commit 35cb2c6ce7da545f3b5cb1e6473ad7c3a6f08310 upstream.
The following call-chain leads to enabling interrupts in a nested interrupt
disabled section:
irq_set_vcpu_affinity()
irq_get_desc_lock()
raw_spin_lock_irqsave() <--- Disable interrupts
its_irq_set_vcpu_affinity()
guard(raw_spinlock_irq) <--- Enables interrupts when leaving the guard()
irq_put_desc_unlock() <--- Warns because interrupts are enabled
This was broken in commit b97e8a2f7130, which replaced the original
raw_spin_[un]lock() pair with guard(raw_spinlock_irq).
Fix the issue by using guard(raw_spinlock).
[ tglx: Massaged change log ]
Fixes: b97e8a2f7130 ("irqchip/gic-v3-its: Fix potential race condition in its_vlpi_prop_update()")
Signed-off-by: Tomas Krcka <krckatom@amazon.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241230150825.62894-1-krckatom@amazon.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0d62a49ab55c99e8deb4593b8d9f923de1ab5c18 upstream.
When a CPU attempts to enter low power mode, it disables the redistributor
and Group 1 interrupts and reinitializes the system registers upon wakeup.
If the transition into low power mode fails, then the CPU_PM framework
invokes the PM notifier callback with CPU_PM_ENTER_FAILED to allow the
drivers to undo the state changes.
The GIC V3 driver ignores CPU_PM_ENTER_FAILED, which leaves the GIC in
disabled state.
Handle CPU_PM_ENTER_FAILED in the same way as CPU_PM_EXIT to restore normal
operation.
[ tglx: Massage change log, add Fixes tag ]
Fixes: 3708d52fc6 ("irqchip: gic-v3: Implement CPU PM notifier")
Signed-off-by: Yogesh Lal <quic_ylal@quicinc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241220093907.2747601-1-quic_ylal@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9322d1915f9d976ee48c09d800fbd5169bc2ddcc upstream.
platform_irqchip_probe() leaks a OF node when irq_init_cb() fails. Fix it
by declaring par_np with the __free(device_node) cleanup construct.
This bug was found by an experimental static analysis tool that I am
developing.
Fixes: f8410e6265 ("irqchip: Add IRQCHIP_PLATFORM_DRIVER_BEGIN/END and IRQCHIP_MATCH helper macros")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241215033945.3414223-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cbc5dde0a461240046e8a41c43d7c3b76d5db952 upstream.
Since commit 5cbcb62dddf5 ("fs/proc: fix softlockup in __read_vmcore") the
number of softlockups in __read_vmcore at kdump time have gone down, but
they still happen sometimes.
In a memory constrained environment like the kdump image, a softlockup is
not just a harmless message, but it can interfere with things like RCU
freeing memory, causing the crashdump to get stuck.
The second loop in __read_vmcore has a lot more opportunities for natural
sleep points, like scheduling out while waiting for a data write to
happen, but apparently that is not always enough.
Add a cond_resched() to the second loop in __read_vmcore to (hopefully)
get rid of the softlockups.
Link: https://lkml.kernel.org/r/20250110102821.2a37581b@fangorn
Fixes: 5cbcb62dddf5 ("fs/proc: fix softlockup in __read_vmcore")
Signed-off-by: Rik van Riel <riel@surriel.com>
Reported-by: Breno Leitao <leitao@debian.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1f9910b41c857a892b83801feebdc7bdf38c5985 upstream.
The fence sync logic doesn't handle a fence sync across devices
as it tries to write to a channel offset from one device into
the fence bo from a different device, which won't work so well.
This patch fixes that to avoid using the sync path in the case
where the fences come from different nouveau drm devices.
This works fine on a single device as the fence bo is shared
across the devices, and mapped into each channels vma space,
the channel offsets are therefore okay to pass between sides,
so one channel can sync on the seqnos from the other by using
the offset into it's vma.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ben Skeggs <bskeggs@nvidia.com>
[ Fix compilation issue; remove version log from commit messsage.
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250109005553.623947-1-airlied@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a24009bc9be60242651a21702609381b5092459e upstream.
Transport's release() and destruct() are called when de-assigning the
vsock transport. These callbacks can touch some socket state like
sock flags, sk_state, and peer_shutdown.
Since we are reassigning the socket to a new transport during
vsock_connect(), let's reset these fields to have a clean state with
the new transport.
