Commit Graph

25 Commits

Author SHA1 Message Date
Tao Huang
dc6b994588 Merge tag 'lsk-v4.4-17.08-android' of git://git.linaro.org/kernel/linux-linaro-stable.git
LSK 17.08 v4.4-android

* tag 'lsk-v4.4-17.08-android': (451 commits)
  Linux 4.4.83
  pinctrl: samsung: Remove bogus irq_[un]mask from resource management
  pinctrl: sunxi: add a missing function of A10/A20 pinctrl driver
  pnfs/blocklayout: require 64-bit sector_t
  iio: adc: vf610_adc: Fix VALT selection value for REFSEL bits
  usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume
  usb: quirks: Add no-lpm quirk for Moshi USB to Ethernet Adapter
  usb: core: unlink urbs from the tail of the endpoint's urb_list
  USB: Check for dropped connection before switching to full speed
  uag: Add US_FL_IGNORE_RESIDUE for Initio Corporation INIC-3069
  iio: light: tsl2563: use correct event code
  iio: accel: bmc150: Always restore device to normal mode after suspend-resume
  staging:iio:resolver:ad2s1210 fix negative IIO_ANGL_VEL read
  USB: hcd: Mark secondary HCD as dead if the primary one died
  usb: musb: fix tx fifo flush handling again
  USB: serial: pl2303: add new ATEN device id
  USB: serial: cp210x: add support for Qivicon USB ZigBee dongle
  USB: serial: option: add D-Link DWM-222 device ID
  nfs/flexfiles: fix leak of nfs4_ff_ds_version arrays
  fuse: initialize the flock flag in fuse_file on allocation
  ...
2017-09-01 18:56:00 +08:00
Gerd Hoffmann
c9e4ee4457 drm/virtio: fix framebuffer sparse warning
[ Upstream commit 71d3f6ef7f ]

virtio uses normal ram as backing storage for the framebuffer, so we
should assign the address to new screen_buffer (added by commit
17a7b0b4d9) instead of screen_base.

Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-11 09:08:58 -07:00
Huang, Tao
6ee6d6d68b Merge tag 'lsk-v4.4-17.07-android' of git://git.linaro.org/kernel/linux-linaro-stable.git
LSK 17.07 v4.4-android

* tag 'lsk-v4.4-17.07-android': (402 commits)
  dt/vendor-prefixes: remove redundant vendor
  Linux 4.4.77
  saa7134: fix warm Medion 7134 EEPROM read
  x86/mm/pat: Don't report PAT on CPUs that don't support it
  ext4: check return value of kstrtoull correctly in reserved_clusters_store
  staging: comedi: fix clean-up of comedi_class in comedi_init()
  staging: vt6556: vnt_start Fix missing call to vnt_key_init_table.
  tcp: fix tcp_mark_head_lost to check skb len before fragmenting
  md: fix super_offset endianness in super_1_rdev_size_change
  md: fix incorrect use of lexx_to_cpu in does_sb_need_changing
  perf tools: Use readdir() instead of deprecated readdir_r() again
  perf tests: Remove wrong semicolon in while loop in CQM test
  perf trace: Do not process PERF_RECORD_LOST twice
  perf dwarf: Guard !x86_64 definitions under #ifdef else clause
  perf pmu: Fix misleadingly indented assignment (whitespace)
  perf annotate browser: Fix behaviour of Shift-Tab with nothing focussed
  perf tools: Remove duplicate const qualifier
  perf script: Use readdir() instead of deprecated readdir_r()
  perf thread_map: Use readdir() instead of deprecated readdir_r()
  perf tools: Use readdir() instead of deprecated readdir_r()
  ...

Conflicts:
	Makefile
	drivers/Kconfig
	drivers/Makefile
	drivers/usb/dwc3/gadget.c

Change-Id: Ib4aae2e34ebbf0d7953c748a33f673acb3e744fc
2017-07-26 19:32:04 +08:00
Gerd Hoffmann
a080ec466c drm/virtio: don't leak bo on drm_gem_object_init failure
commit 385aee965b upstream.

Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170406155941.458-1-kraxel@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-15 11:57:45 +02:00
Ville Syrjälä
a91606afb1 UPSTREAM: drm: Pass 'name' to drm_encoder_init()
Done with coccinelle for the most part. However, it thinks '...' is
part of the semantic patch, so I put an 'int DOTDOTDOT' placeholder
in its place and got rid of it with sed afterwards.

