[ Upstream commit 1e89d21f8189d286f80b900e1b7cf57cb1f3037e ]
On N4100 / N4120 Gemini Lake SoCs the ISA bridge PCI device-id is 31e8
rather the 3197 found on e.g. the N4000 / N4020.
While at fix the existing GLK PCI-id table entry breaking the table
being sorted by device-id.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241114193808.110132-1-hdegoede@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3df7546fc03b8f004eee0b9e3256369f7d096685 ]
syzbot is reporting too large allocation warning at tomoyo_write_control(),
for one can write a very very long line without new line character. To fix
this warning, I use __GFP_NOWARN rather than checking for KMALLOC_MAX_SIZE,
for practically a valid line should be always shorter than 32KB where the
"too small to fail" memory-allocation rule applies.
One might try to write a valid line that is longer than 32KB, but such
request will likely fail with -ENOMEM. Therefore, I feel that separately
returning -EINVAL when a line is longer than KMALLOC_MAX_SIZE is redundant.
There is no need to distinguish over-32KB and over-KMALLOC_MAX_SIZE.
Reported-by: syzbot+7536f77535e5210a5c76@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7536f77535e5210a5c76
Reported-by: Leo Stone <leocstone@gmail.com>
Closes: https://lkml.kernel.org/r/20241216021459.178759-2-leocstone@gmail.com
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ca459eaba1bf96a8c7878de84fa8872259a01e3 ]
Currently tun checks the group permission even if the user have matched.
Besides going against the usual permission semantic, this has a
very interesting implication: if the tun group is not among the
supplementary groups of the tun user, then effectively no one can
access the tun device. CAP_SYS_ADMIN still can, but its the same as
not setting the tun ownership.
This patch relaxes the group checking so that either the user match
or the group match is enough. This avoids the situation when no one
can access the device even though the ownership is properly set.
Also I simplified the logic by removing the redundant inversions:
tun_not_capable() --> !tun_capable()
Signed-off-by: Stas Sergeev <stsp2@yandex.ru>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20241205073614.294773-1-stsp2@yandex.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b98caea39676561f22db58752551161bb36462b ]
In the original flow, the crystal_cap might be calculated as a negative
value and set as an overflow value. Therefore, we added a check to limit
the calculated crystal_cap value. Additionally, we shrank the crystal_cap
adjustment according to specific CFO.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241128055433.11851-7-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e56ad45e991128bf4db160b75a1d9f647a341d8f ]
Source --> DP2.1 MST hub --> DP1.4/2.1 monitor
When change from DP1.4 to DP2.1 from monitor manual, modes higher than
4k120 are all cutoff by mode validation. Switch back to DP1.4 gets all
the modes up to 4k240 available to be enabled by dsc passthrough.
[why]
Compared to DP1.4 link from hub to monitor, DP2.1 link has larger
full_pbn value that causes overflow in the process of doing conversion
from pbn to kbps.
[how]
Change the data type accordingly to fit into the data limit during
conversion calculation.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df7c8e3dde37a9d81c0613285b43600f3cc70f34 ]
The connector->eld is accessed by the .get_eld() callback. This access
can collide with the drm_edid_to_eld() updating the data at the same
time. Add drm_connector.eld_mutex to protect the data from concurrenct
access. Individual drivers are not updated (to reduce possible issues
while applying the patch), maintainers are to find a best suitable way
to lock that mutex while accessing the ELD data.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241206-drm-connector-eld-mutex-v2-1-c9bce1ee8bea@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d6f83df8ff2d5de84b50377e4f0d45e25311c7a ]
Shifting 1 << 31 on a 32-bit int causes signed integer overflow, which
leads to undefined behavior. To prevent this, cast 1 to u32 before
performing the shift, ensuring well-defined behavior.