Fixes: c0cfa2d8a7 ("vsock: add multi-transports support")
Cc: stable@vger.kernel.org
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit df137da9d6d166e87e40980e36eb8e0bc90483ef upstream.
During virtio_transport_release() we can schedule a delayed work to
perform the closing of the socket before destruction.
The destructor is called either when the socket is really destroyed
(reference counter to zero), or it can also be called when we are
de-assigning the transport.
In the former case, we are sure the delayed work has completed, because
it holds a reference until it completes, so the destructor will
definitely be called after the delayed work is finished.
But in the latter case, the destructor is called by AF_VSOCK core, just
after the release(), so there may still be delayed work scheduled.
Refactor the code, moving the code to delete the close work already in
the do_close() to a new function. Invoke it during destruction to make
sure we don't leave any pending work.
Fixes: c0cfa2d8a7 ("vsock: add multi-transports support")
Cc: stable@vger.kernel.org
Reported-by: Hyunwoo Kim <v4bel@theori.io>
Closes: https://lore.kernel.org/netdev/Z37Sh+utS+iV3+eb@v4bel-B760M-AORUS-ELITE-AX/
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Tested-by: Hyunwoo Kim <v4bel@theori.io>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2cb7c756f605ec02ffe562fb26828e4bcc5fdfc1 upstream.
If the socket has been de-assigned or assigned to another transport,
we must discard any packets received because they are not expected
and would cause issues when we access vsk->transport.
A possible scenario is described by Hyunwoo Kim in the attached link,
where after a first connect() interrupted by a signal, and a second
connect() failed, we can find `vsk->transport` at NULL, leading to a
NULL pointer dereference.
Fixes: c0cfa2d8a7 ("vsock: add multi-transports support")
Cc: stable@vger.kernel.org
Reported-by: Hyunwoo Kim <v4bel@theori.io>
Reported-by: Wongi Lee <qwerty@theori.io>
Closes: https://lore.kernel.org/netdev/Z2LvdTTQR7dBmPb5@v4bel-B760M-AORUS-ELITE-AX/
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Hyunwoo Kim <v4bel@theori.io>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f6abafcd32f9cfc4b1a2f820ecea70773e26d423 upstream.
Some of the core functions can only be called if the transport
has been assigned.
As Michal reported, a socket might have the transport at NULL,
for example after a failed connect(), causing the following trace:
BUG: kernel NULL pointer dereference, address: 00000000000000a0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 12faf8067 P4D 12faf8067 PUD 113670067 PMD 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 15 UID: 0 PID: 1198 Comm: a.out Not tainted 6.13.0-rc2+
RIP: 0010:vsock_connectible_has_data+0x1f/0x40
Call Trace:
vsock_bpf_recvmsg+0xca/0x5e0
sock_recvmsg+0xb9/0xc0
__sys_recvfrom+0xb3/0x130
__x64_sys_recvfrom+0x20/0x30
do_syscall_64+0x93/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
So we need to check the `vsk->transport` in vsock_bpf_recvmsg(),
especially for connected sockets (stream/seqpacket) as we already
do in __vsock_connectible_recvmsg().
Fixes: 634f1a7110 ("vsock: support sockmap")
Cc: stable@vger.kernel.org
Reported-by: Michal Luczaj <mhal@rbox.co>
Closes: https://lore.kernel.org/netdev/5ca20d4c-1017-49c2-9516-f6f75fd331e9@rbox.co/
Tested-by: Michal Luczaj <mhal@rbox.co>
Reported-by: syzbot+3affdbfc986ecd9200fd@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/677f84a8.050a0220.25a300.01b3.GAE@google.com/
Tested-by: syzbot+3affdbfc986ecd9200fd@syzkaller.appspotmail.com
Reviewed-by: Hyunwoo Kim <v4bel@theori.io>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6be7aca91009865d8c2b73589270224a6b6e67ab upstream.
In 4.19, before the switch to linkmode bitmaps, PHY_GBIT_FEATURES
included feature bits for aneg and TP/MII ports.
SUPPORTED_TP | \
SUPPORTED_MII)
SUPPORTED_10baseT_Full)
SUPPORTED_100baseT_Full)
SUPPORTED_1000baseT_Full)
PHY_100BT_FEATURES | \
PHY_DEFAULT_FEATURES)
PHY_1000BT_FEATURES)
Referenced commit expanded PHY_GBIT_FEATURES, silently removing
PHY_DEFAULT_FEATURES. The removed part can be re-added by using
the new PHY_GBIT_FEATURES definition.
