[ Upstream commit 3bcbc20942 ]
To allow running rseq and KVM's rseq selftests as statically linked
binaries, initialize the various "trampoline" pointers to point directly
at the expect glibc symbols, and skip the dlysm() lookups if the rseq
size is non-zero, i.e. the binary is statically linked *and* the libc
registered its own rseq.
Define weak versions of the symbols so as not to break linking against
libc versions that don't support rseq in any capacity.
The KVM selftests in particular are often statically linked so that they
can be run on targets with very limited runtime environments, i.e. test
machines.
Fixes: 233e667e1a ("selftests/rseq: Uplift rseq selftests for compatibility with glibc-2.35")
Cc: Aaron Lewis <aaronlewis@google.com>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230721223352.2333911-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1a997ba4c ]
When checking for libc rseq support in the library constructor, don't
only depend on the symbols presence, check that the registration was
completed.
This targets a scenario where the libc has rseq support but it is not
wired for the current architecture in 'bits/rseq.h', we want to fallback
to our internal registration mechanism.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/r/20220614154830.1367382-4-mjeanson@efficios.com
Stable-dep-of: 3bcbc20942 ("selftests/rseq: Play nice with binaries statically linked against glibc 2.35+")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c541dce86c upstream.
The reconfigure / remount code takes a lot of effort to protect
filesystem's reconfiguration code from racing writes on remounting
read-only. However during remounting read-only filesystem to read-write
mode userspace writes can start immediately once we clear SB_RDONLY
flag. This is inconvenient for example for ext4 because we need to do
some writes to the filesystem (such as preparation of quota files)
before we can take userspace writes so we are clearing SB_RDONLY flag
before we are fully ready to accept userpace writes and syzbot has found
a way to exploit this [1]. Also as far as I'm reading the code
the filesystem remount code was protected from racing writes in the
legacy mount path by the mount's MNT_READONLY flag so this is relatively
new problem. It is actually fairly easy to protect remount read-write
from racing writes using sb->s_readonly_remount flag so let's just do
that instead of having to workaround these races in the filesystem code.
[1] https://lore.kernel.org/all/00000000000006a0df05f6667499@google.com/T/
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230615113848.8439-1-jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 495fcec864 upstream.
If you drop into kdb and type "ftdump" you'll get a sleeping while
atomic warning from memory allocation in trace_find_next_entry().
This appears to have been caused by commit ff895103a8 ("tracing:
Save off entry when peeking at next entry"), which added the
allocation in that path. The problematic commit was already fixed by
commit 8e99cf91b9 ("tracing: Do not allocate buffer in
trace_find_next_entry() in atomic") but that fix missed the kdb case.
The fix here is easy: just move the assignment of the static buffer to
the place where it should have been to begin with:
trace_init_global_iter(). That function is called in two places, once
is right before the assignment of the static buffer added by the
previous fix and once is in kdb.
Note that it appears that there's a second static buffer that we need
to assign that was added in commit efbbdaa22b ("tracing: Show real
address for trace event arguments"), so we'll move that too.
Link: https://lkml.kernel.org/r/20220708170919.1.I75844e5038d9425add2ad853a608cb44bb39df40@changeid
Fixes: ff895103a8 ("tracing: Save off entry when peeking at next entry")
Fixes: efbbdaa22b ("tracing: Show real address for trace event arguments")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 797964253d upstream.
In commit 20ea1e7d13 ("file: always lock position for
FMODE_ATOMIC_POS") we ended up always taking the file pos lock, because
pidfd_getfd() could get a reference to the file even when it didn't have
an elevated file count due to threading of other sharing cases.
But Mateusz Guzik reports that the extra locking is actually measurable,
so let's re-introduce the optimization, and only force the locking for
directory traversal.
Directories need the lock for correctness reasons, while regular files
only need it for "POSIX semantics". Since pidfd_getfd() is about
debuggers etc special things that are _way_ outside of POSIX, we can
relax the rules for that case.
Reported-by: Mateusz Guzik <mjguzik@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/linux-fsdevel/20230803095311.ijpvhx3fyrbkasul@f/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d62cc390c2 upstream.
We received report [1] of kernel crash, which is caused by
using nesting protection without disabled preemption.
The bpf_event_output can be called by programs executed by
bpf_prog_run_array_cg function that disabled migration but
keeps preemption enabled.
This can cause task to be preempted by another one inside the
nesting protection and lead eventually to two tasks using same
perf_sample_data buffer and cause crashes like:
BUG: kernel NULL pointer dereference, address: 0000000000000001
#PF: supervisor instruction fetch in kernel mode
#PF: error_code(0x0010) - not-present page
...
