[ Upstream commit 8048168df56e225c94e50b04cb7b0514135d7a1c ]
The extra "count >= limit" check in stmmac_rx_zc() is redundant and
has no effect because the value of "count" doesn't change after the
while condition at this point.
However, it can change after "read_again:" label:
while (count < limit) {
...
if (count >= limit)
break;
read_again:
...
/* XSK pool expects RX frame 1:1 mapped to XSK buffer */
if (likely(status & rx_not_ls)) {
xsk_buff_free(buf->xdp);
buf->xdp = NULL;
dirty++;
count++;
goto read_again;
}
...
This patch addresses the same issue previously resolved in stmmac_rx()
by commit fa02de9e7588 ("net: stmmac: fix rx budget limit check").
The fix is the same: move the check after the label to ensure that it
bounds the goto loop.
Fixes: bba2556efa ("net: stmmac: Enable RX via AF_XDP zero-copy")
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20251126104327.175590-1-aleksei.kodanev@bell-sw.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69894e5b4c5e28cda5f32af33d4a92b7a4b93b0e ]
Connlimit expression can be used for all kind of packets and not only
for packets with connection state new. See this ruleset as example:
table ip filter {
chain input {
type filter hook input priority filter; policy accept;
tcp dport 22 ct count over 4 counter
}
}
Currently, if the connection count goes over the limit the counter will
count the packets. When a connection is closed, the connection count
won't decrement as it should because it is only updated for new
connections due to an optimization on __nf_conncount_add() that prevents
updating the list if the connection is duplicated.
To solve this problem, check whether the connection was skipped and if
so, update the list. Adjust count_tree() too so the same fix is applied
for xt_connlimit.
Fixes: 976afca1ce ("netfilter: nf_conncount: Early exit in nf_conncount_lookup() and cleanup")
Closes: https://lore.kernel.org/netfilter/trinity-85c72a88-d762-46c3-be97-36f10e5d9796-1761173693813@3c-app-mailcom-bs12/
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be102eb6a0e7c03db00e50540622f4e43b2d2844 ]
When using nf_conncount infrastructure for non-confirmed connections a
duplicated track is possible due to an optimization introduced since
commit d265929930 ("netfilter: nf_conncount: reduce unnecessary GC").
In order to fix this introduce a new conncount API that receives
directly an sk_buff struct. It fetches the tuple and zone and the
corresponding ct from it. It comes with both existing conncount variants
nf_conncount_count_skb() and nf_conncount_add_skb(). In addition remove
the old API and adjust all the users to use the new one.
This way, for each sk_buff struct it is possible to check if there is a
ct present and already confirmed. If so, skip the add operation.
Fixes: d265929930 ("netfilter: nf_conncount: reduce unnecessary GC")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 634f3853cc98d73bdec8918010ee29b06981583e ]
Add a sanity check to skip path discovery if the maximum number of
encapsulation is reached. While at it, check for underflow too.
Fixes: 26267bf9bb ("netfilter: flowtable: bridge vlan hardware offload and switchdev")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6fb3acdebf65a72df0a95f9fd2c901ff2bc9a3a2 ]
Commit 97523a4edb ("kernel/resource: remove first_lvl / siblings_only
logic") removed an optimization introduced by commit 756398750e
("resource: avoid unnecessary lookups in find_next_iomem_res()"). That
was not called out in the message of the first commit explicitly so it's
not entirely clear whether removing the optimization happened
inadvertently or not.
As the original commit message of the optimization explains there is no
point considering the children of a subtree in find_next_iomem_res() if
the top level range does not match.
Reinstating the optimization results in performance improvements in
systems where /proc/iomem is ~5k lines long. Calling mmap() on /dev/mem
in such platforms takes 700-1500μs without the optimisation and 10-50μs
with the optimisation.
Note that even though commit 97523a4edb removed the 'sibling_only'
parameter from next_resource(), newer kernels have basically reinstated it
under the name 'skip_children'.
