This reverts commit b51d71e4aa because
this script didn't end up being used. Remove it for now.
This script was planned to be used originally; however, in fact making a
custom build of fips140.ko alone isn't sufficient to support the testing
requirements, some of which were unknown at the time. The current
procedure is now to use a device-specific script to build custom boot
images; see http://go/fips140-for-android-gki#heading=h.bcuh1mqjhpc4.
Bug: 188620248
Change-Id: Ia6e41e3885fad7716d41ab466a656f097f3de2af
Signed-off-by: Eric Biggers <ebiggers@google.com>
It's obsolete and only works for unsupported Windows hosts and is
totally insecure and should never be used. Remove it in order to remove
a potential attack vector on Android systems.
Bug: 157965270
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I45acc8b894220cdc9f170f9d5428aca195e9af38
Bug: 222497969
Test: idle kingdom launches sucessfully with no mediaprovider crashes
Signed-off-by: Paul Lawrence <paullawrence@google.com>
Change-Id: Ia5f842fd4a0bf9a21d7c88874b13b84d42ab2c4d
Bug: 222619123
Test: fuse_test passes, on cuttlefish CtsCameraTestCases passes
Signed-off-by: Paul Lawrence <paullawrence@google.com>
Change-Id: I54c148206b5ad5ae5737939bcb076cbe6c40129c
Do not account __GFP_NORETRY allocation failure as cma_alloc_fail
since it's not critical failure(i.e., the caller with __GFP_NORETRY
should always carry on the fallback plan). It's also good for
compatibility POV with upstream since upstream cma_alloc_fail
only counts cma_alloc_fail with !__GFP_NORETRY since upstream
doesn't support __GFP_NORTRY yet.
Bug: 220669548
Signed-off-by: Minchan Kim <minchan@google.com>
Change-Id: I377e6b033c3786e10b6b1c814037a4fc40e20a73
We calculate nr_ports based on the max_nr_ports:
nr_queues = use_multiport(portdev) ? (nr_ports + 1) * 2 : 2;
If the device advertises a large max_nr_ports, we will end up with a
integer overflow. Fixing this by validating the max_nr_ports and fail
the probe for invalid max_nr_ports in this case.
Cc: Amit Shah <amit@kernel.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20211019070152.8236-3-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 28962ec595)
Bug: 196772804
Signed-off-by: Keir Fraser <keirf@google.com>
Change-Id: Idb5462a1268d2bde5f867f5455da0957ca68035a
In speculative fault path, while doing page table lookup, offset
is obtained at each level and value at that offset is read and
checks are perfomed on it, later to get next level offset we read
from previous level offset again. A concurrent page table reclaimation
operation could result in change in value at this offset, and we go
ahead and access it, this would result in reading an invalid entry.
Fix this by reading from previous level offset again and comparing
before performing next level access.
Bug: 221005439
Change-Id: I66b3d24ae79c7ee5ccce4ba7a94f028f4cf3fda0
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
(cherry picked from commit a817d6ed87)
ABI XML is tidied unconditionality from Android 13.
Bug: 221390852
Change-Id: If2d6ad724450d8affbf302f449e408ae2b0d3b2a
Signed-off-by: Giuliano Procida <gprocida@google.com>
This reverts commit 13d7c1f13e.
S2MPUs are no longer called excessively often during guest teardown,
re-enable them.
Bug: 219180169
Signed-off-by: Quentin Perret <qperret@google.com>
Change-Id: I4ae94d359b352dfa1566a2b1a3536010a5d3761b
During teardown, we currently walk the guest stage-2 page-table and
annotate all of its pages as 'pending poisoning' in the host stage-2.
Sadly, this requires a host stage-2 walk for every guest page, which is
rather inefficient and can lead to a long non-preemptible amount of time
spent at EL2. This gets particularly bad with IOMMUs as, in its current
form, the host stage-2 annotation triggers IOMMU updates.
To avoid the host stage-2 walks, let's annotate the pages pending
poisoning using a flag in the hyp_vmemmap instead.
