[ Upstream commit e79634b53e398966c49f803c49701bc74dc3ccf8 ]
The scope of the "extra device ports" configuration is not made clear by
the CMN documentation - so far we've assumed it applies globally, based
on the sole example which suggests as much. However it transpires that
this is incorrect, and the format does in fact vary based on each
individual XP's port configuration. As a consequence, we're currenly
liable to decode the port/device indices from a node ID incorrectly,
thus program the wrong event source in the DTM leading to bogus event
counts, and also show device topology on the wrong ports in debugfs.
To put this right, rework node IDs yet again to carry around the
additional data necessary to decode them properly per-XP. At this point
the notion of fully decomposing an ID becomes more impractical than it's
worth, so unabstracting the XY mesh coordinates (where 2/3 users were
just debug anyway) ends up leaving things a bit simpler overall.
Fixes: 60d1504070 ("perf/arm-cmn: Support new IP features")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/5195f990152fc37adba5fbf5929a6b11063d9f09.1725296395.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1083ee717e9bde012268782e084d343314490a4 ]
The debugfs pretty-printer was written for the CMN-600 assumptions of a
maximum 8x8 mesh, but CMN-700 now allows coordinates and ID values up to
12 and 128 respectively, which can overflow the format strings, mess up
the alignment of the table and hurt overall readability. This table does
prove useful for double-checking that the driver is picking up the
topology of new systems correctly and for verifying user expectations,
so tweak the formatting to stay nice and readable with wider values.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/1d1517eadd1bac5992fab679c9dc531b381944da.1702484646.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Stable-dep-of: e79634b53e39 ("perf/arm-cmn: Refactor node ID handling. Again.")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7633ec2c262fab3e7c5bf3cd3876b5748f584a57 ]
The bitmap-based scheme for tracking DTC counter usage turns out to be a
complete dead-end for its imagined purpose, since by the time we have to
keep track of a per-DTC counter index anyway, we already have enough
information to make the bitmap itself redundant. Revert the remains of
it back to almost the original scheme, but now expanded to track per-DTC
indices, in preparation for making use of them in anger.
Note that since cycle count events always use a dedicated counter on a
single DTC, we reuse the field to encode their DTC index directly.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/5f6ade76b47f033836d7a36c03555da896dfb4a3.1697824215.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Stable-dep-of: e79634b53e39 ("perf/arm-cmn: Refactor node ID handling. Again.")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15d8605c0cf4fc9cf4386cae658c68a0fd4bdb92 ]
Mutex is held when adding an element, no need for READ_ONCE, remove it.
Fixes: 123b99619c ("netfilter: nf_tables: honor set timeout and garbage collection updates")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0f38a8c60174368aed1d0f9965d733195f15033 ]
Report ERANGE to userspace if user specifies an expiration larger than
the timeout.
Fixes: 8e1102d5a1 ("netfilter: nf_tables: support timeouts larger than 23 days")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d2dc429ecb4e79ad164028d965c00f689e6f6d06 ]
If element timeout is unset and set provides no default timeout, the
element expiration is silently ignored, reject this instead to let user
know this is unsupported.
Also prepare for supporting timeout that never expire, where zero
timeout and expiration must be also rejected.
Fixes: 8e1102d5a1 ("netfilter: nf_tables: support timeouts larger than 23 days")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0c47281723f301894c14e6f5cd5884fdfb813f9 ]
Element timeout that is below CONFIG_HZ never expires because the
timeout extension is not allocated given that nf_msecs_to_jiffies64()
returns 0. Set timeout to the minimum value to honor timeout.