Link: https://lore.kernel.org/all/20251124165349.3377826-1-ilstam@amazon.com/T/#u
Fixes: 97523a4edb ("kernel/resource: remove first_lvl / siblings_only logic")
Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Andriy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: "Huang, Ying" <huang.ying.caritas@gmail.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0cc15a10c3b4ab14cd71b779fd5c9ca0cb2bc30d ]
regulator_supply_alias_list was accessed without any locking in
regulator_supply_alias(), regulator_register_supply_alias(), and
regulator_unregister_supply_alias(). Concurrent registration,
unregistration and lookups can race, leading to:
1 use-after-free if an alias entry is removed while being read,
2 duplicate entries when two threads register the same alias,
3 inconsistent alias mappings observed by consumers.
Protect all traversals, insertions and deletions on
regulator_supply_alias_list with the existing regulator_list_mutex.
Fixes: a06ccd9c37 ("regulator: core: Add ability to create a lookup alias for supply")
Signed-off-by: sparkhuang <huangshaobo3@xiaomi.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127025716.5440-1-huangshaobo3@xiaomi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ff147fdfa99b8cbb8c2833e685fde7c42580ae6 ]
Commit 8c3170628a9c ("wifi: brcmfmac: keep power during suspend if board
requires it") changed default behavior of the BRCMFMAC driver, which now
keeps SDIO card powered during system suspend to enable optional support
for WOWL. This feature is not supported by the legacy Exynos4 based
boards and leads to WLAN disfunction after system suspend/resume cycle.
Fix this by annotating SDIO host used by WLAN chip with
'cap-power-off-card' property, which should have been there from the
beginning.
Fixes: f77cbb9a3e ("ARM: dts: exynos: Add bcm4334 device node to Trats2")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20251126102618.3103517-5-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97cc9c346b2c9cde075b9420fc172137d2427711 ]
Commit 8c3170628a9c ("wifi: brcmfmac: keep power during suspend if board
requires it") changed default behavior of the BRCMFMAC driver, which now
keeps SDIO card powered during system suspend to enable optional support
for WOWL. This feature is not supported by the legacy Exynos4 based
boards and leads to WLAN disfunction after system suspend/resume cycle.
Fix this by annotating SDIO host used by WLAN chip with
'cap-power-off-card' property, which should have been there from the
beginning.
Fixes: a19f6efc01 ("ARM: dts: exynos: Enable WLAN support for the Trats board")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20251126102618.3103517-4-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 863d69923bdb6f414d0a3f504f1dfaeacbc00b09 ]
Commit 8c3170628a9c ("wifi: brcmfmac: keep power during suspend if board
requires it") changed default behavior of the BRCMFMAC driver, which now
keeps SDIO card powered during system suspend to enable optional support
for WOWL. This feature is not supported by the legacy Exynos4 based
boards and leads to WLAN disfunction after system suspend/resume cycle.
Fix this by annotating SDIO host used by WLAN chip with
'cap-power-off-card' property, which should have been there from the
beginning.
Fixes: 8620cc2f99 ("ARM: dts: exynos: Add devicetree file for the Galaxy S2")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20251126102618.3103517-3-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97aee67e2406ea381408915e606c5f86448f3949 ]
Commit 8c3170628a9c ("wifi: brcmfmac: keep power during suspend if board
requires it") changed default behavior of the BRCMFMAC driver, which now
keeps SDIO card powered during system suspend to enable optional support
for WOWL. This feature is not supported by the legacy Exynos4 based
boards and leads to WLAN disfunction after system suspend/resume cycle.
Fix this by annotating SDIO host used by WLAN chip with
'cap-power-off-card' property, which should have been there from the
beginning.
Fixes: f1b0ffaa68 ("ARM: dts: exynos: Enable WLAN support for the UniversalC210 board")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20251126102618.3103517-2-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 731ca4a4cc52fd5c5ae309edcfd2d7e54ece3321 ]
Use %pe instead of %ps when printing ERR_PTR() values. %ps is intended
for string pointers, while %pe correctly prints symbolic error names
for error pointers returned via ERR_PTR().
This shows the returned error value more clearly.
