Shared interrupts do not go well with disabling auto enable:
1) The sharing interrupt might request it while it's still disabled and
then wait for interrupts forever.
2) The interrupt might have been requested by the driver sharing the line
before IRQ_NOAUTOEN has been set. So the driver which expects that
disabled state after calling request_irq() will not get what it wants.
Even worse, when it calls enable_irq() later, it will trigger the
unbalanced enable_irq() warning.
Reported-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: dianders@chromium.org
Cc: jeffy <jeffy.chen@rock-chips.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: tfiga@chromium.org
Link: http://lkml.kernel.org/r/20170531100212.210682135@linutronix.de
(cherry picked from commit 04c848d398)
Change-Id: I89711656f22e15697c76a4dcb9c60c8b0c8052d2
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
If an interrupt is marked NOAUTOEN then request_irq() installs the action,
but does not enable the interrupt via startup_irq(). The interrupt is
enabled via enable_irq() later from the driver. enable_irq() calls
irq_enable().
That means that for interrupts which have a irq_startup() callback this
callback is never invoked. Neither is irq_domain_activate_irq() invoked for
such interrupts.
If an interrupt depends on irq_startup() or irq_domain_activate_irq() then
the enable via irq_enable() is not enough.
Add a status flag IRQD_IRQ_STARTED_UP and use this to select the proper
mechanism in enable_irq(). Use the flag also to avoid pointless calls into
the low level functions.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: dianders@chromium.org
Cc: jeffy <jeffy.chen@rock-chips.com>
Cc: Brian Norris <briannorris@chromium.org>
Cc: tfiga@chromium.org
Link: http://lkml.kernel.org/r/20170531100212.130986205@linutronix.de
(cherry picked from commit 201d7f47f3)
Conflicts:
include/linux/irq.h
[due to missing upstream patches:
08d85f3 irqdomain: Avoid activating interrupts more than once
1a3d28a UPSTREAM: genirq: Introduce IRQD_AFFINITY_MANAGED flag
6297714 UPSTREAM: irq: Privatize irq_common_data::state_use_accessors]
Change-Id: Ie8d492c694171fa81e3df61e8561bec160ad37bb
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
[ Upstream commit 2317d5f1c3 ]
I was testing Daniel's changes with his test case, and tweaked it a
little. Instead of having the runtime equal to the deadline, I
increased the deadline ten fold.
Daniel's test case had:
attr.sched_runtime = 2 * 1000 * 1000; /* 2 ms */
attr.sched_deadline = 2 * 1000 * 1000; /* 2 ms */
attr.sched_period = 2 * 1000 * 1000 * 1000; /* 2 s */
To make it more interesting, I changed it to:
attr.sched_runtime = 2 * 1000 * 1000; /* 2 ms */
attr.sched_deadline = 20 * 1000 * 1000; /* 20 ms */
attr.sched_period = 2 * 1000 * 1000 * 1000; /* 2 s */
The results were rather surprising. The behavior that Daniel's patch
was fixing came back. The task started using much more than .1% of the
CPU. More like 20%.
Looking into this I found that it was due to the dl_entity_overflow()
constantly returning true. That's because it uses the relative period
against relative runtime vs the absolute deadline against absolute
runtime.
runtime / (deadline - t) > dl_runtime / dl_period
There's even a comment mentioning this, and saying that when relative
deadline equals relative period, that the equation is the same as using
deadline instead of period. That comment is backwards! What we really
want is:
runtime / (deadline - t) > dl_runtime / dl_deadline
We care about if the runtime can make its deadline, not its period. And
then we can say "when the deadline equals the period, the equation is
the same as using dl_period instead of dl_deadline".
After correcting this, now when the task gets enqueued, it can throttle
correctly, and Daniel's fix to the throttling of sleeping deadline
tasks works even when the runtime and deadline are not the same.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luca Abeni <luca.abeni@santannapisa.it>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Romulo Silva de Oliveira <romulo.deoliveira@ufsc.br>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tommaso Cucinotta <tommaso.cucinotta@sssup.it>
Link: http://lkml.kernel.org/r/02135a27f1ae3fe5fd032568a5a2f370e190e8d7.1488392936.git.bristot@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit df8eac8caf ]
During the activation, CBS checks if it can reuse the current task's
runtime and period. If the deadline of the task is in the past, CBS
cannot use the runtime, and so it replenishes the task. This rule
works fine for implicit deadline tasks (deadline == period), and the
CBS was designed for implicit deadline tasks. However, a task with
constrained deadline (deadine < period) might be awakened after the
deadline, but before the next period. In this case, replenishing the
task would allow it to run for runtime / deadline. As in this case
deadline < period, CBS enables a task to run for more than the
runtime / period. In a very loaded system, this can cause a domino
effect, making other tasks miss their deadlines.
