Although there are processors supporting hardware-managed P-states
(HWP) without the energy-performance preference (EPP) feature, they
are not expected to be run with HWP enabled (the BIOS should disable
HWP on those systems). Missing EPP support generally indicates an
incomplete HWP implementation and so it is better to avoid using
HWP on those systems in production.
However, intel_pstate currently enables HWP on such systems, which
is questionable, so prevent it from doing that by making it check
EPP support before enabling HWP and avoid enabling it if EPP is not
supported by the processor at hand.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The kerneldoc description of the aperf_mperf_shift field in
struct global_params is unclear and there is a typo in it, so
simplify it and clean it up.
Reported-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lee Jones <lee.jones@linaro.org>
The sparse tool complains as follows:
drivers/cpufreq/powernv-cpufreq.c:88:1: warning:
symbol 'pstate_revmap' was not declared. Should it be static?
drivers/cpufreq/powernv-cpufreq.c:383:18: warning:
symbol 'cpufreq_freq_attr_cpuinfo_nominal_freq' was not declared. Should it be static?
drivers/cpufreq/powernv-cpufreq.c:669:6: warning:
symbol 'gpstate_timer_handler' was not declared. Should it be static?
drivers/cpufreq/powernv-cpufreq.c:902:6: warning:
symbol 'powernv_cpufreq_work_fn' was not declared. Should it be static?
Those symbols are not used outside of this file, so mark
them static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ot used when MODULE is not defined.
Fixes the following W=1 kernel build warning(s):
drivers/cpufreq/amd_freq_sensitivity.c:147:32: warning: ‘amd_freq_sensitivity_ids’ defined but not used [-Wunused-const-variable=]
147 | static const struct x86_cpu_id amd_freq_sensitivity_ids[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fixes the following W=1 kernel build warning(s):
drivers/cpufreq/intel_pstate.c:293: warning: Function parameter or member 'get_aperf_mperf_shift' not described in 'pstate_funcs'
Suggested-by: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Remove line break ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Not used when MODULE is not defined.
Fixes the following W=1 kernel build warning(s):
drivers/cpufreq/pcc-cpufreq.c:619:36: warning: ‘processor_device_ids’ defined but not used [-Wunused-const-variable=]
619 | static const struct acpi_device_id processor_device_ids[] = {
| ^~~~~~~~~~~~~~~~~~~~
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
if we fail to use a variable, even a dummy ones, then the compiler
complains that it is set but not used. We know this is fine, so we
set them as __always_unused here to let the compiler know.
Fixes the following W=1 kernel build warning(s):
drivers/cpufreq/powernow-k8.c: In function ‘pending_bit_stuck’:
drivers/cpufreq/powernow-k8.c:89:10: warning: variable ‘hi’ set but not used [-Wunused-but-set-variable]
89 | u32 lo, hi;
| ^~
drivers/cpufreq/powernow-k8.c: In function ‘core_voltage_pre_transition’:
drivers/cpufreq/powernow-k8.c:285:14: warning: variable ‘lo’ set but not used [-Wunused-but-set-variable]
285 | u32 maxvid, lo, rvomult = 1;
| ^~
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Not used when MODULE is not defined.
Fixes the following W=1 kernel build warning(s):
drivers/cpufreq/acpi-cpufreq.c:1004:36: warning: ‘processor_device_ids’ defined but not used [-Wunused-const-variable=]
997 | static const struct x86_cpu_id acpi_cpufreq_ids[] = {
| ^~~~~~~~~~~~~~~~
drivers/cpufreq/acpi-cpufreq.c:997:32: warning: ‘acpi_cpufreq_ids’ defined but not used [-Wunused-const-variable=]
619 | static const struct acpi_device_id processor_device_ids[] = {
| ^~~~~~~~~~~~~~~~~~~~
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If we fail to use a variable, even a 'dummy' one, then the compiler
complains that it is set but not used. We know this is fine, so we
set it as __always_unused to let the compiler know.
Fixes the following W=1 kernel build warning(s):
drivers/cpufreq/acpi-cpufreq.c: In function ‘cpu_freq_read_intel’:
drivers/cpufreq/acpi-cpufreq.c:247:11: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]
drivers/cpufreq/acpi-cpufreq.c: In function ‘cpu_freq_read_amd’:
drivers/cpufreq/acpi-cpufreq.c:265:11: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Repair problems with formatting and missing attributes/parameters, and
demote header comments which do not meet the required standards
applicable to kerneldoc.
Fixes the following W=1 kernel build warning(s):
drivers/cpufreq/powernv-cpufreq.c:84: warning: Function parameter or member 'last_lpstate_idx' not described in 'global_pstate_info'
drivers/cpufreq/powernv-cpufreq.c:84: warning: Function parameter or member 'last_gpstate_idx' not described in 'global_pstate_info'
drivers/cpufreq/powernv-cpufreq.c:84: warning: Function parameter or member 'policy' not described in 'global_pstate_info'
drivers/cpufreq/powernv-cpufreq.c:182: warning: Function parameter or member 'i' not described in 'idx_to_pstate'
drivers/cpufreq/powernv-cpufreq.c:201: warning: Function parameter or member 'pstate' not described in 'pstate_to_idx'
drivers/cpufreq/powernv-cpufreq.c:670: warning: Function parameter or member 't' not described in 'gpstate_timer_handler'
drivers/cpufreq/powernv-cpufreq.c:670: warning: Excess function parameter 'data' description in 'gpstate_timer_handler'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If function callers and providers do not share the same prototypes the
compiler complains of missing prototypes. Fix this by including the
correct platforms header file.
