commit 4b1ff850e0c1aacc23e923ed22989b827b9808f9 upstream.
When servers set the C-flag in their MP_CAPABLE to tell clients not to
create subflows to the initial address and port, clients will likely not
use their other endpoints. That's because the in-kernel path-manager
uses the 'subflow' endpoints to create subflows only to the initial
address and port.
If the limits have not been modified to accept ADD_ADDR, the client
doesn't try to establish new subflows. If the limits accept ADD_ADDR,
the routing routes will be used to select the source IP.
The C-flag is typically set when the server is operating behind a legacy
Layer 4 load balancer, or using anycast IP address. Clients having their
different 'subflow' endpoints setup, don't end up creating multiple
subflows as expected, and causing some deployment issues.
A special case is then added here: when servers set the C-flag in the
MPC and directly sends an ADD_ADDR, this single ADD_ADDR is accepted.
The 'subflows' endpoints will then be used with this new remote IP and
port. This exception is only allowed when the ADD_ADDR is sent
immediately after the 3WHS, and makes the client switching to the 'fully
established' mode. After that, 'select_local_address()' will not be able
to find any subflows, because 'id_avail_bitmap' will be filled in
mptcp_pm_create_subflow_or_signal_addr(), when switching to 'fully
established' mode.
Fixes: df377be387 ("mptcp: add deny_join_id0 in mptcp_options_received")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/536
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-1-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflict in pm.c, because commit 498d7d8b75f1 ("mptcp: pm: remove
'_nl' from mptcp_pm_nl_is_init_remote_addr") renamed an helper in the
context, and it is not in this version. The same new code can be
applied at the same place.
Conflict in pm_kernel.c, because the modified code has been moved from
pm_netlink.c to pm_kernel.c in commit 8617e85e04bd ("mptcp: pm: split
in-kernel PM specific code"), which is not in this version. The
resolution is easy: simply by applying the patch where 'pm_kernel.c'
has been replaced 'pm_netlink.c'.
Conflict in pm_netlink.c, because commit b83fbca1b4c9 ("mptcp: pm:
reduce entries iterations on connect") is not in this version. Instead
of using the 'locals' variable (struct mptcp_pm_local *) from the new
version and embedding a "struct mptcp_addr_info", we can simply
continue to use the 'addrs' variable (struct mptcp_addr_info *).
Conflict in protocol.h, because commit af3dc0ad3167 ("mptcp: Remove
unused declaration mptcp_sockopt_sync()") is not in this version and
it removed one line in the context. The resolution is easy because the
new function can still be added at the same place. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bc3905a71f02511607d3ccf732360580209cac4c upstream.
The tailcall_bpf2bpf_hierarchy_fentry test hangs on s390. Its call
graph is as follows:
entry()
subprog_tail()
trampoline()
fentry()
the rest of subprog_tail() # via BPF_TRAMP_F_CALL_ORIG
return to entry()
The problem is that the rest of subprog_tail() increments the tail call
counter, but the trampoline discards the incremented value. This
results in an astronomically large number of tail calls.
Fix by making the trampoline write the incremented tail call counter
back.
Fixes: 528eb2cb87 ("s390/bpf: Implement arch_prepare_bpf_trampoline()")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20250813121016.163375-4-iii@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c861a6b147137d10b5ff88a2c492ba376cd1b8b0 upstream.
The tailcall_bpf2bpf_hierarchy_1 test hangs on s390. Its call graph is
as follows:
entry()
subprog_tail()
bpf_tail_call_static(0) -> entry + tail_call_start
subprog_tail()
bpf_tail_call_static(0) -> entry + tail_call_start
entry() copies its tail call counter to the subprog_tail()'s frame,
which then increments it. However, the incremented result is discarded,
leading to an astronomically large number of tail calls.
Fix by writing the incremented counter back to the entry()'s frame.
Fixes: dd691e847d ("s390/bpf: Implement bpf_jit_supports_subprog_tailcalls()")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20250813121016.163375-3-iii@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e26d523edf2a62b142d2dd2dd9b87f61ed92f33a upstream.
Currently the caller-allocated portion of the stack frame is described
using constants, hardcoded values, and an ASCII drawing, making it
harder than necessary to ensure that everything is in sync.
Declare a struct and use offsetof() and offsetofend() macros to refer
to various values stored within the frame.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250624121501.50536-3-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b2268d550d20ff860bddfe3a91b1aec00414689a upstream.
The calculation of the distance from %r15 to the caller-allocated
portion of the stack frame is copy-pasted into multiple places in the
JIT code.
Move it to bpf_jit_prog() and save the result into bpf_jit::frame_off,
so that the other parts of the JIT can use it.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250624121501.50536-2-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit baf60d5cb8bc6b85511c5df5f0ad7620bb66d23c ]
In certain circumstances, the ACPI handle of a data-only node may be
NULL, in which case it does not make sense to attempt to attach that
node to an ACPI namespace object, so update the code to avoid attempts
to do so.
This prevents confusing and unuseful error messages from being printed.
Also document the fact that the ACPI handle of a data-only node may be
NULL and when that happens in a code comment. In addition, make
acpi_add_nondev_subnodes() print a diagnostic message for each data-only
node with an unknown ACPI namespace scope.