Bug: 219180169
Signed-off-by: Quentin Perret <qperret@google.com>
Change-Id: I8894bd8e0b10ea8817763479412b540c0291e8f5
Add a 'flags' field to struct hyp_page, and reduce the size of the order
field to u8 to avoid growing the struct size.
Bug: 219180169
Signed-off-by: Quentin Perret <qperret@google.com>
Change-Id: If629935bb6fa7d832c595685083f7985cfcfa221
Although FF-A claims to require version v1.2 of SMCCC, in reality the
current set of calls work just fine with v1.1 and some devices ship with
EL3 firmware that advertises this configuration.
Allow pKVM to proxy FF-A calls for these devices by relaxing our SMCCC
version check to permit SMCCC v1.1+
Reported-by: Alan Stokes <alanstokes@google.com>
Bug: 222663556
Signed-off-by: Will Deacon <willdeacon@google.com>
Change-Id: I41e9ff35f169df3609acee7bbc67999c1d11c9d1
If the lower filesystem has deleted a file or folder behind our back, we
should drop it as well.
Bug: 221093504
Test: atest android.hardware.cts.CameraTest#testJpegThumbnailSize
several times in a row
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Change-Id: Ibd92dea83a82dd7ab21269ae5d2533e4826f5fb7
In the backing case, we initially want to call out to the fuse-bpf
implementation, and only fall back to userspace if that requests it.
Otherwise we end up making requests to userspace that the daemon may not
be equiped to respond to.
Change-Id: If3780aa8b7c45558717a9efba0b1781e8d63a3c0
Bug: 217570523
Test: generic/099
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Changes in 5.10.103
cgroup/cpuset: Fix a race between cpuset_attach() and cpu hotplug
btrfs: tree-checker: check item_size for inode_item
btrfs: tree-checker: check item_size for dev_item
clk: jz4725b: fix mmc0 clock gating
vhost/vsock: don't check owner in vhost_vsock_stop() while releasing
parisc/unaligned: Fix fldd and fstd unaligned handlers on 32-bit kernel
parisc/unaligned: Fix ldw() and stw() unalignment handlers
KVM: x86/mmu: make apf token non-zero to fix bug
drm/amdgpu: disable MMHUB PG for Picasso
drm/i915: Correctly populate use_sagv_wm for all pipes
sr9700: sanity check for packet length
USB: zaurus: support another broken Zaurus
CDC-NCM: avoid overflow in sanity checking
netfilter: nf_tables_offload: incorrect flow offload action array size
x86/fpu: Correct pkru/xstate inconsistency
tee: export teedev_open() and teedev_close_context()
optee: use driver internal tee_context for some rpc
ping: remove pr_err from ping_lookup
perf data: Fix double free in perf_session__delete()
bnx2x: fix driver load from initrd
bnxt_en: Fix active FEC reporting to ethtool
hwmon: Handle failure to register sensor with thermal zone correctly
bpf: Do not try bpf_msg_push_data with len 0
selftests: bpf: Check bpf_msg_push_data return value
bpf: Add schedule points in batch ops
io_uring: add a schedule point in io_add_buffers()
net: __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor friends
tipc: Fix end of loop tests for list_for_each_entry()
gso: do not skip outer ip header in case of ipip and net_failover
openvswitch: Fix setting ipv6 fields causing hw csum failure
drm/edid: Always set RGB444
net/mlx5e: Fix wrong return value on ioctl EEPROM query failure
net/sched: act_ct: Fix flow table lookup after ct clear or switching zones
net: ll_temac: check the return value of devm_kmalloc()
net: Force inlining of checksum functions in net/checksum.h
nfp: flower: Fix a potential leak in nfp_tunnel_add_shared_mac()
netfilter: nf_tables: fix memory leak during stateful obj update
net/smc: Use a mutex for locking "struct smc_pnettable"
surface: surface3_power: Fix battery readings on batteries without a serial number
udp_tunnel: Fix end of loop test in udp_tunnel_nic_unregister()
net/mlx5: Fix possible deadlock on rule deletion
net/mlx5: Fix wrong limitation of metadata match on ecpf
net/mlx5e: kTLS, Use CHECKSUM_UNNECESSARY for device-offloaded packets
