[ Upstream commit cf8c498694a443e28dc1222f3ab94677114a4724 ]
This reverts commit 340383c734f8 ("drm/amd/display: Remove pixle rate
limit for subvp")
[why]
The original commit causes a regression when subvp is applied
on ODM required 8k60hz timing. The display shows black screen
on boot. The issue can be recovered with hotplug. It also causes
MPO to fail. We will temprarily revert this commit and investigate
the root cause further.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit adbc49a5a8c6fcf7be154c2e30213bbf472940da ]
Previous patch modified the standard used by acpi_gpiochip_find()
to match device nodes. Using the device node set in gc->gpiodev->d-
ev instead of gc->parent.
However, there is a situation in gpio-dwapb where the GPIO device
driver will set gc->fwnode for each port corresponding to a child
node under a GPIO device, so gc->gpiodev->dev will be assigned the
value of each child node in gpiochip_add_data().
gpio-dwapb.c:
128,31 static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
struct dwapb_port_property *pp,
unsigned int offs);
port->gc.fwnode = pp->fwnode;
693,39 static int dwapb_gpio_probe;
err = dwapb_gpio_add_port(gpio, &pdata->properties[i], i);
When other drivers request GPIO pin resources through the GPIO device
node provided by ACPI (corresponding to the parent node), the change
of the matching object to gc->gpiodev->dev in acpi_gpiochip_find()
only allows finding the value of each port (child node), resulting
in a failed request.
Reapply the condition of using gc->parent for match in acpi_gpio-
chip_find() in the code can compatible with the problem of gpio-dwapb,
and will not affect the two cases mentioned in the patch:
1. There is no setting for gc->fwnode.
2. The case that depends on using gc->fwnode for match.
Fixes: 5062e4c14b ("gpiolib: acpi: use the fwnode in acpi_gpiochip_find()")
Fixes: 067dbc1ea5 ("gpiolib: acpi: Don't use GPIO chip fwnode in acpi_gpiochip_find()")
Signed-off-by: Devyn Liu <liudingyuan@huawei.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e7dec0b7926f3cd493c697c4c389df77e8e8a34c ]
It is nowhere used in the decompressor, therefore remove it.
Fixes: 17e89e1340 ("s390/facilities: move stfl information from lowcore to global data")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7faacaeaf6ce12fae78751de5ad869d8f1e1cd7a ]
Initialize the correct fields of the nvme dump block.
This bug had not been detected before because first, the fcp and nvme fields
of struct ipl_parameter_block are part of the same union and, therefore,
overlap in memory and second, they are identical in structure and size.
Fixes: d70e38cb1d ("s390: nvme dump support")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c922b73acaf39f867668d9cbe5dc69c23511f84 ]
Use correct symbolic constants IPL_BP_NVME_LEN and IPL_BP0_NVME_LEN
to initialize nvme reipl block when 'scp_data' sysfs attribute is
being updated. This bug had not been detected before because
the corresponding fcp and nvme symbolic constants are equal.
Fixes: 23a457b8d5 ("s390: nvme reipl")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 185445c7c137822ad856aae91a41e199370cb534 ]
By default user space is compiled with standard stack frame layout and not
with the packed stack layout. The vdso code however inherited the
-mpacked-stack compiler option from the kernel. Remove this option to make
sure the vdso is compiled with standard stack frame layout.
This makes sure that the stack frame backchain location for vdso generated
stack frames is the same like for calling code (if compiled with default
options). This allows to manually walk stack frames without DWARF
information, like the kernel is doing it e.g. with arch_stack_walk_user().
Fixes: 4bff8cb545 ("s390: convert to GENERIC_VDSO")
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc2f5f10f9bc5e58d38e9fda7dae107ac04a799f ]
Citing Andy Lutomirski from commit dda1e95cee ("x86/vdso: Create
.build-id links for unstripped vdso files"):
"With this change, doing 'make vdso_install' and telling gdb:
set debug-file-directory /lib/modules/KVER/vdso
will enable vdso debugging with symbols. This is useful for
testing, but kernel RPM builds will probably want to manually delete
these symlinks or otherwise do something sensible when they strip
the vdso/*.so files."
Fixes: 4bff8cb545 ("s390: convert to GENERIC_VDSO")
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56769ba4b297a629148eb24d554aef72d1ddfd9e ]
Currently, there is no standard implementation for vdso_install,
leading to various issues:
1. Code duplication
Many architectures duplicate similar code just for copying files
to the install destination.
