[ Upstream commit 8026e40608b4d552216d2a818ca7080a4264bb44 ]
Prevent move_mount from applying the attach_disconnected flag
to move_mount(). This prevents detached mounts from appearing
as / when applying mount mediation, which is not only incorrect
but could result in bad policy being generated.
Basic mount rules like
allow mount,
allow mount options=(move) -> /target/,
will allow detached mounts, allowing older policy to continue
to function. New policy gains the ability to specify `detached` as
a source option
allow mount detached -> /target/,
In addition make sure support of move_mount is advertised as
a feature to userspace so that applications that generate policy
can respond to the addition.
Note: this fixes mediation of move_mount when a detached mount is used,
it does not fix the broader regression of apparmor mediation of
mounts under the new mount api.
Link: https://lore.kernel.org/all/68c166b8-5b4d-4612-8042-1dee3334385b@leemhuis.info/T/#mb35fdde37f999f08f0b02d58dc1bf4e6b65b8da2
Fixes: 157a3537d6bc ("apparmor: Fix regression in mount mediation")
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 947dfc8138dfaeb6e966e2d661de89eb203e3064 ]
According to the Intel Software Manual for I225, Section 7.5.2.7,
hicredit should be multiplied by the constant link-rate value, 0x7736.
Currently, the old constant link-rate value, 0x7735, from the boards
supported on igb are being used, most likely due to a copy'n'paste, as
the rest of the logic is the same for both drivers.
Update hicredit accordingly.
Fixes: 1ab011b0bf ("igc: Add support for CBS offloading")
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Rodrigo Cataldo <rodrigo.cadore@l-acoustics.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 371e576ff3e8580d91d49026e5d5faebf5565558 ]
During a PCI FLR the MSI-X Enable flag in the VF PCI MSI-X capability
register will be cleared. This can lead to issues when a VF is
assigned to a VM because in these cases the VF driver receives no
indication of the PF PCI error/reset and additionally it is incapable
of restoring the cleared flag in the hypervisor configuration space
without fully reinitializing the driver interrupt functionality.
Since the VF driver is unable to easily resolve this condition on its own,
restore the VF MSI-X flag during the PF PCI reset handling.
Fixes: 19b7960b2d ("i40e: implement split PCI error reset handler")
Co-developed-by: Karen Ostrowska <karen.ostrowska@intel.com>
Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com>
Co-developed-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b036d8ef3120b996751495ce25994eea58032a98 ]
When a control changes value the return value from _put() should be 1 so
we get events generated to userspace notifying applications of the change.
While the I2S mux gets this right the S/PDIF mux does not, fix the return
value.
Fixes: c8609f3870 ("ASoC: meson: add g12a tohdmitx control")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-4-424af7a8fb91@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 172c88244b5f2d3375403ebb504d407be0fded59 ]
When a control changes value the return value from _put() should be 1 so
we get events generated to userspace notifying applications of the change.
We are checking if there has been a change and exiting early if not but we
are not providing the correct return value in the latter case, fix this.
Fixes: af2618a2ee ("ASoC: meson: g12a: add internal DAC glue driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-3-424af7a8fb91@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e001206804be3f3d21f4a1cf16e5d059d75643f ]
When writing to an enum we need to verify that the value written is valid
for the enumeration, the helper function snd_soc_item_enum_to_val() doesn't
do it since it needs to return an unsigned (and in any case we'd need to
check the return value).
Fixes: c8609f3870 ("ASoC: meson: add g12a tohdmitx control")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-2-424af7a8fb91@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3150b70e944ead909260285dfb5707d0bedcf87b ]
When writing to an enum we need to verify that the value written is valid
for the enumeration, the helper function snd_soc_item_enum_to_val() doesn't
do it since it needs to return an unsigned (and in any case we'd need to
check the return value).
Fixes: af2618a2ee ("ASoC: meson: g12a: add internal DAC glue driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-1-424af7a8fb91@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a15584e99db8918b60e507539c7446375dcf366 ]
Commit 3116f59c12 ("i40e: fix use-after-free in
i40e_sync_filters_subtask()") avoided use-after-free issues,
by increasing refcount during update the VSI filter list to
the HW. However, it missed the unicast situation.