This change explicitly avoids any potential overflow by ensuring that
the shift occurs on an unsigned 32-bit integer.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240928113608.1438087-1-visitorckw@gmail.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3c55b8ab6fe5fa2e7ab02efd36d09c39ee5022f ]
Having a fence linked to a virtio_gpu_framebuffer in the plane update
sequence would cause conflict when several planes referencing the same
framebuffer (e.g. Xorg screen covering multi-displays configured for an
extended mode) and those planes are updated concurrently. So it is needed
to allocate a fence for every plane state instead of the framebuffer.
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
[dmitry.osipenko@collabora.com: rebase, fix up, edit commit message]
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241020230803.247419-2-dmitry.osipenko@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e638072e61726cae363d48812815197a2a0e097f ]
Lockdep has a set of configs used to determine the size of the static
arrays that it uses. However, the upper limit that was initially setup
for these configs is too high (30 bit shift). This equates to several
GiB of static memory for individual symbols. Using such high values
leads to linker errors:
$ make defconfig
$ ./scripts/config -e PROVE_LOCKING --set-val LOCKDEP_BITS 30
$ make olddefconfig all
[...]
ld: kernel image bigger than KERNEL_IMAGE_SIZE
ld: section .bss VMA wraps around address space
Adjust the upper limits to the maximum values that avoid these issues.
The need for anything more, likely points to a problem elsewhere. Note
that LOCKDEP_CHAINS_BITS was intentionally left out as its upper limit
had a different symptom and has already been fixed [1].
Reported-by: J. R. Okajima <hooanon05g@gmail.com>
Closes: https://lore.kernel.org/all/30795.1620913191@jrobl/ [1]
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20241024183631.643450-2-cmllamas@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 108ad0999085df2366dd9ef437573955cb3f5586 ]
When steal time exceeds the measured delta when updating clock_task, we
currently try to catch up the excess in future updates.
However, this results in inaccurate run times for the future things using
clock_task, in some situations, as they end up getting additional steal
time that did not actually happen.
This is because there is a window between reading the elapsed time in
update_rq_clock() and sampling the steal time in update_rq_clock_task().
If the VCPU gets preempted between those two points, any additional
steal time is accounted to the outgoing task even though the calculated
delta did not actually contain any of that "stolen" time.
When this race happens, we can end up with steal time that exceeds the
calculated delta, and the previous code would try to catch up that excess
steal time in future clock updates, which is given to the next,
incoming task, even though it did not actually have any time stolen.
This behavior is particularly bad when steal time can be very long,
which we've seen when trying to extend steal time to contain the duration
that the host was suspended [0]. When this happens, clock_task stays
frozen, during which the running task stays running for the whole
duration, since its run time doesn't increase.
However the race can happen even under normal operation.
Ideally we would read the elapsed cpu time and the steal time atomically,
to prevent this race from happening in the first place, but doing so
is non-trivial.
Since the time between those two points isn't otherwise accounted anywhere,
neither to the outgoing task nor the incoming task (because the "end of
outgoing task" and "start of incoming task" timestamps are the same),
I would argue that the right thing to do is to simply drop any excess steal
time, in order to prevent these issues.
[0] https://lore.kernel.org/kvm/20240820043543.837914-1-suleiman@google.com/
Signed-off-by: Suleiman Souhlal <suleiman@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241118043745.1857272-1-suleiman@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a4730b325aaa48f7a5d5ba97aff0a955e2d9cec ]
This BUG_ON is meant to catch backref cache problems, but these can
arise from either bugs in the backref cache or corruption in the extent
tree. Fix it to be a proper error.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5324c4e10e9c2ce307a037e904c0d9671d7137d9 ]
A data race occurs when the function `insert_ordered_extent_file_extent()`
and the function `btrfs_inode_safe_disk_i_size_write()` are executed
concurrently. The function `insert_ordered_extent_file_extent()` is not
locked when reading inode->disk_i_size, causing
`btrfs_inode_safe_disk_i_size_write()` to cause data competition when
writing inode->disk_i_size, thus affecting the value of `modify_tree`.