Fixes: 8e1102d5a1 ("netfilter: nf_tables: support timeouts larger than 23 days")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60949b7b805424f21326b450ca4f1806c06d982e ]
MASK_VAL() was added as a way to handle bit_offset and bit_width for
registers located in system memory address space. However, while suited
for reading, it does not work for writing and result in corrupted
registers when writing values with bit_offset > 0. Moreover, when a
register is collocated with another one at the same address but with a
different mask, the current code results in the other registers being
overwritten with 0s. The write procedure for SYSTEM_MEMORY registers
should actually read the value, mask it, update it and write it with the
updated value. Moreover, since registers can be located in the same
word, we must take care of locking the access before doing it. We should
potentially use a global lock since we don't know in if register
addresses aren't shared with another _CPC package but better not
encourage vendors to do so. Assume that registers can use the same word
inside a _CPC package and thus, use a per _CPC package lock.
Fixes: 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses")
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Link: https://patch.msgid.link/20240826101648.95654-1-cleger@rivosinc.com
[ rjw: Dropped redundant semicolon ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f0315330af7a57c1c00587fdfb69c7778bf1c50 ]
The test case for SME vector length changes via sigreturn use a bit too
much cut'n'paste and only actually changed the SVE vector length in the
test itself. Andre's recent factoring out of the initialisation code caused
this to be exposed and the test to start failing. Fix the test to actually
cover the thing it's supposed to test.
Fixes: 4963aeb35a ("kselftest/arm64: signal: Add SME signal handling tests")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20240829-arm64-sme-signal-vl-change-test-v1-1-42d7534cb818@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit daecd3373a16a039ad241086e30a1ec46fc9d61f ]
Currently we set the period and record it as the initial value of the
counter without checking it's set to the hardware successfully or not.
However the counter maybe unwritable if the target event is unsupported
by the device. In such case we will pass user a wrong count:
[start counts when setting the period]
hwc->prev_count = 0x8000000000000000
device.counter_value = 0 // the counter is not set as the period
[when user reads the counter]
event->count = device.counter_value - hwc->prev_count
= 0x8000000000000000 // wrong. should be 0.
Fix this by record the hardware counter counts correctly when setting
the period.
Fixes: 8404b0fbc7 ("drivers/perf: hisi: Add driver for HiSilicon PCIe PMU")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240829090332.28756-2-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24cc57d8faaa4060fd58adf810b858fcfb71a02f ]
In the case where we are forcing the ps.chunk_size to be at least 1,
we are ignoring the caller's alignment.
Move the forcing of ps.chunk_size to be at least 1 before rounding it
up to caller's alignment, so that caller's alignment is honored.
While at it, use max() to force the ps.chunk_size to be at least 1 to
improve readability.
Fixes: 6d45e1c948a8 ("padata: Fix possible divide-by-0 panic in padata_mt_helper()")
Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c82c507126c9c9db350be28f14c83fad1c7969ae ]
ACPICA commit 129b75516fc49fe1fd6b8c5798f86c13854630b3
Stop nagging user about every Stall() that violates the spec
On my Dell XPS 15 7590 I get hundreds of these warnings after few hours of
uptime:
$ dmesg | grep "fix the firmware" | wc -l
261
I cannot fix the firmware and I doubt that Dell cares about 4 year old
laptop either
Fixes: ace8f1c54a ("ACPICA: executer/exsystem: Inform users about ACPI spec violation")
Link: https://github.com/acpica/acpica/commit/129b7551
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 632b746b108e3c62e0795072d00ed597371c738a ]
ACPICA commit 2ad4e6e7c4118f4cdfcad321c930b836cec77406
In some cases it is not practical nor useful to nag user about some
firmware errors that they cannot fix. Add a macro that will print a
warning or error only once to be used in these cases.
