commit 2ca06a2f65310aeef30bb69b7405437a14766e4d upstream.
mptcp_cleanup_rbuf() is responsible to send acks when the user-space
reads enough data to update the receive windows significantly.
It tries hard to avoid acquiring the subflow sockets locks by checking
conditions similar to the ones implemented at the TCP level.
To avoid too much code duplication - the MPTCP protocol can't reuse the
TCP helpers as part of the relevant status is maintained into the msk
socket - and multiple costly window size computation, mptcp_cleanup_rbuf
uses a rough estimate for the most recently advertised window size:
the MPTCP receive free space, as recorded as at last-ack time.
Unfortunately the above does not allow mptcp_cleanup_rbuf() to detect
a zero to non-zero win change in some corner cases, skipping the
tcp_cleanup_rbuf call and leaving the peer stuck.
After commit ea66758c17 ("tcp: allow MPTCP to update the announced
window"), MPTCP has actually cheap access to the announced window value.
Use it in mptcp_cleanup_rbuf() for a more accurate ack generation.
Fixes: e3859603ba ("mptcp: better msk receive window updates")
Cc: stable@vger.kernel.org
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/20250107131845.5e5de3c5@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250113-net-mptcp-connect-st-flakes-v1-1-0d986ee7b1b6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cacd9ae4bf801ff4125d8961bb9a3ba955e51680 ]
As the comment above waitqueue_active() explains, it can only be used
if both waker and waiter have mb()'s that pair with each other. However
__pollwait() is broken in this respect.
This is not pipe-specific, but let's look at pipe_poll() for example:
poll_wait(...); // -> __pollwait() -> add_wait_queue()
LOAD(pipe->head);
LOAD(pipe->head);
In theory these LOAD()'s can leak into the critical section inside
add_wait_queue() and can happen before list_add(entry, wq_head), in this
case pipe_poll() can race with wakeup_pipe_readers/writers which do
smp_mb();
if (waitqueue_active(wq_head))
wake_up_interruptible(wq_head);
There are more __pollwait()-like functions (grep init_poll_funcptr), and
it seems that at least ep_ptable_queue_proc() has the same problem, so the
patch adds smp_mb() into poll_wait().
Link: https://lore.kernel.org/all/20250102163320.GA17691@redhat.com/
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250107162717.GA18922@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd4a7b2e6a2437a5502910c08128ea3bad55a80b ]
acpi_dev_irq_override() gets called approx. 30 times during boot (15 legacy
IRQs * 2 override_table entries). Of these 30 calls at max 1 will match
the non DMI checks done by acpi_dev_irq_override(). The dmi_check_system()
check is by far the most expensive check done by acpi_dev_irq_override(),
make this call the last check done by acpi_dev_irq_override() so that it
will be called at max 1 time instead of 30 times.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20241228165253.42584-1-hdegoede@redhat.com
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5a8b6446c0d370716f193771ccacf3260a57534 ]
Instead of storing an opaque string, call security_secctx_to_secid()
right in the "secctx" command handler and store only the numeric
"secid". This eliminates an unnecessary string allocation and allows
the daemon to receive errors when writing the "secctx" command instead
of postponing the error to the "bind" command handler. For example,
if the kernel was built without `CONFIG_SECURITY`, "bind" will return
`EOPNOTSUPP`, but the daemon doesn't know why. With this patch, the
"secctx" will instead return `EOPNOTSUPP` which is the right context
for this error.
This patch adds a boolean flag `have_secid` because I'm not sure if we
can safely assume that zero is the special secid value for "not set".
This appears to be true for SELinux, Smack and AppArmor, but since
this attribute is not documented, I'm unable to derive a stable
guarantee for that.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241209141554.638708-1-max.kellermann@ionos.com/
Link: https://lore.kernel.org/r/20241213135013.2964079-6-dhowells@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 973b710b8821c3401ad7a25360c89e94b26884ac ]
Tell tar to ignore silly-rename files (".__afs*" and ".nfs*") when building
the header archive. These occur when a file that is open is unlinked
locally, but hasn't yet been closed. Such files are visible to the user
via the getdents() syscall and so programs may want to do things with them.
