[ Upstream commit ebeb49f43c ]
The function call ida_simple_get maybe fail,we should deal with it.
And if ida_simple_get success ,it need to call ida_simple_remove also.
BTW,devm_kasprintf can handle id is zero for consistency.
Fixes: e76bdfd740 ("ARM: imx: Added perf functionality to mmdc driver")
Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5bf52f5e4d ]
The prototype does not match the definition, as gcc-13 points
out:
arch/arm/mach-s3c/s3c64xx.c:169:13: error: conflicting types for 's3c64xx_set_timer_source' due to enum/integer mismatch; have 'void(unsigned int, unsigned int)' [-Werror=enum-int-mismatch]
169 | void __init s3c64xx_set_timer_source(unsigned int event, unsigned int source)
| ^~~~~~~~~~~~~~~~~~~~~~~~
In file included from arch/arm/mach-s3c/s3c64xx.c:50:
arch/arm/mach-s3c/s3c64xx.h:62:20: note: previous declaration of 's3c64xx_set_timer_source' with type 'void(enum s3c64xx_timer_mode, enum s3c64xx_timer_mode)'
62 | extern void __init s3c64xx_set_timer_source(enum s3c64xx_timer_mode event,
| ^~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 4280506ac9 ("ARM: SAMSUNG: Move all platforms to new clocksource driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230118090224.2162863-1-arnd@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3cbd431c2b ]
Amlogic G12A devices experience CPU stalls and random board wedges when
the system idles and CPU cores clock down to lower opp points. Recent
vendor kernels include a change to remove 100-250MHz and other distro
sources also remove the 500/667MHz points. Unless all 100-667Mhz opps
are removed or the CPU governor forced to performance stalls are still
observed, so let's remove them to improve stability and uptime.
Fixes: b190056fa9 ("arm64: dts: meson-g12a: add cpus OPP table")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Link: https://lore.kernel.org/r/20230119053031.21400-1-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e8b90c025 ]
Current PCIe QMP PHY output name were changed in ("arm64: dts: qcom: Fix
IPQ8074 PCIe PHY nodes") however it did not account for the fact that GCC
driver is relying on the old names to match them as they are being used as
the parent for the gcc_pcie0_pipe_clk and gcc_pcie1_pipe_clk.
This broke parenting as GCC could not find the parent clock, so fix it by
changing to the names that driver is expecting.
Fixes: 942bcd33ed ("arm64: dts: qcom: Fix IPQ8074 PCIe PHY nodes")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113164449.906002-9-robimarko@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e83a9c41a ]
IPQ8074 comes in 2 silicon versions:
* v1 with 2x Gen2 PCIe ports and QMP PHY-s
* v2 with 1x Gen3 and 1x Gen2 PCIe ports and QMP PHY-s
v2 is the final and production version that is actually supported by the
kernel, however it looks like PCIe related nodes were added for the v1 SoC.
Finish the PCIe fixup by using the correct compatible, adding missing ATU
register space, declaring max-link-speed, use correct ranges, add missing
clocks and resets.
Fixes: 33057e1672 ("ARM: dts: ipq8074: Add pcie nodes")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113164449.906002-8-robimarko@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ba33591b4 ]
IPQ8074 comes in 2 silicon versions:
* v1 with 2x Gen2 PCIe ports and QMP PHY-s
* v2 with 1x Gen3 and 1x Gen2 PCIe ports and QMP PHY-s
v2 is the final and production version that is actually supported by the
kernel, however it looks like PCIe related nodes were added for the v1 SoC.
Now that we have Gen3 QMP PHY support, we can start fixing the PCIe support
by fixing the Gen3 QMP PHY node first.
Change the compatible to the Gen3 QMP PHY, correct the register space start
and size, add the missing misc PCS register space.
Fixes: 33057e1672 ("ARM: dts: ipq8074: Add pcie nodes")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113164449.906002-2-robimarko@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 942bcd33ed ]
IPQ8074 PCIe PHY nodes are broken in the many ways:
- '#address-cells', '#size-cells' and 'ranges' are missing.
- Child phy/lane node is missing, and the child properties like
'#phy-cells' and 'clocks' are mistakenly put into parent node.
- The clocks properties for parent node are missing.
Fix them to get the nodes comply with the bindings schema.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-9-shawn.guo@linaro.org
Stable-dep-of: 7ba33591b4 ("arm64: dts: qcom: ipq8074: fix Gen3 PCIe QMP PHY")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 877cff3568 ]
It seems that clock-output-names for the USB3 QMP PHY-s where set without
actually checking what is the GCC clock driver expecting, so clock core
could never actually find the parents for usb0_pipe_clk_src and
usb1_pipe_clk_src clocks in the GCC driver.
So, correct the names to be what the driver expects so that parenting
works.