spi: spi-zynq-qspi: Fix a NULL pointer dereference in zynq_qspi_exec_mem_op()
regmap-irq: Update interrupt clear register for proper reset
RDMA/rtrs-clt: Fix possible double free in error case
RDMA/rtrs-clt: Kill wait_for_inflight_permits
RDMA/rtrs-clt: Move free_permit from free_clt to rtrs_clt_close
configfs: fix a race in configfs_{,un}register_subsystem()
RDMA/ib_srp: Fix a deadlock
tracing: Have traceon and traceoff trigger honor the instance
iio: adc: men_z188_adc: Fix a resource leak in an error handling path
iio: adc: ad7124: fix mask used for setting AIN_BUFP & AIN_BUFM bits
iio: imu: st_lsm6dsx: wait for settling time in st_lsm6dsx_read_oneshot
iio: Fix error handling for PM
sc16is7xx: Fix for incorrect data being transmitted
ata: pata_hpt37x: disable primary channel on HPT371
Revert "USB: serial: ch341: add new Product ID for CH341A"
usb: gadget: rndis: add spinlock for rndis response list
USB: gadget: validate endpoint index for xilinx udc
tracefs: Set the group ownership in apply_options() not parse_options()
USB: serial: option: add support for DW5829e
USB: serial: option: add Telit LE910R1 compositions
usb: dwc2: drd: fix soft connect when gadget is unconfigured
usb: dwc3: pci: Fix Bay Trail phy GPIO mappings
usb: dwc3: gadget: Let the interrupt handler disable bottom halves.
xhci: re-initialize the HC during resume if HCE was set
xhci: Prevent futile URB re-submissions due to incorrect return value.
driver core: Free DMA range map when device is released
RDMA/cma: Do not change route.addr.src_addr outside state checks
thermal: int340x: fix memory leak in int3400_notify()
riscv: fix oops caused by irqsoff latency tracer
tty: n_gsm: fix encoding of control signal octet bit DV
tty: n_gsm: fix proper link termination after failed open
tty: n_gsm: fix NULL pointer access due to DLCI release
tty: n_gsm: fix wrong tty control line for flow control
tty: n_gsm: fix deadlock in gsmtty_open()
gpio: tegra186: Fix chip_data type confusion
memblock: use kfree() to release kmalloced memblock regions
Linux 5.10.103
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I574f0ca699653770d2a7d4418b3bd76c2669b138
commit c94afc46ca upstream.
memblock.{reserved,memory}.regions may be allocated using kmalloc() in
memblock_double_array(). Use kfree() to release these kmalloced regions
indicated by memblock_{reserved,memory}_in_slab.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Fixes: 3010f87650 ("mm: discard memblock data later")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d1e972ace4 upstream.
The tegra186 GPIO driver makes the assumption that the pointer
returned by irq_data_get_irq_chip_data() is a pointer to a
tegra_gpio structure. Unfortunately, it is actually a pointer
to the inner gpio_chip structure, as mandated by the gpiolib
infrastructure. Nice try.
The saving grace is that the gpio_chip is the first member of
tegra_gpio, so the bug has gone undetected since... forever.
Fix it by performing a container_of() on the pointer. This results
in no additional code, and makes it possible to understand how
the whole thing works.
Fixes: 5b2b135a87 ("gpio: Add Tegra186 support")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20220211093904.1112679-1-maz@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a2ab75b8e7 upstream.
In the current implementation the user may open a virtual tty which then
could fail to establish the underlying DLCI. The function gsmtty_open()
gets stuck in tty_port_block_til_ready() while waiting for a carrier rise.
This happens if the remote side fails to acknowledge the link establishment
request in time or completely. At some point gsm_dlci_close() is called
to abort the link establishment attempt. The function tries to inform the
associated virtual tty by performing a hangup. But the blocking loop within
tty_port_block_til_ready() is not informed about this event.