Fixes the following W=1 kernel build warning(s):
drivers/cpufreq/pasemi-cpufreq.c:109:5: warning: no previous prototype for ‘check_astate’ [-Wmissing-prototypes]
109 | int check_astate(void)
| ^~~~~~~~~~~~
drivers/cpufreq/pasemi-cpufreq.c:114:6: warning: no previous prototype for ‘restore_astate’ [-Wmissing-prototypes]
114 | void restore_astate(int cpu)
| ^~~~~~~~~~~~~~
Suggested-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is no need for this to be denoted as kerneldoc.
Fixes the following W=1 kernel build warning(s):
drivers/cpufreq/cpufreq_governor.c:46: warning: Function parameter or member 'attr_set' not described in 'store_sampling_rate'
drivers/cpufreq/cpufreq_governor.c:46: warning: Function parameter or member 'buf' not described in 'store_sampling_rate'
drivers/cpufreq/cpufreq_governor.c:46: warning: Function parameter or member 'count' not described in 'store_sampling_rate'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Also provide missing function parameter description for 'cpu' and 'policy'.
Fixes the following W=1 kernel build warning(s):
drivers/cpufreq/cpufreq.c:60: warning: cannot understand function prototype: 'struct cpufreq_driver *cpufreq_driver; '
drivers/cpufreq/cpufreq.c:90: warning: Function parameter or member 'cpufreq_policy_notifier_list' not described in 'BLOCKING_NOTIFIER_HEAD'
drivers/cpufreq/cpufreq.c:312: warning: Function parameter or member 'val' not described in 'adjust_jiffies'
drivers/cpufreq/cpufreq.c:312: warning: Function parameter or member 'ci' not described in 'adjust_jiffies'
drivers/cpufreq/cpufreq.c:538: warning: Function parameter or member 'policy' not described in 'cpufreq_driver_resolve_freq'
drivers/cpufreq/cpufreq.c:686: warning: Function parameter or member 'file_name' not described in 'show_one'
drivers/cpufreq/cpufreq.c:686: warning: Function parameter or member 'object' not described in 'show_one'
drivers/cpufreq/cpufreq.c:731: warning: Function parameter or member 'file_name' not described in 'store_one'
drivers/cpufreq/cpufreq.c:731: warning: Function parameter or member 'object' not described in 'store_one'
drivers/cpufreq/cpufreq.c:741: warning: Function parameter or member 'policy' not described in 'show_cpuinfo_cur_freq'
drivers/cpufreq/cpufreq.c:741: warning: Function parameter or member 'buf' not described in 'show_cpuinfo_cur_freq'
drivers/cpufreq/cpufreq.c:754: warning: Function parameter or member 'policy' not described in 'show_scaling_governor'
drivers/cpufreq/cpufreq.c:754: warning: Function parameter or member 'buf' not described in 'show_scaling_governor'
drivers/cpufreq/cpufreq.c:770: warning: Function parameter or member 'policy' not described in 'store_scaling_governor'
drivers/cpufreq/cpufreq.c:770: warning: Function parameter or member 'buf' not described in 'store_scaling_governor'
drivers/cpufreq/cpufreq.c:770: warning: Function parameter or member 'count' not described in 'store_scaling_governor'
drivers/cpufreq/cpufreq.c:806: warning: Function parameter or member 'policy' not described in 'show_scaling_driver'
drivers/cpufreq/cpufreq.c:806: warning: Function parameter or member 'buf' not described in 'show_scaling_driver'
drivers/cpufreq/cpufreq.c:815: warning: Function parameter or member 'policy' not described in 'show_scaling_available_governors'
drivers/cpufreq/cpufreq.c:815: warning: Function parameter or member 'buf' not described in 'show_scaling_available_governors'
drivers/cpufreq/cpufreq.c:859: warning: Function parameter or member 'policy' not described in 'show_related_cpus'
drivers/cpufreq/cpufreq.c:859: warning: Function parameter or member 'buf' not described in 'show_related_cpus'
drivers/cpufreq/cpufreq.c:867: warning: Function parameter or member 'policy' not described in 'show_affected_cpus'
drivers/cpufreq/cpufreq.c:867: warning: Function parameter or member 'buf' not described in 'show_affected_cpus'
drivers/cpufreq/cpufreq.c:901: warning: Function parameter or member 'policy' not described in 'show_bios_limit'
drivers/cpufreq/cpufreq.c:901: warning: Function parameter or member 'buf' not described in 'show_bios_limit'
drivers/cpufreq/cpufreq.c:1625: warning: Function parameter or member 'dev' not described in 'cpufreq_remove_dev'
drivers/cpufreq/cpufreq.c:1625: warning: Function parameter or member 'sif' not described in 'cpufreq_remove_dev'
drivers/cpufreq/cpufreq.c:2380: warning: Function parameter or member 'cpu' not described in 'cpufreq_get_policy'
drivers/cpufreq/cpufreq.c:2771: warning: Function parameter or member 'driver' not described in 'cpufreq_unregister_driver'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
No attempt has been made to document any of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/cpufreq/freq_table.c:229: warning: Function parameter or member 'policy' not described in 'show_available_freqs'
drivers/cpufreq/freq_table.c:229: warning: Function parameter or member 'buf' not described in 'show_available_freqs'
drivers/cpufreq/freq_table.c:229: warning: Function parameter or member 'show_boost' not described in 'show_available_freqs'
drivers/cpufreq/freq_table.c:269: warning: Function parameter or member 'policy' not described in 'scaling_available_frequencies_show'
drivers/cpufreq/freq_table.c:269: warning: Function parameter or member 'buf' not described in 'scaling_available_frequencies_show'
drivers/cpufreq/freq_table.c:281: warning: Function parameter or member 'policy' not described in 'scaling_boost_frequencies_show'
drivers/cpufreq/freq_table.c:281: warning: Function parameter or member 'buf' not described in 'scaling_boost_frequencies_show'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix warning for:
drivers/cpufreq/intel_pstate.c:731 store_energy_performance_preference()
error: uninitialized symbol 'epp'.
