[ Upstream commit cf58aefb1332db322060cad4a330d5f9292b0f41 ]
On RX, we shouldn't be incrementing the stats for an arbitrary SA in
case the actual SA hasn't been set up. Those counters are intended to
track packets for their respective AN when the SA isn't currently
configured. Due to the way MACsec is implemented, we don't keep
counters unless the SA is configured, so we can't track those packets,
and those counters will remain at 0.
The RXSC's stats keeps track of those packets without telling us which
AN they belonged to. We could add counters for non-existent SAs, and
then find a way to integrate them in the dump to userspace, but I
don't think it's worth the effort.
Fixes: 91ec9bd57f ("macsec: Fix traffic counters/statistics")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/f5ac92aaa5b89343232615f4c03f9f95042c6aa0.1728657709.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 637c4f6fe40befa04f19c38b5d15429cbb9191d9 ]
The left shift int 32 bit integer constants 1 is evaluated using 32 bit
arithmetic and then assigned to a 64 bit unsigned integer. In the case
where the shift is 32 or more this can lead to an overflow. Avoid this
by shifting using the BIT_ULL macro instead.
Fixes: 019aba04f08c ("octeontx2-af: Modify SMQ flush sequence to drop packets")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20241010154519.768785-1-colin.i.king@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1cff6ff302f5703a627f9ee1d99131161ea2683e ]
The Tegra MGBE driver sometimes fails to initialize, reporting the
following error, and as a result, it is unable to acquire an IP
address with DHCP:
tegra-mgbe 6800000.ethernet: timeout waiting for link to become ready
As per the recommendation from the Tegra hardware design team, fix this
issue by:
- clearing the PHY_RDY bit before setting the CDR_RESET bit and then
setting PHY_RDY bit before clearing CDR_RESET bit. This ensures valid
data is present at UPHY RX inputs before starting the CDR lock.
- adding the required delays when bringing up the UPHY lane. Note we
need to use delays here because there is no alternative, such as
polling, for these cases. Using the usleep_range() instead of ndelay()
as sleeping is preferred over busy wait loop.
Without this change we would see link failures on boot sometimes as
often as 1 in 5 boots. With this fix we have not observed any failures
in over 1000 boots.
Fixes: d8ca113724 ("net: stmmac: tegra: Add MGBE support")
Signed-off-by: Paritosh Dixit <paritoshd@nvidia.com>
Link: https://patch.msgid.link/20241010142908.602712-1-paritoshd@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da1642bc97c4ef67f347edcd493bd0a52f88777b ]
send_message() does not block in the MBOX implementation. This is
because the mailbox layer has its own queue. However, this confuses
the per xfer timeouts as they all start their timeout ticks in
parallel.
Consider a case where the xfer timeout is 30ms and a SCMI transaction
takes 25ms:
| 0ms: Message #0 is queued in mailbox layer and sent out, then sits
| at scmi_wait_for_message_response() with a timeout of 30ms
| 1ms: Message #1 is queued in mailbox layer but not sent out yet.
| Since send_message() doesn't block, it also sits at
| scmi_wait_for_message_response() with a timeout of 30ms
| ...
| 25ms: Message #0 is completed, txdone is called and message #1 is sent
| 31ms: Message #1 times out since the count started at 1ms. Even though
| it has only been inflight for 6ms.
Fixes: 5c8a47a5a9 ("firmware: arm_scmi: Make scmi core independent of the transport type")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Message-Id: <20241014160717.1678953-1-justin.chen@broadcom.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 293f53263266bc4340d777268ab4328a97f041fa ]
If the allocation in msm_disp_state_dump_regs() failed then
`block->state` can be NULL. The msm_disp_state_print_regs() function
_does_ have code to try to handle it with:
if (*reg)
dump_addr = *reg;
...but since "dump_addr" is initialized to NULL the above is actually
a noop. The code then goes on to dereference `dump_addr`.