The patch proposed here fixes this by resetting the initialization state of
the virtual tty to ensure the loop exits and triggering it to make
tty_port_block_til_ready() return.
Fixes: e1eaea46bb ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220218073123.2121-7-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c19d93542a upstream.
tty flow control is handled via gsmtty_throttle() and gsmtty_unthrottle().
Both functions propagate the outgoing hardware flow control state to the
remote side via MSC (modem status command) frames. The local state is taken
from the RTS (ready to send) flag of the tty. However, RTS gets mapped to
DTR (data terminal ready), which is wrong.
This patch corrects this by mapping RTS to RTS.
Fixes: e1eaea46bb ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220218073123.2121-5-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 96b169f05c upstream.
The here fixed commit made the tty hangup asynchronous to avoid a circular
locking warning. I could not reproduce this warning. Furthermore, due to
the asynchronous hangup the function call now gets queued up while the
underlying tty is being freed. Depending on the timing this results in a
NULL pointer access in the global work queue scheduler. To be precise in
process_one_work(). Therefore, the previous commit made the issue worse
which it tried to fix.
This patch fixes this by falling back to the old behavior which uses a
blocking tty hangup call before freeing up the associated tty.
Fixes: 7030082a74 ("tty: n_gsm: avoid recursive locking with async port hangup")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220218073123.2121-4-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e3b7468f08 upstream.
Trying to open a DLCI by sending a SABM frame may fail with a timeout.
The link is closed on the initiator side without informing the responder
about this event. The responder assumes the link is open after sending a
UA frame to answer the SABM frame. The link gets stuck in a half open
state.
This patch fixes this by initiating the proper link termination procedure
after link setup timeout instead of silently closing it down.
Fixes: e1eaea46bb ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220218073123.2121-3-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 737b0ef3be upstream.
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.4.6.3.7 describes the encoding of the
control signal octet used by the MSC (modem status command). The same
encoding is also used in convergence layer type 2 as described in chapter
5.5.2. Table 7 and 24 both require the DV (data valid) bit to be set 1 for
outgoing control signal octets sent by the DTE (data terminal equipment),
i.e. for the initiator side.
Currently, the DV bit is only set if CD (carrier detect) is on, regardless
of the side.
This patch fixes this behavior by setting the DV bit on the initiator side
unconditionally.
Fixes: e1eaea46bb ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220218073123.2121-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 22e9f71072 upstream.
If the state is not idle then resolve_prepare_src() should immediately
fail and no change to global state should happen. However, it
unconditionally overwrites the src_addr trying to build a temporary any
address.
For instance if the state is already RDMA_CM_LISTEN then this will corrupt
the src_addr and would cause the test in cma_cancel_operation():
if (cma_any_addr(cma_src_addr(id_priv)) && !id_priv->cma_dev)
Which would manifest as this trace from syzkaller:
BUG: KASAN: use-after-free in __list_add_valid+0x93/0xa0 lib/list_debug.c:26
Read of size 8 at addr ffff8881546491e0 by task syz-executor.1/32204
CPU: 1 PID: 32204 Comm: syz-executor.1 Not tainted 5.12.0-rc8-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x141/0x1d7 lib/dump_stack.c:120
print_address_description.constprop.0.cold+0x5b/0x2f8 mm/kasan/report.c:232
__kasan_report mm/kasan/report.c:399 [inline]
kasan_report.cold+0x7c/0xd8 mm/kasan/report.c:416
__list_add_valid+0x93/0xa0 lib/list_debug.c:26
__list_add include/linux/list.h:67 [inline]
list_add_tail include/linux/list.h:100 [inline]
cma_listen_on_all drivers/infiniband/core/cma.c:2557 [inline]
rdma_listen+0x787/0xe00 drivers/infiniband/core/cma.c:3751
ucma_listen+0x16a/0x210 drivers/infiniband/core/ucma.c:1102
ucma_write+0x259/0x350 drivers/infiniband/core/ucma.c:1732
vfs_write+0x28e/0xa30 fs/read_write.c:603
ksys_write+0x1ee/0x250 fs/read_write.c:658
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xae
This is indicating that an rdma_id_private was destroyed without doing
cma_cancel_listens().