During the kernel build, such files may be made during the processing of
header files and the cleanup may get deferred by fput() which may result in
tar seeing these files when it reads the directory, but they may have
disappeared by the time it tries to open them, causing tar to fail with an
error. Further, we don't want to include them in the tarball if they still
exist.
With CONFIG_HEADERS_INSTALL=y, something like the following may be seen:
find: './kernel/.tmp_cpio_dir/include/dt-bindings/reset/.__afs2080': No such file or directory
tar: ./include/linux/greybus/.__afs3C95: File removed before we read it
The find warning doesn't seem to cause a problem.
Fix this by telling tar when called from in gen_kheaders.sh to exclude such
files. This only affects afs and nfs; cifs uses the Windows Hidden
attribute to prevent the file from being seen.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241213135013.2964079-2-dhowells@redhat.com
cc: Masahiro Yamada <masahiroy@kernel.org>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-kernel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b579d6fdc3a9149bb4d2b3133cc0767130ed13e6 ]
Ensure we propagate npwg to the target as well instead
of assuming its the same logical blocks per physical block.
This ensures devices with large IUs information properly
propagated on the target.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 093f70c134f70e4632b295240f07d2b50b74e247 ]
When this controller is a target, the NACK handling had two issues.
First, the return value from the backend was not checked on the initial
WRITE_REQUESTED. So, the driver missed to send a NACK in this case.
Also, the NACK always arrives one byte late on the bus, even in the
WRITE_RECEIVED case. This seems to be a HW issue. We should then not
rely on the backend to correctly NACK the superfluous byte as well. Fix
both issues by introducing a flag which gets set whenever the backend
requests a NACK and keep sending it until we get a STOP condition.
Fixes: de20d1857d ("i2c: rcar: add slave support")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca89f73394daf92779ddaa37b42956f4953f3941 ]
When misconfigured, the initial setup of the current mux channel can
fail, too. It must be checked as well.
Fixes: 50a5ba8769 ("i2c: mux: demux-pinctrl: add driver")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d15638bf76ad47874ecb5dc386f0945fc0b2a875 ]
This reverts commit 98d1fb94ce75f39febd456d6d3cbbe58b6678795.
The commit uses data nbits instead of addr nbits for dummy phase. This
causes a regression for all boards where spi-tx-bus-width is smaller
than spi-rx-bus-width. It is a common pattern for boards to have
spi-tx-bus-width == 1 and spi-rx-bus-width > 1. The regression causes
all reads with a dummy phase to become unavailable for such boards,
leading to a usually slower 0-dummy-cycle read being selected.
Most controllers' supports_op hooks call spi_mem_default_supports_op().
In spi_mem_default_supports_op(), spi_mem_check_buswidth() is called to
check if the buswidths for the op can actually be supported by the
board's wiring. This wiring information comes from (among other things)
the spi-{tx,rx}-bus-width DT properties. Based on these properties,
SPI_TX_* or SPI_RX_* flags are set by of_spi_parse_dt().
spi_mem_check_buswidth() then uses these flags to make the decision
whether an op can be supported by the board's wiring (in a way,
indirectly checking against spi-{rx,tx}-bus-width).
Now the tricky bit here is that spi_mem_check_buswidth() does:
if (op->dummy.nbytes &&
spi_check_buswidth_req(mem, op->dummy.buswidth, true))
return false;
The true argument to spi_check_buswidth_req() means the op is treated as
a TX op. For a board that has say 1-bit TX and 4-bit RX, a 4-bit dummy
TX is considered as unsupported, and the op gets rejected.
