[ Upstream commit 135780f104 ]
The current setting lives in bits 4:2 (as also defined by the mask) but
the current limit defines in the driver use bits 2:0 which should be
shifted over so they don't get masked out completely (except for 17.5mA
which became 10mA).
Now checking /sys/kernel/debug/regmap/1-0068/registers shows that the
current limit is applied correctly and doesn't take the default b000 =
42mA.
Fixes: fa877cf1ab ("leds: is31fl319x: Add support for is31fl319{0,1,3} chips")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Vincent Knecht <vincent.knecht@mailoo.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88f4a9f813 ]
Commit c412a97cf6 changed delete_work_func() to always perform an
inode lookup when gfs2_try_evict() fails. This doesn't make sense as a
gfs2_try_evict() failure indicates that the inode is likely still in
use. Revert that change.
Fixes: c412a97cf6 ("gfs2: Use TRY lock in gfs2_inode_lookup for UNLINKED inodes")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 104bb8a663 ]
when kmalloc() fail to allocate memory in kasprintf(), propname
will be NULL, strcmp() called by of_get_property() will cause
null pointer dereference.
So return ENOMEM if kasprintf() return NULL pointer.
Fixes: 3afb50d712 ("power: supply: core: Add some helpers to use the battery OCV capacity table")
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7aaa80098 ]
The pump_express_work which gets queued from an external_power_changed
callback might be pending / running on remove() (or on probe failure).
Add a devm action cancelling the work, to ensure that it is cancelled.
Note the devm action is added before devm_power_supply_register(), making
it run after devm unregisters the power_supply, so that the work cannot
be queued anymore (this is also why a devm action is used for this).
Fixes: 48f45b094d ("power: supply: bq25890: Support higher charging voltages through Pump Express+ protocol")
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5cddca235 ]
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Stable-dep-of: a7aaa80098 ("power: supply: bq25890: Ensure pump_express_work is cancelled on remove")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f5c10ecaf ]
Pull the regulator registration code into separate function, so it can
be extended to register more regulators later. Currently this is only
moving ifdeffery into one place and other preparatory changes. The
dev_err_probe() output string is changed to explicitly list vbus
regulator failure, so that once more regulators are registered, it
would be clear which one failed.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Stable-dep-of: a7aaa80098 ("power: supply: bq25890: Ensure pump_express_work is cancelled on remove")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54c03bfd09 ]
of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: 11cb8da018 ("power: supply: Add charger driver for Rockchip RK817")
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Reviewed-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4d33381b1 ]
The ab8500_charger_init() returns the platform_driver_register() directly
without checking its return value, if platform_driver_register() failed,
all ab8500_charger_component_drivers are not unregistered.
Fix by unregister ab8500_charger_component_drivers when
platform_driver_register() failed.
Fixes: 1c1f13a006 ("power: supply: ab8500: Move to componentized binding")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ffa9f713c ]
The ssi_init() returns the platform_driver_register() directly without
checking its return value, if platform_driver_register() failed, the
ssi_pdriver is not unregistered.
Fix by unregister ssi_pdriver when the last platform_driver_register()
failed.
Fixes: 0fae198988 ("HSI: omap_ssi: built omap_ssi and omap_ssi_port into one module")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97f2b4ddb0 ]
cw_bat_probe() calls create_singlethread_workqueue() and not checked the
ret value, which may return NULL. And a null-ptr-deref may happen:
cw_bat_probe()
create_singlethread_workqueue() # failed, cw_bat->wq is NULL
queue_delayed_work()
queue_delayed_work_on()
__queue_delayed_work() # warning here, but continue
__queue_work() # access wq->flags, null-ptr-deref
Check the ret value and return -ENOMEM if it is NULL.
Fixes: b4c7715c10 ("power: supply: add CellWise cw2015 fuel gauge driver")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 955bee204f ]
If devm_gpiod_get_optional() returns error, the charger should be
freed before z2_batt_probe returns according to the context. We
fix it by just gotoing to 'err' branch.