Instead of trying to re-use the src_addr memory to indirectly create an
any address derived from the dst build one explicitly on the stack and
bind to that as any other normal flow would do. rdma_bind_addr() will copy
it over the src_addr once it knows the state is valid.
This is similar to commit bc0bdc5afa ("RDMA/cma: Do not change
route.addr.src_addr.ss_family")
Link: https://lore.kernel.org/r/0-v2-e975c8fd9ef2+11e-syz_cma_srcaddr_jgg@nvidia.com
Cc: stable@vger.kernel.org
Fixes: 732d41c545 ("RDMA/cma: Make the locking for automatic state transition more clear")
Reported-by: syzbot+c94a3675a626f6333d74@syzkaller.appspotmail.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 243a1dd7ba upstream.
The -ENODEV return value from xhci_check_args() is incorrectly changed
to -EINVAL in a couple places before propagated further.
xhci_check_args() returns 4 types of value, -ENODEV, -EINVAL, 1 and 0.
xhci_urb_enqueue and xhci_check_streams_endpoint return -EINVAL if
the return value of xhci_check_args <= 0.
This causes problems for example r8152_submit_rx, calling usb_submit_urb
in drivers/net/usb/r8152.c.
r8152_submit_rx will never get -ENODEV after submiting an urb when xHC
is halted because xhci_urb_enqueue returns -EINVAL in the very beginning.
[commit message and header edit -Mathias]
Fixes: 203a86613f ("xhci: Avoid NULL pointer deref when host dies.")
Cc: stable@vger.kernel.org
Signed-off-by: Hongyu Xie <xiehongyu1@kylinos.cn>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220215123320.1253947-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 84918a89d6 upstream.
The interrupt service routine registered for the gadget is a primary
handler which mask the interrupt source and a threaded handler which
handles the source of the interrupt. Since the threaded handler is
voluntary threaded, the IRQ-core does not disable bottom halves before
invoke the handler like it does for the forced-threaded handler.
Due to changes in networking it became visible that a network gadget's
completions handler may schedule a softirq which remains unprocessed.
The gadget's completion handler is usually invoked either in hard-IRQ or
soft-IRQ context. In this context it is enough to just raise the softirq
because the softirq itself will be handled once that context is left.
In the case of the voluntary threaded handler, there is nothing that
will process pending softirqs. Which means it remain queued until
another random interrupt (on this CPU) fires and handles it on its exit
path or another thread locks and unlocks a lock with the bh suffix.
Worst case is that the CPU goes idle and the NOHZ complains about
unhandled softirqs.
Disable bottom halves before acquiring the lock (and disabling
interrupts) and enable them after dropping the lock. This ensures that
any pending softirqs will handled right away.
Link: https://lkml.kernel.org/r/c2a64979-73d1-2c22-e048-c275c9f81558@samsung.com
Fixes: e5f68b4a3e ("Revert "usb: dwc3: gadget: remove unnecessary _irqsave()"")
Cc: stable <stable@kernel.org>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/Yg/YPejVQH3KkRVd@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 62e3f0afe2 upstream.
When the Bay Trail phy GPIO mappings where added cs and reset were swapped,
this did not cause any issues sofar, because sofar they were always driven
high/low at the same time.
Note the new mapping has been verified both in /sys/kernel/debug/gpio
output on Android factory images on multiple devices, as well as in
the schematics for some devices.
Fixes: 5741022cbd ("usb: dwc3: pci: Add GPIO lookup table on platforms without ACPI GPIO resources")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220213130524.18748-3-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 32fde84362 upstream.
When the gadget driver hasn't been (yet) configured, and the cable is
connected to a HOST, the SFTDISCON gets cleared unconditionally, so the
HOST tries to enumerate it.