Before:
gcc_usb0_pipe_clk_src 0 0 0 125000000 0 0 50000 Y
gcc_usb1_pipe_clk_src 0 0 0 125000000 0 0 50000 Y
After:
usb3phy_0_cc_pipe_clk 1 1 0 125000000 0 0 50000 Y
usb0_pipe_clk_src 1 1 0 125000000 0 0 50000 Y
gcc_usb0_pipe_clk 1 1 0 125000000 0 0 50000 Y
usb3phy_1_cc_pipe_clk 1 1 0 125000000 0 0 50000 Y
usb1_pipe_clk_src 1 1 0 125000000 0 0 50000 Y
gcc_usb1_pipe_clk 1 1 0 125000000 0 0 50000 Y
Fixes: 5e09bc51d0 ("arm64: dts: ipq8074: enable USB support")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230108130440.670181-2-robimarko@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce8a06b5ba ]
The systimer block derives its 13 MHz clock by dividing the main 26 MHz
oscillator clock by 2 internally, not through the TOPCKGEN clock
controller.
On the MT8183 this divider is set either by power-on-reset or by the
bootloader. The bootloader may then make the divider unconfigurable to,
but can be read out by, the operating system.
Making the systimer block take the 26 MHz clock directly requires
changing the implementations. As an ABI compatible fix, change the
input clock of the systimer block a fixed factor divide-by-2 clock
that takes the 26 MHz oscillator as its input.
Fixes: 5bc8e2875f ("arm64: dts: mt8183: add systimer0 device node")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221201084229.3464449-2-wenst@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8416262b0e ]
Reorder the clocks and corresponding names to match the QUSB2 phy
schema, fixing the following CHECK_DTBS errors:
arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dtb: phy@1613000: clock-names:0: 'cfg_ahb' was expected
From schema: /newdata/aosp-r/kernel/mainline/kernel/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dtb: phy@1613000: clock-names:1: 'ref' was expected
From schema: /newdata/aosp-r/kernel/mainline/kernel/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
Fixes: cff4bbaf2a ("arm64: dts: qcom: Add support for SM6125")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Martin Botka <martin.botka@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221216213343.1140143-1-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be8de06dc3 ]
The framebuffer configuration for kumano griffin, written in kumano dtsi
(which is overwritten in bahamut dts for its smaller panel) has to use a
1096x2560 configuration as this is what the panel (and framebuffer area)
has been initialized to. Downstream userspace also has access to (and
uses) this 2.5k mode by default, and only switches the panel to 4k when
requested.
Fixes: d0a6ce59ea ("arm64: dts: qcom: sm8150: Add support for SONY Xperia 1 / 5 (Kumano platform)")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221209191733.1458031-1-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d78c8e3289 upstream.
Clang warns:
arch/powerpc/mm/book3s64/radix_tlb.c:1191:23: error: variable 'hstart' is uninitialized when used here
__tlbiel_va_range(hstart, hend, pid,
^~~~~~
arch/powerpc/mm/book3s64/radix_tlb.c:1191:31: error: variable 'hend' is uninitialized when used here
__tlbiel_va_range(hstart, hend, pid,
^~~~
Rework the 'if (IS_ENABLE(CONFIG_TRANSPARENT_HUGEPAGE))' so hstart/hend
is always initialized to silence the warnings. That will also simplify
the 'else' path. Clang is getting confused with these warnings, but the
warnings is a false-positive.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220810114318.3220630-1-anders.roxell@linaro.org
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We can't use 0 here, as io_init_req() is always invoked with the
ctx uring_lock held. Newer kernels have IO_URING_F_UNLOCKED for this,
but previously we used IO_URING_F_NONBLOCK to indicate this as well.
Fixes: cf7f9cd500 ("io_uring: add missing lock in io_get_file_fixed")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
io_get_file_fixed will access io_uring's context. Lock it if it is
invoked unlocked (eg via io-wq) to avoid a race condition with fixed
files getting unregistered.
No single upstream patch exists for this issue, it was fixed as part
of the file assignment changes that went into the 5.18 cycle.
Signed-off-by: Jheng, Bing-Jhong Billy <billy@starlabs.sg>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45bf39f8df upstream.
Ever since commit 83e83ecb79 ("usb: core: get config and string
descriptors for unauthorized devices") was merged in 2013, there has
been no mechanism for reallocating the rawdescriptors buffers in
struct usb_device after the initial enumeration. Before that commit,
the buffers would be deallocated when a device was deauthorized and
reallocated when it was authorized and enumerated.
This means that the locking in the read_descriptors() routine is not
needed, since the buffers it reads will never be reallocated while the
routine is running. This locking can interfere with user programs
trying to read a hub's descriptors via sysfs while new child devices
of the hub are being initialized, since the hub is locked during this
procedure.
Since the locking in read_descriptors() hasn't been needed for over
nine years, we can remove it.
Reported-and-tested-by: Troels Liebe Bentsen <troels@connectedcars.dk>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/Y9l+wDTRbuZABzsE@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