Fixes: a3b4388ea1 ("power: supply: z2_battery: Convert to GPIO descriptors")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f520ce179 ]
perf doesn't provide proper symbol information for specially crafted
.debug files.
Sometimes .debug file may not have similar program header as runtime
ELF file. For example if we generate .debug file using objcopy
--only-keep-debug resulting file will not contain .text, .data and
other runtime sections. That means corresponding program headers will
have zero FileSiz and modified Offset.
Example: program header of text section of libxxx.so:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
LOAD 0x00000000003d3000 0x00000000003d3000 0x00000000003d3000
0x000000000055ae80 0x000000000055ae80 R E 0x1000
Same program header after executing:
objcopy --only-keep-debug libxxx.so libxxx.so.debug
LOAD 0x0000000000001000 0x00000000003d3000 0x00000000003d3000
0x0000000000000000 0x000000000055ae80 R E 0x1000
Offset and FileSiz have been changed.
Following formula will not provide correct value, if program header
taken from .debug file (syms_ss):
sym.st_value -= phdr.p_vaddr - phdr.p_offset;
Correct program header information is located inside runtime ELF
file (runtime_ss).
Fixes: 2d86612aac ("perf symbol: Correct address for bss symbols")
Signed-off-by: Ajay Kaher <akaher@vmware.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Makhalov <amakhalov@vmware.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srivatsa S. Bhat <srivatsab@vmware.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Vasavi Sirnapalli <vsirnapalli@vmware.com>
Link: http://lore.kernel.org/lkml/1669198696-50547-1-git-send-email-akaher@vmware.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03e9a5d8eb ]
On Arm64 a case is perf tools fails to find the corresponding trace
point folder for system calls listed in the table 'syscalltbl_arm64',
e.g. the generated system call table contains "lookup_dcookie" but we
cannot find out the matched trace point folder for it.
We need to figure out if there have any issue for the generated system
call table, on the other hand, we need to handle the case when trace
point folder is missed under sysfs, this patch sets the flag
syscall::nonexistent as true and returns the error from
trace__read_syscall_info().
Another problem is for trace__syscall_info(), it returns two different
values if a system call doesn't exist: at the first time calling
trace__syscall_info() it returns NULL when the system call doesn't exist,
later if call trace__syscall_info() again for the same missed system
call, it returns pointer of syscall. trace__syscall_info() checks the
condition 'syscalls.table[id].name == NULL', but the name will be
assigned in the first invoking even the system call is not found.
So checking system call's name in trace__syscall_info() is not the right
thing to do, this patch simply checks flag syscall::nonexistent to make
decision if a system call exists or not, finally trace__syscall_info()
returns the consistent result (NULL) if a system call doesn't existed.
Fixes: b8b1033fca ("perf trace: Mark syscall ids that are not allocated to avoid unnecessary error messages")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: bpf@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221121075237.127706-4-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef9b7bf52c ]
Daniel reported that the commit 1ae3e78c08 ("watchdog: iTCO_wdt: No
need to stop the timer in probe") makes QEMU implementation of the iTCO
watchdog not to trigger reboot anymore when NO_REBOOT flag is initially
cleared using this option (in QEMU command line):
-global ICH9-LPC.noreboot=false
The problem with the commit is that it left the unconditional setting of
NO_REBOOT that is not cleared anymore when the kernel keeps pinging the
watchdog (as opposed to the previous code that called iTCO_wdt_stop()
that cleared it).
Fix this so that we only set NO_REBOOT if the watchdog was not initially
running.
Fixes: 1ae3e78c08 ("watchdog: iTCO_wdt: No need to stop the timer in probe")
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221028062750.45451-1-mika.westerberg@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b79480ce1 ]
If device_add() succeeds, we should call device_del() when want to
get rid of it, so move it into proper jump symbol.
Otherwise, when __power_supply_register() returns fail and goto
wakeup_init_failed to exit, there is still residue device file in sysfs.
