[ Upstream commit 242d3a49a2 ]
For each netns (except init_net), we initialize its null entry
in 3 places:
1) The template itself, as we use kmemdup()
2) Code around dst_init_metrics() in ip6_route_net_init()
3) ip6_route_dev_notify(), which is supposed to initialize it after
loopback registers
Unfortunately the last one still happens in a wrong order because
we expect to initialize net->ipv6.ip6_null_entry->rt6i_idev to
net->loopback_dev's idev, thus we have to do that after we add
idev to loopback. However, this notifier has priority == 0 same as
ipv6_dev_notf, and ipv6_dev_notf is registered after
ip6_route_dev_notifier so it is called actually after
ip6_route_dev_notifier. This is similar to commit 2f460933f5
("ipv6: initialize route null entry in addrconf_init()") which
fixes init_net.
Fix it by picking a smaller priority for ip6_route_dev_notifier.
Also, we have to release the refcnt accordingly when unregistering
loopback_dev because device exit functions are called before subsys
exit functions.
Acked-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2f460933f5 ]
Andrey reported a crash on init_net.ipv6.ip6_null_entry->rt6i_idev
since it is always NULL.
This is clearly wrong, we have code to initialize it to loopback_dev,
unfortunately the order is still not correct.
loopback_dev is registered very early during boot, we lose a chance
to re-initialize it in notifier. addrconf_init() is called after
ip6_route_init(), which means we have no chance to correct it.
Fix it by moving this initialization explicitly after
ipv6_add_dev(init_net.loopback_dev) in addrconf_init().
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a89b94b533 upstream.
We're currently emulating the vbus and id interrupts in the OTGSC
read API, but we also need to make sure that if we're handling
the events with extcon that we don't enable the interrupts for
those events in the hardware. Therefore, properly emulate this
register if we're using extcon, but don't enable the interrupts.
This allows me to get my cable connect/disconnect working
properly without getting spurious interrupts on my device that
uses an extcon for these two events.
Acked-by: Peter Chen <peter.chen@nxp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Ivan T. Ivanov" <iivanov.xz@gmail.com>
Fixes: 3ecb3e09b0 ("usb: chipidea: Use extcon framework for VBUS and ID detect")
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the atomic API, it is possible that a single commit affects
multiple crtcs. If the user requests an event with that commit, one
event will be sent for each CRTC, but it is not possible to distinguish
which crtc an event is for in user space. To solve this, the reserved
field in struct drm_vblank_event is repurposed to include the crtc_id
which the event is for.
The DRM_CAP_CRTC_IN_VBLANK_EVENT is added to allow userspace to query if
the crtc field will be set properly.
[daniels: Rebased, using Maarten's forward-port.]
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Cc: Maarten Lankhorst <maarten.lankhorst@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
(am from https://patchwork.kernel.org/patch/9662099/)
Change-Id: Ibe6949782e5df5363d4eaa3e98b3ff413239cf26
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
This function registers a notifier to dmc devfreq, devfreq thread will
lock the mutex of vop when scaling frequency, so vop_crtc will not be
disabled when it is waiting for line flag.
Change-Id: I886e5dc5d36a0f14f35662cec3423a2c5550a7a6
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
When undefine "CONFIG_ROCKCHIP_SIP", define an empty sip function
to avoid make kernel failure.
Change-Id: Id6bcf1cec1c11f09511852e015631d14279ca8bc
Signed-off-by: Tang Yun ping <typ@rock-chips.com>
commit fddcca5107 upstream.