To avoid this problem, in the activation of a constrained deadline
task after the deadline but before the next period, throttle the
task and set the replenishing timer to the begin of the next period,
unless it is boosted.
Reproducer:
--------------- %< ---------------
int main (int argc, char **argv)
{
int ret;
int flags = 0;
unsigned long l = 0;
struct timespec ts;
struct sched_attr attr;
memset(&attr, 0, sizeof(attr));
attr.size = sizeof(attr);
attr.sched_policy = SCHED_DEADLINE;
attr.sched_runtime = 2 * 1000 * 1000; /* 2 ms */
attr.sched_deadline = 2 * 1000 * 1000; /* 2 ms */
attr.sched_period = 2 * 1000 * 1000 * 1000; /* 2 s */
ts.tv_sec = 0;
ts.tv_nsec = 2000 * 1000; /* 2 ms */
ret = sched_setattr(0, &attr, flags);
if (ret < 0) {
perror("sched_setattr");
exit(-1);
}
for(;;) {
/* XXX: you may need to adjust the loop */
for (l = 0; l < 150000; l++);
/*
* The ideia is to go to sleep right before the deadline
* and then wake up before the next period to receive
* a new replenishment.
*/
nanosleep(&ts, NULL);
}
exit(0);
}
--------------- >% ---------------
On my box, this reproducer uses almost 50% of the CPU time, which is
obviously wrong for a task with 2/2000 reservation.
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luca Abeni <luca.abeni@santannapisa.it>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Romulo Silva de Oliveira <romulo.deoliveira@ufsc.br>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tommaso Cucinotta <tommaso.cucinotta@sssup.it>
Link: http://lkml.kernel.org/r/edf58354e01db46bf42df8d2dd32418833f68c89.1488392936.git.bristot@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5ac69d3778 ]
Currently, the replenishment timer is set to fire at the deadline
of a task. Although that works for implicit deadline tasks because the
deadline is equals to the begin of the next period, that is not correct
for constrained deadline tasks (deadline < period).
For instance:
f.c:
--------------- %< ---------------
int main (void)
{
for(;;);
}
--------------- >% ---------------
# gcc -o f f.c
# trace-cmd record -e sched:sched_switch \
-e syscalls:sys_exit_sched_setattr \
chrt -d --sched-runtime 490000000 \
--sched-deadline 500000000 \
--sched-period 1000000000 0 ./f
# trace-cmd report | grep "{pid of ./f}"
After setting parameters, the task is replenished and continue running
until being throttled:
f-11295 [003] 13322.113776: sys_exit_sched_setattr: 0x0
The task is throttled after running 492318 ms, as expected:
f-11295 [003] 13322.606094: sched_switch: f:11295 [-1] R ==> watchdog/3:32 [0]
But then, the task is replenished 500719 ms after the first
replenishment:
<idle>-0 [003] 13322.614495: sched_switch: swapper/3:0 [120] R ==> f:11295 [-1]
Running for 490277 ms:
f-11295 [003] 13323.104772: sched_switch: f:11295 [-1] R ==> swapper/3:0 [120]
Hence, in the first period, the task runs 2 * runtime, and that is a bug.
During the first replenishment, the next deadline is set one period away.
So the runtime / period starts to be respected. However, as the second
replenishment took place in the wrong instant, the next replenishment
will also be held in a wrong instant of time. Rather than occurring in
the nth period away from the first activation, it is taking place
in the (nth period - relative deadline).
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Luca Abeni <luca.abeni@santannapisa.it>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Romulo Silva de Oliveira <romulo.deoliveira@ufsc.br>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tommaso Cucinotta <tommaso.cucinotta@sssup.it>
Link: http://lkml.kernel.org/r/ac50d89887c25285b47465638354b63362f8adff.1488392936.git.bristot@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f73c52a5bc upstream.
Daniel Wagner reported a crash on the BeagleBone Black SoC.
This is a single CPU architecture, and does not have a functional
arch_send_call_function_single_ipi() implementation which can crash
the kernel if that is called.
As it only has one CPU, it shouldn't be called, but if the kernel is
compiled for SMP, the push/pull RT scheduling logic now calls it for
irq_work if the one CPU is overloaded, it can use that function to call
itself and crash the kernel.