? perf_output_sample+0x12a/0x9a0
? finish_task_switch.isra.0+0x81/0x280
? perf_event_output+0x66/0xa0
? bpf_event_output+0x13a/0x190
? bpf_event_output_data+0x22/0x40
? bpf_prog_dfc84bbde731b257_cil_sock4_connect+0x40a/0xacb
? xa_load+0x87/0xe0
? __cgroup_bpf_run_filter_sock_addr+0xc1/0x1a0
? release_sock+0x3e/0x90
? sk_setsockopt+0x1a1/0x12f0
? udp_pre_connect+0x36/0x50
? inet_dgram_connect+0x93/0xa0
? __sys_connect+0xb4/0xe0
? udp_setsockopt+0x27/0x40
? __pfx_udp_push_pending_frames+0x10/0x10
? __sys_setsockopt+0xdf/0x1a0
? __x64_sys_connect+0xf/0x20
? do_syscall_64+0x3a/0x90
? entry_SYSCALL_64_after_hwframe+0x72/0xdc
Fixing this by disabling preemption in bpf_event_output.
[1] https://github.com/cilium/cilium/issues/26756
Cc: stable@vger.kernel.org
Reported-by: Oleg "livelace" Popov <o.popov@livelace.ru>
Closes: https://github.com/cilium/cilium/issues/26756
Fixes: 2a916f2f54 ("bpf: Use migrate_disable/enable in array macros and cgroup/lirc code.")
Acked-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230725084206.580930-3-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c9241f3ce upstream.
Commit 66b2c338ad initializes the "sk_uid" field in the protocol socket
(struct sock) from the "/dev/tapX" device node's owner UID. Per original
commit 86741ec254 ("net: core: Add a UID field to struct sock.",
2016-11-04), that's wrong: the idea is to cache the UID of the userspace
process that creates the socket. Commit 86741ec254 mentions socket() and
accept(); with "tap", the action that creates the socket is
open("/dev/tapX").
Therefore the device node's owner UID is irrelevant. In most cases,
"/dev/tapX" will be owned by root, so in practice, commit 66b2c338ad has
no observable effect:
- before, "sk_uid" would be zero, due to undefined behavior
(CVE-2023-1076),
- after, "sk_uid" would be zero, due to "/dev/tapX" being owned by root.
What matters is the (fs)UID of the process performing the open(), so cache
that in "sk_uid".
Cc: Eric Dumazet <edumazet@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pietro Borrello <borrello@diag.uniroma1.it>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 66b2c338ad ("tap: tap_open(): correctly initialize socket uid")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2173435
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9bc3047374 upstream.
Commit a096ccca6e initializes the "sk_uid" field in the protocol socket
(struct sock) from the "/dev/net/tun" device node's owner UID. Per
original commit 86741ec254 ("net: core: Add a UID field to struct
sock.", 2016-11-04), that's wrong: the idea is to cache the UID of the
userspace process that creates the socket. Commit 86741ec254 mentions
socket() and accept(); with "tun", the action that creates the socket is
open("/dev/net/tun").
Therefore the device node's owner UID is irrelevant. In most cases,
"/dev/net/tun" will be owned by root, so in practice, commit a096ccca6e
has no observable effect:
- before, "sk_uid" would be zero, due to undefined behavior
(CVE-2023-1076),
- after, "sk_uid" would be zero, due to "/dev/net/tun" being owned by root.
What matters is the (fs)UID of the process performing the open(), so cache
that in "sk_uid".
Cc: Eric Dumazet <edumazet@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pietro Borrello <borrello@diag.uniroma1.it>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: a096ccca6e ("tun: tun_chr_open(): correctly initialize socket uid")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2173435
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit daf60d6cca upstream.
The call stack shown below is a scenario in the Linux 4.19 kernel.
Allocating memory failed where exfat fs use kmalloc_array due to
system memory fragmentation, while the u-disk was inserted without
recognition.
Devices such as u-disk using the exfat file system are pluggable and
may be insert into the system at any time.
However, long-term running systems cannot guarantee the continuity of
physical memory. Therefore, it's necessary to address this issue.