Link: https://github.com/acpica/acpica/commit/2ad4e6e7
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: c82c507126c9 ("ACPICA: executer/exsystem: Don't nag user about every Stall() violating the spec")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5225b6562b9a7dc808d5a1e465aaf5e2ebb220cd ]
Currently a number of SVE/SME related tests have almost identical
functions to enumerate all supported vector lengths. However over time
the copy&pasted code has diverged, allowing some bugs to creep in:
- fake_sigreturn_sme_change_vl reports a failure, not a SKIP if only
one vector length is supported (but the SVE version is fine)
- fake_sigreturn_sme_change_vl tries to set the SVE vector length, not
the SME one (but the other SME tests are fine)
- za_no_regs keeps iterating forever if only one vector length is
supported (but za_regs is correct)
Since those bugs seem to be mostly copy&paste ones, let's consolidate
the enumeration loop into one shared function, and just call that from
each test. That should fix the above bugs, and prevent similar issues
from happening again.
Fixes: 4963aeb35a ("kselftest/arm64: signal: Add SME signal handling tests")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240821164401.3598545-1-andre.przywara@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7db82f18c ]
The current signal handling tests for SME do not account for the fact that
unlike SVE all SME vector lengths are optional so we can't guarantee that
we will encounter the minimum possible VL, they will hang enumerating VLs
on such systems. Abort enumeration when we find the lowest VL in the newly
added ssve_za_regs test.
Fixes: bc69da5ff0 ("kselftest/arm64: Verify simultaneous SSVE and ZA context generation")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230131-arm64-kselftest-sig-sme-no-128-v1-2-d47c13dc8e1e@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Stable-dep-of: 5225b6562b9a ("kselftest/arm64: signal: fix/refactor SVE vector length enumeration")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a884f7970e ]
The signal Makefile rules pass all the dependencies for each executable,
including headers, to the compiler which GCC is happy enough with but
clang rejects:
clang --target=aarch64-none-linux-gnu -fintegrated-as -Wall -O2 -g -I/home/broonie/git/linux/tools/testing/selftests/ -isystem /home/broonie/git/linux/usr/include -D_GNU_SOURCE -std=gnu99 -I. test_signals.c test_signals_utils.c testcases/testcases.c signals.S testcases/fake_sigreturn_bad_magic.c test_signals.h test_signals_utils.h testcases/testcases.h -o testcases/fake_sigreturn_bad_magic
clang: error: cannot specify -o when generating multiple output files
This happens because clang gets confused about what to do with the
header files, failing to identify them as source. This is not amazing
behaviour on clang's part and should ideally be fixed but even if that
happens we'd still need a new clang release so let's instead rework the
Makefile so we use variables for the lists of header and source files,
allowing us to only pass the source files to the compiler and keep clang
happy.
As a bonus the resulting Makefile is a bit easier to read.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230111-arm64-kselftest-clang-v1-3-89c69d377727@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Stable-dep-of: 5225b6562b9a ("kselftest/arm64: signal: fix/refactor SVE vector length enumeration")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4bcda1eaf184e308f07f9c61d3a535f9ce477ce8 ]
If no page could be allocated, an error pointer was used as format
string in pr_warn.
Rearrange the code to return early in case of OOM. Also add a check
for the return value of d_path.
Fixes: f8b92ba67c ("mount: Add mount warning for impending timestamp expiry")
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Link: https://lore.kernel.org/r/20240730085856.32385-1-olaf@aepfle.de
[brauner: rewrite commit and commit message]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 74e60b8b2f ]
Use %ptTd instead of open-coded variant to print contents
of time64_t type in human readable form.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Stable-dep-of: 4bcda1eaf184 ("mount: handle OOM on mnt_warn_timestamp_expiry")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b7b282e6baea06ba65b55ae7d38326ceb79cebf ]
When forwarding SBI calls to userspace ensure sbiret.error is
initialized to SBI_ERR_NOT_SUPPORTED first, in case userspace
neglects to set it to anything. If userspace neglects it then we
can't be sure it did anything else either, so we just report it
didn't do or try anything. Just init sbiret.value to zero, which is
the preferred value to return when nothing special is specified.
KVM was already initializing both sbiret.error and sbiret.value, but
the values used appear to come from a copy+paste of the __sbi_ecall()
implementation, i.e. a0 and a1, which don't apply prior to the call
being executed, nor at all when forwarding to userspace.
