8250_dw: Don't use struct dw8250_data outside of 8250_dw")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5c9c5d7f26acc2c669c1dcf57d1bb43ee99220ce upstream.
In gb_interface_create, &intf->mode_switch_completion is bound with
gb_interface_mode_switch_work. Then it will be started by
gb_interface_request_mode_switch. Here is the relevant code.
if (!queue_work(system_long_wq, &intf->mode_switch_work)) {
...
}
If we call gb_interface_release to make cleanup, there may be an
unfinished work. This function will call kfree to free the object
"intf". However, if gb_interface_mode_switch_work is scheduled to
run after kfree, it may cause use-after-free error as
gb_interface_mode_switch_work will use the object "intf".
The possible execution flow that may lead to the issue is as follows:
CPU0 CPU1
| gb_interface_create
| gb_interface_request_mode_switch
gb_interface_release |
kfree(intf) (free) |
| gb_interface_mode_switch_work
| mutex_lock(&intf->mutex) (use)
Fix it by canceling the work before kfree.
Signed-off-by: Sicong Huang <congei42@163.com>
Link: https://lore.kernel.org/r/20240416080313.92306-1-congei42@163.com
Cc: Ronnie Sahlberg <rsahlberg@ciq.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd336649ba89789c845618dcbc09867010aec673 upstream.
The default device address apparently comes from the NVM configuration
file and can differ quite a bit between controllers.
Store the default address when parsing the configuration file and use it
to determine whether the controller has been provisioned with an
address.
This makes sure that devices without a unique address start as
unconfigured unless a valid address has been provided in the devicetree.
Fixes: 32868e126c78 ("Bluetooth: qca: fix invalid device address check")
Cc: stable@vger.kernel.org # 6.5
Cc: Doug Anderson <dianders@chromium.org>
Cc: Janaki Ramaiah Thota <quic_janathot@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 66c39332d02d65e311ec89b0051130bfcd00c9ac upstream.
Qualcomm Bluetooth controllers may not have been provisioned with a
valid device address and instead end up using the default address
00:00:00:00:5a:ad.
This address is now used to determine if a controller has a valid
address or if one needs to be provided through devicetree or by user
space before the controller can be used.
It turns out that the WCN3991 controllers used in Chromium Trogdor
machines use a different default address, 39:98:00:00:5a:ad, which also
needs to be marked as invalid so that the correct address is fetched
from the devicetree.
Qualcomm has unfortunately not yet provided any answers as to whether
the 39:98 encodes a hardware id and if there are other variants of the
default address that needs to be handled by the driver.
For now, add the Trogdor WCN3991 default address to the device address
check to avoid having these controllers start with the default address
instead of their assigned addresses.
Fixes: 32868e126c78 ("Bluetooth: qca: fix invalid device address check")
Cc: stable@vger.kernel.org # 6.5
Cc: Doug Anderson <dianders@chromium.org>
Cc: Janaki Ramaiah Thota <quic_janathot@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c3d6569a43322f371e7ba0ad386112723757ac8f upstream.
cachefiles_ondemand_init_object() as called from cachefiles_open_file() and
cachefiles_create_tmpfile() does not check if object->ondemand is set
before dereferencing it, leading to an oops something like:
RIP: 0010:cachefiles_ondemand_init_object+0x9/0x41
...
Call Trace:
<TASK>
cachefiles_open_file+0xc9/0x187
cachefiles_lookup_cookie+0x122/0x2be
fscache_cookie_state_machine+0xbe/0x32b
fscache_cookie_worker+0x1f/0x2d
process_one_work+0x136/0x208
process_scheduled_works+0x3a/0x41
worker_thread+0x1a2/0x1f6
kthread+0xca/0xd2
ret_from_fork+0x21/0x33
Fix this by making cachefiles_ondemand_init_object() return immediately if
cachefiles->ondemand is NULL.
Fixes: 3c5ecfe16e76 ("cachefiles: extract ondemand info field from cachefiles_object")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Gao Xiang <xiang@kernel.org>
cc: Chao Yu <chao@kernel.org>
cc: Yue Hu <huyue2@coolpad.com>
cc: Jeffle Xu <jefflexu@linux.alibaba.com>
cc: linux-erofs@lists.ozlabs.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1dc7242f6ee0c99852cb90676d7fe201cf5de422 upstream.
In case of errors during core start operation from sysfs, the driver
directly returns with the -EPERM error code. Fix this to ensure that
mailbox channels are freed on error before returning by jumping to the
'put_mbox' error handling label. Similarly, jump to the 'out' error
handling label to return with required -EPERM error code during the
core stop operation from sysfs.
Fixes: 3c8a9066d584 ("remoteproc: k3-r5: Do not allow core1 to power up before core0 via sysfs")
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240506141849.1735679-1-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 40eec1795cc27b076d49236649a29507c7ed8c2d upstream.
The creation of new subflows can fail for different reasons. If no
subflow have been created using the received ADD_ADDR, the related
counters should not be updated, otherwise they will never be decremented
for events related to this ID later on.
For the moment, the number of accepted ADD_ADDR is only decremented upon
the reception of a related RM_ADDR, and only if the remote address ID is
currently being used by at least one subflow. In other words, if no
subflow can be created with the received address, the counter will not
be decremented. In this case, it is then important not to increment
pm.add_addr_accepted counter, and not to modify pm.accept_addr bit.
Note that this patch does not modify the behaviour in case of failures
later on, e.g. if the MP Join is dropped or rejected.