At the host side, this can result in a stuck USB port or worse. When
getting lucky, some dmesg can be observed at the host side:
new high-speed USB device number ...
device descriptor read/64, error -110
Fix it in drd, by checking the enabled flag before calling
dwc2_hsotg_core_connect(). It will be called later, once configured,
by the normal flow:
- udc_bind_to_driver
- usb_gadget_connect
- dwc2_hsotg_pullup
- dwc2_hsotg_core_connect
Fixes: 17f934024e ("usb: dwc2: override PHY input signals with usb role switch support")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/1644999135-13478-1-git-send-email-fabrice.gasnier@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d093e02e8 upstream.
The HPT371 chip physically has only one channel, the secondary one,
however the primary channel registers do exist! Thus we have to
manually disable the non-existing channel if the BIOS hasn't done this
already. Similarly to the pata_hpt3x2n driver, always disable the
primary channel.
Fixes: 669a5db411 ("[libata] Add a bunch of PATA drivers.")
Cc: stable@vger.kernel.org
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eebb0f4e89 upstream.
UART drivers are meant to use the port spinlock within certain
methods, to protect against reentrancy. The sc16is7xx driver does
very little locking, presumably because when added it triggers
"scheduling while atomic" errors. This is due to the use of mutexes
within the regmap abstraction layer, and the mutex implementation's
habit of sleeping the current thread while waiting for access.
Unfortunately this lack of interlocking can lead to corruption of
outbound data, which occurs when the buffer used for I2C transmission
is used simultaneously by two threads - a work queue thread running
sc16is7xx_tx_proc, and an IRQ thread in sc16is7xx_port_irq, both
of which can call sc16is7xx_handle_tx.
An earlier patch added efr_lock, a mutex that controls access to the
EFR register. This mutex is already claimed in the IRQ handler, and
all that is required is to claim the same mutex in sc16is7xx_tx_proc.
See: https://github.com/raspberrypi/linux/issues/4885
Fixes: 6393ff1c44 ("sc16is7xx: Use threaded IRQ")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Link: https://lore.kernel.org/r/20220216160802.1026013-1-phil@raspberrypi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 632fe0bb8c upstream.
The pm_runtime_enable will increase power disable depth.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable(). In the PM Runtime docs:
Drivers in ->remove() callback should undo the runtime PM changes done
in ->probe(). Usually this means calling pm_runtime_disable(),
pm_runtime_dont_use_autosuspend() etc.
We should do this in error handling.
Fix this problem for the following drivers: bmc150, bmg160, kmx61,
kxcj-1013, mma9551, mma9553.
Fixes: 7d0ead5c3f ("iio: Reconcile operation order between iio_register/unregister and pm functions")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220106112309.16879-1-linmq006@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 84ec758fb2 ]
When configfs_register_subsystem() or configfs_unregister_subsystem()
is executing link_group() or unlink_group(),
it is possible that two processes add or delete list concurrently.
Some unfortunate interleavings of them can cause kernel panic.
One of cases is:
A --> B --> C --> D
A <-- B <-- C <-- D
delete list_head *B | delete list_head *C
--------------------------------|-----------------------------------
configfs_unregister_subsystem | configfs_unregister_subsystem
unlink_group | unlink_group
unlink_obj | unlink_obj
list_del_init | list_del_init
__list_del_entry | __list_del_entry
__list_del | __list_del
// next == C |
next->prev = prev |
| next->prev = prev
prev->next = next |
| // prev == B
| prev->next = next
Fix this by adding mutex when calling link_group() or unlink_group(),
but parent configfs_subsystem is NULL when config_item is root.
So I create a mutex configfs_subsystem_mutex.
Fixes: 7063fbf226 ("[PATCH] configfs: User-driven configuration filesystem")
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Signed-off-by: Laibin Qiu <qiulaibin@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c46fa8911b ]
Error path of rtrs_clt_open() calls free_clt(), where free_permit is
called. This is wrong since error path of rtrs_clt_open() does not need
to call free_permit().
Also, moving free_permits() call to rtrs_clt_close(), makes it more
aligned with the call to alloc_permit() in rtrs_clt_open().
Fixes: 6a98d71dae ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20220217030929.323849-2-haris.iqbal@ionos.com
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
