PD#174220:
After analyzing SPS, we found the value of sps_num_reorder_pics_0 is 0, it is an error value, which also caused the video play block.
Change-Id: I6e6d9bccf1284977f64fed9805fd329749fe020c
Signed-off-by: Peng Yixin <yixin.peng@amlogic.com>
PD#173030: vmh264: parse vui info max_dec_frame_buffering to
calc reorder_pic_num when bitstream_restriction_flag is enabled.
Change-Id: Ib14e54be3f5149cf4150ac63fe66d88171c14c2b
Signed-off-by: shihong.zheng <shihong.zheng@amlogic.com>
PD#170885
1. support the h264 decoding with multi-instance.
2. the reference count of clk mux has't clean was fixed.
3. replace capture worker to thread process.
4. optimize the machine status of the vcodec.
5. remover some locks unnecessary to promote efficiency.
6. the picture infos used to vda that was fixed.
Change-Id: I061ebdc088c8c7e14eab73032308715da5f4aafb
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
PD#172137:
the first I frame output when decoder statu is HEVC_DECPIC_DATA_DONE.
Change-Id: Ib6625b670268b8d9c251c05e261a137199677f6c
Signed-off-by: Peng Yixin <yixin.peng@amlogic.com>
mpeg12 fw tee load will be fail without name, must pass
a name.
Change-Id: I5bf12ce9158237687c93acc0c54d4c29460cecea
Signed-off-by: shihong.zheng <shihong.zheng@amlogic.com>
PD#170744: decoder:
1. fix mh264 mosaic when play mjpeg at sametime in frame mode;
2. sync the mjpeg multi play code;
3. add the mpeg2&mpeg4 multi play code;
4. force exit when load ucode fail;
5. set time out for vdec_disconnet wait_for_completion;
6. reset core when active vdec to disconnect list and before run;
7. fix some coverity error;
8. remove ucode load when mmu enable in vmh264 init.
Change-Id: Ic8f296526ddac5b3904a323ce2850b1d9178a284
Signed-off-by: shihong.zheng <shihong.zheng@amlogic.com>
PD#169710: vh265: output the correct sei information for dv
Change-Id: I60368cdfa04e76d4b5b5bad5c2c066a50a878431
Signed-off-by: zhilei.wu <zhilei.wu@amlogic.com>
PD#172077
the value of dynamic_buf_num_margin was not set before, it causes the allocation of memory fail when config 1G DDR, so modify the code to set its value in driver.
Change-Id: I86d1f1dac5936bad693f6643826ee35596fb0bac
Signed-off-by: Peng Yixin <yixin.peng@amlogic.com>
PD#172068
needs to use VIDEO_DEC_H263 on the firmware loading.
Change-Id: Ia55c47046a848bb300947e5f3b79a73ae2203c05
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
PD#167539
max_frame_num value exceeds the maximum value in the specification, and that cause block.
judge the validity of max_frame_num value to solve this issue.
Change-Id: Ic08e3f419e18d823cee4d0309b940dffa2058249
Signed-off-by: Peng Yixin <yixin.peng@amlogic.com>
PD#171042:
1. removed the way which used cpu type to choice fw.
2. removed redundant code.
ucode gitid
45b7330fd00f96d2e9859ac1ec91d1e46f70a1b2
Change-Id: Ie737701e682244223e437b2d6c5eb02420e10fbb
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
PD#170460:
vmh264: decoder get ip only flag from application and
enable ip only fast output in dpb.
Change-Id: I15a160c65bd0e23324a356c5f78957884395e8d2
Signed-off-by: Hui Zhang <hui.zhang@amlogic.com>
PD# 169831
1. if alloc bmmu idx fail, try free keep video
2. delete redundant code to set the connected status in vmjpeg_multi
Change-Id: I356be5cf530600c3b439b4beab6289eba98c9d1a
PD#170347: vh265:
for multi-instances application . double write will be set to 0x10
for memory saving , (double write only mode), it must run under non-mmu
mode. so add non-mmu ucode to support it.
ucode gerrit: 48398
Change-Id: I70d9c2186ceb03fb3eff28478548da571d265b4c
Signed-off-by: Hui Zhang <hui.zhang@amlogic.com>
PD#168978
gHevc will free when module remove, but h265_task process is not quit,
and will run before kthread_run again. add task break after stop.
Change-Id: I3bb88801eb093c29237bf410221f5067f923f08d
Signed-off-by: shihong.zheng <shihong.zheng@amlogic.com>
PD#167443:
1.fix allocate memory fail: add a judgment statement about the width and height of video.
2.add code to put mv buffer when already got mv buffer and allocation mmu memory failure.
Change-Id: I9934716cbe0157b02b5f64c6a53e73bb8e1d7fc2
Signed-off-by: Peng Yixin <yixin.peng@amlogic.com>
1.Delete redundant code to set the connected statu in mh264
2.add mutex, to fix core schedule statu is active but no decoder being scheduled, it cause all video cann't play.
Change-Id: Ica094d8068be78d36699749c5b32e8e3ad34d4ca
Signed-off-by: Peng Yixin <yixin.peng@amlogic.com>
PD#168480:media_module:
1: interface optimization for get cpu id
Change-Id: Ic5211341becf381347f89bc2a1d41c0482a847e8
Signed-off-by: Conglin Guo <conglin.guo@amlogic.com>
PD#169800: vmh264: change error_proc_policy for gts test
bit[12] = 1 : i_only when error happen.
old policy may discard many pictures when error happen,it will lead gst
test fail. So change this policy to disbaled to meet gst test
Change-Id: I02d64285e012ac26433884aba8764162171e3e97
Signed-off-by: Hui Zhang <hui.zhang@amlogic.com>
PD#168480:get cpu id ver from dts ,in stead of get_cpu_type interface
Change-Id: Ib96afad61995282c56716268db70149b27c3cd3d
Signed-off-by: Conglin Guo <conglin.guo@amlogic.com>
PD#169274: dv: merge rain dolby vision support bypass_el,
fix cache dirty problem patch from 3.14. related bug is 166832.
Change-Id: Idf07dd5d1c9fccd7ec8a1f11d5213f9ce2b0db43
Signed-off-by: shihong.zheng <shihong.zheng@amlogic.com>