@@
identifier dev, encoder, funcs;
@@
 int drm_encoder_init(struct drm_device *dev,
                      struct drm_encoder *encoder,
                      const struct drm_encoder_funcs *funcs,
                      int encoder_type
+                     ,const char *name, int DOTDOTDOT
                      )
{ ... }

@@
identifier dev, encoder, funcs;
@@
 int drm_encoder_init(struct drm_device *dev,
                      struct drm_encoder *encoder,
                      const struct drm_encoder_funcs *funcs,
                      int encoder_type
+                     ,const char *name, int DOTDOTDOT
                      );

@@
expression E1, E2, E3, E4;
@@
 drm_encoder_init(E1, E2, E3, E4
+                 ,NULL
                  )

v2: Add ', or NULL...' to @name kernel doc (Jani)
    Annotate the function with __printf() attribute (Jani)

Change-Id: Id28ae2a6848fe1bd46905287b68f5d2c61d70039
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449670818-2966-1-git-send-email-ville.syrjala@linux.intel.com
(cherry picked from commit 13a3d91f17)
2016-03-17 09:42:01 +08:00
Ville Syrjälä
89df2e6a60 UPSTREAM: drm: Pass 'name' to drm_universal_plane_init()
Done with coccinelle for the most part. It choked on
msm/mdp/mdp5/mdp5_plane.c like so:
"BAD:!!!!!  enum drm_plane_type type;"
No idea how to deal with that, so I just fixed that up
by hand.

Also it thinks '...' is part of the semantic patch, so I put an
'int DOTDOTDOT' placeholder in its place and got rid of it with
sed afterwards.

I didn't convert drm_plane_init() since passing the varargs through
would mean either cpp macros or va_list, and I figured we don't
care about these legacy functions enough to warrant the extra pain.

@@
typedef uint32_t;
identifier dev, plane, possible_crtcs, funcs, formats, format_count, type;
@@
 int drm_universal_plane_init(struct drm_device *dev,
                              struct drm_plane *plane,
                              unsigned long possible_crtcs,
                              const struct drm_plane_funcs *funcs,
                              const uint32_t *formats,
                              unsigned int format_count,
                              enum drm_plane_type type
+                             ,const char *name, int DOTDOTDOT
                              )
{ ... }

@@
identifier dev, plane, possible_crtcs, funcs, formats, format_count, type;
@@
 int drm_universal_plane_init(struct drm_device *dev,
                              struct drm_plane *plane,
                              unsigned long possible_crtcs,
                              const struct drm_plane_funcs *funcs,
                              const uint32_t *formats,
                              unsigned int format_count,
                              enum drm_plane_type type
+                             ,const char *name, int DOTDOTDOT
                              );

@@
expression E1, E2, E3, E4, E5, E6, E7;
@@
 drm_universal_plane_init(E1, E2, E3, E4, E5, E6, E7
+                         ,NULL
                          )

v2: Split crtc and plane changes apart
    Pass NUL for no-name instead of ""
    Leave drm_plane_init() alone
v3: Add ', or NULL...' to @name kernel doc (Jani)
    Annotate the function with __printf() attribute (Jani)

Change-Id: I65fa347937ec17d21ac3fa28ec9c58c3ce97d496
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449670795-2853-1-git-send-email-ville.syrjala@linux.intel.com
(cherry picked from commit b0b3b79511)
2016-03-17 09:42:01 +08:00
Ville Syrjälä
d8bb13d947 UPSTREAM: drm: Pass 'name' to drm_crtc_init_with_planes()
Done with coccinelle for the most part. However, it thinks '...' is
part of the semantic patch, so I put an 'int DOTDOTDOT' placeholder
in its place and got rid of it with sed afterwards.

I didn't convert drm_crtc_init() since passing the varargs through
would mean either cpp macros or va_list, and I figured we don't
care about these legacy functions enough to warrant the extra pain.

@@
identifier dev, crtc, primary, cursor, funcs;
@@
 int drm_crtc_init_with_planes(struct drm_device *dev,
                               struct drm_crtc *crtc,
                               struct drm_plane *primary, struct drm_plane *cursor,
                               const struct drm_crtc_funcs *funcs
+                              ,const char *name, int DOTDOTDOT
                               )
{ ... }

@@
identifier dev, crtc, primary, cursor, funcs;
@@
 int drm_crtc_init_with_planes(struct drm_device *dev,
                               struct drm_crtc *crtc,
                               struct drm_plane *primary, struct drm_plane *cursor,
                               const struct drm_crtc_funcs *funcs
+                              ,const char *name, int DOTDOTDOT
                               );

@@
expression E1, E2, E3, E4, E5;
@@
 drm_crtc_init_with_planes(E1, E2, E3, E4, E5
+                          ,NULL
                           )

v2: Split crtc and plane changes apart
    Pass NULL for no-name instead of ""
    Leave drm_crtc_init() alone
v3: Add ', or NULL...' to @name kernel doc (Jani)
    Annotate the function with __printf() attribute (Jani)