When deleting an unicast FDB entry, the i40e driver will release
the mac_filter, and i40e_service_task will concurrently request
firmware to add the mac_filter, which will lead to the following
use-after-free issue.
Fix again for both netdev->uc and netdev->mc.
BUG: KASAN: use-after-free in i40e_aqc_add_filters+0x55c/0x5b0 [i40e]
Read of size 2 at addr ffff888eb3452d60 by task kworker/8:7/6379
CPU: 8 PID: 6379 Comm: kworker/8:7 Kdump: loaded Tainted: G
Workqueue: i40e i40e_service_task [i40e]
Call Trace:
dump_stack+0x71/0xab
print_address_description+0x6b/0x290
kasan_report+0x14a/0x2b0
i40e_aqc_add_filters+0x55c/0x5b0 [i40e]
i40e_sync_vsi_filters+0x1676/0x39c0 [i40e]
i40e_service_task+0x1397/0x2bb0 [i40e]
process_one_work+0x56a/0x11f0
worker_thread+0x8f/0xf40
kthread+0x2a0/0x390
ret_from_fork+0x1f/0x40
Allocated by task 21948:
kasan_kmalloc+0xa6/0xd0
kmem_cache_alloc_trace+0xdb/0x1c0
i40e_add_filter+0x11e/0x520 [i40e]
i40e_addr_sync+0x37/0x60 [i40e]
__hw_addr_sync_dev+0x1f5/0x2f0
i40e_set_rx_mode+0x61/0x1e0 [i40e]
dev_uc_add_excl+0x137/0x190
i40e_ndo_fdb_add+0x161/0x260 [i40e]
rtnl_fdb_add+0x567/0x950
rtnetlink_rcv_msg+0x5db/0x880
netlink_rcv_skb+0x254/0x380
netlink_unicast+0x454/0x610
netlink_sendmsg+0x747/0xb00
sock_sendmsg+0xe2/0x120
__sys_sendto+0x1ae/0x290
__x64_sys_sendto+0xdd/0x1b0
do_syscall_64+0xa0/0x370
entry_SYSCALL_64_after_hwframe+0x65/0xca
Freed by task 21948:
__kasan_slab_free+0x137/0x190
kfree+0x8b/0x1b0
__i40e_del_filter+0x116/0x1e0 [i40e]
i40e_del_mac_filter+0x16c/0x300 [i40e]
i40e_addr_unsync+0x134/0x1b0 [i40e]
__hw_addr_sync_dev+0xff/0x2f0
i40e_set_rx_mode+0x61/0x1e0 [i40e]
dev_uc_del+0x77/0x90
rtnl_fdb_del+0x6a5/0x860
rtnetlink_rcv_msg+0x5db/0x880
netlink_rcv_skb+0x254/0x380
netlink_unicast+0x454/0x610
netlink_sendmsg+0x747/0xb00
sock_sendmsg+0xe2/0x120
__sys_sendto+0x1ae/0x290
__x64_sys_sendto+0xdd/0x1b0
do_syscall_64+0xa0/0x370
entry_SYSCALL_64_after_hwframe+0x65/0xca
Fixes: 3116f59c12 ("i40e: fix use-after-free in i40e_sync_filters_subtask()")
Fixes: 41c445ff0f ("i40e: main driver core")
Signed-off-by: Ke Xiao <xiaoke@sangfor.com.cn>
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Cc: Di Zhu <zhudi2@huawei.com>
Reviewed-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01b2885d9415152bcb12ff1f7788f500a74ea0ed ]
Commit 86a7e0b69b ("net: prevent rewrite of msg_name in
sock_sendmsg()") made sock_sendmsg save the incoming msg_name pointer
and restore it before returning, to insulate the caller against
msg_name being changed by the called code. If the address length
was also changed however, we may return with an inconsistent structure
where the length doesn't match the address, and attempts to reuse it may
lead to lost packets.
For example, a kernel that doesn't have commit 1c5950fc6f ("udp6: fix
potential access to stale information") will replace a v4 mapped address
with its ipv4 equivalent, and shorten namelen accordingly from 28 to 16.
If the caller attempts to reuse the resulting msg structure, it will have
the original ipv6 (v4 mapped) address but an incorrect v4 length.