Fixes: dea8ee31a0 ("RISC-V: KVM: Add SBI v0.1 support")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240807154943.150540-2-ajones@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77c977327dfaa9ae2e154964cdb89ceb5c7b7cf1 ]
In 'rtw_coex_action_bt_a2dp_pan', 'wl_cpt_test' and 'bt_cpt_test' are
hardcoded to false, so corresponding 'table_case' and 'tdma_case'
assignments are never met.
Also 'rtw_coex_set_rf_para(rtwdev, chip->wl_rf_para_rx[1])' is never
executed. Assuming that CPT was never fully implemented, remove
lookalike leftovers. Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 76f631cb40 ("rtw88: coex: update the mechanism for A2DP + PAN")
Signed-off-by: Dmitry Kandybka <d.kandybka@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240809085310.10512-1-d.kandybka@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c70f3163681381c15686bdd2fe56bf4af9b8aaaa ]
Reference and PTP clocks rate of the Loongson GMAC devices is 125MHz.
(So is in the GNET devices which support is about to be added.) Set
the respective plat_stmmacenet_data field up in accordance with that
so to have the coalesce command and timestamping work correctly.
Fixes: 30bba69d7d ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Yinggang Gu <guyinggang@loongson.cn>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6ffe7f0184792c2f99aca6ae5b916683973d7d3 ]
We should not be checking the return values from debugfs creation at all: the
debugfs functions are designed to handle errors of previously called functions
and just transparently abort the creation of debugfs entries when debugfs is
disabled. If we check the return value and abort driver initialisation, we break
the driver if debugfs is disabled (such as when booting with debugfs=off).
Earlier versions of ath9k accidentally did the right thing by checking the
return value, but only for NULL, not for IS_ERR(). This was "fixed" by the two
commits referenced below, breaking ath9k with debugfs=off starting from the 6.6
kernel (as reported in the Bugzilla linked below).
Restore functionality by just getting rid of the return value check entirely.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219122
Fixes: 1e4134610d ("wifi: ath9k: use IS_ERR() with debugfs_create_dir()")
Fixes: 6edb4ba6fb ("wifi: ath9k: fix parameter check in ath9k_init_debug()")
Reported-by: Daniel Tobias <dan.g.tob@gmail.com>
Tested-by: Daniel Tobias <dan.g.tob@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240805110225.19690-1-toke@toke.dk
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab9a244c396aae4aaa34b2399b82fc15ec2df8c1 ]
Commit c055e3eae0 ("crypto: xor - use ktime for template benchmarking")
switched from using jiffies to ktime-based performance benchmarking.
This works nicely on machines which have a fine-grained ktime()
clocksource as e.g. x86 machines with TSC.
But other machines, e.g. my 4-way HP PARISC server, don't have such
fine-grained clocksources, which is why it seems that 800 xor loops
take zero seconds, which then shows up in the logs as:
xor: measuring software checksum speed
8regs : -1018167296 MB/sec
8regs_prefetch : -1018167296 MB/sec
32regs : -1018167296 MB/sec
32regs_prefetch : -1018167296 MB/sec
Fix this with some small modifications to the existing code to improve
the algorithm to always produce correct results without introducing
major delays for architectures with a fine-grained ktime()
clocksource:
a) Delay start of the timing until ktime() just advanced. On machines
with a fast ktime() this should be just one additional ktime() call.
b) Count the number of loops. Run at minimum 800 loops and finish
earliest when the ktime() counter has progressed.
With that the throughput can now be calculated more accurately under all
conditions.
Fixes: c055e3eae0 ("crypto: xor - use ktime for template benchmarking")
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: John David Anglin <dave.anglin@bell.net>
v2:
- clean up coding style (noticed & suggested by Herbert Xu)
- rephrased & fixed typo in commit message
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35e6dbfe1846caeafabb49b7575adb36b0aa2269 ]
The Zynq UltraScale+ MPSoC DDR has a disjoint memory from 2GB to 32GB.
