[ Upstream commit 6f75cd166a ]
ncsi_channel_is_tx() determines whether a given channel should be
used for Tx or not. However, when reconfiguring the channel by
handling a Configuration Required AEN, there is a misjudgment that
the channel Tx has already been enabled, which results in the Enable
Channel Network Tx command not being sent.
Clear the channel Tx enable flag before reconfiguring the channel to
avoid the misjudgment.
Fixes: 8d951a75d0 ("net/ncsi: Configure multi-package, multi-channel modes with failover")
Signed-off-by: Cosmo Chou <chou.cosmo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5749639f2 ]
In qedi_probe() we call __qedi_probe() which initializes
&qedi->recovery_work with qedi_recovery_handler() and
&qedi->board_disable_work with qedi_board_disable_work().
When qedi_schedule_recovery_handler() is called, schedule_delayed_work()
will finally start the work.
In qedi_remove(), which is called to remove the driver, the following
sequence may be observed:
Fix this by finishing the work before cleanup in qedi_remove().
CPU0 CPU1
|qedi_recovery_handler
qedi_remove |
__qedi_remove |
iscsi_host_free |
scsi_host_put |
//free shost |
|iscsi_host_for_each_session
|//use qedi->shost
Cancel recovery_work and board_disable_work in __qedi_remove().
Fixes: 4b1068f5d7 ("scsi: qedi: Add MFW error recovery process")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Link: https://lore.kernel.org/r/20230413033422.28003-1-zyytlz.wz@163.com
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8c5d45f82 ]
In verity_end_io(), if bi_status is not BLK_STS_OK, it can be return
directly. But if FEC configured, it is desired to correct the data page
through verity_verify_io. And the return value will be converted to
blk_status and passed to verity_finish_io().
BTW, when a bit is set in v->validated_blocks, verity_verify_io() skips
verification regardless of I/O error for the corresponding bio. In this
case, the I/O error could not be returned properly, and as a result,
there is a problem that abnormal data could be read for the
corresponding block.
To fix this problem, when an I/O error occurs, do not skip verification
even if the bit related is set in v->validated_blocks.
Fixes: 843f38d382 ("dm verity: add 'check_at_most_once' option to only validate hashes once")
Cc: stable@vger.kernel.org
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Yeongjin Gil <youngjin.gil@samsung.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c0468e054 ]
Without FEC, dm-verity won't call verity_handle_err() when I/O fails,
but with FEC enabled, it currently does even if an I/O error has
occurred.
If there is an I/O error and FEC correction fails, return the error
instead of calling verity_handle_err() again.
Suggested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Akilesh Kailash <akailash@google.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Stable-dep-of: e8c5d45f82 ("dm verity: fix error handling for check_at_most_once on FEC")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 043f85ce81 ]
Using flexible array is more straight forward. It
- saves 1 pointer in the 'zynqmp_ipi_pdata' structure
- saves an indirection when using this array
- saves some LoC and avoids some always spurious pointer arithmetic
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Stable-dep-of: f72f805e72 ("mailbox: zynqmp: Fix counts of child nodes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45121ad4a1 ]
The PSP IRQ is edge-triggered (MSI or MSI-X) in all cases supported by
the psp module so clear the interrupt status register early in the
handler to prevent missed interrupts. sev_irq_handler() calls wake_up()
on a wait queue, which can result in a new command being submitted from
a different CPU. This then races with the clearing of isr and can result
in missed interrupts. A missed interrupt results in a command waiting
until it times out, which results in the psp being declared dead.
This is unlikely on bare metal, but has been observed when running
virtualized. In the cases where this is observed, sev->cmdresp_reg has
PSP_CMDRESP_RESP set which indicates that the command was processed
correctly but no interrupt was asserted.
