[ Upstream commit 73cb3a35f94db723c0211ad099bce55b2155e3f0 ]
Two changes were made in link retraining logic independent of each other.
The commit e7e3975636 ("PCI/ASPM: Avoid link retraining race") added a
check to pcie_retrain_link() to ensure no Link Training is currently active
to address the Implementation Note in PCIe r6.1 sec 7.5.3.7. At that time
pcie_wait_for_retrain() only checked for the Link Training (LT) bit being
cleared.
The commit 680e9c47a2 ("PCI: Add support for polling DLLLA to
pcie_retrain_link()") generalized pcie_wait_for_retrain() into
pcie_wait_for_link_status() which can wait either for LT or the Data Link
Layer Link Active (DLLLA) bit with 'use_lt' argument and supporting waiting
for either cleared or set using 'active' argument.
In the merge commit 1abb473903 ("Merge branch 'pci/enumeration'"), those
two divergent branches converged. The merge changed LT bit checking added
in the commit e7e3975636 ("PCI/ASPM: Avoid link retraining race") to now
wait for completion of any ongoing Link Training using DLLLA bit being set
if 'use_lt' is false.
When 'use_lt' is false, the pseudo-code steps of what occurs in
pcie_retrain_link():
1. Wait for DLLLA==1
2. Trigger link to retrain
3. Wait for DLLLA==1
Step 3 waits for the link to come up from the retraining triggered by Step
2. As Step 1 is supposed to wait for any ongoing retraining to end, using
DLLLA also for it does not make sense because link training being active is
still indicated using LT bit, not with DLLLA.
Correct the pcie_wait_for_link_status() parameters in Step 1 to only wait
for LT==0 to ensure there is no ongoing Link Training.
This only impacts the Target Speed quirk, which is the only case where
waiting for DLLLA bit is used. It currently works in the problematic case
by means of link training getting initiated by hardware repeatedly and
respecting the new link parameters set by the caller, which then make
training succeed and bring the link up, setting DLLLA and causing
pcie_wait_for_link_status() to return success. We are not supposed to rely
on luck and need to make sure that LT transitioned through the inactive
state though before we initiate link training by hand via RL (Retrain Link)
bit.
Fixes: 1abb473903 ("Merge branch 'pci/enumeration'")
Link: https://lore.kernel.org/r/20240423130820.43824-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38f8af2a7191e5da21c557210d810c6d0d34f6c4 ]
udf_expand_file_adinicb() is called under inode->i_rwsem and
mapping->invalidate_lock. i_rwsem is safe wrt fs reclaim,
invalidate_lock on this inode is safe as well (we hold inode reference
so reclaim will not touch it, furthermore even lockdep should not
complain as invalidate_lock is acquired from udf_evict_inode() only when
truncating inode which should not happen from fs reclaim).
Signed-off-by: Jan Kara <jack@suse.cz>
Stable-dep-of: db6754090a4f ("udf: Convert udf_expand_file_adinicb() to use a folio")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7c0e1ecee403a43abc89eb3e75672b01ff2ece9 ]
The current implementation of the fpga region assumes that the low-level
module registers a driver for the parent device and uses its owner pointer
to take the module's refcount. This approach is problematic since it can
lead to a null pointer dereference while attempting to get the region
during programming if the parent device does not have a driver.
To address this problem, add a module owner pointer to the fpga_region
struct and use it to take the module's refcount. Modify the functions for
registering a region to take an additional owner module parameter and
rename them to avoid conflicts. Use the old function names for helper
macros that automatically set the module that registers the region as the
owner. This ensures compatibility with existing low-level control modules
and reduces the chances of registering a region without setting the owner.
Also, update the documentation to keep it consistent with the new interface
for registering an fpga region.
Fixes: 0fa20cdfcc ("fpga: fpga-region: device tree control for FPGA")
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Xu Yilun <yilun.xu@intel.com>
Reviewed-by: Russ Weight <russ.weight@linux.dev>
Signed-off-by: Marco Pagani <marpagan@redhat.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20240419083601.77403-1-marpagan@redhat.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf1c833f89e7c8635a28c3db15c68ead150ea712 ]
The IP core only has breaking changes when there major version changes.
Hence, only match the major number. This is also in line with the other
core ADI has upstream. The current check for erroring out
'expected_version > current_version"' is then wrong as we could just
increase the core major with breaking changes and that would go
unnoticed.