Make the function print "Registers not stored" when it sees a NULL to
solve this. Since we're touching the code, fix
msm_disp_state_print_regs() not to pointlessly take a double-pointer
and properly mark the pointer as `const`.
Fixes: 98659487b8 ("drm/msm: add support to take dpu snapshot")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/619657/
Link: https://lore.kernel.org/r/20241014093605.1.Ia1217cecec9ef09eb3c6d125360cc6c8574b0e73@changeid
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc5006cfcf62bea88076a587344ba5e00e66d1c6 ]
GID table length is reported by FW. The gid index which is passed to the
driver during modify_qp/create_ah is restricted by the sgid_index field of
struct ib_global_route. sgid_index is u8 and the max sgid possible is
256.
Each GID entry in HW will have 2 GID entries in the kernel gid table. So
we can support twice the gid table size reported by FW. Also, restrict the
max GID to 256 also.
Fixes: 847b97887e ("RDMA/bnxt_re: Restrict the max_gids to 256")
Link: https://patch.msgid.link/r/1728373302-19530-11-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7988bdbbb85ac85a847baf09879edcd0f70521dc ]
Avoid memory corruption while setting up Level-2 PBL pages for the non MR
resources when num_pages > 256K.
There will be a single PDE page address (contiguous pages in the case of >
PAGE_SIZE), but, current logic assumes multiple pages, leading to invalid
memory access after 256K PBL entries in the PDE.
Fixes: 0c4dcd6028 ("RDMA/bnxt_re: Refactor hardware queue memory allocation")
Link: https://patch.msgid.link/r/1728373302-19530-10-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9e6e7443922ac0a48243c35d03834c96926bff1 ]
Driver exports pacing stats only on GenP5 and P7 adapters. But while
parsing the pacing stats, driver has a check for "rdev->dbr_pacing". This
caused a trace when KASAN is enabled.
BUG: KASAN: slab-out-of-bounds in bnxt_re_get_hw_stats+0x2b6a/0x2e00 [bnxt_re]
Write of size 8 at addr ffff8885942a6340 by task modprobe/4809
Fixes: 8b6573ff34 ("bnxt_re: Update the debug counters for doorbell pacing")
Link: https://patch.msgid.link/r/1728373302-19530-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1801d87b3598b173bce3fbf15c5517796f38db96 ]
Add basic support for 5760X P7 devices. Add new chip
revisions. The first version support is similar to
the existing P5 adapters. Extend the current support
for P5 adapters to P7 also.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1701946060-13931-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Stable-dep-of: ac6df53738b4 ("RDMA/bnxt_re: Fix the max CQ WQEs for older adapters")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22600596b6756b166fd052d5facb66287e6f0bad ]
After commit 8d7017fd62 ("blackhole_netdev: use blackhole_netdev to
invalidate dst entries"), blackhole_netdev was introduced to invalidate
dst cache entries on the TX path whenever the cache times out or is
flushed.
When two UDP sockets (sk1 and sk2) send messages to the same destination
simultaneously, they are using the same dst cache. If the dst cache is
invalidated on one path (sk2) while the other (sk1) is still transmitting,
sk1 may try to use the invalid dst entry.
CPU1 CPU2
udp_sendmsg(sk1) udp_sendmsg(sk2)
udp_send_skb()
ip_output()
<--- dst timeout or flushed
dst_dev_put()
ip_finish_output2()
ip_neigh_for_gw()
This results in a scenario where ip_neigh_for_gw() returns -EINVAL because
blackhole_dev lacks an in_dev, which is needed to initialize the neigh in
arp_constructor(). This error is then propagated back to userspace,
breaking the UDP application.
The patch fixes this issue by assigning an in_dev to blackhole_dev for
IPv4, similar to what was done for IPv6 in commit e5f80fcf86 ("ipv6:
give an IPv6 dev to blackhole_netdev"). This ensures that even when the
dst entry is invalidated with blackhole_dev, it will not fail to create
the neigh entry.