The full sequence of events looks like this:
CPU 1: submits SEV cmd #1
CPU 1: calls wait_event_timeout()
CPU 0: enters psp_irq_handler()
CPU 0: calls sev_handler()->wake_up()
CPU 1: wakes up; finishes processing cmd #1
CPU 1: submits SEV cmd #2
CPU 1: calls wait_event_timeout()
PSP: finishes processing cmd #2; interrupt status is still set; no interrupt
CPU 0: clears intsts
CPU 0: exits psp_irq_handler()
CPU 1: wait_event_timeout() times out; psp_dead=true
Fixes: 200664d523 ("crypto: ccp: Add Secure Encrypted Virtualization (SEV) command support")
Cc: stable@vger.kernel.org
Signed-off-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c339fb4d8 ]
In ring_buffer_reset_online_cpus, the buffer_size_kb write operation
may permanently fail if the cpu_online_mask changes between two
for_each_online_buffer_cpu loops. The number of increases and decreases
on both cpu_buffer->resize_disabled and cpu_buffer->record_disabled may be
inconsistent, causing some CPUs to have non-zero values for these atomic
variables after the function returns.
This issue can be reproduced by "echo 0 > trace" while hotplugging cpu.
After reproducing success, we can find out buffer_size_kb will not be
functional anymore.
To prevent leaving 'resize_disabled' and 'record_disabled' non-zero after
ring_buffer_reset_online_cpus returns, we ensure that each atomic variable
has been set up before atomic_sub() to it.
Link: https://lore.kernel.org/linux-trace-kernel/20230426062027.17451-1-Tze-nan.Wu@mediatek.com
Cc: stable@vger.kernel.org
Cc: <mhiramat@kernel.org>
Cc: npiggin@gmail.com
Fixes: b23d7a5f4a ("ring-buffer: speed up buffer resets by avoiding synchronize_rcu for each CPU")
Reviewed-by: Cheng-Jui Wang <cheng-jui.wang@mediatek.com>
Signed-off-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 094fb49a2d ]
If userspace races tcsetattr() with a write, the drained condition
might not be guaranteed by the kernel. There is a race window after
checking Tx is empty before tty_set_termios() takes termios_rwsem for
write. During that race window, more characters can be queued by a
racing writer.
Any ongoing transmission might produce garbage during HW's
->set_termios() call. The intent of TCSADRAIN/FLUSH seems to be
preventing such a character corruption. If those flags are set, take
tty's write lock to stop any writer before performing the lower layer
Tx empty check and wait for the pending characters to be sent (if any).
The initial wait for all-writers-done must be placed outside of tty's
write lock to avoid deadlock which makes it impossible to use
tty_wait_until_sent(). The write lock is retried if a racing write is
detected.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230317113318.31327-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c1592a8994 upstream.
Toggle deleted anonymous sets as inactive in the next generation, so
users cannot perform any update on it. Clear the generation bitmask
in case the transaction is aborted.
The following KASAN splat shows a set element deletion for a bound
anonymous set that has been already removed in the same transaction.
[ 64.921510] ==================================================================
[ 64.923123] BUG: KASAN: wild-memory-access in nf_tables_commit+0xa24/0x1490 [nf_tables]
[ 64.924745] Write of size 8 at addr dead000000000122 by task test/890
[ 64.927903] CPU: 3 PID: 890 Comm: test Not tainted 6.3.0+ #253
[ 64.931120] Call Trace:
[ 64.932699] <TASK>
[ 64.934292] dump_stack_lvl+0x33/0x50
[ 64.935908] ? nf_tables_commit+0xa24/0x1490 [nf_tables]
[ 64.937551] kasan_report+0xda/0x120
[ 64.939186] ? nf_tables_commit+0xa24/0x1490 [nf_tables]
[ 64.940814] nf_tables_commit+0xa24/0x1490 [nf_tables]
[ 64.942452] ? __kasan_slab_alloc+0x2d/0x60
[ 64.944070] ? nf_tables_setelem_notify+0x190/0x190 [nf_tables]
[ 64.945710] ? kasan_set_track+0x21/0x30
[ 64.947323] nfnetlink_rcv_batch+0x709/0xd90 [nfnetlink]
[ 64.948898] ? nfnetlink_rcv_msg+0x480/0x480 [nfnetlink]
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 44750f1536 upstream.