Fixes: 67f27b8b3a ("pds_vdpa: subscribe to the pds_core events")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20251018174705.1511982-1-alok.a.tiwari@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e40b6abe0b1247d43bc61942aa7534fca7209e44 ]
virtio_vdpa_set_status() is declared as returning void, but it used
"return vdpa_set_status()" Since vdpa_set_status() also returns
void, the return statement is unnecessary and misleading.
Remove it.
Fixes: c043b4a8cf ("virtio: introduce a vDPA based transport")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Message-Id: <20251001191653.1713923-1-alok.a.tiwari@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9ee3ff810f1cc0e253c9f2b17b668b973cb0e06 ]
When the MB_CHECK_ASSERT macro is enabled, we found that the
current validation logic in __mb_check_buddy has a gap in
detecting certain invalid buddy states, particularly related
to order-0 (bitmap) bits.
The original logic consists of three steps:
1. Validates higher-order buddies: if a higher-order bit is
set, at most one of the two corresponding lower-order bits
may be free; if a higher-order bit is clear, both lower-order
bits must be allocated (and their bitmap bits must be 0).
2. For any set bit in order-0, ensures all corresponding
higher-order bits are not free.
3. Verifies that all preallocated blocks (pa) in the group
have pa_pstart within bounds and their bitmap bits marked as
allocated.
However, this approach fails to properly validate cases where
order-0 bits are incorrectly cleared (0), allowing some invalid
configurations to pass:
corrupt integral
order 3 1 1
order 2 1 1 1 1
order 1 1 1 1 1 1 1 1 1
order 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Here we get two adjacent free blocks at order-0 with inconsistent
higher-order state, and the right one shows the correct scenario.
The root cause is insufficient validation of order-0 zero bits.
To fix this and improve completeness without significant performance
cost, we refine the logic:
1. Maintain the top-down higher-order validation, but we no longer
check the cases where the higher-order bit is 0, as this case will
be covered in step 2.
2. Enhance order-0 checking by examining pairs of bits:
- If either bit in a pair is set (1), all corresponding
higher-order bits must not be free.
- If both bits are clear (0), then exactly one of the
corresponding higher-order bits must be free
3. Keep the preallocation (pa) validation unchanged.
This change closes the validation gap, ensuring illegal buddy states
involving order-0 are correctly detected, while removing redundant
checks and maintaining efficiency.
Fixes: c9de560ded ("ext4: Add multi block allocator for ext4")
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Yongjian Sun <sunyongjian1@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251106060614.631382-3-sunyongjian@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6a45ee7607de3a350008630f4369b1b5ac80884 ]
ublk_ch_uring_cmd_local() may jump to the out label before
initialising the io pointer. This will cause trouble if DEBUG is
defined, because the pr_devel() call dereferences io. Clang reports:
drivers/block/ublk_drv.c:2403:6: error: variable 'io' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
2403 | if (tag >= ub->dev_info.queue_depth)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/block/ublk_drv.c:2492:32: note: uninitialized use occurs here
2492 | __func__, cmd_op, tag, ret, io->flags);
|
Fix this by initialising io to NULL and checking it before
dereferencing it.
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Fixes: 71f28f3136 ("ublk_drv: add io_uring based userspace block driver")
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 603f9be21c1894e462416e3324962d6c9c2b95f8 ]
In case of an error, ublk's ->uring_cmd() functions currently return
-EIOCBQUEUED and immediately call io_uring_cmd_done(). -EIOCBQUEUED and
io_uring_cmd_done() are intended for asynchronous completions. For
synchronous completions, the ->uring_cmd() function can just return the
negative return code directly. This skips io_uring_cmd_del_cancelable(),
and deferring the completion to task work. So return the error code
directly from __ublk_ch_uring_cmd() and ublk_ctrl_uring_cmd().
Update ublk_ch_uring_cmd_cb(), which currently ignores the return value
from __ublk_ch_uring_cmd(), to call io_uring_cmd_done() for synchronous
completions.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20250225212456.2902549-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: c6a45ee7607d ("ublk: prevent invalid access with DEBUG")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3421c7f68bba52281bbb38bc76c18dc03cb689e4 ]
In well-done ublk server implementation, ublk io command won't be
linked into any link chain. Meantime they are always handled in no-wait
style, so basically io cmd is always handled in submitter task context.