Not clear to me is why nobody seems to have noticed this issue.
I stumbled across this when checking what it takes to make
phy_10_100_features_array et al private to phylib.
Fixes: d0939c26c5 ("net: ethernet: xgbe: expand PHY_GBIT_FEAUTRES")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/46521973-7738-4157-9f5e-0bb6f694acba@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 218cc166321fb3cc8786677ffe0d09a78778a910 upstream.
The disconnect test-case generates spurious errors:
INFO: disconnect
INFO: extra options: -I 3 -i /tmp/tmp.r43niviyoI
01 ns1 MPTCP -> ns1 (10.0.1.1:10000 ) MPTCP (duration 140ms) [FAIL]
file received by server does not match (in, out):
Unexpected revents: POLLERR/POLLNVAL(19)
-rw-r--r-- 1 root root 10028676 Jan 10 10:47 /tmp/tmp.r43niviyoI.disconnect
Trailing bytes are:
��\����R���!8��u2��5N%
-rw------- 1 root root 9992290 Jan 10 10:47 /tmp/tmp.Os4UbnWbI1
Trailing bytes are:
��\����R���!8��u2��5N%
02 ns1 MPTCP -> ns1 (dead:beef:1::1:10001) MPTCP (duration 206ms) [ OK ]
03 ns1 MPTCP -> ns1 (dead:beef:1::1:10002) TCP (duration 31ms) [ OK ]
04 ns1 TCP -> ns1 (dead:beef:1::1:10003) MPTCP (duration 26ms) [ OK ]
[FAIL] Tests of the full disconnection have failed
Time: 2 seconds
The root cause is actually in the user-space bits: the test program
currently disconnects as soon as all the pending data has been spooled,
generating an FASTCLOSE. If such option reaches the peer before the
latter has reached the closed status, the msk socket will report an
error to the user-space, as per protocol specification, causing the
above failure.
Address the issue explicitly waiting for all the relevant sockets to
reach a closed status before performing the disconnect.
Fixes: 05be5e273c ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250113-net-mptcp-connect-st-flakes-v1-3-0d986ee7b1b6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2ca06a2f65310aeef30bb69b7405437a14766e4d upstream.
mptcp_cleanup_rbuf() is responsible to send acks when the user-space
reads enough data to update the receive windows significantly.
It tries hard to avoid acquiring the subflow sockets locks by checking
conditions similar to the ones implemented at the TCP level.
To avoid too much code duplication - the MPTCP protocol can't reuse the
TCP helpers as part of the relevant status is maintained into the msk
socket - and multiple costly window size computation, mptcp_cleanup_rbuf
uses a rough estimate for the most recently advertised window size:
the MPTCP receive free space, as recorded as at last-ack time.
Unfortunately the above does not allow mptcp_cleanup_rbuf() to detect
a zero to non-zero win change in some corner cases, skipping the
tcp_cleanup_rbuf call and leaving the peer stuck.
After commit ea66758c17 ("tcp: allow MPTCP to update the announced
window"), MPTCP has actually cheap access to the announced window value.
Use it in mptcp_cleanup_rbuf() for a more accurate ack generation.
Fixes: e3859603ba ("mptcp: better msk receive window updates")
Cc: stable@vger.kernel.org
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/20250107131845.5e5de3c5@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250113-net-mptcp-connect-st-flakes-v1-1-0d986ee7b1b6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cefc479cbb50399dec0c8e996f3539c48a1ee9dd upstream.
i2c-atr catches the BUS_NOTIFY_DEL_DEVICE event on the bus and removes
the translation by calling i2c_atr_detach_client().
However, BUS_NOTIFY_DEL_DEVICE happens when the device is about to be
removed from this bus, i.e. before removal, and thus before calling
.remove() on the driver. If the driver happens to do any i2c
transactions in its remove(), they will fail.
Fix this by catching BUS_NOTIFY_REMOVED_DEVICE instead, thus removing
the translation only after the device is actually removed.
Fixes: a076a860ac ("media: i2c: add I2C Address Translator (ATR) support")
Cc: stable@vger.kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Tested-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b579d6fdc3a9149bb4d2b3133cc0767130ed13e6 ]
Ensure we propagate npwg to the target as well instead
of assuming its the same logical blocks per physical block.