This warning is for a case, when energy_performance_preference attribute
matches pre defined strings. In this case the value of raw epp will not
be used to set EPP bits in MSR_HWP_REQUEST. So initializing with any
value is fine.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The default cpufreq governor is chosen with the help of a "choice"
option in the Kconfig which will always end up selecting one of
the governors and so the weakly defined definition of
cpufreq_default_governor() will never get called.
Moreover, this makes us skip the checking of the return value of
that routine as it will always be non NULL.
If the Kconfig option changes in future, then we will start getting
a link error instead (and it won't go unnoticed as in the case of the
weak definition).
Suggested-by: Quentin Perret <qperret@google.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently, the only way to specify the default CPUfreq governor is
via Kconfig options, which suits users who can build the kernel
themselves perfectly.
However, for those who use a distro-like kernel (such as Android,
with the Generic Kernel Image project), the only way to use a
non-default governor is to boot to userspace, and to then switch
using the sysfs interface. Being able to specify the default governor
on the command line, like is the case for cpuidle, would allow those
users to specify their governor of choice earlier on, and to simplify
the userspace boot procedure slighlty.
To support this use-case, add a kernel command line parameter
allowing the default governor for CPUfreq to be specified, which
takes precedence over the built-in default.
This implementation has one notable limitation: the default governor
must be registered before the driver. This is solved for builtin
governors and drivers using appropriate *_initcall() functions. And
in the modular case, this must be reflected as a constraint on the
module loading order.
Signed-off-by: Quentin Perret <qperret@google.com>
[ Viresh: Converted 'default_governor' to a string and parsing it only
at initcall level, and several updates to
cpufreq_init_policy(). ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently, most CPUFreq governors are registered at the core_initcall
time when the given governor is the default one, and the module_init
time otherwise.
In preparation for letting users specify the default governor on the
kernel command line, change all of them to be registered at the
core_initcall unconditionally, as it is already the case for the
schedutil and performance governors. This will allow us to assume
that builtin governors have been registered before the built-in
CPUFreq drivers probe.
And since all governors have similar init/exit patterns now, introduce
two new macros, cpufreq_governor_{init,exit}(), to factorize the code.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The locking around governors handling isn't adequate currently.
The list of governors should never be traversed without the locking
in place. Also governor modules must not be removed while the code
in them is still in use.
Reported-by: Quentin Perret <qperret@google.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: All applicable <stable@vger.kernel.org>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently using attribute "energy_performance_preference", user space can
write one of the four per-defined preference string. These preference
strings gets mapped to a hard-coded Energy-Performance Preference (EPP) or
Energy-Performance Bias (EPB) knob.
These four values are supposed to cover broad spectrum of use cases, but
are not uniformly distributed in the range. There are number of cases,
where this is not enough. For example:
Suppose user wants more performance when connected to AC. Instead of using
default "balance performance", the "performance" setting can be used. This
changes EPP value from 0x80 to 0x00. But setting EPP to 0, results in
electrical and thermal issues on some platforms. This results in
aggressive throttling, which causes a drop in performance. But some value
between 0x80 and 0x00 results in better performance. But that value can't
be fixed as the power curve is not linear. In some cases just changing EPP
from 0x80 to 0x75 is enough to get significant performance gain.
Similarly on battery the default "balance_performance" mode can be
aggressive in power consumption. But picking up the next choice
"balance power" results in too much loss of performance, which results in
bad user experience in use cases like "Google Hangout". It was observed
that some value between these two EPP is optimal.
This change allows fine grain EPP tuning for platform like Chromebook or
for users who wants to fine tune power and performance.
Here based on the product and use cases, different EPP values can be set.
This change is similar to the change done for:
/sys/devices/system/cpu/cpu*/power/energy_perf_bias
where user has choice to write a predefined string or raw value.
The change itself is trivial. When user preference doesn't match
predefined string preferences and value is an unsigned integer and in
range, use that value for EPP. When the EPP feature is not present
writing raw value is not supported.
Suggested-by: Len Brown <lenb@kernel.org>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
By default intel_pstate the driver disables energy efficiency by setting
MSR_IA32_POWER_CTL bit 19 for Kaby Lake desktop CPU model in HWP mode.
This CPU model is also shared by Coffee Lake desktop CPUs. This allows
these systems to reach maximum possible frequency. But this adds power
penalty, which some customers don't want. They want some way to enable/
disable dynamically.
So, add an additional attribute "energy_efficiency" under
/sys/devices/system/cpu/intel_pstate/ for these CPU models. This allows
to read and write bit 19 ("Disable Energy Efficiency Optimization") in
the MSR IA32_POWER_CTL.
