[ Upstream commit 9ff6e943bce67d125781fe4780a5d6f072dc44c0 ]
padata_sysfs_store() was copied from padata_sysfs_show() but this check
was not adapted. Today there is no attribute which can fail this
check, but if there is one it may as well be correct.
Fixes: 5e017dc3f8 ("padata: Added sysfs primitives to padata subsystem")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 472a989029aac2b78ef2f0b18b27c568bf76d104 ]
init_ixp_crypto() calls of_parse_phandle_with_fixed_args() multiple
times, but does not release all the obtained refcounts. Fix it by adding
of_node_put() calls.
This bug was found by an experimental static analysis tool that I am
developing.
Fixes: 76f24b4f46 ("crypto: ixp4xx - Add device tree support")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5a9d959936499a3106a1bf3b9070875d0d3dec4 ]
When the digest alg is HMAC-SHAx or another, the authsize may be less
than 4 bytes and mac_len of the BD is set to zero, the hardware considers
it a BD configuration error and reports a ras error, so the sec driver
needs to switch to software calculation in this case, this patch add a
check for it and remove unnecessary check that has been done by crypto.
Fixes: 2f072d75d1 ("crypto: hisilicon - Add aead support on SEC2")
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd337f852b2677b53d0859a47b58e6e6bd189f30 ]
When the AEAD algorithm is used for encryption or decryption,
the input authentication length varies, the hardware needs to
obtain the input length to pass the integrity check verification.
Currently, the driver uses a fixed authentication length,which
causes decryption failure, so the length configuration is modified.
In addition, the step of setting the auth length is unnecessary,
so it was deleted from the setkey function.
Fixes: 2f072d75d1 ("crypto: hisilicon - Add aead support on SEC2")
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1bed82257b1881b689ee41f14ecb4c20a273cac0 ]
Add the printf of an error message and optimized the handling
process of ret.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: fd337f852b26 ("crypto: hisilicon/sec2 - fix for aead icv error")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a2319308de88b9e819c0b43d0fccd857123eb31 ]
There have been intermittent issues with the SPDIF output on H3
and H2+ devices which has been fixed by setting the s_clk to 4
times the audio pll.
Add a quirk for the clock multiplier as not every supported SoC
requires it. Without the multiplier, the audio at normal sampling
rates was distorted and did not play at higher sampling rates.
Fixes: 1bd92af877 ("ASoC: sun4i-spdif: Add support for the H3 SoC")
Signed-off-by: George Lander <lander@jagmn.com>
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Link: https://patch.msgid.link/20241111165600.57219-2-codekipper@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e10500b69c3f3378f3dcfc8c2fe4cdb74fc844f5 ]
Libelf functions do not set errno on failure. Instead, it relies on its
internal _elf_errno value, that can be retrieved via elf_errno (or the
corresponding message via elf_errmsg()). From "man libelf":
If a libelf function encounters an error it will set an internal
error code that can be retrieved with elf_errno. Each thread
maintains its own separate error code. The meaning of each error
code can be determined with elf_errmsg, which returns a string
describing the error.
As a consequence, libbpf should not return -errno when a function from
libelf fails, because an empty value will not be interpreted as an error
and won't prevent the program to stop. This is visible in
bpf_linker__add_file(), for example, where we call a succession of
functions that rely on libelf:
err = err ?: linker_load_obj_file(linker, filename, opts, &obj);
err = err ?: linker_append_sec_data(linker, &obj);
err = err ?: linker_append_elf_syms(linker, &obj);
err = err ?: linker_append_elf_relos(linker, &obj);
err = err ?: linker_append_btf(linker, &obj);
err = err ?: linker_append_btf_ext(linker, &obj);
If the object file that we try to process is not, in fact, a correct
object file, linker_load_obj_file() may fail with errno not being set,
and return 0. In this case we attempt to run linker_append_elf_sysms()
and may segfault.
This can happen (and was discovered) with bpftool:
$ bpftool gen object output.o sample_ret0.bpf.c
libbpf: failed to get ELF header for sample_ret0.bpf.c: invalid `Elf' handle
zsh: segmentation fault (core dumped) bpftool gen object output.o sample_ret0.bpf.c
Fix the issue by returning a non-null error code (-EINVAL) when libelf
functions fail.