When map_word gets too large, we use a lot of kernel stack, and for
MTD_MAP_BANK_WIDTH_32, this means we use more than the recommended
1024 bytes in a number of functions:
drivers/mtd/chips/cfi_cmdset_0020.c: In function 'cfi_staa_write_buffers':
drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1336 bytes is larger than 1024 bytes [-Wframe-larger-than=]
drivers/mtd/chips/cfi_cmdset_0020.c: In function 'cfi_staa_erase_varsize':
drivers/mtd/chips/cfi_cmdset_0020.c:972:1: warning: the frame size of 1208 bytes is larger than 1024 bytes [-Wframe-larger-than=]
drivers/mtd/chips/cfi_cmdset_0001.c: In function 'do_write_buffer':
drivers/mtd/chips/cfi_cmdset_0001.c:1835:1: warning: the frame size of 1240 bytes is larger than 1024 bytes [-Wframe-larger-than=]
This can be avoided if all operations on the map word are done
indirectly and the stack gets reused between the calls. We can
mostly achieve this by selecting MTD_COMPLEX_MAPPINGS whenever
MTD_MAP_BANK_WIDTH_32 is set, but for the case that no other
bank width is enabled, we also need to use a non-constant
map_bankwidth() to convince the compiler to use less stack.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[Brian: this patch mostly achieves its goal by forcing
MTD_COMPLEX_MAPPINGS (and the accompanying indirection) for 256-bit
mappings; the rest of the change is mostly a wash, though it helps
reduce stack size slightly. If we really care about supporting
256-bit mappings though, we should consider rewriting some of this
code to avoid keeping and assigning so many 256-bit objects on the
stack.]
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* linux-linaro-lsk-v4.4-android: (521 commits)
Linux 4.4.66
ftrace/x86: Fix triple fault with graph tracing and suspend-to-ram
ARCv2: save r30 on kernel entry as gcc uses it for code-gen
nfsd: check for oversized NFSv2/v3 arguments
Input: i8042 - add Clevo P650RS to the i8042 reset list
p9_client_readdir() fix
MIPS: Avoid BUG warning in arch_check_elf
MIPS: KGDB: Use kernel context for sleeping threads
ALSA: seq: Don't break snd_use_lock_sync() loop by timeout
ALSA: firewire-lib: fix inappropriate assignment between signed/unsigned type
ipv6: check raw payload size correctly in ioctl
ipv6: check skb->protocol before lookup for nexthop
macvlan: Fix device ref leak when purging bc_queue
ip6mr: fix notification device destruction
netpoll: Check for skb->queue_mapping
net: ipv6: RTF_PCPU should not be settable from userspace
dp83640: don't recieve time stamps twice
tcp: clear saved_syn in tcp_disconnect()
sctp: listen on the sock only when it's state is listening or closed
net: ipv4: fix multipath RTM_GETROUTE behavior when iif is given
...
Conflicts:
drivers/usb/dwc3/gadget.c
include/linux/usb/quirks.h
Change-Id: I490f766b9a530b10da3107e20709538e4536a99d
This function registers a notifier to dmc devfreq, it will lock the mutex
of pmu when scaling frequency, so that pd driver and dmc driver will not
assess register PMU_BUS_IDLE_REQ at the same time.
Change-Id: I0ba96599d9050d11924d032146e6b4d415629614
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
This adds the necessary data for handling dmcfreq on the rk3368.
Change-Id: Ie202cbaa3b27e52b22a5efc57c6e108fbd03a20a
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
[ Upstream commit 557c44be91 ]
Andrey reported a fault in the IPv6 route code:
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Modules linked in:
CPU: 1 PID: 4035 Comm: a.out Not tainted 4.11.0-rc7+ #250
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
task: ffff880069809600 task.stack: ffff880062dc8000
RIP: 0010:ip6_rt_cache_alloc+0xa6/0x560 net/ipv6/route.c:975
RSP: 0018:ffff880062dced30 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: ffff8800670561c0 RCX: 0000000000000006
RDX: 0000000000000003 RSI: ffff880062dcfb28 RDI: 0000000000000018
RBP: ffff880062dced68 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff880062dcfb28 R14: dffffc0000000000 R15: 0000000000000000
FS: 00007feebe37e7c0(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000205a0fe4 CR3: 000000006b5c9000 CR4: 00000000000006e0
Call Trace:
ip6_pol_route+0x1512/0x1f20 net/ipv6/route.c:1128
ip6_pol_route_output+0x4c/0x60 net/ipv6/route.c:1212
...
Andrey's syzkaller program passes rtmsg.rtmsg_flags with the RTF_PCPU bit
set. Flags passed to the kernel are blindly copied to the allocated
rt6_info by ip6_route_info_create making a newly inserted route appear
as though it is a per-cpu route. ip6_rt_cache_alloc sees the flag set
and expects rt->dst.from to be set - which it is not since it is not
really a per-cpu copy. The subsequent call to __ip6_dst_alloc then
generates the fault.
Fix by checking for the flag and failing with EINVAL.