The specific call stack that appears during testing is as follows:
============DATA_RACE============
btrfs_drop_extents+0x89a/0xa060 [btrfs]
insert_reserved_file_extent+0xb54/0x2960 [btrfs]
insert_ordered_extent_file_extent+0xff5/0x1760 [btrfs]
btrfs_finish_one_ordered+0x1b85/0x36a0 [btrfs]
btrfs_finish_ordered_io+0x37/0x60 [btrfs]
finish_ordered_fn+0x3e/0x50 [btrfs]
btrfs_work_helper+0x9c9/0x27a0 [btrfs]
process_scheduled_works+0x716/0xf10
worker_thread+0xb6a/0x1190
kthread+0x292/0x330
ret_from_fork+0x4d/0x80
ret_from_fork_asm+0x1a/0x30
============OTHER_INFO============
btrfs_inode_safe_disk_i_size_write+0x4ec/0x600 [btrfs]
btrfs_finish_one_ordered+0x24c7/0x36a0 [btrfs]
btrfs_finish_ordered_io+0x37/0x60 [btrfs]
finish_ordered_fn+0x3e/0x50 [btrfs]
btrfs_work_helper+0x9c9/0x27a0 [btrfs]
process_scheduled_works+0x716/0xf10
worker_thread+0xb6a/0x1190
kthread+0x292/0x330
ret_from_fork+0x4d/0x80
ret_from_fork_asm+0x1a/0x30
=================================
The main purpose of the check of the inode's disk_i_size is to avoid
taking write locks on a btree path when we have a write at or beyond
EOF, since in these cases we don't expect to find extent items in the
root to drop. However if we end up taking write locks due to a data
race on disk_i_size, everything is still correct, we only add extra
lock contention on the tree in case there's concurrency from other tasks.
If the race causes us to not take write locks when we actually need them,
then everything is functionally correct as well, since if we find out we
have extent items to drop and we took read locks (modify_tree set to 0),
we release the path and retry again with write locks.
Since this data race does not affect the correctness of the function,
it is a harmless data race, use data_race() to check inode->disk_i_size.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Hao-ran Zheng <zhenghaoran154@gmail.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a88c26bb8e04ee5f2678225c0130a5fbc08eef85 ]
exrl is present in all machines currently supported, therefore prefer
it over ex. This saves one instruction and doesn't need an additional
register to hold the address of the target instruction.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 543841d1806029889c2f69f040e88b247aba8e22 ]
Zbigniew mentioned at Linux Plumber's that systemd is interested in
switching to execveat() for service execution, but can't, because the
contents of /proc/pid/comm are the file descriptor which was used,
instead of the path to the binary[1]. This makes the output of tools like
top and ps useless, especially in a world where most fds are opened
CLOEXEC so the number is truly meaningless.
When the filename passed in is empty (e.g. with AT_EMPTY_PATH), use the
dentry's filename for "comm" instead of using the useless numeral from
the synthetic fdpath construction. This way the actual exec machinery
is unchanged, but cosmetically the comm looks reasonable to admins
investigating things.
Instead of adding TASK_COMM_LEN more bytes to bprm, use one of the unused
flag bits to indicate that we need to set "comm" from the dentry.
Suggested-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Suggested-by: Tycho Andersen <tandersen@netflix.com>
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://github.com/uapi-group/kernel-features#set-comm-field-before-exec [1]
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Tested-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3b8b80e993766dc96d1a1c01c62f5d15fafc79b9 upstream.
GCC changed the default C standard dialect from gnu17 to gnu23,
which should not have impacted the kernel because it explicitly requests
the gnu11 standard in the main Makefile. However, there are certain
places in the s390 code that use their own CFLAGS without a '-std='
value, which break with this dialect change because of the kernel's own
definitions of bool, false, and true conflicting with the C23 reserved
keywords.
include/linux/stddef.h:11:9: error: cannot use keyword 'false' as enumeration constant
11 | false = 0,
| ^~~~~
include/linux/stddef.h:11:9: note: 'false' is a keyword with '-std=c23' onwards
include/linux/types.h:35:33: error: 'bool' cannot be defined via 'typedef'
35 | typedef _Bool bool;
| ^~~~
include/linux/types.h:35:33: note: 'bool' is a keyword with '-std=c23' onwards
Add '-std=gnu11' to the decompressor and purgatory CFLAGS to eliminate
these errors and make the C standard version of these areas match the
rest of the kernel.