Some architectures (arm, sparc, x86) create build-id symlinks,
introducing more code duplication.
2. Unintended updates of in-tree build artifacts
The vdso_install rule depends on the vdso files to install.
It may update in-tree build artifacts. This can be problematic,
as explained in commit 19514fc665 ("arm, kbuild: make
"make install" not depend on vmlinux").
3. Broken code in some architectures
Makefile code is often copied from one architecture to another
without proper adaptation.
'make vdso_install' for parisc does not work.
'make vdso_install' for s390 installs vdso64, but not vdso32.
To address these problems, this commit introduces a generic vdso_install
rule.
Architectures that support vdso_install need to define vdso-install-y
in arch/*/Makefile. vdso-install-y lists the files to install.
For example, arch/x86/Makefile looks like this:
vdso-install-$(CONFIG_X86_64) += arch/x86/entry/vdso/vdso64.so.dbg
vdso-install-$(CONFIG_X86_X32_ABI) += arch/x86/entry/vdso/vdsox32.so.dbg
vdso-install-$(CONFIG_X86_32) += arch/x86/entry/vdso/vdso32.so.dbg
vdso-install-$(CONFIG_IA32_EMULATION) += arch/x86/entry/vdso/vdso32.so.dbg
These files will be installed to $(MODLIB)/vdso/ with the .dbg suffix,
if exists, stripped away.
vdso-install-y can optionally take the second field after the colon
separator. This is needed because some architectures install a vdso
file as a different base name.
The following is a snippet from arch/arm64/Makefile.
vdso-install-$(CONFIG_COMPAT_VDSO) += arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so
This will rename vdso.so.dbg to vdso32.so during installation. If such
architectures change their implementation so that the base names match,
this workaround will go away.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sven Schnelle <svens@linux.ibm.com> # s390
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Guo Ren <guoren@kernel.org>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Stable-dep-of: fc2f5f10f9bc ("s390/vdso: Create .build-id links for unstripped vdso files")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10f70525365146046dddcc3d36bfaea2aee0376a ]
GDB fails to unwind vDSO functions with error message "PC not saved",
for instance when stepping through gettimeofday().
Add -fasynchronous-unwind-tables to CFLAGS to generate .eh_frame
DWARF unwind information for the vDSO C modules.
Fixes: 4bff8cb545 ("s390: convert to GENERIC_VDSO")
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8192a1b3807510d0ed5be1f8988c08f8d41cced9 ]
Gcc recently implemented an optimization [1] for loading symbols without
explicit alignment, aligning with the IBM Z ELF ABI. This ABI mandates
symbols to reside on a 2-byte boundary, enabling the use of the larl
instruction. However, kernel linker scripts may still generate unaligned
symbols. To address this, a new -munaligned-symbols option has been
introduced [2] in recent gcc versions.
[1] https://gcc.gnu.org/pipermail/gcc-patches/2023-June/622872.html
[2] https://gcc.gnu.org/pipermail/gcc-patches/2023-August/625986.html
However, when -munaligned-symbols is used in vdso code, it leads to the
following compilation error:
`.data.rel.ro.local' referenced in section `.text' of
arch/s390/kernel/vdso64/vdso64_generic.o: defined in discarded section
`.data.rel.ro.local' of arch/s390/kernel/vdso64/vdso64_generic.o
vdso linker script discards .data section to make it lightweight.
However, -munaligned-symbols in vdso object files references literal
pool and accesses _vdso_data. Hence, compile vdso code without
-munaligned-symbols. This means in the future, vdso code should deal
with alignment of newly introduced unaligned linker symbols.
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Link: https://lore.kernel.org/r/20240219132734.22881-2-sumanthk@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Stable-dep-of: 10f705253651 ("s390/vdso: Generate unwind information for C modules")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d6af2c76399f98444a5b4de96baf4b362d9f102b ]
With commit d3119bc985fb645 ("LoongArch: Fix callchain parse error with
kernel tracepoint events"), perf can parse kernel callchain, but not
complete and sometimes maybe error. The reason is LoongArch's unwinders
(guess, prologue and orc) don't really need fp (i.e., regs[22]), and
they use sp (i.e., regs[3]) as the frame address rather than the current
stack pointer.
Fix that by removing the assignment of regs[22], and instead assign the
__builtin_frame_address(0) to regs[3].
Without fix:
Children Self Command Shared Object Symbol
........ ........ ............. ................. ................