The commit being reverted uses the data buswidth for dummy buswidth. So
for reads, the RX buswidth gets used for the dummy phase, uncovering
this issue. In reality, a dummy phase is neither RX nor TX. As the name
suggests, these are just dummy cycles that send or receive no data, and
thus don't really need to have any buswidth at all.
Ideally, dummy phases should not be checked against the board's wiring
capabilities at all, and should only be sanity-checked for having a sane
buswidth value. Since we are now at rc7 and such a change might
introduce many unexpected bugs, revert the commit for now. It can be
sent out later along with the spi_mem_check_buswidth() fix.
Fixes: 98d1fb94ce75 ("mtd: spi-nor: core: replace dummy buswidth from addr to data")
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Closes: https://lore.kernel.org/linux-mtd/3342163.44csPzL39Z@steina-w/
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2c68cea431d65292b592c9f8446c918d45fcf78 ]
Fix several issues with division of negative numbers in the tmp513
driver.
The docs on the DIV_ROUND_CLOSEST macro explain that dividing a negative
value by an unsigned type is undefined behavior. The driver was doing
this in several places, i.e. data->shunt_uohms has type of u32. The
actual "undefined" behavior is that it converts both values to unsigned
before doing the division, for example:
int ret = DIV_ROUND_CLOSEST(-100, 3U);
results in ret == 1431655732 instead of -33.
Furthermore the MILLI macro has a type of unsigned long. Multiplying a
signed long by an unsigned long results in an unsigned long.
So, we need to cast both MILLI and data data->shunt_uohms to long when
using the DIV_ROUND_CLOSEST macro.
Fixes: f07f9d2467f4 ("hwmon: (tmp513) Use SI constants from units.h")
Fixes: 59dfa75e5d ("hwmon: Add driver for Texas Instruments TMP512/513 sensor chips.")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20250114-fix-si-prefix-macro-sign-bugs-v1-1-696fd8d10f00@baylibre.com
[groeck: Drop some continuation lines]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4b5ccd392b92300a2b341705cc4805681094e49 ]
After a job completes, the corresponding pointer in the device must
be set to NULL. Failing to do so triggers a warning when unloading
the driver, as it appears the job is still active. To prevent this,
assign the job pointer to NULL after completing the job, indicating
the job has finished.
Fixes: 14d1d19086 ("drm/v3d: Remove the bad signaled() implementation.")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113154741.67520-1-mcanal@igalia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c08d3e62b2e73e14da318a1d20b52d0486a28ee0 ]
User added steering rules at RDMA_TX were being added to the first prio,
which is the counters prio.
Fix that so that they are correctly added to the BYPASS_PRIO instead.
Fixes: 24670b1a31 ("net/mlx5: Add support for RDMA TX steering")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c17ff476f53afb30f90bb3c2af77de069c81a622 ]
If coalesce_count is greater than 255 it will not fit in the register and
will overflow. This can be reproduced by running
# ethtool -C ethX rx-frames 256
which will result in a timeout of 0us instead. Fix this by checking for
invalid values and reporting an error.
Fixes: 8a3b7a252d ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://patch.msgid.link/20250113163001.2335235-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46841c7053e6d25fb33e0534ef023833bf03e382 ]
gtp_newlink() links the gtp device to a list in dev_net(dev).
However, even after the gtp device is moved to another netns,
it stays on the list but should be invisible.
Let's use for_each_netdev_rcu() for netdev traversal in
gtp_genl_dump_pdp().
Note that gtp_dev_list is no longer used under RCU, so list
helpers are converted to the non-RCU variant.
Fixes: 459aa660eb ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Reported-by: Xiao Liang <shaw.leon@gmail.com>
Closes: https://lore.kernel.org/netdev/CABAhCOQdBL6h9M2C+kd+bGivRJ9Q72JUxW+-gur0nub_=PmFPA@mail.gmail.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6eedda01b2bfdcf427b37759e053dc27232f3af1 ]
exit_batch_rtnl() is called while RTNL is held,
and devices to be unregistered can be queued in the dev_kill_list.