When attempt to probe device again, sysfs would complain as below:
sysfs: cannot create duplicate filename '/devices/platform/i2c/i2c-0/0-001c/power_supply/adp5061'
Call Trace:
dump_stack_lvl+0x68/0x85
sysfs_warn_dup.cold+0x1c/0x29
sysfs_create_dir_ns+0x1b1/0x1d0
kobject_add_internal+0x143/0x390
kobject_add+0x108/0x170
Fixes: 80c6463e2f ("power_supply: Fix Oops from NULL pointer dereference from wakeup_source_activate")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1aff514e1d ]
If ssi_add_controller() returns error, it should call hsi_put_controller()
to give up the reference that was set in hsi_alloc_controller(), so that
it can call hsi_controller_release() to free controller and ports that
allocated in hsi_alloc_controller().
Fixes: b209e047bc ("HSI: Introduce OMAP SSI driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5181c35ed ]
In error label 'out1' path in ssi_probe(), the pm_runtime_enable()
has not been called yet, so pm_runtime_disable() is not needed.
Fixes: b209e047bc ("HSI: Introduce OMAP SSI driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65319890c3 ]
Especially when CONFIG_LOCKDEP and other debug configs are enabled,
Perf can print the following warning when running the "kernel lock
contention analysis" test:
Warning:
Processed 1378918 events and lost 4 chunks!
Check IO/CPU overload!
Warning:
Processed 4593325 samples and lost 70.00%!
The test already supplies -q to run in quiet mode, so extend quiet mode
to perf_stdio__warning() and also ui__warning() for consistency.
This fixes the following failure due to the extra lines counted:
perf test "lock cont" -vvv
82: kernel lock contention analysis test :
--- start ---
test child forked, pid 3125
Testing perf lock record and perf lock contention
[Fail] Recorded result count is not 1: 9
test child finished with -1
---- end ----
kernel lock contention analysis test: FAILED!
Fixes: ec685de25b ("perf test: Add kernel lock contention test")
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221018094137.783081-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a943710407 ]
If an error occurs after a successful uvesafb_init_mtrr() call, it must be
undone by a corresponding arch_phys_wc_del() call, as already done in the
remove function.
This has been added in the remove function in commit 63e28a7a5f
("uvesafb: Clean up MTRR code")
Fixes: 8bdb3a2d7d ("uvesafb: the driver core")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35b4f4d4a7 ]
The uvesafb fbdev driver uses memory management information that is not
available on ARCH=um, so don't allow this driver to be built on UML.
Prevents these build errors:
../drivers/video/fbdev/uvesafb.c: In function ‘uvesafb_vbe_init’:
../drivers/video/fbdev/uvesafb.c:807:21: error: ‘__supported_pte_mask’ undeclared (first use in this function)
807 | if (__supported_pte_mask & _PAGE_NX) {
../drivers/video/fbdev/uvesafb.c:807:44: error: ‘_PAGE_NX’ undeclared (first use in this function)
807 | if (__supported_pte_mask & _PAGE_NX) {
Fixes: 68f5d3f3b6 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: linux-um@lists.infradead.org
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: Michal Januszewski <spock@gentoo.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 71c53e1922 ]
The geode fbdev driver uses struct cpuinfo fields that are not present
on ARCH=um, so don't allow this driver to be built on UML.
Prevents these build errors:
In file included from ../arch/x86/include/asm/olpc.h:7:0,
from ../drivers/mfd/cs5535-mfd.c:17:
../arch/x86/include/asm/geode.h: In function ‘is_geode_gx’:
../arch/x86/include/asm/geode.h:16:24: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:16:39: error: ‘X86_VENDOR_NSC’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:17:17: error: ‘struct cpuinfo_um’ has no member named ‘x86’
(boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:18:17: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
(boot_cpu_data.x86_model == 5));
../arch/x86/include/asm/geode.h: In function ‘is_geode_lx’:
../arch/x86/include/asm/geode.h:23:24: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:23:39: error: ‘X86_VENDOR_AMD’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:24:17: error: ‘struct cpuinfo_um’ has no member named ‘x86’
(boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:25:17: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
(boot_cpu_data.x86_model == 10));
Fixes: 68f5d3f3b6 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: linux-um@lists.infradead.org
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: Andres Salomon <dilinger@queued.net>
Cc: linux-geode@lists.infradead.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c84bf485a5 ]
The clk_disable_unprepare() should be called in the error handling
of register_framebuffer(), fix it.