Fixes: 1d52f10917 ("ACPI: property: Tie data nodes to acpi handles")
Cc: 6.0+ <stable@vger.kernel.org> # 6.0+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 737c3a09dcf69ba2814f3674947ccaec1861c985 ]
In some places in the ACPI device properties handling code, it is
unclear why the code is what it is. Some assumptions are not documented
and some pieces of code are based on knowledge that is not mentioned
anywhere.
Add code comments explaining these things.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Stable-dep-of: baf60d5cb8bc ("ACPI: property: Do not pass NULL handles to acpi_attach_data()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d06118fe9b03426484980ed4c189a8c7b99fa631 ]
Data-only subnode links following the ACPI data subnode GUID in a _DSD
package are expected to point to named objects returning _DSD-equivalent
packages. If a reference to such an object is used in the target field
of any of those links, that object will be evaluated in place (as a
named object) and its return data will be embedded in the outer _DSD
package.
For this reason, it is not expected to see a subnode link with the
target field containing a local reference (that would mean pointing
to a device or another object that cannot be evaluated in place and
therefore cannot return a _DSD-equivalent package).
Accordingly, simplify the code parsing data-only subnode links to
simply print a message when it encounters a local reference in the
target field of one of those links.
Moreover, since acpi_nondev_subnode_data_ok() would only have one
caller after the change above, fold it into that caller.
Link: https://lore.kernel.org/linux-acpi/CAJZ5v0jVeSrDO6hrZhKgRZrH=FpGD4vNUjFD8hV9WwN9TLHjzQ@mail.gmail.com/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Stable-dep-of: baf60d5cb8bc ("ACPI: property: Do not pass NULL handles to acpi_attach_data()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 399dbcadc01ebf0035f325eaa8c264f8b5cd0a14 ]
There is no synchronization between different code paths in the ACPI
battery driver that update its sysfs interface or its power supply
class device interface. In some cases this results to functional
failures due to race conditions.
One example of this is when two ACPI notifications:
- ACPI_BATTERY_NOTIFY_STATUS (0x80)
- ACPI_BATTERY_NOTIFY_INFO (0x81)
are triggered (by the platform firmware) in a row with a little delay
in between after removing and reinserting a laptop battery. Both
notifications cause acpi_battery_update() to be called and if the delay
between them is sufficiently small, sysfs_add_battery() can be re-entered
before battery->bat is set which leads to a duplicate sysfs entry error:
sysfs: cannot create duplicate filename '/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0A:00/power_supply/BAT1'
CPU: 1 UID: 0 PID: 185 Comm: kworker/1:4 Kdump: loaded Not tainted 6.12.38+deb13-amd64 #1 Debian 6.12.38-1
Hardware name: Gateway NV44 /SJV40-MV , BIOS V1.3121 04/08/2009
Workqueue: kacpi_notify acpi_os_execute_deferred
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
sysfs_warn_dup.cold+0x17/0x23
sysfs_create_dir_ns+0xce/0xe0
kobject_add_internal+0xba/0x250
kobject_add+0x96/0xc0
? get_device_parent+0xde/0x1e0
device_add+0xe2/0x870
__power_supply_register.part.0+0x20f/0x3f0
? wake_up_q+0x4e/0x90
sysfs_add_battery+0xa4/0x1d0 [battery]
acpi_battery_update+0x19e/0x290 [battery]
acpi_battery_notify+0x50/0x120 [battery]
acpi_ev_notify_dispatch+0x49/0x70
acpi_os_execute_deferred+0x1a/0x30
process_one_work+0x177/0x330
worker_thread+0x251/0x390
? __pfx_worker_thread+0x10/0x10
kthread+0xd2/0x100
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
kobject: kobject_add_internal failed for BAT1 with -EEXIST, don't try to register things with the same name in the same directory.
There are also other scenarios in which analogous issues may occur.
Address this by using a common lock in all of the code paths leading
to updates of driver interfaces: ACPI Notify () handler, system resume
callback and post-resume notification, device addition and removal.
This new lock replaces sysfs_lock that has been used only in
sysfs_remove_battery() which now is going to be always called under
the new lock, so it doesn't need any internal locking any more.
Fixes: 1066625155 ("ACPI: battery: Install Notify() handler directly")
Closes: https://lore.kernel.org/linux-acpi/20250910142653.313360-1-luogf2025@163.com/
Reported-by: GuangFei Luo <luogf2025@163.com>
Tested-by: GuangFei Luo <luogf2025@163.com>
Cc: 6.6+ <stable@vger.kernel.org> # 6.6+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 815daedc318b2f9f1b956d0631377619a0d69d96 ]
Even if it's not critical, the avoidance of checking the error code
from devm_mutex_init() call today diminishes the point of using devm
variant of it. Tomorrow it may even leak something. Add the missed
check.
Fixes: 0710c1ce5045 ("ACPI: battery: initialize mutexes through devm_ APIs")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20241030162754.2110946-1-andriy.shevchenko@linux.intel.com
[ rjw: Added 2 empty code lines ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 399dbcadc01e ("ACPI: battery: Add synchronization between interface updates")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f620d66af3165838bfa845dcf9f5f9b4089bf508 ]
Commit 68d54ceeec ("arm64: mte: Allow PTRACE_PEEKMTETAGS access to the
zero page") attempted to fix ptrace() reading of tags from the zero page
by marking it as PG_mte_tagged during cpu_enable_mte(). The same commit
also changed the ptrace() tag access permission check to the VM_MTE vma
flag while turning the page flag test into a WARN_ON_ONCE().