This attribute is present in both HWP and non-HWP mode as this has an
effect in both modes. Refer to Intel Software Developer's manual for
details.
The scope of this bit is package wide. Also these systems are single
package systems. So read/write MSR on the current CPU is enough.
The energy efficiency (EE) bit setting needs to be preserved during
suspend/resume and CPU offline/online operation. To do this:
- Restoring the EE setting from the cpufreq resume() callback, if there
is change from the system default.
- By default, don't disable EE from cpufreq init() callback for matching
CPU models. Since the scope is package wide and is a single package
system, move the disable EE calls from init() callback to
intel_pstate_init() function, which is called only once.
Suggested-by: Len Brown <lenb@kernel.org>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull ARM OMAP fixes from Arnd Bergmann:
"The OMAP developers are particularly active at hunting down
regressions, so this is a separate branch with OMAP specific
fixes for v5.8:
As Tony explains
"The recent display subsystem (DSS) related platform data changes
caused display related regressions for suspend and resume. Looks
like I only tested suspend and resume before dropping the legacy
platform data, and forgot to test it after dropping it. Turns out
the main issue was that we no longer have platform code calling
pm_runtime_suspend for DSS like we did for the legacy platform data
case, and that fix is still being discussed on the dri-devel list
and will get merged separately. The DSS related testing exposed a
pile other other display related issues that also need fixing
though":
- Fix ti-sysc optional clock handling and reset status checks for
devices that reset automatically in idle like DSS
- Ignore ti-sysc clockactivity bit unless separately requested to
avoid unexpected performance issues
- Init ti-sysc framedonetv_irq to true and disable for am4
- Avoid duplicate DSS reset for legacy mode with dts data
- Remove LCD timings for am4 as they cause warnings now that we're
using generic panels
Other OMAP changes from Tony include:
- Fix omap_prm reset deassert as we still have drivers setting the
pm_runtime_irq_safe() flag
- Flush posted write for ti-sysc enable and disable
- Fix droid4 spi related errors with spi flags
- Fix am335x USB range and a typo for softreset
- Fix dra7 timer nodes for clocks for IPU and DSP
- Drop duplicate mailboxes after mismerge for dra7
- Prevent pocketgeagle header line signal from accidentally setting
micro-SD write protection signal by removing the default mux
- Fix NFSroot flakeyness after resume for duover by switching the
smsc911x gpio interrupt to back to level sensitive
- Fix regression for omap4 clockevent source after recent system
timer changes
- Yet another ethernet regression fix for the "rgmii" vs "rgmii-rxid"
phy-mode
- One patch to convert am3/am4 DT files to use the regular sdhci-omap
driver instead of the old hsmmc driver, this was meant for the
merge window but got lost in the process"
* tag 'arm-omap-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (21 commits)
ARM: dts: am5729: beaglebone-ai: fix rgmii phy-mode
ARM: dts: Fix omap4 system timer source clocks
ARM: dts: Fix duovero smsc interrupt for suspend
ARM: dts: am335x-pocketbeagle: Fix mmc0 Write Protect
Revert "bus: ti-sysc: Increase max softreset wait"
ARM: dts: am437x-epos-evm: remove lcd timings
ARM: dts: am437x-gp-evm: remove lcd timings
ARM: dts: am437x-sk-evm: remove lcd timings
ARM: dts: dra7-evm-common: Fix duplicate mailbox nodes
ARM: dts: dra7: Fix timer nodes properly for timer_sys_ck clocks
ARM: dts: Fix am33xx.dtsi ti,sysc-mask wrong softreset flag
ARM: dts: Fix am33xx.dtsi USB ranges length
bus: ti-sysc: Increase max softreset wait
ARM: OMAP2+: Fix legacy mode dss_reset
bus: ti-sysc: Fix uninitialized framedonetv_irq
bus: ti-sysc: Ignore clockactivity unless specified as a quirk
bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit
ARM: dts: omap4-droid4: Fix spi configuration and increase rate
bus: ti-sysc: Flush posted write on enable and disable
soc: ti: omap-prm: use atomic iopoll instead of sleeping one
...
Pull ARM SoC fixes from Arnd Bergmann:
"Here are a couple of bug fixes, mostly for devicetree files
NXP i.MX:
- Use correct voltage on some i.MX8M board device trees to avoid
hardware damage
- Code fixes for a compiler warning and incorrect reference counting,
both harmless.
- Fix the i.MX8M SoC driver to correctly identify imx8mp
- Fix watchdog configuration in imx6ul-kontron device tree.