Ideally, we should disable the SCHED_FEAT(RT_PUSH_IPI) if the system
only has a single CPU. But SCHED_FEAT is a constant if sched debugging
is turned off. Another fix can also be used, and this should also help
with normal SMP machines. That is, do not initiate the pull code if
there's only one RT overloaded CPU, and that CPU happens to be the
current CPU that is scheduling in a lower priority task.
Even on a system with many CPUs, if there's many RT tasks waiting to
run on a single CPU, and that CPU schedules in another RT task of lower
priority, it will initiate the PULL logic in case there's a higher
priority RT task on another CPU that is waiting to run. But if there is
no other CPU with waiting RT tasks, it will initiate the RT pull logic
on itself (as it still has RT tasks waiting to run). This is a wasted
effort.
Not only does this help with SMP code where the current CPU is the only
one with RT overloaded tasks, it should also solve the issue that
Daniel encountered, because it will prevent the PULL logic from
executing, as there's only one CPU on the system, and the check added
here will cause it to exit the RT pull code.
Reported-by: Daniel Wagner <wagi@monom.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-rt-users <linux-rt-users@vger.kernel.org>
Fixes: 4bdced5c9 ("sched/rt: Simplify the IPI based RT balancing logic")
Link: http://lkml.kernel.org/r/20171202130454.4cbbfe8d@vmware.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 90e406f96f upstream.
The default NR_CPUS can be very large, but actual possible nr_cpu_ids
usually is very small. For my x86 distribution, the NR_CPUS is 8192 and
nr_cpu_ids is 4. About 2 pages are wasted.
Most machines don't have so many CPUs, so define a array with NR_CPUS
just wastes memory. So let's allocate the buffer dynamically when need.
With this change, the mutext tracing_cpumask_update_lock also can be
removed now, which was used to protect mask_str.
Link: http://lkml.kernel.org/r/1512013183-19107-1-git-send-email-changbin.du@intel.com
Fixes: 36dfe9252b ("ftrace: make use of tracing_cpumask")
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 173743dd99 ]
Prior to this patch we enabled audit in audit_init(), which is too
late for PID 1 as the standard initcalls are run after the PID 1 task
is forked. This means that we never allocate an audit_context (see
audit_alloc()) for PID 1 and therefore miss a lot of audit events
generated by PID 1.
This patch enables audit as early as possible to help ensure that when
PID 1 is forked it can allocate an audit_context if required.
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 92ee46efeb ]
Fengguang Wu reported that running the rcuperf test during boot can cause
the jump_label_test() to hit a WARN_ON(). The issue is that the core jump
label code relies on kernel_text_address() to detect when it can no longer
update branches that may be contained in __init sections. The
kernel_text_address() in turn assumes that if the system_state variable is
greter than or equal to SYSTEM_RUNNING then __init sections are no longer
valid (since the assumption is that they have been freed). However, when
rcuperf is setup to run in early boot it can call kernel_power_off() which
sets the system_state to SYSTEM_POWER_OFF.
Since rcuperf initialization is invoked via a module_init(), we can make
the dependency of jump_label_test() needing to complete before rcuperf
explicit by calling it via early_initcall().
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1510609727-2238-1-git-send-email-jbaron@akamai.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c07d353380 upstream.
kallsyms_symbol_next() returns a boolean (true on success). Currently
kdb_read() tests the return value with an inequality that
unconditionally evaluates to true.
This is fixed in the obvious way and, since the conditional branch is
supposed to be unreachable, we also add a WARN_ON().
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* linux-linaro-lsk-v4.4-android: (510 commits)
Linux 4.4.103
Revert "sctp: do not peel off an assoc from one netns to another one"
xen: xenbus driver must not accept invalid transaction ids
s390/kbuild: enable modversions for symbols exported from asm
ASoC: wm_adsp: Don't overrun firmware file buffer when reading region data
btrfs: return the actual error value from from btrfs_uuid_tree_iterate
ASoC: rsnd: don't double free kctrl
netfilter: nf_tables: fix oob access
netfilter: nft_queue: use raw_smp_processor_id()
spi: SPI_FSL_DSPI should depend on HAS_DMA
staging: iio: cdc: fix improper return value
iio: light: fix improper return value
mac80211: Suppress NEW_PEER_CANDIDATE event if no room
mac80211: Remove invalid flag operations in mesh TSF synchronization
drm: Apply range restriction after color adjustment when allocation
ALSA: hda - Apply ALC269_FIXUP_NO_SHUTUP on HDA_FIXUP_ACT_PROBE
ath10k: set CTS protection VDEV param only if VDEV is up
ath10k: fix potential memory leak in ath10k_wmi_tlv_op_pull_fw_stats()
ath10k: ignore configuring the incorrect board_id
ath10k: fix incorrect txpower set by P2P_DEVICE interface
...