Attempting to set the PG_mte_tagged flag early with
CONFIG_DEFERRED_STRUCT_PAGE_INIT enabled may either hang (after commit
d77e59a8fc "arm64: mte: Lock a page for MTE tag initialisation") or
have the flags cleared later during page_alloc_init_late(). In addition,
pages_identical() -> memcmp_pages() will reject any comparison with the
zero page as it is marked as tagged.
Partially revert the above commit to avoid setting PG_mte_tagged on the
zero page. Update the __access_remote_tags() warning on untagged pages
to ignore the zero page since it is known to have the tags initialised.
Note that all user mapping of the zero page are marked as pte_special().
The arm64 set_pte_at() will not call mte_sync_tags() on such pages, so
PG_mte_tagged will remain cleared.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 68d54ceeec ("arm64: mte: Allow PTRACE_PEEKMTETAGS access to the zero page")
Reported-by: Gergely Kovacs <Gergely.Kovacs2@arm.com>
Cc: stable@vger.kernel.org # 5.10.x
Cc: Will Deacon <will@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lance Yang <lance.yang@linux.dev>
Acked-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Lance Yang <lance.yang@linux.dev>
Signed-off-by: Will Deacon <will@kernel.org>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 195a1b7d8388c0ec2969a39324feb8bebf9bb907 ]
The kprobe page is allocated by execmem allocator with ROX permission.
It needs to call set_memory_rox() to set proper permission for the
direct map too. It was missed.
Fixes: 10d5e97c1b ("arm64: use PAGE_KERNEL_ROX directly in alloc_insn_page")
Cc: <stable@vger.kernel.org>
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
[ kept existing __vmalloc_node_range() instead of upstream's execmem_alloc() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2c69490dda5d4c9f1bfbb2898989c8f3530e354 upstream
Prior to commit b52da4054ee0 ("ipmi: Rework user message limit handling"),
i_ipmi_request() used to increase the user reference counter if the receive
message is provided by the caller of IPMI API functions. This is no longer
the case. However, ipmi_free_recv_msg() is still called and decreases the
reference counter. This results in the reference counter reaching zero,
the user data pointer is released, and all kinds of interesting crashes are
seen.
Fix the problem by increasing user reference counter if the receive message
has been provided by the caller.
Fixes: b52da4054ee0 ("ipmi: Rework user message limit handling")
Reported-by: Eric Dumazet <edumazet@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-ID: <20251006201857.3433837-1-linux@roeck-us.net>
Signed-off-by: Corey Minyard <corey@minyard.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b52da4054ee0bf9ecb44996f2c83236ff50b3812 upstream
This patch required quite a bit of work to backport due to a number
of unrelated changes that do not make sense to backport. This has
been run against my test suite and passes all tests.
The limit on the number of user messages had a number of issues,
improper counting in some cases and a use after free.
Restructure how this is all done to handle more in the receive message
allocation routine, so all refcouting and user message limit counts
are done in that routine. It's a lot cleaner and safer.
Reported-by: Gilles BULOZ <gilles.buloz@kontron.com>
Closes: https://lore.kernel.org/lkml/aLsw6G0GyqfpKs2S@mail.minyard.net/
Fixes: 8e76741c3d ("ipmi: Add a limit on the number of users that may use IPMI")
Cc: <stable@vger.kernel.org> # 4.19
Signed-off-by: Corey Minyard <corey@minyard.net>
Tested-by: Gilles BULOZ <gilles.buloz@kontron.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6eb350a2233100a283f882c023e5ad426d0ed63b ]
rseq_need_restart() reads and clears task::rseq_event_mask with preemption
disabled to guard against the scheduler.
But membarrier() uses an IPI and sets the PREEMPT bit in the event mask
from the IPI, which leaves that RMW operation unprotected.
Use guard(irq) if CONFIG_MEMBARRIER is enabled to fix that.
Fixes: 2a36ab717e ("rseq/membarrier: Add MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: stable@vger.kernel.org
[ Applied changes to include/linux/sched.h instead of include/linux/rseq.h ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7b26da407420e5054e3f06c5d13271697add9423 ]
[BUG]
With my local branch to enable bs > ps support for btrfs, sometimes I
hit the following ASSERT() inside submit_one_sector():
ASSERT(block_start != EXTENT_MAP_HOLE);
Please note that it's not yet possible to hit this ASSERT() in the wild
yet, as it requires btrfs bs > ps support, which is not even in the
development branch.
But on the other hand, there is also a very low chance to hit above
ASSERT() with bs < ps cases, so this is an existing bug affect not only
the incoming bs > ps support but also the existing bs < ps support.
[CAUSE]
Firstly that ASSERT() means we're trying to submit a dirty block but
without a real extent map nor ordered extent map backing it.
Furthermore with extra debugging, the folio triggering such ASSERT() is
always larger than the fs block size in my bs > ps case.