Fixes: 0937a7b362 ("video: ep93xx: Prepare clock before using it")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 001f2cdb95 ]
pci_get_device() will increase the reference count for the returned
pci_dev. For the error path, we need to use pci_dev_put() to decrease
the reference count.
Fixes: dbe7e429fe ("vmlfb: framebuffer driver for Intel Vermilion Range")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 025e3b507a ]
Only a single out of three devices need a PWM, so from driver it's
optional. Moreover it's a single driver in the entire kernel that
currently selects PWM. Unfortunately this selection is a root cause
of the circular dependencies when we want to enable optional PWM
for some other drivers that select GPIOLIB.
Fixes: a2ed00da50 ("drivers/video: add support for the Solomon SSD1307 OLED Controller")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 608c6ed333 ]
When input some constructed invalid 'trigger' command, command info
in 'error_log' are lost [1].
The root cause is that there is a path that event_hist_trigger_parse()
is recursely called once and 'last_cmd' which save origin command is
cleared, then later calling of hist_err() will no longer record origin
command info:
event_hist_trigger_parse() {
last_cmd_set() // <1> 'last_cmd' save origin command here at first
create_actions() {
onmatch_create() {
action_create() {
trace_action_create() {
trace_action_create_field_var() {
create_field_var_hist() {
event_hist_trigger_parse() { // <2> recursely called once
hist_err_clear() // <3> 'last_cmd' is cleared here
}
hist_err() // <4> No longer find origin command!!!
Since 'glob' is empty string while running into the recurse call, we
can trickly check it and bypass the call of hist_err_clear() to solve it.
[1]
# cd /sys/kernel/tracing
# echo "my_synth_event int v1; int v2; int v3;" >> synthetic_events
# echo 'hist:keys=pid' >> events/sched/sched_waking/trigger
# echo "hist:keys=next_pid:onmatch(sched.sched_waking).my_synth_event(\
pid,pid1)" >> events/sched/sched_switch/trigger
# cat error_log
[ 8.405018] hist:sched:sched_switch: error: Couldn't find synthetic event
Command:
hist:keys=next_pid:onmatch(sched.sched_waking).my_synth_event(pid,pid1)
^
[ 8.816902] hist:sched:sched_switch: error: Couldn't find field
Command:
hist:keys=next_pid:onmatch(sched.sched_waking).my_synth_event(pid,pid1)
^
[ 8.816902] hist:sched:sched_switch: error: Couldn't parse field variable
Command:
hist:keys=next_pid:onmatch(sched.sched_waking).my_synth_event(pid,pid1)
^
[ 8.999880] : error: Couldn't find field
Command:
^
[ 8.999880] : error: Couldn't parse field variable
Command:
^
[ 8.999880] : error: Couldn't find field
Command:
^
[ 8.999880] : error: Couldn't create histogram for field
Command:
^
Link: https://lore.kernel.org/linux-trace-kernel/20221207135326.3483216-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <zanussi@kernel.org>
Fixes: f404da6e1d ("tracing: Add 'last error' error facility for hist triggers")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39244cc754 ]
When the driver does not check the data from the user, the variable
'data->block[0]' may be very large to cause an out-of-bounds bug.