33.91% 33.91% swapper [kernel.vmlinux] [k] __schedule
|
|--33.04%--__schedule
|
--0.87%--__arch_cpu_idle
__schedule
With this fix:
Children Self Command Shared Object Symbol
........ ........ ............. ................. ................
31.16% 31.16% swapper [kernel.vmlinux] [k] __schedule
|
|--20.63%--smpboot_entry
| cpu_startup_entry
| schedule_idle
| __schedule
|
--10.53%--start_kernel
cpu_startup_entry
schedule_idle
__schedule
Fixes: d3119bc985fb645 ("LoongArch: Fix callchain parse error with kernel tracepoint events")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b6dd7a923281a7ccb980a0f768d6926721eb3cc ]
Perf event names aren't case sensitive. For sysfs events the entire
directory of events is read then iterated comparing names in a case
insensitive way, most often to see if an event is present.
Consider:
$ perf stat -e inst_retired.any true
The event inst_retired.any may be present in any PMU, so every PMU's
sysfs events are loaded and then searched with strcasecmp to see if
any match. This event is only present on the cpu PMU as a JSON event
so a lot of events were loaded from sysfs unnecessarily just to prove
an event didn't exist there.
This change avoids loading all the events by assuming sysfs event
names are always either lower or uppercase. It uses file exists and
only loads the events when the desired event is present.
For the example above, the number of openat calls measured by 'perf
trace' on a tigerlake laptop goes from 325 down to 255. The reduction
will be larger for machines with many PMUs, particularly replicated
uncore PMUs.
Ensure pmu_aliases_parse() is called before all uses of the aliases
list, but remove some "pmu->sysfs_aliases_loaded" tests as they are now
part of the function.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240502213507.2339733-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: d9c5f5f94c2d ("perf pmu: Count sys and cpuid JSON events separately")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67ee8e71daabb8632931b7559e5c8a4b69a427f8 ]
Add perf_pmu__name_from_config that does a reverse lookup from a
config number to an alias name. The lookup is expensive as the config
is computed for every alias by filling in a perf_event_attr, but this
is only done when verbose output is enabled. The lookup also only
considers config, and not config1, config2 or config3.
An example of the output:
$ perf stat -vv -e data_read true
...
perf_event_attr:
type 24 (uncore_imc_free_running_0)
size 136
config 0x20ff (data_read)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
...
Committer notes:
Fix the python binding build by adding dummies for not strictly
needed perf_pmu__name_from_config() and perf_pmus__find_by_type().
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20240308001915.4060155-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: d9c5f5f94c2d ("perf pmu: Count sys and cpuid JSON events separately")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7093882067e2e2f88d3449c35c5f0f3f566c8a26 ]
When dumping a perf_event_attr, use pmus to find the PMU and its name
by the type number. This allows dynamically added PMUs to be described.
Before:
$ perf stat -vv -e data_read true
...
perf_event_attr:
type 24
size 136
config 0x20ff
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
...
After:
$ perf stat -vv -e data_read true
...
perf_event_attr:
type 24 (uncore_imc_free_running_0)
size 136
config 0x20ff
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
...
However, it also means that when we have a PMU name we prefer it to a
hard coded name:
Before:
$ perf stat -vv -e faults true
...
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
config 0x2 (PERF_COUNT_SW_PAGE_FAULTS)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
enable_on_exec 1
exclude_guest 1
...
After:
$ perf stat -vv -e faults true
...
perf_event_attr:
type 1 (software)
size 136
config 0x2 (PERF_COUNT_SW_PAGE_FAULTS)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
enable_on_exec 1
exclude_guest 1
...
It feels more consistent to do this, rather than only prefer a PMU
name when a hard coded name isn't available.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20240308001915.4060155-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: d9c5f5f94c2d ("perf pmu: Count sys and cpuid JSON events separately")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d0f5f456a5786573ba6a3358178c8db580e4b85 ]
pmu__find_core_pmu() more logically belongs in pmus.c because it
iterates over all PMUs, so move it to pmus.c
At the same time rename it to perf_pmus__find_core_pmu() to match the
naming convention in this file.
list_prepare_entry() can't be used in perf_pmus__scan_core() anymore now
that it's called from the same compilation unit. This is with -O2
(specifically -O1 -ftree-vrp -finline-functions
-finline-small-functions) which allow the bounds of the array
access to be determined at compile time. list_prepare_entry() subtracts
the offset of the 'list' member in struct perf_pmu from &core_pmus,
which isn't a struct perf_pmu. The compiler sees that pmu results in
&core_pmus - 8 and refuses to compile. At runtime this works because
list_for_each_entry_continue() always adds the offset back again before
dereferencing ->next, but it's technically undefined behavior. With
-fsanitize=undefined an additional warning is generated.