(8K block size, 4K page size)
After some more debugging, the ASSERT() is trigger by the following
sequence:
extent_writepage()
| We got a 32K folio (4 fs blocks) at file offset 0, and the fs block
| size is 8K, page size is 4K.
| And there is another 8K folio at file offset 32K, which is also
| dirty.
| So the filemap layout looks like the following:
|
| "||" is the filio boundary in the filemap.
| "//| is the dirty range.
|
| 0 8K 16K 24K 32K 40K
| |////////| |//////////////////////||////////|
|
|- writepage_delalloc()
| |- find_lock_delalloc_range() for [0, 8K)
| | Now range [0, 8K) is properly locked.
| |
| |- find_lock_delalloc_range() for [16K, 40K)
| | |- btrfs_find_delalloc_range() returned range [16K, 40K)
| | |- lock_delalloc_folios() locked folio 0 successfully
| | |
| | | The filemap range [32K, 40K) got dropped from filemap.
| | |
| | |- lock_delalloc_folios() failed with -EAGAIN on folio 32K
| | | As the folio at 32K is dropped.
| | |
| | |- loops = 1;
| | |- max_bytes = PAGE_SIZE;
| | |- goto again;
| | | This will re-do the lookup for dirty delalloc ranges.
| | |
| | |- btrfs_find_delalloc_range() called with @max_bytes == 4K
| | | This is smaller than block size, so
| | | btrfs_find_delalloc_range() is unable to return any range.
| | \- return false;
| |
| \- Now only range [0, 8K) has an OE for it, but for dirty range
| [16K, 32K) it's dirty without an OE.
| This breaks the assumption that writepage_delalloc() will find
| and lock all dirty ranges inside the folio.
|
|- extent_writepage_io()
|- submit_one_sector() for [0, 8K)
| Succeeded
|
|- submit_one_sector() for [16K, 24K)
Triggering the ASSERT(), as there is no OE, and the original
extent map is a hole.
Please note that, this also exposed the same problem for bs < ps
support. E.g. with 64K page size and 4K block size.
If we failed to lock a folio, and falls back into the "loops = 1;"
branch, we will re-do the search using 64K as max_bytes.
Which may fail again to lock the next folio, and exit early without
handling all dirty blocks inside the folio.
[FIX]
Instead of using the fixed size PAGE_SIZE as @max_bytes, use
@sectorsize, so that we are ensured to find and lock any remaining
blocks inside the folio.
And since we're here, add an extra ASSERT() to
before calling btrfs_find_delalloc_range() to make sure the @max_bytes is
at least no smaller than a block to avoid false negative.
Cc: stable@vger.kernel.org # 5.15+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[ adapted folio terminology and API calls to page-based equivalents ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 85afa9ea122dd9d4a2ead104a951d318975dcd25 ]
The fields dma_chan_tx and dma_chan_rx of the struct pci_epf_test can be
NULL even after EPF initialization. Then it is prudent to check that
they have non-NULL values before releasing the channels. Add the checks
in pci_epf_test_clean_dma_chan().
Without the checks, NULL pointer dereferences happen and they can lead
to a kernel panic in some cases:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050
Call trace:
dma_release_channel+0x2c/0x120 (P)
pci_epf_test_epc_deinit+0x94/0xc0 [pci_epf_test]
pci_epc_deinit_notify+0x74/0xc0
tegra_pcie_ep_pex_rst_irq+0x250/0x5d8
irq_thread_fn+0x34/0xb8
irq_thread+0x18c/0x2e8
kthread+0x14c/0x210
ret_from_fork+0x10/0x20
Fixes: 8353813c88 ("PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities")
Fixes: 5ebf3fc59b ("PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
[mani: trimmed the stack trace]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250916025756.34807-1-shinichiro.kawasaki@wdc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9b80bdb10aee04ce7289896e6bdad13e33972636 ]
Remove a surplus return statement from the void function that has been
added in the commit commit 8353813c88 ("PCI: endpoint: Enable DMA
tests for endpoints with DMA capabilities").
Especially, as an empty return statements at the end of a void functions
serve little purpose.
This fixes the following checkpatch.pl script warning:
WARNING: void function return statements are not generally useful
#296: FILE: drivers/pci/endpoint/functions/pci-epf-test.c:296:
+ return;
+}
Link: https://lore.kernel.org/r/tencent_F250BEE2A65745A524E2EFE70CF615CA8F06@qq.com
Signed-off-by: Wang Jiang <jiangwang@kylinos.cn>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Stable-dep-of: 85afa9ea122d ("PCI: endpoint: pci-epf-test: Add NULL check for DMA channels before release")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d8b6dc9256762293048bf122fc11c4e612d0ef5d ]
This parameter set the maximum number of connections per ip address.
The default is 8.
Cc: stable@vger.kernel.org
Fixes: c0d41112f1a5 ("ksmbd: extend the connection limiting mechanism to support IPv6")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
[ Adjust reserved room ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0910dd7c9ad45a2605c45fd2bf3d1bcac087687c ]
Skip the WRMSR and HLT fastpaths in SVM's VM-Exit handler if the next RIP
isn't valid, e.g. because KVM is running with nrips=false. SVM must
decode and emulate to skip the instruction if the CPU doesn't provide the
next RIP, and getting the instruction bytes to decode requires reading
guest memory. Reading guest memory through the emulator can fault, i.e.
can sleep, which is disallowed since the fastpath handlers run with IRQs
disabled.