While stressing EAS on my dragonboard RB3, I have noticed that LITTLE cores
where never selected as the most energy efficient CPU whatever the
utilization level of waking task.
energy model framework uses its cost field to estimate the energy with
the formula:
nrg = cost of the selected OPP * utilization / CPU's max capacity
which ends up selecting the CPU with lowest cost / max capacity ration
as long as the utilization fits in the OPP's capacity.
If we compare the cost of a little OPP with similar capacity of a big OPP
like :
OPP(kHz) OPP capacity cost max capacity cost/max capacity
LITTLE 1766400 407 351114 407 863
big 1056000 408 520267 1024 508
This can be interpreted as the LITTLE core consumes 70% more than big core
for the same compute capacity.
According to [1], LITTLE consumes 10% less than big core for Coremark
benchmark at those OPPs. If we consider that everything else stays
unchanged, the dynamic-power-coefficient of LITTLE core should be
only 53% of the current value: 290 * 53% = 154
Set the dynamic-power-coefficient of CPU0-3 to 154 to fix the energy model.
[1] https://github.com/kdrag0n/freqbench/tree/master/results/sdm845/main
Fixes: 0e0a8e35d7 ("arm64: dts: qcom: sdm845: correct dynamic power coefficients")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230106164618.1845281-1-vincent.guittot@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0af462f19e upstream.
The recent fix to ensure atomicity of lookup and allocation inadvertently
broke the pool refill mechanism.
Prior to that change debug_objects_activate() and debug_objecs_assert_init()
invoked debug_objecs_init() to set up the tracking object for statically
initialized objects. That's not longer the case and debug_objecs_init() is
now the only place which does pool refills.
Depending on the number of statically initialized objects this can be
enough to actually deplete the pool, which was observed by Ido via a
debugobjects OOM warning.
Restore the old behaviour by adding explicit refill opportunities to
debug_objects_activate() and debug_objecs_assert_init().
Fixes: 63a759694e ("debugobject: Prevent init race with static objects")
Reported-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/871qk05a9d.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 59b37fe52f upstream.
Instead of reloading the shadow call stack pointer from the ordinary
stack, which may be vulnerable to the kind of gadget based attacks
shadow call stacks were designed to prevent, let's store a task's shadow
call stack pointer in the task struct when switching to the shadow IRQ
stack.
Given that currently, the task_struct::scs_sp field is only used to
preserve the shadow call stack pointer while a task is scheduled out or
running in user space, reusing this field to preserve and restore it
while running off the IRQ stack must be safe, as those occurrences are
guaranteed to never overlap. (The stack switching logic only switches
stacks when running from the task stack, and so the value being saved
here always corresponds to the task mode shadow stack)
While at it, fold a mov/add/mov sequence into a single add.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230109174800.3286265-3-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ardb: v5.10 backport, which doesn't have call_on_irq_stack() yet *]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2198d07c50 upstream.
All occurrences of the scs_load macro load the value of the shadow call
stack pointer from the task which is current at that point. So instead
of taking a task struct register argument in the scs_load macro to
specify the task struct to load from, let's always reference the current
task directly. This should make it much harder to exploit any
instruction sequences reloading the shadow call stack pointer register
from memory.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230109174800.3286265-2-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3d32aaa7e6 upstream.
syzkaller found the following problematic rwsem locking (with write
lock already held):
down_read+0x9d/0x450 kernel/locking/rwsem.c:1509
dm_get_inactive_table+0x2b/0xc0 drivers/md/dm-ioctl.c:773
__dev_status+0x4fd/0x7c0 drivers/md/dm-ioctl.c:844
table_clear+0x197/0x280 drivers/md/dm-ioctl.c:1537
In table_clear, it first acquires a write lock
https://elixir.bootlin.com/linux/v6.2/source/drivers/md/dm-ioctl.c#L1520
down_write(&_hash_lock);
Then before the lock is released at L1539, there is a path shown above:
table_clear -> __dev_status -> dm_get_inactive_table -> down_read
https://elixir.bootlin.com/linux/v6.2/source/drivers/md/dm-ioctl.c#L773
down_read(&_hash_lock);
It tries to acquire the same read lock again, resulting in the deadlock
problem.