This saves one rtnl_lock()/rtnl_unlock() pair per netns
and one unregister_netdevice_many() call per netns.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/20240206144313.2050392-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 46841c7053e6 ("gtp: Use for_each_netdev_rcu() in gtp_genl_dump_pdp().")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd4f101edbd9f99567ab2adb1f2169579ede7c13 ]
Many (struct pernet_operations)->exit_batch() methods have
to acquire rtnl.
In presence of rtnl mutex pressure, this makes cleanup_net()
very slow.
This patch adds a new exit_batch_rtnl() method to reduce
number of rtnl acquisitions from cleanup_net().
exit_batch_rtnl() handlers are called while rtnl is locked,
and devices to be killed can be queued in a list provided
as their second argument.
A single unregister_netdevice_many() is called right
before rtnl is released.
exit_batch_rtnl() handlers are called before ->exit() and
->exit_batch() handlers.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/20240206144313.2050392-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 46841c7053e6 ("gtp: Use for_each_netdev_rcu() in gtp_genl_dump_pdp().")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76201b5979768500bca362871db66d77cb4c225e ]
Passing a sufficient amount of imix entries leads to invalid access to the
pkt_dev->imix_entries array because of the incorrect boundary check.
UBSAN: array-index-out-of-bounds in net/core/pktgen.c:874:24
index 20 is out of range for type 'imix_pkt [20]'
CPU: 2 PID: 1210 Comm: bash Not tainted 6.10.0-rc1 #121
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Call Trace:
<TASK>
dump_stack_lvl lib/dump_stack.c:117
__ubsan_handle_out_of_bounds lib/ubsan.c:429
get_imix_entries net/core/pktgen.c:874
pktgen_if_write net/core/pktgen.c:1063
pde_write fs/proc/inode.c:334
proc_reg_write fs/proc/inode.c:346
vfs_write fs/read_write.c:593
ksys_write fs/read_write.c:644
do_syscall_64 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe arch/x86/entry/entry_64.S:130
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 52a62f8603 ("pktgen: Parse internet mix (imix) input")
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
[ fp: allow to fill the array completely; minor changelog cleanup ]
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47e55e4b410f7d552e43011baa5be1aab4093990 ]
Commit in a fixes tag attempted to fix the issue in the following
sequence of calls:
do_output
-> ovs_vport_send
-> dev_queue_xmit
-> __dev_queue_xmit
-> netdev_core_pick_tx
-> skb_tx_hash
When device is unregistering, the 'dev->real_num_tx_queues' goes to
zero and the 'while (unlikely(hash >= qcount))' loop inside the
'skb_tx_hash' becomes infinite, locking up the core forever.
But unfortunately, checking just the carrier status is not enough to
fix the issue, because some devices may still be in unregistering
state while reporting carrier status OK.
One example of such device is a net/dummy. It sets carrier ON
on start, but it doesn't implement .ndo_stop to set the carrier off.
And it makes sense, because dummy doesn't really have a carrier.
Therefore, while this device is unregistering, it's still easy to hit
the infinite loop in the skb_tx_hash() from the OVS datapath. There
might be other drivers that do the same, but dummy by itself is
important for the OVS ecosystem, because it is frequently used as a
packet sink for tcpdump while debugging OVS deployments. And when the
issue is hit, the only way to recover is to reboot.
Fix that by also checking if the device is running. The running
state is handled by the net core during unregistering, so it covers
unregistering case better, and we don't really need to send packets
to devices that are not running anyway.
While only checking the running state might be enough, the carrier
check is preserved. The running and the carrier states seem disjoined
throughout the code and different drivers. And other core functions
like __dev_direct_xmit() check both before attempting to transmit
a packet. So, it seems safer to check both flags in OVS as well.