Fixes: faf6ed321c ("libbpf: Add BPF static linker APIs")
Signed-off-by: Quentin Monnet <qmo@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241205135942.65262-1-qmo@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2f0791124a1b6ca8d570110cbd487969d9d41ef ]
Commit f803bcf9208a ("selftests/bpf: Prevent client connect before
server bind in test_tc_tunnel.sh") added code that waits for the
netcat server to start before the netcat client attempts to connect to
it. However, not all calls to 'server_listen' were guarded.
This patch adds the existing 'wait_for_port' guard after the remaining
call to 'server_listen'.
Fixes: f803bcf9208a ("selftests/bpf: Prevent client connect before server bind in test_tc_tunnel.sh")
Signed-off-by: Marco Leogrande <leogrande@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20241202204530.1143448-1-leogrande@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98ebe5ef6f5c4517ba92fb3e56f95827ebea83fd ]
USDT ELF note optionally can record an offset of .stapsdt.base, which is
used to make adjustments to USDT target attach address. Currently,
libbpf will do this address adjustment unconditionally if it finds
.stapsdt.base ELF section in target binary. But there is a corner case
where .stapsdt.base ELF section is present, but specific USDT note
doesn't reference it. In such case, libbpf will basically just add base
address and end up with absolutely incorrect USDT target address.
This adjustment has to be done only if both .stapsdt.sema section is
present and USDT note is recording a reference to it.
Fixes: 74cc6311ce ("libbpf: Add USDT notes parsing and resolution logic")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20241121224558.796110-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d640627663bfe7d8963c7615316d7d4ef60f3b0b ]
In case of possible unpredictably large arguments passed to
rose_setsockopt() and multiplied by extra values on top of that,
integer overflows may occur.
Do the safest minimum and fix these issues by checking the
contents of 'opt' and returning -EINVAL if they are too large. Also,
switch to unsigned int and remove useless check for negative 'opt'
in ROSE_IDLE case.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://patch.msgid.link/20250115164220.19954-1-n.zhandarovich@fintech.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25c1a9ca53db5780757e7f53e688b8f916821baa ]
I noticed that HyStart incorrectly marks the start of rounds,
leading to inaccurate measurements of ACK train lengths and
resetting the `ca->sample_cnt` variable. This inaccuracy can impact
HyStart's functionality in terminating exponential cwnd growth during
Slow-Start, potentially degrading TCP performance.
The issue arises because the changes introduced in commit 4e1fddc98d
("tcp_cubic: fix spurious Hystart ACK train detections for not-cwnd-limited flows")
moved the caller of the `bictcp_hystart_reset` function inside the `hystart_update` function.
This modification added an additional condition for triggering the caller,
requiring that (tcp_snd_cwnd(tp) >= hystart_low_window) must also
be satisfied before invoking `bictcp_hystart_reset`.
This fix ensures that `bictcp_hystart_reset` is correctly called
at the start of a new round, regardless of the congestion window size.
This is achieved by moving the condition
(tcp_snd_cwnd(tp) >= hystart_low_window)
from before calling `bictcp_hystart_reset` to after it.
I tested with a client and a server connected through two Linux software routers.
In this setup, the minimum RTT was 150 ms, the bottleneck bandwidth was 50 Mbps,
and the bottleneck buffer size was 1 BDP, calculated as (50M / 1514 / 8) * 0.150 = 619 packets.
I conducted the test twice, transferring data from the server to the client for 1.5 seconds.
Before the patch was applied, HYSTART-DELAY stopped the exponential growth of cwnd when
cwnd = 516, and the bottleneck link was not yet saturated (516 < 619).
After the patch was applied, HYSTART-ACK-TRAIN stopped the exponential growth of cwnd when
cwnd = 632, and the bottleneck link was saturated (632 > 619).
In this test, applying the patch resulted in 300 KB more data delivered.
Fixes: 4e1fddc98d ("tcp_cubic: fix spurious Hystart ACK train detections for not-cwnd-limited flows")
Signed-off-by: Mahdi Arghavani <ma.arghavani@yahoo.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Haibo Zhang <haibo.zhang@otago.ac.nz>
Cc: David Eyers <david.eyers@otago.ac.nz>
Cc: Abbas Arghavani <abbas.arghavani@mdu.se>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4395a44acb15850e492dd1de9ec4b6479d96bc80 ]
When getting the IRQ we use k3_udma_glue_tx_get_irq() which returns
negative error value on error. So not NULL check is not sufficient
to deteremine if IRQ is valid. Check that IRQ is greater then zero
to ensure it is valid.