Cc: stable@vger.kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20250122-s390-fix-std-for-gcc-15-v1-1-8b00cadee083@kernel.org
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0f038104fa37380e2a725e669508e43d0c503e9 upstream.
There is a recent ML report that mounting a large fs backed by hardware
RAID56 controller (with one device missing) took too much time, and
systemd seems to kill the mount attempt.
In that case, the only error message is:
BTRFS error (device sdj): open_ctree failed
There is no reason on why the failure happened, making it very hard to
understand the reason.
At least output the error number (in the particular case it should be
-EINTR) to provide some clue.
Link: https://lore.kernel.org/linux-btrfs/9b9c4d2810abcca2f9f76e32220ed9a90febb235.camel@scientia.org/
Reported-by: Christoph Anton Mitterer <calestyo@scientia.org>
Cc: stable@vger.kernel.org
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1378ffec30367233152b7dbf4fa6a25ee98585d1 upstream.
The proble is on the first line:
if (jpeg->pd_dev[i] && !pm_runtime_suspended(jpeg->pd_dev[i]))
If jpeg->pd_dev[i] is an error pointer, then passing it to
pm_runtime_suspended() will lead to an Oops. The other conditions
check for both error pointers and NULL, but it would be more clear to
use the IS_ERR_OR_NULL() check for that.
Fixes: fd0af4cd35da ("media: imx-jpeg: Ensure power suppliers be suspended before detach them")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c79a39dc8d060b9e64e8b0fa9d245d44befeefbe upstream.
On a board running ntpd and gpsd, I'm seeing a consistent use-after-free
in sys_exit() from gpsd when rebooting:
pps pps1: removed
------------[ cut here ]------------
kobject: '(null)' (00000000db4bec24): is not initialized, yet kobject_put() is being called.
WARNING: CPU: 2 PID: 440 at lib/kobject.c:734 kobject_put+0x120/0x150
CPU: 2 UID: 299 PID: 440 Comm: gpsd Not tainted 6.11.0-rc6-00308-gb31c44928842 #1
Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : kobject_put+0x120/0x150
lr : kobject_put+0x120/0x150
sp : ffffffc0803d3ae0
x29: ffffffc0803d3ae0 x28: ffffff8042dc9738 x27: 0000000000000001
x26: 0000000000000000 x25: ffffff8042dc9040 x24: ffffff8042dc9440
x23: ffffff80402a4620 x22: ffffff8042ef4bd0 x21: ffffff80405cb600
x20: 000000000008001b x19: ffffff8040b3b6e0 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 696e6920746f6e20
x14: 7369203a29343263 x13: 205d303434542020 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
kobject_put+0x120/0x150
cdev_put+0x20/0x3c
__fput+0x2c4/0x2d8
____fput+0x1c/0x38
task_work_run+0x70/0xfc
do_exit+0x2a0/0x924
do_group_exit+0x34/0x90
get_signal+0x7fc/0x8c0
do_signal+0x128/0x13b4
do_notify_resume+0xdc/0x160
el0_svc+0xd4/0xf8
el0t_64_sync_handler+0x140/0x14c
el0t_64_sync+0x190/0x194
---[ end trace 0000000000000000 ]---
...followed by more symptoms of corruption, with similar stacks:
refcount_t: underflow; use-after-free.
kernel BUG at lib/list_debug.c:62!
Kernel panic - not syncing: Oops - BUG: Fatal exception
This happens because pps_device_destruct() frees the pps_device with the
embedded cdev immediately after calling cdev_del(), but, as the comment
above cdev_del() notes, fops for previously opened cdevs are still
callable even after cdev_del() returns. I think this bug has always
been there: I can't explain why it suddenly started happening every time
I reboot this particular board.