Fixes: 066b86787f ("net: openvswitch: fix race on port output")
Reported-by: Friedrich Weber <f.weber@proxmox.com>
Closes: https://mail.openvswitch.org/pipermail/ovs-discuss/2025-January/053423.html
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Tested-by: Friedrich Weber <f.weber@proxmox.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20250109122225.4034688-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3af60928ab9129befa65e6df0310d27300942bf ]
As pointed out in the original comment, lookup in sockmap can return a TCP
ESTABLISHED socket. Such TCP socket may have had SO_ATTACH_REUSEPORT_EBPF
set before it was ESTABLISHED. In other words, a non-NULL sk_reuseport_cb
does not imply a non-refcounted socket.
Drop sk's reference in both error paths.
unreferenced object 0xffff888101911800 (size 2048):
comm "test_progs", pid 44109, jiffies 4297131437
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
80 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 9336483b):
__kmalloc_noprof+0x3bf/0x560
__reuseport_alloc+0x1d/0x40
reuseport_alloc+0xca/0x150
reuseport_attach_prog+0x87/0x140
sk_reuseport_attach_bpf+0xc8/0x100
sk_setsockopt+0x1181/0x1990
do_sock_setsockopt+0x12b/0x160
__sys_setsockopt+0x7b/0xc0
__x64_sys_setsockopt+0x1b/0x30
do_syscall_64+0x93/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: 64d85290d7 ("bpf: Allow bpf_map_lookup_elem for SOCKMAP and SOCKHASH")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250110-reuseport-memleak-v1-1-fa1ddab0adfe@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03d120f27d050336f7e7d21879891542c4741f81 ]
CPSW ALE has 75-bit ALE entries stored across three 32-bit words.
The cpsw_ale_get_field() and cpsw_ale_set_field() functions support
ALE field entries spanning up to two words at the most.
The cpsw_ale_get_field() and cpsw_ale_set_field() functions work as
expected when ALE field spanned across word1 and word2, but fails when
ALE field spanned across word2 and word3.
For example, while reading the ALE field spanned across word2 and word3
(i.e. bits 62 to 64), the word3 data shifted to an incorrect position
due to the index becoming zero while flipping.
The same issue occurred when setting an ALE entry.
This issue has not been seen in practice but will be an issue in the future
if the driver supports accessing ALE fields spanning word2 and word3
Fix the methods to handle getting/setting fields spanning up to two words.
Fixes: b685f1a589 ("net: ethernet: ti: cpsw_ale: Fix cpsw_ale_get_field()/cpsw_ale_set_field()")
Signed-off-by: Sudheer Kumar Doredla <s-doredla@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20250108172433.311694-1-s-doredla@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9734fd7a27 ("xhci: use pm_ptr() instead of #ifdef for CONFIG_PM
conditionals") did not quite work properly in the 6.1.y branch where it was
applied to fix a build error when CONFIG_PM was set as it left the following
build errors still present:
ERROR: modpost: "xhci_suspend" [drivers/usb/host/xhci-pci.ko] undefined!
ERROR: modpost: "xhci_resume" [drivers/usb/host/xhci-pci.ko] undefined!
Fix this up by properly placing the #ifdef CONFIG_PM in the xhci-pci.c and
hcd.h files to handle this correctly.
Link: https://lore.kernel.org/r/133dbfa0-4a37-4ae0-bb95-1a35f668ec11@w6rz.net
Signed-off-by: Ron Economos <re@w6rz.net>
Link: https://lore.kernel.org/r/d0919169-ee06-4bdd-b2e3-2f776db90971@roeck-us.net
Reported-by: Guenter Roeck <linux@roeck-us.net>
[ Trimmed the partial revert down to an even smaller bit to only be what
is required to fix the build error - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 130eac4170 upstream.