There is no issue at probe time but at runtime user can invoke
.set_channels which results in the following call chain.
am65_cpsw_set_channels()
am65_cpsw_nuss_update_tx_rx_chns()
am65_cpsw_nuss_remove_tx_chns()
am65_cpsw_nuss_init_tx_chns()
At this point if am65_cpsw_nuss_init_tx_chns() fails due to
k3_udma_glue_tx_get_irq() then tx_chn->irq will be set to a
negative value.
Then, at subsequent .set_channels with higher channel count we
will attempt to free an invalid IRQ in am65_cpsw_nuss_remove_tx_chns()
leading to a kernel warning.
The issue is present in the original commit that introduced this driver,
although there, am65_cpsw_nuss_update_tx_rx_chns() existed as
am65_cpsw_nuss_update_tx_chns().
Fixes: 93a7653031 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a4b61406395291ffb7220a10e8951a9a8684819 ]
The conntrack entry is already public, there is a small chance that another
CPU is handling a packet in reply direction and racing with the tcp state
update.
Move this under ct spinlock.
This is done once, when ct is about to be offloaded, so this should
not result in a noticeable performance hit.
Fixes: 8437a6209f ("netfilter: nft_flow_offload: set liberal tracking mode for tcp")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc50835e83f60f56e9bec2b392fb5544f250fb6f ]
Lion Ackermann was able to create a UAF which can be abused for privilege
escalation with the following script
Step 1. create root qdisc
tc qdisc add dev lo root handle 1:0 drr
step2. a class for packet aggregation do demonstrate uaf
tc class add dev lo classid 1:1 drr
step3. a class for nesting
tc class add dev lo classid 1:2 drr
step4. a class to graft qdisc to
tc class add dev lo classid 1:3 drr
step5.
tc qdisc add dev lo parent 1:1 handle 2:0 plug limit 1024
step6.
tc qdisc add dev lo parent 1:2 handle 3:0 drr
step7.
tc class add dev lo classid 3:1 drr
step 8.
tc qdisc add dev lo parent 3:1 handle 4:0 pfifo
step 9. Display the class/qdisc layout
tc class ls dev lo
class drr 1:1 root leaf 2: quantum 64Kb
class drr 1:2 root leaf 3: quantum 64Kb
class drr 3:1 root leaf 4: quantum 64Kb
tc qdisc ls
qdisc drr 1: dev lo root refcnt 2
qdisc plug 2: dev lo parent 1:1
qdisc pfifo 4: dev lo parent 3:1 limit 1000p
qdisc drr 3: dev lo parent 1:2
step10. trigger the bug <=== prevented by this patch
tc qdisc replace dev lo parent 1:3 handle 4:0
step 11. Redisplay again the qdiscs/classes
tc class ls dev lo
class drr 1:1 root leaf 2: quantum 64Kb
class drr 1:2 root leaf 3: quantum 64Kb
class drr 1:3 root leaf 4: quantum 64Kb
class drr 3:1 root leaf 4: quantum 64Kb
tc qdisc ls
qdisc drr 1: dev lo root refcnt 2
qdisc plug 2: dev lo parent 1:1
qdisc pfifo 4: dev lo parent 3:1 refcnt 2 limit 1000p
qdisc drr 3: dev lo parent 1:2
Observe that a) parent for 4:0 does not change despite the replace request.
There can only be one parent. b) refcount has gone up by two for 4:0 and
c) both class 1:3 and 3:1 are pointing to it.
Step 12. send one packet to plug
echo "" | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888,priority=$((0x10001))
step13. send one packet to the grafted fifo
echo "" | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888,priority=$((0x10003))
step14. lets trigger the uaf
tc class delete dev lo classid 1:3
tc class delete dev lo classid 1:1
The semantics of "replace" is for a del/add _on the same node_ and not
a delete from one node(3:1) and add to another node (1:3) as in step10.
While we could "fix" with a more complex approach there could be
consequences to expectations so the patch takes the preventive approach of
"disallow such config".
Joint work with Lion Ackermann <nnamrec@gmail.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250116013713.900000-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12e070eb6964b341b41677fd260af5a305316a1f ]
The following trace can be seen if a device is being unregistered while
its number of channels are being modified.