Broadcom:
- A small regression fix for the Raspberry-Pi firmware driver
- A Kconfig change to use the correct timer driver on Northstar
- A DT fix for the Luxul XWC-2000 machine
- Two more DT fixes for NSP SoCs
STmicroelectronics STI
- Revert one broken patch for L2 cache configuration
ARM Versatile Express:
- Fix a regression by reverting a broken DT cleanup
TEE drivers:
- MAINTAINERS: change tee mailing list"
* tag 'arm-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
Revert "ARM: sti: Implement dummy L2 cache's write_sec"
soc: imx8m: fix build warning
ARM: imx6: add missing put_device() call in imx6q_suspend_init()
ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram()
soc: imx8m: Correct i.MX8MP UID fuse offset
ARM: dts: imx6ul-kontron: Change WDOG_ANY signal from push-pull to open-drain
ARM: dts: imx6ul-kontron: Move watchdog from Kontron i.MX6UL/ULL board to SoM
arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2
arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage range
arm64: dts: imx8mm-evk: correct ldo1/ldo2 voltage range
ARM: dts: NSP: Correct FA2 mailbox node
ARM: bcm2835: Fix integer overflow in rpi_firmware_print_firmware_revision()
MAINTAINERS: change tee mailing list
ARM: dts: NSP: Disable PL330 by default, add dma-coherent property
ARM: bcm: Select ARM_TIMER_SP804 for ARCH_BCM_NSP
ARM: dts: BCM5301X: Add missing memory "device_type" for Luxul XWC-2000
arm: dts: vexpress: Move mcc node back into motherboard node
Pull timer fix from Ingo Molnar:
"A single DocBook fix"
* tag 'timers-urgent-2020-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix kerneldoc system_device_crosststamp & al
Pull perf fix from Ingo Molnar:
"A single Kbuild dependency fix"
* tag 'perf-urgent-2020-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/rapl: Fix RAPL config variable bug
Pull EFI fixes from Ingo Molnar:
- Fix build regression on v4.8 and older
- Robustness fix for TPM log parsing code
- kobject refcount fix for the ESRT parsing code
- Two efivarfs fixes to make it behave more like an ordinary file
system
- Style fixup for zero length arrays
- Fix a regression in path separator handling in the initrd loader
- Fix a missing prototype warning
- Add some kerneldoc headers for newly introduced stub routines
- Allow support for SSDT overrides via EFI variables to be disabled
- Report CPU mode and MMU state upon entry for 32-bit ARM
- Use the correct stack pointer alignment when entering from mixed mode
* tag 'efi-urgent-2020-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/libstub: arm: Print CPU boot mode and MMU state at boot
efi/libstub: arm: Omit arch specific config table matching array on arm64
efi/x86: Setup stack correctly for efi_pe_entry
efi: Make it possible to disable efivar_ssdt entirely
efi/libstub: Descriptions for stub helper functions
efi/libstub: Fix path separator regression
efi/libstub: Fix missing-prototype warning for skip_spaces()
efi: Replace zero-length array and use struct_size() helper
efivarfs: Don't return -EINTR when rate-limiting reads
efivarfs: Update inode modification time for successful writes
efi/esrt: Fix reference count leak in esre_create_sysfs_entry.
efi/tpm: Verify event log header before parsing
efi/x86: Fix build with gcc 4
Pull scheduler fixes from Borislav Petkov:
"The most anticipated fix in this pull request is probably the horrible
build fix for the RANDSTRUCT fail that didn't make -rc2. Also included
is the cleanup that removes those BUILD_BUG_ON()s and replaces it with
ugly unions.
Also included is the try_to_wake_up() race fix that was first
triggered by Paul's RCU-torture runs, but was independently hit by
Dave Chinner's fstest runs as well"
* tag 'sched_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/cfs: change initial value of runnable_avg
smp, irq_work: Continue smp_call_function*() and irq_work*() integration
sched/core: s/WF_ON_RQ/WQ_ON_CPU/
sched/core: Fix ttwu() race
sched/core: Fix PI boosting between RT and DEADLINE tasks
sched/deadline: Initialize ->dl_boosted
sched/core: Check cpus_mask, not cpus_ptr in __set_cpus_allowed_ptr(), to fix mask corruption
sched/core: Fix CONFIG_GCC_PLUGIN_RANDSTRUCT build fail
Pull x86 fixes from Borislav Petkov:
- AMD Memory bandwidth counter width fix, by Babu Moger.
- Use the proper length type in the 32-bit truncate() syscall variant,
by Jiri Slaby.
- Reinit IA32_FEAT_CTL during wakeup to fix the case where after
resume, VMXON would #GP due to VMX not being properly enabled, by
Sean Christopherson.
- Fix a static checker warning in the resctrl code, by Dan Carpenter.
- Add a CR4 pinning mask for bits which cannot change after boot, by
Kees Cook.
- Align the start of the loop of __clear_user() to 16 bytes, to improve
performance on AMD zen1 and zen2 microarchitectures, by Matt Fleming.
* tag 'x86_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm/64: Align start of __clear_user() loop to 16-bytes
x86/cpu: Use pinning mask for CR4 bits needing to be 0
x86/resctrl: Fix a NULL vs IS_ERR() static checker warning in rdt_cdp_peer_get()
x86/cpu: Reinitialize IA32_FEAT_CTL MSR on BSP during wakeup
syscalls: Fix offset type of ksys_ftruncate()
x86/resctrl: Fix memory bandwidth counter width for AMD
Pull RCU-vs-KCSAN fixes from Borislav Petkov:
"A single commit that uses "arch_" atomic operations to avoid the
instrumentation that comes with the non-"arch_" versions.
In preparation for that commit, it also has another commit that makes
these "arch_" atomic operations available to generic code.
Without these commits, KCSAN uses can see pointless errors"
* tag 'rcu_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rcu: Fixup noinstr warnings
locking/atomics: Provide the arch_atomic_ interface to generic code
Pull objtool fixes from Borislav Petkov:
"Three fixes from Peter Zijlstra suppressing KCOV instrumentation in
noinstr sections.
Peter Zijlstra says:
"Address KCOV vs noinstr. There is no function attribute to
selectively suppress KCOV instrumentation, instead teach objtool
to NOP out the calls in noinstr functions"
This cures a bunch of KCOV crashes (as used by syzcaller)"
* tag 'objtool_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix noinstr vs KCOV
objtool: Provide elf_write_{insn,reloc}()
objtool: Clean up elf_write() condition
Pull x86 entry fixes from Borislav Petkov:
"This is the x86/entry urgent pile which has accumulated since the
merge window.