In commit d953e0e837 ("pps: Fix a use-after free bug when
unregistering a source."), George Spelvin suggested removing the
embedded cdev. That seems like the simplest way to fix this, so I've
implemented his suggestion, using __register_chrdev() with pps_idr
becoming the source of truth for which minor corresponds to which
device.
But now that pps_idr defines userspace visibility instead of cdev_add(),
we need to be sure the pps->dev refcount can't reach zero while
userspace can still find it again. So, the idr_remove() call moves to
pps_unregister_cdev(), and pps_idr now holds a reference to pps->dev.
pps_core: source serial1 got cdev (251:1)
<...>
pps pps1: removed
pps_core: unregistering pps1
pps_core: deallocating pps1
Fixes: d953e0e837 ("pps: Fix a use-after free bug when unregistering a source.")
Cc: stable@vger.kernel.org
Signed-off-by: Calvin Owens <calvin@wbinvd.org>
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://lore.kernel.org/r/a17975fd5ae99385791929e563f72564edbcf28f.1731383727.git.calvin@wbinvd.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7378aeb664e5ebc396950b36a1f2dedf5aabec20 upstream.
In the rproc_alloc() function, on error, put_device(&rproc->dev) is
called, leading to the call of the rproc_type_release() function.
An error can occurs before ida_alloc is called.
In such case in rproc_type_release(), the condition (rproc->index >= 0) is
true as rproc->index has been initialized to 0.
ida_free() is called reporting a warning:
[ 4.181906] WARNING: CPU: 1 PID: 24 at lib/idr.c:525 ida_free+0x100/0x164
[ 4.186378] stm32-display-dsi 5a000000.dsi: Fixed dependency cycle(s) with /soc/dsi@5a000000/panel@0
[ 4.188854] ida_free called for id=0 which is not allocated.
[ 4.198256] mipi-dsi 5a000000.dsi.0: Fixed dependency cycle(s) with /soc/dsi@5a000000
[ 4.203556] Modules linked in: panel_orisetech_otm8009a dw_mipi_dsi_stm(+) gpu_sched dw_mipi_dsi stm32_rproc stm32_crc32 stm32_ipcc(+) optee(+)
[ 4.224307] CPU: 1 UID: 0 PID: 24 Comm: kworker/u10:0 Not tainted 6.12.0 #442
[ 4.231481] Hardware name: STM32 (Device Tree Support)
[ 4.236627] Workqueue: events_unbound deferred_probe_work_func
[ 4.242504] Call trace:
[ 4.242522] unwind_backtrace from show_stack+0x10/0x14
[ 4.250218] show_stack from dump_stack_lvl+0x50/0x64
[ 4.255274] dump_stack_lvl from __warn+0x80/0x12c
[ 4.260134] __warn from warn_slowpath_fmt+0x114/0x188
[ 4.265199] warn_slowpath_fmt from ida_free+0x100/0x164
[ 4.270565] ida_free from rproc_type_release+0x38/0x60
[ 4.275832] rproc_type_release from device_release+0x30/0xa0
[ 4.281601] device_release from kobject_put+0xc4/0x294
[ 4.286762] kobject_put from rproc_alloc.part.0+0x208/0x28c
[ 4.292430] rproc_alloc.part.0 from devm_rproc_alloc+0x80/0xc4
[ 4.298393] devm_rproc_alloc from stm32_rproc_probe+0xd0/0x844 [stm32_rproc]
[ 4.305575] stm32_rproc_probe [stm32_rproc] from platform_probe+0x5c/0xbc
Calling ida_alloc earlier in rproc_alloc ensures that the rproc->index is
properly set.
Fixes: 08333b911f ("remoteproc: Directly use ida_alloc()/free()")
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241122175127.2188037-1-arnaud.pouliquen@foss.st.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
