commit b6f56a44e4c1014b08859dcf04ed246500e310e5 upstream.
Since commit 7d5e9737ef ("net: rfkill: gpio: get the name and type from
device property") rfkill_find_type() gets called with the possibly
uninitialized "const char *type_name;" local variable.
On x86 systems when rfkill-gpio binds to a "BCM4752" or "LNV4752"
acpi_device, the rfkill->type is set based on the ACPI acpi_device_id:
rfkill->type = (unsigned)id->driver_data;
and there is no "type" property so device_property_read_string() will fail
and leave type_name uninitialized, leading to a potential crash.
rfkill_find_type() does accept a NULL pointer, fix the potential crash
by initializing type_name to NULL.
Note likely sofar this has not been caught because:
1. Not many x86 machines actually have a "BCM4752"/"LNV4752" acpi_device
2. The stack happened to contain NULL where type_name is stored
Fixes: 7d5e9737ef ("net: rfkill: gpio: get the name and type from device property")
Cc: stable@vger.kernel.org
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20250913113515.21698-1-hansg@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d02e48830e3fce9701265f6c5a58d9bdaf906a76 upstream.
Commit 3bbf3565f4 ("svm: Do not intercept CR8 when enable AVIC")
inhibited pre-VMRUN sync of TPR from LAPIC into VMCB::V_TPR in
sync_lapic_to_cr8() when AVIC is active.
AVIC does automatically sync between these two fields, however it does
so only on explicit guest writes to one of these fields, not on a bare
VMRUN.
This meant that when AVIC is enabled host changes to TPR in the LAPIC
state might not get automatically copied into the V_TPR field of VMCB.
This is especially true when it is the userspace setting LAPIC state via
KVM_SET_LAPIC ioctl() since userspace does not have access to the guest
VMCB.
Practice shows that it is the V_TPR that is actually used by the AVIC to
decide whether to issue pending interrupts to the CPU (not TPR in TASKPRI),
so any leftover value in V_TPR will cause serious interrupt delivery issues
in the guest when AVIC is enabled.
Fix this issue by doing pre-VMRUN TPR sync from LAPIC into VMCB::V_TPR
even when AVIC is enabled.
Fixes: 3bbf3565f4 ("svm: Do not intercept CR8 when enable AVIC")
Cc: stable@vger.kernel.org
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Naveen N Rao (AMD) <naveen@kernel.org>
Link: https://lore.kernel.org/r/c231be64280b1461e854e1ce3595d70cde3a2e9d.1756139678.git.maciej.szmigiero@oracle.com
[sean: tag for stable@]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 68f27f7c7708183e7873c585ded2f1b057ac5b97 upstream.
If earlier opening of source graph fails (e.g. ADSP rejects due to
incorrect audioreach topology), the graph is closed and
"dai_data->graph[dai->id]" is assigned NULL. Preparing the DAI for sink
graph continues though and next call to q6apm_lpass_dai_prepare()
receives dai_data->graph[dai->id]=NULL leading to NULL pointer
exception:
qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001002 cmd
qcom-apm gprsvc:service:2:1: DSP returned error[1001002] 1
q6apm-lpass-dais 30000000.remoteproc:glink-edge:gpr:service@1:bedais: fail to start APM port 78
q6apm-lpass-dais 30000000.remoteproc:glink-edge:gpr:service@1:bedais: ASoC: error at snd_soc_pcm_dai_prepare on TX_CODEC_DMA_TX_3: -22
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a8
...
Call trace:
q6apm_graph_media_format_pcm+0x48/0x120 (P)
q6apm_lpass_dai_prepare+0x110/0x1b4
snd_soc_pcm_dai_prepare+0x74/0x108
__soc_pcm_prepare+0x44/0x160
dpcm_be_dai_prepare+0x124/0x1c0
Fixes: 30ad723b93 ("ASoC: qdsp6: audioreach: add q6apm lpass dai support")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Message-ID: <20250904101849.121503-2-krzysztof.kozlowski@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 96fa515e70f3e4b98685ef8cac9d737fc62f10e1 upstream.
[BUG]
Inside check_inode_ref(), we need to make sure every structure,
including the btrfs_inode_extref header, is covered by the item. But
our code is incorrectly using "sizeof(iref)", where @iref is just a
pointer.
This means "sizeof(iref)" will always be "sizeof(void *)", which is much
smaller than "sizeof(struct btrfs_inode_extref)".
This will allow some bad inode extrefs to sneak in, defeating tree-checker.
[FIX]
Fix the typo by calling "sizeof(*iref)", which is the same as
"sizeof(struct btrfs_inode_extref)", and will be the correct behavior we
want.
Fixes: 71bf92a9b8 ("btrfs: tree-checker: Add check for INODE_REF")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dce043c07ca1ac19cfbe2844a6dc71e35c322353 upstream.
switch_to_super_page() assumes the memory range it's working on is aligned
to the target large page level. Unfortunately, __domain_mapping() doesn't
take this into account when using it, and will pass unaligned ranges
ultimately freeing a PTE range larger than expected.