Link: http://patchwork.freedesktop.org/patch/msgid/1449670771-2751-1-git-send-email-ville.syrjala@linux.intel.com
(cherry picked from commit f98828769c)

Change-Id: I8eb2a67b3a01bd0cb49e552f05a5ee5c6ac99d40
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
2016-03-17 09:42:01 +08:00
Marc-André Lureau
d6d38d9d79 virtio-gpu: use no-merge for fill-modes
Avoid the sticky preferred mode bit by using the no-merge version of the
function (this allows gnome-shell to resize to lower resolutions than
the default resolution)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-12-01 10:33:35 +10:00
Linus Torvalds
3e82806b97 Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
 "I Was Almost Tempted To Capitalise Every Word, but then I decided I
  couldn't read it myself!

  I've also got one pull request for the sti driver outstanding.  It
  relied on a commit in Greg's tree and I didn't find out in time, that
  commit is in your tree now so I might send that along once this is
  merged.

  I also had the accidental misfortune to have access to a Skylake on my
  desk for a few days, and I've had to encourage Intel to try harder,
  which seems to be happening now.

  Here is the main drm-next pull request for 4.4.

  Highlights:

  New driver:
        vc4 driver for the Rasberry Pi VPU.
        (From Eric Anholt at Broadcom.)

  Core:
        Atomic fbdev support
        Atomic helpers for runtime pm
        dp/aux i2c STATUS_UPDATE handling
        struct_mutex usage cleanups.
        Generic of probing support.

  Documentation:
        Kerneldoc for VGA switcheroo code.
        Rename to gpu instead of drm to reflect scope.

  i915:
        Skylake GuC firmware fixes
        HPD A support
        VBT backlight fallbacks
        Fastboot by default for some systems
        FBC work
        BXT/SKL workarounds
        Skylake deeper sleep state fixes

  amdgpu:
        Enable GPU scheduler by default
        New atombios opcodes
        GPUVM debugging options
        Stoney support.
        Fencing cleanups.

  radeon:
        More efficient CS checking

  nouveau:
        gk20a instance memory handling improvements.
        Improved PGOB detection and GK107 support
        Kepler GDDR5 PLL statbility improvement
        G8x/GT2xx reclock improvements
        new userspace API compatiblity fixes.

  virtio-gpu:
        Add 3D support - qemu 2.5 has it merged for it's gtk backend.

  msm:
        Initial msm88896 (snapdragon 8200)

  exynos:
        HDMI cleanups
        Enable mixer driver byt default
        Add DECON-TV support

  vmwgfx:
        Move to using memremap + fixes.

  rcar-du:
        Add support for R8A7793/4 DU

  armada:
        Remove support for non-component mode
        Improved plane handling
        Power savings while in DPMS off.

  tda998x:
        Remove unused slave encoder support
        Use more HDMI helpers
        Fix EDID read handling

  dwhdmi:
        Interlace video mode support for ipu-v3/dw_hdmi
        Hotplug state fixes
        Audio driver integration

  imx:
        More color formats support.

  tegra:
        Minor fixes/improvements"

[ Merge fixup: remove unused variable 'dev' that had all uses removed in
  commit 4e270f0880: "drm/gem: Drop struct_mutex requirement from
  drm_gem_mmap_obj" ]