A recent patch caused an unused-function warning in builds with
CONFIG_PM disabled, after the function became marked 'static':
drivers/usb/host/xhci-pci.c:91:13: error: 'xhci_msix_sync_irqs' defined but not used [-Werror=unused-function]
91 | static void xhci_msix_sync_irqs(struct xhci_hcd *xhci)
| ^~~~~~~~~~~~~~~~~~~
This could be solved by adding another #ifdef, but as there is
a trend towards removing CONFIG_PM checks in favor of helper
macros, do the same conversion here and use pm_ptr() to get
either a function pointer or NULL but avoid the warning.
As the hidden functions reference some other symbols, make
sure those are visible at compile time, at the minimal cost of
a few extra bytes for 'struct usb_device'.
Fixes: 9abe15d55d ("xhci: Move xhci MSI sync function to to xhci-pci")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230328131114.1296430-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2a86524839 ]
adv7511 probe may need to be attempted multiple times before no
-EPROBE_DEFER is returned. Currently, every such probe results in
an error message:
[ 4.534229] adv7511 1-003d: failed to find dsi host
[ 4.580288] adv7511 1-003d: failed to find dsi host
This is misleading, as there is no error and probe deferral is normal
behavior. Fix this by using dev_err_probe that will suppress
-EPROBE_DEFER errors. While at it, we touch all dev_err in the probe
path. This makes the code more concise and included the error code
everywhere to aid user in debugging.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026125246.3188260-1-a.fatoum@pengutronix.de
Stable-dep-of: 81adbd3ff21c ("drm: adv7511: Fix use-after-free in adv7533_attach_dsi()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f05e20b989ac33c9c0f8c2028ec0a566493548f ]
A missing or empty dma-ranges in a DT node implies a 1:1 mapping for dma
translations. In this specific case, the current behaviour is to zero out
the entire specifier so that the translation could be carried on as an
offset from zero. This includes address specifier that has flags (e.g.
PCI ranges).
Once the flags portion has been zeroed, the translation chain is broken
since the mapping functions will check the upcoming address specifier
against mismatching flags, always failing the 1:1 mapping and its entire
purpose of always succeeding.
Set to zero only the address portion while passing the flags through.
Fixes: dbbdee9473 ("of/address: Merge all of the bus translation code")
Cc: stable@vger.kernel.org
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Tested-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/e51ae57874e58a9b349c35e2e877425ebc075d7a.1732441813.git.andrea.porta@suse.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88696db08b7efa3b6bb722014ea7429e78f6be32 ]
It is more useful to know how many flags cells a bus has rather than
whether a bus has flags or not as ultimately the number of cells is the
information used. Replace 'has_flags' boolean with 'flag_cells' count.
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20231026135358.3564307-2-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Stable-dep-of: 7f05e20b989a ("of: address: Preserve the flags portion on 1:1 dma-ranges mapping")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3eb030c60835668997d5763b1a0c7938faf169f6 ]
The recently added of_bus_default_flags_translate() performs the exact
same operation as of_bus_pci_translate() and of_bus_isa_translate().
Avoid duplicated code replacing both of_bus_pci_translate() and
of_bus_isa_translate() with of_bus_default_flags_translate().
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20231017110221.189299-3-herve.codina@bootlin.com
Signed-off-by: Rob Herring <robh@kernel.org>
Stable-dep-of: 7f05e20b989a ("of: address: Preserve the flags portion on 1:1 dma-ranges mapping")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42604f8eb7ba04b589375049cc76282dad4677d2 ]
With the recent addition of of_pci_prop_ranges() in commit 407d1a5192
("PCI: Create device tree node for bridge"), the ranges property can
have a 3 cells child address, a 3 cells parent address and a 2 cells
child size.