Fixes: 86a7e0b69b ("net: prevent rewrite of msg_name in sock_sendmsg()")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b29be0ca8e816119ccdf95cc7d7c7be9bde005f1 ]
In the init path, nft_data_init() bumps the chain reference counter,
decrement it on error by following the error path which calls
nft_data_release() to restore it.
Fixes: 4bedf9eee0 ("netfilter: nf_tables: fix chain binding transaction logic")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6345d2824a3f58aab82428d11645e0da861ac13 ]
This fixes openvswitch's handling of nat packets in the related state.
In nf_ct_nat_execute(), which is called from nf_ct_nat(), ICMP/ICMPv6
packets in the IP_CT_RELATED or IP_CT_RELATED_REPLY state, which have
not been dropped, will follow the goto, however the placement of the
goto label means that updating the action bit field will be bypassed.
This causes ovs_nat_update_key() to not be called from ovs_ct_nat()
which means the openvswitch match key for the ICMP/ICMPv6 packet is not
updated and the pre-nat value will be retained for the key, which will
result in the wrong openflow rule being matched for that packet.
Move the goto label above where the action bit field is being set so
that it is updated in all cases where the packet is accepted.
Fixes: ebddb14049 ("net: move the nat function to nf_nat_ovs for ovs and tc")
Signed-off-by: Brad Cowie <brad@faucet.nz>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e584f2ff1e6cc9b1d99e8a6b0f3415940d1b3eb3 ]
The flag DMA_TX_APPEND_CRC was only written to the first DMA descriptor
in the TX path, where each descriptor corresponds to a single skbuff
fragment (or the skbuff head). This led to packets with no FCS appearing
on the wire if the kernel allocated the packet in fragments, which would
always happen when using PACKET_MMAP/TPACKET (cf. tpacket_fill_skb() in
net/af_packet.c).
Fixes: 1c1008c793 ("net: bcmgenet: add main driver file")
Signed-off-by: Adrian Cinal <adriancinal1@gmail.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231228135638.1339245-1-adriancinal1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5a306aedba34e640b11d7026dbbafb78ee3a5f6 ]
In efx_probe_filters, the channel->rps_flow_id is freed in a
efx_for_each_channel marco when success equals to 0.
However, after the following call chain:
ef100_net_open
|-> efx_probe_filters
|-> ef100_net_stop
|-> efx_remove_filters
The channel->rps_flow_id is freed again in the efx_for_each_channel of
efx_remove_filters, triggering a double-free bug.
Fixes: a9dc3d5612 ("sfc_ef100: RX filter table management and related gubbins")
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Link: https://lore.kernel.org/r/20231225112915.3544581-1-alexious@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72ad3b772b6d393701df58ba1359b0bb346a19ed ]
Running a multi-arch kernel (multi_v7_defconfig) on a Raspberry Pi 3B+
with enabled CONFIG_UBSAN triggers the following warning:
UBSAN: array-index-out-of-bounds in arch/arm/mach-sunxi/mc_smp.c:810:29
index 2 is out of range for type 'sunxi_mc_smp_data [2]'
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc6-00248-g5254c0cbc92d
Hardware name: BCM2835
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x40/0x4c
dump_stack_lvl from ubsan_epilogue+0x8/0x34
ubsan_epilogue from __ubsan_handle_out_of_bounds+0x78/0x80
__ubsan_handle_out_of_bounds from sunxi_mc_smp_init+0xe4/0x4cc
sunxi_mc_smp_init from do_one_initcall+0xa0/0x2fc
do_one_initcall from kernel_init_freeable+0xf4/0x2f4
kernel_init_freeable from kernel_init+0x18/0x158
kernel_init from ret_from_fork+0x14/0x28
Since the enabled method couldn't match with any entry from
sunxi_mc_smp_data, the value of the index shouldn't be used right after
the loop. So move it after the check of ret in order to have a valid
index.
