[ Upstream commit ca94b2b036c22556c3a66f1b80f490882deef7a6 ]
Currently, bcsp_recv() can be called even when the BCSP protocol has not
been registered. This leads to a NULL pointer dereference, as shown in
the following stack trace:
KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f]
RIP: 0010:bcsp_recv+0x13d/0x1740 drivers/bluetooth/hci_bcsp.c:590
Call Trace:
<TASK>
hci_uart_tty_receive+0x194/0x220 drivers/bluetooth/hci_ldisc.c:627
tiocsti+0x23c/0x2c0 drivers/tty/tty_io.c:2290
tty_ioctl+0x626/0xde0 drivers/tty/tty_io.c:2706
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
To prevent this, ensure that the HCI_UART_REGISTERED flag is set before
processing received data. If the protocol is not registered, return
-EUNATCH.
Reported-by: syzbot+4ed6852d4da4606c93da@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=4ed6852d4da4606c93da
Tested-by: syzbot+4ed6852d4da4606c93da@syzkaller.appspotmail.com
Signed-off-by: Ivan Pravdin <ipravdin.official@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70a5ce8bc94545ba0fb47b2498bfb12de2132f4d ]
bp->dev->dev_addr is of type `unsigned char *`. Casting it to a u32
pointer and dereferencing implies dealing manually with endianness,
which is error-prone.
Replace by calls to get_unaligned_le32|le16() helpers.
This was found using sparse:
⟩ make C=2 drivers/net/ethernet/cadence/macb_main.o
warning: incorrect type in assignment (different base types)
expected unsigned int [usertype] bottom
got restricted __le32 [usertype]
warning: incorrect type in assignment (different base types)
expected unsigned short [usertype] top
got restricted __le16 [usertype]
...
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250923-macb-fixes-v6-5-772d655cdeb6@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 733a763dd8b3ac2858dd238a91bb3a2fdff4739e ]
The problem of having class-D initialization sequence in probe using
regmap_register_patch() is that it will do hardware register writes
immediately after being called as it bypasses regcache. Afterwards, in
aic3x_init() we also perform codec soft reset, rendering class-D init
sequence pointless. This issue is even more apparent when using reset
GPIO line, since in that case class-D amplifier initialization fails
with "Failed to init class D: -5" message as codec is already held in
reset state after requesting the reset GPIO and hence hardware I/O
fails with -EIO errno.
Thus move class-D amplifier initialization sequence from probe function
to aic3x_set_power() just before the usual regcache sync. Use bypassed
regmap_multi_reg_write_bypassed() function to make sure, class-D init
sequence is performed in proper order as described in the datasheet.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Link: https://patch.msgid.link/20250925085929.2581749-1-primoz.fiser@norik.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27fa1a8b2803dfd88c39f03b0969c55f667cdc43 ]
The mclk direction now needs to be specified in endpoint node with
"system-clock-direction-out" property. However some calls to the
set_sysclk callback, related to CPU DAI clock, result in unbalanced
calls to clock API.
The set_sysclk callback in STM32 SAI driver is intended only for mclk
management. So it is relevant to ensure that calls to set_sysclk are
related to mclk only.
Since the master clock is handled only at runtime, skip the calls to
set_sysclk in the initialization phase.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20250916123118.84175-1-olivier.moysan@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46e75c56dfeafb6756773b71cabe187a6886859a ]
The following code paths may result in high latency or even task hangs:
1. fastcommit io is throttled by wbt.
2. jbd2_fc_wait_bufs() might wait for a long time while
JBD2_FAST_COMMIT_ONGOING is set in journal->flags, and then
jbd2_journal_commit_transaction() waits for the
JBD2_FAST_COMMIT_ONGOING bit for a long time while holding the write
lock of j_state_lock.
3. start_this_handle() waits for read lock of j_state_lock which
results in high latency or task hang.
Given the fact that ext4_fc_commit() already modifies the current
process' IO priority to match that of the jbd2 thread, it should be
reasonable to match jbd2's IO submission flags as well.