It is not the smallest but considering the almost complete entry core
rewrite, the amount of fixes to follow is somewhat higher than usual,
which is to be expected.
Peter Zijlstra says:
'These patches address a number of instrumentation issues that were
found after the x86/entry overhaul. When combined with rcu/urgent
and objtool/urgent, these patches make UBSAN/KASAN/KCSAN happy
again.
Part of making this all work is bumping the minimum GCC version for
KASAN builds to gcc-8.3, the reason for this is that the
__no_sanitize_address function attribute is broken in GCC releases
before that.
No known GCC version has a working __no_sanitize_undefined, however
because the only noinstr violation that results from this happens
when an UB is found, we treat it like WARN. That is, we allow it to
violate the noinstr rules in order to get the warning out'"
* tag 'x86_entry_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Fix #UD vs WARN more
x86/entry: Increase entry_stack size to a full page
x86/entry: Fixup bad_iret vs noinstr
objtool: Don't consider vmlinux a C-file
kasan: Fix required compiler version
compiler_attributes.h: Support no_sanitize_undefined check with GCC 4
x86/entry, bug: Comment the instrumentation_begin() usage for WARN()
x86/entry, ubsan, objtool: Whitelist __ubsan_handle_*()
x86/entry, cpumask: Provide non-instrumented variant of cpu_is_offline()
compiler_types.h: Add __no_sanitize_{address,undefined} to noinstr
kasan: Bump required compiler version
x86, kcsan: Add __no_kcsan to noinstr
kcsan: Remove __no_kcsan_or_inline
x86, kcsan: Remove __no_kcsan_or_inline usage
Some performance regression on reaim benchmark have been raised with
commit 070f5e860e ("sched/fair: Take into account runnable_avg to classify group")
The problem comes from the init value of runnable_avg which is initialized
with max value. This can be a problem if the newly forked task is finally
a short task because the group of CPUs is wrongly set to overloaded and
tasks are pulled less agressively.
Set initial value of runnable_avg equals to util_avg to reflect that there
is no waiting time so far.
Fixes: 070f5e860e ("sched/fair: Take into account runnable_avg to classify group")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200624154422.29166-1-vincent.guittot@linaro.org
Paul reported rcutorture occasionally hitting a NULL deref:
sched_ttwu_pending()
ttwu_do_wakeup()
check_preempt_curr() := check_preempt_wakeup()
find_matching_se()
is_same_group()
if (se->cfs_rq == pse->cfs_rq) <-- *BOOM*
Debugging showed that this only appears to happen when we take the new
code-path from commit:
2ebb177175 ("sched/core: Offload wakee task activation if it the wakee is descheduling")
and only when @cpu == smp_processor_id(). Something which should not
be possible, because p->on_cpu can only be true for remote tasks.
Similarly, without the new code-path from commit:
c6e7bd7afa ("sched/core: Optimize ttwu() spinning on p->on_cpu")
this would've unconditionally hit:
smp_cond_load_acquire(&p->on_cpu, !VAL);
and if: 'cpu == smp_processor_id() && p->on_cpu' is possible, this
would result in an instant live-lock (with IRQs disabled), something
that hasn't been reported.
The NULL deref can be explained however if the task_cpu(p) load at the
beginning of try_to_wake_up() returns an old value, and this old value
happens to be smp_processor_id(). Further assume that the p->on_cpu
load accurately returns 1, it really is still running, just not here.
Then, when we enqueue the task locally, we can crash in exactly the
observed manner because p->se.cfs_rq != rq->cfs_rq, because p's cfs_rq
is from the wrong CPU, therefore we'll iterate into the non-existant
parents and NULL deref.
The closest semi-plausible scenario I've managed to contrive is
somewhat elaborate (then again, actual reproduction takes many CPU
hours of rcutorture, so it can't be anything obvious):
X->cpu = 1
rq(1)->curr = X
CPU0 CPU1 CPU2
// switch away from X
LOCK rq(1)->lock
smp_mb__after_spinlock
dequeue_task(X)
X->on_rq = 9
switch_to(Z)
X->on_cpu = 0
UNLOCK rq(1)->lock
// migrate X to cpu 0
LOCK rq(1)->lock
dequeue_task(X)
set_task_cpu(X, 0)
X->cpu = 0
UNLOCK rq(1)->lock
LOCK rq(0)->lock
enqueue_task(X)
X->on_rq = 1
UNLOCK rq(0)->lock
// switch to X
LOCK rq(0)->lock
smp_mb__after_spinlock
switch_to(X)
X->on_cpu = 1
UNLOCK rq(0)->lock
// X goes sleep
X->state = TASK_UNINTERRUPTIBLE
smp_mb(); // wake X
ttwu()
LOCK X->pi_lock
smp_mb__after_spinlock
if (p->state)
cpu = X->cpu; // =? 1
smp_rmb()
// X calls schedule()
LOCK rq(0)->lock
smp_mb__after_spinlock
dequeue_task(X)
X->on_rq = 0
if (p->on_rq)
smp_rmb();
if (p->on_cpu && ttwu_queue_wakelist(..)) [*]
smp_cond_load_acquire(&p->on_cpu, !VAL)
cpu = select_task_rq(X, X->wake_cpu, ...)
if (X->cpu != cpu)
switch_to(Y)
X->on_cpu = 0
UNLOCK rq(0)->lock
However I'm having trouble convincing myself that's actually possible
on x86_64 -- after all, every LOCK implies an smp_mb() there, so if ttwu
observes ->state != RUNNING, it must also observe ->cpu != 1.