Conflicts:
drivers/media/v4l2-core/v4l2-ctrls.c
kernel/sched/fair.c
Change-Id: I48152b2a0ab1f9f07e1da7823119b94f9b9e1751
commit 4bdced5c9a upstream.
When a CPU lowers its priority (schedules out a high priority task for a
lower priority one), a check is made to see if any other CPU has overloaded
RT tasks (more than one). It checks the rto_mask to determine this and if so
it will request to pull one of those tasks to itself if the non running RT
task is of higher priority than the new priority of the next task to run on
the current CPU.
When we deal with large number of CPUs, the original pull logic suffered
from large lock contention on a single CPU run queue, which caused a huge
latency across all CPUs. This was caused by only having one CPU having
overloaded RT tasks and a bunch of other CPUs lowering their priority. To
solve this issue, commit:
b6366f048e ("sched/rt: Use IPI to trigger RT task push migration instead of pulling")
changed the way to request a pull. Instead of grabbing the lock of the
overloaded CPU's runqueue, it simply sent an IPI to that CPU to do the work.
Although the IPI logic worked very well in removing the large latency build
up, it still could suffer from a large number of IPIs being sent to a single
CPU. On a 80 CPU box, I measured over 200us of processing IPIs. Worse yet,
when I tested this on a 120 CPU box, with a stress test that had lots of
RT tasks scheduling on all CPUs, it actually triggered the hard lockup
detector! One CPU had so many IPIs sent to it, and due to the restart
mechanism that is triggered when the source run queue has a priority status
change, the CPU spent minutes! processing the IPIs.
Thinking about this further, I realized there's no reason for each run queue
to send its own IPI. As all CPUs with overloaded tasks must be scanned
regardless if there's one or many CPUs lowering their priority, because
there's no current way to find the CPU with the highest priority task that
can schedule to one of these CPUs, there really only needs to be one IPI
being sent around at a time.
This greatly simplifies the code!
The new approach is to have each root domain have its own irq work, as the
rto_mask is per root domain. The root domain has the following fields
attached to it:
rto_push_work - the irq work to process each CPU set in rto_mask
rto_lock - the lock to protect some of the other rto fields
rto_loop_start - an atomic that keeps contention down on rto_lock
the first CPU scheduling in a lower priority task
is the one to kick off the process.
rto_loop_next - an atomic that gets incremented for each CPU that
schedules in a lower priority task.
rto_loop - a variable protected by rto_lock that is used to
compare against rto_loop_next
rto_cpu - The cpu to send the next IPI to, also protected by
the rto_lock.
When a CPU schedules in a lower priority task and wants to make sure
overloaded CPUs know about it. It increments the rto_loop_next. Then it
atomically sets rto_loop_start with a cmpxchg. If the old value is not "0",
then it is done, as another CPU is kicking off the IPI loop. If the old
value is "0", then it will take the rto_lock to synchronize with a possible
IPI being sent around to the overloaded CPUs.
If rto_cpu is greater than or equal to nr_cpu_ids, then there's either no
IPI being sent around, or one is about to finish. Then rto_cpu is set to the
first CPU in rto_mask and an IPI is sent to that CPU. If there's no CPUs set
in rto_mask, then there's nothing to be done.
When the CPU receives the IPI, it will first try to push any RT tasks that is
queued on the CPU but can't run because a higher priority RT task is
currently running on that CPU.
Then it takes the rto_lock and looks for the next CPU in the rto_mask. If it
finds one, it simply sends an IPI to that CPU and the process continues.
If there's no more CPUs in the rto_mask, then rto_loop is compared with
rto_loop_next. If they match, everything is done and the process is over. If
they do not match, then a CPU scheduled in a lower priority task as the IPI
was being passed around, and the process needs to start again. The first CPU
in rto_mask is sent the IPI.
This change removes this duplication of work in the IPI logic, and greatly
lowers the latency caused by the IPIs. This removed the lockup happening on
the 120 CPU machine. It also simplifies the code tremendously. What else
could anyone ask for?
Thanks to Peter Zijlstra for simplifying the rto_loop_start atomic logic and
supplying me with the rto_start_trylock() and rto_start_unlock() helper
functions.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott Wood <swood@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170424114732.1aac6dc4@gandalf.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c2102e56a upstream.