However, the server may set IOSQE_ASYNC, or io command is linked to one
chain mistakenly, then we may still run into io-wq context and
ctx->uring_lock isn't held.
So in case of IO_URING_F_UNLOCKED, schedule this command by
io_uring_cmd_complete_in_task to force running it in submitter task. Then
ublk_ch_uring_cmd_local() is guaranteed to run with context uring_lock held,
and we needn't to worry about sync among submission code path any more.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20231009093324.957829-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: c6a45ee7607d ("ublk: prevent invalid access with DEBUG")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17e7972979e147cc51d4a165e6b6b0f93273ca68 ]
On all AMD AM4 systems I have seen, e.g ASUS X470-i, Pro WS X570 Ace
and equivalent Gigabyte, amd-pstate does not initialize when the
x2apic is enabled in the BIOS. Kernel debug messages include:
[ 0.315438] acpi LNXCPU:00: Failed to get CPU physical ID.
[ 0.354756] ACPI CPPC: No CPC descriptor for CPU:0
[ 0.714951] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
I tracked this down to map_x2apic_id() checking device_declaration
passed in via the type argument of acpi_get_phys_id() via
map_madt_entry() while map_lapic_id() does not.
It appears these BIOSes use Processor statements for declaring the CPUs
in the ACPI namespace instead of processor device objects (which should
have been used). CPU declarations via Processor statements were
deprecated in ACPI 6.0 that was released 10 years ago. They should not
be used any more in any contemporary platform firmware.
I tried to contact Asus support multiple times, but never received a
reply nor did any BIOS update ever change this.
Fix amd-pstate w/ x2apic on am4 by allowing map_x2apic_id() to work with
CPUs declared via Processor statements for IDs less than 255, which is
consistent with ACPI 5.0 that still allowed Processor statements to be
used for declaring CPUs.
Fixes: 7237d3de78 ("x86, ACPI: add support for x2apic ACPI extensions")
Signed-off-by: René Rebe <rene@exactco.de>
[ rjw: Changelog edits ]
Link: https://patch.msgid.link/20251126.165513.1373131139292726554.rene@exactco.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f88425ef590b7fcc2324334b342e048edc144a9 ]
In sy7636a_sensor_probe(), regulator_enable() is called but if
devm_hwmon_device_register_with_info() fails, the function returns
without calling regulator_disable(), leaving the regulator enabled
and leaking the reference count.
Switch to devm_regulator_get_enable() to automatically
manage the regulator resource.
Fixes: de34a40532 ("hwmon: sy7636a: Add temperature driver for sy7636a")
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20251126162602.2086-1-vulab@iscas.ac.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a79482699b4d1e43948d14f0c7193dc1dcad858 ]
The .H_SYNC_POLARITY and .V_SYNC_POLARITY variables are 1 bit bitfields
of a u32. The ATOM_HSYNC_POLARITY define is 0x2 and the
ATOM_VSYNC_POLARITY is 0x4. When we do a bitwise negate of 0, 2, or 4
then the last bit is always 1 so this code always sets .H_SYNC_POLARITY
and .V_SYNC_POLARITY to true.
This code is instead intended to check if the ATOM_HSYNC_POLARITY or
ATOM_VSYNC_POLARITY flags are set and reverse the result. In other
words, it's supposed to be a logical negate instead of a bitwise negate.
Fixes: ae79c310b1 ("drm/amd/display: Add DCE12 bios parser support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73b97d46dde64fa184d47865d4a532d818c3a007 ]
memset_io() writes memory byte by byte with __raw_writeb() on the arm
platform if the size is word. but XCVR data RAM memory can't be accessed
with byte address, so with memset_io() the channel status control memory
is not really cleared, use writel_relaxed() instead.
Fixes: 2856448686 ("ASoC: fsl_xcvr: Add XCVR ASoC CPU DAI driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20251126064509.1900974-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 71d3bdae5eab21cf8991a6f3cd914caa31d5a51f ]
The HW disables bounds checking for MRs with a length of zero, so
the driver will only allow a zero length MR if the "all_memory"
flag is set, and this flag is only set if IB_PD_UNSAFE_GLOBAL_RKEY
is set for the PD.