Suggested-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Julian Sun <sunjunchao@bytedance.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20250827121812.1477634-1-sunjunchao@bytedance.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1534f72dc2a11ded38b0e0268fbcc0ca24e9fd4a ]
The parent function ext4_xattr_inode_lookup_create already uses GFP_NOFS for memory alloction, so the function ext4_xattr_inode_cache_find should use same gfp_flag.
Signed-off-by: chuguangqing <chuguangqing@inspur.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 513024d5a0e34fd34247043f1876b6138ca52847 ]
When IOMMU is enabled, dma_alloc_coherent() with GFP_USER may return
addresses from the vmalloc range. If such an address is mapped without
VM_MIXEDMAP, vm_insert_page() will trigger a BUG_ON due to the
VM_PFNMAP restriction.
Fix this by checking for vmalloc addresses and setting VM_MIXEDMAP
in the VMA before mapping. This ensures safe mapping and avoids kernel
crashes. The memory is still driver-allocated and cannot be accessed
directly by userspace.
Signed-off-by: Moti Haimovski <moti.haimovski@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0d866bab184161ba155b352650083bf6695e50e ]
Dirty state can occur when the host VM undergoes a reset while the
device does not. In such a case, the driver must reset the device before
it can be used again. As part of this reset, the device capabilities
are zeroed. Therefore, the driver must read the Preboot status again to
learn the Preboot state, capabilities, and security configuration.
Signed-off-by: Konstantin Sinyuk <konstantin.sinyuk@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f5067531c9b79318c4e48a933cb2694f53f3de2 ]
EFAULT is currently returned if less than requested user pages are
pinned. This value means a "bad address" which might be confusing to
the user, as the address of the given user memory is not necessarily
"bad".
Modify the return value to ENOMEM, as "out of memory" is more suitable
in this case.
Signed-off-by: Tomer Tayar <tomer.tayar@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4be7599d6b27bade41bfccca42901b917c01c30c ]
Add handling for MPI26_SAS_NEG_LINK_RATE_22_5 in
_transport_convert_phy_link_rate(). This maps the new 22.5 Gbps
negotiated rate to SAS_LINK_RATE_22_5_GBPS, to get correct PHY link
speeds.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Message-Id: <20250922095113.281484-4-ranjan.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4fd8e56c9a3b614370fde2d45aec1032eb67ddd ]
Change the BMON_CR register value back to its original state before
enabling, so that BMON does not continue to collect information
after being disabled.
Signed-off-by: Vered Yavniely <vered.yavniely@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 072fdd4b0be9b9051bdf75f36d0227aa705074ba ]
The fc_ct_ms_fill() helper currently formats the OS name and version
into entry->value using "%s v%s". Since init_utsname()->sysname and
->release are unbounded strings, snprintf() may attempt to write more
than FC_FDMI_HBA_ATTR_OSNAMEVERSION_LEN bytes, triggering a
-Wformat-truncation warning with W=1.
In file included from drivers/scsi/libfc/fc_elsct.c:18:
drivers/scsi/libfc/fc_encode.h: In function ‘fc_ct_ms_fill.constprop’:
drivers/scsi/libfc/fc_encode.h:359:30: error: ‘%s’ directive output may
be truncated writing up to 64 bytes into a region of size between 62
and 126 [-Werror=format-truncation=]
359 | "%s v%s",
| ^~
360 | init_utsname()->sysname,
361 | init_utsname()->release);
| ~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/libfc/fc_encode.h:357:17: note: ‘snprintf’ output between
3 and 131 bytes into a destination of size 128
357 | snprintf((char *)&entry->value,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
358 | FC_FDMI_HBA_ATTR_OSNAMEVERSION_LEN,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
359 | "%s v%s",
| ~~~~~~~~~
360 | init_utsname()->sysname,
| ~~~~~~~~~~~~~~~~~~~~~~~~
361 | init_utsname()->release);
| ~~~~~~~~~~~~~~~~~~~~~~~~
Fix this by using "%.62s v%.62s", which ensures sysname and release are
truncated to fit within the 128-byte field defined by
FC_FDMI_HBA_ATTR_OSNAMEVERSION_LEN.