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 3 PID: 3754 at kernel/locking/mutex.c:564 __mutex_lock+0xc8a/0x1120
CPU: 3 UID: 0 PID: 3754 Comm: ethtool Not tainted 6.13.0-rc6+ #771
RIP: 0010:__mutex_lock+0xc8a/0x1120
Call Trace:
<TASK>
ethtool_check_max_channel+0x1ea/0x880
ethnl_set_channels+0x3c3/0xb10
ethnl_default_set_doit+0x306/0x650
genl_family_rcv_msg_doit+0x1e3/0x2c0
genl_rcv_msg+0x432/0x6f0
netlink_rcv_skb+0x13d/0x3b0
genl_rcv+0x28/0x40
netlink_unicast+0x42e/0x720
netlink_sendmsg+0x765/0xc20
__sys_sendto+0x3ac/0x420
__x64_sys_sendto+0xe0/0x1c0
do_syscall_64+0x95/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
This is because unregister_netdevice_many_notify might run before the
rtnl lock section of ethnl operations, eg. set_channels in the above
example. In this example the rss lock would be destroyed by the device
unregistration path before being used again, but in general running
ethnl operations while dismantle has started is not a good idea.
Fix this by denying any operation on devices being unregistered. A check
was already there in ethnl_ops_begin, but not wide enough.
Note that the same issue cannot be seen on the ioctl version
(__dev_ethtool) because the device reference is retrieved from within
the rtnl lock section there. Once dismantle started, the net device is
unlisted and no reference will be found.
Fixes: dde91ccfa2 ("ethtool: do not perform operations on net devices being unregistered")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20250116092159.50890-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70d81f25cc92cc4e914516c9935ae752f27d78ad ]
Currently, mlxfw kernel module limits FW flash image size to be
10MB at most, preventing the ability to burn recent BlueField-3
FW that exceeds the said size limit.
Thus, drop the hard coded limit. Instead, rely on FW's
max_component_size threshold that is reported in MCQI register
as the size limit for FW image.
Fixes: 410ed13cae ("Add the mlxfw module for Mellanox firmware flash process")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/1737030796-1441634-1-git-send-email-moshe@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1f9f79fa2af8e3b45cffdeef66e05833480148a ]
The following problem was encountered during stability test:
(NULL net_device): NAPI poll function process_backlog+0x0/0x530 \
returned 1, exceeding its budget of 0.
------------[ cut here ]------------
list_add double add: new=ffff88905f746f48, prev=ffff88905f746f48, \
next=ffff88905f746e40.
WARNING: CPU: 18 PID: 5462 at lib/list_debug.c:35 \
__list_add_valid_or_report+0xf3/0x130
CPU: 18 UID: 0 PID: 5462 Comm: ping Kdump: loaded Not tainted 6.13.0-rc7+
RIP: 0010:__list_add_valid_or_report+0xf3/0x130
Call Trace:
? __warn+0xcd/0x250
? __list_add_valid_or_report+0xf3/0x130
enqueue_to_backlog+0x923/0x1070
netif_rx_internal+0x92/0x2b0
__netif_rx+0x15/0x170
loopback_xmit+0x2ef/0x450
dev_hard_start_xmit+0x103/0x490
__dev_queue_xmit+0xeac/0x1950
ip_finish_output2+0x6cc/0x1620
ip_output+0x161/0x270
ip_push_pending_frames+0x155/0x1a0
raw_sendmsg+0xe13/0x1550
__sys_sendto+0x3bf/0x4e0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x5b/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The reproduction command is as follows:
sysctl -w net.core.dev_weight=0
ping 127.0.0.1
This is because when the napi's weight is set to 0, process_backlog() may
return 0 and clear the NAPI_STATE_SCHED bit of napi->state, causing this
napi to be re-polled in net_rx_action() until __do_softirq() times out.
Since the NAPI_STATE_SCHED bit has been cleared, napi_schedule_rps() can
be retriggered in enqueue_to_backlog(), causing this issue.
Making the napi's weight always non-zero solves this problem.
Triggering this issue requires system-wide admin (setting is
not namespaced).
Fixes: e387660545 ("[NET]: Fix sysctl net.core.dev_weight")
Fixes: 3d48b53fb2 ("net: dev_weight: TX/RX orthogonality")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Link: https://patch.msgid.link/20250116143053.4146855-1-liujian56@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7f12857f095ef38523399d47e68787b357232f6 ]
In wrpll_configure_for_rate() we try to determine the best PLL
configuration for a target rate. However, in the loop where we try
values of R, we should compare the derived `vco` with `target_vco_rate`.
However, we were in fact comparing it with `target_rate`, which is
actually after Q shift. This is incorrect, and sometimes can result in
suboptimal clock rates. Fix it.