Fixes: 1631090e34 ("ARM: sun9i: smp: Add is_a83t field")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20231228193903.9078-1-wahrenst@gmx.net
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61fa2493ca76fd7bb74e13f0205274f4ab0aa696 ]
Similar to commit be80942465 ("selftests: bonding: do not set port down
before adding to bond"). The bond-arp-interval-causes-panic test failed
after commit a4abfa627c ("net: rtnetlink: Enslave device before bringing
it up") as the kernel will set the port down _after_ adding to bond if setting
port down specifically.
Fix it by removing the link down operation when adding to bond.
Fixes: 2ffd57327f ("selftests: bonding: cause oops in bond_rr_gen_slave_id")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Tested-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c476269bff2908a20930c58085bf0b05ebd569a ]
Some r8168 NICs stop working upon system resume:
[ 688.051096] r8169 0000:02:00.1 enp2s0f1: rtl_ep_ocp_read_cond == 0 (loop: 10, delay: 10000).
[ 688.175131] r8169 0000:02:00.1 enp2s0f1: Link is Down
...
[ 691.534611] r8169 0000:02:00.1 enp2s0f1: PCI error (cmd = 0x0407, status_errs = 0x0000)
Not sure if it's related, but those NICs have a BMC device at function
0:
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Realtek RealManage BMC [10ec:816e] (rev 1a)
Trial and error shows that increase the loop wait on
rtl_ep_ocp_read_cond to 30 can eliminate the issue, so let
rtl8168ep_driver_start() to wait a bit longer.
Fixes: e6d6ca6e12 ("r8169: Add support for another RTL8168FP")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8fcb0382af6f1ef50936f1be05b8149eb2f88496 ]
m->data needs to be freed when em_text_destroy is called.
Fixes: d675c989ed ("[PKT_SCHED]: Packet classification based on textsearch (ematch)")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcea1bd45e6d111cc8fc1aaefa7e31694089bda3 ]
Under heavy traffic, the BlueField Gigabit interface can
become unresponsive. This is due to a possible race condition
in the mlxbf_gige_rx_packet function, where the function exits
with producer and consumer indices equal but there are remaining
packet(s) to be processed. In order to prevent this situation,
read receive consumer index *before* the HW replenish so that
the mlxbf_gige_rx_packet function returns an accurate return
value even if a packet is received into just-replenished buffer
prior to exiting this routine. If the just-replenished buffer
is received and occupies the last RX ring entry, the interface
would not recover and instead would encounter RX packet drops
related to internal buffer shortages since the driver RX logic
is not being triggered to drain the RX ring. This patch will
address and prevent this "ring full" condition.
Fixes: f92e1869d7 ("Add Mellanox BlueField Gigabit Ethernet driver")
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38744c3fa00109c51076121c2deb4f02e2f09194 ]
AUD_PAD_TOP widget's correct register is AFE_AUD_PAD_TOP , and not zero.
Having a zero as register, it would mean that the `snd_soc_dapm_new_widgets`
would try to read the register at offset zero when trying to get the power
status of this widget, which is incorrect.
Fixes: b65c466220 ("ASoC: mediatek: mt8186: support adda in platform driver")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Link: https://lore.kernel.org/r/20231229114342.195867-1-eugen.hristev@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7afd49a38e73afd57ff62c8d1cf5af760c4d49c0 ]
Currently the driver accepts VLAN EtherType steering rules regardless of
the configured mask. And things might fail silently or with confusing error
messages to the user. The VLAN EtherType can only be matched by full
mask. Therefore, add a check for that.
For instance the following rule is invalid, but the driver accepts it and
ignores the user specified mask:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 \
| m 0x00ff action 0
|Added rule with ID 63
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 63
| Flow Type: Raw Ethernet
| Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Ethertype: 0x0 mask: 0xFFFF
| VLAN EtherType: 0x8100 mask: 0x0
| VLAN: 0x0 mask: 0xffff
| User-defined: 0x0 mask: 0xffffffffffffffff
| Action: Direct to queue 0
After:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 \
| m 0x00ff action 0
|rmgr: Cannot insert RX class rule: Operation not supported
Fixes: 2b477d057e ("igc: Integrate flex filter into ethtool ops")
Suggested-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5063cbe148b829e8eb97672c2cbccc058835476 ]
Currently the driver accepts VLAN TCI steering rules regardless of the
configured mask. And things might fail silently or with confusing error
messages to the user.