Binder:2632_6: page allocation failure: order:4,
mode:0x6040c0(GFP_KERNEL|__GFP_COMP), nodemask=(null)
Call trace:
[242178.097582] dump_backtrace+0x0/0x4
[242178.097589] dump_stack+0xf4/0x134
[242178.097598] warn_alloc+0xd8/0x144
[242178.097603] __alloc_pages_nodemask+0x1364/0x1384
[242178.097608] kmalloc_order+0x2c/0x510
[242178.097612] kmalloc_order_trace+0x40/0x16c
[242178.097618] __kmalloc+0x360/0x408
[242178.097624] load_alloc_bitmap+0x160/0x284
[242178.097628] exfat_fill_super+0xa3c/0xe7c
[242178.097635] mount_bdev+0x2e8/0x3a0
[242178.097638] exfat_fs_mount+0x40/0x50
[242178.097643] mount_fs+0x138/0x2e8
[242178.097649] vfs_kern_mount+0x90/0x270
[242178.097655] do_mount+0x798/0x173c
[242178.097659] ksys_mount+0x114/0x1ac
[242178.097665] __arm64_sys_mount+0x24/0x34
[242178.097671] el0_svc_common+0xb8/0x1b8
[242178.097676] el0_svc_handler+0x74/0x90
[242178.097681] el0_svc+0x8/0x340
By analyzing the exfat code,we found that continuous physical memory
is not required here,so kvmalloc_array is used can solve this problem.
Cc: stable@vger.kernel.org
Signed-off-by: gaoming <gaoming20@hihonor.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e6e2843230 upstream.
If the cluster becomes unavailable, ceph_osdc_notify() may hang even
with osd_request_timeout option set because linger_notify_finish_wait()
waits for MWatchNotify NOTIFY_COMPLETE message with no associated OSD
request in flight -- it's completely asynchronous.
Introduce an additional timeout, derived from the specified notify
timeout. While at it, switch both waits to killable which is more
correct.
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e658519890 upstream.
Storage devices are free to send RSCNs, e.g. for internal state changes. If
this happens on all connected paths, zfcp risks temporarily losing all
paths at the same time. This has strong requirements on multipath
configuration such as "no_path_retry queue".
Avoid such situations by deferring fc_rport blocking until after the ADISC
response, when any actual state change of the remote port became clear.
The already existing port recovery triggers explicitly block the fc_rport.
The triggers are: on ADISC reject or timeout (typical cable pull case), and
on ADISC indicating that the remote port has changed its WWPN or
the port is meanwhile no longer open.
As a side effect, this also removes a confusing direct function call to
another work item function zfcp_scsi_rport_work() instead of scheduling
that other work item. It was probably done that way to have the rport block
side effect immediate and synchronous to the caller.
Fixes: a2fa0aede0 ("[SCSI] zfcp: Block FC transport rports early on errors")
Cc: stable@vger.kernel.org #v2.6.30+
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Link: https://lore.kernel.org/r/20230724145156.3920244-1-maier@linux.ibm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ddf251fa2b ]
Whenever tcpm_new() reclaims an old entry, tcpm_suck_dst()
would overwrite data that could be read from tcp_fastopen_cache_get()
or tcp_metrics_fill_info().
We need to acquire fastopen_seqlock to maintain consistency.
For newly allocated objects, tcpm_new() can switch to kzalloc()
to avoid an extra fastopen_seqlock acquisition.
Fixes: 1fe4c481ba ("net-tcp: Fast Open client - cookie cache")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c4d04f6b4 ]
tm->tcpm_vals[] values can be read or written locklessly.
Add needed READ_ONCE()/WRITE_ONCE() to document this,
and force use of tcp_metric_get() and tcp_metric_set()
Fixes: 51c5d0c4b1 ("tcp: Maintain dynamic metrics in local cache.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6638094d7 ]
Because v4 and v6 families use separate inetpeer trees (respectively
net->ipv4.peers and net->ipv6.peers), inetpeer_addr_cmp(a, b) assumes
a & b share the same family.
tcp_metrics use a common hash table, where entries can have different
families.
We must therefore make sure to not call inetpeer_addr_cmp()
if the families do not match.
Fixes: d39d14ffa2 ("net: Add helper function to compare inetpeer addresses")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c635ca45a7 ]
In the cited commit, new type of FS_TYPE_PRIO_CHAINS fs_prio was added
to support multiple parallel namespaces for multi-chains. And we skip
all the flow tables under the fs_node of this type unconditionally,
when searching for the next or previous flow table to connect for a
new table.
As this search function is also used for find new root table when the
old one is being deleted, it will skip the entire FS_TYPE_PRIO_CHAINS
fs_node next to the old root. However, new root table should be chosen
from it if there is any table in it. Fix it by skipping only the flow
tables in the same FS_TYPE_PRIO_CHAINS fs_node when finding the
closest FT for a fs_node.
Besides, complete the connecting from FTs of previous priority of prio
because there should be multiple prevs after this fs_prio type is
introduced. And also the next FT should be chosen from the first flow
table next to the prio in the same FS_TYPE_PRIO_CHAINS fs_prio, if
this prio is the first child.