Fixes: 7b9487a9a5 ("clk: analogbits: add Wide-Range PLL library")
Signed-off-by: Bo Gan <ganboing@gmail.com>
Link: https://lore.kernel.org/r/20240830061639.2316-1-ganboing@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a0d24775cdee2b8dc14bfa4f4418c930ab1ac57 ]
In 'cfg80211_scan_6ghz()', an instances of 'struct cfg80211_colocated_ap'
are allocated as if they would have 'ssid' as trailing VLA member. Since
this is not so, extra IEEE80211_MAX_SSID_LEN bytes are not needed.
Briefly tested with KUnit.
Fixes: c8cb5b854b ("nl80211/cfg80211: support 6 GHz scanning")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://patch.msgid.link/20250113155417.552587-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0fca7784b7a14d4ede64f479662afb98876ec7f8 ]
When the scan parameters for a 6GHz scan specify a unicast
BSSID address, and the corresponding AP is found in the scan
list, add a corresponding entry in the collocated AP list,
so this AP would be directly probed even if it was not
advertised as a collocated AP.
This is needed for handling a scan request that is intended
for a ML probe flow, where user space can requests a scan
to retrieve information for other links in the AP MLD.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.54b954bc02ad.I1c072793d3d77a4c8fbbc64b4db5cce1bbb00382@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Stable-dep-of: 1a0d24775cde ("wifi: cfg80211: adjust allocation of colocated AP data")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02bc220dc6dc7c56edc4859bc5dd2c08b95d5fb5 ]
intptr_t and uintptr_t are not big enough types on 32-bit architectures
when printing 64-bit values, resulting to the following incorrect
diagnostic output:
# get_syscall_info.c:209:get_syscall_info:Expected exp_args[2] (3134324433) == info.entry.args[1] (3134324433)
Replace intptr_t and uintptr_t with intmax_t and uintmax_t, respectively.
With this fix, the same test produces more usable diagnostic output:
# get_syscall_info.c:209:get_syscall_info:Expected exp_args[2] (3134324433) == info.entry.args[1] (18446744072548908753)
Link: https://lore.kernel.org/r/20250108170757.GA6723@strace.io
Fixes: b5bb6d3068 ("selftests/seccomp: fix 32-bit build warnings")
Signed-off-by: Dmitry V. Levin <ldv@strace.io>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0834667545962ef1c5e8684ed32b45d9c574acd3 ]
Commit 3c55e94c0a ("cpufreq: ACPI: Extend frequency tables to cover
boost frequencies") introduced an assumption in acpi_cpufreq_cpu_init()
that the first entry in the P-state table was the nominal frequency.
This assumption is incorrect. The frequency corresponding to the P0
P-State need not be the same as the nominal frequency advertised via
CPPC.
Since the driver is using the CPPC.highest_perf and CPPC.nominal_perf
to compute the boost-ratio, it makes sense to use CPPC.nominal_freq to
compute the max-frequency. CPPC.nominal_freq is advertised on
platforms supporting CPPC revisions 3 or higher.
Hence, fallback to using the first entry in the P-State table only on
platforms that do not advertise CPPC.nominal_freq.
Fixes: 3c55e94c0a ("cpufreq: ACPI: Extend frequency tables to cover boost frequencies")
Tested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20250113044107.566-1-gautham.shenoy@amd.com
[ rjw: Retain reverse X-mas tree ordering of local variable declarations ]
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1b1e133a770fcdbd89551651232b034d2f7a27a ]
When initializing the network card, unplugging the device will
trigger an -EPROTO error, resulting in a flood of error messages
being printed frantically.
The exception is printed as follows：
mt76x2u 2-2.4:1.0: vendor request req:47 off:9018 failed:-71
mt76x2u 2-2.4:1.0: vendor request req:47 off:9018 failed:-71
...
It will continue to print more than 2000 times for about 5 minutes,
causing the usb device to be unable to be disconnected. During this
period, the usb port cannot recognize the new device because the old
device has not disconnected.
There may be other operating methods that cause -EPROTO, but -EPROTO is
a low-level hardware error. It is unwise to repeat vendor requests
expecting to read correct data. It is a better choice to treat -EPROTO
and -ENODEV the same way.
Similar to commit 9b0f100c19 ("mt76: usb: process URBs with status
EPROTO properly") do no schedule rx_worker for urb marked with status
set -EPROTO. I also reproduced this situation when plugging and
unplugging the device, and this patch is effective.
Just do not vendor request again for urb marked with status set -EPROTO.