The current implementation of synchronize_sched_expedited() incorrectly
assumes that resched_cpu() is unconditional, which it is not. This means
that synchronize_sched_expedited() can hang when resched_cpu()'s trylock
fails as follows (analysis by Neeraj Upadhyay):
o CPU1 is waiting for expedited wait to complete:
sync_rcu_exp_select_cpus
rdp->exp_dynticks_snap & 0x1 // returns 1 for CPU5
IPI sent to CPU5
synchronize_sched_expedited_wait
ret = swait_event_timeout(rsp->expedited_wq,
sync_rcu_preempt_exp_done(rnp_root),
jiffies_stall);
expmask = 0x20, CPU 5 in idle path (in cpuidle_enter())
o CPU5 handles IPI and fails to acquire rq lock.
Handles IPI
sync_sched_exp_handler
resched_cpu
returns while failing to try lock acquire rq->lock
need_resched is not set
o CPU5 calls rcu_idle_enter() and as need_resched is not set, goes to
idle (schedule() is not called).
o CPU 1 reports RCU stall.
Given that resched_cpu() is now used only by RCU, this commit fixes the
assumption by making resched_cpu() unconditional.
Reported-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Suggested-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0d0e57697f upstream.
The patch fixes two things at once:
1) It checks the env->allow_ptr_leaks and only prints the map address to
the log if we have the privileges to do so, otherwise it just dumps 0
as we would when kptr_restrict is enabled on %pK. Given the latter is
off by default and not every distro sets it, I don't want to rely on
this, hence the 0 by default for unprivileged.
2) Printing of ldimm64 in the verifier log is currently broken in that
we don't print the full immediate, but only the 32 bit part of the
first insn part for ldimm64. Thus, fix this up as well; it's okay to
access, since we verified all ldimm64 earlier already (including just
constants) through replace_map_fd_with_map_ptr().
Fixes: 1be7f75d16 ("bpf: enable non-root eBPF programs")
Fixes: cbd3570086 ("bpf: verifier (add ability to receive verification log)")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 4.4: s/bpf_verifier_env/verifier_env/]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Boosted RT tasks can be deboosted quickly, this makes boost usless
for RT tasks and causes lots of glitching. Use timers to prevent
de-boost too soon and wait for long enough such that next enqueue
happens after a threshold.
While this can be solved in the governor, there are following
advantages:
- The approach used is governor-independent
- Reduces boost group lock contention for frequently sleepers/wakers
- Works with schedfreq without any other schedfreq hacks.
Bug: 30210506
Change-Id: I41788b235586988be446505deb7c0529758a9898
Signed-off-by: Joel Fernandes <joelaf@google.com>
We all should be using (and improving) the schedutil governor now. Get
rid of the non-upstream governor.
Tested on Hikey.
Change-Id: Ic660756536e5da51952738c3c18b94e31f58cd57
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch adds schedtune enqueue/dequeue to RT scheduling class.
Change-Id: If416e64319d62191f3aedd675d3e9a21fe2102fb
Signed-off-by: Joel Fernandes <joelaf@google.com>
util_delta becomes not zero in eenv_before, which will affect the
calculation of grp_util in group_idle_state(). Fix it under the
new condition.
Change-Id: Ic3853bb45876a8e388afcbe4e72d25fc42b1d7b0
Signed-off-by: Ke Wang <ke.wang@spreadtrum.com>
If no energy saving for target_cpu in the calculation of energy_diff(),
backup_cpu will be set as the new dst_cpu for the next calculation. At this
point, we also need update the new trg_cpu as backup_cpu to make sure the
subsequent calculation of energy_diff() is correct.
Signed-off-by: Ke Wang <ke.wang@spreadtrum.com>
Before commit 5f8b3a757d ("sched/fair: consider task utilization in
group_norm_util()"), eenv->util_delta is used to distinguish energy
before and energy after in sched_group_energy(). After that commit,
eenv->util_delta can not do that any more.
In this commit, use trg_cpu to distinguish energy before/after in
sched_group_energy().
Before apply this commit, cap_before/cap_delta is not correct:
<idle>-0 [001] 147504.608920: sched_energy_diff: pid=7 comm=rcu_preempt
src_cpu=1 dst_cpu=3 usage_delta=7 nrg_before=250 nrg_after=250 nrg_diff=0
cap_before=0 cap_after=528 cap_delta=1056 nrg_delta=0 nrg_payoff=0
After apply this commit, cap_before/cap_delta retrun to normal:
<idle>-0 [001] 220.494011: sched_energy_diff: pid=7 comm=rcu_preempt
src_cpu=1 dst_cpu=2 usage_delta=3 nrg_before=248 nrg_after=248 nrg_diff=0
cap_before=528 cap_after=528 cap_delta=0 nrg_delta=0 nrg_payoff=0
Signed-off-by: Ke Wang <ke.wang@spreadtrum.com>
Upmigrate misfit current task upon scheduler tick with stopper.