There are two ways to handle the VLAN TCI mask:
1. Match on the PCP field using a VLAN prio filter
2. Match on complete TCI field using a flex filter
Therefore, add checks and code for that.
For instance the following rule is invalid and will be converted into a
VLAN prio rule which is not correct:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan 0x0001 m 0xf000 \
| action 1
|Added rule with ID 61
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 61
| Flow Type: Raw Ethernet
| Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Ethertype: 0x0 mask: 0xFFFF
| VLAN EtherType: 0x0 mask: 0xffff
| VLAN: 0x1 mask: 0x1fff
| User-defined: 0x0 mask: 0xffffffffffffffff
| Action: Direct to queue 1
After:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan 0x0001 m 0xf000 \
| action 1
|rmgr: Cannot insert RX class rule: Operation not supported
Fixes: 7991487ecb ("igc: Allow for Flex Filters to be installed")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d05ff55ef4f4954d28551236239f297bd52ea48 ]
Disabling netdev with ethtool private flag "link-down-on-close" enabled
can cause NULL pointer dereference bug. Shut down VSI regardless of
"link-down-on-close" state.
Fixes: 8ac7132704 ("ice: Fix interface being down after reset with link-down-on-close flag on")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a8d8bb55e7001de2d50920381cc858f3a3e9fb7 ]
The driver should not report an error message when for a medialess port
the link_down_on_close flag is enabled and the physical link cannot be
set down.
Fixes: 8ac7132704 ("ice: Fix interface being down after reset with link-down-on-close flag on")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Katarzyna Wieczerzycka <katarzyna.wieczerzycka@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ee2384a5a0f3b4eeac8d10bb01a0609d245a4d1 ]
Couple of structures was not marked as __packed. This patch
fixes the same and mark them as __packed.
Fixes: 42006910b5 ("octeontx2-af: cleanup KPU config data")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c95f919567d6f1914f13350af61a1b044ac85014 ]
llcp_sock_sendmsg() calls nfc_llcp_send_ui_frame() which in turn calls
nfc_alloc_send_skb(), which accesses the nfc_dev from the llcp_sock for
getting the headroom and tailroom needed for skb allocation.
Parallelly the nfc_dev can be freed, as the refcount is decreased via
nfc_free_device(), leading to a UAF reported by Syzkaller, which can
be summarized as follows:
(1) llcp_sock_sendmsg() -> nfc_llcp_send_ui_frame()
-> nfc_alloc_send_skb() -> Dereference *nfc_dev
(2) virtual_ncidev_close() -> nci_free_device() -> nfc_free_device()
-> put_device() -> nfc_release() -> Free *nfc_dev
When a reference to llcp_local is acquired, we do not acquire the same
for the nfc_dev. This leads to freeing even when the llcp_local is in
use, and this is the case with the UAF described above too.
Thus, when we acquire a reference to llcp_local, we should acquire a
reference to nfc_dev, and release the references appropriately later.
References for llcp_local is initialized in nfc_llcp_register_device()
(which is called by nfc_register_device()). Thus, we should acquire a
reference to nfc_dev there.
nfc_unregister_device() calls nfc_llcp_unregister_device() which in
turn calls nfc_llcp_local_put(). Thus, the reference to nfc_dev is
appropriately released later.
Reported-and-tested-by: syzbot+bbe84a4010eeea00982d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=bbe84a4010eeea00982d
Fixes: c7aa12252f ("NFC: Take a reference on the LLCP local pointer when creating a socket")
Reviewed-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Siddh Raman Pant <code@siddh.me>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ae8e4cca78781401b17721bfb72718fdf7b4912 ]
Before this patch, transport offset (pkt->thoff) provides an offset
relative to the network header. This is fine for the inet families
because skb->data points to the network header in such case. However,
from netdev/egress, skb->data points to the mac header (if available),
thus, pkt->thoff is missing the mac header length.
Add skb_network_offset() to the transport offset (pkt->thoff) for
netdev, so transport header mangling works as expected. Adjust payload
fast eval function to use skb->data now that pkt->thoff provides an
absolute offset. This explains why users report that matching on
egress/netdev works but payload mangling does not.