Using list_first_entry_or_null() to get the first entry here avoids
doing &core_pmus - 8 but has the same result and fixes both the compile
warning and the undefined behavior warning. There are other uses of
list_prepare_entry() in pmus.c, but the compiler doesn't seem to be
able to see that they can also be called with &core_pmus, so I won't
change any at this time.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Haixin Yu <yuhaixin.yhx@linux.alibaba.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230913153355.138331-2-james.clark@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Stable-dep-of: d9c5f5f94c2d ("perf pmu: Count sys and cpuid JSON events separately")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 193a9e30207f54777ff42d0d8be8389edc522277 ]
On an Intel tigerlake laptop a metric like:
{
"BriefDescription": "Test",
"MetricExpr": "imc_free_running@data_read@ + imc_free_running@data_write@",
"MetricGroup": "Test",
"MetricName": "Test",
"ScaleUnit": "6.103515625e-5MiB"
},
Will have 4 events:
uncore_imc_free_running_0/data_read/
uncore_imc_free_running_0/data_write/
uncore_imc_free_running_1/data_read/
uncore_imc_free_running_1/data_write/
If aggregration is disabled with metric-only 2 column headers are
needed:
$ perf stat -M test --metric-only -A -a sleep 1
Performance counter stats for 'system wide':
MiB Test MiB Test
CPU0 1821.0 1820.5
But when not, the counts aggregated in the metric leader and only 1
column should be shown:
$ perf stat -M test --metric-only -a sleep 1
Performance counter stats for 'system wide':
MiB Test
5909.4
1.001258915 seconds time elapsed
Achieve this by skipping events that aren't metric leaders when
printing column headers and aggregation isn't disabled.
The bug is long standing, the fixes tag is set to a refactor as that
is as far back as is reasonable to backport.
Fixes: 088519f318 ("perf stat: Move the display functions to stat-display.c")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaige Ye <ye@kaige.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240510051309.2452468-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a798ff17cd2dabe47d5d4ed3d509631793c36e19 ]
During gc_data_segment(), if inode state is abnormal, it missed to call
iput(), fix it.
Fixes: b73e52824c ("f2fs: reposition unlock_new_inode to prevent accessing invalid inode")
Fixes: 9056d6489f ("f2fs: fix to do sanity check on inode type during garbage collection")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0fa4e57c1db263effd72d2149d4e21da0055c316 ]
It missed to call dec_valid_node_count() to release node block count
in error path, fix it.
Fixes: 141170b759 ("f2fs: fix to avoid use f2fs_bug_on() in f2fs_new_node_page()")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a4ed2d97cb6d044196cc3e726b6699222b41019 ]
It needs to cover {reserve,release}_compress_blocks() w/ cp_rwsem lock
to avoid racing with checkpoint, otherwise, filesystem metadata including
blkaddr in dnode, inode fields and .total_valid_block_count may be
corrupted after SPO case.
Fixes: ef8d563f18 ("f2fs: introduce F2FS_IOC_RELEASE_COMPRESS_BLOCKS")
Fixes: c75488fb4d ("f2fs: introduce F2FS_IOC_RESERVE_COMPRESS_BLOCKS")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 043c832371cd9023fbd725138ddc6c7f288dc469 ]
If inc_valid_block_count() can not allocate all requested blocks,
it needs to release block count in .total_valid_block_count and
resevation blocks in inode.
Fixes: 54607494875e ("f2fs: compress: fix to avoid inconsistence bewteen i_blocks and dnode")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f1c6ede6da9f7c5dd7380b74a64850298279168 ]
There are very similar codes in inc_valid_block_count() and
inc_valid_node_count() which is used for available user block
count calculation.
This patch introduces a new helper get_available_block_count()
to include those common codes, and used it to clean up codes.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: 043c832371cd ("f2fs: compress: fix error path of inc_valid_block_count()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 186e7d71534df4589405925caca5597af7626c12 ]
Previously, we account reserved blocks and compressed blocks into
@compr_blocks, then, f2fs_i_compr_blocks_update(,compr_blocks) will
update i_compr_blocks incorrectly, fix it.
Meanwhile, for the case all blocks in cluster were reserved, fix to
update dn->ofs_in_node correctly.