Fix this by moving table_clear()'s __dev_status() call to after its
up_write(&_hash_lock);
Cc: stable@vger.kernel.org
Reported-by: Zheng Zhang <zheng.zhang@email.ucr.edu>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 604e6681e1 upstream.
Since the introduction of scrub interface, the only flag that we support
is BTRFS_SCRUB_READONLY. Thus there is no sanity checks, if there are
some undefined flags passed in, we just ignore them.
This is problematic if we want to introduce new scrub flags, as we have
no way to determine if such flags are supported.
Address the problem by introducing a check for the flags, and if
unsupported flags are set, return -EOPNOTSUPP to inform the user space.
This check should be backported for all supported kernels before any new
scrub flags are introduced.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d7f74e9a91 ]
If the data version returned from the server is larger than expected,
the local data is invalidated, but we may still want to note the remote
file size.
Since we're setting change_size, we have to also set data_changed
for the i_size to get updated.
Fixes: 3f4aa98181 ("afs: Fix EOF corruption")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f376c47966 ]
It seems that this driver was developed based on preliminary documentation.
Report the correct names for all TQMxE39x variants, as they are used by
the released hardware revisions:
- Fix names for TQMxE39C1/C2 board IDs
- Distinguish TQMxE39M and TQMxE39S, which use the same board ID
The TQMxE39M/S are distinguished using the SAUC (Sanctioned Alternate
Uses Configuration) register of the GPIO controller. This also prepares
for the correct handling of the differences between the GPIO controllers
of our COMe and SMARC modules.
Fixes: 2f17dd34ff ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/aca9a7cb42a85181bcb456c437554d2728e708ec.1676892223.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16b2ad150f ]
No TQMx90UC exists at the moment, and it is undecided whether ID 10 will
be used eventually (and if it is, how that SoM will be named).
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Stable-dep-of: 051c69ff4f ("mfd: tqmx86: Specify IO port register range more precisely")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1be1b23696 ]
The I2C_DETECT register is at IO port 0x1a7, which is outside the range
passed to devm_ioport_map() for io_base, and was only working because
there aren't actually any bounds checks for IO port accesses.
Extending the range does not seem like a good solution here, as it would
then conflict with the IO resource assigned to the I2C controller. As
this is just a one-off access during probe, use a simple inb() instead.
While we're at it, drop the unused define TQMX86_REG_I2C_INT_EN.
Fixes: 2f17dd34ff ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/e8300a30f0791afb67d79db8089fb6004855f378.1676892223.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a251994a44 ]
The dw-edma driver stops after processing a DMA request even if a request
remains in the issued queue, which is not the expected behavior. The DMA
engine API requires continuous processing.
Add a trigger to start after one processing finished if there are requests
remain.
Fixes: e63d79d1ff ("dmaengine: Add Synopsys eDMA IP core driver")
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Link: https://lore.kernel.org/r/20230411101758.438472-1-mie@igel.co.jp
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7a4e58258 ]
The clks "main" and "mm" are prepared in .probe() (and unprepared in
.remove()). This results in the clocks being on during suspend which
results in unnecessarily increased power consumption.
Remove the clock operations from .probe() and .remove(). Add the
clk_prepare_enable() in .enable() and the clk_disable_unprepare() in
.disable().
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
[thierry.reding@gmail.com: squashed in fixup patch]
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Stable-dep-of: 36dd7f530a ("pwm: mtk-disp: Disable shadow registers before setting backlight values")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b7b5736ff ]
pwmchip_remove() returns always 0. Don't use the value to make it
possible to eventually change the function to return void. Also the
driver core ignores the return value of mtk_disp_pwm_remove().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Stable-dep-of: 36dd7f530a ("pwm: mtk-disp: Disable shadow registers before setting backlight values")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1087c29e9 ]
Commit 96f524105b ("leds: tca6507: use fwnode API instead of OF")
changed to fwnode API but did not take into account that a missing property
"linux,default-trigger" now seems to return an error and as a side effect
sets value to -1. This seems to be different from of_get_property() which
always returned NULL in any case of error.