Take for example a mapping with the following iov_pfn range [0x3fe400,
0x4c0600), which should be backed by the following mappings:
iov_pfn [0x3fe400, 0x3fffff] covered by 2MiB pages
iov_pfn [0x400000, 0x4bffff] covered by 1GiB pages
iov_pfn [0x4c0000, 0x4c05ff] covered by 2MiB pages
Under this circumstance, __domain_mapping() will pass [0x400000, 0x4c05ff]
to switch_to_super_page() at a 1 GiB granularity, which will in turn
free PTEs all the way to iov_pfn 0x4fffff.
Mitigate this by rounding down the iov_pfn range passed to
switch_to_super_page() in __domain_mapping()
to the target large page level.
Additionally add range alignment checks to switch_to_super_page.
Fixes: 9906b9352a ("iommu/vt-d: Avoid duplicate removing in __domain_mapping()")
Signed-off-by: Eugene Koira <eugkoira@amazon.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicolas Saenz Julienne <nsaenz@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20250826143816.38686-1-eugkoira@amazon.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 51adb03e6b865c0c6790f29659ff52d56742de2e upstream.
Add a check for the return value of kobject_create_and_add(), to ensure
that the kobj allocation succeeds for later use.
Cc: stable@vger.kernel.org
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9d13433fe17be0e867e51e71a1acd2731fbef8d upstream.
ARCH_STRICT_ALIGN is used for hardware without UAL, now it only control
the -mstrict-align flag. However, ACPI structures are packed by default
so will cause unaligned accesses.
To avoid this, define ACPI_MISALIGNMENT_NOT_SUPPORTED in asm/acenv.h to
align ACPI structures if ARCH_STRICT_ALIGN enabled.
Cc: stable@vger.kernel.org
Reported-by: Binbin Zhou <zhoubinbin@loongson.cn>
Suggested-by: Xi Ruoyao <xry111@xry111.site>
Suggested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5003098e2f337d8e8a87dc636250e3fa978d9ad upstream.
Loongson-3A6000 and 3C6000 CPUs also support unaligned memory access, so
the current description is out of date to some extent.
Actually, all of Loongson-3 series processors based on LoongArch support
unaligned memory access, this hardware capability is indicated by the bit
20 (UAL) of CPUCFG1 register, update the help info to reflect the reality.
Cc: stable@vger.kernel.org
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1e451977e1703b6db072719b37cd1b8e250b9cc9 upstream.
There are fuel gauges in the bq27xxx series (e.g. bq27z561) which may in some
cases report 0xff as the value of BQ27XXX_REG_FLAGS that should not be
interpreted as "no battery" like for a disconnected battery with some built
in bq27000 chip.
So restrict the no-battery detection originally introduced by
commit 3dd843e1c2 ("bq27000: report missing device better.")
to the bq27000.
There is no need to backport further because this was hidden before
commit f16d9fb6cf03 ("power: supply: bq27xxx: Retrieve again when busy")
Fixes: f16d9fb6cf03 ("power: supply: bq27xxx: Retrieve again when busy")
Suggested-by: Jerry Lv <Jerry.Lv@axis.com>
Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/dd979fa6855fd051ee5117016c58daaa05966e24.1755945297.git.hns@goldelico.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2c334d038466ac509468fbe06905a32d202117db upstream.
Since commit
commit f16d9fb6cf03 ("power: supply: bq27xxx: Retrieve again when busy")
the console log of some devices with hdq enabled but no bq27000 battery
(like e.g. the Pandaboard) is flooded with messages like:
[ 34.247833] power_supply bq27000-battery: driver failed to report 'status' property: -1
as soon as user-space is finding a /sys entry and trying to read the
"status" property.
It turns out that the offending commit changes the logic to now return the
value of cache.flags if it is <0. This is likely under the assumption that
it is an error number. In normal errors from bq27xxx_read() this is indeed
the case.
But there is special code to detect if no bq27000 is installed or accessible
through hdq/1wire and wants to report this. In that case, the cache.flags
are set historically by
commit 3dd843e1c2 ("bq27000: report missing device better.")
to constant -1 which did make reading properties return -ENODEV. So everything
appeared to be fine before the return value was passed upwards.
Now the -1 is returned as -EPERM instead of -ENODEV, triggering the error
condition in power_supply_format_property() which then floods the console log.
So we change the detection of missing bq27000 battery to simply set
cache.flags = -ENODEV
instead of -1.
Fixes: f16d9fb6cf03 ("power: supply: bq27xxx: Retrieve again when busy")
Cc: Jerry Lv <Jerry.Lv@axis.com>
Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/692f79eb6fd541adb397038ea6e750d4de2deddf.1755945297.git.hns@goldelico.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b34cbbf4f011a121ef7b2d7d6e6920a036d5285 upstream.
Issuing two writes to the same af_alg socket is bogus as the
data will be interleaved in an unpredictable fashion. Furthermore,
concurrent writes may create inconsistencies in the internal
socket state.