A range item property for a PCI device is filled as follow:
<BAR_nbr> 0 0 <phys.hi> <phys.mid> <phys.low> <BAR_sizeh> <BAR_sizel>
<-- Child --> <-- Parent (PCI definition) --> <- BAR size (64bit) -->
This allow to translate BAR addresses from the DT. For instance:
pci@0,0 {
#address-cells = <0x03>;
#size-cells = <0x02>;
device_type = "pci";
compatible = "pci11ab,100", "pciclass,060400", "pciclass,0604";
ranges = <0x82000000 0x00 0xe8000000
0x82000000 0x00 0xe8000000
0x00 0x4400000>;
...
dev@0,0 {
#address-cells = <0x03>;
#size-cells = <0x02>;
compatible = "pci1055,9660", "pciclass,020000", "pciclass,0200";
/* Translations for BAR0 to BAR5 */
ranges = <0x00 0x00 0x00 0x82010000 0x00 0xe8000000 0x00 0x2000000
0x01 0x00 0x00 0x82010000 0x00 0xea000000 0x00 0x1000000
0x02 0x00 0x00 0x82010000 0x00 0xeb000000 0x00 0x800000
0x03 0x00 0x00 0x82010000 0x00 0xeb800000 0x00 0x800000
0x04 0x00 0x00 0x82010000 0x00 0xec000000 0x00 0x20000
0x05 0x00 0x00 0x82010000 0x00 0xec020000 0x00 0x2000>;
...
pci-ep-bus@0 {
#address-cells = <0x01>;
#size-cells = <0x01>;
compatible = "simple-bus";
/* Translate 0xe2000000 to BAR0 and 0xe0000000 to BAR1 */
ranges = <0xe2000000 0x00 0x00 0x00 0x2000000
0xe0000000 0x01 0x00 0x00 0x1000000>;
...
};
};
};
During the translation process, the "default-flags" map() function is
used to select the matching item in the ranges table and determine the
address offset from this matching item.
This map() function simply calls of_read_number() and when address-size
is greater than 2, the map() function skips the extra high address part
(ie part over 64bit). This lead to a wrong matching item and a wrong
offset computation.
Also during the translation itself, the extra high part related to the
parent address is not present in the translated address.
Fix the "default-flags" map() and translate() in order to take into
account the child extra high address part in map() and the parent extra
high address part in translate() and so having a correct address
translation for ranges patterns such as the one given in the example
above.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20231017110221.189299-2-herve.codina@bootlin.com
Signed-off-by: Rob Herring <robh@kernel.org>
Stable-dep-of: 7f05e20b989a ("of: address: Preserve the flags portion on 1:1 dma-ranges mapping")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d5089c426 ]
There's a few custom bus bindings (e.g. fsl,qoriq-mc) which use a
3 cell format with custom flags in the high cell. We can match these
buses as a fallback if we didn't match on PCI bus which is the only
standard bus binding with 3 address cells.
Link: https://lore.kernel.org/r/20230328-dt-address-helpers-v1-3-e2456c3e77ab@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Stable-dep-of: 7f05e20b989a ("of: address: Preserve the flags portion on 1:1 dma-ranges mapping")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d32dadb11 ]
While there are tests for "dma-ranges" helpers, "ranges" is missing any
tests. It's the same underlying code, but for completeness add a test
for "ranges" parsing iterators. This is in preparation to add some
additional "ranges" helpers.
Link: https://lore.kernel.org/r/20230328-dt-address-helpers-v1-1-e2456c3e77ab@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Stable-dep-of: 7f05e20b989a ("of: address: Preserve the flags portion on 1:1 dma-ranges mapping")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit c9a40292a44e78f71258b8522655bffaf5753bdb upstream.
io_eventfd_do_signal() is invoked from an RCU callback, but when
dropping the reference to the io_ev_fd, it calls io_eventfd_free()
directly if the refcount drops to zero. This isn't correct, as any
potential freeing of the io_ev_fd should be deferred another RCU grace
period.
Just call io_eventfd_put() rather than open-code the dec-and-test and
free, which will correctly defer it another RCU grace period.
Fixes: 21a091b970 ("io_uring: signal registered eventfd to process deferred task work")
Reported-by: Jann Horn <jannh@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