The "remove invalid addresses" MP Join subtest has been modified to
validate this case. The broadcast IP address is added before the "valid"
address that will be used to successfully create a subflow, and the
limit is decreased by one: without this patch, it was not possible to
create the last subflow, because:
- the broadcast address would have been accepted even if it was not
usable: the creation of a subflow to this address results in an error,
- the limit of 2 accepted ADD_ADDR would have then been reached.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: YonglongLi <liyonglong@chinatelecom.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-3-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflicts in the selftests, in the same context, because the next line
with 'run_tests' has been updated later by a few commits like commit
e571fb09c8 ("selftests: mptcp: add speed env var"). We don't need to
touch this line, nor to backport the long refactoring series. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5208e7ced520a813b4f4774451fbac4e517e78b2 upstream.
The FIFO is 64 bytes, but the FCR is configured to fire the TX interrupt
when the FIFO is half empty (bit 3 = 0). Thus, we should only write 32
bytes when a TX interrupt occurs.
This fixes a problem observed on the PXA168 that dropped a bunch of TX
bytes during large transmissions.
Fixes: ab28f51c77 ("serial: rewrite pxa2xx-uart to use 8250_core")
Signed-off-by: Doug Brown <doug@schmorgal.com>
Link: https://lore.kernel.org/r/20240519191929.122202-1-doug@schmorgal.com
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 07c54cc5988f19c9642fd463c2dbdac7fc52f777 upstream.
After the recent commit 5097cbcb38e6 ("sched/isolation: Prevent boot crash
when the boot CPU is nohz_full") the kernel no longer crashes, but there is
another problem.
In this case tick_setup_device() calls tick_take_do_timer_from_boot() to
update tick_do_timer_cpu and this triggers the WARN_ON_ONCE(irqs_disabled)
in smp_call_function_single().
Kill tick_take_do_timer_from_boot() and just use WRITE_ONCE(), the new
comment explains why this is safe (thanks Thomas!).
Fixes: 08ae95f4fd ("nohz_full: Allow the boot CPU to be nohz_full")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240528122019.GA28794@redhat.com
Link: https://lore.kernel.org/all/20240522151742.GA10400@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a4ca369ca221bb7e06c725792ac107f0e48e82e7 upstream.
Destructive writes to a block device on which nilfs2 is mounted can cause
a kernel bug in the folio/page writeback start routine or writeback end
routine (__folio_start_writeback in the log below):
kernel BUG at mm/page-writeback.c:3070!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
...
RIP: 0010:__folio_start_writeback+0xbaa/0x10e0
Code: 25 ff 0f 00 00 0f 84 18 01 00 00 e8 40 ca c6 ff e9 17 f6 ff ff
e8 36 ca c6 ff 4c 89 f7 48 c7 c6 80 c0 12 84 e8 e7 b3 0f 00 90 <0f>
0b e8 1f ca c6 ff 4c 89 f7 48 c7 c6 a0 c6 12 84 e8 d0 b3 0f 00
...
Call Trace:
<TASK>
nilfs_segctor_do_construct+0x4654/0x69d0 [nilfs2]
nilfs_segctor_construct+0x181/0x6b0 [nilfs2]
nilfs_segctor_thread+0x548/0x11c0 [nilfs2]
kthread+0x2f0/0x390
ret_from_fork+0x4b/0x80
ret_from_fork_asm+0x1a/0x30
</TASK>
This is because when the log writer starts a writeback for segment summary
blocks or a super root block that use the backing device's page cache, it
does not wait for the ongoing folio/page writeback, resulting in an
inconsistent writeback state.
Fix this issue by waiting for ongoing writebacks when putting
folios/pages on the backing device into writeback state.
Link: https://lkml.kernel.org/r/20240530141556.4411-1-konishi.ryusuke@gmail.com
Fixes: 9ff05123e3 ("nilfs2: segment constructor")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0090d6e1b210551e63cf43958dc7a1ec942cdde9 upstream.
While loading a zone's info during creation of a block group, we can race
with a device replace operation and then trigger a use-after-free on the
device that was just replaced (source device of the replace operation).
This happens because at btrfs_load_zone_info() we extract a device from
the chunk map into a local variable and then use the device while not
under the protection of the device replace rwsem. So if there's a device
replace operation happening when we extract the device and that device
is the source of the replace operation, we will trigger a use-after-free
if before we finish using the device the replace operation finishes and
frees the device.
Fix this by enlarging the critical section under the protection of the
device replace rwsem so that all uses of the device are done inside the
critical section.
CC: stable@vger.kernel.org # 6.1.x: 15c12fcc50a1: btrfs: zoned: introduce a zone_info struct in btrfs_load_block_group_zone_info
CC: stable@vger.kernel.org # 6.1.x: 09a46725cc84: btrfs: zoned: factor out per-zone logic from btrfs_load_block_group_zone_info
CC: stable@vger.kernel.org # 6.1.x: 9e0e3e74dc69: btrfs: zoned: factor out single bg handling from btrfs_load_block_group_zone_info
CC: stable@vger.kernel.org # 6.1.x: 87463f7e0250: btrfs: zoned: factor out DUP bg handling from btrfs_load_block_group_zone_info
CC: stable@vger.kernel.org # 6.1.x
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 87463f7e0250d471fac41e7c9c45ae21d83b5f85 upstream.
Split the code handling a type DUP block group from
btrfs_load_block_group_zone_info to make the code more readable.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9e0e3e74dc6928a0956f4e27e24d473c65887e96 upstream.
Split the code handling a type single block group from
btrfs_load_block_group_zone_info to make the code more readable.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 09a46725cc84165af452d978a3532d6b97a28796 upstream.
Split out a helper for the body of the per-zone loop in
btrfs_load_block_group_zone_info to make the function easier to read and
modify.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 15c12fcc50a1b12a747f8b6ec05cdb18c537a4d1 upstream.
Add a new zone_info structure to hold per-zone information in
btrfs_load_block_group_zone_info and prepare for breaking out helpers
from it.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