As devinet_init() is called ealier than blackhole_netdev_init() in system
booting, it can not assign the in_dev to blackhole_dev in devinet_init().
As Paolo suggested, add a separate late_initcall() in devinet.c to ensure
inet_blackhole_dev_init() is called after blackhole_netdev_init().
Fixes: 8d7017fd62 ("blackhole_netdev: use blackhole_netdev to invalidate dst entries")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/3000792d45ca44e16c785ebe2b092e610e5b3df1.1728499633.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c659b405b82ead335bee6eb33f9691bf718e21e8 ]
ip_dev_find() always returns real net_device address, whether traffic is
running on a vlan or real device, if traffic is over vlan, filling
endpoint struture with real ndev and an attempt to send a connect request
will results in RDMA_CM_EVENT_UNREACHABLE error. This patch fixes the
issue by using vlan_dev_real_dev().
Fixes: 830662f6f0 ("RDMA/cxgb4: Add support for active and passive open connection with IPv6 address")
Link: https://patch.msgid.link/r/20241007132311.70593-1-anumula@chelsio.com
Signed-off-by: Anumula Murali Mohan Reddy <anumula@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9bd4a82b4ed32c6d1c90500a52063e6e341517f ]
If snd_hda_gen_add_kctl fails to allocate memory and returns NULL, then
NULL pointer dereference will occur in the next line.
Since dolphin_fixups function is a hda_fixup function which is not supposed
to return any errors, add simple check before dereference, ignore the fail.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 20e5077241 ("ALSA: hda/cs8409: Add support for dolphin")
Signed-off-by: Murad Masimov <m.masimov@maxima.ru>
Link: https://patch.msgid.link/20241010221649.1305-1-m.masimov@maxima.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73ab05aa46b02d96509cb029a8d04fca7bbde8c7 ]
With KASAN and PREEMPT_RT enabled, calling task_work_add() in
task_tick_mm_cid() may cause the following splat.
[ 63.696416] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
[ 63.696416] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 610, name: modprobe
[ 63.696416] preempt_count: 10001, expected: 0
[ 63.696416] RCU nest depth: 1, expected: 1
This problem is caused by the following call trace.
sched_tick() [ acquire rq->__lock ]
-> task_tick_mm_cid()
-> task_work_add()
-> __kasan_record_aux_stack()
-> kasan_save_stack()
-> stack_depot_save_flags()
-> alloc_pages_mpol_noprof()
-> __alloc_pages_noprof()
-> get_page_from_freelist()
-> rmqueue()
-> rmqueue_pcplist()
-> __rmqueue_pcplist()
-> rmqueue_bulk()
-> rt_spin_lock()
The rq lock is a raw_spinlock_t. We can't sleep while holding
it. IOW, we can't call alloc_pages() in stack_depot_save_flags().
The task_tick_mm_cid() function with its task_work_add() call was
introduced by commit 223baf9d17 ("sched: Fix performance regression
introduced by mm_cid") in v6.4 kernel.
Fortunately, there is a kasan_record_aux_stack_noalloc() variant that
calls stack_depot_save_flags() while not allowing it to allocate
new pages. To allow task_tick_mm_cid() to use task_work without
page allocation, a new TWAF_NO_ALLOC flag is added to enable calling
kasan_record_aux_stack_noalloc() instead of kasan_record_aux_stack()
if set. The task_tick_mm_cid() function is modified to add this new flag.
The possible downside is the missing stack trace in a KASAN report due
to new page allocation required when task_work_add_noallloc() is called
which should be rare.
Fixes: 223baf9d17 ("sched: Fix performance regression introduced by mm_cid")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241010014432.194742-1-longman@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 466e4d801cd438a1ab2c8a2cce1bef6b65c31bbb ]
Adding task_work from NMI context requires the following:
- The kasan_record_aux_stack() is not NMU safe and must be avoided.
- Using TWA_RESUME is NMI safe. If the NMI occurs while the CPU is in
userland then it will continue in userland and not invoke the `work'
callback.