Fixes: ef04070692 ("iio: adc: adi-axi-adc: add support for AXI ADC IP core")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240419-ad9467-new-features-v1-2-3e7628ff6d5e@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb42191f85c389bf816373d25c3e4c94045cf4ff ]
Convert the driver to use the new IIO backend framework. The device
functionality is expected to be the same (meaning no added or removed
features).
Also note this patch effectively breaks ABI and that's needed so we can
properly support this device and add needed features making use of the
new IIO framework.
Given the lack of features (and devices supported) in the ad9467 driver
compared with the ADI out of tree version, we don't expect any user of
the upstream driver so no one should notice the ABI breakage. However,
if someone is affected by this, ADI will happily support transitioning
to the backend framework.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240210-iio-backend-v11-6-f5242a5fb42a@analog.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: cf1c833f89e7 ("iio: adc: adi-axi-adc: only error out in major version mismatch")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a97905d3e48ebe79a06d16143fbfa427c56ce5f ]
This is a Framework to handle complex IIO aggregate devices.
The typical architecture is to have one device as the frontend device which
can be "linked" against one or multiple backend devices. All the IIO and
userspace interface is expected to be registers/managed by the frontend
device which will callback into the backends when needed (to get/set
some configuration that it does not directly control).
The basic framework interface is pretty simple:
- Backends should register themselves with @devm_iio_backend_register()
- Frontend devices should get backends with @devm_iio_backend_get()
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240210-iio-backend-v11-5-f5242a5fb42a@analog.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: cf1c833f89e7 ("iio: adc: adi-axi-adc: only error out in major version mismatch")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c446288d7b31402adb454535cb2c3cbdb55bb88 ]
Export iio_dmaengine_buffer_free() and iio_dmaengine_buffer_alloc().
This is in preparation of introducing IIO backends support. This will
allow us to allocate a buffer and control it's lifetime from a device
different from the one holding the DMA firmware properties. Effectively,
in this case the struct device holding the firmware information about
the DMA channels is not the same as iio_dev->dev.parent (typical case).
While at it, namespace the buffer-dmaengine exports and update the
current user of these buffers.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240210-iio-backend-v11-4-f5242a5fb42a@analog.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: cf1c833f89e7 ("iio: adc: adi-axi-adc: only error out in major version mismatch")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit caa41c47dab7e1054f587e592ab21296e3a6781c ]
There is an unbalanced pm_runtime_enable() in etm4_probe_platform_dev()
when etm4_probe() fails. This problem can be observed via the coresight
etm4 module's (load -> unload -> load) sequence when etm4_probe() fails
in etm4_probe_platform_dev().
[ 63.379943] coresight-etm4x 7040000.etm: Unbalanced pm_runtime_enable!
[ 63.393630] coresight-etm4x 7140000.etm: Unbalanced pm_runtime_enable!
[ 63.407455] coresight-etm4x 7240000.etm: Unbalanced pm_runtime_enable!
[ 63.420983] coresight-etm4x 7340000.etm: Unbalanced pm_runtime_enable!
[ 63.420999] coresight-etm4x 7440000.etm: Unbalanced pm_runtime_enable!
[ 63.441209] coresight-etm4x 7540000.etm: Unbalanced pm_runtime_enable!
[ 63.454689] coresight-etm4x 7640000.etm: Unbalanced pm_runtime_enable!
[ 63.474982] coresight-etm4x 7740000.etm: Unbalanced pm_runtime_enable!
This fixes the above problem - with an explicit pm_runtime_disable() call
when etm4_probe() fails during etm4_probe_platform_dev().
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: James Clark <james.clark@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: linux-acpi@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: coresight@lists.linaro.org
Fixes: 5214b56358 ("coresight: etm4x: Add support for sysreg only devices")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240314055843.2625883-2-anshuman.khandual@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcde4e97b122ac318aaa71e8bcd2857dc28a0d12 ]
This partially reverts
commit e7c304c034 ("riscv: dts: starfive: jh7110: add the node and pins configuration for tdm")
This added device tree nodes for TDM hardware that is not actually on the
VisionFive 2 board, but connected on the 40pin header. Many different extension
boards could be added on those pins, so this should be handled by overlays
instead.