Disallow this by adding a new ctx->write field that indiciates
exclusive ownership for writing.
Fixes: 8ff590903d ("crypto: algif_skcipher - User-space interface for skcipher operations")
Reported-by: Muhammad Alifa Ramdhan <ramdhan@starlabs.sg>
Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 025e87f8ea2ae3a28bf1fe2b052bfa412c27ed4a upstream.
When accessing one of the files under /sys/fs/nilfs2/features when
CONFIG_CFI_CLANG is enabled, there is a CFI violation:
CFI failure at kobj_attr_show+0x59/0x80 (target: nilfs_feature_revision_show+0x0/0x30; expected type: 0xfc392c4d)
...
Call Trace:
<TASK>
sysfs_kf_seq_show+0x2a6/0x390
? __cfi_kobj_attr_show+0x10/0x10
kernfs_seq_show+0x104/0x15b
seq_read_iter+0x580/0xe2b
...
When the kobject of the kset for /sys/fs/nilfs2 is initialized, its ktype
is set to kset_ktype, which has a ->sysfs_ops of kobj_sysfs_ops. When
nilfs_feature_attr_group is added to that kobject via
sysfs_create_group(), the kernfs_ops of each files is sysfs_file_kfops_rw,
which will call sysfs_kf_seq_show() when ->seq_show() is called.
sysfs_kf_seq_show() in turn calls kobj_attr_show() through
->sysfs_ops->show(). kobj_attr_show() casts the provided attribute out to
a 'struct kobj_attribute' via container_of() and calls ->show(), resulting
in the CFI violation since neither nilfs_feature_revision_show() nor
nilfs_feature_README_show() match the prototype of ->show() in 'struct
kobj_attribute'.
Resolve the CFI violation by adjusting the second parameter in
nilfs_feature_{revision,README}_show() from 'struct attribute' to 'struct
kobj_attribute' to match the expected prototype.
Link: https://lkml.kernel.org/r/20250906144410.22511-1-konishi.ryusuke@gmail.com
Fixes: aebe17f684 ("nilfs2: add /sys/fs/nilfs2/features group")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202509021646.bc78d9ef-lkp@intel.com/
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5282491fc49d5614ac6ddcd012e5743eecb6a67c upstream.
If data_offset and data_length of smb_direct_data_transfer struct are
invalid, out of bounds issue could happen.
This patch validate data_offset and data_length field in recv_done.
Cc: stable@vger.kernel.org
Fixes: 2ea086e35c ("ksmbd: add buffer validation for smb direct")
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Reported-by: Luigino Camastra, Aisle Research <luigino.camastra@aisle.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f8b4687151021db61841af983f1cb7be6915d4ef ]
The original code relies on cancel_delayed_work() in otx2_ptp_destroy(),
which does not ensure that the delayed work item synctstamp_work has fully
completed if it was already running. This leads to use-after-free scenarios
where otx2_ptp is deallocated by otx2_ptp_destroy(), while synctstamp_work
remains active and attempts to dereference otx2_ptp in otx2_sync_tstamp().
Furthermore, the synctstamp_work is cyclic, the likelihood of triggering
the bug is nonnegligible.
A typical race condition is illustrated below:
CPU 0 (cleanup) | CPU 1 (delayed work callback)
otx2_remove() |
otx2_ptp_destroy() | otx2_sync_tstamp()
cancel_delayed_work() |
kfree(ptp) |
| ptp = container_of(...); //UAF
| ptp-> //UAF
This is confirmed by a KASAN report:
BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0
Write of size 8 at addr ffff88800aa09a18 by task bash/136
...
Call Trace:
<IRQ>
dump_stack_lvl+0x55/0x70
print_report+0xcf/0x610
? __run_timer_base.part.0+0x7d7/0x8c0
kasan_report+0xb8/0xf0
? __run_timer_base.part.0+0x7d7/0x8c0
__run_timer_base.part.0+0x7d7/0x8c0
? __pfx___run_timer_base.part.0+0x10/0x10
? __pfx_read_tsc+0x10/0x10
? ktime_get+0x60/0x140
? lapic_next_event+0x11/0x20
? clockevents_program_event+0x1d4/0x2a0
run_timer_softirq+0xd1/0x190
handle_softirqs+0x16a/0x550
irq_exit_rcu+0xaf/0xe0
sysvec_apic_timer_interrupt+0x70/0x80
</IRQ>
...