Add TWA_NMI_CURRENT as an additional notify mode. In this mode skip
kasan and use irq_work in hardirq-mode to for needed interrupt. Set
TIF_NOTIFY_RESUME within the irq_work callback due to k[ac]san
instrumentation in test_and_set_bit() which does not look NMI safe in
case of a report.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240704170424.1466941-3-bigeasy@linutronix.de
Stable-dep-of: 73ab05aa46b0 ("sched/core: Disable page allocation in task_tick_mm_cid()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd526e121c4d6f71aed82d21a8b8277b03e60b43 ]
Linking of urandom_read and liburandom_read.so prefers LLVM's 'ld.lld' but
falls back to using 'ld' if unsupported. However, this fallback discards
any existing makefile macro for LD and can break cross-compilation.
Fix by changing the fallback to use the target linker $(LD), passed via
'-fuse-ld=' using an absolute path rather than a linker "flavour".
Fixes: 08c79c9cd6 ("selftests/bpf: Don't force lld on non-x86 architectures")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241009040720.635260-1-tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6cb86a0fdece87e126323ec1bb19deb16a52aedf ]
The verifier contains a cache for looking up module BTF objects when
calling kfuncs defined in modules. This cache uses a 'struct
bpf_kfunc_btf_tab', which contains a sorted list of BTF objects that
were already seen in the current verifier run, and the BTF objects are
looked up by the offset stored in the relocated call instruction using
bsearch().
The first time a given offset is seen, the module BTF is loaded from the
file descriptor passed in by libbpf, and stored into the cache. However,
there's a bug in the code storing the new entry: it stores a pointer to
the new cache entry, then calls sort() to keep the cache sorted for the
next lookup using bsearch(), and then returns the entry that was just
stored through the stored pointer. However, because sort() modifies the
list of entries in place *by value*, the stored pointer may no longer
point to the right entry, in which case the wrong BTF object will be
returned.
The end result of this is an intermittent bug where, if a BPF program
calls two functions with the same signature in two different modules,
the function from the wrong module may sometimes end up being called.
Whether this happens depends on the order of the calls in the BPF
program (as that affects whether sort() reorders the array of BTF
objects), making it especially hard to track down. Simon, credited as
reporter below, spent significant effort analysing and creating a
reproducer for this issue. The reproducer is added as a selftest in a
subsequent patch.
The fix is straight forward: simply don't use the stored pointer after
calling sort(). Since we already have an on-stack pointer to the BTF
object itself at the point where the function return, just use that, and
populate it from the cache entry in the branch where the lookup
succeeds.
Fixes: 2357672c54 ("bpf: Introduce BPF support for kernel module function calls")
Reported-by: Simon Sundberg <simon.sundberg@kau.se>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20241010-fix-kfunc-btf-caching-for-modules-v2-1-745af6c1af98@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3cd03ea57e8e16cc78cc357d5e9f26078426f236 ]
The Linux implementation of PCI error recovery for s390 was based on the
understanding that firmware error recovery is a two step process with an
optional initial error event to indicate the cause of the error if known
followed by either error event 0x3A (Success) or 0x3B (Failure) to
indicate whether firmware was able to recover. While this has been the
case in testing and the error cases seen in the wild it turns out this
is not correct. Instead firmware only generates 0x3A for some error and
service scenarios and expects the OS to perform recovery for all PCI
events codes except for those indicating permanent error (0x3B, 0x40)
and those indicating errors on the function measurement block (0x2A,
0x2B, 0x2C). Align Linux behavior with these expectations.
Fixes: 4cdf2f4e24 ("s390/pci: implement minimal PCI error recovery")
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d74179708473c649c653f1db280e29875a532e99 ]
Now that we get cookies for perf_event probes, adding tests
for cookie for kprobe/uprobe/tracepoint.