We can kick an random (not necessarily big CPU) NOHZ idle CPU when a
CPU bound task is in need of upmigration. But it's not efficient as that
way needs following unnecessary wakeups:
1. Busy little CPU A to kick idle B
2. B runs idle balancer and enqueue migration/A
3. B goes idle
4. A runs migration/A, enqueues busy task on B.
5. B wakes up again.
This change makes active upmigration more efficiently by doing:
1. Busy little CPU A find target CPU B upon tick.
2. CPU A enqueues migration/A.
Change-Id: Ie865738054ea3296f28e6ba01710635efa7193c0
[joonwoop: The original version had logic to reserve CPU. The logic is
omitted in this version.]
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org>
Currently active_load_balance_cpu_stop is run by cpu stopper and it
pushes running tasks off the busiest CPU onto idle target CPU. But
there is no check to see whether target cpu is offline or not before
pushing the tasks. With the introduction of active migration in the
scheduler tick path (see check_for_migration()) there have been
instances of attempts to migrate tasks to offline CPUs.
Add a check as to whether the target cpu is online or not to prevent
scheduling on offline CPUs.
Change-Id: Ib8ac7f8aeabd3ca7365f3eae977075952dab4f21
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
[rameezmustafa@codeaurora.org]: Port to msm-3.18]
Signed-off-by: Syed Rameez Mustafa <rameezmustafa@codeaurora.org
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org>
Active balance currently picks one task to migrate from busy cpu to
a chosen cpu (push_cpu). This patch extends active load balance to
recognize a particular task ('push_task') that needs to be migrated to
'push_cpu'. This capability will be leveraged by HMP-aware task
placement in a subsequent patch.
Change-Id: If31320111e6cc7044e617b5c3fd6d8e0c0e16952
Signed-off-by: Srivatsa Vaddagiri <vatsa@codeaurora.org>
[rameezmustafa@codeaurora.org]: Port to msm-3.18]
Signed-off-by: Syed Rameez Mustafa <rameezmustafa@codeaurora.org>
have_sched_energy_data is defined only for CONFIG_SMP, so declare it
only with CONFIG_SMP.
Fixes warning from intel bot:
tree: https://android.googlesource.com/kernel/msm android-4.4
head: a21299785a
commit: a21299785a [5/5] sched/core: Warn
if ENERGY_AWARE is enabled but data is missing
config: i386-randconfig-x002-201743 (attached as .config)
compiler: gcc-6 (Debian 6.2.0-3) 6.2.0 20160901
reproduce:
git checkout a21299785a
# save the attached .config to linux build tree
make ARCH=i386
All warnings (new ones prefixed by >>):
>> kernel//sched/core.c:94:13: warning: 'have_sched_energy_data' used
but never defined
static bool have_sched_energy_data(void);
^~~~~~~~~~~~~~~~~~~~~~
vim +/have_sched_energy_data +94 kernel//sched/core.c
93
> 94 static bool have_sched_energy_data(void);
95
Change-Id: I266b63ece6fb31d2b5b11821a8244e147ba6d3a4
Signed-off-by: Joel Fernandes <joelaf@google.com>
If the EAS energy model is missing or incomplete, i.e. sd_scs is NULL, then
sched_group_energy will return -EINVAL on the assumption that it raced with a
CPU hotplug event. In that case, energy_diff will return 0 and the energy-aware
wake path will silently fail to trigger any migrations.
This case can be triggered by disabling CONFIG_SCHED_MC on existing platforms,
so that there are no sched_groups with the SD_SHARE_CAP_STATES flag, so that
sd_scs is NULL.
Add checks so that a warning is printed if EAS is ever enabled while the
necessary data is not present.
Change-Id: Id233a510b5ad8b7fcecac0b1d789e730bbfc7c4a
Signed-off-by: Brendan Jackman <brendan.jackman@arm.com>
It is preferable that WALT window rollover occurs just
before a tick, since the tick is an opportune moment
to record a complete window's statistics, as well as report
those stats to the cpu frequency governor. When CONFIG_HZ
results in a TICK_NSEC that isn't a integral number, this
requirement may be violated. Account for this by reducing
the WALT window size to the nearest multiple of TICK_NSEC.
Commit d368c6faa1 ("sched: walt: fix window misalignment
when HZ=300") attempted to do this but WALT isn't using
MIN_SCHED_RAVG_WINDOW as the window size and the patch was
doing nothing.
Also, change the type of 'walt_disabled' to bool and warn
if an invalid window size causes WALT to be disabled.