Allocated by task 1:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x7f/0x90
otx2_ptp_init+0xb1/0x860
otx2_probe+0x4eb/0xc30
local_pci_probe+0xdc/0x190
pci_device_probe+0x2fe/0x470
really_probe+0x1ca/0x5c0
__driver_probe_device+0x248/0x310
driver_probe_device+0x44/0x120
__driver_attach+0xd2/0x310
bus_for_each_dev+0xed/0x170
bus_add_driver+0x208/0x500
driver_register+0x132/0x460
do_one_initcall+0x89/0x300
kernel_init_freeable+0x40d/0x720
kernel_init+0x1a/0x150
ret_from_fork+0x10c/0x1a0
ret_from_fork_asm+0x1a/0x30
Freed by task 136:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3a/0x60
__kasan_slab_free+0x3f/0x50
kfree+0x137/0x370
otx2_ptp_destroy+0x38/0x80
otx2_remove+0x10d/0x4c0
pci_device_remove+0xa6/0x1d0
device_release_driver_internal+0xf8/0x210
pci_stop_bus_device+0x105/0x150
pci_stop_and_remove_bus_device_locked+0x15/0x30
remove_store+0xcc/0xe0
kernfs_fop_write_iter+0x2c3/0x440
vfs_write+0x871/0xd70
ksys_write+0xee/0x1c0
do_syscall_64+0xac/0x280
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the delayed work item is properly canceled before the otx2_ptp is
deallocated.
This bug was initially identified through static analysis. To reproduce
and test it, I simulated the OcteonTX2 PCI device in QEMU and introduced
artificial delays within the otx2_sync_tstamp() function to increase the
likelihood of triggering the bug.
Fixes: 2958d17a89 ("octeontx2-pf: Add support for ptp 1-step mode on CN10K silicon")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfa7d9b1e3a8604afc84e9e51d789c29574fb216 ]
The original code uses cancel_delayed_work() in cnic_cm_stop_bnx2x_hw(),
which does not guarantee that the delayed work item 'delete_task' has
fully completed if it was already running. Additionally, the delayed work
item is cyclic, the flush_workqueue() in cnic_cm_stop_bnx2x_hw() only
blocks and waits for work items that were already queued to the
workqueue prior to its invocation. Any work items submitted after
flush_workqueue() is called are not included in the set of tasks that the
flush operation awaits. This means that after the cyclic work items have
finished executing, a delayed work item may still exist in the workqueue.
This leads to use-after-free scenarios where the cnic_dev is deallocated
by cnic_free_dev(), while delete_task remains active and attempt to
dereference cnic_dev in cnic_delete_task().
A typical race condition is illustrated below:
CPU 0 (cleanup) | CPU 1 (delayed work callback)
cnic_netdev_event() |
cnic_stop_hw() | cnic_delete_task()
cnic_cm_stop_bnx2x_hw() | ...
cancel_delayed_work() | /* the queue_delayed_work()
flush_workqueue() | executes after flush_workqueue()*/
| queue_delayed_work()
cnic_free_dev(dev)//free | cnic_delete_task() //new instance
| dev = cp->dev; //use
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the cyclic delayed work item is properly canceled and that any
ongoing execution of the work item completes before the cnic_dev is
deallocated. Furthermore, since cancel_delayed_work_sync() uses
__flush_work(work, true) to synchronously wait for any currently
executing instance of the work item to finish, the flush_workqueue()
becomes redundant and should be removed.
This bug was identified through static analysis. To reproduce the issue
and validate the fix, I simulated the cnic PCI device in QEMU and
introduced intentional delays — such as inserting calls to ssleep()
within the cnic_delete_task() function — to increase the likelihood
of triggering the bug.
Fixes: fdf24086f4 ("cnic: Defer iscsi connection cleanup")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cca7b1cfd7b8a0eff2a3510c5e0f10efe8fa3758 ]
The expression `(conf->instr_type == 64) << iq_no` can overflow because
`iq_no` may be as high as 64 (`CN23XX_MAX_RINGS_PER_PF`). Casting the
operand to `u64` ensures correct 64-bit arithmetic.
Fixes: f21fb3ed36 ("Add support of Cavium Liquidio ethernet adapters")
Signed-off-by: Alexey Nepomnyashih <sdl@nppct.ru>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3fbfe251cc9f6d391944282cdb9bcf0bd02e01f8 ]
This reverts commit d24341740fe48add8a227a753e68b6eedf4b385a.
It causes errors when trying to configure QoS, as well as
loss of L2 connectivity (on multi-host devices).
Reported-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/20250910170011.70528106@kernel.org
Fixes: d24341740fe4 ("net/mlx5e: Update and set Xon/Xoff upon port speed set")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0aeb54ac4cd5cf8f60131b4d9ec0b6dc9c27b20d ]
Normally we wait for the socket to buffer up the whole record
before we service it. If the socket has a tiny buffer, however,
we read out the data sooner, to prevent connection stalls.
Make sure that we abort the connection when we find out late
that the record is actually invalid. Retrying the parsing is
fine in itself but since we copy some more data each time
before we parse we can overflow the allocated skb space.
Constructing a scenario in which we're under pressure without
enough data in the socket to parse the length upfront is quite
hard. syzbot figured out a way to do this by serving us the header
in small OOB sends, and then filling in the recvbuf with a large
normal send.
Make sure that tls_rx_msg_size() aborts strp, if we reach
an invalid record there's really no way to recover.