This ensures devices with large IUs information properly
propagated on the target.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cacd9ae4bf801ff4125d8961bb9a3ba955e51680 ]
As the comment above waitqueue_active() explains, it can only be used
if both waker and waiter have mb()'s that pair with each other. However
__pollwait() is broken in this respect.
This is not pipe-specific, but let's look at pipe_poll() for example:
poll_wait(...); // -> __pollwait() -> add_wait_queue()
LOAD(pipe->head);
LOAD(pipe->head);
In theory these LOAD()'s can leak into the critical section inside
add_wait_queue() and can happen before list_add(entry, wq_head), in this
case pipe_poll() can race with wakeup_pipe_readers/writers which do
smp_mb();
if (waitqueue_active(wq_head))
wake_up_interruptible(wq_head);
There are more __pollwait()-like functions (grep init_poll_funcptr), and
it seems that at least ep_ptable_queue_proc() has the same problem, so the
patch adds smp_mb() into poll_wait().
Link: https://lore.kernel.org/all/20250102163320.GA17691@redhat.com/
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250107162717.GA18922@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd4a7b2e6a2437a5502910c08128ea3bad55a80b ]
acpi_dev_irq_override() gets called approx. 30 times during boot (15 legacy
IRQs * 2 override_table entries). Of these 30 calls at max 1 will match
the non DMI checks done by acpi_dev_irq_override(). The dmi_check_system()
check is by far the most expensive check done by acpi_dev_irq_override(),
make this call the last check done by acpi_dev_irq_override() so that it
will be called at max 1 time instead of 30 times.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20241228165253.42584-1-hdegoede@redhat.com
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5a8b6446c0d370716f193771ccacf3260a57534 ]
Instead of storing an opaque string, call security_secctx_to_secid()
right in the "secctx" command handler and store only the numeric
"secid". This eliminates an unnecessary string allocation and allows
the daemon to receive errors when writing the "secctx" command instead
of postponing the error to the "bind" command handler. For example,
if the kernel was built without `CONFIG_SECURITY`, "bind" will return
`EOPNOTSUPP`, but the daemon doesn't know why. With this patch, the
"secctx" will instead return `EOPNOTSUPP` which is the right context
for this error.
This patch adds a boolean flag `have_secid` because I'm not sure if we
can safely assume that zero is the special secid value for "not set".
This appears to be true for SELinux, Smack and AppArmor, but since
this attribute is not documented, I'm unable to derive a stable
guarantee for that.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241209141554.638708-1-max.kellermann@ionos.com/
Link: https://lore.kernel.org/r/20241213135013.2964079-6-dhowells@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 973b710b8821c3401ad7a25360c89e94b26884ac ]
Tell tar to ignore silly-rename files (".__afs*" and ".nfs*") when building
the header archive. These occur when a file that is open is unlinked
locally, but hasn't yet been closed. Such files are visible to the user
via the getdents() syscall and so programs may want to do things with them.
During the kernel build, such files may be made during the processing of
header files and the cleanup may get deferred by fput() which may result in
tar seeing these files when it reads the directory, but they may have
disappeared by the time it tries to open them, causing tar to fail with an
error. Further, we don't want to include them in the tarball if they still
exist.
With CONFIG_HEADERS_INSTALL=y, something like the following may be seen:
find: './kernel/.tmp_cpio_dir/include/dt-bindings/reset/.__afs2080': No such file or directory
tar: ./include/linux/greybus/.__afs3C95: File removed before we read it
The find warning doesn't seem to cause a problem.
Fix this by telling tar when called from in gen_kheaders.sh to exclude such
files. This only affects afs and nfs; cifs uses the Windows Hidden
attribute to prevent the file from being seen.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241213135013.2964079-2-dhowells@redhat.com
cc: Masahiro Yamada <masahiroy@kernel.org>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-kernel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 093f70c134f70e4632b295240f07d2b50b74e247 ]
When this controller is a target, the NACK handling had two issues.
First, the return value from the backend was not checked on the initial
WRITE_REQUESTED. So, the driver missed to send a NACK in this case.
Also, the NACK always arrives one byte late on the bus, even in the
WRITE_RECEIVED case. This seems to be a HW issue. We should then not
rely on the backend to correctly NACK the superfluous byte as well. Fix
both issues by introducing a flag which gets set whenever the backend
requests a NACK and keep sending it until we get a STOP condition.