This also conflicts with the I2S node which also attempts to grab GPIO 44:
starfive-jh7110-sys-pinctrl 13040000.pinctrl: pin GPIO44 already requested by 10090000.tdm; cannot claim for 120c0000.i2s
Fixes: e7c304c034 ("riscv: dts: starfive: jh7110: add the node and pins configuration for tdm")
Signed-off-by: Hannah Peuckmann <hannah.peuckmann@canonical.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e07230da0500e0919a765037c5e81583b519be2c ]
ioctl(F2FS_IOC_MOVE_RANGE) can truncate or punch hole on pinned file,
fix to disallow it.
Fixes: 5fed0be858 ("f2fs: do not allow partial truncation on pinned file")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 278a6253a673611dbc8ab72a3b34b151a8e75822 ]
compress and pinfile flag should be checked after inode lock held to
avoid race condition, fix it.
Fixes: 4c8ff7095b ("f2fs: support data compression")
Fixes: 5fed0be858 ("f2fs: do not allow partial truncation on pinned file")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1285ab300d598ead593b190af65a16f4b0843c68 ]
User space tasks can migrate between CPUs, so when tracing selected CPUs,
sideband for all CPUs is needed. In this case set the cpu map of the evsel
to all online CPUs. This may modify the original cpu map of the evlist.
Therefore, need to check whether the preceding scenario exists before
record__init_thread_masks().
Dummy tracking has been set in record__open(), move it before
record__init_thread_masks() and add a helper for unified processing.
The sys_perf_event_open invoked is as follows:
# perf --debug verbose=3 record -e cpu-clock -D 100 true
<SNIP>
Opening: cpu-clock
------------------------------------------------------------
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
config 0 (PERF_COUNT_SW_CPU_CLOCK)
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|PERIOD|IDENTIFIER
read_format ID|LOST
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid 10318 cpu 0 group_fd -1 flags 0x8 = 5
sys_perf_event_open: pid 10318 cpu 1 group_fd -1 flags 0x8 = 6
sys_perf_event_open: pid 10318 cpu 2 group_fd -1 flags 0x8 = 7
sys_perf_event_open: pid 10318 cpu 3 group_fd -1 flags 0x8 = 9
sys_perf_event_open: pid 10318 cpu 4 group_fd -1 flags 0x8 = 10
sys_perf_event_open: pid 10318 cpu 5 group_fd -1 flags 0x8 = 11
sys_perf_event_open: pid 10318 cpu 6 group_fd -1 flags 0x8 = 12
sys_perf_event_open: pid 10318 cpu 7 group_fd -1 flags 0x8 = 13
Opening: dummy:u
------------------------------------------------------------
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
config 0x9 (PERF_COUNT_SW_DUMMY)
{ sample_period, sample_freq } 1
sample_type IP|TID|TIME|IDENTIFIER
read_format ID|LOST
disabled 1
inherit 1
exclude_kernel 1
exclude_hv 1
mmap 1
comm 1
enable_on_exec 1
task 1
sample_id_all 1
exclude_guest 1
mmap2 1
comm_exec 1
ksymbol 1
bpf_event 1
------------------------------------------------------------
sys_perf_event_open: pid 10318 cpu 0 group_fd -1 flags 0x8 = 14
sys_perf_event_open: pid 10318 cpu 1 group_fd -1 flags 0x8 = 15
sys_perf_event_open: pid 10318 cpu 2 group_fd -1 flags 0x8 = 16
sys_perf_event_open: pid 10318 cpu 3 group_fd -1 flags 0x8 = 17
sys_perf_event_open: pid 10318 cpu 4 group_fd -1 flags 0x8 = 18
sys_perf_event_open: pid 10318 cpu 5 group_fd -1 flags 0x8 = 19
sys_perf_event_open: pid 10318 cpu 6 group_fd -1 flags 0x8 = 20
sys_perf_event_open: pid 10318 cpu 7 group_fd -1 flags 0x8 = 21
<SNIP>
'perf test' needs to update base-record & system-wide-dummy attr expected values
for test-record-C0:
1. Because a dummy sideband event is added to the sampling of specified
CPUs. When evlist contains evsel of different sample_type,
evlist__config() will change the default PERF_SAMPLE_ID bit to
PERF_SAMPLE_IDENTIFICATION bit.
The attr sample_type expected value of base-record and system-wide-dummy
in test-record-C0 needs to be updated.
2. The perf record uses evlist__add_aux_dummy() instead of
evlist__add_dummy() to add a dummy event.
The expected value of system-wide-dummy attr needs to be updated.