Reported-by: Lee Jones <lee@kernel.org>
Fixes: 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250917002814.1743558-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8ba87f04ca9cdec06776ce92dce1395026dc3bb ]
Unlike IPv4, IPv6 routing strictly requires the source address to be valid
on the outgoing interface. If the NS target is set to a remote VLAN interface,
and the source address is also configured on a VLAN over a bond interface,
setting the oif to the bond device will fail to retrieve the correct
destination route.
Fix this by not setting the oif to the bond device when retrieving the NS
target destination. This allows the correct destination device (the VLAN
interface) to be determined, so that bond_verify_device_path can return the
proper VLAN tags for sending NS messages.
Reported-by: David Wilder <wilder@us.ibm.com>
Closes: https://lore.kernel.org/netdev/aGOKggdfjv0cApTO@fedora/
Suggested-by: Jay Vosburgh <jv@jvosburgh.net>
Tested-by: David Wilder <wilder@us.ibm.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Fixes: 4e24be018e ("bonding: add new parameter ns_targets")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250916080127.430626-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b4be64fd9fec16418f365c2d8e47a7566e9eba5 ]
The function mlx5_uplink_netdev_get() gets the uplink netdevice
pointer from mdev->mlx5e_res.uplink_netdev. However, the netdevice can
be removed and its pointer cleared when unbound from the mlx5_core.eth
driver. This results in a NULL pointer, causing a kernel panic.
BUG: unable to handle page fault for address: 0000000000001300
at RIP: 0010:mlx5e_vport_rep_load+0x22a/0x270 [mlx5_core]
Call Trace:
<TASK>
mlx5_esw_offloads_rep_load+0x68/0xe0 [mlx5_core]
esw_offloads_enable+0x593/0x910 [mlx5_core]
mlx5_eswitch_enable_locked+0x341/0x420 [mlx5_core]
mlx5_devlink_eswitch_mode_set+0x17e/0x3a0 [mlx5_core]
devlink_nl_eswitch_set_doit+0x60/0xd0
genl_family_rcv_msg_doit+0xe0/0x130
genl_rcv_msg+0x183/0x290
netlink_rcv_skb+0x4b/0xf0
genl_rcv+0x24/0x40
netlink_unicast+0x255/0x380
netlink_sendmsg+0x1f3/0x420
__sock_sendmsg+0x38/0x60
__sys_sendto+0x119/0x180
do_syscall_64+0x53/0x1d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Ensure the pointer is valid before use by checking it for NULL. If it
is valid, immediately call netdev_hold() to take a reference, and
preventing the netdevice from being freed while it is in use.
Fixes: 7a9fb35e8c ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1757939074-617281-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d88e198dcaf700e33c2a4c796af9434652c56e7 ]
When LAG is configured, functions (PF,VF,SF) can utilize the maximum
aggregated link speed for transmission. Currently the aggregated link
speed is not considered.
Hence, improve it to use the aggregated link speed by referring to the
physical port's upper bonding device when LAG is configured.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Stable-dep-of: 6b4be64fd9fe ("net/mlx5e: Harden uplink netdev access against device unbind")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e37084a26070c546ae7961ee135bbfb15fbe13fd ]
i40e has a feature which writes to memory location last descriptor
successfully sent. Memory barrier in i40e_clean_tx_irq() was used to
avoid forward-reading descriptor fields in case DD bit was not set.
Having mentioned feature in place implies that such situation will not
happen as we know in advance how many descriptors HW has dealt with.
Besides, this barrier placement was wrong. Idea is to have this
protection *after* reading DD bit from HW descriptor, not before.
Digging through git history showed me that indeed barrier was before DD
bit check, anyways the commit introducing i40e_get_head() should have
wiped it out altogether.
Also, there was one commit doing s/read_barrier_depends/smp_rmb when get
head feature was already in place, but it was only theoretical based on
ixgbe experiences, which is different in these terms as that driver has
to read DD bit from HW descriptor.
Fixes: 1943d8ba95 ("i40e/i40evf: enable hardware feature head write back")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 93ab4881a4e2b9657bdce4b8940073bfb4ed5eab ]
`netif_rx()` already increments `rx_dropped` core stat when it fails.
The driver was also updating `ndev->stats.rx_dropped` in the same path.
Since both are reported together via `ip -s -s` command, this resulted
in drops being counted twice in user-visible stats.
Keep the driver update on `if (unlikely(!skb))`, but skip it after
`netif_rx()` errors.
Fixes: caf586e5f2 ("net: add a core netdev->rx_dropped counter")
Signed-off-by: Yeounsu Moon <yyyynoom@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250913060135.35282-3-yyyynoom@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b86418beade11d45540a2d20c4ec1128849b6c27 ]
This patch fixes several issues in the error reporting of the MPTCP sockopt
selftest:
1. Fix diff not printed: The error messages for counter mismatches had
the actual difference ('diff') as argument, but it was missing in the
format string. Displaying it makes the debugging easier.
2. Fix variable usage: The error check for 'mptcpi_bytes_acked' incorrectly
used 'ret2' (sent bytes) for both the expected value and the difference
calculation. It now correctly uses 'ret' (received bytes), which is the
expected value for bytes_acked.