[mkp: clarified commit description]
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd9a9562b2559973aa1b68c3af63021a2c5fd022 ]
Currently, after the bridge is created, the FDB does not hold an FDB entry
for the bridge MAC on VLAN 0:
# ip link add name br up type bridge
# ip -br link show dev br
br UNKNOWN 92:19:8c:4e:01:ed <BROADCAST,MULTICAST,UP,LOWER_UP>
# bridge fdb show | grep 92:19:8c:4e:01:ed
92:19:8c:4e:01:ed dev br vlan 1 master br permanent
Later when the bridge MAC is changed, or in fact when the address is given
during netdevice creation, the entry appears:
# ip link add name br up address 00:11:22:33:44:55 type bridge
# bridge fdb show | grep 00:11:22:33:44:55
00:11:22:33:44:55 dev br vlan 1 master br permanent
00:11:22:33:44:55 dev br master br permanent
However when the bridge address is set by the user to the current bridge
address before the first port is enslaved, none of the address handlers
gets invoked, because the address is not actually changed. The address is
however marked as NET_ADDR_SET. Then when a port is enslaved, the address
is not changed, because it is NET_ADDR_SET. Thus the VLAN 0 entry is not
added, and it has not been added previously either:
# ip link add name br up type bridge
# ip -br link show dev br
br UNKNOWN 7e:f0:a8:1a:be:c2 <BROADCAST,MULTICAST,UP,LOWER_UP>
# ip link set dev br addr 7e:f0:a8:1a:be:c2
# ip link add name v up type veth
# ip link set dev v master br
# ip -br link show dev br
br UNKNOWN 7e:f0:a8:1a:be:c2 <BROADCAST,MULTICAST,UP,LOWER_UP>
# bridge fdb | grep 7e:f0:a8:1a:be:c2
7e:f0:a8:1a:be:c2 dev br vlan 1 master br permanent
Then when the bridge MAC is used as DMAC, and br_handle_frame_finish()
looks up an FDB entry with VLAN=0, it doesn't find any, and floods the
traffic instead of passing it up.
Fix this by simply adding the VLAN 0 FDB entry for the bridge itself always
on netdevice creation. This also makes the behavior consistent with how
ports are treated: ports always have an FDB entry for each member VLAN as
well as VLAN 0.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/415202b2d1b9b0899479a502bbe2ba188678f192.1758550408.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a890a2e339b929dbd843328f9a92a1625404fe63 ]
Theoretically it's an oopsable race, but I don't believe one can manage
to hit it on real hardware; might become doable on a KVM, but it still
won't be easy to attack.
Anyway, it's easy to deal with - since xdr_encode_hyper() is just a call of
put_unaligned_be64(), we can put that under ->d_lock and be done with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf75ad096820fee5da40e671ebb32de725a1c417 ]
When client initialization goes through server trunking discovery, it
schedules the state manager and then sleeps waiting for nfs_client
initialization completion.
The state manager can fail during state recovery, and specifically in
lease establishment as nfs41_init_clientid() will bail out in case of
errors returned from nfs4_proc_create_session(), without ever marking
the client ready. The session creation can fail for a variety of reasons
e.g. during backchannel parameter negotiation, with status -EINVAL.
The error status will propagate all the way to the nfs4_state_manager
but the client status will not be marked, and thus the mount process
will remain blocked waiting.
Fix it by adding -EINVAL error handling to nfs4_state_manager().
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be390f95242785adbf37d7b8a5101dd2f2ba891b ]
RFC7530 states that clients should be prepared for the return of
NFS4ERR_GRACE errors for non-reclaim lock and I/O requests.
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8bedab2d9a1a0daa49ac20f9928a943f7205582 ]
[WHY]
Ensure AVI infoframe updates from stream updates are applied to the active
stream so OS overrides are not lost.
[HOW]
Copy avi_infopacket to stream when valid flag is set.