(Most of the previous ttwu() races were found on very large PowerPC)
Nevertheless, this fully explains the observed failure case.
Fix it by ordering the task_cpu(p) load after the p->on_cpu load,
which is easy since nothing actually uses @cpu before this.
Fixes: c6e7bd7afa ("sched/core: Optimize ttwu() spinning on p->on_cpu")
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200622125649.GC576871@hirez.programming.kicks-ass.net
syzbot reported the following warning:
WARNING: CPU: 1 PID: 6351 at kernel/sched/deadline.c:628
enqueue_task_dl+0x22da/0x38a0 kernel/sched/deadline.c:1504
At deadline.c:628 we have:
623 static inline void setup_new_dl_entity(struct sched_dl_entity *dl_se)
624 {
625 struct dl_rq *dl_rq = dl_rq_of_se(dl_se);
626 struct rq *rq = rq_of_dl_rq(dl_rq);
627
628 WARN_ON(dl_se->dl_boosted);
629 WARN_ON(dl_time_before(rq_clock(rq), dl_se->deadline));
[...]
}
Which means that setup_new_dl_entity() has been called on a task
currently boosted. This shouldn't happen though, as setup_new_dl_entity()
is only called when the 'dynamic' deadline of the new entity
is in the past w.r.t. rq_clock and boosted tasks shouldn't verify this
condition.
Digging through the PI code I noticed that what above might in fact happen
if an RT tasks blocks on an rt_mutex hold by a DEADLINE task. In the
first branch of boosting conditions we check only if a pi_task 'dynamic'
deadline is earlier than mutex holder's and in this case we set mutex
holder to be dl_boosted. However, since RT 'dynamic' deadlines are only
initialized if such tasks get boosted at some point (or if they become
DEADLINE of course), in general RT 'dynamic' deadlines are usually equal
to 0 and this verifies the aforementioned condition.
Fix it by checking that the potential donor task is actually (even if
temporary because in turn boosted) running at DEADLINE priority before
using its 'dynamic' deadline value.
Fixes: 2d3d891d33 ("sched/deadline: Add SCHED_DEADLINE inheritance logic")
Reported-by: syzbot+119ba87189432ead09b4@syzkaller.appspotmail.com
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Tested-by: Daniel Wagner <dwagner@suse.de>
Link: https://lkml.kernel.org/r/20181119153201.GB2119@localhost.localdomain
syzbot reported the following warning triggered via SYSC_sched_setattr():
WARNING: CPU: 0 PID: 6973 at kernel/sched/deadline.c:593 setup_new_dl_entity /kernel/sched/deadline.c:594 [inline]
WARNING: CPU: 0 PID: 6973 at kernel/sched/deadline.c:593 enqueue_dl_entity /kernel/sched/deadline.c:1370 [inline]
WARNING: CPU: 0 PID: 6973 at kernel/sched/deadline.c:593 enqueue_task_dl+0x1c17/0x2ba0 /kernel/sched/deadline.c:1441
This happens because the ->dl_boosted flag is currently not initialized by
__dl_clear_params() (unlike the other flags) and setup_new_dl_entity()
rightfully complains about it.
Initialize dl_boosted to 0.
Fixes: 2d3d891d33 ("sched/deadline: Add SCHED_DEADLINE inheritance logic")
Reported-by: syzbot+5ac8bac25f95e8b221e7@syzkaller.appspotmail.com
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Daniel Wagner <dwagner@suse.de>
Link: https://lkml.kernel.org/r/20200617072919.818409-1-juri.lelli@redhat.com
This function is concerned with the long-term CPU mask, not the
transitory mask the task might have while migrate disabled. Before
this patch, if a task was migrate-disabled at the time
__set_cpus_allowed_ptr() was called, and the new mask happened to be
equal to the CPU that the task was running on, then the mask update
would be lost.
Signed-off-by: Scott Wood <swood@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200617121742.cpxppyi7twxmpin7@linutronix.de
i.MX fixes for 5.8:
- Fix LDO1 and LDO2 voltage range for a couple of i.MX8M board device
trees.
- Fix i.MX8MP UID fuse offset in i.MX8M SoC driver.
- Fix watchdog configuration in imx6ul-kontron device tree.
- Fix one build warning seen on building soc-imx8m driver with
x86_64-randconfig.
- Add missing put_device() call for a couple of mach-imx PM functions.