3. Fix off-by-one in diff: The calculation for the 'mptcpi_rcv_delta' diff
was 's.mptcpi_rcv_delta - ret', which is off-by-one. It has been
corrected to 's.mptcpi_rcv_delta - (ret + 1)' to match the expected
value in the condition above it.
Fixes: 5dcff89e14 ("selftests: mptcp: explicitly tests aggregate counters")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-pm-uspace-deny_join_id0-v1-5-40171884ade8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92da495cb65719583aa06bc946aeb18a10e1e6e2 ]
When TFO is used, the check to see if the 'C' flag (deny join id0) was
set was bypassed.
This flag can be set when TFO is used, so the check should also be done
when TFO is used.
Note that the set_fully_established label is also used when a 4th ACK is
received. In this case, deny_join_id0 will not be set.
Fixes: dfc8d06030 ("mptcp: implement delayed seq generation for passive fastopen")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-pm-uspace-deny_join_id0-v1-4-40171884ade8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96939cec994070aa5df852c10fad5fc303a97ea3 ]
When a SYN containing the 'C' flag (deny join id0) was received, this
piece of information was not propagated to the path-manager.
Even if this flag is mainly set on the server side, a client can also
tell the server it cannot try to establish new subflows to the client's
initial IP address and port. The server's PM should then record such
info when received, and before sending events about the new connection.
Fixes: df377be387 ("mptcp: add deny_join_id0 in mptcp_options_received")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-pm-uspace-deny_join_id0-v1-1-40171884ade8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35ae4e86292ef7dfe4edbb9942955c884e984352 ]
After commit 5c3bf6cba791 ("bonding: assign random address if device
address is same as bond"), bonding will erroneously randomize the MAC
address of the first interface added to the bond if fail_over_mac =
follow.
Correct this by additionally testing for the bond being empty before
randomizing the MAC.
Fixes: 5c3bf6cba791 ("bonding: assign random address if device address is same as bond")
Reported-by: Qiuling Ren <qren@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250910024336.400253-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56c0a2a9ddc2f5b5078c5fb0f81ab76bbc3d4c37 ]
In the protection override dump path, the firmware can return far too
many GRC elements, resulting in attempting to write past the end of the
previously-kmalloc'ed dump buffer.
This will result in a kernel panic with reason:
BUG: unable to handle kernel paging request at ADDRESS
where "ADDRESS" is just past the end of the protection override dump
buffer. The start address of the buffer is:
p_hwfn->cdev->dbg_features[DBG_FEATURE_PROTECTION_OVERRIDE].dump_buf
and the size of the buffer is buf_size in the same data structure.
The panic can be arrived at from either the qede Ethernet driver path:
[exception RIP: qed_grc_dump_addr_range+0x108]
qed_protection_override_dump at ffffffffc02662ed [qed]
qed_dbg_protection_override_dump at ffffffffc0267792 [qed]
qed_dbg_feature at ffffffffc026aa8f [qed]
qed_dbg_all_data at ffffffffc026b211 [qed]
qed_fw_fatal_reporter_dump at ffffffffc027298a [qed]
devlink_health_do_dump at ffffffff82497f61
devlink_health_report at ffffffff8249cf29
qed_report_fatal_error at ffffffffc0272baf [qed]
qede_sp_task at ffffffffc045ed32 [qede]
process_one_work at ffffffff81d19783
or the qedf storage driver path:
[exception RIP: qed_grc_dump_addr_range+0x108]
qed_protection_override_dump at ffffffffc068b2ed [qed]
qed_dbg_protection_override_dump at ffffffffc068c792 [qed]
qed_dbg_feature at ffffffffc068fa8f [qed]
qed_dbg_all_data at ffffffffc0690211 [qed]
qed_fw_fatal_reporter_dump at ffffffffc069798a [qed]
devlink_health_do_dump at ffffffff8aa95e51
devlink_health_report at ffffffff8aa9ae19
qed_report_fatal_error at ffffffffc0697baf [qed]
qed_hw_err_notify at ffffffffc06d32d7 [qed]
qed_spq_post at ffffffffc06b1011 [qed]
qed_fcoe_destroy_conn at ffffffffc06b2e91 [qed]
qedf_cleanup_fcport at ffffffffc05e7597 [qedf]
qedf_rport_event_handler at ffffffffc05e7bf7 [qedf]
fc_rport_work at ffffffffc02da715 [libfc]
process_one_work at ffffffff8a319663
Resolve this by clamping the firmware's return value to the maximum
number of legal elements the firmware should return.