Change-Id: Ie3dcfc21a3df4408254ca1165a355bbe391ed5c7
Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org>
(from https://patchwork.kernel.org/patch/9895261/)
This patch adds a parameter to select_task_rq, sibling_count_hint
allowing the caller, where it has this information, to inform the
sched_class the number of tasks that are being woken up as part of
the same event.
The wake_q mechanism is one case where this information is available.
select_task_rq_fair can then use the information to detect that it
needs to widen the search space for task placement in order to avoid
overloading the last-level cache domain's CPUs.
* * *
The reason I am investigating this change is the following use case
on ARM big.LITTLE (asymmetrical CPU capacity): 1 task per CPU, which
all repeatedly do X amount of work then
pthread_barrier_wait (i.e. sleep until the last task finishes its X
and hits the barrier). On big.LITTLE, the tasks which get a "big" CPU
finish faster, and then those CPUs pull over the tasks that are still
running:
v CPU v ->time->
-------------
0 (big) 11111 /333
-------------
1 (big) 22222 /444|
-------------
2 (LITTLE) 333333/
-------------
3 (LITTLE) 444444/
-------------
Now when task 4 hits the barrier (at |) and wakes the others up,
there are 4 tasks with prev_cpu=<big> and 0 tasks with
prev_cpu=<little>. want_affine therefore means that we'll only look
in CPUs 0 and 1 (sd_llc), so tasks will be unnecessarily coscheduled
on the bigs until the next load balance, something like this:
v CPU v ->time->
------------------------
0 (big) 11111 /333 31313\33333
------------------------
1 (big) 22222 /444|424\4444444
------------------------
2 (LITTLE) 333333/ \222222
------------------------
3 (LITTLE) 444444/ \1111
------------------------
^^^
underutilization
So, I'm trying to get want_affine = 0 for these tasks.
I don't _think_ any incarnation of the wakee_flips mechanism can help
us here because which task is waker and which tasks are wakees
generally changes with each iteration.
However pthread_barrier_wait (or more accurately FUTEX_WAKE) has the
nice property that we know exactly how many tasks are being woken, so
we can cheat.
It might be a disadvantage that we "widen" _every_ task that's woken in
an event, while select_idle_sibling would work fine for the first
sd_llc_size - 1 tasks.
IIUC, if wake_affine() behaves correctly this trick wouldn't be
necessary on SMP systems, so it might be best guarded by the presence
of SD_ASYM_CPUCAPACITY?
* * *
Final note..
In order to observe "perfect" behaviour for this use case, I also had
to disable the TTWU_QUEUE sched feature. Suppose during the wakeup
above we are working through the work queue and have placed tasks 3
and 2, and are about to place task 1:
v CPU v ->time->
--------------
0 (big) 11111 /333 3
--------------
1 (big) 22222 /444|4
--------------
2 (LITTLE) 333333/ 2
--------------
3 (LITTLE) 444444/ <- Task 1 should go here
--------------
If TTWU_QUEUE is enabled, we will not yet have enqueued task
2 (having instead sent a reschedule IPI) or attached its load to CPU
2. So we are likely to also place task 1 on cpu 2. Disabling
TTWU_QUEUE means that we enqueue task 2 before placing task 1,
solving this issue. TTWU_QUEUE is there to minimise rq lock
contention, and I guess that this contention is less of an issue on
big.LITTLE systems since they have relatively few CPUs, which
suggests the trade-off makes sense here.
Change-Id: I2080302839a263e0841a89efea8589ea53bbda9c
Signed-off-by: Brendan Jackman <brendan.jackman@arm.com>
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Energy cost estimation has been a long lasting challenge for WALT
because WALT guides CPU frequency based on the CPU utilization of
previous window. Consequently it's not possible to know newly
waking-up task's energy cost until WALT's end of the current window.
The WALT already tracks 'Previous Runnable Sum' (prev_runnable_sum)
and 'Cumulative Runnable Average' (cr_avg). They are designed for
CPU frequency guidance and task placement but unfortunately both
are not suitable for the energy cost estimation.
It's because using prev_runnable_sum for energy cost calculation would
make us to account CPU and task's energy solely based on activity in the
previous window so for example, any task didn't have an activity in the
previous window will be accounted as a 'zero energy cost' task.
Energy estimation with cr_avg is what energy_diff() relies on at present.
However cr_avg can only represent instantaneous picture of energy cost
thus for example, if a CPU was fully occupied for an entire WALT window
and became idle just before window boundary, and if there is a wake-up,
energy_diff() accounts that CPU is a 'zero energy cost' CPU.
As a result, introduce a new accounting unit 'Cumulative Window Demand'.