The perf_event test needs to be added completely and is coming
in following change.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240119110505.400573-6-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: 4538a38f654a ("selftests/bpf: fix perf_event link info name_len assertion")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1703612885723869064f18e8816c6f3f87987748 ]
The fill_link_info test keeps skeleton open and just creates
various links. We are wrongly calling bpf_link__detach after
each test to close them, we need to call bpf_link__destroy.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/bpf/20231125193130.834322-5-jolsa@kernel.org
Stable-dep-of: 4538a38f654a ("selftests/bpf: fix perf_event link info name_len assertion")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4deecdd29cf29844c7bd164d72dc38d2e672f64e ]
Previously when retrieving `bpf_link_info.perf_event` for
kprobe/uprobe/tracepoint, the `name_len` field was not populated by the
kernel, leaving it to reflect the value initially set by the user. This
behavior was inconsistent with how other input/output string buffer
fields function (e.g. `raw_tracepoint.tp_name_len`).
This patch fills `name_len` with the actual size of the string name.
Fixes: 1b715e1b0e ("bpf: Support ->fill_link_info for perf_event")
Signed-off-by: Tyrone Wu <wudevelops@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20241008164312.46269-1-wudevelops@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5c16492c66fbfca85f36e42363d32212df5927b ]
At the moment we don't store cookie for perf_event probes,
while we do that for the rest of the probes.
Adding cookie fields to struct bpf_link_info perf event
probe records:
perf_event.uprobe
perf_event.kprobe
perf_event.tracepoint
perf_event.perf_event
And the code to store that in bpf_link_info struct.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20240119110505.400573-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: 4deecdd29cf2 ("bpf: fix unpopulated name_len field in perf_event link info")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3acf8ace68230e9558cf916847f1cc9f208abdf1 ]
Add missed value to kprobe attached through perf link info to
hold the stats of missed kprobe handler execution.
The kprobe's missed counter gets incremented when kprobe handler
is not executed due to another kprobe running on the same cpu.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230920213145.1941596-4-jolsa@kernel.org
Stable-dep-of: 4deecdd29cf2 ("bpf: fix unpopulated name_len field in perf_event link info")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b5648416e47933939dc310c4ea1e29404f35630 ]
The resctrl schemata file supports specifying memory bandwidth associated with
the Memory Bandwidth Allocation (MBA) feature via a percentage (this is the
default) or bandwidth in MiBps (when resctrl is mounted with the "mba_MBps"
option).
The allowed range for the bandwidth percentage is from
/sys/fs/resctrl/info/MB/min_bandwidth to 100, using a granularity of
/sys/fs/resctrl/info/MB/bandwidth_gran. The supported range for the MiBps
bandwidth is 0 to U32_MAX.
There are two issues with parsing of MiBps memory bandwidth:
* The user provided MiBps is mistakenly rounded up to the granularity
that is unique to percentage input.
* The user provided MiBps is parsed using unsigned long (thus accepting
values up to ULONG_MAX), and then assigned to u32 that could result in
overflow.
Do not round up the MiBps value and parse user provided bandwidth as the u32
it is intended to be. Use the appropriate kstrtou32() that can detect out of
range values.
Fixes: 8205a078ba ("x86/intel_rdt/mba_sc: Add schemata support")
Fixes: 6ce1560d35 ("x86/resctrl: Switch over to the resctrl mbps_val list")
Co-developed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Martin Kletzander <nert.pinx@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5069d7e202f640a36cf213a432296c85113a52f7 ]
If traffic is over vlan, cma_validate_port() fails to match vlan
net_device ifindex with bound_if_index and results in ENODEV error.
It is because rdma_copy_src_l2_addr() always assigns bound_if_index with
real net_device ifindex.
This patch fixes the issue by assigning bound_if_index with vlan
net_device index if traffic is over vlan.
Fixes: f8ef1be816 ("RDMA/cma: Avoid GID lookups on iWARP devices")
Signed-off-by: Anumula Murali Mohan Reddy <anumula@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Link: https://patch.msgid.link/20241008114334.146702-1-anumula@chelsio.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