BUG: sleeping function called from invalid context at ./include/linux/uaccess.h:106
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 32611, name: qemu
preempt_count: 1, expected: 0
INFO: lockdep is turned off.
irq event stamp: 30580
hardirqs last enabled at (30579): [<ffffffffc08b2527>] vcpu_run+0x1787/0x1db0 [kvm]
hardirqs last disabled at (30580): [<ffffffffb4f62e32>] __schedule+0x1e2/0xed0
softirqs last enabled at (30570): [<ffffffffb4247a64>] fpu_swap_kvm_fpstate+0x44/0x210
softirqs last disabled at (30568): [<ffffffffb4247a64>] fpu_swap_kvm_fpstate+0x44/0x210
CPU: 298 UID: 0 PID: 32611 Comm: qemu Tainted: G U 6.16.0-smp--e6c618b51cfe-sleep #782 NONE
Tainted: [U]=USER
Hardware name: Google Astoria-Turin/astoria, BIOS 0.20241223.2-0 01/17/2025
Call Trace:
<TASK>
dump_stack_lvl+0x7d/0xb0
__might_resched+0x271/0x290
__might_fault+0x28/0x80
kvm_vcpu_read_guest_page+0x8d/0xc0 [kvm]
kvm_fetch_guest_virt+0x92/0xc0 [kvm]
__do_insn_fetch_bytes+0xf3/0x1e0 [kvm]
x86_decode_insn+0xd1/0x1010 [kvm]
x86_emulate_instruction+0x105/0x810 [kvm]
__svm_skip_emulated_instruction+0xc4/0x140 [kvm_amd]
handle_fastpath_invd+0xc4/0x1a0 [kvm]
vcpu_run+0x11a1/0x1db0 [kvm]
kvm_arch_vcpu_ioctl_run+0x5cc/0x730 [kvm]
kvm_vcpu_ioctl+0x578/0x6a0 [kvm]
__se_sys_ioctl+0x6d/0xb0
do_syscall_64+0x8a/0x2c0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f479d57a94b
</TASK>
Note, this is essentially a reapply of commit 5c30e8101e ("KVM: SVM:
Skip WRMSR fastpath on VM-Exit if next RIP isn't valid"), but with
different justification (KVM now grabs SRCU when skipping the instruction
for other reasons).
Fixes: b439eb8ab5 ("Revert "KVM: SVM: Skip WRMSR fastpath on VM-Exit if next RIP isn't valid"")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250805190526.1453366-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
[ adapted switch-based MSR/HLT fastpath to if-based MSR-only check ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4d6fc29f36341d7795db1d1819b4c15fe9be7b23 ]
Patch series "mm/ksm: Fix incorrect accounting of KSM counters during
fork", v3.
The first patch in this series fixes the incorrect accounting of KSM
counters such as ksm_merging_pages, ksm_rmap_items, and the global
ksm_zero_pages during fork.
The following patch add a selftest to verify the ksm_merging_pages counter
was updated correctly during fork.
Test Results
============
Without the first patch
-----------------------
# [RUN] test_fork_ksm_merging_page_count
not ok 10 ksm_merging_page in child: 32
With the first patch
--------------------
# [RUN] test_fork_ksm_merging_page_count
ok 10 ksm_merging_pages is not inherited after fork
This patch (of 2):
Currently, the KSM-related counters in `mm_struct`, such as
`ksm_merging_pages`, `ksm_rmap_items`, and `ksm_zero_pages`, are inherited
by the child process during fork. This results in inconsistent
accounting.
When a process uses KSM, identical pages are merged and an rmap item is
created for each merged page. The `ksm_merging_pages` and
`ksm_rmap_items` counters are updated accordingly. However, after a fork,
these counters are copied to the child while the corresponding rmap items
are not. As a result, when the child later triggers an unmerge, there are
no rmap items present in the child, so the counters remain stale, leading
to incorrect accounting.
A similar issue exists with `ksm_zero_pages`, which maintains both a
global counter and a per-process counter. During fork, the per-process
counter is inherited by the child, but the global counter is not
incremented. Since the child also references zero pages, the global
counter should be updated as well. Otherwise, during zero-page unmerge,
both the global and per-process counters are decremented, causing the
global counter to become inconsistent.
To fix this, ksm_merging_pages and ksm_rmap_items are reset to 0 during
fork, and the global ksm_zero_pages counter is updated with the
per-process ksm_zero_pages value inherited by the child. This ensures
that KSM statistics remain accurate and reflect the activity of each
process correctly.
Link: https://lkml.kernel.org/r/cover.1758648700.git.donettom@linux.ibm.com
Link: https://lkml.kernel.org/r/7b9870eb67ccc0d79593940d9dbd4a0b39b5d396.1758648700.git.donettom@linux.ibm.com
Fixes: 7609385337 ("ksm: count ksm merging pages for each process")
Fixes: cb4df4cae4 ("ksm: count allocated ksm rmap_items for each process")
Fixes: e2942062e0 ("ksm: count all zero pages placed by KSM")
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Aboorva Devarajan <aboorvad@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ changed mm_flags_test() to test_bit() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 64e0d839c589f4f2ecd2e3e5bdb5cee6ba6bade9 ]
Testing has shown that reading multiple registers at once (for 10-bit
ADC values) does not work. Set the use_single_read regmap_config flag
to make regmap split these for us.