Fixes: eb8fbaa53374 ("f2fs: compress: fix to check unreleased compressed cluster")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25626e19ae6df34f336f235b6b3dbd1b566d2738 ]
The linked commit updated dso__load_vmlinux() to call
dso__set_long_name() before loading the symbols. Loading the symbols may
not succeed but dso__set_long_name() takes ownership of the string. The
two callers of this function free the string themselves on failure
cases, resulting in the following error:
$ perf record -- ls
$ perf report
free(): double free detected in tcache 2
Fix it by always taking ownership of the string, even on failure. This
means the string is either freed at the very first early exit condition,
or later when the dso is deleted or the long name is replaced. Now no
special return value is needed to signify that the caller needs to
free the string.
Fixes: e59fea47f8 ("perf symbols: Fix DSO kernel load and symbol process to correctly map DSO to its long_name, type and adjust_symbols")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240507141210.195939-5-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa4074e8fec4d2e686daee627fcafb3503efe365 ]
As for zoned-UFS, f2fs section size is forced to zone size. And zone
size may not aligned to pow2.
Fixes: 859fca6b70 ("f2fs: swap: support migrating swapfile in aligned write mode")
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Wu Bo <bo.wu@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9703d69d9d153bb230711d0d577454552aeb13d4 ]
Support file pinning with conventional storage area for zoned devices
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: aa4074e8fec4 ("f2fs: fix block migration when section is not aligned to pow2")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e0197f9932f70cc7be8744aa0ed4dd9b5d97d85 ]
No one uses this feature. Let's kill it.
Reviewed-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: aa4074e8fec4 ("f2fs: fix block migration when section is not aligned to pow2")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f0209f579d12bd0ea43a01a8696e30a8eeec1da ]
Make f2fs_gc_range() an extenal function to use it for GC for a range.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: aa4074e8fec4 ("f2fs: fix block migration when section is not aligned to pow2")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1c9d3f833ba60a288db111d7fe38edfeb9b8fbb ]
This patch supports using printk_ratelimited() in f2fs_printk(), and
wrap ratelimited f2fs_printk() into f2fs_{err,warn,info}_ratelimited(),
then, use these new helps to clean up codes.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: aa4074e8fec4 ("f2fs: fix block migration when section is not aligned to pow2")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37768434b7a7d00ac5a08b2c1d31aa7aaa0846a0 ]
Fix the following errors reported by checkpatch:
ERROR: spaces required around that ':' (ctx:VxW)
Signed-off-by: KaiLong Wang <wangkailong@jari.cn>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: aa4074e8fec4 ("f2fs: fix block migration when section is not aligned to pow2")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f24ba846133d0edec785ac6430d4daf6e9c93a09 ]
The "Downstream Port Containment related Enhancements" ECN of Jan 28, 2019
(document 12888 below), defined the EDR_PORT_DPC_ENABLE_DSM function with
Revision ID 5 with Arg3 being an integer. But when the ECN was integrated
into PCI Firmware r3.3, sec 4.6.12, it was defined as Revision ID 6 with
Arg3 being a package containing an integer.
The implementation in acpi_enable_dpc() supplies a package as Arg3 (arg4 in
the code), but it previously specified Revision ID 5. Align this with PCI
Firmware r3.3 by using Revision ID 6.
If firmware implemented per the ECN, its Revision 5 function would receive
a package as Arg3 when it expects an integer, so acpi_enable_dpc() would
likely fail. If such firmware exists and lacks a Revision 6 function that
expects a package, we may have to add support for Revision 5.
Link: https://lore.kernel.org/r/20240501022543.1626025-1-sathyanarayanan.kuppuswamy@linux.intel.com
Link: https://members.pcisig.com/wg/PCI-SIG/document/12888
Fixes: ac1c8e35a3 ("PCI/DPC: Add Error Disconnect Recover (EDR) support")
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
[bhelgaas: split into two patches, update commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Satish Thatchanamurthy <Satish.Thatchanamurt@Dell.com> # one platform
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1781d0a1458070d40134e4f3412ec9d70099bec ]
IRQ_DOMAIN is a hidden (not user visible) symbol. Users cannot set
it directly thru "make *config", so drivers should select it instead
of depending on it if they need it.
Relying on it being set for a dependency is risky.
Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.
Therefore, change EXTCON_MAX8997's use of "depends on" for
IRQ_DOMAIN to "select".
Link: https://lore.kernel.org/lkml/20240213060028.9744-1-rdunlap@infradead.org/
Fixes: dca1a71e41 ("extcon: Add support irq domain for MAX8997 muic")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