This means that the "get_dma_mr" method will currently fail unless
the IB_PD_UNSAFE_GLOBAL_RKEY flag is set. This has not been an issue
because the "get_dma_mr" method is only ever invoked if the device
does not support the local DMA key or if IB_PD_UNSAFE_GLOBAL_RKEY
is set, and so far, all IRDMA HW supports the local DMA lkey.
However, some new HW does not support the local DMA lkey, so the
"get_dma_mr" method needs to work without IB_PD_UNSAFE_GLOBAL_RKEY
being set.
To support HW that does not allow the local DMA lkey, the logic has
been changed to pass an explicit flag to indicate when a dma_mr is
being created so that the zero length will be allowed.
Also, the "all_memory" flag has been forced to false for normal MR
allocation since these MRs are never supposed to provide global
unsafe rkey semantics anyway; only the MR created with "get_dma_mr"
should support this.
Fixes: bb6d73d9ad ("RDMA/irdma: Prevent zero-length STAG registration")
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Link: https://patch.msgid.link/20251125025350.180-7-tatyana.e.nikolova@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ac388db27c443dadfbb0b8b23fa7ccf429d901a ]
Add support for reregister MR verb API by doing a de-register
followed by a register MR with the new attributes. Reuse resources
like iwmr handle and HW stag where possible.
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20231004151306.228-1-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Stable-dep-of: 71d3bdae5eab ("RDMA/irdma: Do not directly rely on IB_PD_UNSAFE_GLOBAL_RKEY")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5583a55e074b33ccd88ac0542fd7cd656a7e2c8c ]
Some platforms (e.g. SC8280XP and X1E) support more than 128 stream
matching groups. This is more than what is defined as maximum by the ARM
SMMU architecture specification. Commit 1226113473 ("iommu/arm-smmu-qcom:
Limit the SMR groups to 128") disabled use of the additional groups because
they don't exhibit the same behavior as the architecture supported ones.
It seems like this is just another quirk of the hypervisor: When running
bare-metal without the hypervisor, the additional groups appear to behave
just like all others. The boot firmware uses some of the additional groups,
so ignoring them in this situation leads to stream match conflicts whenever
we allocate a new SMR group for the same SID.
The workaround exists primarily because the bypass quirk detection fails
when using a S2CR register from the additional matching groups, so let's
perform the test with the last reliable S2CR (127) and then limit the
number of SMR groups only if we detect that we are running below the
hypervisor (because of the bypass quirk).
Fixes: 1226113473 ("iommu/arm-smmu-qcom: Limit the SMR groups to 128")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d45db63260c6ae3cf007361e04a1c41bd265084 ]
Add a missing struct short description and a missing leading " *" to
lp855x.h to avoid kernel-doc warnings:
Warning: include/linux/platform_data/lp855x.h:126 missing initial short
description on line:
* struct lp855x_platform_data
Warning: include/linux/platform_data/lp855x.h:131 bad line:
Only valid when mode is PWM_BASED.
Fixes: 7be865ab86 ("backlight: new backlight driver for LP855x devices")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20251111060916.1995920-1-rdunlap@infradead.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9341d6698f4cfdfc374fb6944158d111ebe16a9d ]
LED Backlight is a consumer of one or multiple LED class devices, but
devlink is currently unable to create correct supplier-producer links when
the supplier is a class device. It creates instead a link where the
supplier is the parent of the expected device.
One consequence is that removal order is not correctly enforced.
Issues happen for example with the following sections in a device tree
overlay:
// An LED driver chip
pca9632@62 {
compatible = "nxp,pca9632";
reg = <0x62>;
// ...
addon_led_pwm: led-pwm@3 {
reg = <3>;
label = "addon:led:pwm";
};
};
backlight-addon {
compatible = "led-backlight";
leds = <&addon_led_pwm>;
brightness-levels = <255>;
default-brightness-level = <255>;
};
In this example, the devlink should be created between the backlight-addon
(consumer) and the pca9632@62 (supplier). Instead it is created between the
backlight-addon (consumer) and the parent of the pca9632@62, which is
typically the I2C bus adapter.