Follow existing infopacket copy pattern and perform a basic validity check before assignment.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 299fad4133677b845ce962f78c9cf75bded63f61 ]
When a device is surprise-removed (e.g., due to a dock unplug), the PCI
core unconfigures all downstream devices and sets their error state to
pci_channel_io_perm_failure. This marks them as disconnected via
pci_dev_is_disconnected().
During device removal, the runtime PM framework may attempt to resume the
device to D0 via pm_runtime_get_sync(), which calls into pci_power_up().
Since the device is already disconnected, this resume attempt is
unnecessary and results in a predictable errors like this, typically when
undocking from a TBT3 or USB4 dock with PCIe tunneling:
pci 0000:01:00.0: Unable to change power state from D3cold to D0, device inaccessible
Avoid powering up disconnected devices by checking their status early in
pci_power_up() and returning -EIO.
Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
[bhelgaas: add typical message]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://patch.msgid.link/20250909031916.4143121-1-superm1@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16df67f2189a71a8310bcebddb87ed569e8352be ]
The two implementers of vfio_device_ops.device_feature,
vfio_cdx_ioctl_feature and vfio_pci_core_ioctl_feature, return
-ENOTTY in the fallthrough case when the feature is unsupported. For
consistency, the base case, vfio_ioctl_device_feature, should do the
same when device_feature == NULL, indicating an implementation has no
feature extensions.
Signed-off-by: Alex Mastro <amastro@fb.com>
Link: https://lore.kernel.org/r/20250908-vfio-enotty-v1-1-4428e1539e2e@fb.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7205ef77dfe167df1b83aea28cf00fc02d662990 ]
Conventions for readsl() are the same as for readl() - any __iomem
pointer is acceptable, both const and volatile ones being OK. Same
for readsb() and readsw().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com> # Making sparc64 subject prefix
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05457d96175d25c976ab6241c332ae2eb5e07833 ]
This is needed so that the kernel can handle R_SPARC_UA64 relocations,
which is emitted by LLVM's IAS.
Signed-off-by: Koakuma <koachan@protonmail.com>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf7154ffb1c65a201906296a9d3eb22e9daa5ffc ]
EEE speed down means speed down MAC MCU clock. It is not from spec.
It is kind of Realtek specific power saving feature. But enable it
may cause some issues, like packet drop or interrupt loss. Different
hardware may have different issues.
EEE speed down ratio (mac ocp 0xe056[7:4]) is used to set EEE speed
down rate. The larger this value is, the more power can save. But it
actually save less power then we expected. And, as mentioned above,
will impact compatibility. So set it to 1 (mac ocp 0xe056[7:4] = 0)
, which means not to speed down, to improve compatibility.
Signed-off-by: ChunHao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/20250918023425.3463-1-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99e9c5ffbbee0f258a1da4eadf602b943f8c8300 ]
Variable idx is set in the loop, but is never used resulting in dead
code. Building with GCC 16, which enables
-Werror=unused-but-set-parameter= by default results in build error.
This patch removes the idx parameter, since all the callers of the
fm10k_unbind_hw_stats_q as 0 as idx anyways.
Suggested-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Brahmajit Das <listout@listout.xyz>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75c02a037609f34db17e91be195cedb33b61bae0 ]
snprintf() returns the number of bytes that would have been written, not
the number actually written. Using this for offset tracking can cause
buffer overruns if truncation occurs.
Replace snprintf() with scnprintf() to ensure the offset stays within
bounds.
Since scnprintf() never returns a negative value, and zero is not possible
in this context because 'bytes' starts at 0 and 'size - bytes' is
DEBUG_BUFFER_SIZE in the first call, which is large enough to hold the
string literals used, the return value is always positive. An integer
overflow is also completely out of reach here due to the small and fixed
buffer size. The error check in latency_show_one() is therefore
unnecessary. Remove it and make dmar_latency_snapshot() return void.
Signed-off-by: Seyediman Seyedarab <ImanDevel@gmail.com>
Link: https://lore.kernel.org/r/20250731225048.131364-1-ImanDevel@gmail.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60f887b1290b43a4f5a3497982a725687b193fa4 ]
When a PHY is halted (e.g. `ip link set dev lan2 down`), several
fields in struct phy_device may still reflect the last active
connection. This leads to ethtool showing stale values even though
the link is down.