Neglecting this side-effect leads to
[ 11.201965] Unable to handle kernel paging request at virtual address ffffffff when read
in the strcmp() of led_trigger_set_default() if there is no led-trigger
defined in the DTS.
I don't know if this was recently introduced somewhere in the fwnode lib
or if the effect was missed in initial testing. Anyways it seems to be a
bug to ignore the error return value of an optional value here in the
driver.
Fixes: 96f524105b ("leds: tca6507: use fwnode API instead of OF")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/cbae7617db83113de726fcc423a805ebaa1bfca6.1680433978.git.hns@goldelico.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a61079efc8 ]
REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.
Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.
Therefore, change the use of "depends on REGMAP" to "select REGMAP".
Fixes: 3fce8e1eb9 ("leds: TI LMU: Add common code for TI LMU devices")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230226053953.4681-5-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 835659598c ]
Syzbot found the following issue:
loop0: detected capacity change from 0 to 2048
EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 without journal. Quota mode: none.
==================================================================
BUG: KASAN: use-after-free in ext4_ext_binsearch_idx fs/ext4/extents.c:768 [inline]
BUG: KASAN: use-after-free in ext4_find_extent+0x76e/0xd90 fs/ext4/extents.c:931
Read of size 4 at addr ffff888073644750 by task syz-executor420/5067
CPU: 0 PID: 5067 Comm: syz-executor420 Not tainted 6.2.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1b1/0x290 lib/dump_stack.c:106
print_address_description+0x74/0x340 mm/kasan/report.c:306
print_report+0x107/0x1f0 mm/kasan/report.c:417
kasan_report+0xcd/0x100 mm/kasan/report.c:517
ext4_ext_binsearch_idx fs/ext4/extents.c:768 [inline]
ext4_find_extent+0x76e/0xd90 fs/ext4/extents.c:931
ext4_clu_mapped+0x117/0x970 fs/ext4/extents.c:5809
ext4_insert_delayed_block fs/ext4/inode.c:1696 [inline]
ext4_da_map_blocks fs/ext4/inode.c:1806 [inline]
ext4_da_get_block_prep+0x9e8/0x13c0 fs/ext4/inode.c:1870
ext4_block_write_begin+0x6a8/0x2290 fs/ext4/inode.c:1098
ext4_da_write_begin+0x539/0x760 fs/ext4/inode.c:3082
generic_perform_write+0x2e4/0x5e0 mm/filemap.c:3772
ext4_buffered_write_iter+0x122/0x3a0 fs/ext4/file.c:285
ext4_file_write_iter+0x1d0/0x18f0
call_write_iter include/linux/fs.h:2186 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x7dc/0xc50 fs/read_write.c:584
ksys_write+0x177/0x2a0 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f4b7a9737b9
RSP: 002b:00007ffc5cac3668 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f4b7a9737b9
RDX: 00000000175d9003 RSI: 0000000020000200 RDI: 0000000000000004
RBP: 00007f4b7a933050 R08: 0000000000000000 R09: 0000000000000000
R10: 000000000000079f R11: 0000000000000246 R12: 00007f4b7a9330e0
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Above issue is happens when enable bigalloc and inline data feature. As
commit 131294c35e fixed delayed allocation bug in ext4_clu_mapped for
bigalloc + inline. But it only resolved issue when has inline data, if
inline data has been converted to extent(ext4_da_convert_inline_data_to_extent)
before writepages, there is no EXT4_STATE_MAY_INLINE_DATA flag. However
i_data is still store inline data in this scene. Then will trigger UAF
when find extent.
To resolve above issue, there is need to add judge "ext4_has_inline_data(inode)"
in ext4_clu_mapped().
Fixes: 131294c35e ("ext4: fix delayed allocation bug in ext4_clu_mapped for bigalloc + inline")
Reported-by: syzbot+bf4bb7731ef73b83a3b4@syzkaller.appspotmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Tested-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20230406111627.1916759-1-tudor.ambarus@linaro.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