Link: https://lore.kernel.org/all/531681bd-30f5-4a70-a156-bf8754b8e072@intel.com/
Link: https://lore.kernel.org/all/D4B9CC1FFC0CBAC3+20250105040607.154706-1-wangyuli@uniontech.com/
Fixes: b40b15e152 ("mt76: add usb support to mt76 layer")
Co-developed-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Link: https://patch.msgid.link/9DD7DE7AAB497CB7+20250113070241.63590-1-wangyuli@uniontech.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4b6539038c1aa1ae871aacf6e41b566c3613993 ]
When recvmsg with MSG_PEEK flag, the data will be copied to
user's buffer without advancing consume cursor and without
reducing the length of rx available data. Once the expected
peek length is larger than the value of bytes_to_rcv, in the
loop of do while in smc_rx_recvmsg, the first loop will copy
bytes_to_rcv bytes of data from the position local_tx_ctrl.cons,
the second loop will copy the min(bytes_to_rcv, read_remaining)
bytes from the position local_tx_ctrl.cons again because of the
lacking of process with advancing consume cursor and reducing
the length of available data. So do the subsequent loops. The
data copied in the second loop and the subsequent loops will
result in data error, as it should not be copied if no more data
arrives and it should be copied from the position advancing
bytes_to_rcv bytes from the local_tx_ctrl.cons if more data arrives.
This issue can be reproduce by the following python script:
server.py:
import socket
import time
server_ip = '0.0.0.0'
server_port = 12346
server_socket = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
server_socket.bind((server_ip, server_port))
server_socket.listen(1)
print('Server is running and listening for connections...')
conn, addr = server_socket.accept()
print('Connected by', addr)
while True:
data = conn.recv(1024)
if not data:
break
print('Received request:', data.decode())
conn.sendall(b'Hello, client!\n')
time.sleep(5)
conn.sendall(b'Hello, again!\n')
conn.close()
client.py:
import socket
server_ip = '<server ip>'
server_port = 12346
resp=b'Hello, client!\nHello, again!\n'
client_socket = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
client_socket.connect((server_ip, server_port))
request = 'Hello, server!'
client_socket.sendall(request.encode())
peek_data = client_socket.recv(len(resp),
socket.MSG_PEEK | socket.MSG_WAITALL)
print('Peeked data:', peek_data.decode())
client_socket.close()
Fixes: 952310ccf2 ("smc: receive data from RMBE")
Reported-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Link: https://patch.msgid.link/20250104143201.35529-1-guangguan.wang@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 996c934c8c196144af386c4385f61fcd5349af28 ]
If firmware boot failes, runtime pm is put too often:
[12092.708099] wlcore: ERROR firmware boot failed despite 3 retries
[12092.708099] wl18xx_driver wl18xx.1.auto: Runtime PM usage count underflow!
Fix that by redirecting all error gotos before runtime_get so that runtime is
not put.
Fixes: c40aad28a3 ("wlcore: Make sure firmware is initialized in wl1271_op_add_interface()")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Michael Nemanov <michael.nemanov@ti.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250104195507.402673-1-akemnade@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 805f7aaf7fee14a57b56af01d270edf6c10765e8 ]
It is possible for multiple, simultaneous callers calling
device_node_get_regmap() with the same node to fail to find an entry in
the syscon_list. There is a period of time while the first caller is
calling of_syscon_register() that subsequent callers also fail to find
an entry in the syscon_list and then call of_syscon_register() a second
time.
Fix this by keeping the lock held until after of_syscon_register()
completes and adds the node to syscon_list. Convert the spinlock to a
mutex as many of the functions called in of_syscon_register() such as
kzalloc() and of_clk_get() may sleep.
Fixes: bdb0066df9 ("mfd: syscon: Decouple syscon interface from platform devices")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Tested-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Link: https://lore.kernel.org/r/20241217-syscon-fixes-v2-1-4f56d750541d@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 769cb63166d90f1fadafa4352f180cbd96b6cb77 ]
The of_syscon_register_regmap() API allows an externally created regmap
to be registered with syscon. This regmap can then be returned to client
drivers using the syscon_regmap_lookup_by_phandle() APIs.
The API is used by platforms where mmio access to the syscon registers is
not possible, and a underlying soc driver like exynos-pmu provides a SoC
specific regmap that can issue a SMC or hypervisor call to write the
register.
This approach keeps the SoC complexities out of syscon, but allows common
drivers such as syscon-poweroff, syscon-reboot and friends that are used
by many SoCs already to be re-used.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240621115544.1655458-2-peter.griffin@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Stable-dep-of: 805f7aaf7fee ("mfd: syscon: Fix race in device_node_get_regmap()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0db017f8edd9b9af818bc1d68ba578df1b4c4628 ]
The kernel coding style does not require 'extern' in function prototypes
in .h files, so remove them as they are not needed.