The DDR host interface has a contiguous memory so while injecting
errors, the driver should remove the hole else the injection fails as
the address translation is incorrect.
Introduce a get_mem_info() function pointer and set it for Zynq
UltraScale+ platform to return host address.
Fixes: 1a81361f75 ("EDAC, synopsys: Add Error Injection support for ZynqMP DDR controller")
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240711100656.31376-1-shubhrajyoti.datta@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 591c946675d88dcc0ae9ff54be9d5caaee8ce1e3 ]
The race condition around the ECCCLR register access happens in the IRQ
disable method called in the device remove() procedure and in the ECC IRQ
handler:
1. Enable IRQ:
a. ECCCLR = EN_CE | EN_UE
2. Disable IRQ:
a. ECCCLR = 0
3. IRQ handler:
a. ECCCLR = CLR_CE | CLR_CE_CNT | CLR_CE | CLR_CE_CNT
b. ECCCLR = 0
c. ECCCLR = EN_CE | EN_UE
So if the IRQ disabling procedure is called concurrently with the IRQ
handler method the IRQ might be actually left enabled due to the
statement 3c.
The root cause of the problem is that ECCCLR register (which since
v3.10a has been called as ECCCTL) has intermixed ECC status data clear
flags and the IRQ enable/disable flags. Thus the IRQ disabling (clear EN
flags) and handling (write 1 to clear ECC status data) procedures must
be serialised around the ECCCTL register modification to prevent the
race.
So fix the problem described above by adding the spin-lock around the
ECCCLR modifications and preventing the IRQ-handler from modifying the
IRQs enable flags (there is no point in disabling the IRQ and then
re-enabling it again within a single IRQ handler call, see the
statements 3a/3b and 3c above).
Fixes: f7824ded41 ("EDAC/synopsys: Add support for version 3 of the Synopsys EDAC DDR")
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240222181324.28242-2-fancer.lancer@gmail.com
Stable-dep-of: 35e6dbfe1846 ("EDAC/synopsys: Fix error injection on Zynq UltraScale+")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix build error for !CEC_CORE:
drivers/media/i2c/rk628/rk628_hdmirx.c:1235:17: error: implicit declaration of function 'cec_transmit_attempt_done' [-Werror=implicit-function-declaration]
drivers/media/i2c/rk628/rk628_hdmirx.c:1239:17: error: implicit declaration of function 'cec_received_msg' [-Werror=implicit-function-declaration]
drivers/media/i2c/rk628/rk628_hdmirx.c:1252:9: error: implicit declaration of function 'cec_queue_pin_hpd_event' [-Werror=implicit-function-declaration]
drivers/media/i2c/rk628/rk628_hdmirx.c:1284:21: error: implicit declaration of function 'cec_allocate_adapter'; did you mean 'cec_delete_adapter'? [-Werror=implicit-function-declaration]
drivers/media/i2c/rk628/rk628_hdmirx.c:1284:19: error: assignment to 'struct cec_adapter *' from 'int' makes pointer from integer without a cast [-Werror=int-conversion]
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
Change-Id: Ib395ed380926d93121ba233b1ce5ce273024de36
drivers/spi/spi-rockchip-flexbus-spi.c:367:12: error: 'rk_flexbus_spi_resume' defined but not used [-Werror=unused-function]
Change-Id: I1a8cf00bc51260501847f9797001bf4e10243240
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
drivers/input/touchscreen/parade/pt_core.c:10591:28: error: 'pt_core_rt_suspend' undeclared here (not in a function)
drivers/input/touchscreen/parade/pt_core.c:10591:48: error: 'pt_core_rt_resume' undeclared here (not in a function)
drivers/input/touchscreen/parade/pt_core.c:17046:28: error: 'pt_core_ebc_resume' undeclared (first use in this function)
drivers/input/touchscreen/parade/pt_core.c:17047:29: error: 'pt_core_ebc_suspend' undeclared (first use in this function); did you mean 'pt_early_suspend'?