Fixes: d52d3997f8 ("ipv6: Create percpu rt6_info")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function is_rockchip isn't used any more now that phy reset
operation is performed based on detected phy type.
Change-Id: I58e7a222bc1e1578f0d5d2fcd884b17171fb9601
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
This is needed for AVB integration work.
Bug: 31796270
Test: Manually tested (other arch).
Change-Id: I32fd37c1578c6414e3e6ff277d16ad94df7886b8
Signed-off-by: David Zeuthen <zeuthen@google.com>
(Cherry-pick from commit f9a61eb4e2)
Original mbcache was designed to have more features than what ext?
filesystems ended up using. It supported entry being in more hashes, it
had a home-grown rwlocking of each entry, and one cache could cache
entries from multiple filesystems. This genericity also resulted in more
complex locking, larger cache entries, and generally more code
complexity.
This is reimplementation of the mbcache functionality to exactly fit the
purpose ext? filesystems use it for. Cache entries are now considerably
smaller (7 instead of 13 longs), the code is considerably smaller as
well (414 vs 913 lines of code), and IMO also simpler. The new code is
also much more lightweight.
I have measured the speed using artificial xattr-bench benchmark, which
spawns P processes, each process sets xattr for F different files, and
the value of xattr is randomly chosen from a pool of V values. Averages
of runtimes for 5 runs for various combinations of parameters are below.
The first value in each cell is old mbache, the second value is the new
mbcache.
V=10
F\P 1 2 4 8 16 32 64
10 0.158,0.157 0.208,0.196 0.500,0.277 0.798,0.400 3.258,0.584 13.807,1.047 61.339,2.803
100 0.172,0.167 0.279,0.222 0.520,0.275 0.825,0.341 2.981,0.505 12.022,1.202 44.641,2.943
1000 0.185,0.174 0.297,0.239 0.445,0.283 0.767,0.340 2.329,0.480 6.342,1.198 16.440,3.888
V=100
F\P 1 2 4 8 16 32 64
10 0.162,0.153 0.200,0.186 0.362,0.257 0.671,0.496 1.433,0.943 3.801,1.345 7.938,2.501
100 0.153,0.160 0.221,0.199 0.404,0.264 0.945,0.379 1.556,0.485 3.761,1.156 7.901,2.484
1000 0.215,0.191 0.303,0.246 0.471,0.288 0.960,0.347 1.647,0.479 3.916,1.176 8.058,3.160
V=1000
F\P 1 2 4 8 16 32 64
10 0.151,0.129 0.210,0.163 0.326,0.245 0.685,0.521 1.284,0.859 3.087,2.251 6.451,4.801
100 0.154,0.153 0.211,0.191 0.276,0.282 0.687,0.506 1.202,0.877 3.259,1.954 8.738,2.887
1000 0.145,0.179 0.202,0.222 0.449,0.319 0.899,0.333 1.577,0.524 4.221,1.240 9.782,3.579
V=10000
F\P 1 2 4 8 16 32 64
10 0.161,0.154 0.198,0.190 0.296,0.256 0.662,0.480 1.192,0.818 2.989,2.200 6.362,4.746
100 0.176,0.174 0.236,0.203 0.326,0.255 0.696,0.511 1.183,0.855 4.205,3.444 19.510,17.760
1000 0.199,0.183 0.240,0.227 1.159,1.014 2.286,2.154 6.023,6.039 ---,10.933 ---,36.620
V=100000
F\P 1 2 4 8 16 32 64
10 0.171,0.162 0.204,0.198 0.285,0.230 0.692,0.500 1.225,0.881 2.990,2.243 6.379,4.771
100 0.151,0.171 0.220,0.210 0.295,0.255 0.720,0.518 1.226,0.844 3.423,2.831 19.234,17.544
1000 0.192,0.189 0.249,0.225 1.162,1.043 2.257,2.093 5.853,4.997 ---,10.399 ---,32.198
We see that the new code is faster in pretty much all the cases and
starting from 4 processes there are significant gains with the new code
resulting in upto 20-times shorter runtimes. Also for large numbers of
cached entries all values for the old code could not be measured as the
kernel started hitting softlockups and died before the test completed.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Bug: 32461228
commit d29216842a upstream.