Fixes: d52c89f120 ("qed*: Utilize FW 8.37.2.0")
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Link: https://patch.msgid.link/f8e1182934aa274c18d0682a12dbaf347595469c.1757485536.git.jamie.bainbridge@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2690cb089502b80b905f2abdafd1bf2d54e1abef ]
Starting with commit c50e7475961c ("dpaa2-switch: Fix error checking in
dpaa2_switch_seed_bp()"), the probing of a second DPSW object errors out
like below.
fsl_dpaa2_switch dpsw.1: fsl_mc_driver_probe failed: -12
fsl_dpaa2_switch dpsw.1: probe with driver fsl_dpaa2_switch failed with error -12
The aforementioned commit brought to the surface the fact that seeding
buffers into the buffer pool destined for control traffic is not
successful and an access violation recoverable error can be seen in the
MC firmware log:
[E, qbman_rec_isr:391, QBMAN] QBMAN recoverable event 0x1000000
This happens because the driver incorrectly used the ID of the DPBP
object instead of the hardware buffer pool ID when trying to release
buffers into it.
This is because any DPSW object uses two buffer pools, one managed by
the Linux driver and destined for control traffic packet buffers and the
other one managed by the MC firmware and destined only for offloaded
traffic. And since the buffer pool managed by the MC firmware does not
have an external facing DPBP equivalent, any subsequent DPBP objects
created after the first DPSW will have a DPBP id different to the
underlying hardware buffer ID.
The issue was not caught earlier because these two numbers can be
identical when all DPBP objects are created before the DPSW objects are.
This is the case when the DPL file is used to describe the entire DPAA2
object layout and objects are created at boot time and it's also true
for the first DPSW being created dynamically using ls-addsw.
Fix this by using the buffer pool ID instead of the DPBP id when
releasing buffers into the pool.
Fixes: 2877e4f7e1 ("staging: dpaa2-switch: setup buffer pool and RX path rings")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20250910144825.2416019-1-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ebf70cf181651fe3f2e44e95e7e5073d594c9c0 ]
When register_virtio_device() fails in virtio_uml_probe(),
the code sets vu_dev->registered = 1 even though
the device was not successfully registered.
This can lead to use-after-free or other issues.
Fixes: 04e5b1fb01 ("um: virtio: Remove device on disconnect")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b62fd63ade7cb573b114972ef8f9fa505be8d74a ]
The offset for an extref item's key is not the object ID of the parent
dir, otherwise we would not need the extref item and would use plain ref
items. Instead the offset is the result of a hash computation that uses
the object ID of the parent dir and the name associated to the entry.
So fix this by setting the key offset at replay_one_name() to be the
result of calling btrfs_extref_hash().
Fixes: 725af92a62 ("btrfs: Open-code name_in_log_ref in replay_one_name")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79f919a89c9d06816dbdbbd168fa41d27411a7f9 ]
A hung task can occur during [1] LTP cgroup testing when repeatedly
mounting/unmounting perf_event and net_prio controllers with
systemd.unified_cgroup_hierarchy=1. The hang manifests in
cgroup_lock_and_drain_offline() during root destruction.
Related case:
cgroup_fj_function_perf_event cgroup_fj_function.sh perf_event
cgroup_fj_function_net_prio cgroup_fj_function.sh net_prio
Call Trace:
cgroup_lock_and_drain_offline+0x14c/0x1e8
cgroup_destroy_root+0x3c/0x2c0
css_free_rwork_fn+0x248/0x338
process_one_work+0x16c/0x3b8
worker_thread+0x22c/0x3b0
kthread+0xec/0x100
ret_from_fork+0x10/0x20
Root Cause:
CPU0 CPU1
mount perf_event umount net_prio
cgroup1_get_tree cgroup_kill_sb
rebind_subsystems // root destruction enqueues
// cgroup_destroy_wq
// kill all perf_event css
// one perf_event css A is dying
// css A offline enqueues cgroup_destroy_wq
// root destruction will be executed first
css_free_rwork_fn
cgroup_destroy_root
cgroup_lock_and_drain_offline
// some perf descendants are dying
// cgroup_destroy_wq max_active = 1
// waiting for css A to die
Problem scenario:
1. CPU0 mounts perf_event (rebind_subsystems)
2. CPU1 unmounts net_prio (cgroup_kill_sb), queuing root destruction work
3. A dying perf_event CSS gets queued for offline after root destruction
4. Root destruction waits for offline completion, but offline work is
blocked behind root destruction in cgroup_destroy_wq (max_active=1)
Solution:
Split cgroup_destroy_wq into three dedicated workqueues:
cgroup_offline_wq – Handles CSS offline operations
cgroup_release_wq – Manages resource release
cgroup_free_wq – Performs final memory deallocation
This separation eliminates blocking in the CSS free path while waiting for
offline operations to complete.