Fixes: de20d1857d ("i2c: rcar: add slave support")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca89f73394daf92779ddaa37b42956f4953f3941 ]
When misconfigured, the initial setup of the current mux channel can
fail, too. It must be checked as well.
Fixes: 50a5ba8769 ("i2c: mux: demux-pinctrl: add driver")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d15638bf76ad47874ecb5dc386f0945fc0b2a875 ]
This reverts commit 98d1fb94ce75f39febd456d6d3cbbe58b6678795.
The commit uses data nbits instead of addr nbits for dummy phase. This
causes a regression for all boards where spi-tx-bus-width is smaller
than spi-rx-bus-width. It is a common pattern for boards to have
spi-tx-bus-width == 1 and spi-rx-bus-width > 1. The regression causes
all reads with a dummy phase to become unavailable for such boards,
leading to a usually slower 0-dummy-cycle read being selected.
Most controllers' supports_op hooks call spi_mem_default_supports_op().
In spi_mem_default_supports_op(), spi_mem_check_buswidth() is called to
check if the buswidths for the op can actually be supported by the
board's wiring. This wiring information comes from (among other things)
the spi-{tx,rx}-bus-width DT properties. Based on these properties,
SPI_TX_* or SPI_RX_* flags are set by of_spi_parse_dt().
spi_mem_check_buswidth() then uses these flags to make the decision
whether an op can be supported by the board's wiring (in a way,
indirectly checking against spi-{rx,tx}-bus-width).
Now the tricky bit here is that spi_mem_check_buswidth() does:
if (op->dummy.nbytes &&
spi_check_buswidth_req(mem, op->dummy.buswidth, true))
return false;
The true argument to spi_check_buswidth_req() means the op is treated as
a TX op. For a board that has say 1-bit TX and 4-bit RX, a 4-bit dummy
TX is considered as unsupported, and the op gets rejected.
The commit being reverted uses the data buswidth for dummy buswidth. So
for reads, the RX buswidth gets used for the dummy phase, uncovering
this issue. In reality, a dummy phase is neither RX nor TX. As the name
suggests, these are just dummy cycles that send or receive no data, and
thus don't really need to have any buswidth at all.
Ideally, dummy phases should not be checked against the board's wiring
capabilities at all, and should only be sanity-checked for having a sane
buswidth value. Since we are now at rc7 and such a change might
introduce many unexpected bugs, revert the commit for now. It can be
sent out later along with the spi_mem_check_buswidth() fix.
Fixes: 98d1fb94ce75 ("mtd: spi-nor: core: replace dummy buswidth from addr to data")
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Closes: https://lore.kernel.org/linux-mtd/3342163.44csPzL39Z@steina-w/
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2c68cea431d65292b592c9f8446c918d45fcf78 ]
Fix several issues with division of negative numbers in the tmp513
driver.
The docs on the DIV_ROUND_CLOSEST macro explain that dividing a negative
value by an unsigned type is undefined behavior. The driver was doing
this in several places, i.e. data->shunt_uohms has type of u32. The
actual "undefined" behavior is that it converts both values to unsigned
before doing the division, for example:
int ret = DIV_ROUND_CLOSEST(-100, 3U);
results in ret == 1431655732 instead of -33.
Furthermore the MILLI macro has a type of unsigned long. Multiplying a
signed long by an unsigned long results in an unsigned long.
So, we need to cast both MILLI and data data->shunt_uohms to long when
using the DIV_ROUND_CLOSEST macro.
Fixes: f07f9d2467f4 ("hwmon: (tmp513) Use SI constants from units.h")
Fixes: 59dfa75e5d ("hwmon: Add driver for Texas Instruments TMP512/513 sensor chips.")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20250114-fix-si-prefix-macro-sign-bugs-v1-1-696fd8d10f00@baylibre.com
[groeck: Drop some continuation lines]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 202580b60229345dc2637099f10c8a8857c1fdc2 ]
PRUSS APIs in pruss_driver.h produce lots of compilation errors when
CONFIG_TI_PRUSS is not set.