This should fix temperature opregion accesses done by
drivers/acpi/pmic/intel_pmic_chtdc_ti.c and is also necessary for
the upcoming drivers for the ADC and battery MFD cells.
Fixes: 6bac0606fd ("mfd: Add support for Cherry Trail Dollar Cove TI PMIC")
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250804133240.312383-1-hansg@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 70e997e0107e5ed85c1a3ef2adfccbe351c29d71 ]
The max_register = 128 setting in the regmap config is not valid.
The Intel Dollar Cove TI PMIC has an eeprom unlock register at address 0x88
and a number of EEPROM registers at 0xF?. Increase max_register to 0xff so
that these registers can be accessed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241208150028.325349-1-hdegoede@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
Stable-dep-of: 64e0d839c589 ("mfd: intel_soc_pmic_chtdc_ti: Set use_single_read regmap_config flag")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9ee94bfbe930a1b39df53fa2d7b31141b780eb5a ]
Patch series "Squashfs: performance improvement and a sanity check".
This patchset adds an additional sanity check when reading regular file
inodes, and adds support for SEEK_DATA/SEEK_HOLE lseek() whence values.
This patch (of 2):
Add an additional sanity check when reading regular file inodes.
A regular file if the file size is an exact multiple of the filesystem
block size cannot have a fragment. This is because by definition a
fragment block stores tailends which are not a whole block in size.
Link: https://lkml.kernel.org/r/20250923220652.568416-1-phillip@squashfs.org.uk
Link: https://lkml.kernel.org/r/20250923220652.568416-2-phillip@squashfs.org.uk
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 9f1c14c1de1b ("Squashfs: reject negative file sizes in squashfs_read_inode()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2f13daee2a72bb962f5fd356c3a263a6f16da965 upstream.
After commit 6f110a5e4f99 ("Disable SLUB_TINY for build testing"), which
causes CONFIG_KASAN to be enabled in allmodconfig again, arm64
allmodconfig builds with clang-17 and older show an instance of
-Wframe-larger-than (which breaks the build with CONFIG_WERROR=y):
lib/crypto/curve25519-hacl64.c:757:6: error: stack frame size (2336) exceeds limit (2048) in 'curve25519_generic' [-Werror,-Wframe-larger-than]
757 | void curve25519_generic(u8 mypublic[CURVE25519_KEY_SIZE],
| ^
When KASAN is disabled, the stack usage is roughly quartered:
lib/crypto/curve25519-hacl64.c:757:6: error: stack frame size (608) exceeds limit (128) in 'curve25519_generic' [-Werror,-Wframe-larger-than]
757 | void curve25519_generic(u8 mypublic[CURVE25519_KEY_SIZE],
| ^
Using '-Rpass-analysis=stack-frame-layout' shows the following variables
and many, many 8-byte spills when KASAN is enabled:
Offset: [SP-144], Type: Variable, Align: 8, Size: 40
Offset: [SP-464], Type: Variable, Align: 8, Size: 320
Offset: [SP-784], Type: Variable, Align: 8, Size: 320
Offset: [SP-864], Type: Variable, Align: 32, Size: 80
Offset: [SP-896], Type: Variable, Align: 32, Size: 32
Offset: [SP-1016], Type: Variable, Align: 8, Size: 120
When KASAN is disabled, there are still spills but not at many and the
variables list is smaller:
Offset: [SP-192], Type: Variable, Align: 32, Size: 80
Offset: [SP-224], Type: Variable, Align: 32, Size: 32
Offset: [SP-344], Type: Variable, Align: 8, Size: 120
Disable KASAN for this file when using clang-17 or older to avoid
blowing out the stack, clearing up the warning.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250609-curve25519-hacl64-disable-kasan-clang-v1-1-08ea0ac5ccff@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 971843c511c3c2f6eda96c6b03442913bfee6148 upstream.
Orphan info is now getting allocated with kvmalloc_array(). Free it with
kvfree() instead of kfree() to avoid complaints from mm.
Reported-by: Chris Mason <clm@meta.com>
Fixes: 0a6ce20c1564 ("ext4: verify orphan file size is not too big")
Cc: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Message-ID: <20251007134936.7291-2-jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit feb8ae81b2378b75a99c81d315602ac8918ed382 upstream.
Introduce acpi_gbl_use_global_lock, which allows to skip the Global Lock
initialization. This is useful for systems without Global Lock (such as
loong_arch), so as to avoid error messages during boot phase:
ACPI Error: Could not enable global_lock event (20240827/evxfevnt-182)
ACPI Error: No response from Global Lock hardware, disabling lock (20240827/evglock-59)
Link: https://github.com/acpica/acpica/commit/463cb0fe
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 57295e835408d8d425bef58da5253465db3d6888 upstream.
syzkaller found a path where ext4_xattr_inode_update_ref() reads an EA
inode refcount that is already <= 0 and then applies ref_change (often
-1). That lets the refcount underflow and we proceed with a bogus value,
triggering errors like:
EXT4-fs error: EA inode <n> ref underflow: ref_count=-1 ref_change=-1
EXT4-fs warning: ea_inode dec ref err=-117
Make the invariant explicit: if the current refcount is non-positive,
treat this as on-disk corruption, emit ext4_error_inode(), and fail the
operation with -EFSCORRUPTED instead of updating the refcount. Delete the
WARN_ONCE() as negative refcounts are now impossible; keep error reporting
in ext4_error_inode().