Reset selected fields in _phy_state_machine() when transitioning
to PHY_HALTED and the link was previously up:
- speed/duplex -> UNKNOWN, but only in autoneg mode (in forced mode
these fields carry configuration, not status)
- master_slave_state -> UNKNOWN if previously supported
- mdix -> INVALID (state only, same meaning as "unknown")
- lp_advertising -> always cleared
The cleanup is skipped if the PHY is in PHY_ERROR state, so the
last values remain available for diagnostics.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250917094751.2101285-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 300b072df72694ea330c4c673c035253e07827b8 ]
The transaction manager initialization in txInit() was not properly
initializing TxBlock[0].waitor waitqueue, causing a crash when
txEnd(0) is called on read-only filesystems.
When a filesystem is mounted read-only, txBegin() returns tid=0 to
indicate no transaction. However, txEnd(0) still gets called and
tries to access TxBlock[0].waitor via tid_to_tblock(0), but this
waitqueue was never initialized because the initialization loop
started at index 1 instead of 0.
This causes a 'non-static key' lockdep warning and system crash:
INFO: trying to register non-static key in txEnd
Fix by ensuring all transaction blocks including TxBlock[0] have
their waitqueues properly initialized during txInit().
Reported-by: syzbot+c4f3462d8b2ad7977bea@syzkaller.appspotmail.com
Signed-off-by: Shaurya Rane <ssrane_b23@ee.vjti.ac.in>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9fba1eb39e2f74d2002c5cbcf1d4435d37a4f752 ]
Add READ_ONCE() annotations because np->rxpmtu can be changed
while udpv6_recvmsg() and rawv6_recvmsg() read it.
Since this is a very rarely used feature, and that udpv6_recvmsg()
and rawv6_recvmsg() read np->rxopt anyway, change the test order
so that np->rxpmtu does not need to be in a hot cache line.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250916160951.541279-4-edumazet@google.com
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23361bd54966b437e1ed3eb1a704572f4b279e58 ]
When we get wrong extent info data, and look up extent_node in rb tree,
it will cause infinite loop (CONFIG_F2FS_CHECK_FS=n). Avoiding this by
return NULL and print some kernel messages in that case.
Signed-off-by: wangzijie <wangzijie1@honor.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41cf11946b9076383a2222bbf1ef57d64d033f66 ]
Allow autosuspend to be used by xhci plat device. For Qualcomm SoCs,
when in host mode, it is intended that the controller goes to suspend
state to save power and wait for interrupts from connected peripheral
to wake it up. This is particularly used in cases where a HID or Audio
device is connected. In such scenarios, the usb controller can enter
auto suspend and resume action after getting interrupts from the
connected device.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250916120436.3617598-1-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 368ed48a5ef52e384f54d5809f0a0b79ac567479 ]
The usbmon binary interface currently truncates captures of large
transfers from higher-speed USB devices. Because a single event capture
is limited to one-fifth of the total buffer size, the current maximum
size of a captured URB is around 240 KiB. This is insufficient when
capturing traffic from modern devices that use transfers of several
hundred kilobytes or more, as truncated URBs can make it impossible for
user-space USB analysis tools like Wireshark to properly defragment and
reassemble higher-level protocol packets in the captured data.
The root cause of this issue is the 1200 KiB BUFF_MAX limit, which has
not been changed since the binary interface was introduced in 2006.
To resolve this issue, this patch increases BUFF_MAX to 64 MiB. The
original comment for BUFF_MAX based the limit's calculation on a
saturated 480 Mbit/s bus. Applying the same logic to a modern USB 3.2
Gen 2×2 20 Gbit/s bus (~2500 MB/s over a 20ms window) indicates the
buffer should be at least 50 MB. The new limit of 64 MiB covers that,
plus a little extra for any overhead.
With this change, both users and developers should now be able to debug
and reverse engineer modern USB devices even when running unmodified
distro kernels.