The 'perf test' result is as follows:
# ./perf test list 2>&1 | grep 'Setup struct perf_event_attr'
17: Setup struct perf_event_attr
# ./perf test 17
17: Setup struct perf_event_attr : Ok
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20230904023340.12707-4-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: 792bc998baf9 ("perf record: Fix debug message placement for test consumption")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85d2b0aa170351380be39fe4ff7973df1427fe76 ]
The sysfs_create_link() return code is marked as __must_check, but the
module_add_driver() function tries hard to not care, by assigning the
return code to a variable. When building with 'make W=1', gcc still
warns because this variable is only assigned but not used:
drivers/base/module.c: In function 'module_add_driver':
drivers/base/module.c:36:6: warning: variable 'no_warn' set but not used [-Wunused-but-set-variable]
Rework the code to properly unwind and return the error code to the
caller. My reading of the original code was that it tries to
not fail when the links already exist, so keep ignoring -EEXIST
errors.
Fixes: e17e0f51ae ("Driver core: show drivers in /sys/module/")
See-also: 4a7fb6363f ("add __must_check to device management code")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20240408080616.3911573-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a0b8c0da8d8d418cde6894a104cf74e6098ddfa ]
The arche-ctrl has two platform drivers and three of_device_id tables,
but one table is only used for the the module loader, while the other
two seem to be associated with their drivers.
This leads to a W=1 warning when the driver is built-in:
drivers/staging/greybus/arche-platform.c:623:34: error: 'arche_combined_id' defined but not used [-Werror=unused-const-variable=]
623 | static const struct of_device_id arche_combined_id[] = {
Drop the extra table and register both tables that are actually
used as the ones for the module loader instead.
Fixes: 7b62b61c75 ("greybus: arche-ctrl: Don't expose driver internals to arche-platform driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240403080702.3509288-18-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e60955dbecb97f080848a57524827e2db29c70fd ]
Sparse is not happy about misuse of bitwise types:
.../max3100.c:194:13: warning: incorrect type in assignment (different base types)
.../max3100.c:194:13: expected unsigned short [addressable] [usertype] etx
.../max3100.c:194:13: got restricted __be16 [usertype]
.../max3100.c:202:15: warning: cast to restricted __be16
Fix this by choosing proper types for the respective variables.
Fixes: 7831d56b0a ("tty: MAX3100")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240402195306.269276-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 712a1fcb38dc7cac6da63ee79a88708fbf9c45ec ]
The removal of the last MAX3100 device triggers the removal of
the driver. However, code doesn't update the respective global
variable and after insmod — rmmod — insmod cycle the kernel
oopses:
max3100 spi-PRP0001:01: max3100_probe: adding port 0
BUG: kernel NULL pointer dereference, address: 0000000000000408
...
RIP: 0010:serial_core_register_port+0xa0/0x840
...
max3100_probe+0x1b6/0x280 [max3100]
spi_probe+0x8d/0xb0
Update the actual state so next time UART driver will be registered
again.
Hugo also noticed, that the error path in the probe also affected
by having the variable set, and not cleared. Instead of clearing it
move the assignment after the successfull uart_register_driver() call.
Fixes: 7831d56b0a ("tty: MAX3100")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240402195306.269276-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77ab53371a2066fdf9b895246505f5ef5a4b5d47 ]
uart_handle_cts_change() has to be called with port lock taken,
Since we run it in a separate work, the lock may not be taken at
the time of running. Make sure that it's taken by explicitly doing
that. Without it we got a splat:
WARNING: CPU: 0 PID: 10 at drivers/tty/serial/serial_core.c:3491 uart_handle_cts_change+0xa6/0xb0
...
Workqueue: max3100-0 max3100_work [max3100]
RIP: 0010:uart_handle_cts_change+0xa6/0xb0
...
max3100_handlerx+0xc5/0x110 [max3100]
max3100_work+0x12a/0x340 [max3100]
Fixes: 7831d56b0a ("tty: MAX3100")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240402195306.269276-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aaf494cf483a1a835c44e942861429b30a00cab0 ]
It should pass a proper address (i.e. suitable for objdump or addr2line)
to get_srcline() in order to work correctly. It used to pass an address
with map__rip_2objdump() as the second argument but later it's changed
to use notes->start. It's ok in normal cases but it can be changed when
annotate_opts.full_addr is set. So let's convert the address directly
instead of using the notes->start.
Also the last argument is an IP to print symbol offset if requested. So
it should pass symbol-relative address.
Fixes: 7d18a824b5 ("perf annotate: Toggle full address <-> offset display")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240404175716.1225482-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