To avoid checkpatch warnings such as
CHECK: Lines should not end with a '('
+struct regmap *syscon_regmap_lookup_by_phandle(
The indentation is also updated. No functional changes in this patch.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240220115012.471689-3-peter.griffin@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Stable-dep-of: 805f7aaf7fee ("mfd: syscon: Fix race in device_node_get_regmap()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f760a4bb5e927a133dcd75f7b69ccae2a331e42c ]
Similar to the earlier fixes meant for sm8x50 and x1e platforms,
we have to stop using the shared clk ops for sdm845 QUPs as well.
As Stephen Boyd pointed out in earlier fixes, there wasn't a problem
to mark QUP clks shared until we started parking shared RCGs at clk
registration time in commit 01a0a6cc8cfd ("clk: qcom: Park shared RCGs
upon registration"). Parking at init is actually harmful to the UART
when earlycon is used. If the device is pumping out data while the
frequency changes and we see garbage on the serial console until the
driver can probe and actually set a proper frequency.
This patch reverts the QUP clk sharing ops part of commit 06391eddb6
("clk: qcom: Add Global Clock controller (GCC) driver for SDM845"), so
that the QUPs on sdm845 don't get parked during clk registration and
break UART operations.
Fixes: 01a0a6cc8cfd ("clk: qcom: Park shared RCGs upon registration")
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Link: https://lore.kernel.org/r/20241209174912.2526928-1-amit.pundir@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d38eb7f7b26261a0b642f6e0923269c7c000a97 ]
_opp_add_static_v2() leaks the obtained OF node reference when
_of_opp_alloc_required_opps() fails. Add an of_node_put() call in the
error path.
Fixes: 3466ea2cd6 ("OPP: Don't drop opp->np reference while it is still in use")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dddca3b2fc676113c58b04aaefe84bfb958ac83e ]
of_regulator_match() does not release the OF node reference in the error
path, resulting in an OF node leak. Therefore, call of_node_put() on the
obtained nodes before returning the EINVAL error.
Since it is possible that some drivers call this function and do not
exit on failure, such as s2mps11_pmic_driver, clear the init_data and
of_node in the error path.
This was reported by an experimental verification tool that I am
developing. As I do not have access to actual devices nor the QEMU board
configuration to test drivers that call this function, no runtime test
was able to be performed.
Fixes: 1c8fa58f47 ("regulator: Add generic DT parsing for regulators")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://patch.msgid.link/20250104080453.2153592-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3fff5da4ca2164bb4d0f1e6cd33f6eb8a0e73e50 ]
Prevent adding a device which is already a team device lower,
e.g. adding veth0 if vlan1 was already added and veth0 is a lower of
vlan1.
This is not useful in practice and can lead to recursive locking:
$ ip link add veth0 type veth peer name veth1
$ ip link set veth0 up
$ ip link set veth1 up
$ ip link add link veth0 name veth0.1 type vlan protocol 802.1Q id 1
$ ip link add team0 type team
$ ip link set veth0.1 down
$ ip link set veth0.1 master team0
team0: Port device veth0.1 added
$ ip link set veth0 down
$ ip link set veth0 master team0
============================================
WARNING: possible recursive locking detected
6.13.0-rc2-virtme-00441-ga14a429069bb #46 Not tainted
--------------------------------------------
ip/7684 is trying to acquire lock:
ffff888016848e00 (team->team_lock_key){+.+.}-{4:4}, at: team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973)
but task is already holding lock:
ffff888016848e00 (team->team_lock_key){+.+.}-{4:4}, at: team_add_slave (drivers/net/team/team_core.c:1147 drivers/net/team/team_core.c:1977)
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(team->team_lock_key);
lock(team->team_lock_key);
*** DEADLOCK ***
May be due to missing lock nesting notation
2 locks held by ip/7684:
stack backtrace:
CPU: 3 UID: 0 PID: 7684 Comm: ip Not tainted 6.13.0-rc2-virtme-00441-ga14a429069bb #46
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:122)
print_deadlock_bug.cold (kernel/locking/lockdep.c:3040)
__lock_acquire (kernel/locking/lockdep.c:3893 kernel/locking/lockdep.c:5226)
? netlink_broadcast_filtered (net/netlink/af_netlink.c:1548)