Please note that this change does not affect the default buffer size. A
larger buffer is only allocated when a user explicitly requests it via
the MON_IOCT_RING_SIZE ioctl, so the change to the maximum buffer size
should not unduly increase memory usage for users that don't
deliberately request a larger buffer.
Link: https://lore.kernel.org/CAO3ALPzdUkmMr0YMrODLeDSLZqNCkWcAP8NumuPHLjNJ8wC1kQ@mail.gmail.com
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/CAO3ALPxU5RzcoueC454L=WZ1qGMfAcnxm+T+p+9D8O9mcrUbCQ@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe91e078b60d1beabf5cef4a37c848457a6d2dfb ]
... allowing any ->lookup() return value to be passed to it.
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5de09770b1c0e229d2cec93e7f634fcdc87c9bc8 ]
To assist in debugging lpfc_xri_rebalancing driver parameter, a debugfs
entry is used. The debugfs file operations for xri rebalancing have
been previously implemented, but lack definition for its information
buffer size. Similar to other pre-existing debugfs entry buffers,
define LPFC_HDWQINFO_SIZE as 8192 bytes.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Message-ID: <20250915180811.137530-9-justintee8345@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4809b98eb004fcbf7c4d45eb5a624d1c682bb73 ]
In lpfc_cleanup, there is an extraneous nlp_put for NPIV ports on the
F_Port_Ctrl ndlp object. In cases when an ABTS is issued, the
outstanding kref is needed for when a second XRI_ABORTED CQE is
received. The final kref for the ndlp is designed to be decremented in
lpfc_sli4_els_xri_aborted instead. Also, add a new log message to allow
for future diagnostics when debugging related issues.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Message-ID: <20250915180811.137530-5-justintee8345@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f408dde2468b3957e92b25e7438f74c8e9fb9e73 ]
If lpfc_reset_flush_io_context fails to execute, then the wrong return
status code may be passed back to upper layers when issuing a target
reset TMF command. Fix by checking the return status from
lpfc_reset_flush_io_context() first in order to properly return FAILED
or FAST_IO_FAIL.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Message-ID: <20250915180811.137530-7-justintee8345@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7ddcf921e7d0d8ebe82e89635bc9dc26ba9540d ]
Gang submission means that the kernel driver guarantees that multiple
submissions are executed on the HW at the same time on different engines.
Background is that those submissions then depend on each other and each
can't finish stand alone.
SRIOV now uses world switch to preempt submissions on the engines to allow
sharing the HW resources between multiple VFs.
The problem is now that the SRIOV world switch can't know about such inter
dependencies and will cause a timeout if it waits for a partially running
gang submission.
To conclude SRIOV and gang submissions are fundamentally incompatible at
the moment. For now just disable them.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d62beb102d6fa9a4e5e874be7fbf47a62fcc4f6 ]
Dell systems utilize an EC-based touchpad emulation when the ACPI
touchpad _DSM is not invoked. This emulation acts as a secondary
master on the I2C bus, designed for scenarios where the I2C touchpad
driver is absent, such as in BIOS menus. Typically, loading the
i2c-hid module triggers the _DSM at initialization, disabling the
EC-based emulation.
However, if the i2c-hid module is missing from the boot kernel
used for hibernation snapshot restoration, the _DSM remains
uncalled, resulting in dual masters on the I2C bus and
subsequent arbitration errors. This issue arises when i2c-hid
resides in the rootfs instead of the kernel or initramfs.
To address this, switch from using the SYSTEM_SLEEP_PM_OPS()
macro to dedicated callbacks, introducing a specific
callback for restoring the S4 image. This callback ensures
the _DSM is invoked.
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d2d3f529e7b6ff2aa432b16a2317126621c28058 ]
A lot of modern SoC have the ability to store MAC addresses in their
NVMEM. So extend the generic function device_get_mac_address() to
obtain the MAC address from an nvmem cell named 'mac-address' in
case there is no firmware node which contains the MAC address directly.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250912140332.35395-3-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