The following log can reveal it:
[ 33.995542] i2c i2c-1: ioctl, cmd=0x720, arg=0x7ffcb3dc3a20
[ 33.995978] ismt_smbus 0000:00:05.0: I2C_SMBUS_BLOCK_DATA: WRITE
[ 33.996475] ==================================================================
[ 33.996995] BUG: KASAN: out-of-bounds in ismt_access.cold+0x374/0x214b
[ 33.997473] Read of size 18446744073709551615 at addr ffff88810efcfdb1 by task ismt_poc/485
[ 33.999450] Call Trace:
[ 34.001849] memcpy+0x20/0x60
[ 34.002077] ismt_access.cold+0x374/0x214b
[ 34.003382] __i2c_smbus_xfer+0x44f/0xfb0
[ 34.004007] i2c_smbus_xfer+0x10a/0x390
[ 34.004291] i2cdev_ioctl_smbus+0x2c8/0x710
[ 34.005196] i2cdev_ioctl+0x5ec/0x74c
Fix this bug by checking the size of 'data->block[0]' first.
Fixes: 13f35ac14c ("i2c: Adding support for Intel iSMT SMBus 2.0 host controller")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d47b79d2b ]
It will cause null-ptr-deref in resource_size(), if platform_get_resource()
returns NULL, move calling resource_size() after devm_ioremap_resource() that
will check 'res' to avoid null-ptr-deref.
And use devm_platform_get_and_ioremap_resource() to simplify code.
Fixes: b3fdd32799 ("i2c: mux: Add register-based mux i2c-mux-reg")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bdbbae241a ]
While any of the GPIO cdev syscalls is in progress, the kernel can call
gpiochip_remove() (for instance, when a USB GPIO expander is disconnected)
which will set gdev->chip to NULL after which any subsequent access will
cause a crash.
To avoid that: use an RW-semaphore in which the syscalls take it for
reading (so that we don't needlessly prohibit the user-space from calling
syscalls simultaneously) while gpiochip_remove() takes it for writing so
that it can only happen once all syscalls return.
Fixes: d7c51b47ac ("gpio: userspace ABI for reading/writing GPIO lines")
Fixes: 3c0d9c635a ("gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL")
Fixes: aad955842d ("gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and GPIO_V2_GET_LINEINFO_WATCH_IOCTL")
Fixes: a54756cb24 ("gpiolib: cdev: support GPIO_V2_LINE_SET_CONFIG_IOCTL")
Fixes: 7b8e00d981 ("gpiolib: cdev: support GPIO_V2_LINE_SET_VALUES_IOCTL")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
[Nick: fixed a build failure with CDEV_V1 disabled]
Co-authored-by: Nick Hainke <vincent@systemli.org>
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 533aae7c94 ]
There are several places where we can crash the kernel by requesting
lines, unbinding the GPIO device, then calling any of the system calls
relevant to the GPIO character device's annonymous file descriptors:
ioctl(), read(), poll().
While I observed it with the GPIO simulator, it will also happen for any
of the GPIO devices that can be hot-unplugged - for instance any HID GPIO
expander (e.g. CP2112).
This affects both v1 and v2 uAPI.
This fixes it partially by checking if gdev->chip is not NULL but it
doesn't entirely remedy the situation as we still have a race condition
in which another thread can remove the device after the check.
Fixes: d7c51b47ac ("gpio: userspace ABI for reading/writing GPIO lines")
Fixes: 3c0d9c635a ("gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL")
Fixes: aad955842d ("gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and GPIO_V2_GET_LINEINFO_WATCH_IOCTL")
Fixes: a54756cb24 ("gpiolib: cdev: support GPIO_V2_LINE_SET_CONFIG_IOCTL")
Fixes: 7b8e00d981 ("gpiolib: cdev: support GPIO_V2_LINE_SET_VALUES_IOCTL")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7bef797d70 ]
In fake_init(), __root_device_register() is possible to fail but it's
ignored, which can cause unregistering vme_root fail when exit.
general protection fault,
probably for non-canonical address 0xdffffc000000008c
KASAN: null-ptr-deref in range [0x0000000000000460-0x0000000000000467]
RIP: 0010:root_device_unregister+0x26/0x60
Call Trace:
<TASK>
__x64_sys_delete_module+0x34f/0x540
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Return error when __root_device_register() fails.
Fixes: 658bcdae9c ("vme: Adding Fake VME driver")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221205084805.147436-1-chenzhongjin@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