Fixes: 328edb499f ("net/mlx5: Split FDB fast path prio to multiple namespaces")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/7a95754df479e722038996c97c97b062b372591f.1690803944.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1cfef80d4c ]
dev_close() and dev_open() are issued to change the interface state to DOWN
or UP (dev->flags IFF_UP). When the netdev is set DOWN it loses e.g its
Ipv6 addresses and routes. We don't want this in cases of device recovery
(triggered by hardware or software) or when the qeth device is set
offline.
Setting a qeth device offline or online and device recovery actions call
netif_device_detach() and/or netif_device_attach(). That will reset or
set the LOWER_UP indication i.e. change the dev->state Bit
__LINK_STATE_PRESENT. That is enough to e.g. cause bond failovers, and
still preserves the interface settings that are handled by the network
stack.
Don't call dev_open() nor dev_close() from the qeth device driver. Let the
network stack handle this.
Fixes: d4560150cb ("s390/qeth: call dev_close() during recovery")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31d49ba033 ]
The dcbnl_bcn_setcfg uses erroneous policy to parse tb[DCB_ATTR_BCN],
which is introduced in commit 859ee3c438 ("DCB: Add support for DCB
BCN"). Please see the comment in below code
static int dcbnl_bcn_setcfg(...)
{
...
ret = nla_parse_nested_deprecated(..., dcbnl_pfc_up_nest, .. )
// !!! dcbnl_pfc_up_nest for attributes
// DCB_PFC_UP_ATTR_0 to DCB_PFC_UP_ATTR_ALL in enum dcbnl_pfc_up_attrs
...
for (i = DCB_BCN_ATTR_RP_0; i <= DCB_BCN_ATTR_RP_7; i++) {
// !!! DCB_BCN_ATTR_RP_0 to DCB_BCN_ATTR_RP_7 in enum dcbnl_bcn_attrs
...
value_byte = nla_get_u8(data[i]);
...
}
...
for (i = DCB_BCN_ATTR_BCNA_0; i <= DCB_BCN_ATTR_RI; i++) {
// !!! DCB_BCN_ATTR_BCNA_0 to DCB_BCN_ATTR_RI in enum dcbnl_bcn_attrs
...
value_int = nla_get_u32(data[i]);
...
}
...
}
That is, the nla_parse_nested_deprecated uses dcbnl_pfc_up_nest
attributes to parse nlattr defined in dcbnl_pfc_up_attrs. But the
following access code fetch each nlattr as dcbnl_bcn_attrs attributes.
By looking up the associated nla_policy for dcbnl_bcn_attrs. We can find
the beginning part of these two policies are "same".
static const struct nla_policy dcbnl_pfc_up_nest[...] = {
[DCB_PFC_UP_ATTR_0] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_1] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_2] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_3] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_4] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_5] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_6] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_7] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_ALL] = {.type = NLA_FLAG},
};
static const struct nla_policy dcbnl_bcn_nest[...] = {
[DCB_BCN_ATTR_RP_0] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_1] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_2] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_3] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_4] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_5] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_6] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_7] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_ALL] = {.type = NLA_FLAG},
// from here is somewhat different
[DCB_BCN_ATTR_BCNA_0] = {.type = NLA_U32},
...
[DCB_BCN_ATTR_ALL] = {.type = NLA_FLAG},
};
Therefore, the current code is buggy and this
nla_parse_nested_deprecated could overflow the dcbnl_pfc_up_nest and use
the adjacent nla_policy to parse attributes from DCB_BCN_ATTR_BCNA_0.
Hence use the correct policy dcbnl_bcn_nest to parse the nested
tb[DCB_ATTR_BCN] TLV.
Fixes: 859ee3c438 ("DCB: Add support for DCB BCN")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230801013248.87240-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3bb7759a9 ]
As documented in acd7aaf51b ("netsec: ignore 'phy-mode' device
property on ACPI systems") the SocioNext SynQuacer platform ships with
firmware defining the PHY mode as RGMII even though the physical
configuration of the PHY is for TX and RX delays. Since bbc4d71d63
("net: phy: realtek: fix rtl8211e rx/tx delay config") this has caused
misconfiguration of the PHY, rendering the network unusable.
This was worked around for ACPI by ignoring the phy-mode property but
the system is also used with DT. For DT instead if we're running on a
SynQuacer force a working PHY mode, as well as the standard EDK2
firmware with DT there are also some of these systems that use u-boot
and might not initialise the PHY if not netbooting. Newer firmware
imagaes for at least EDK2 are available from Linaro so print a warning
when doing this.