CAI Qian <caiqian@redhat.com> pointed out that the semantics
of shared subtrees make it possible to create an exponentially
increasing number of mounts in a mount namespace.
mkdir /tmp/1 /tmp/2
mount --make-rshared /
for i in $(seq 1 20) ; do mount --bind /tmp/1 /tmp/2 ; done
Will create create 2^20 or 1048576 mounts, which is a practical problem
as some people have managed to hit this by accident.
As such CVE-2016-6213 was assigned.
Ian Kent <raven@themaw.net> described the situation for autofs users
as follows:
> The number of mounts for direct mount maps is usually not very large because of
> the way they are implemented, large direct mount maps can have performance
> problems. There can be anywhere from a few (likely case a few hundred) to less
> than 10000, plus mounts that have been triggered and not yet expired.
>
> Indirect mounts have one autofs mount at the root plus the number of mounts that
> have been triggered and not yet expired.
>
> The number of autofs indirect map entries can range from a few to the common
> case of several thousand and in rare cases up to between 30000 and 50000. I've
> not heard of people with maps larger than 50000 entries.
>
> The larger the number of map entries the greater the possibility for a large
> number of active mounts so it's not hard to expect cases of a 1000 or somewhat
> more active mounts.
So I am setting the default number of mounts allowed per mount
namespace at 100,000. This is more than enough for any use case I
know of, but small enough to quickly stop an exponential increase
in mounts. Which should be perfect to catch misconfigurations and
malfunctioning programs.
For anyone who needs a higher limit this can be changed by writing
to the new /proc/sys/fs/mount-max sysctl.
Tested-by: CAI Qian <caiqian@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
[bwh: Backported to 4.4: adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because optee works on both kernel 3.10 and 4.4, these two branches
have different rockchip sip protocol that sip version v1 for 3.10
and sip version v2 for 4.4
Change-Id: I4f69352d2001b1c22c5617dc443510263b4c53f5
Signed-off-by: chenjh <chenjh@rock-chips.com>
commit ef0579b64e upstream.
The ahash API modifies the request's callback function in order
to clean up after itself in some corner cases (unaligned final
and missing finup).
When the request is complete ahash will restore the original
callback and everything is fine. However, when the request gets
an EBUSY on a full queue, an EINPROGRESS callback is made while
the request is still ongoing.
In this case the ahash API will incorrectly call its own callback.
This patch fixes the problem by creating a temporary request
object on the stack which is used to relay EINPROGRESS back to
the original completion function.
This patch also adds code to preserve the original flags value.
Fixes: ab6bf4e5e5 ("crypto: hash - Fix the pointer voodoo in...")
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 77f88796ce upstream.
Creation of a kthread goes through a couple interlocked stages between
the kthread itself and its creator. Once the new kthread starts
running, it initializes itself and wakes up the creator. The creator
then can further configure the kthread and then let it start doing its
job by waking it up.
In this configuration-by-creator stage, the creator is the only one
that can wake it up but the kthread is visible to userland. When
altering the kthread's attributes from userland is allowed, this is
fine; however, for cases where CPU affinity is critical,
kthread_bind() is used to first disable affinity changes from userland
and then set the affinity. This also prevents the kthread from being
migrated into non-root cgroups as that can affect the CPU affinity and
many other things.
Unfortunately, the cgroup side of protection is racy. While the
PF_NO_SETAFFINITY flag prevents further migrations, userland can win
the race before the creator sets the flag with kthread_bind() and put
the kthread in a non-root cgroup, which can lead to all sorts of
problems including incorrect CPU affinity and starvation.
This bug got triggered by userland which periodically tries to migrate
all processes in the root cpuset cgroup to a non-root one. Per-cpu
workqueue workers got caught while being created and ended up with
incorrected CPU affinity breaking concurrency management and sometimes
stalling workqueue execution.
This patch adds task->no_cgroup_migration which disallows the task to
be migrated by userland. kthreadd starts with the flag set making
every child kthread start in the root cgroup with migration
disallowed. The flag is cleared after the kthread finishes
initialization by which time PF_NO_SETAFFINITY is set if the kthread
should stay in the root cgroup.