On removal of the above overlay, the LED driver can be removed before the
backlight device, resulting in:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
...
Call trace:
led_put+0xe0/0x140
devm_led_release+0x6c/0x98
Another way to reproduce the bug without any device tree overlays is
unbinding the LED class device (pca9632@62) before unbinding the consumer
(backlight-addon):
echo 11-0062 >/sys/bus/i2c/drivers/leds-pca963x/unbind
echo ...backlight-dock >/sys/bus/platform/drivers/led-backlight/unbind
Fix by adding a devlink between the consuming led-backlight device and the
supplying LED device, as other drivers and subsystems do as well.
Fixes: ae232e45ac ("backlight: add led-backlight driver")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://patch.msgid.link/20250519-led-backlight-add-devlink-to-supplier-class-device-v6-1-845224aeb2ce@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ddb4873286e03e193c5a3bebb5fc6fa820e9ee3a ]
At least zonefs expects error completions to be able to sleep. Because
error completions aren't performance critical, just defer them to workqueue
context unconditionally.
Fixes: 8dcc1a9d90 ("fs: New zonefs file system")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251113170633.1453259-3-hch@lst.de
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae2f33a519af3730cacd1c787ebe1f7475df5ba8 ]
Split out the struct iomap-dio level final completion from
iomap_dio_bio_end_io into a helper to clean up the code and make it
reusable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250206064035.2323428-7-hch@lst.de
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: ddb4873286e0 ("iomap: always run error completions in user context")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 04d98b3452331fa53ec3b698b66273af6ef73288 ]
The flush page DMA address is stored in a special register that is not
associated with the GPU's standard DMA range. For example, on Turing,
the GPU's MMU can handle 47-bit addresses, but the flush page address
register is limited to 40 bits.
At the point during device initialization when the flush page is
allocated, the DMA mask is still at its default of 32 bits. So even
though it's unlikely that the flush page could exist above a 40-bit
address, the dma_map_page() call could fail, e.g. if IOMMU is disabled
and the address is above 32 bits. The simplest way to achieve all
constraints is to allocate the page in the DMA32 zone. Since the flush
page is literally just a page, this is an acceptable limitation. The
alternative is to temporarily set the DMA mask to 40 (or 52 for Hopper
and later) bits, but that could have unforseen side effects.
In situations where the flush page is allocated above 32 bits and IOMMU
is disabled, you will get an error like this:
nouveau 0000:65:00.0: DMA addr 0x0000000107c56000+4096 overflow (mask ffffffff, bus limit 0).
Fixes: 5728d06419 ("drm/nouveau/fb: handle sysmem flush page from common code")
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20251113230323.1271726-1-ttabi@nvidia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e7dd1182fcedee7c6097c9f49eba8de94a4364e3 ]
If the call to btrfs_del_leaf() fails we return without decrementing the
extra ref we took on the leaf, therefore leaking it. Fix this by ensuring
we drop the ref count before returning the error.
Fixes: 751a27615d ("btrfs: do not BUG_ON() on tree mod log failures at btrfs_del_ptr()")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53d1548612670aa8b5d89745116cc33d9d172863 ]
In mt7615_mcu_wtbl_sta_add(), an skb sskb is allocated. If the
subsequent call to mt76_connac_mcu_alloc_wtbl_req() fails, the function
returns an error without freeing sskb, leading to a memory leak.
Fix this by calling dev_kfree_skb() on sskb in the error handling path
to ensure it is properly released.
Fixes: 99c457d902 ("mt76: mt7615: move mt7615_mcu_set_bmc to mt7615_mcu_ops")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251113062415.103611-1-zilin@seu.edu.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 974555d6e417974e63444266e495a06d06c23af5 ]
When executing HLV* instructions at the HS mode, a guest page fault
may occur when a g-stage page table migration between triggering the
virtual instruction exception and executing the HLV* instruction.
This may be a corner case, and one simpler way to handle this is to
re-execute the instruction where the virtual instruction exception
occurred, and the guest page fault will be automatically handled.