Fixes: 533dd11a12 ("net: socionext: Add Synquacer NetSec driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230731-synquacer-net-v3-1-944be5f06428@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75ae8c284c ]
dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: ef45e8400f ("net: ll_temac: fix error checking of irq_of_parse_and_map()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13d2618b48 ]
Disabling preemption in sock_map_sk_acquire conflicts with GFP_ATOMIC
allocation later in sk_psock_init_link on PREEMPT_RT kernels, since
GFP_ATOMIC might sleep on RT (see bpf: Make BPF and PREEMPT_RT co-exist
patchset notes for details).
This causes calling bpf_map_update_elem on BPF_MAP_TYPE_SOCKMAP maps to
BUG (sleeping function called from invalid context) on RT kernels.
preempt_disable was introduced together with lock_sk and rcu_read_lock
in commit 99ba2b5aba ("bpf: sockhash, disallow bpf_tcp_close and update
in parallel"), probably to match disabled migration of BPF programs, and
is no longer necessary.
Remove preempt_disable to fix BUG in sock_map_update_common on RT.
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/all/20200224140131.461979697@linutronix.de/
Fixes: 99ba2b5aba ("bpf: sockhash, disallow bpf_tcp_close and update in parallel")
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230728064411.305576-1-tglozar@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b80b829e9e ]
When route4_change() is called on an existing filter, the whole
tcf_result struct is always copied into the new instance of the filter.
This causes a problem when updating a filter bound to a class,
as tcf_unbind_filter() is always called on the old instance in the
success path, decreasing filter_cnt of the still referenced class
and allowing it to be deleted, leading to a use-after-free.
Fix this by no longer copying the tcf_result struct from the old filter.
Fixes: 1109c00547 ("net: sched: RCU cls_route")
Reported-by: valis <sec@valis.email>
Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Signed-off-by: valis <sec@valis.email>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: M A Ramdhan <ramdhan@starlabs.sg>
Link: https://lore.kernel.org/r/20230729123202.72406-4-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76e42ae831 ]
When fw_change() is called on an existing filter, the whole
tcf_result struct is always copied into the new instance of the filter.
This causes a problem when updating a filter bound to a class,
as tcf_unbind_filter() is always called on the old instance in the
success path, decreasing filter_cnt of the still referenced class
and allowing it to be deleted, leading to a use-after-free.
Fix this by no longer copying the tcf_result struct from the old filter.
Fixes: e35a8ee599 ("net: sched: fw use RCU")
Reported-by: valis <sec@valis.email>
Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Signed-off-by: valis <sec@valis.email>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: M A Ramdhan <ramdhan@starlabs.sg>
Link: https://lore.kernel.org/r/20230729123202.72406-3-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3044b16e7c ]
When u32_change() is called on an existing filter, the whole
tcf_result struct is always copied into the new instance of the filter.
This causes a problem when updating a filter bound to a class,
as tcf_unbind_filter() is always called on the old instance in the
success path, decreasing filter_cnt of the still referenced class
and allowing it to be deleted, leading to a use-after-free.
Fix this by no longer copying the tcf_result struct from the old filter.
Fixes: de5df63228 ("net: sched: cls_u32 changes to knode must appear atomic to readers")
Reported-by: valis <sec@valis.email>
Reported-by: M A Ramdhan <ramdhan@starlabs.sg>
Signed-off-by: valis <sec@valis.email>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: M A Ramdhan <ramdhan@starlabs.sg>
Link: https://lore.kernel.org/r/20230729123202.72406-2-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5f0d2dd3c ]
In a prior commit I forgot that sk_getsockopt() reads
sk->sk_ll_usec without holding a lock.
Fixes: 0dbffbb533 ("net: annotate data race around sk_ll_usec")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11695c6e96 ]
sk_getsockopt() runs locklessly, thus we need to annotate the read
of sk->sk_peek_off.
While we are at it, add corresponding annotations to sk_set_peek_off()
and unix_set_peek_off().
Fixes: b9bb53f383 ("sock: convert sk_peek_offset functions to WRITE_ONCE")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4b5532530 ]
In a prior commit, I forgot to change sk_getsockopt()
when reading sk->sk_rcvbuf locklessly.
Fixes: ebb3b78db7 ("tcp: annotate sk->sk_rcvbuf lockless reads")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 74bc084327 ]
In a prior commit, I forgot to change sk_getsockopt()
when reading sk->sk_sndbuf locklessly.
Fixes: e292f05e0d ("tcp: annotate sk->sk_sndbuf lockless reads")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