The cumulative window demand tracks all the tasks' demands have seen in
current window which is neither instantaneous nor actual execution time.
Because task demand represents estimated scaled execution time when the
task runs a full window, accumulation of all the demands represents
predicted CPU load at the end of window.
Thus we can estimate CPU's frequency at the end of current WALT window
with the cumulative window demand.
The use of prev_runnable_sum for the CPU frequency guidance and cr_avg
for the task placement have not changed and these are going to be used
for both purpose while this patch aims to add an additional statistics.
Change-Id: I9908c77ead9973a26dea2b36c001c2baf944d4f5
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
Patch 5680f23f20 ("sched/fair: streamline find_best_target
heuristics") has reworked function find_best_target, as result the
variable "target_util" is useless now. So remove it.
Change-Id: I5447062419e5828a49115119984fac6cd37db034
Signed-off-by: Leo Yan <leo.yan@linaro.org>
schedtune_initialized is protected by CONFIG_CGROUP_SCHEDTUNE, but
is being used without CONFIG_CGROUP_SCHEDTUNE being defined. Add
appropriate ifdefs around the usage of schedtune_initialized to
avoid a compilation error when CONFIG_CGROUP_SCHEDTUNE is not
defined.
Change-Id: Iab79bf053d74db3eeb84c09d71d43b4e39746ed2
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Fei Yang <fei.yang@intel.com>
The group_max_util() function is used to compute the maximum utilization
across the CPUs of a certain energy_env configuration.
Its main client is the energy_diff function when it needs to compute the
SG capacity for one of the before/after scheduling candidates.
Currently, the energy_diff function sets util_delta = 0 when it wants to
compute the energy corresponding to the scheduling candidate where the
task runs in the previous CPU. This implies that, for the task waking up
in the previous CPU we consider only its blocked load tracked by the CPU
RQ. However, in case of a medium-big task which is waking up on a long
time idle CPU, this blocked load can be already completely decayed.
More in general, the current approach is biased towards under-estimating
the capacity requirements for the "before" scheduling candidate.
This patch fixes this by:
- always use the cpu_util_wake() to properly get the utilization of a CPU
without any (partially decayed) contribution of the waking up task
- adding the task utilization to the cpu_util_wake just for the target
cpu
The "target CPU" is defined by the energy_env to be either the src_cpu or
the dst_cpu, depending on which scheduling candidate we are considering.
Finally, since this update removes the last usage of calc_util_delta()
this function is now safely removed.
Change-Id: I20ee1bcf40cee6bf6e265fb2d32ef79061ad6ced
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
The group_norm_util() function is used to compute the normalized
utilization of a SG given a certain energy_env configuration.
The main client of this function is the energy_diff function when it
comes to compute the SG energy for one of the before/after scheduling
candidates.
Currently, the energy_diff function sets util_delta = 0 when it wants to
compute the energy corresponding to the scheduling candidate where the
task runs in the previous CPU. This implies that, for the task waking up
in the previous CPU we consider only its blocked load tracked by the CPU
RQ. However, in case of a medium-big task which is waking up on a long
time idle CPU, this blocked load can be already completely decayed.
More in general, the current approach is biased towards under-estimating
the energy consumption for the "before" scheduling candidate.
This patch fixes this by:
- always use the cpu_util_wake() to properly get the utilization of a CPU
without any (partially decayed) contribution of the waking up task
- adding the task utilization to the cpu_util_wake just for the
target cpu
The "target CPU" is defined by the energy_env to be either the src_cpu
or the dst_cpu, depending on which scheduling candidate we are
considering.
This patch update also the definition of __cpu_norm_util(), which is
currently called just by the group_norm_util() function. This allows to
simplify the code by using this function just to normalize a specified
utilization with respect to a given capacity.
This update allows to completely remove any dependency of
group_norm_util() from calc_util_delta().
Change-Id: I3b6ec50ce8decb1521faae660e326ab3319d3c82
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
For non latency sensitive tasks the goal is to optimize for energy efficiency.
Thus, we should try our best to avoid moving a task on a CPU which is then
going to be marked as overutilized.
Let's use the capacity_margin metric to verify if a candidate target CPU
should be considered without risking to bail out of EAS mode.
Change-Id: Ib3697106f4073aedf4a6c6ce42bd5d000fa8c007
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
The find_best_target can sometimes not return a valid backup CPU, either
because it cannot find one or just becasue it returns prev_cpu as a backup.
In these cases we should skip the energy_diff evaluation for the backup CPU.
Change-Id: I3787dbdfe74122348dd7a7485b88c4679051bd32
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