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (764 commits)
  drm/vmwgfx: Relax irq locking somewhat
  drm/vmwgfx: Properly flush cursor updates and page-flips
  drm/i915/skl: disable display side power well support for now
  drm/i915: Extend DSL readout fix to BDW and SKL.
  drm/i915: Do graphics device reset under forcewake
  drm/i915: Skip fence installation for objects with rotated views (v4)
  vga_switcheroo: Drop client power state VGA_SWITCHEROO_INIT
  drm/amdgpu: group together common fence implementation
  drm/amdgpu: remove AMDGPU_FENCE_OWNER_MOVE
  drm/amdgpu: remove now unused fence functions
  drm/amdgpu: fix fence fallback check
  drm/amdgpu: fix stoping the scheduler timeout
  drm/amdgpu: cleanup on error in amdgpu_cs_ioctl()
  drm/i915: Fix locking around GuC firmware load
  drm/amdgpu: update Fiji's Golden setting
  drm/amdgpu: update Fiji's rev id
  drm/amdgpu: extract common code in vi_common_early_init
  drm/amd/scheduler: don't oops on failure to load
  drm/amdgpu: don't oops on failure to load (v2)
  drm/amdgpu: don't VT switch on suspend
  ...
2015-11-10 09:33:06 -08:00
Gerd Hoffmann
d24796a4a1 virtio-gpu: add page flip support
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-10-16 10:44:03 +02:00
Dave Airlie
f3380a3015 virtio-gpu: mark as a render gpu
Also add DRM_RENDER_ALLOW to the ioctls.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-10-16 10:44:03 +02:00
Dave Airlie
11a8f2805d virtio-gpu: add basic prime support
This is enough to enable DRI3.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-10-16 10:44:02 +02:00
Gerd Hoffmann
62fb7a5e10 virtio-gpu: add 3d/virgl support
Add the bits needed for opengl rendering support: query
capabilities, new virtio commands, drm ioctls.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-10-16 10:44:02 +02:00
Dave Airlie
7552ed8a1a virtio-gpu: don't free things on ttm_bo_init failure
ttm_bo_init will call the destroy callback which will do all
this, this was causing a double free.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-10-16 10:44:01 +02:00
Gerd Hoffmann
6d41533433 virtio-gpu: wait for cursor updates finish
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-10-16 10:44:00 +02:00
Gerd Hoffmann
ec2f0577c7 virtio-gpu: add & use virtio_gpu_queue_fenced_ctrl_buffer
Add helper function to handle the submission of fenced control requests.
Make sure we initialize the fence while holding the virtqueue lock, so
requests can't be reordered.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-10-16 10:44:00 +02:00
Gerd Hoffmann
9c73f47826 virtio-gpu: add virtio_gpu_queue_ctrl_buffer_locked
Add virtio_gpu_queue_ctrl_buffer_locked function, which does the same as
virtio_gpu_queue_ctrl_buffer but does not take the virtqueue lock.  The
caller must hold the lock instead.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-10-16 10:43:59 +02:00
Arnd Bergmann
d549f545e6 drm/virtio: use %llu format string form atomic64_t
The virtgpu driver prints the last_seq variable using the %ld or
%lu format string, which does not work correctly on all architectures
and causes this compiler warning on ARM:

drivers/gpu/drm/virtio/virtgpu_fence.c: In function 'virtio_timeline_value_str':
drivers/gpu/drm/virtio/virtgpu_fence.c:64:22: warning: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'long long int' [-Wformat=]
  snprintf(str, size, "%lu", atomic64_read(&fence->drv->last_seq));
                      ^
drivers/gpu/drm/virtio/virtgpu_debugfs.c: In function 'virtio_gpu_debugfs_irq_info':
drivers/gpu/drm/virtio/virtgpu_debugfs.c:37:16: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'long long int' [-Wformat=]
  seq_printf(m, "fence %ld %lld\n",
                ^

In order to avoid the warnings, this changes the format strings to %llu
and adds a cast to u64, which makes it work the same way everywhere.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-10-16 11:36:36 +10:00
Archit Taneja
0843010bbd drm/virtio: Use new drm_fb_helper functions
Use the newly created wrapper drm_fb_helper functions instead of calling
core fbdev functions directly. They also simplify the fb_info creation.

v3:
- Don't touch remove_conflicting_framebuffers

v2:
- add missing header for virtgpu_fb.c

Cc: David Airlie <airlied@linux.ie>
Cc: Gerd Hoffmann <kraxel@redhat.com>

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-06 14:13:07 +02:00
Dave Airlie
d5084f1711 virtio-gpu: add locking for vbuf pool
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-16 11:22:41 +02:00
Dave Airlie
441012aff6 drm/virtgpu: initialise fbdev after getting initial display info
This should avoid issues with the fbdev path trying to render
before we've gotten the display info.

Signed-off-by: Dave Airlie <airlied@redhat.com>

[ kraxel: wait for display-info reply ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-16 11:22:40 +02:00
Gerd Hoffmann
50cb941a26 Add virtio-vga bits. 2015-06-16 11:22:40 +02:00
Dan Carpenter
3f05eb4e3f drm/virtio: remove some dead code
The goto is correct, and we never reach the return statement so just
delete the dead code.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-06-11 13:16:35 +10:00
Dan Carpenter
2b7edcad69 drm/virtio: checking for NULL instead of IS_ERR
virtio_gpu_alloc_object() returns an error pointer, it never returns
NULL.

Fixes: dc5698e80c ('Add virtio gpu driver.')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-06-11 13:16:29 +10:00
Dave Airlie
dc5698e80c Add virtio gpu driver.
This patch adds a kms driver for the virtio gpu.  The xorg modesetting
driver can handle the device just fine, the framebuffer for fbcon is
there too.

Qemu patches for the host side are under review currently.

The pci version of the device comes in two variants: with and without
vga compatibility.  The former has a extra memory bar for the vga
framebuffer, the later is a pure virtio device.  The only concern for
this driver is that in the virtio-vga case we have to kick out the
firmware framebuffer.

Initial revision has only 2d support, 3d (virgl) support requires
some more work on the qemu side and will be added later.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-03 14:17:38 +02:00