This prevents the underflow and the follow-on orphan/cleanup churn.
Reported-by: syzbot+0be4f339a8218d2a5bb1@syzkaller.appspotmail.com
Fixes: https://syzbot.org/bug?extid=0be4f339a8218d2a5bb1
Cc: stable@kernel.org
Co-developed-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com>
Signed-off-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com>
Signed-off-by: Ahmet Eray Karadag <eraykrdg1@gmail.com>
Message-ID: <20250920021342.45575-1-eraykrdg1@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 12e803c8827d049ae8f2c743ef66ab87ae898375 upstream.
During the movement of a written extent, mext_page_mkuptodate() is
called to read data in the range [from, to) into the page cache and to
update the corresponding buffers. Therefore, we should not wait on any
buffer whose start offset is >= 'to'. Otherwise, it will return -EIO and
fail the extents movement.
$ for i in `seq 3 -1 0`; \
do xfs_io -fs -c "pwrite -b 1024 $((i * 1024)) 1024" /mnt/foo; \
done
$ umount /mnt && mount /dev/pmem1s /mnt # drop cache
$ e4defrag /mnt/foo
e4defrag 1.47.0 (5-Feb-2023)
ext4 defragmentation for /mnt/foo
[1/1]/mnt/foo: 0% [ NG ]
Success: [0/1]
Cc: stable@kernel.org
Fixes: a40759fb16ae ("ext4: remove array of buffer_heads from mext_page_mkuptodate()")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20250912105841.1886799-1-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 46c22a8bb4cb03211da1100d7ee4a2005bf77c70 upstream.
Currently, our handling of metadata is _ambiguous_ in some scenarios,
that is, we end up returning unknown if the range only covers the
mapping partially.
For example, in the following case:
$ xfs_io -c fsmap -d
0: 254:16 [0..7]: static fs metadata 8
1: 254:16 [8..15]: special 102:1 8
2: 254:16 [16..5127]: special 102:2 5112
3: 254:16 [5128..5255]: special 102:3 128
4: 254:16 [5256..5383]: special 102:4 128
5: 254:16 [5384..70919]: inodes 65536
6: 254:16 [70920..70967]: unknown 48
...
$ xfs_io -c fsmap -d 24 33
0: 254:16 [24..39]: unknown 16 <--- incomplete reporting
$ xfs_io -c fsmap -d 24 33 (With patch)
0: 254:16 [16..5127]: special 102:2 5112
This is because earlier in ext4_getfsmap_meta_helper, we end up ignoring
any extent that starts before our queried range, but overlaps it. While
the man page [1] is a bit ambiguous on this, this fix makes the output
make more sense since we are anyways returning an "unknown" extent. This
is also consistent to how XFS does it:
$ xfs_io -c fsmap -d
...
6: 254:16 [104..127]: free space 24
7: 254:16 [128..191]: inodes 64
...
$ xfs_io -c fsmap -d 137 150
0: 254:16 [128..191]: inodes 64 <-- full extent returned
[1] https://man7.org/linux/man-pages/man2/ioctl_getfsmap.2.html
Reported-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <023f37e35ee280cd9baac0296cbadcbe10995cab.1757058211.git.ojaswin@linux.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9d80eaa1a1d37539224982b76c9ceeee736510b9 upstream.
After running a stress test combined with fault injection,
we performed fsck -a followed by fsck -fn on the filesystem
image. During the second pass, fsck -fn reported:
Inode 131512, end of extent exceeds allowed value
(logical block 405, physical block 1180540, len 2)
This inode was not in the orphan list. Analysis revealed the
following call chain that leads to the inconsistency:
ext4_da_write_end()
//does not update i_disksize
ext4_punch_hole()
//truncate folio, keep size
ext4_page_mkwrite()
ext4_block_page_mkwrite()
ext4_block_write_begin()
ext4_get_block()
//insert written extent without update i_disksize
journal commit
echo 1 > /sys/block/xxx/device/delete
da-write path updates i_size but does not update i_disksize. Then
ext4_punch_hole truncates the da-folio yet still leaves i_disksize
unchanged(in the ext4_update_disksize_before_punch function, the
condition offset + len < size is met). Then ext4_page_mkwrite sees
ext4_nonda_switch return 1 and takes the nodioread_nolock path, the
folio about to be written has just been punched out, and it’s offset
sits beyond the current i_disksize. This may result in a written
extent being inserted, but again does not update i_disksize. If the
journal gets committed and then the block device is yanked, we might
run into this. It should be noted that replacing ext4_punch_hole with
ext4_zero_range in the call sequence may also trigger this issue, as
neither will update i_disksize under these circumstances.
To fix this, we can modify ext4_update_disksize_before_punch to
increase i_disksize to min(i_size, offset + len) when both i_size and
(offset + len) are greater than i_disksize.