The errors and warnings,
warning: returning 'void *' from a function with return type 'int' makes
integer from pointer without a cast [-Wint-conversion]
error: expected identifier or '(' before '{' token
Fix these warnings and errors by fixing the return type of pruss APIs as
well as removing the misplaced semicolon from pruss_cfg_xfr_enable()
Fixes: 0211cc1e4f ("soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20241220100508.1554309-2-danishanwar@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4b5ccd392b92300a2b341705cc4805681094e49 ]
After a job completes, the corresponding pointer in the device must
be set to NULL. Failing to do so triggers a warning when unloading
the driver, as it appears the job is still active. To prevent this,
assign the job pointer to NULL after completing the job, indicating
the job has finished.
Fixes: 14d1d19086 ("drm/v3d: Remove the bad signaled() implementation.")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113154741.67520-1-mcanal@igalia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f95b0247764acd739d949ff247db4b76138e55a ]
According to RFC4303, section "3.3.3. Sequence Number Generation",
the first packet sent using a given SA will contain a sequence
number of 1.
This is applicable to both ESN and non-ESN mode, which was not covered
in commit mentioned in Fixes line.
Fixes: 3d42c8cc67a8 ("net/mlx5e: Ensure that IPsec sequence packet number starts from 1")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25f23524dfa227959beb3b2c2c0f38e0222f4cfa ]
All packet offloads SAs have reqid in it to make sure they have
corresponding policy. While it is not strictly needed for transparent
mode, it is extremely important in tunnel mode. In that mode, policy and
SAs have different match criteria.
Policy catches the whole subnet addresses, and SA catches the tunnel gateways
addresses. The source address of such tunnel is not known during egress packet
traversal in flow steering as it is added only after successful encryption.
As reqid is required for packet offload and it is unique for every SA,
we can safely rely on it only.
The output below shows the configured egress policy and SA by strongswan:
[leonro@vm ~]$ sudo ip x s
src 192.169.101.2 dst 192.169.101.1
proto esp spi 0xc88b7652 reqid 1 mode tunnel
replay-window 0 flag af-unspec esn
aead rfc4106(gcm(aes)) 0xe406a01083986e14d116488549094710e9c57bc6 128
anti-replay esn context:
seq-hi 0x0, seq 0x0, oseq-hi 0x0, oseq 0x0
replay_window 1, bitmap-length 1
00000000
crypto offload parameters: dev eth2 dir out mode packet
[leonro@064 ~]$ sudo ip x p
src 192.170.0.0/16 dst 192.170.0.0/16
dir out priority 383615 ptype main
tmpl src 192.169.101.2 dst 192.169.101.1
proto esp spi 0xc88b7652 reqid 1 mode tunnel
crypto offload parameters: dev eth2 mode packet
Fixes: b3beba1fb4 ("net/mlx5e: Allow policies with reqid 0, to support IKE policy holes")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c08d3e62b2e73e14da318a1d20b52d0486a28ee0 ]
User added steering rules at RDMA_TX were being added to the first prio,
which is the counters prio.
Fix that so that they are correctly added to the BYPASS_PRIO instead.
Fixes: 24670b1a31 ("net/mlx5: Add support for RDMA TX steering")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 001ba0902046cb6c352494df610718c0763e77a5 ]
The fec_enet_update_cbd function calls page_pool_dev_alloc_pages but did
not handle the case when it returned NULL. There was a WARN_ON(!new_page)
but it would still proceed to use the NULL pointer and then crash.
This case does seem somewhat rare but when the system is under memory
pressure it can happen. One case where I can duplicate this with some
frequency is when writing over a smbd share to a SATA HDD attached to an
imx6q.
Setting /proc/sys/vm/min_free_kbytes to higher values also seems to solve
the problem for my test case. But it still seems wrong that the fec driver
ignores the memory allocation error and can crash.
This commit handles the allocation error by dropping the current packet.
Fixes: 95698ff617 ("net: fec: using page pool to manage RX buffers")
Signed-off-by: Kevin Groeneveld <kgroeneveld@lenbrook.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250113154846.1765414-1-kgroeneveld@lenbrook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c17ff476f53afb30f90bb3c2af77de069c81a622 ]
If coalesce_count is greater than 255 it will not fit in the register and
will overflow. This can be reproduced by running
# ethtool -C ethX rx-frames 256
which will result in a timeout of 0us instead. Fix this by checking for
invalid values and reporting an error.
Fixes: 8a3b7a252d ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://patch.msgid.link/20250113163001.2335235-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