Fixes: b91f0e4cb8 ("RISC-V: KVM: Factor-out instruction emulation into separate sources")
Signed-off-by: Fangyu Yu <fangyu.yu@linux.alibaba.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20251121133543.46822-1-fangyu.yu@linux.alibaba.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8700ce07c5c6bf27afa7b59a8d9cf58d783a7d5c ]
Fix error handling in cc_map_hash_request_update where sg_nents_for_len
return value was assigned to u32, converting negative errors to large
positive values before passing to sg_copy_to_buffer.
Check sg_nents_for_len return value and propagate errors before
assigning to areq_ctx->in_nents.
Fixes: b7ec853068 ("crypto: ccree - use std api when possible")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9eb52037a529fbb307c290e9951a62dd728b03d ]
The return value of sg_nents_for_len was assigned to an unsigned long
in starfive_hash_digest, causing negative error codes to be converted
to large positive integers.
Add error checking for sg_nents_for_len and return immediately on
failure to prevent potential buffer overflows.
Fixes: 7883d1b28a ("crypto: starfive - Add hash and HMAC support")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae24fc8a16b0481ea8c5acbc66453c49ec0431c4 ]
Currently, test_perf_branches_no_hw() relies on the busy loop within
test_perf_branches_common() being slow enough to allow at least one
perf event sample tick to occur before starting to tear down the
backing perf event BPF program. With a relatively small fixed
iteration count of 1,000,000, this is not guaranteed on modern fast
CPUs, resulting in the test run to subsequently fail with the
following:
bpf_testmod.ko is already unloaded.
Loading bpf_testmod.ko...
Successfully loaded bpf_testmod.ko.
test_perf_branches_common:PASS:test_perf_branches_load 0 nsec
test_perf_branches_common:PASS:attach_perf_event 0 nsec
test_perf_branches_common:PASS:set_affinity 0 nsec
check_good_sample:PASS:output not valid 0 nsec
check_good_sample:PASS:read_branches_size 0 nsec
check_good_sample:PASS:read_branches_stack 0 nsec
check_good_sample:PASS:read_branches_stack 0 nsec
check_good_sample:PASS:read_branches_global 0 nsec
check_good_sample:PASS:read_branches_global 0 nsec
check_good_sample:PASS:read_branches_size 0 nsec
test_perf_branches_no_hw:PASS:perf_event_open 0 nsec
test_perf_branches_common:PASS:test_perf_branches_load 0 nsec
test_perf_branches_common:PASS:attach_perf_event 0 nsec
test_perf_branches_common:PASS:set_affinity 0 nsec
check_bad_sample:FAIL:output not valid no valid sample from prog
Summary: 0/1 PASSED, 0 SKIPPED, 1 FAILED
Successfully unloaded bpf_testmod.ko.
On a modern CPU (i.e. one with a 3.5 GHz clock rate), executing 1
million increments of a volatile integer can take significantly less
than 1 millisecond. If the spin loop and detachment of the perf event
BPF program elapses before the first 1 ms sampling interval elapses,
the perf event will never end up firing. Fix this by bumping the loop
iteration counter a little within test_perf_branches_common(), along
with ensuring adding another loop termination condition which is
directly influenced by the backing perf event BPF program
executing. Notably, a concious decision was made to not adjust the
sample_freq value as that is just not a reliable way to go about
fixing the problem. It effectively still leaves the race window open.
Fixes: 67306f84ca ("selftests/bpf: Add bpf_read_branch_records() selftest")
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251119143540.2911424-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27746aaf1b20172f0859546c4a3e82eca459f680 ]
Gracefully skip the test_perf_branches_hw subtest on platforms that
do not support LBR or require specialized perf event attributes
to enable branch sampling.
For example, AMD's Milan (Zen 3) supports BRS rather than traditional
LBR. This requires specific configurations (attr.type = PERF_TYPE_RAW,
attr.config = RETIRED_TAKEN_BRANCH_INSTRUCTIONS) that differ from the
generic setup used within this test. Notably, it also probably doesn't
hold much value to special case perf event configurations for selected
micro architectures.
Fixes: 67306f84ca ("selftests/bpf: Add bpf_read_branch_records() selftest")
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20251120142059.2836181-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