[1] https://github.com/linux-test-project/ltp/blob/master/runtest/controllers
Fixes: 334c3679ec ("cgroup: reimplement rebind_subsystems() using cgroup_apply_control() and friends")
Reported-by: Gao Yingjie <gaoyingjie@uniontech.com>
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Suggested-by: Teju Heo <tj@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1dfcdd30140c031ae091868fb5bed084132bca1 ]
As described in the added code comment, a reference to .exit.text is ok
for drivers registered via platform_driver_probe(). Make this explicit
to prevent the following section mismatch warning
WARNING: modpost: drivers/pcmcia/omap_cf: section mismatch in reference: omap_cf_driver+0x4 (section: .data) -> omap_cf_remove (section: .exit.text)
that triggers on an omap1_defconfig + CONFIG_OMAP_CF=m build.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e2f3213e85eba00acb4cfe6d71647892d63c3a1 ]
Currently the S1G capability element is not taken into account
for the scan_ies_len, which leads to a buffer length validation
failure in ieee80211_prep_hw_scan() and subsequent WARN in
__ieee80211_start_scan(). This prevents hw scanning from functioning.
To fix ensure we accommodate for the S1G capability length.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250826085437.3493-1-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aea3493246c474bc917d124d6fb627663ab6bef0 ]
The ALSA HwDep character device of the firewire-motu driver incorrectly
returns EPOLLOUT in poll(2), even though the driver implements no operation
for write(2). This misleads userspace applications to believe write() is
allowed, potentially resulting in unnecessarily wakeups.
This issue dates back to the driver's initial code added by a commit
71c3797779 ("ALSA: firewire-motu: add hwdep interface"), and persisted
when POLLOUT was updated to EPOLLOUT by a commit a9a08845e9 ('vfs: do
bulk POLL* -> EPOLL* replacement("").').
This commit fixes the bug.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://patch.msgid.link/20250829233749.366222-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfa7b7659757f8d0fc4914429efa90d0d2577dd7 ]
for_each_set_bit() expects size to be in bits, not bytes. The abox mask
iteration uses bytes, but it works by coincidence, because the local
variable holding the mask is unsigned long, and the mask only ever has
bit 2 as the highest bit. Using a smaller type could lead to subtle and
very hard to track bugs.
Fixes: 62afef2811 ("drm/i915/rkl: RKL uses ABOX0 for pixel transfers")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: stable@vger.kernel.org # v5.9+
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250905104149.1144751-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 7ea3baa6efe4bb93d11e1c0e6528b1468d7debf6)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
[ adapted struct intel_display *display parameters to struct drm_i915_private *dev_priv ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7838fb5f119191403560eca2e23613380c0e425e ]
Commit b61badd20b44 ("drm/amdgpu: fix usage slab after free")
reordered when amdgpu_fence_driver_sw_fini() was called after
that patch, amdgpu_fence_driver_sw_fini() effectively became
a no-op as the sched entities we never freed because the
ring pointers were already set to NULL. Remove the NULL
setting.
Reported-by: Lin.Cao <lincao12@amd.com>
Cc: Vitaly Prosyak <vitaly.prosyak@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Fixes: b61badd20b44 ("drm/amdgpu: fix usage slab after free")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a525fa37aac36c4591cc8b07ae8957862415fbd5)
Cc: stable@vger.kernel.org
[ Adapt to conditional check ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ea25274ebaf2f6be8be374633b2ed8348ec0e70 upstream.
reset_gpio is claimed in mdiobus_register_device(), but it is not
released in mdiobus_unregister_device(). It is instead only
released when the whole MDIO bus is unregistered.
When a device uses the reset_gpio property, it becomes impossible
to unregister it and register it again, because the GPIO remains
claimed.
This patch resolves that issue.
Fixes: bafbdd527d ("phylib: Add device reset GPIO support") # see notes
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Cc: Csókás Bence <csokas.bence@prolan.hu>
[ csokas.bence: Resolve rebase conflict and clarify msg ]
Signed-off-by: Buday Csaba <buday.csaba@prolan.hu>
Link: https://patch.msgid.link/20250807135449.254254-2-csokas.bence@prolan.hu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[ csokas.bence: Use the v1 patch on top of 6.6, as specified in notes ]
Signed-off-by: Bence Csókás <csokas.bence@prolan.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c8b5b7c5da7d0c31c9b7190b4a7bba5281fc4780 upstream.
The Client send malformed smb2 negotiate request. ksmbd return error
response. Subsequently, the client can send smb2 session setup even
thought conn->preauth_info is not allocated.
This patch add KSMBD_SESS_NEED_SETUP status of connection to ignore
session setup request if smb2 negotiate phase is not complete.
Cc: stable@vger.kernel.org
Tested-by: Steve French <stfrench@microsoft.com>
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-26505
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Jan Alexander Preissler <akendo@akendo.eu>
Signed-off-by: Sujana Subramaniam <sujana.subramaniam@sap.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bca065733afd1e3a89a02f05ffe14e966cd5f78e upstream.
Make sure to drop the references taken to the PMC OF node and device by
of_parse_phandle() and of_find_device_by_node() during probe.
Note the holding a reference to the PMC device does not prevent the
PMC regmap from going away (e.g. if the PMC driver is unbound) so there
is no need to keep the reference.
Fixes: 2d10214872 ("phy: tegra: xusb: Add wake/sleepwalk for Tegra210")
Cc: stable@vger.kernel.org # 5.14
Cc: JC Kuo <jckuo@nvidia.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250724131206.2211-2-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