This patch implicitly fixes payload mangling for IPv4 packets in
netdev/egress given skb_store_bits() requires an offset from skb->data
to reach the transport header.
I suspect that nft_exthdr and the trace infra were also broken from
netdev/egress because they also take skb->data as start, and pkt->thoff
was not correct.
Note that IPv6 is fine because ipv6_find_hdr() already provides a
transport offset starting from skb->data, which includes
skb_network_offset().
The bridge family also uses nft_set_pktinfo_ipv4_validate(), but there
skb_network_offset() is zero, so the update in this patch does not alter
the existing behaviour.
Fixes: 42df6e1d22 ("netfilter: Introduce egress hook")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35ba6bd582cf926a082296b7e9a876ec81136cb1 ]
After commit 26195af577 ("drm/bridge: ps8640: Drop the ability of
ps8640 to fetch the EDID"), I got an error compiling:
error: comparison of distinct pointer types
('typeof (len) *' (aka 'unsigned int *') and
'typeof (msg->size) *' (aka 'unsigned long *'))
[-Werror,-Wcompare-distinct-pointer-types]
Fix it by declaring the `len` as size_t.
The above error only shows up on downstream kernels without commit
d03eba99f5bf ("minmax: allow min()/max()/clamp() if the arguments have
the same signedness."), but since commit 26195af577 ("drm/bridge:
ps8640: Drop the ability of ps8640 to fetch the EDID") is a "Fix" that
will likely be backported it seems nice to make it easy. ...plus it's
more correct to declare `len` as size_t anyway.
Fixes: 26195af577 ("drm/bridge: ps8640: Drop the ability of ps8640 to fetch the EDID")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231218090454.1.I5c6eb80b2f746439c4b58efab788e00701d08759@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aca58eac52b88138ab98c814afb389a381725cd7 ]
For aux reads, the value `msg->size` indicates the size of the buffer
provided by `msg->buffer`. We should never in any circumstances write
more bytes to the buffer since it may overflow the buffer.
In the ti-sn65dsi86 driver there is one code path that reads the
transfer length from hardware. Even though it's never been seen to be
a problem, we should make extra sure that the hardware isn't
increasing the length since doing so would cause us to overrun the
buffer.
Fixes: 982f589bde ("drm/bridge: ti-sn65dsi86: Update reply on aux failures")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231214123752.v3.2.I7b83c0f31aeedc6b1dc98c7c741d3e1f94f040f8@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3164c8a70073d43629b4e11e083d3d2798f7750f ]
While testing, I happened to notice a random crash that looked like:
Kernel panic - not syncing: stack-protector:
Kernel stack is corrupted in: drm_dp_dpcd_probe+0x120/0x120
Analysis of drm_dp_dpcd_probe() shows that we pass in a 1-byte buffer
(allocated on the stack) to the aux->transfer() function. Presumably
if the aux->transfer() writes more than one byte to this buffer then
we're in a bad shape.
Dropping into kgdb, I noticed that "aux->transfer" pointed at
ps8640_aux_transfer().
Reading through ps8640_aux_transfer(), I can see that there are cases
where it could write more bytes to msg->buffer than were specified by
msg->size. This could happen if the hardware reported back something
bogus to us. Let's fix this so we never write more than msg->size
bytes. We'll still read all the bytes from the hardware just in case
the hardware requires it since the aux transfer data comes through an
auto-incrementing register.
NOTE: I have no actual way to reproduce this issue but it seems likely
this is what was happening in the crash I looked at.
Fixes: 13afcdd727 ("drm/bridge: parade-ps8640: Add support for AUX channel")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231214123752.v3.1.I9d1afcaad76a3e2c0ca046dc4adbc2b632c22eda@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 400f6ebbc175286576c7f7fddf3c347d09d12310 ]
On older devices (before unified image!) we can end up calling
stop_device from an rfkill interrupt. However, in stop_device
we attempt to synchronize IRQs, which then of course deadlocks.
Avoid this by checking the context, if running from the IRQ
thread then don't synchronize. This wouldn't be correct on a
new device since RSS is supported, but older devices only have
a single interrupt/queue.