Cc: stable@kernel.org
Signed-off-by: Yongjian Sun <sunyongjian1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Message-ID: <20250911133024.1841027-1-sunyongjian@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0a6ce20c156442a4ce2a404747bb0fb05d54eeb3 upstream.
In principle orphan file can be arbitrarily large. However orphan replay
needs to traverse it all and we also pin all its buffers in memory. Thus
filesystems with absurdly large orphan files can lead to big amounts of
memory consumed. Limit orphan file size to a sane value and also use
kvmalloc() for allocating array of block descriptor structures to avoid
large order allocations for sane but large orphan files.
Reported-by: syzbot+0b92850d68d9b12934f5@syzkaller.appspotmail.com
Fixes: 02f310fcf4 ("ext4: Speedup ext4 orphan inode handling")
Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Message-ID: <20250909112206.10459-2-jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a082e4b4d08a4a0e656d90c2c05da85f23e6d0c9 upstream.
When v3 NLM request finds a conflicting delegation, it triggers
a delegation recall and nfsd_open fails with EAGAIN. nfsd_open
then translates EAGAIN into nfserr_jukebox. In nlm_fopen, instead
of returning nlm_failed for when there is a conflicting delegation,
drop this NLM request so that the client retries. Once delegation
is recalled and if a local lock is claimed, a retry would lead to
nfsd returning a nlm_lck_blocked error or a successful nlm lock.
Fixes: d343fce148 ("[PATCH] knfsd: Allow lockd to drop replies as appropriate")
Cc: stable@vger.kernel.org # v6.6
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ab1c282c010c4f327bd7addc3c0035fd8e3c1721 upstream.
Commit 5304877936 ("NFSD: Fix strncpy() fortify warning") replaced
strncpy(,, sizeof(..)) with strlcpy(,, sizeof(..) - 1), but strlcpy()
already guaranteed NUL-termination of the destination buffer and
subtracting one byte potentially truncated the source string.
The incorrect size was then carried over in commit 72f78ae00a ("NFSD:
move from strlcpy with unused retval to strscpy") when switching from
strlcpy() to strscpy().
Fix this off-by-one error by using the full size of the destination
buffer again.
Cc: stable@vger.kernel.org
Fixes: 5304877936 ("NFSD: Fix strncpy() fortify warning")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b93af2cc8e036754c0d9970d9ddc47f43cc94b9f upstream.
DAMON's virtual address space operation set implementation (vaddr) calls
pte_offset_map_lock() inside the page table walk callback function. This
is for reading and writing page table accessed bits. If
pte_offset_map_lock() fails, it retries by returning the page table walk
callback function with ACTION_AGAIN.
pte_offset_map_lock() can continuously fail if the target is a pmd
migration entry, though. Hence it could cause an infinite page table walk
if the migration cannot be done until the page table walk is finished.
This indeed caused a soft lockup when CPU hotplugging and DAMON were
running in parallel.
Avoid the infinite loop by simply not retrying the page table walk. DAMON
is promising only a best-effort accuracy, so missing access to such pages
is no problem.
Link: https://lkml.kernel.org/r/20250930004410.55228-1-sj@kernel.org
Fixes: 7780d04046 ("mm/pagewalkers: ACTION_AGAIN if pte_offset_map_lock() fails")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Xinyu Zheng <zhengxinyu6@huawei.com>
Closes: https://lore.kernel.org/20250918030029.2652607-1-zhengxinyu6@huawei.com
Acked-by: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6a204d4b14c99232e05d35305c27ebce1c009840 upstream.
Commit 524c48072e ("mm/page_alloc: rename ALLOC_HIGH to
ALLOC_MIN_RESERVE") is the start of a series that explains how __GFP_HIGH,
which implies ALLOC_MIN_RESERVE, is going to be used instead of
__GFP_ATOMIC for high atomic reserves.
Commit eb2e2b425c ("mm/page_alloc: explicitly record high-order atomic
allocations in alloc_flags") introduced ALLOC_HIGHATOMIC for such
allocations of order higher than 0. It still used __GFP_ATOMIC, though.
Then, commit 1ebbb21811 ("mm/page_alloc: explicitly define how
__GFP_HIGH non-blocking allocations accesses reserves") just turned that
check for !__GFP_DIRECT_RECLAIM, ignoring that high atomic reserves were
expected to test for __GFP_HIGH.
This leads to high atomic reserves being added for high-order GFP_NOWAIT
allocations and others that clear __GFP_DIRECT_RECLAIM, which is
unexpected. Later, those reserves lead to 0-order allocations going to
the slow path and starting reclaim.
From /proc/pagetypeinfo, without the patch:
Node 0, zone DMA, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0
Node 0, zone DMA32, type HighAtomic 1 8 10 9 7 3 0 0 0 0 0
Node 0, zone Normal, type HighAtomic 64 20 12 5 0 0 0 0 0 0 0
With the patch:
Node 0, zone DMA, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0
Node 0, zone DMA32, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0
Node 0, zone Normal, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0
Link: https://lkml.kernel.org/r/20250814172245.1259625-1-cascardo@igalia.com
Fixes: 1ebbb21811 ("mm/page_alloc: explicitly define how __GFP_HIGH non-blocking allocations accesses reserves")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Tested-by: Helen Koike <koike@igalia.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: NeilBrown <neilb@suse.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