* tag 'imx-fixes-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx8m: fix build warning
ARM: imx6: add missing put_device() call in imx6q_suspend_init()
ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram()
soc: imx8m: Correct i.MX8MP UID fuse offset
ARM: dts: imx6ul-kontron: Change WDOG_ANY signal from push-pull to open-drain
ARM: dts: imx6ul-kontron: Move watchdog from Kontron i.MX6UL/ULL board to SoM
arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2
arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage range
arm64: dts: imx8mm-evk: correct ldo1/ldo2 voltage range
Link: https://lore.kernel.org/r/20200624111725.GA24312@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM/ARM64/MIPS SoCs drivers fixes
for 5.8, please pull the following:
- Andy provides a fix for the Raspberry Pi firmware driver to print the
correct time upon boot. This is a fallout from a converstion to use
the ptT format
* tag 'arm-soc/for-5.8/drivers-fixes' of https://github.com/Broadcom/stblinux:
ARM: bcm2835: Fix integer overflow in rpi_firmware_print_firmware_revision()
Link: https://lore.kernel.org/r/20200619202250.19029-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
5.8, please pull the following:
- Rafal adds a missing 'device_type' property to the Luxul XWC-2000
required for the memory nodes to be correctly parsed by Linux
- Matthew provides two fixes for the NSP SoCs, one to disable the PL330
DMA controller by default since it can be left in reset by the
bootloader and the second to correct the flow accelerator mailbox node
* tag 'arm-soc/for-5.8/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: NSP: Correct FA2 mailbox node
ARM: dts: NSP: Disable PL330 by default, add dma-coherent property
ARM: dts: BCM5301X: Add missing memory "device_type" for Luxul XWC-2000
Link: https://lore.kernel.org/r/20200619202250.19029-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This reverts commit 7b8e0188fa.
Initially, STiH410-B2260 was supposed to be secured, that's why
l2c_write_sec was stubbed to avoid secure register access from
non secure world.
But by default, STiH410-B2260 is running in non secure mode,
so L2 cache register accesses are authorized, l2c_write_sec stub
is not needed.
With this patch, L2 cache is configured and performance are enhanced.
Link: https://lore.kernel.org/r/20200618172456.29475-1-patrice.chotard@st.com
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Cc: Alain Volmat <alain.volmat@st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Few dts fixes for omaps for v5.8
Few fixes for various devices:
- Prevent pocketgeagle header line signal from accidentally setting
micro-SD write protection signal by removing the default mux
- Fix NFSroot flakeyness after resume for duover by switching the
smsc911x gpio interrupt to back to level sensitive
- Fix regression for omap4 clockevent source after recent system
timer changes
- Yet another ethernet regression fix for the "rgmii" vs "rgmii-rxid"
phy-mode
* tag 'omap-for-v5.8/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am5729: beaglebone-ai: fix rgmii phy-mode
ARM: dts: Fix omap4 system timer source clocks
ARM: dts: Fix duovero smsc interrupt for suspend
ARM: dts: am335x-pocketbeagle: Fix mmc0 Write Protect
Link: https://lore.kernel.org/r/pull-1592499282-121092@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Missed sdhci patch for am3 and am4
I forgot to send a pull request earlier for converting am3 and am4 to
use sdhci-omap driver instead of the old omap_hsmmc driver.
There was a display subsystem related suspend and resume regression found
recently and looks like I forgot to send a pull request for this patch
while debugging the regression. This patch has been tested without the
display subsystem, and has been in Linux next for several weeks now, so
would be good to have merged for v5.8.
* tag 'omap-for-v5.8/dt-missed-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Move am33xx and am43xx mmc nodes to sdhci-omap driver
Link: https://lore.kernel.org/r/pull-1591637467-607254@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes for omaps for v5.8
The recent display subsystem (DSS) related platform data changes caused
display related regressions for suspend and resume. Looks like I only
tested suspend and resume before dropping the legacy platform data, and
forgot to test it after dropping it. Turns out the main issue was that
we no longer have platform code calling pm_runtime_suspend for DSS like
we did for the legacy platform data case, and that fix is still being
discussed on the dri-devel list and will get merged separately. The DSS
related testing exposed a pile other other display related issues that
also need fixing though:
- Fix ti-sysc optional clock handling and reset status checks
for devices that reset automatically in idle like DSS
- Ignore ti-sysc clockactivity bit unless separately requested
to avoid unexpected performance issues
- Init ti-sysc framedonetv_irq to true and disable for am4
- Avoid duplicate DSS reset for legacy mode with dts data
- Remove LCD timings for am4 as they cause warnings now that we're
using generic panels
Then there is a pile of other fixes not related to the DSS:
- Fix omap_prm reset deassert as we still have drivers setting the
pm_runtime_irq_safe() flag
- Flush posted write for ti-sysc enable and disable
- Fix droid4 spi related errors with spi flags
- Fix am335x USB range and a typo for softreset
- Fix dra7 timer nodes for clocks for IPU and DSP
- Drop duplicate mailboxes after mismerge for dra7
* tag 'omap-for-v5.8/fixes-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
Revert "bus: ti-sysc: Increase max softreset wait"
ARM: dts: am437x-epos-evm: remove lcd timings
ARM: dts: am437x-gp-evm: remove lcd timings
ARM: dts: am437x-sk-evm: remove lcd timings
ARM: dts: dra7-evm-common: Fix duplicate mailbox nodes
ARM: dts: dra7: Fix timer nodes properly for timer_sys_ck clocks
ARM: dts: Fix am33xx.dtsi ti,sysc-mask wrong softreset flag
ARM: dts: Fix am33xx.dtsi USB ranges length
bus: ti-sysc: Increase max softreset wait
ARM: OMAP2+: Fix legacy mode dss_reset
bus: ti-sysc: Fix uninitialized framedonetv_irq
bus: ti-sysc: Ignore clockactivity unless specified as a quirk
bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit
ARM: dts: omap4-droid4: Fix spi configuration and increase rate
bus: ti-sysc: Flush posted write on enable and disable
soc: ti: omap-prm: use atomic iopoll instead of sleeping one
Link: https://lore.kernel.org/r/pull-1591889257-410830@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