Fixes: 37fb29bd1f90 ("wifi: iwlwifi: pcie: synchronize IRQs before NAPI")
Reviewed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231215111335.59aab00baed7.Iadfe154d6248e7f9dfd69522e5429dbbd72925d7@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c8874c2a6512b9fe7285cab1a6910d9211a6cfb ]
The SOC_HW_VERSION register in the BHI space is not correctly initialized
by the device and in many cases contains uninitialized data. The register
could contain 0xFFFFFFFF which is a special value to indicate a link
error in PCIe, therefore if observed, we could incorrectly think the
device is down.
Intercept reads for this register, and provide the correct value - every
production instance would read 0x60110200 if the device was operating as
intended.
Fixes: a36bf7af86 ("accel/qaic: Add MHI controller")
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208163101.1295769-3-quic_jhugo@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 971079464001c6856186ca137778e534d983174a upstream.
When commit c59a1f106f ("KVM: x86/pmu: Add IA32_PEBS_ENABLE
MSR emulation for extended PEBS") switched the initialization of
cpuc->guest_switch_msrs to use compound literals, it screwed up
the boolean logic:
+ u64 pebs_mask = cpuc->pebs_enabled & x86_pmu.pebs_capable;
...
- arr[0].guest = intel_ctrl & ~cpuc->intel_ctrl_host_mask;
- arr[0].guest &= ~(cpuc->pebs_enabled & x86_pmu.pebs_capable);
+ .guest = intel_ctrl & (~cpuc->intel_ctrl_host_mask | ~pebs_mask),
Before the patch, the value of arr[0].guest would have been intel_ctrl &
~cpuc->intel_ctrl_host_mask & ~pebs_mask. The intent is to always treat
PEBS events as host-only because, while the guest runs, there is no way
to tell the processor about the virtual address where to put PEBS records
intended for the host.
Unfortunately, the new expression can be expanded to
(intel_ctrl & ~cpuc->intel_ctrl_host_mask) | (intel_ctrl & ~pebs_mask)
which makes no sense; it includes any bit that isn't *both* marked as
exclude_guest and using PEBS. So, reinstate the old logic. Another
way to write it could be "intel_ctrl & ~(cpuc->intel_ctrl_host_mask |
pebs_mask)", presumably the intention of the author of the faulty.
However, I personally find the repeated application of A AND NOT B to
be a bit more readable.
This shows up as guest failures when running concurrent long-running
perf workloads on the host, and was reported to happen with rcutorture.
All guests on a given host would die simultaneously with something like an
instruction fault or a segmentation violation.
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Analyzed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Cc: stable@vger.kernel.org
Fixes: c59a1f106f ("KVM: x86/pmu: Add IA32_PEBS_ENABLE MSR emulation for extended PEBS")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 09eeb0723f219fbd96d8865bf9b935e03ee2ec22 upstream.
parse_server_interfaces should be in complete charge of maintaining
the iface_list linked list. Today, iface entries are removed
from the list only when the last refcount is dropped.
i.e. in release_iface. However, this can result in undercounting
of refcount if the server stops advertising interfaces (which
Azure SMB server does).
This change puts parse_server_interfaces in full charge of
maintaining the iface_list. So if an empty list is returned
by the server, the entries in the list will immediately be
removed. This way, a following call to the same function will
not find entries in the list.
Fixes: aa45dadd34 ("cifs: change iface_list from array to sorted linked list")
Cc: stable@vger.kernel.org
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7257bcf3bdc785eabc4eef1f329a59815b032508 upstream.
cifs_chan_is_iface_active checks the channels of a session to see
if the associated iface is active. This should always happen
with chan_lock held. However, these two callers of this function
were missing this locking.
This change makes sure the function calls are protected with
proper locking.
Fixes: b54034a73b ("cifs: during reconnect, update interface if necessary")
Fixes: fa1d0508bdd4 ("cifs: account for primary channel in the interface list")
Cc: stable@vger.kernel.org
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 18a434f32fa61b3fda8ddcd9a63d5274569c6a41 upstream.
There is a HP ZBook which using ALC236 codec and need the
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make mute LED
and micmute LED work.
[ confirmed that the new entries are for new models that have no
proper name, so the strings are left as "HP" which will be updated
eventually later -- tiwai ]
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240102024916.19093-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