lock_acquire.part.0 (kernel/locking/lockdep.c:467 kernel/locking/lockdep.c:5851)
? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973)
? trace_lock_acquire (./include/trace/events/lock.h:24 (discriminator 2))
? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973)
? lock_acquire (kernel/locking/lockdep.c:5822)
? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973)
__mutex_lock (kernel/locking/mutex.c:587 kernel/locking/mutex.c:735)
? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973)
? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973)
? fib_sync_up (net/ipv4/fib_semantics.c:2167)
? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973)
team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973)
notifier_call_chain (kernel/notifier.c:85)
call_netdevice_notifiers_info (net/core/dev.c:1996)
__dev_notify_flags (net/core/dev.c:8993)
? __dev_change_flags (net/core/dev.c:8975)
dev_change_flags (net/core/dev.c:9027)
vlan_device_event (net/8021q/vlan.c:85 net/8021q/vlan.c:470)
? br_device_event (net/bridge/br.c:143)
notifier_call_chain (kernel/notifier.c:85)
call_netdevice_notifiers_info (net/core/dev.c:1996)
dev_open (net/core/dev.c:1519 net/core/dev.c:1505)
team_add_slave (drivers/net/team/team_core.c:1219 drivers/net/team/team_core.c:1977)
? __pfx_team_add_slave (drivers/net/team/team_core.c:1972)
do_set_master (net/core/rtnetlink.c:2917)
do_setlink.isra.0 (net/core/rtnetlink.c:3117)
Reported-by: syzbot+3c47b5843403a45aef57@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=3c47b5843403a45aef57
Fixes: 3d249d4ca7 ("net: introduce ethernet teaming device")
Signed-off-by: Octavian Purdila <tavip@google.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9b7c84d22fb1687d63ca2a386773015cf59436b ]
The CLKOUTn may be fed from PLL1/2/3, but the PLL1/2/3 has to be enabled
first by setting PLL_CLKE bit 11 in CCM_ANALOG_SYS_PLLn_GEN_CTRL register.
The CCM_ANALOG_SYS_PLLn_GEN_CTRL bit 11 is modeled by plln_out clock. Fix
the clock tree and place the clkout1/2 under plln_sel instead of plain plln
to let the clock subsystem correctly control the bit 11 and enable the PLL
in case the CLKOUTn is supplied by PLL1/2/3.
Fixes: 43896f56b5 ("clk: imx8mp: add clkout1/2 support")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20241112013718.333771-1-marex@denx.de
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e461a1cb43d69d2fc8a97e61916dce571e6bb31 ]
A redundant frequency update is only truly needed when there is a policy
limits change with a driver that specifies CPUFREQ_NEED_UPDATE_LIMITS.
In spite of that, drivers specifying CPUFREQ_NEED_UPDATE_LIMITS receive a
frequency update _all the time_, not just for a policy limits change,
because need_freq_update is never cleared.
Furthermore, ignore_dl_rate_limit()'s usage of need_freq_update also leads
to a redundant frequency update, regardless of whether or not the driver
specifies CPUFREQ_NEED_UPDATE_LIMITS, when the next chosen frequency is the
same as the current one.
Fix the superfluous updates by only honoring CPUFREQ_NEED_UPDATE_LIMITS
when there's a policy limits change, and clearing need_freq_update when a
requisite redundant update occurs.
This is neatly achieved by moving up the CPUFREQ_NEED_UPDATE_LIMITS test
and instead setting need_freq_update to false in sugov_update_next_freq().
Fixes: 600f5badb7 ("cpufreq: schedutil: Don't skip freq update when limits change")
Signed-off-by: Sultan Alsawaf (unemployed) <sultan@kerneltoast.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/20241212015734.41241-2-sultan@kerneltoast.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a853c609504e2d1d83e71285e3622fda1f1451d8 ]
All inet_getpeer() callers except ip4_frag_init() don't need
to acquire a permanent refcount on the inetpeer.
They can switch to full RCU protection.
Move the refcount_inc_not_zero() into ip4_frag_init(),
so that all the other callers no longer have to
perform a pair of expensive atomic operations on
a possibly contended cache line.
inet_putpeer() no longer needs to be exported.
After this patch, my DUT can receive 8,400,000 UDP packets
per second targeting closed ports, using 50% less cpu cycles
than before.
Also change two calls to l3mdev_master_ifindex() by
l3mdev_master_ifindex_rcu() (Ido ideas)
Fixes: 8c2bd38b95f7 ("icmp: change the order of rate limits")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241215175629.1248773-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