It'd be better to wait for the initialization instead of failing but I
couldn't think of a way of implementing that without adding either a
new PF flag, or sleeping and retrying from waiting side. Even if
userland depends on changing cgroup membership of a kthread, it either
has to be synchronized with kthread_create() or periodically repeat,
so it's unlikely that this would break anything.
v2: Switch to a simpler implementation using a new task_struct bit
field suggested by Oleg.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-and-debugged-by: Chris Mason <clm@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some xHC controllers (e.g. Rockchip rk3399) integrated in
DWC3 IP, will be powered down in S3, and reinitialized after
resume.
However, if a USB3 device is plugged before system enter S3,
the device will be disconnected after resume because of xHC
lose power. And the device can't be detected again even if
we reinitialize xHC. In this case, CCS and CSC is '0' and
can't reflect the current state of the port, also the link
state stays in Rx.Detect.
So try to do warm reset on resume to reset USB3 device to
the default state, also reset a USB3 link, and re-exchange
link configuration information.
BUG=chrome-os-partner:58347
TEST=Plug an USB3 flash drive in rk3399 Kevin board Type-C
port, then set system enter S3. Wakeup system, check if USB3
device can be detected after resume.
Change-Id: I90975a48866569f2c2422a244afc618a3e427f57
Signed-off-by: William wu <wulf@rock-chips.com>
Reviewed-on: https://chromium-review.googlesource.com/412487
Commit-Ready: Guenter Roeck <groeck@chromium.org>
Tested-by: Guenter Roeck <groeck@chromium.org>
Tested-by: Inno Park <ih.yoo.park@samsung.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Meng Dongyang <daniel.meng@rock-chips.com>
The buffer have been accessed by CPU needs to be synced
for the device to see the most up-to-date.
So introduce a flag here to see if a buffer need flush cache.
Change-Id: I68457aa528d04acc6f92dfa2171d8c807ab657a6
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
The CPUFREQ_CREATE_POLICY and CPUFREQ_START had removed on 'master'
of git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git.
So the driver will be unused in the future.
Change-Id: I7e26a8050c4745d3390302babeafbbc40ff5e707
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
commit fe25deb773 upstream.
Previously, when a surface was opened using a legacy (non prime) handle,
it was verified to have been created by a client in the same master realm.
Relax this so that opening is also allowed recursively if the client
already has the surface open.
This works around a regression in svga mesa where opening of a shared
surface is used recursively to obtain surface information.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This implements:
https://tools.ietf.org/html/rfc7559
Backoff is performed according to RFC3315 section 14:
https://tools.ietf.org/html/rfc3315#section-14
We allow setting /proc/sys/net/ipv6/conf/*/router_solicitations
to a negative value meaning an unlimited number of retransmits,
and we make this the new default (inline with the RFC).
We also add a new setting:
/proc/sys/net/ipv6/conf/*/router_solicitation_max_interval
defaulting to 1 hour (per RFC recommendation).
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Acked-by: Erik Kline <ek@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit bd11f0741f in
DaveM's net-next/master, should make Linus' tree in 4.9-rc1)
Change-Id: Ia32cdc5c61481893ef8040734e014bf2229fc39e
This commit adds a new sysctl accept_ra_rt_info_min_plen that
defines the minimum acceptable prefix length of Route Information
Options. The new sysctl is intended to be used together with
accept_ra_rt_info_max_plen to configure a range of acceptable
prefix lengths. It is useful to prevent misconfigurations from
unintentionally blackholing too much of the IPv6 address space
(e.g., home routers announcing RIOs for fc00::/7, which is
incorrect).
[backport of net-next bbea124bc9]
Bug: 33333670
Test: net_test passes
Signed-off-by: Joel Scherpelz <jscherpelz@google.com>
Acked-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the eMMC 5.0 version of the spec, several EXT_CSD fields about
device lifetime are added.
- Two types of estimated indications reflected by averaged wear out of memory
- An indication reflected by average reserved blocks
Export the information through sysfs.
Signed-off-by: Jungseung Lee <js07.lee@samsung.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Andoid files frequently have spaces in them, as do cmdline strings.
Replace these spaces with '_', so tools that parse these tracepoints
don't get terribly confused.
Change-Id: I1cbbedf5c803aa6a58d9b8b7836e9125683c49d1
Signed-off-by: Mohan Srinivasan <srmohan@google.com>
(cherry picked from commit 5035d5f0933758dd515327d038e5bef7e40dbaa7)