Change-Id: Id9594b26941f80d16d13195cf0d8c0e9d5187f9b
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
drivers/input/touchscreen/focaltech_touch_ft5726/focaltech_core.c:2096:12: error: 'fts_core_pm_resume' defined but not used [-Werror=unused-function]
drivers/input/touchscreen/focaltech_touch_ft5726/focaltech_core.c:2081:12: error: 'fts_core_pm_suspend' defined but not used [-Werror=unused-function]
Change-Id: Iad119c9a603205e7fd393e28a5c4aff512f57603
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
drivers/input/touchscreen/cyttsp5/cyttsp5_core.c:6212:28: error: 'cyttsp5_core_late_resume' undeclared (first use in this function); did you mean 'cyttsp5_core_rt_resume'?
drivers/input/touchscreen/cyttsp5/cyttsp5_core.c:6213:29: error: 'cyttsp5_core_early_suspend' undeclared (first use in this function); did you mean 'cyttsp5_core_rt_suspend'?
Change-Id: I820b2bd29f8e3db7c7e8b4af81943b5a6d879a47
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
drivers/gpu/drm/rockchip/dw-dp.c:5980:12: error: 'dw_dp_resume' defined but not used [-Werror=unused-function]
drivers/gpu/drm/rockchip/dw-dp.c:5970:12: error: 'dw_dp_suspend' defined but not used [-Werror=unused-function]
drivers/gpu/drm/rockchip/dw-dp.c:5959:12: error: 'dw_dp_resume_noirq' defined but not used [-Werror=unused-function]
drivers/gpu/drm/rockchip/dw-dp.c:5948:12: error: 'dw_dp_suspend_noirq' defined but not used [-Werror=unused-function]
Change-Id: Id49b85c3aaee3da324753b089f5c9617cc581113
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c:4592:12: error: 'dw_hdmi_rockchip_resume' defined but not used [-Werror=unused-function]
drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c:4574:12: error: 'dw_hdmi_rockchip_suspend' defined but not used [-Werror=unused-function]
Change-Id: I664da3e2e0df5991aa7f8ffe20487a04dded9e82
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
drivers/mmc/host/sdhci-of-dwcmshc.c:1115:28: error: 'dwcmshc_runtime_suspend' undeclared here (not in a function); did you mean 'pm_runtime_suspend'?
drivers/mmc/host/sdhci-of-dwcmshc.c:1115:53: error: 'dwcmshc_runtime_resume' undeclared here (not in a function); did you mean 'pm_runtime_resume'?
Change-Id: Icb0b18860e3c0bda2a22645cf98bf4bfbbade426
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
drivers/power/supply/rk817_battery.c:630:13: error: 'rk817_bat_resume_work' used but never defined [-Werror]
drivers/power/supply/rk817_battery.c:3090:17: error: 'rk817_get_rtc_sec' defined but not used [-Werror=unused-function]
Change-Id: Ief6fdc006d8489e6452de762c1f8be989ecd45d1
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
Fixes the following warning when !SUSPEND:
drivers/soc/rockchip/rockchip_pm_config.c:258:34: error: use of undeclared identifier 'mem_sleep_current'
drivers/soc/rockchip/rockchip_pm_config.c:551:34: error: use of undeclared identifier 'mem_sleep_current'
Change-Id: I9c6c215094444937d58fc877d8841669b54ee63d
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
RK3588/RK3576 support max ffe level up to 3, but some TVS
such as samsung Q700T only support level 0. The max ffe
level is optional according to the hdmi specification.
Therefore, the default max ffe level is set to 0 and can
be configured via dts.
Change-Id: I94d56559c2fe38f8dade63c24c7bcdd13a9aefc9
Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
